src/Makefile

   1 # Makefile for Vim on Unix and Unix-like systems        vim:ts=8:sw=8:tw=78
   2 #
   3 # This Makefile is loosely based on the GNU Makefile conventions found in
   4 # standards.info.
   5 #
   6 # Compiling Vim, summary:
   7 #
   8 #       3. make
   9 #       5. make install
  10 #
  11 # Compiling Vim, details:
  12 #
  13 # Edit this file for adjusting to your system. You should not need to edit any
  14 # other file for machine specific things!
  15 # The name of this file MUST be Makefile (note the uppercase 'M').
  16 #
  17 # 1. Edit this Makefile  {{{1
  18 #       The defaults for Vim should work on most machines, but you may want to
  19 #       uncomment some lines or make other changes below to tune it to your
  20 #       system, compiler or preferences.  Uncommenting means that the '#' in
  21 #       the first column of a line is removed.
  22 #       - If you want a version of Vim that is small and starts up quickly,
  23 #         you might want to disable the GUI, X11, Perl, Python and Tcl.
  24 #       - Uncomment the line with --disable-gui if you have Motif, GTK and/or
  25 #         Athena but don't want to make gvim (the GUI version of Vim with nice
  26 #         menus and scrollbars, but makes Vim bigger and startup slower).
  27 #       - Uncomment --disable-darwin if on Mac OS X but you want to compile a
  28 #         Unix version.
  29 #       - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
  30 #         want to disable using X11 libraries.  This speeds up starting Vim,
  31 #         but the window title will not be set and the X11 selection can not
  32 #         used.
  33 #       - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the
  34 #         X11 Session Management Protocol (XSMP) library (libSM) but do not
  35 #         want to use it.
  36 #         This can speedup Vim startup but Vim loses the ability to catch the
  37 #         user logging out from session-managers like GNOME and work
  38 #         could be lost.
  39 #       - Uncomment one or more of these lines to include an interface;
  40 #         each makes Vim quite a bit bigger:
  41 #               --enable-perlinterp     for Perl interpreter
  42 #               --enable-pythoninterp   for Python interpreter
  43 #               --enable-rubyinterp     for Ruby interpreter
  44 #               --enable-tclinterp      for Tcl interpreter
  45 #               --enable-cscope         for Cscope interface
  46 #       - Uncomment one of the lines with --with-features= to enable a set of
  47 #         features (but not the interfaces just mentioned).
  48 #       - Uncomment the line with --disable-acl to disable ACL support even
  49 #         though your system supports it.
  50 #       - Uncomment the line with --disable-gpm to disable gpm support
  51 #         even though you have gpm libraries and includes.
  52 #       - Uncomment the line with --disable-sysmouse to disable sysmouse
  53 #         support even though you have /dev/sysmouse and includes.
  54 #       - Uncomment one of the lines with CFLAGS and/or CC if you have
  55 #         something very special or want to tune the optimizer.
  56 #       - Search for the name of your system to see if it needs anything
  57 #         special.
  58 #       - A few versions of make use '.include "file"' instead of 'include
  59 #         file'.  Adjust the include line below if yours does.
  60 #
  61 # 2. Edit feature.h  {{{1
  62 #       Only if you do not agree with the default compile features, e.g.:
  63 #       - you want Vim to be as vi compatible as it can be
  64 #       - you want to use Emacs tags files
  65 #       - you want right-to-left editing (Hebrew)
  66 #       - you want 'langmap' support (Greek)
  67 #       - you want to remove features to make Vim smaller
  68 #
  69 # 3. "make"  {{{1
  70 #       Will first run ./configure with the options in this file. Then it will
  71 #       start make again on this Makefile to do the compiling. You can also do
  72 #       this in two steps with:
  73 #               make config
  74 #               make
  75 #       The configuration phase creates/overwrites auto/config.h and
  76 #       auto/config.mk.
  77 #       The configure script is created with "make autoconf".  It can detect
  78 #       different features of your system and act accordingly.  However, it is
  79 #       not correct for all systems.  Check this:
  80 #       - If you have X windows, but configure could not find it or reported
  81 #         another include/library directory then you wanted to use, you have
  82 #         to set CONF_OPT_X below.  You might also check the installation of
  83 #         xmkmf.
  84 #       - If you have --enable-gui=motif and have Motif on your system, but
  85 #         configure reports "checking for location of gui... <not found>", you
  86 #         have to set GUI_INC_LOC and GUI_LIB_LOC below.
  87 #       If you changed something, do this to run configure again:
  88 #               make reconfig
  89 #
  90 #       - If you do not trust the automatic configuration code, then inspect
  91 #         auto/config.h and auto/config.mk, before starting the actual build
  92 #         phase. If possible edit this Makefile, rather than auto/config.mk --
  93 #         especially look at the definition of VIMLOC below. Note that the
  94 #         configure phase overwrites auto/config.mk and auto/config.h again.
  95 #       - If you get error messages, find out what is wrong and try to correct
  96 #         it in this Makefile. You may need to do "make reconfig" when you
  97 #         change anything that configure uses (e.g. switching from an old C
  98 #         compiler to an ANSI C compiler). Only when auto/configure does
  99 #         something wrong you may need to change one of the other files. If
 100 #         you find a clean way to fix the problem, consider sending a note to
 101 #         the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim
 102 #         (Bram@vim.org). Don't bother to do that when you made a hack
 103 #         solution for a non-standard system.
 104 #
 105 # 4. "make test"  {{{1
 106 #       This is optional.  This will run Vim scripts on a number of test
 107 #       files, and compare the produced output with the expected output.
 108 #       If all is well, you will get the "ALL DONE" message in the end.  See
 109 #       below (search for "/^test").
 110 #
 111 # 5. "make install"  {{{1
 112 #       If the new Vim seems to be working OK you can install it and the
 113 #       documentation in the appropriate location. The default is
 114 #       "/usr/local".  Change "prefix" below to change the location.
 115 #       "auto/pathdef.c" will be compiled again after changing this to make
 116 #       the executable know where the help files are located.
 117 #       Note that any existing executable is removed or overwritten.  If you
 118 #       want to keep it you will have to make a backup copy first.
 119 #       The runtime files are in a different directory for each version.  You
 120 #       might want to delete an older version.
 121 #       If you don't want to install everything, there are other targets:
 122 #               make installvim         only installs Vim, not the tools
 123 #               make installvimbin      only installs the Vim executable
 124 #               make installruntime     installs most of the runtime files
 125 #               make installrtbase      only installs the Vim help and
 126 #                                                       runtime files
 127 #               make installlinks       only installs the Vim binary links
 128 #               make installmanlinks    only installs the Vim manpage links
 129 #               make installmacros      only installs the Vim macros
 130 #               make installtutorbin    only installs the Vim tutor program
 131 #               make installtutor       only installs the Vim tutor files
 132 #               make installspell       only installs the spell files
 133 #               make installtools       only installs xxd
 134 #       If you install Vim, not to install for real but to prepare a package
 135 #       or RPM, set DESTDIR to the root of the tree.
 136 #
 137 # 6. Use Vim until a new version comes out.  {{{1
 138 #
 139 # 7. "make uninstall_runtime"  {{{1
 140 #       Will remove the runtime files for the current version.  This is safe
 141 #       to use while another version is being used, only version-specific
 142 #       files will be deleted.
 143 #       To remove the runtime files of another version:
 144 #               make uninstall_runtime VIMRTDIR=/vim54
 145 #       If you want to delete all installed files, use:
 146 #               make uninstall
 147 #       Note that this will delete files that have the same name for any
 148 #       version, thus you might need to do a "make install" soon after this.
 149 #       Be careful not to remove a version of Vim that is still being used!
 150 #       To find out which files and directories will be deleted, use:
 151 #               make -n uninstall
 152 # }}}
 153 #
 154 ### This Makefile has been successfully tested on many systems. {{{
 155 ### Only the ones that require special options are mentioned here.
 156 ### Check the (*) column for remarks, listed below.
 157 ### Later code changes may cause small problems, otherwise Vim is supposed to
 158 ### compile and run without problems.
 159
 160 #system:              configurations:                version (*) tested by:
 161 #-------------        ------------------------       -------  -  ----------
 162 #AIX 3.2.5            cc (not gcc)   -                  4.5  (M) Will Fiveash
 163 #AIX 4                cc             +X11 -GUI          3.27 (4) Axel Kielhorn
 164 #AIX 4.1.4            cc             +X11 +GUI          4.5  (5) Nico Bakker
 165 #AIX 4.2.1            cc                                5.2k (C) Will Fiveash
 166 #AIX 4.3.3.12         xic 3.6.6                         5.6  (5) David R. Favor
 167 #A/UX 3.1.1           gcc            +X11               4.0  (6) Jim Jagielski
 168 #BeOS PR              mwcc DR3                          5.0n (T) Olaf Seibert
 169 #BSDI 2.1 (x86)       shlicc2 gcc-2.6.3 -X11 X11R6      4.5  (1) Jos Backus
 170 #BSD/OS 3.0 (x86)     gcc gcc-2.7.2.1 -X11 X11R6        4.6c (1) Jos Backus
 171 #CX/UX 6.2            cc             +X11 +GUI_Mofif    5.4  (V) Kipp E. Howard
 172 #DG/UX 5.4*           gcc 2.5.8      GUI                5.0e (H) Jonas Schlein
 173 #DG/UX 5.4R4.20       gcc 2.7.2      GUI                5.0s (H) Rocky Olive
 174 #HP-UX (most)         c89 cc                            5.1  (2) Bram Moolenaar
 175 #HP-UX_9.04           cc             +X11 +Motif        5.0  (2) Carton Lao
 176 #Irix 6.3 (O2)        cc             ?                  4.5  (L) Edouard Poor
 177 #Irix 6.4             cc             ?                  5.0m (S) Rick Sayre
 178 #Irix 6.5             cc             ?                  6.0  (S) David Harrison
 179 #Irix 64 bit                                            4.5  (K) Jon Wright
 180 #Linux 2.0            gcc-2.7.2      Infomagic Motif    4.3  (3) Ronald Rietman
 181 #Linux 2.0.31         gcc            +X11 +GUI Athena   5.0w (U) Darren Hiebert
 182 #LynxOS 3.0.1         2.9-gnupro-98r2 +X11 +GUI Athena  5.7.1(O) Lorenz Hahn
 183 #LynxOS 3.1.0         2.9-gnupro-98r2 +X11 +GUI Athena  5.7.1(O) Lorenz Hahn
 184 #NEC UP4800 UNIX_SV 4.2MP  cc        +X11R6 Motif,Athena4.6b (Q) Lennart Schultz
 185 #NetBSD 1.0A          gcc-2.4.5      -X11 -GUI          3.21 (X) Juergen Weigert
 186 #QNX 4.2              wcc386-10.6    -X11               4.2  (D) G.F. Desrochers
 187 #QNX 4.23             Watcom         -X11               4.2  (F) John Oleynick
 188 #SCO Unix v3.2.5      cc             +X11 Motif         3.27 (C) M. Kuperblum
 189 #SCO Open Server 5    gcc 2.7.2.3    +X11 +GUI Motif    5.3  (A) Glauber Ribeiro
 190 #SINIX-N 5.43 RM400 R4000   cc       +X11 +GUI          5.0l (I) Martin Furter
 191 #SINIX-Z 5.42 i386    gcc 2.7.2.3    +X11 +GUI Motif    5.1  (I) Joachim Fehn
 192 #SINIX-Y 5.43 RM600 R4000  gcc 2.7.2.3 +X11 +GUI Motif  5.1  (I) Joachim Fehn
 193 #Reliant/SINIX 5.44   cc             +X11 +GUI          5.5a (I) B. Pruemmer
 194 #SNI Targon31 TOS 4.1.11 gcc-2.4.5   +X11 -GUI          4.6c (B) Paul Slootman
 195 #Solaris 2.4 (Sparc)  cc             +X11 +GUI          3.29 (9) Glauber
 196 #Solaris 2.4/2.5      clcc           +X11 -GUI openwin  3.20 (7) Robert Colon
 197 #Solaris 2.5 (sun4m)  cc (SC4.0)     +X11R6 +GUI (CDE)  4.6b (E) Andrew Large
 198 #Solaris 2.5          cc             +X11 +GUI Athena   4.2  (9) Sonia Heimann
 199 #Solaris 2.5          gcc 2.5.6      +X11 Motif         5.0m (R) Ant. Colombo
 200 #Solaris 2.6          gcc 2.8.1      ncursus            5.3  (G) Larry W. Virden
 201 #Solaris with -lthread                                  5.5  (W) K. Nagano
 202 #Solaris              gcc                                    (b) Riccardo
 203 #SunOS 4.1.x                         +X11 -GUI          5.1b (J) Bram Moolenaar
 204 #SunOS 4.1.3_U1 (sun4c) gcc          +X11 +GUI Athena   5.0w (J) Darren Hiebert
 205 #SUPER-UX 6.2 (NEC SX-4) cc          +X11R6 Motif,Athena4.6b (P) Lennart Schultz
 206 #Tandem/NSK                                                  (c) Matthew Woehlke
 207 #Unisys 6035          cc             +X11 Motif         5.3  (8) Glauber Ribeiro
 208 #ESIX V4.2            cc             +X11               6.0  (a) Reinhard Wobst
 209 #Mac OS X 10.[23]     gcc            Carbon             6.2  (x) Bram Moolenaar
 210 # }}}
 211
 212 # (*)  Remarks: {{{
 213 #
 214 # (1)  Uncomment line below for shlicc2
 215 # (2)  HPUX with compile problems or wrong digraphs, uncomment line below
 216 # (3)  Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.
 217 #      And add "-lXpm" to MOTIF_LIBS2.
 218 # (4)  For cc the optimizer must be disabled (use CFLAGS= after running
 219 #      configure) (symptom: ":set termcap" output looks weird).
 220 # (5)  Compiler may need extra argument, see below.
 221 # (6)  See below for a few lines to uncomment
 222 # (7)  See below for lines which enable the use of clcc
 223 # (8)  Needs some EXTRA_LIBS, search for Unisys below
 224 # (9)  Needs an extra compiler flag to compile gui_at_sb.c, see below.
 225 # (A)  May need EXTRA_LIBS, see below
 226 # (B)  Can't compile GUI because there is no waitpid()...  Disable GUI below.
 227 # (C)  Force the use of curses instead of termcap, see below.
 228 # (D)  Uncomment lines below for QNX
 229 # (E)  You might want to use termlib instead of termcap, see below.
 230 # (F)  See below for instructions.
 231 # (G)  Using ncursus version 4.2 has reported to cause a crash.  Use the
 232 #      Sun cursus library instead.
 233 # (H)  See line for EXTRA_LIBS below.
 234 # (I)  SINIX-N 5.42 and 5.43 need some EXTRA_LIBS.  Also for Reliant-Unix.
 235 # (J)  If you get undefined symbols, see below for a solution.
 236 # (K)  See lines to uncomment below for machines with 64 bit pointers.
 237 # (L)  For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk
 238 # (M)  gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two
 239 #      characters instead of one).
 240 # (N)  SCO with decmouse.
 241 # (O)  LynxOS needs EXTRA_LIBS, see below.
 242 # (P)  For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.
 243 # (Q)  For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.
 244 # (R)  For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.
 245 # (S)  For Irix 6.x with MipsPro compiler, use -OPT:Olimit.  See line below.
 246 # (T)  See ../doc/os_beos.txt.
 247 # (U)  Must uncomment CONF_OPT_PYTHON option below to disable Python
 248 #      detection, since the configure script runs into an error when it
 249 #      detects Python (probably because of the bash shell).
 250 # (V)  See lines to uncomment below.
 251 # (X)  Need to use the .include "auto/config.mk" line below
 252 # (Y)  See line with c89 below
 253 # (Z)  See lines with cc or c89 below
 254 # (a)  See line with EXTRA_LIBS below.
 255 # (b)  When using gcc with the Solaris linker, make sure you don't use GNU
 256 #      strip, otherwise the binary may not run: "Cannot find ELF".
 257 # (c)  Add -lfloss to EXTRA_LIBS, see below.
 258 # (x)  When you get warnings for precompiled header files, run
 259 #      "sudo fixPrecomps".  Also see CONF_OPT_DARWIN below.
 260 # }}}
 261
 262
 263 #DO NOT CHANGE the next line, we need it for configure to find the compiler
 264 #instead of using the default from the "make" program.
 265 #Use a line further down to change the value for CC.
 266 CC=
 267
 268 # Change and use these defines if configure cannot find your Motif stuff.
 269 # Unfortunately there is no "standard" location for Motif. {{{
 270 # These defines can contain a single directory (recommended) or a list of
 271 # directories (for when you are working with several systems). The LAST
 272 # directory that exists is used.
 273 # When changed, run "make reconfig" next!
 274 #GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2
 275 #GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2
 276 ### Use these two lines for Infomagic Motif (3)
 277 #GUI_INC_LOC = -I/usr/X11R6/include
 278 #GUI_LIB_LOC = -L/usr/X11R6/lib
 279 # }}}
 280
 281 ######################## auto/config.mk ######################## {{{1
 282 # At this position auto/config.mk is included. When starting from the
 283 # distribution it is almost empty. After running auto/configure it contains
 284 # settings that have been discovered for your system. Settings below this
 285 # include override settings in auto/config.mk!
 286
 287 # Note: if auto/config.mk is lost somehow (e.g., because configure was
 288 # interrupted), create an empty auto/config.mk file and do "make config".
 289
 290 # (X) How to include auto/config.mk depends on the version of "make" you have,
 291 #     if the current choice doesn't work, try the other one.
 292
 293 include auto/config.mk
 294 #.include "auto/config.mk"
 295 CClink = $(CC)
 296
 297 #}}}
 298
 299 # Include the configuration choices first, so we can override everything
 300 # below. As shipped, this file contains a target that causes to run
 301 # configure. Once configure was run, this file contains a list of
 302 # make variables with predefined values instead. Thus any second invocation
 303 # of make, will build Vim.
 304
 305 # CONFIGURE - configure arguments {{{1
 306 # You can give a lot of options to configure.
 307 # Change this to your desire and do 'make config' afterwards
 308
 309 # examples (can only use one!):
 310 #CONF_ARGS = --exec-prefix=/usr
 311 #CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7
 312 #CONF_ARGS = --with-global-runtime=/etc/vim
 313 #CONF_ARGS = --with-local-dir=/usr/share
 314 #CONF_ARGS = --without-local-dir
 315
 316 # Use this one if you distribute a modified version of Vim.
 317 #CONF_ARGS = --with-modified-by="John Doe"
 318
 319 # GUI - For creating Vim with GUI (gvim) (B)
 320 # Uncomment this line when you don't want to get the GUI version, although you
 321 # have GTK, Motif and/or Athena.  Also use --without-x if you don't want X11
 322 # at all.
 323 #CONF_OPT_GUI = --disable-gui
 324
 325 # Uncomment one of these lines if you have that GUI but don't want to use it.
 326 # The automatic check will use another one that can be found.
 327 # Gnome is disabled by default, it may cause trouble.
 328 #CONF_OPT_GUI = --disable-gtk-check
 329 #CONF_OPT_GUI = --disable-gtk2-check
 330 #CONF_OPT_GUI = --enable-gnome-check
 331 #CONF_OPT_GUI = --enable-gnome2-check
 332 #CONF_OPT_GUI = --disable-motif-check
 333 #CONF_OPT_GUI = --disable-athena-check
 334 #CONF_OPT_GUI = --disable-nextaw-check
 335
 336 # Uncomment one of these lines to select a specific GUI to use.
 337 # When using "yes" or nothing, configure will use the first one found: GTK+,
 338 # Motif or Athena.
 339 #
 340 # GTK versions that are known not to work 100% are rejected.
 341 # Use "--disable-gtktest" to accept them anyway.
 342 #
 343 # GNOME means GTK with Gnome support.  If using GTK and --enable-gnome-check
 344 # is used then GNOME will automatically be used if it is found.  If you have
 345 # GNOME, but do not want to use it (e.g., want a GTK-only version), then use
 346 # --enable-gui=gtk or leave out --enable-gnome-check.
 347 #
 348 # If the selected GUI isn't found, the GUI is disabled automatically
 349 #CONF_OPT_GUI = --enable-gui=gtk
 350 #CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
 351 #CONF_OPT_GUI = --enable-gui=gtk2
 352 #CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest
 353 #CONF_OPT_GUI = --enable-gui=gnome
 354 #CONF_OPT_GUI = --enable-gui=gnome2
 355 #CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest
 356 #CONF_OPT_GUI = --enable-gui=motif
 357 #CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"
 358 #CONF_OPT_GUI = --enable-gui=athena
 359 #CONF_OPT_GUI = --enable-gui=nextaw
 360
 361 # DARWIN - detecting Mac OS X
 362 # Uncomment this line when you want to compile a Unix version of Vim on
 363 # Darwin.  None of the Mac specific options or files will be used.
 364 #CONF_OPT_DARWIN = --disable-darwin
 365
 366 # Select the architecture supported.  Default is to build for the current
 367 # platform.  Use "both" for a universal binary.  That probably doesn't work
 368 # when including Perl, Python, etc.
 369 #CONF_OPT_DARWIN = --with-mac-arch=i386
 370 #CONF_OPT_DARWIN = --with-mac-arch=ppc
 371 #CONF_OPT_DARWIN = --with-mac-arch=both
 372
 373 # PERL
 374 # Uncomment this when you want to include the Perl interface.
 375 # The Perl option sometimes causes problems, because it adds extra flags
 376 # to the command line.  If you see strange flags during compilation, check in
 377 # auto/config.mk where they come from.  If it's PERL_CFLAGS, try commenting
 378 # the next line.
 379 # When you get an error for a missing "perl.exp" file, try creating an emtpy
 380 # one: "touch perl.exp".
 381 # This requires at least "small" features, "tiny" doesn't work.
 382 #CONF_OPT_PERL = --enable-perlinterp
 383
 384 # PYTHON
 385 # Uncomment this when you want to include the Python interface.
 386 # NOTE: This may cause threading to be enabled, which has side effects (such
 387 # as using different libraries and debugging becomes more difficult).
 388 # NOTE: Using this together with Perl may cause a crash in initialization.
 389 #CONF_OPT_PYTHON = --enable-pythoninterp
 390
 391 # TCL
 392 # Uncomment this when you want to include the Tcl interface.
 393 #CONF_OPT_TCL = --enable-tclinterp
 394 #CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4
 395
 396 # RUBY
 397 # Uncomment this when you want to include the Ruby interface.
 398 #CONF_OPT_RUBY = --enable-rubyinterp
 399
 400 # MZSCHEME
 401 # Uncomment this when you want to include the MzScheme interface.
 402 #CONF_OPT_MZSCHEME = --enable-mzschemeinterp
 403 # PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works
 404 #CONF_OPT_PLTHOME  = --with-plthome=/usr/local/plt
 405 #CONF_OPT_PLTHOME  = --with-plthome=/usr/local/drscheme
 406 #CONF_OPT_PLTHOME  = --with-plthome=/home/me/mz
 407
 408 # CSCOPE
 409 # Uncomment this when you want to include the Cscope interface.
 410 #CONF_OPT_CSCOPE = --enable-cscope
 411
 412 # WORKSHOP - Sun Visual Workshop interface.  Only works with Motif!
 413 #CONF_OPT_WORKSHOP = --enable-workshop
 414
 415 # NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.
 416 # Motif version must have XPM libraries (see |workshop-xpm|).
 417 # Uncomment this when you do not want the netbeans interface.
 418 #CONF_OPT_NETBEANS = --disable-netbeans
 419
 420 # SNIFF - Include support for SNiFF+.
 421 #CONF_OPT_SNIFF = --enable-sniff
 422
 423 # MULTIBYTE - To edit multi-byte characters.
 424 # Uncomment this when you want to edit a multibyte language.
 425 # It's automatically enabled with big features or IME support.
 426 # Note: Compile on a machine where setlocale() actually works, otherwise the
 427 # configure tests may fail.
 428 #CONF_OPT_MULTIBYTE = --enable-multibyte
 429
 430 # NLS - National Language Support
 431 # Uncomment this when you do not want to support translated messages, even
 432 # though configure can find support for it.
 433 #CONF_OPT_NLS = --disable-nls
 434
 435 # XIM - X Input Method.  Special character input support for X11 (Chinese,
 436 # Japanese, special symbols, etc).  Also needed for dead-key support.
 437 # When omitted it's automatically enabled for the X-windows GUI.
 438 # HANGUL - Input Hangul (Korean) language using internal routines.
 439 # Uncomment one of these when you want to input a multibyte language.
 440 #CONF_OPT_INPUT = --enable-xim
 441 #CONF_OPT_INPUT = --disable-xim
 442 #CONF_OPT_INPUT = --enable-hangulinput
 443
 444 # FONTSET - X fontset support for output of languages with many characters.
 445 # Uncomment this when you want to output a multibyte language.
 446 #CONF_OPT_OUTPUT = --enable-fontset
 447
 448 # ACL - Uncomment this when you do not want to include ACL support, even
 449 # though your system does support it.  E.g., when it's buggy.
 450 #CONF_OPT_ACL = --disable-acl
 451
 452 # gpm - For mouse support on Linux console via gpm
 453 # Uncomment this when you do not want to include gpm support, even
 454 # though you have gpm libraries and includes.
 455 #CONF_OPT_GPM = --disable-gpm
 456
 457 # sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse
 458 # Uncomment this when you do not want do include sysmouse support, even
 459 # though you have /dev/sysmouse and includes.
 460 #CONF_OPT_SYSMOUSE = --disable-sysmouse
 461
 462 # FEATURES - For creating Vim with more or less features
 463 # Uncomment one of these lines when you want to include few to many features.
 464 # The default is "normal".
 465 #CONF_OPT_FEAT = --with-features=tiny
 466 #CONF_OPT_FEAT = --with-features=small
 467 #CONF_OPT_FEAT = --with-features=normal
 468 #CONF_OPT_FEAT = --with-features=big
 469 #CONF_OPT_FEAT = --with-features=huge
 470
 471 # COMPILED BY - For including a specific e-mail address for ":version".
 472 #CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"
 473
 474 # X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies
 475 # (otherwise Vim configure will try to include xterm titlebar access)
 476 # Also disable the GUI above, otherwise it will be included anyway.
 477 # When both GUI and X11 have been disabled this may save about 15% of the
 478 # code and make Vim startup quicker.
 479 #CONF_OPT_X = --without-x
 480
 481 # X WINDOWS DIRECTORY - specify X directories
 482 # If configure can't find you X stuff, or if you have multiple X11 derivatives
 483 # installed, you may wish to specify which one to use.
 484 # Select nothing to let configure choose.
 485 # This here selects openwin (as found on sun).
 486 #XROOT = /usr/openwin
 487 #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib
 488
 489 # X11 Session Management Protocol support
 490 # Vim will try to use XSMP to catch the user logging out if there are unsaved
 491 # files.  Uncomment this line to disable that (it prevents vim trying to open
 492 # communications with the session manager).
 493 #CONF_OPT_XSMP = --disable-xsmp
 494
 495 # You may wish to include xsmp but use exclude xsmp-interact if the logout
 496 # XSMP functionality does not work well with your session-manager (at time of
 497 # writing, this would be early GNOME-1 gnome-session: it 'freezes' other
 498 # applications after Vim has cancelled a logout (until Vim quits).  This
 499 # *might* be the Vim code, but is more likely a bug in early GNOME-1.
 500 # This disables the dialog that asks you if you want to save files or not.
 501 #CONF_OPT_XSMP = --disable-xsmp-interact
 502
 503 # COMPILER - Name of the compiler {{{1
 504 # The default from configure will mostly be fine, no need to change this, just
 505 # an example. If a compiler is defined here, configure will use it rather than
 506 # probing for one. It is dangerous to change this after configure was run.
 507 # Make will use your choice then -- but beware: Many things may change with
 508 # another compiler.  It is wise to run 'make reconfig' to start all over
 509 # again.
 510 #CC = cc
 511 #CC = gcc
 512
 513 # COMPILER FLAGS - change as you please. Either before running {{{1
 514 # configure or afterwards. For examples see below.
 515 # When using -g with some older versions of Linux you might get a
 516 # statically linked executable.
 517 # When not defined, configure will try to use -O2 -g for gcc and -O for cc.
 518 #CFLAGS = -g
 519 #CFLAGS = -O
 520
 521 # Optimization limits - depends on the compiler.  Automatic check in configure
 522 # doesn't work very well, because many compilers only give a warning for
 523 # unrecognized arguments.
 524 #CFLAGS = -O -OPT:Olimit=2600
 525 #CFLAGS = -O -Olimit 2000
 526 #CFLAGS = -O -FOlimit,2000
 527
 528 # Often used for GCC: mixed optimizing, lot of optimizing, debugging
 529 #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
 530 #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes
 531 #CFLAGS = -g -Wall -Wmissing-prototypes
 532 #CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
 533 #CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes
 534 #CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
 535
 536 # EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond
 537 # allocated memory (and makes every malloc()/free() very slow).
 538 # Electric Fence is free (search ftp sites).
 539 # You may want to set the EF_PROTECT_BELOW environment variable to check the
 540 # other side of allocated memory.
 541 # On FreeBSD you might need to enlarge the number of mmaps allowed.  Do this
 542 # as root: sysctl -w vm.max_proc_mmap=30000
 543 #EXTRA_LIBS = /usr/local/lib/libefence.a
 544
 545 # PURIFY - remove the # to use the "purify" program (hoi Nia++!)
 546 #PURIFY = purify
 547
 548 # NBDEBUG - debugging the netbeans interface.
 549 #EXTRA_DEFS = -DNBDEBUG
 550
 551 # }}}
 552
 553 # LINT - for running lint
 554 LINT_OPTIONS = -beprxzF
 555
 556 # PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.
 557 # Might not work with GUI or Perl.
 558 # For unknown reasons adding "-lc" fixes a linking problem with GCC.  That's
 559 # probably a bug in the "-pg" implementation.
 560 # Need to recompile everything after changing this: "make clean" "make".
 561 #PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING
 562 #PROFILE_LIBS = -pg
 563 #PROFILE_LIBS = -pg -lc
 564
 565 # MEMORY LEAK DETECTION
 566 # Requires installing the ccmalloc library.
 567 # Configuration is in the .ccmalloc or ~/.ccmalloc file.
 568 # Doesn't work very well, since memory linked to from global variables
 569 # (in libraries) is also marked as leaked memory.
 570 #PROFILE_CFLAGS = -DEXITFREE
 571 #PROFILE_LIBS = -lccmalloc
 572
 573 #####################################################
 574 ###  Specific systems, check if yours is listed!  ### {{{
 575 #####################################################
 576
 577 ### Uncomment things here only if the values chosen by configure are wrong.
 578 ### It's better to adjust configure.in and "make autoconf", if you can!
 579 ### Then send the required changes to configure.in to the bugs list.
 580
 581 ### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries
 582 ###
 583 #CC = shlicc2
 584 #CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin
 585
 586 ### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler
 587 ###     The first probably works on all systems
 588 ###     The second should work a bit better on newer systems
 589 ###     The third should work a bit better on HPUX 11.11
 590 ###     Information provided by: Richard Allen <ra@rhi.hi.is>
 591 #CC = c89 -D_HPUX_SOURCE
 592 #CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE
 593 #CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE
 594
 595 ### (2) For HP-UX: Enable the use of a different set of digraphs.  Use this
 596 ###     when the default (ISO) digraphs look completely wrong.
 597 ###     After changing this do "touch digraph.c; make".
 598 #EXTRA_DEFS = -DHPUX_DIGRAPHS
 599
 600 ### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes
 601 ###     is too small to compile many routines.  It produces too much defining
 602 ###     and no space errors.
 603 ###     Uncomment the following to specify a larger macro definition table.
 604 #CFLAGS = -Wp,-H256000
 605
 606 ### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with
 607 ###     libraries in /usr/lib instead of /lib (avoiding transition links).
 608 ###     Information provided by: David Green
 609 #XROOT = /usr
 610 #CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6
 611 #GUI_INC_LOC = -I/usr/include/Motif1.2
 612 #GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6
 613
 614 ### (5) AIX 4.1.4 with cc
 615 #CFLAGS = -O -qmaxmem=8192
 616
 617 ###     AIX with c89 (Walter Briscoe)
 618 #CC = c89
 619 #CPPFLAGS = -D_ALL_SOURCE
 620
 621 ###     AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)
 622 #       needed to avoid a problem where strings.h gets included
 623 #CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__
 624
 625 ### (W) Solaris with multi-threaded libraries (-lthread):
 626 ###     If suspending doesn't work properly, try using this line:
 627 #EXTRA_DEFS = -D_REENTRANT
 628
 629 ### (7) Solaris 2.4/2.5 with Centerline compiler
 630 #CC = clcc
 631 #X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
 632 #CFLAGS = -O
 633
 634 ### (9) Solaris 2.x with cc (SunPro), using Athena.
 635 ###     Only required for compiling gui_at_sb.c.
 636 ###     Symptom: "identifier redeclared: vim_XawScrollbarSetThumb"
 637 ###     Use one of the lines (either Full ANSI or no ANSI at all)
 638 #CFLAGS = $(CFLAGS) -Xc
 639 #CFLAGS = $(CFLAGS) -Xs
 640
 641 ### Solaris 2.3 with X11 and specific cc
 642 #CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib
 643
 644 ### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")
 645 #CC         = /usr/ucb/cc
 646 #EXTRA_LIBS = -R/usr/ucblib
 647
 648 ### Solaris with Forte Developer and FEAT_SUN_WORKSHOP
 649 # The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.
 650 #CC             = cc
 651 #XPM_DIR                = /usr/local/xpm/xpm-3.4k-solaris
 652 #XPM_LIB                = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm
 653 #XPM_IPATH      = -I$(XPM_DIR)/include
 654 #EXTRA_LIBS     = $(XPM_LIB)
 655 #EXTRA_IPATHS   = $(XPM_IPATH)
 656 #EXTRA_DEFS     = -xCC -DHAVE_X11_XPM_H
 657
 658 ### Solaris with workshop compilers: Vim is unstable when compiled with
 659 # "-fast".  Use this instead. (Shea Martin)
 660 #CFLAGS = -x02 -xtarget=ultra
 661
 662 ### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:
 663 #LDFLAGS = -lw -ldl -lXmu
 664 #GUI_LIB_LOC = -L/usr/local/lib
 665
 666 ### (8) Unisys 6035 (Glauber Ribeiro)
 667 #EXTRA_LIBS = -lnsl -lsocket -lgen
 668
 669 ### When builtin functions cause problems with gcc (for Sun 4.1.x)
 670 #CFLAGS = -O2 -Wall -traditional -Wno-implicit
 671
 672 ### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
 673 #EXTRA_DEFS = -DDOMAIN
 674 #CFLAGS= -O -A systype,bsd4.3
 675
 676 ### Coherent 4.2.10 on Intel 386 platform
 677 #EXTRA_DEFS = -Dvoid=int
 678 #EXTRA_LIBS = -lterm -lsocket
 679
 680 ### SCO 3.2, with different library name for terminfo
 681 #EXTRA_LIBS = -ltinfo
 682
 683 ### UTS2 for Amdahl UTS 2.1.x
 684 #EXTRA_DEFS = -DUTS2
 685 #EXTRA_LIBS = -lsocket
 686
 687 ### UTS4 for Amdahl UTS 4.x
 688 #EXTRA_DEFS = -DUTS4 -Xa
 689
 690 ### USL for Unix Systems Laboratories (SYSV 4.2)
 691 #EXTRA_DEFS = -DUSL
 692
 693 ### RISCos on MIPS without X11
 694 #EXTRA_DEFS = -DMIPS
 695
 696 ### RISCos on MIPS with X11
 697 #EXTRA_LIBS = -lsun
 698
 699 ### (6)  A/UX 3.1.1 with gcc (Jim Jagielski)
 700 #CC= gcc -D_POSIX_SOURCE
 701 #CFLAGS= -O2
 702 #EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11
 703
 704 ### (A)  Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)
 705 ###      Also use the CONF_TERM_LIB below!
 706 #EXTRA_LIBS = -lgen
 707
 708 ### (D)  QNX (by G.F. Desrochers)
 709 #CFLAGS = -g -O -mf -4
 710
 711 ### (F)  QNX (by John Oleynick)
 712 # 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment
 713 #    CONF_OPT_X = --without-x.
 714 # 2. make config
 715 # 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS.  It doesn't
 716 #       have -ldir (does config find it somewhere?) and -ltermcap has at
 717 #       least one problem so I use termlib.o instead.  The problem with
 718 #       termcap is that it segfaults if you call it with the name of
 719 #       a non-existent terminal type.
 720 # 4. edit auto/config.h and add #define USE_TMPNAM
 721 # 5. add termlib.o to OBJ
 722 # 6. make
 723
 724 ### (H)  for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)
 725 #EXTRA_LIBS = -lgen
 726
 727 ### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)
 728 #EXTRA_LIBS = -lgen -lnsl
 729 ###   For SINIX-Y this is needed for the right prototype of gettimeofday()
 730 #EXTRA_DEFS = -D_XPG_IV
 731
 732 ### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc
 733 #       Use both "-F O3" lines for optimization or the "-g" line for debugging
 734 #EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE
 735 #CFLAGS = -F O3 -DSINIXN
 736 #LDFLAGS = -F O3
 737 #CFLAGS = -g -DSINIXN
 738
 739 ### (P)  SCO 3.2.42, with different termcap names for some useful keys DJB
 740 #EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY
 741 #EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s
 742
 743 ### (P)  SuperUX 6.2 on NEC SX-4 (Lennart Schultz)
 744 #GUI_INC_LOC = -I/usr/include
 745 #GUI_LIB_LOC = -L/usr/lib
 746 #EXTRA_LIBS = -lgen
 747
 748 ### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)
 749 #GUI_INC_LOC = -I/usr/necccs/include
 750 #GUI_LIB_LOC = -L/usr/necccs/lib/X11R6
 751 #XROOT = /usr/necccs
 752 #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6
 753 #EXTRA_LIBS = -lsocket -lgen
 754
 755 ### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
 756 # Not needed for Irix 5.3, Ives Aerts reported
 757 #EXTRA_LIBS = -lmalloc -lc_s
 758 # Irix 4.0, when regexp and regcmp cannot be found when linking:
 759 #EXTRA_LIBS = -lmalloc -lc_s -lPW
 760
 761 ### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag:
 762 # Note: This newer option style is used with the MipsPro compilers ONLY if
 763 #       you are compiling an "n32" or "64" ABI binary (use either a -n32
 764 #       flag or a -64 flag for CFLAGS).  If you explicitly use a -o32 flag,
 765 #       then the CFLAGS option format will be the typical style (i.e.
 766 #       -Olimit 3000).
 767 #CFLAGS = -OPT:Olimit=3000 -O
 768
 769 ### (S) Irix 6.5 with MipsPro C compiler.  Try this as a test to see new
 770 #       compiler features!  Beware, the optimization is EXTREMELY thorough
 771 #       and takes quite a long time.
 772 # Note: See the note above.  Here, the -mips3 option automatically
 773 #       enables either the "n32" or "64" ABI, depending on what machine you
 774 #       are compiling on (n32 is explicitly enabled here, just to make sure).
 775 #CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
 776 #LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
 777
 778 ### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64)
 779 ###     Suggested by Jon Wright <jon@gate.sinica.edu.tw>.
 780 ###     Tested on R8000 IRIX6.1 Power Indigo2.
 781 ###     Check /etc/compiler.defaults for your compiler settings.
 782 # either (for 64 bit pointers) uncomment the following line
 783 #GUI_LIB_LOC = -L/usr/lib64
 784 # then
 785 # 1) make config
 786 # 2) edit auto/config.mk and delete the -lelf entry in the LIBS line
 787 # 3) make
 788 #
 789 # or (for 32bit pointers) uncomment the following line
 790 #EXTRA_DEFS = -n32
 791 #GUI_LIB_LOC = -L/usr/lib32
 792 # then
 793 # 1) make config
 794 # 2) edit auto/config.mk, add -n32 to LDFLAGS
 795 # 3) make
 796 #
 797 #Alternatively: use -o32 instead of -n32.
 798 ###
 799
 800 ### (C)  On SCO Unix v3.2.5 (and probably other versions) the termcap library,
 801 ###      which is found by configure, doesn't work correctly.  Symptom is the
 802 ###      error message "Termcap entry too long".  Uncomment the next line.
 803 ###      On AIX 4.2.1 (and other versions probably), libtermcap is reported
 804 ###      not to display properly.
 805 ### after changing this, you need to do "make reconfig".
 806 #CONF_TERM_LIB = --with-tlib=curses
 807
 808 ### (E)  If you want to use termlib library instead of the automatically found
 809 ###      one.  After changing this, you need to do "make reconfig".
 810 #CONF_TERM_LIB = --with-tlib=termlib
 811
 812 ### (a)  ESIX V4.2 (Reinhard Wobst)
 813 #EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext
 814
 815 ### (c)  Tandem/NSK (Matthew Woehlke)
 816 #EXTRA_LIBS = -lfloss
 817
 818 ### If you want to use ncurses library instead of the automatically found one
 819 ### after changing this, you need to do "make reconfig".
 820 #CONF_TERM_LIB = --with-tlib=ncurses
 821
 822 ### For GCC on MSDOS, the ".exe" suffix will be added.
 823 #EXEEXT = .exe
 824 #LNKEXT = .exe
 825
 826 ### (O)  For LynxOS 2.5.0, tested on PC.
 827 #EXTRA_LIBS = -lXext -lSM -lICE -lbsd
 828 ###      For LynxOS 3.0.1, tested on PPC
 829 #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11
 830 ###      For LynxOS 3.1.0, tested on PC
 831 #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu
 832
 833
 834 ### (V)  For CX/UX 6.2  (on Harris/Concurrent NightHawk 4800, 5800). Remove
 835 ###      -Qtarget if only in a 5800 environment.  (Kipp E. Howard)
 836 #CFLAGS = -O -Qtarget=m88110compat
 837 #EXTRA_LIBS = -lgen
 838
 839 ##################### end of system specific lines ################### }}}
 840
 841 ### Names of the programs and targets  {{{1
 842 VIMTARGET       = $(VIMNAME)$(EXEEXT)
 843 EXTARGET        = $(EXNAME)$(LNKEXT)
 844 VIEWTARGET      = $(VIEWNAME)$(LNKEXT)
 845 GVIMNAME        = g$(VIMNAME)
 846 GVIMTARGET      = $(GVIMNAME)$(LNKEXT)
 847 GVIEWNAME       = g$(VIEWNAME)
 848 GVIEWTARGET     = $(GVIEWNAME)$(LNKEXT)
 849 RVIMNAME        = r$(VIMNAME)
 850 RVIMTARGET      = $(RVIMNAME)$(LNKEXT)
 851 RVIEWNAME       = r$(VIEWNAME)
 852 RVIEWTARGET     = $(RVIEWNAME)$(LNKEXT)
 853 RGVIMNAME       = r$(GVIMNAME)
 854 RGVIMTARGET     = $(RGVIMNAME)$(LNKEXT)
 855 RGVIEWNAME      = r$(GVIEWNAME)
 856 RGVIEWTARGET    = $(RGVIEWNAME)$(LNKEXT)
 857 VIMDIFFNAME     = $(VIMNAME)diff
 858 GVIMDIFFNAME    = g$(VIMDIFFNAME)
 859 VIMDIFFTARGET   = $(VIMDIFFNAME)$(LNKEXT)
 860 GVIMDIFFTARGET  = $(GVIMDIFFNAME)$(LNKEXT)
 861 EVIMNAME        = e$(VIMNAME)
 862 EVIMTARGET      = $(EVIMNAME)$(LNKEXT)
 863 EVIEWNAME       = e$(VIEWNAME)
 864 EVIEWTARGET     = $(EVIEWNAME)$(LNKEXT)
 865
 866 ### Names of the tools that are also made  {{{1
 867 TOOLS = xxd/xxd$(EXEEXT)
 868
 869 ### Installation directories.  The defaults come from configure. {{{1
 870 #
 871 ### prefix      the top directory for the data (default "/usr/local")
 872 #
 873 # Uncomment the next line to install Vim in your home directory.
 874 #prefix = $(HOME)
 875
 876 ### exec_prefix is the top directory for the executable (default $(prefix))
 877 #
 878 # Uncomment the next line to install the Vim executable in "/usr/machine/bin"
 879 #exec_prefix = /usr/machine
 880
 881 ### BINDIR      dir for the executable   (default "$(exec_prefix)/bin")
 882 ### MANDIR      dir for the manual pages (default "$(prefix)/man")
 883 ### DATADIR     dir for the other files  (default "$(prefix)/lib" or
 884 #                                                 "$(prefix)/share")
 885 # They may be different when using different architectures for the
 886 # executable and a common directory for the other files.
 887 #
 888 # Uncomment the next line to install Vim in "/usr/bin"
 889 #BINDIR   = /usr/bin
 890 # Uncomment the next line to install Vim manuals in "/usr/share/man/man1"
 891 #MANDIR   = /usr/share/man
 892 # Uncomment the next line to install Vim help files in "/usr/share/vim"
 893 #DATADIR  = /usr/share
 894
 895 ### DESTDIR     root of the installation tree.  This is prepended to the other
 896 #               directories.  This directory must exist.
 897 #DESTDIR  = ~/pkg/vim
 898
 899 ### Directory of the man pages
 900 MAN1DIR = /man1
 901
 902 ### Vim version (adjusted by a script)
 903 VIMMAJOR = 7
 904 VIMMINOR = 2
 905
 906 ### Location of Vim files (should not need to be changed, and  {{{1
 907 ### some things might not work when they are changed!)
 908 VIMDIR = /vim
 909 VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR)
 910 HELPSUBDIR = /doc
 911 COLSUBDIR = /colors
 912 SYNSUBDIR = /syntax
 913 INDSUBDIR = /indent
 914 AUTOSUBDIR = /autoload
 915 PLUGSUBDIR = /plugin
 916 FTPLUGSUBDIR = /ftplugin
 917 LANGSUBDIR = /lang
 918 COMPSUBDIR = /compiler
 919 KMAPSUBDIR = /keymap
 920 MACROSUBDIR = /macros
 921 TOOLSSUBDIR = /tools
 922 TUTORSUBDIR = /tutor
 923 SPELLSUBDIR = /spell
 924 PRINTSUBDIR = /print
 925 PODIR = po
 926
 927 ### VIMLOC      common root of the Vim files (all versions)
 928 ### VIMRTLOC    common root of the runtime Vim files (this version)
 929 ### VIMRCLOC    compiled-in location for global [g]vimrc files (all versions)
 930 ### VIMRUNTIMEDIR  compiled-in location for runtime files (optional)
 931 ### HELPSUBLOC  location for help files
 932 ### COLSUBLOC   location for colorscheme files
 933 ### SYNSUBLOC   location for syntax files
 934 ### INDSUBLOC   location for indent files
 935 ### AUTOSUBLOC  location for standard autoload files
 936 ### PLUGSUBLOC  location for standard plugin files
 937 ### FTPLUGSUBLOC  location for ftplugin files
 938 ### LANGSUBLOC  location for language files
 939 ### COMPSUBLOC  location for compiler files
 940 ### KMAPSUBLOC  location for keymap files
 941 ### MACROSUBLOC location for macro files
 942 ### TOOLSSUBLOC location for tools files
 943 ### TUTORSUBLOC location for tutor files
 944 ### SPELLSUBLOC location for spell files
 945 ### PRINTSUBLOC location for PostScript files (prolog, latin1, ..)
 946 ### SCRIPTLOC   location for script files (menu.vim, bugreport.vim, ..)
 947 ### You can override these if you want to install them somewhere else.
 948 ### Edit feature.h for compile-time settings.
 949 VIMLOC          = $(DATADIR)$(VIMDIR)
 950 VIMRTLOC        = $(DATADIR)$(VIMDIR)$(VIMRTDIR)
 951 VIMRCLOC        = $(VIMLOC)
 952 HELPSUBLOC      = $(VIMRTLOC)$(HELPSUBDIR)
 953 COLSUBLOC       = $(VIMRTLOC)$(COLSUBDIR)
 954 SYNSUBLOC       = $(VIMRTLOC)$(SYNSUBDIR)
 955 INDSUBLOC       = $(VIMRTLOC)$(INDSUBDIR)
 956 AUTOSUBLOC      = $(VIMRTLOC)$(AUTOSUBDIR)
 957 PLUGSUBLOC      = $(VIMRTLOC)$(PLUGSUBDIR)
 958 FTPLUGSUBLOC    = $(VIMRTLOC)$(FTPLUGSUBDIR)
 959 LANGSUBLOC      = $(VIMRTLOC)$(LANGSUBDIR)
 960 COMPSUBLOC      = $(VIMRTLOC)$(COMPSUBDIR)
 961 KMAPSUBLOC      = $(VIMRTLOC)$(KMAPSUBDIR)
 962 MACROSUBLOC     = $(VIMRTLOC)$(MACROSUBDIR)
 963 TOOLSSUBLOC     = $(VIMRTLOC)$(TOOLSSUBDIR)
 964 TUTORSUBLOC     = $(VIMRTLOC)$(TUTORSUBDIR)
 965 SPELLSUBLOC     = $(VIMRTLOC)$(SPELLSUBDIR)
 966 PRINTSUBLOC     = $(VIMRTLOC)$(PRINTSUBDIR)
 967 SCRIPTLOC       = $(VIMRTLOC)
 968
 969 ### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and
 970 ### the runtime directory is not below it.
 971 #VIMRUNTIMEDIR = $(VIMRTLOC)
 972
 973 ### Name of the evim file target.
 974 EVIM_FILE       = $(DESTDIR)$(SCRIPTLOC)/evim.vim
 975 MSWIN_FILE      = $(DESTDIR)$(SCRIPTLOC)/mswin.vim
 976
 977 ### Name of the menu file target.
 978 SYS_MENU_FILE   = $(DESTDIR)$(SCRIPTLOC)/menu.vim
 979 SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim
 980 SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim
 981
 982 ### Name of the bugreport file target.
 983 SYS_BUGR_FILE   = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim
 984
 985 ### Name of the file type detection file target.
 986 SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim
 987
 988 ### Name of the file type detection file target.
 989 SYS_FTOFF_FILE  = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim
 990
 991 ### Name of the file type detection script file target.
 992 SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim
 993
 994 ### Name of the ftplugin-on file target.
 995 SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim
 996
 997 ### Name of the ftplugin-off file target.
 998 SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim
 999
1000 ### Name of the indent-on file target.
1001 SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim
1002
1003 ### Name of the indent-off file target.
1004 SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim
1005
1006 ### Name of the option window script file target.
1007 SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim
1008
1009 # Program to install the program in the target directory.  Could also be "mv".
1010 INSTALL_PROG    = cp
1011
1012 # Program to install the data in the target directory.  Cannot be "mv"!
1013 INSTALL_DATA    = cp
1014 INSTALL_DATA_R  = cp -r
1015
1016 ### Program to run on installed binary
1017 #STRIP = strip
1018
1019 ### Permissions for binaries  {{{1
1020 BINMOD = 755
1021
1022 ### Permissions for man page
1023 MANMOD = 644
1024
1025 ### Permissions for help files
1026 HELPMOD = 644
1027
1028 ### Permissions for Perl and shell scripts
1029 SCRIPTMOD = 755
1030
1031 ### Permission for Vim script files (menu.vim, bugreport.vim, ..)
1032 VIMSCRIPTMOD = 644
1033
1034 ### Permissions for all directories that are created
1035 DIRMOD = 755
1036
1037 ### Permissions for all other files that are created
1038 FILEMOD = 644
1039
1040 # Where to copy the man and help files from
1041 HELPSOURCE = ../runtime/doc
1042
1043 # Where to copy the script files from (menu, bugreport)
1044 SCRIPTSOURCE = ../runtime
1045
1046 # Where to copy the colorscheme files from
1047 COLSOURCE = ../runtime/colors
1048
1049 # Where to copy the syntax files from
1050 SYNSOURCE = ../runtime/syntax
1051
1052 # Where to copy the indent files from
1053 INDSOURCE = ../runtime/indent
1054
1055 # Where to copy the standard plugin files from
1056 AUTOSOURCE = ../runtime/autoload
1057
1058 # Where to copy the standard plugin files from
1059 PLUGSOURCE = ../runtime/plugin
1060
1061 # Where to copy the ftplugin files from
1062 FTPLUGSOURCE = ../runtime/ftplugin
1063
1064 # Where to copy the macro files from
1065 MACROSOURCE = ../runtime/macros
1066
1067 # Where to copy the tools files from
1068 TOOLSSOURCE = ../runtime/tools
1069
1070 # Where to copy the tutor files from
1071 TUTORSOURCE = ../runtime/tutor
1072
1073 # Where to copy the spell files from
1074 SPELLSOURCE = ../runtime/spell
1075
1076 # Where to look for language specific files
1077 LANGSOURCE = ../runtime/lang
1078
1079 # Where to look for compiler files
1080 COMPSOURCE = ../runtime/compiler
1081
1082 # Where to look for keymap files
1083 KMAPSOURCE = ../runtime/keymap
1084
1085 # Where to look for print resource files
1086 PRINTSOURCE = ../runtime/print
1087
1088 # If you are using Linux, you might want to use this to make vim the
1089 # default vi editor, it will create a link from vi to Vim when doing
1090 # "make install".  An existing file will be overwritten!
1091 # When not using it, some make programs can't handle an undefined $(LINKIT).
1092 #LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi
1093 LINKIT = @echo >/dev/null
1094
1095 ###
1096 ### GRAPHICAL USER INTERFACE (GUI).  {{{1
1097 ### 'configure --enable-gui' can enable one of these for you if you did set
1098 ### a corresponding CONF_OPT_GUI above and have X11.
1099 ### Override configures choice by uncommenting all the following lines.
1100 ### As they are, the GUI is disabled.  Replace "NONE" with "ATHENA" or "MOTIF"
1101 ### for enabling the Athena or Motif GUI.
1102 #GUI_SRC        = $(NONE_SRC)
1103 #GUI_OBJ        = $(NONE_OBJ)
1104 #GUI_DEFS       = $(NONE_DEFS)
1105 #GUI_IPATH      = $(NONE_IPATH)
1106 #GUI_LIBS_DIR   = $(NONE_LIBS_DIR)
1107 #GUI_LIBS1      = $(NONE_LIBS1)
1108 #GUI_LIBS2      = $(NONE_LIBS2)
1109 #GUI_INSTALL    = $(NONE_INSTALL)
1110 #GUI_TARGETS    = $(NONE_TARGETS)
1111 #GUI_MAN_TARGETS= $(NONE_MAN_TARGETS)
1112 #GUI_TESTTARGET = $(NONE_TESTTARGET)
1113 #GUI_BUNDLE     = $(NONE_BUNDLE)
1114
1115 # Without a GUI install the normal way.
1116 NONE_INSTALL = install_normal
1117
1118 ### GTK GUI
1119 GTK_SRC         = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \
1120                         gui_beval.c
1121 GTK_OBJ         = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \
1122                         objects/pty.o objects/gui_gtk_f.o \
1123                         objects/gui_beval.o
1124 GTK_DEFS        = -DFEAT_GUI_GTK $(NARROW_PROTO)
1125 GTK_IPATH       = $(GUI_INC_LOC)
1126 GTK_LIBS_DIR    = $(GUI_LIB_LOC)
1127 GTK_LIBS1       =
1128 GTK_LIBS2       = $(GTK_LIBNAME)
1129 GTK_INSTALL     = install_normal install_gui_extra
1130 GTK_TARGETS     = installglinks
1131 GTK_MAN_TARGETS = yes
1132 GTK_TESTTARGET  = gui
1133 GTK_BUNDLE      =
1134
1135 ### Motif GUI
1136 MOTIF_SRC       = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \
1137                         gui_xmdlg.c gui_xmebw.c
1138 MOTIF_OBJ       = objects/gui.o objects/gui_motif.o objects/gui_x11.o \
1139                         objects/pty.o objects/gui_beval.o \
1140                         objects/gui_xmdlg.o objects/gui_xmebw.o
1141 MOTIF_DEFS      = -DFEAT_GUI_MOTIF $(NARROW_PROTO)
1142 MOTIF_IPATH     = $(GUI_INC_LOC)
1143 MOTIF_LIBS_DIR  = $(GUI_LIB_LOC)
1144 MOTIF_LIBS1     =
1145 MOTIF_LIBS2     = $(MOTIF_LIBNAME) -lXt
1146 MOTIF_INSTALL   = install_normal install_gui_extra
1147 MOTIF_TARGETS   = installglinks
1148 MOTIF_MAN_TARGETS = yes
1149 MOTIF_TESTTARGET = gui
1150 MOTIF_BUNDLE    =
1151
1152 ### Athena GUI
1153 ### Use Xaw3d to make the menus look a little bit nicer
1154 #XAW_LIB = -lXaw3d
1155 XAW_LIB = -lXaw
1156
1157 ### When using Xaw3d, uncomment/comment the following lines to also get the
1158 ### scrollbars from Xaw3d.
1159 #ATHENA_SRC     = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1160 #ATHENA_OBJ     = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1161 #                       objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1162 #ATHENA_DEFS    = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \
1163 #                   -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \
1164 #                   -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb
1165 ATHENA_SRC      = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \
1166                         gui_at_sb.c gui_at_fs.c
1167 ATHENA_OBJ      = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1168                         objects/pty.o objects/gui_beval.o \
1169                         objects/gui_at_sb.o objects/gui_at_fs.o
1170 ATHENA_DEFS     = -DFEAT_GUI_ATHENA $(NARROW_PROTO)
1171
1172 ATHENA_IPATH    = $(GUI_INC_LOC)
1173 ATHENA_LIBS_DIR = $(GUI_LIB_LOC)
1174 ATHENA_LIBS1    = $(XAW_LIB)
1175 ATHENA_LIBS2    = -lXt
1176 ATHENA_INSTALL  = install_normal install_gui_extra
1177 ATHENA_TARGETS  = installglinks
1178 ATHENA_MAN_TARGETS = yes
1179 ATHENA_TESTTARGET = gui
1180 ATHENA_BUNDLE   =
1181
1182 ### neXtaw GUI
1183 NEXTAW_LIB = -lneXtaw
1184
1185 NEXTAW_SRC      = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1186 NEXTAW_OBJ      = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1187                         objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1188 NEXTAW_DEFS     = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO)
1189
1190 NEXTAW_IPATH    = $(GUI_INC_LOC)
1191 NEXTAW_LIBS_DIR = $(GUI_LIB_LOC)
1192 NEXTAW_LIBS1    = $(NEXTAW_LIB)
1193 NEXTAW_LIBS2    = -lXt
1194 NEXTAW_INSTALL  =  install_normal install_gui_extra
1195 NEXTAW_TARGETS  =  installglinks
1196 NEXTAW_MAN_TARGETS = yes
1197 NEXTAW_TESTTARGET = gui
1198 NEXTAW_BUNDLE   =
1199
1200 ### (J)  Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld
1201 #        errors:  ld: Undefined symbol
1202 #                     _get_wmShellWidgetClass
1203 #                     _get_applicationShellWidgetClass
1204 # then you need to get patches 100512-02 and 100573-03 from Sun.  In the
1205 # meantime, uncomment the following GUI_X_LIBS definition as a workaround:
1206 #GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext
1207 # If you also get cos, sin etc. as undefined symbols, try uncommenting this
1208 # too:
1209 #EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm
1210
1211 # PHOTON GUI
1212 PHOTONGUI_SRC   = gui.c gui_photon.c pty.c
1213 PHOTONGUI_OBJ   = objects/gui.o objects/gui_photon.o objects/pty.o
1214 PHOTONGUI_DEFS  = -DFEAT_GUI_PHOTON
1215 PHOTONGUI_IPATH =
1216 PHOTONGUI_LIBS_DIR =
1217 PHOTONGUI_LIBS1 = -lph -lphexlib
1218 PHOTONGUI_LIBS2 =
1219 PHOTONGUI_INSTALL = install_normal install_gui_extra
1220 PHOTONGUI_TARGETS = installglinks
1221 PHOTONGUI_MAN_TARGETS = yes
1222 PHOTONGUI_TESTTARGET = gui
1223 PHOTONGUI_BUNDLE =
1224
1225 # CARBON GUI
1226 CARBONGUI_SRC   = gui.c gui_mac.c
1227 CARBONGUI_OBJ   = objects/gui.o objects/gui_mac.o objects/pty.o
1228 CARBONGUI_DEFS  = -DFEAT_GUI_MAC -fno-common -fpascal-strings \
1229                   -Wall -Wno-unknown-pragmas \
1230                   -mdynamic-no-pic -pipe
1231 CARBONGUI_IPATH = -I. -Iproto
1232 CARBONGUI_LIBS_DIR =
1233 CARBONGUI_LIBS1 = -framework Carbon
1234 CARBONGUI_LIBS2 =
1235 CARBONGUI_INSTALL = install_macosx
1236 CARBONGUI_TARGETS =
1237 CARBONGUI_MAN_TARGETS =
1238 CARBONGUI_TESTTARGET = gui
1239 CARBONGUI_BUNDLE = gui_bundle
1240 APPDIR = $(VIMNAME).app
1241 CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET)
1242
1243 # MACVIM GUI
1244 MACVIMGUI_SRC   = gui.c MacVim/gui_macvim.m MacVim/MMBackend.m \
1245                   MacVim/MacVim.m
1246 MACVIMGUI_OBJ   = objects/gui.o objects/pty.o objects/gui_macvim.o \
1247                   objects/MMBackend.o objects/MacVim.o
1248 MACVIMGUI_DEFS  = -DFEAT_GUI_MACVIM -Wall -Wno-unknown-pragmas -pipe
1249 MACVIMGUI_IPATH = -I. -Iproto
1250 MACVIMGUI_LIBS_DIR =
1251 MACVIMGUI_LIBS1 = -framework Cocoa -framework Carbon
1252 MACVIMGUI_LIBS2 =
1253 MACVIMGUI_INSTALL = install_normal
1254 MACVIMGUI_TARGETS =
1255 MACVIMGUI_MAN_TARGETS =
1256 MACVIMGUI_TESTTARGET = gui
1257 MACVIMGUI_BUNDLE =
1258
1259 # All GUI files
1260 ALL_GUI_SRC  = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c
1261 ALL_GUI_PRO  = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro
1262
1263 # }}}
1264
1265 ### Command to create dependencies based on #include "..."
1266 ### prototype headers are ignored due to -DPROTO, system
1267 ### headers #include <...> are ignored if we use the -MM option, as
1268 ### e.g. provided by gcc-cpp.
1269 ### Include FEAT_GUI to get gependency on gui.h
1270 ### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x.
1271 CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \
1272                 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)`
1273
1274 # flags for cproto
1275 #     This is for cproto 3 patchlevel 8 or below
1276 #     __inline, __attribute__ and __extension__ are not recognized by cproto
1277 #     G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h.
1278 NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \
1279           -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \
1280           -D__extension__= -D__restrict="" \
1281           -D__gnuc_va_list=char -D__builtin_va_list=char
1282
1283 #
1284 #     This is for cproto 3 patchlevel 9 or above (currently 4.6)
1285 #     __inline and __attribute__ are now recognized by cproto
1286 #     -D"foo()=" is not supported by all compilers so do not use it
1287 # NO_ATTR=
1288 #
1289 #     maybe the "/usr/bin/cc -E" has to be adjusted for some systems
1290 # This is for cproto 3.5 patchlevel 3:
1291 # PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1292 #
1293 # Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
1294 # PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1295 #
1296 # Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
1297 PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR)
1298
1299
1300 ################################################
1301 ##   no changes required below this line      ##
1302 ################################################
1303
1304 SHELL = /bin/sh
1305
1306 .SUFFIXES:
1307 .SUFFIXES: .c .o .pro
1308
1309 PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS)
1310 POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS)
1311
1312 ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS)
1313
1314 # Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together
1315 # with "-E".
1316 OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS)
1317
1318 LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca
1319
1320 LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
1321
1322 DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS)
1323
1324 # If you have problems with flags that cproto doesn't support, and you are
1325 # using GNU make, you can try using the other line to filter out arguments.
1326 #PFLAGS = $(PROTO_FLAGS) -DPROTO $(filter -D% -I%, $(LINT_CFLAGS))
1327 PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS)
1328
1329 ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR)
1330 ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS)
1331
1332 # abbreviations
1333 DEST_BIN = $(DESTDIR)$(BINDIR)
1334 DEST_VIM = $(DESTDIR)$(VIMLOC)
1335 DEST_RT = $(DESTDIR)$(VIMRTLOC)
1336 DEST_HELP = $(DESTDIR)$(HELPSUBLOC)
1337 DEST_COL = $(DESTDIR)$(COLSUBLOC)
1338 DEST_SYN = $(DESTDIR)$(SYNSUBLOC)
1339 DEST_IND = $(DESTDIR)$(INDSUBLOC)
1340 DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC)
1341 DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC)
1342 DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC)
1343 DEST_LANG = $(DESTDIR)$(LANGSUBLOC)
1344 DEST_COMP = $(DESTDIR)$(COMPSUBLOC)
1345 DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC)
1346 DEST_MACRO = $(DESTDIR)$(MACROSUBLOC)
1347 DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC)
1348 DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC)
1349 DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC)
1350 DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC)
1351 DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC)
1352 DEST_MAN_TOP = $(DESTDIR)$(MANDIR)
1353
1354 # We assume that the ".../man/xx/man1/" directory is for latin1 manual pages.
1355 # Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/"
1356 # directory first.
1357 # FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too.
1358 DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR)
1359 DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR)
1360 DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR)
1361 DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR)
1362 DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR)
1363 DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR)
1364 DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR)
1365 DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR)
1366 DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR)
1367 DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR)
1368 DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR)
1369 DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR)
1370
1371 #            BASIC_SRC: files that are always used
1372 #              GUI_SRC: extra GUI files for current configuration
1373 #          ALL_GUI_SRC: all GUI files for Unix
1374 #
1375 #                  SRC: files used for current configuration
1376 #             TAGS_SRC: source files used for make tags
1377 #            TAGS_INCL: include files used for make tags
1378 #              ALL_SRC: source files used for make depend and make lint
1379
1380 TAGS_INCL = *.h
1381
1382 BASIC_SRC = \
1383         buffer.c \
1384         charset.c \
1385         diff.c \
1386         digraph.c \
1387         edit.c \
1388         eval.c \
1389         ex_cmds.c \
1390         ex_cmds2.c \
1391         ex_docmd.c \
1392         ex_eval.c \
1393         ex_getln.c \
1394         fileio.c \
1395         fold.c \
1396         getchar.c \
1397         hardcopy.c \
1398         hashtab.c \
1399         if_cscope.c \
1400         if_xcmdsrv.c \
1401         main.c \
1402         mark.c \
1403         memfile.c \
1404         memline.c \
1405         menu.c \
1406         message.c \
1407         misc1.c \
1408         misc2.c \
1409         move.c \
1410         mbyte.c \
1411         normal.c \
1412         ops.c \
1413         option.c \
1414         os_unix.c \
1415         auto/pathdef.c \
1416         popupmnu.c \
1417         quickfix.c \
1418         regexp.c \
1419         screen.c \
1420         search.c \
1421         spell.c \
1422         syntax.c \
1423         tag.c \
1424         term.c \
1425         ui.c \
1426         undo.c \
1427         version.c \
1428         window.c \
1429         $(OS_EXTRA_SRC)
1430
1431 SRC =   $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \
1432         $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \
1433         $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC)
1434
1435 TAGS_SRC = *.c *.cpp if_perl.xs
1436
1437 EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \
1438             if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \
1439             workshop.c wsdebug.c integration.c netbeans.c
1440
1441 # All sources, also the ones that are not configured
1442 ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC)
1443
1444 # Which files to check with lint.  Select one of these three lines.  ALL_SRC
1445 # checks more, but may not work well for checking a GUI that wasn't configured.
1446 # The perl sources also don't work well with lint.
1447 LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \
1448         $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC)
1449 #LINT_SRC = $(SRC)
1450 #LINT_SRC = $(ALL_SRC)
1451
1452 OBJ = \
1453         objects/buffer.o \
1454         objects/charset.o \
1455         objects/diff.o \
1456         objects/digraph.o \
1457         objects/edit.o \
1458         objects/eval.o \
1459         objects/ex_cmds.o \
1460         objects/ex_cmds2.o \
1461         objects/ex_docmd.o \
1462         objects/ex_eval.o \
1463         objects/ex_getln.o \
1464         objects/fileio.o \
1465         objects/fold.o \
1466         objects/getchar.o \
1467         objects/hardcopy.o \
1468         objects/hashtab.o \
1469         $(HANGULIN_OBJ) \
1470         objects/if_cscope.o \
1471         objects/if_xcmdsrv.o \
1472         objects/main.o \
1473         objects/mark.o \
1474         objects/memfile.o \
1475         objects/memline.o \
1476         objects/menu.o \
1477         objects/message.o \
1478         objects/misc1.o \
1479         objects/misc2.o \
1480         objects/move.o \
1481         objects/mbyte.o \
1482         objects/normal.o \
1483         objects/ops.o \
1484         objects/option.o \
1485         objects/os_unix.o \
1486         objects/pathdef.o \
1487         objects/popupmnu.o \
1488         objects/quickfix.o \
1489         objects/regexp.o \
1490         objects/screen.o \
1491         objects/search.o \
1492         objects/spell.o \
1493         objects/syntax.o \
1494         $(SNIFF_OBJ) \
1495         objects/tag.o \
1496         objects/term.o \
1497         objects/ui.o \
1498         objects/undo.o \
1499         objects/window.o \
1500         $(GUI_OBJ) \
1501         $(MZSCHEME_OBJ) \
1502         $(PERL_OBJ) \
1503         $(PYTHON_OBJ) \
1504         $(TCL_OBJ) \
1505         $(RUBY_OBJ) \
1506         $(OS_EXTRA_OBJ) \
1507         $(WORKSHOP_OBJ) \
1508         $(NETBEANS_OBJ) \
1509         $(WSDEBUG_OBJ)
1510
1511 PRO_AUTO = \
1512         buffer.pro \
1513         charset.pro \
1514         diff.pro \
1515         digraph.pro \
1516         edit.pro \
1517         eval.pro \
1518         ex_cmds.pro \
1519         ex_cmds2.pro \
1520         ex_docmd.pro \
1521         ex_eval.pro \
1522         ex_getln.pro \
1523         fileio.pro \
1524         fold.pro \
1525         getchar.pro \
1526         hardcopy.pro \
1527         hashtab.pro \
1528         hangulin.pro \
1529         if_cscope.pro \
1530         if_xcmdsrv.pro \
1531         if_python.pro \
1532         if_ruby.pro \
1533         main.pro \
1534         mark.pro \
1535         memfile.pro \
1536         memline.pro \
1537         menu.pro \
1538         message.pro \
1539         misc1.pro \
1540         misc2.pro \
1541         move.pro \
1542         mbyte.pro \
1543         normal.pro \
1544         ops.pro \
1545         option.pro \
1546         os_unix.pro \
1547         popupmnu.pro \
1548         quickfix.pro \
1549         regexp.pro \
1550         screen.pro \
1551         search.pro \
1552         spell.pro \
1553         syntax.pro \
1554         tag.pro \
1555         term.pro \
1556         termlib.pro \
1557         ui.pro \
1558         undo.pro \
1559         version.pro \
1560         window.pro \
1561         gui_beval.pro \
1562         workshop.pro \
1563         netbeans.pro \
1564         $(ALL_GUI_PRO) \
1565         $(TCL_PRO)
1566
1567 # Resources used for the Mac are in one directory.
1568 RSRC_DIR = os_mac_rsrc
1569
1570 PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
1571         os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO)
1572
1573 # Default target is making the executable and tools
1574 all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
1575
1576 tools: $(TOOLS)
1577
1578 # Run configure with all the setting from above.
1579 #
1580 # Note: auto/config.h doesn't depend on configure, because running configure
1581 # doesn't always update auto/config.h.  The timestamp isn't changed if the
1582 # file contents didn't change (to avoid recompiling everything).  Including a
1583 # dependency on auto/config.h would cause running configure each time when
1584 # auto/config.h isn't updated.  The dependency on auto/config.mk should make
1585 # sure configure is run when it's needed.
1586 #
1587 config auto/config.mk: auto/configure config.mk.in config.h.in
1588         GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \
1589                 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
1590                 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
1591                 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
1592                 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \
1593                 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
1594                 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
1595                 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
1596                 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \
1597                 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL)  $(CONF_OPT_NETBEANS) \
1598                 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \
1599                 $(CONF_OPT_SYSMOUSE)
1600
1601 # Use "make reconfig" to rerun configure without cached values.
1602 # When config.h changes, most things will be recompiled automatically.
1603 # Invoke $(MAKE) to run config with the empty auto/config.mk.
1604 # Invoke $(MAKE) to build all with the filled auto/config.mk.
1605 reconfig: scratch clean
1606         $(MAKE) -f Makefile config
1607         $(MAKE) -f Makefile all
1608
1609 # Run autoconf to produce auto/configure.
1610 # Note:
1611 # - DO NOT RUN autoconf MANUALLY!  It will overwrite ./configure instead of
1612 #   producing auto/configure.
1613 # - autoconf is not run automatically, because a patch usually changes both
1614 #   configure.in and auto/configure but can't update the timestamps.  People
1615 #   who do not have (the correct version of) autoconf would run into trouble.
1616 #
1617 # Two tricks are required to make autoconf put its output in the "auto" dir:
1618 # - Temporarily move the ./configure script to ./configure.save.  Don't
1619 #   overwrite it, it's probably the result of an aborted autoconf.
1620 # - Use sed to change ./config.log to auto/config.log in the configure script.
1621 # Autoconf 2.5x (2.59 at least) produces a few more files that we need to take
1622 # care of:
1623 # - configure.lineno: has the line numbers replaced with $LINENO.  That
1624 #   improves patches a LOT, thus use it instead (until someone says it doesn't
1625 #   work on some system).
1626 # - autom4te.cache directory is created and not cleaned up.  Delete it.
1627 # - Uses ">config.log" instead of "./config.log".
1628 autoconf:
1629         if test ! -f configure.save; then mv configure configure.save; fi
1630         autoconf
1631         sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure
1632         chmod 755 auto/configure
1633         mv -f configure.save configure
1634         -rm -rf autom4te.cache
1635         -rm -f auto/config.status auto/config.cache
1636
1637 # Re-execute this Makefile to include the new auto/config.mk produced by
1638 # configure Only used when typing "make" with a fresh auto/config.mk.
1639 myself:
1640         $(MAKE) -f Makefile all
1641
1642
1643 # The normal command to compile a .c file to its .o file.
1644 CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS)
1645
1646
1647 # Link the target for normal use or debugging.
1648 # A shell script is used to try linking without unneccesary libraries.
1649 $(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h
1650         $(CCC) version.c -o objects/version.o
1651         @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \
1652                 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \
1653                 MAKE="$(MAKE)" sh $(srcdir)/link.sh
1654
1655 xxd/xxd$(EXEEXT): xxd/xxd.c
1656         cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \
1657                 $(MAKE) -f Makefile
1658
1659 # Build the language specific files if they were unpacked.
1660 # Generate the converted .mo files separately, it's no problem if this fails.
1661 languages:
1662         @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1663                 cd $(PODIR); \
1664                 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \
1665         fi
1666         -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1667                 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \
1668         fi
1669
1670 # Update the *.po files for changes in the sources.  Only run manually.
1671 update-po:
1672         cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po
1673
1674 # Generate function prototypes.  This is not needed to compile vim, but if
1675 # you want to use it, cproto is out there on the net somewhere -- Webb
1676 #
1677 # When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a
1678 # few include files that can not be found, that's OK.
1679
1680 proto: $(PRO_AUTO) $(PRO_MANUAL)
1681
1682 ### Would be nice if this would work for "normal" make.
1683 ### Currently it only works for (Free)BSD make.
1684 #$(PRO_AUTO): $$(*F).c
1685 #       cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@
1686
1687 # Always define FEAT_GUI.  This may generate a few warnings if it's also
1688 # defined in auto/config.h, you can ignore that.
1689 .c.pro:
1690         cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@
1691         echo "/* vim: set ft=c : */" >> proto/$@
1692
1693 os_amiga.pro: os_amiga.c
1694         cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@
1695         echo "/* vim: set ft=c : */" >> proto/$@
1696
1697 os_msdos.pro: os_msdos.c
1698         cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@
1699         echo "/* vim: set ft=c : */" >> proto/$@
1700
1701 os_win16.pro: os_win16.c
1702         cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@
1703         echo "/* vim: set ft=c : */" >> proto/$@
1704
1705 os_win32.pro: os_win32.c
1706         cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1707         echo "/* vim: set ft=c : */" >> proto/$@
1708
1709 os_mswin.pro: os_mswin.c
1710         cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1711         echo "/* vim: set ft=c : */" >> proto/$@
1712
1713 os_beos.pro: os_beos.c
1714         cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@
1715         echo "/* vim: set ft=c : */" >> proto/$@
1716
1717 os_vms.pro: os_vms.c
1718 # must use os_vms_conf.h for auto/config.h
1719         mv auto/config.h auto/config.h.save
1720         cp os_vms_conf.h auto/config.h
1721         cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@
1722         echo "/* vim: set ft=c : */" >> proto/$@
1723         rm auto/config.h
1724         mv auto/config.h.save auto/config.h
1725
1726 # if_perl.pro is special: Use the generated if_perl.c for input and remove
1727 # prototypes for local functions.
1728 if_perl.pro: auto/if_perl.c
1729         cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@
1730
1731
1732 notags:
1733         -rm -f tags
1734
1735 # Note: tags is made for the currently configured version, can't include both
1736 #       Motif and Athena GUI
1737 # You can ignore error messages for missing files.
1738 tags TAGS: notags
1739         $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL)
1740
1741 # Make a highlight file for types.  Requires Exuberant ctags and awk
1742 types: types.vim
1743 types.vim: $(TAGS_SRC) $(TAGS_INCL)
1744         ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\
1745                 awk 'BEGIN{printf("syntax keyword Type\t")}\
1746                         {printf("%s ", $$1)}END{print ""}' > $@
1747
1748 # Execute the test scripts.  Run these after compiling Vim, before installing.
1749 # This doesn't depend on $(VIMTARGET), because that won't work when configure
1750 # wasn't run yet.  Restart make to build it instead.
1751 #
1752 # This will produce a lot of garbage on your screen, including a few error
1753 # messages.  Don't worry about that.
1754 # If there is a real error, there will be a difference between "test.out" and
1755 # a "test99.ok" file.
1756 # If everything is alright, the final message will be "ALL DONE".
1757 #
1758 test check:
1759         $(MAKE) -f Makefile $(VIMTARGET)
1760         -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1761                 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \
1762         fi
1763         -if test $(VIMTARGET) != vim -a ! -r vim; then \
1764                 ln -s $(VIMTARGET) vim; \
1765         fi
1766         cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG)
1767
1768 testclean:
1769         cd testdir; $(MAKE) -f Makefile clean
1770         if test -d $(PODIR); then \
1771                 cd $(PODIR); $(MAKE) checkclean; \
1772         fi
1773
1774 install: $(GUI_INSTALL)
1775
1776 install_normal: installvim installtools $(INSTALL_LANGS) install-icons
1777
1778 install_gui_extra: installgtutorbin
1779
1780 installvim: installvimbin installtutorbin \
1781                 installruntime installlinks installmanlinks
1782
1783 #
1784 # Avoid overwriting an existing executable, somebody might be running it and
1785 # overwriting it could cause it to crash.  Deleting it is OK, it won't be
1786 # really deleted until all running processes for it have exited.  It is
1787 # renamed first, in case the deleting doesn't work.
1788 #
1789 # If you want to keep an older version, rename it before running "make
1790 # install".
1791 #
1792 installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN)
1793         -if test -f $(DEST_BIN)/$(VIMTARGET); then \
1794           mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \
1795           rm -f $(DEST_BIN)/$(VIMNAME).rm; \
1796         fi
1797         $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN)
1798         $(STRIP) $(DEST_BIN)/$(VIMTARGET)
1799         chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET)
1800 # may create a link to the new executable from /usr/bin/vi
1801         -$(LINKIT)
1802
1803 # Long list of arguments for the shell script that installs the manual pages
1804 # for one language.
1805 INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \
1806                 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME)
1807
1808 # Install most of the runtime files
1809 installruntime: installrtbase installmacros installtutor installspell
1810
1811 # install the help files; first adjust the contents for the final location
1812 installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \
1813                 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \
1814                 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \
1815                 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP)
1816         -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS)
1817         @echo generating help tags
1818 # Generate the help tags with ":helptags" to handle all languages.
1819         -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags
1820         cd $(HELPSOURCE); \
1821                 files=`ls *.txt tags`; \
1822                 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \
1823                 $(INSTALL_DATA) $$files  $(DEST_HELP); \
1824                 cd $(DEST_HELP); \
1825                 chmod $(HELPMOD) $$files
1826         $(INSTALL_DATA)  $(HELPSOURCE)/*.pl $(DEST_HELP)
1827         chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl
1828 # install the menu files
1829         $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE)
1830         chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE)
1831         $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE)
1832         chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE)
1833         $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE)
1834         chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE)
1835 # install the evim file
1836         $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE)
1837         chmod $(VIMSCRIPTMOD) $(MSWIN_FILE)
1838         $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE)
1839         chmod $(VIMSCRIPTMOD) $(EVIM_FILE)
1840 # install the bugreport file
1841         $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE)
1842         chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE)
1843 # install the example vimrc files
1844         $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT)
1845         chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim
1846         $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT)
1847         chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim
1848 # install the file type detection files
1849         $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE)
1850         chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE)
1851         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE)
1852         chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE)
1853         $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE)
1854         chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE)
1855         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE)
1856         chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE)
1857         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE)
1858         chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE)
1859         $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE)
1860         chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE)
1861         $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE)
1862         chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE)
1863         $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE)
1864         chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE)
1865 # install the print resource files
1866         cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT)
1867         cd $(DEST_PRINT); chmod $(FILEMOD) *.ps
1868 # install the colorscheme files
1869         cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL)
1870         cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt
1871 # install the syntax files
1872         cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN)
1873         cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt
1874 # install the indent files
1875         cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND)
1876         cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt
1877 # install the standard autoload files
1878         cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO)
1879         cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt
1880         cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml
1881         cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim
1882 # install the standard plugin files
1883         cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG)
1884         cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt
1885 # install the ftplugin files
1886         cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP)
1887         cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt
1888 # install the compiler files
1889         cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP)
1890         cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt
1891
1892 installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
1893         $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO)
1894         chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print`
1895         chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print`
1896         chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh
1897 # When using CVS some CVS directories might have been copied.
1898         cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \
1899               if test -n "$$cvs"; then \
1900                  rm -rf $$cvs; \
1901               fi
1902
1903 # install the tutor files
1904 installtutorbin: $(DEST_VIM)
1905         $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor
1906         chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor
1907
1908 installgtutorbin: $(DEST_VIM)
1909         $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor
1910         chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor
1911
1912 installtutor: $(DEST_RT) $(DEST_TUTOR)
1913         -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR)
1914         chmod $(HELPMOD) $(DEST_TUTOR)/*
1915
1916 # Install the spell files, if they exist.  This assumes at least the English
1917 # spell file is there.
1918 installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
1919         if test -f $(SPELLSOURCE)/en.latin1.spl; then \
1920           $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \
1921           chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \
1922         fi
1923
1924 # install helper program xxd
1925 installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
1926                 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \
1927                 $(INSTALL_TOOL_LANGS)
1928         if test -f $(DEST_BIN)/xxd$(EXEEXT); then \
1929           mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \
1930           rm -f $(DEST_BIN)/xxd.rm; \
1931         fi
1932         $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN)
1933         $(STRIP) $(DEST_BIN)/xxd$(EXEEXT)
1934         chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT)
1935         -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS)
1936
1937 # install the runtime tools
1938         $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS)
1939 # When using CVS some CVS directories might have been copied.
1940         cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \
1941               if test -n "$$cvs"; then \
1942                  rm -rf $$cvs; \
1943               fi
1944         -chmod $(FILEMOD) $(DEST_TOOLS)/*
1945 # replace the path in some tools
1946         perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl
1947         awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1948                 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1949                 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi
1950         -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*`
1951
1952 # install the language specific files for tools, if they were unpacked
1953 install-tool-languages:
1954         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1955         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1956         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1957         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1958         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1959         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
1960         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
1961         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
1962         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
1963         -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1964         -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1965
1966 # install the language specific files, if they were unpacked
1967 install-languages: languages $(DEST_LANG) $(DEST_KMAP)
1968         -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1969         -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1970         -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1971         -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1972         -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1973         -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
1974         -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
1975         -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
1976         -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
1977         -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1978         -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1979         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1980                 $(DEST_MAN_FR) $(INSTALLMLARGS)
1981         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1982                 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
1983         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1984                 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
1985         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1986                 $(DEST_MAN_IT) $(INSTALLMLARGS)
1987         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1988                 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
1989         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1990                 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
1991         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1992                 $(DEST_MAN_PL) $(INSTALLMLARGS)
1993         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1994                 $(DEST_MAN_PL_I) $(INSTALLMLARGS)
1995         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1996                 $(DEST_MAN_PL_U) $(INSTALLMLARGS)
1997         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1998                 $(DEST_MAN_RU) $(INSTALLMLARGS)
1999         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2000                 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
2001         if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
2002            cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \
2003            INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \
2004         fi
2005         if test -d $(LANGSOURCE); then \
2006            $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \
2007            chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \
2008         fi
2009         if test -d $(KMAPSOURCE); then \
2010            $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \
2011            chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \
2012         fi
2013
2014 # install the icons for KDE, if the directory exists and the icon doesn't.
2015 ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps
2016 ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps
2017 ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps
2018 KDEPATH = $(HOME)/.kde/share/icons
2019 install-icons:
2020         if test -d $(ICON48PATH) -a -w $(ICON48PATH) \
2021                 -a ! -f $(ICON48PATH)/gvim.png; then \
2022            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \
2023         fi
2024         if test -d $(ICON32PATH) -a -w $(ICON32PATH) \
2025                 -a ! -f $(ICON32PATH)/gvim.png; then \
2026            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \
2027         fi
2028         if test -d $(ICON16PATH) -a -w $(ICON16PATH) \
2029                 -a ! -f $(ICON16PATH)/gvim.png; then \
2030            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \
2031         fi
2032
2033
2034 $(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE):
2035         @echo Runtime files not found.
2036         @echo You need to unpack the runtime archive before running "make install".
2037         test -f error
2038
2039 $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
2040                 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \
2041                 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \
2042                 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \
2043                 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \
2044                 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG):
2045         -$(SHELL) ./mkinstalldirs $@
2046         -chmod $(DIRMOD) $@
2047
2048 # create links from various names to vim.  This is only done when the links
2049 # (or executables with the same name) don't exist yet.
2050 installlinks: $(GUI_TARGETS) \
2051                         $(DEST_BIN)/$(EXTARGET) \
2052                         $(DEST_BIN)/$(VIEWTARGET) \
2053                         $(DEST_BIN)/$(RVIMTARGET) \
2054                         $(DEST_BIN)/$(RVIEWTARGET) \
2055                         $(INSTALLVIMDIFF)
2056
2057 installglinks: $(DEST_BIN)/$(GVIMTARGET) \
2058                         $(DEST_BIN)/$(GVIEWTARGET) \
2059                         $(DEST_BIN)/$(RGVIMTARGET) \
2060                         $(DEST_BIN)/$(RGVIEWTARGET) \
2061                         $(DEST_BIN)/$(EVIMTARGET) \
2062                         $(DEST_BIN)/$(EVIEWTARGET) \
2063                         $(INSTALLGVIMDIFF)
2064
2065 installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET)
2066 installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET)
2067
2068 $(DEST_BIN)/$(EXTARGET):
2069         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET)
2070
2071 $(DEST_BIN)/$(VIEWTARGET):
2072         cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET)
2073
2074 $(DEST_BIN)/$(GVIMTARGET):
2075         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET)
2076
2077 $(DEST_BIN)/$(GVIEWTARGET):
2078         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET)
2079
2080 $(DEST_BIN)/$(RVIMTARGET):
2081         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET)
2082
2083 $(DEST_BIN)/$(RVIEWTARGET):
2084         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET)
2085
2086 $(DEST_BIN)/$(RGVIMTARGET):
2087         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET)
2088
2089 $(DEST_BIN)/$(RGVIEWTARGET):
2090         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET)
2091
2092 $(DEST_BIN)/$(VIMDIFFTARGET):
2093         cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET)
2094
2095 $(DEST_BIN)/$(GVIMDIFFTARGET):
2096         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET)
2097
2098 $(DEST_BIN)/$(EVIMTARGET):
2099         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET)
2100
2101 $(DEST_BIN)/$(EVIEWTARGET):
2102         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET)
2103
2104 # Create links for the manual pages with various names to vim.  This is only
2105 # done when the links (or manpages with the same name) don't exist yet.
2106
2107 INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \
2108                 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \
2109                 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \
2110                 $(GVIMDIFFNAME) $(EVIEWNAME)
2111
2112 installmanlinks:
2113         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2114                 $(DEST_MAN) $(INSTALLMLARGS)
2115
2116 uninstall: uninstall_runtime
2117         -rm -f $(DEST_BIN)/$(VIMTARGET)
2118         -rm -f $(DEST_BIN)/vimtutor
2119         -rm -f $(DEST_BIN)/gvimtutor
2120         -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET)
2121         -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET)
2122         -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET)
2123         -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET)
2124         -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET)
2125         -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET)
2126         -rm -f $(DEST_BIN)/xxd$(EXEEXT)
2127
2128 # Note: the "rmdir" will fail if any files were added after "make install"
2129 uninstall_runtime:
2130         -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS)
2131         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS)
2132         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS)
2133         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS)
2134         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS)
2135         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS)
2136         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS)
2137         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS)
2138         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS)
2139         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS)
2140         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS)
2141         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS)
2142         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2143                 $(DEST_MAN) $(INSTALLMLARGS)
2144         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2145                 $(DEST_MAN_FR) $(INSTALLMLARGS)
2146         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2147                 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
2148         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2149                 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
2150         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2151                 $(DEST_MAN_IT) $(INSTALLMLARGS)
2152         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2153                 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
2154         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2155                 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
2156         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2157                 $(DEST_MAN_PL) $(INSTALLMLARGS)
2158         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2159                 $(DEST_MAN_PL_I) $(INSTALLMLARGS)
2160         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2161                 $(DEST_MAN_PL_U) $(INSTALLMLARGS)
2162         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2163                 $(DEST_MAN_RU) $(INSTALLMLARGS)
2164         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2165                 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
2166         -rm -f $(DEST_MAN)/xxd.1
2167         -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1
2168         -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1
2169         -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1
2170         -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1
2171         -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl
2172         -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-??
2173         -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE)
2174         -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE)
2175         -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim
2176         -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE)
2177         -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE)
2178         -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE)
2179         -rm -f $(SYS_OPTWIN_FILE)
2180         -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt
2181         -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt
2182         -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt
2183         -rm -rf $(DEST_MACRO)
2184         -rm -rf $(DEST_TUTOR)
2185         -rm -rf $(DEST_SPELL)
2186         -rm -rf $(DEST_TOOLS)
2187         -rm -rf $(DEST_LANG)
2188         -rm -rf $(DEST_KMAP)
2189         -rm -rf $(DEST_COMP)
2190         -rm -f $(DEST_PRINT)/*.ps
2191         -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND)
2192         -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt
2193         -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim
2194         -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt
2195         -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT)
2196 #       This will fail when other Vim versions are installed, no worries.
2197         -rmdir $(DEST_VIM)
2198
2199 # Clean up all the files that have been produced, except configure's.
2200 # We support common typing mistakes for Juergen! :-)
2201 clean celan: testclean
2202         -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o
2203         -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c
2204         -rm -f conftest* *~ auto/link.sed
2205         -rm -rf $(APPDIR)
2206         if test -d $(PODIR); then \
2207                 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \
2208         fi
2209
2210 # Make a shadow directory for compilation on another system or with different
2211 # features.
2212 SHADOWDIR = shadow
2213
2214 shadow: runtime pixmaps
2215         mkdir $(SHADOWDIR)
2216         cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs .
2217         mkdir $(SHADOWDIR)/auto
2218         cd $(SHADOWDIR)/auto; ln -s ../../auto/configure .
2219         cd $(SHADOWDIR); rm -f auto/link.sed
2220         cp Makefile configure $(SHADOWDIR)
2221         rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist
2222         cp config.mk.dist $(SHADOWDIR)/auto/config.mk
2223         cp config.mk.dist $(SHADOWDIR)
2224         mkdir $(SHADOWDIR)/xxd
2225         cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* .
2226         if test -d $(RSRC_DIR); then \
2227                 cd $(SHADOWDIR); \
2228                 ln -s ../infplist.xml .; \
2229                 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \
2230         fi
2231         mkdir $(SHADOWDIR)/testdir
2232         cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \
2233                                  ../../testdir/vimrc.unix \
2234                                  ../../testdir/*.in \
2235                                  ../../testdir/*.vim \
2236                                  ../../testdir/*.ok .
2237
2238 # Link needed for doing "make install" in a shadow directory.
2239 runtime:
2240         -ln -s ../runtime .
2241
2242 # Link needed for doing "make" using GTK in a shadow directory.
2243 pixmaps:
2244         -ln -s ../pixmaps .
2245
2246 # Update the synmenu.vim file with the latest Syntax menu.
2247 # This is only needed when runtime/makemenu.vim was changed.
2248 menu: ./vim ../runtime/makemenu.vim
2249         ./vim -u ../runtime/makemenu.vim
2250
2251 # Start configure from scratch
2252 scrub scratch:
2253         -rm -f auto/config.status auto/config.cache config.log auto/config.log
2254         -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk
2255         touch auto/config.h
2256         cp config.mk.dist auto/config.mk
2257
2258 distclean: clean scratch
2259         -rm -f tags
2260
2261 dist: distclean
2262         @echo
2263         @echo Making the distribution has to be done in the top directory
2264
2265 mdepend:
2266         -@rm -f Makefile~
2267         cp Makefile Makefile~
2268         sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2269         @for i in $(ALL_SRC) ; do \
2270           echo "$$i" ; \
2271           echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\
2272             $(CPP) $$i |\
2273             grep '^# .*"\./.*\.h"' |\
2274             sort -t'"' -u +1 -2 |\
2275             sed -e 's/.*"\.\/\(.*\)".*/\1/'\
2276             ` >> tmp_make ; \
2277         done
2278         mv tmp_make Makefile
2279
2280 depend:
2281         -@rm -f Makefile~
2282         cp Makefile Makefile~
2283         sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2284         -for i in $(ALL_SRC); do echo $$i; \
2285                 $(CPP_DEPEND) $$i | \
2286                 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done
2287         mv tmp_make Makefile
2288
2289 # Run lint.  Clean up the *.ln files that are sometimes left behind.
2290 lint:
2291         lint $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC)
2292         -rm -f *.ln
2293
2294 # Check dosinst.c with lint.
2295 lintinstall:
2296         lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c
2297         -rm -f dosinst.ln
2298
2299 ###########################################################################
2300
2301 .c.o:
2302         $(CCC) $<
2303
2304 auto/if_perl.c: if_perl.xs
2305         $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@
2306         $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \
2307             $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@
2308
2309 auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in
2310         CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh
2311
2312 QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
2313 auto/pathdef.c: Makefile auto/config.mk
2314         -@echo creating $@
2315         -@echo '/* pathdef.c */' > $@
2316         -@echo '/* This file is automatically created by Makefile' >> $@
2317         -@echo ' * DO NOT EDIT!  Change Makefile only. */' >> $@
2318         -@echo '#include "vim.h"' >> $@
2319         -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@
2320         -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@
2321         -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >>  $@
2322         -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >>  $@
2323         -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@
2324         -@if test -n "$(COMPILEDBY)"; then \
2325                 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \
2326                 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi
2327         -@echo '";' >> $@
2328         -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@
2329         -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi
2330         -@echo '";' >> $@
2331         -@sh $(srcdir)/pathdef.sh
2332
2333 # All the object files are put in the "objects" directory.  Since not all make
2334 # commands understand putting object files in another directory, it must be
2335 # specified for each file separately.
2336
2337 objects:
2338         mkdir objects
2339
2340 objects/MMBackend.o: MacVim/MMBackend.m
2341         $(CCC) -fobjc-exceptions -o $@ MacVim/MMBackend.m
2342
2343 objects/MacVim.o: MacVim/MacVim.m
2344         $(CCC) -o $@ MacVim/MacVim.m
2345
2346 objects/buffer.o: buffer.c
2347         $(CCC) -o $@ buffer.c
2348
2349 objects/charset.o: charset.c
2350         $(CCC) -o $@ charset.c
2351
2352 objects/diff.o: diff.c
2353         $(CCC) -o $@ diff.c
2354
2355 objects/digraph.o: digraph.c
2356         $(CCC) -o $@ digraph.c
2357
2358 objects/edit.o: edit.c
2359         $(CCC) -o $@ edit.c
2360
2361 objects/eval.o: eval.c
2362         $(CCC) -o $@ eval.c
2363
2364 objects/ex_cmds.o: ex_cmds.c
2365         $(CCC) -o $@ ex_cmds.c
2366
2367 objects/ex_cmds2.o: ex_cmds2.c
2368         $(CCC) -o $@ ex_cmds2.c
2369
2370 objects/ex_docmd.o: ex_docmd.c
2371         $(CCC) -o $@ ex_docmd.c
2372
2373 objects/ex_eval.o: ex_eval.c
2374         $(CCC) -o $@ ex_eval.c
2375
2376 objects/ex_getln.o: ex_getln.c
2377         $(CCC) -o $@ ex_getln.c
2378
2379 objects/fileio.o: fileio.c
2380         $(CCC) -o $@ fileio.c
2381
2382 objects/fold.o: fold.c
2383         $(CCC) -o $@ fold.c
2384
2385 objects/getchar.o: getchar.c
2386         $(CCC) -o $@ getchar.c
2387
2388 objects/hardcopy.o: hardcopy.c
2389         $(CCC) -o $@ hardcopy.c
2390
2391 objects/hashtab.o: hashtab.c
2392         $(CCC) -o $@ hashtab.c
2393
2394 objects/gui.o: gui.c
2395         $(CCC) -o $@ gui.c
2396
2397 objects/gui_at_fs.o: gui_at_fs.c
2398         $(CCC) -o $@ gui_at_fs.c
2399
2400 objects/gui_at_sb.o: gui_at_sb.c
2401         $(CCC) -o $@ gui_at_sb.c
2402
2403 objects/gui_athena.o: gui_athena.c
2404         $(CCC) -o $@ gui_athena.c
2405
2406 objects/gui_beval.o: gui_beval.c
2407         $(CCC) -o $@ gui_beval.c
2408
2409 objects/gui_gtk.o: gui_gtk.c
2410         $(CCC) -o $@ gui_gtk.c
2411
2412 objects/gui_gtk_f.o: gui_gtk_f.c
2413         $(CCC) -o $@ gui_gtk_f.c
2414
2415 objects/gui_gtk_x11.o: gui_gtk_x11.c
2416         $(CCC) -o $@ gui_gtk_x11.c
2417
2418 objects/gui_motif.o: gui_motif.c
2419         $(CCC) -o $@ gui_motif.c
2420
2421 objects/gui_xmdlg.o: gui_xmdlg.c
2422         $(CCC) -o $@ gui_xmdlg.c
2423
2424 objects/gui_xmebw.o: gui_xmebw.c
2425         $(CCC) -o $@ gui_xmebw.c
2426
2427 objects/gui_x11.o: gui_x11.c
2428         $(CCC) -o $@ gui_x11.c
2429
2430 objects/gui_photon.o: gui_photon.c
2431         $(CCC) -o $@ gui_photon.c
2432
2433 objects/gui_mac.o: gui_mac.c
2434         $(CCC) -o $@ gui_mac.c
2435
2436 objects/gui_macvim.o: MacVim/gui_macvim.m
2437         $(CCC) -fobjc-exceptions -o $@ MacVim/gui_macvim.m
2438
2439 objects/hangulin.o: hangulin.c
2440         $(CCC) -o $@ hangulin.c
2441
2442 objects/if_cscope.o: if_cscope.c
2443         $(CCC) -o $@ if_cscope.c
2444
2445 objects/if_xcmdsrv.o: if_xcmdsrv.c
2446         $(CCC) -o $@ if_xcmdsrv.c
2447
2448 objects/if_mzsch.o: if_mzsch.c
2449         $(CCC) -o $@ if_mzsch.c
2450
2451 objects/if_perl.o: auto/if_perl.c
2452         $(CCC) -o $@ auto/if_perl.c
2453
2454 objects/if_perlsfio.o: if_perlsfio.c
2455         $(CCC) -o $@ if_perlsfio.c
2456
2457 objects/if_python.o: if_python.c
2458         $(CCC) -o $@ if_python.c
2459
2460 objects/if_ruby.o: if_ruby.c
2461         $(CCC) -o $@ if_ruby.c
2462
2463 objects/if_sniff.o: if_sniff.c
2464         $(CCC) -o $@ if_sniff.c
2465
2466 objects/if_tcl.o: if_tcl.c
2467         $(CCC) -o $@ if_tcl.c
2468
2469 objects/integration.o: integration.c
2470         $(CCC) -o $@ integration.c
2471
2472 objects/main.o: main.c
2473         $(CCC) -o $@ main.c
2474
2475 objects/mark.o: mark.c
2476         $(CCC) -o $@ mark.c
2477
2478 objects/memfile.o: memfile.c
2479         $(CCC) -o $@ memfile.c
2480
2481 objects/memline.o: memline.c
2482         $(CCC) -o $@ memline.c
2483
2484 objects/menu.o: menu.c
2485         $(CCC) -o $@ menu.c
2486
2487 objects/message.o: message.c
2488         $(CCC) -o $@ message.c
2489
2490 objects/misc1.o: misc1.c
2491         $(CCC) -o $@ misc1.c
2492
2493 objects/misc2.o: misc2.c
2494         $(CCC) -o $@ misc2.c
2495
2496 objects/move.o: move.c
2497         $(CCC) -o $@ move.c
2498
2499 objects/mbyte.o: mbyte.c
2500         $(CCC) -o $@ mbyte.c
2501
2502 objects/normal.o: normal.c
2503         $(CCC) -o $@ normal.c
2504
2505 objects/ops.o: ops.c
2506         $(CCC) -o $@ ops.c
2507
2508 objects/option.o: option.c
2509         $(CCC) -o $@ option.c
2510
2511 objects/os_beos.o: os_beos.c
2512         $(CCC) -o $@ os_beos.c
2513
2514 objects/os_qnx.o: os_qnx.c
2515         $(CCC) -o $@ os_qnx.c
2516
2517 objects/os_macosx.o: os_macosx.c
2518         $(CCC) -o $@ os_macosx.c
2519
2520 objects/os_mac_conv.o: os_mac_conv.c
2521         $(CCC) -o $@ os_mac_conv.c
2522
2523 objects/os_unix.o: os_unix.c
2524         $(CCC) -o $@ os_unix.c
2525
2526 objects/pathdef.o: auto/pathdef.c
2527         $(CCC) -o $@ auto/pathdef.c
2528
2529 objects/py_config.o: $(PYTHON_CONFDIR)/config.c
2530         $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \
2531                 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
2532
2533 objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c
2534         $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \
2535                 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \
2536                 $(PYTHON_GETPATH_CFLAGS)
2537
2538 objects/pty.o: pty.c
2539         $(CCC) -o $@ pty.c
2540
2541 objects/popupmnu.o: popupmnu.c
2542         $(CCC) -o $@ popupmnu.c
2543
2544 objects/quickfix.o: quickfix.c
2545         $(CCC) -o $@ quickfix.c
2546
2547 objects/regexp.o: regexp.c
2548         $(CCC) -o $@ regexp.c
2549
2550 objects/screen.o: screen.c
2551         $(CCC) -o $@ screen.c
2552
2553 objects/search.o: search.c
2554         $(CCC) -o $@ search.c
2555
2556 objects/spell.o: spell.c
2557         $(CCC) -o $@ spell.c
2558
2559 objects/syntax.o: syntax.c
2560         $(CCC) -o $@ syntax.c
2561
2562 objects/tag.o: tag.c
2563         $(CCC) -o $@ tag.c
2564
2565 objects/term.o: term.c
2566         $(CCC) -o $@ term.c
2567
2568 objects/ui.o: ui.c
2569         $(CCC) -o $@ ui.c
2570
2571 objects/undo.o: undo.c
2572         $(CCC) -o $@ undo.c
2573
2574 objects/window.o: window.c
2575         $(CCC) -o $@ window.c
2576
2577 objects/workshop.o: workshop.c
2578         $(CCC) -o $@ workshop.c
2579
2580 objects/wsdebug.o: wsdebug.c
2581         $(CCC) -o $@ wsdebug.c
2582
2583 objects/netbeans.o: netbeans.c
2584         $(CCC) -o $@ netbeans.c
2585
2586 Makefile:
2587         @echo The name of the makefile MUST be "Makefile" (with capital M)!!!!
2588
2589 ###############################################################################
2590 ### MacOS X installation
2591 ###
2592 ### This installs a runnable Vim.app in $(prefix)
2593
2594 REZ    = /Developer/Tools/Rez
2595 RESDIR = $(APPDIR)/Contents/Resources
2596 VERSION = $(VIMMAJOR).$(VIMMINOR)
2597
2598 ### Common flags
2599 M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \
2600                 -DAPP_VER=$(VERSION)
2601
2602 install_macosx: gui_bundle
2603 # Remove the link to the runtime dir, don't want to copy all of that.
2604         -rm $(RESDIR)/vim/runtime
2605         $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix)
2606 # Generate the help tags file now, it won't work with "make installruntime".
2607         -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags
2608 # Install the runtime files.  Recursive!
2609         -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
2610 #       -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin
2611         srcdir=`pwd`; $(MAKE) -f Makefile installruntime \
2612                 VIMEXE=$$srcdir/$(VIMTARGET) \
2613                 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
2614                 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \
2615                 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \
2616                 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
2617                 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime
2618 # Put the link back.
2619         ln -s `pwd`/../runtime $(RESDIR)/vim
2620 # Copy rgb.txt, Mac doesn't always have X11
2621         $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
2622 # TODO: Create the vimtutor and/or gvimtutor application.
2623
2624 gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \
2625         bundle-language
2626
2627 $(RESDIR):
2628         mkdir -p $@
2629
2630 bundle-dir: $(APPDIR)/Contents $(VIMTARGET)
2631 # Make a link to the runtime directory, so that we can try out the executable
2632 # without installing it.
2633         mkdir -p $(RESDIR)/vim
2634         -ln -s `pwd`/../runtime $(RESDIR)/vim
2635
2636 bundle-executable: $(VIMTARGET)
2637         mkdir -p $(APPDIR)/Contents/MacOS
2638         cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET)
2639
2640 bundle-info:  bundle-dir
2641         @echo "Creating PkgInfo"
2642         @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo
2643         @echo "Creating Info.plist"
2644         m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist
2645
2646 bundle-resource: bundle-dir bundle-rsrc
2647         cp -f $(RSRC_DIR)/*.icns $(RESDIR)
2648
2649 ### Classic resources
2650 # Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9)
2651 # This file is also required for OS X Vim.
2652 bundle-rsrc: os_mac.rsr.hqx
2653         @echo "Creating resource fork"
2654         python dehqx.py $<
2655         rm -f gui_mac.rsrc
2656         mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc
2657
2658 # po/Make_osx.pl says something about generating a Mac message file
2659 # for Ukrananian.  Would somebody using Mac OS X in Ukranian
2660 # *really* be upset that Carbon Vim was not localised in
2661 # Ukranian?
2662 #
2663 #bundle-language: bundle-dir po/Make_osx.pl
2664 #       cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG)
2665 bundle-language: bundle-dir
2666
2667 $(APPDIR)/Contents:
2668         -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS
2669         -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj
2670
2671
2672 ###############################################################################
2673 ### (automatically generated by 'make depend')
2674 ### Dependencies:
2675 objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2676   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2677   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2678   arabic.h version.h
2679 objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2680   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2681   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2682   arabic.h
2683 objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2684   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2685   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2686   arabic.h
2687 objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2688   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2689   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2690   arabic.h
2691 objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2692   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2693   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2694   arabic.h
2695 objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2696   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2697   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2698   arabic.h version.h
2699 objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2700   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2701   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2702   arabic.h version.h
2703 objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \
2704   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2705   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2706   globals.h farsi.h arabic.h version.h
2707 objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \
2708   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2709   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2710   globals.h farsi.h arabic.h
2711 objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2712   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2713   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2714   arabic.h
2715 objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \
2716   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2717   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2718   globals.h farsi.h arabic.h
2719 objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2720   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2721   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2722   arabic.h
2723 objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2724   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2725   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2726   arabic.h
2727 objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2728   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2729   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2730   arabic.h
2731 objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \
2732   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2733   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2734   globals.h farsi.h arabic.h version.h
2735 objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2736   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2737   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2738   arabic.h
2739 objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \
2740   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2741   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2742   globals.h farsi.h arabic.h if_cscope.h
2743 objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \
2744   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2745   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2746   globals.h farsi.h arabic.h version.h
2747 objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2748   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2749   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2750   arabic.h farsi.c arabic.c
2751 objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2752   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2753   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2754   arabic.h
2755 objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2756   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2757   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2758   arabic.h
2759 objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2760   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2761   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2762   arabic.h
2763 objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2764   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2765   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2766   arabic.h
2767 objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2768   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2769   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2770   arabic.h
2771 objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2772   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2773   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2774   arabic.h version.h
2775 objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2776   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2777   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2778   arabic.h
2779 objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2780   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2781   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2782   arabic.h
2783 objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2784   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2785   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2786   arabic.h
2787 objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2788   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2789   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2790   arabic.h
2791 objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2792   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2793   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2794 objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2795   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2796   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2797   arabic.h
2798 objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2799   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2800   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2801   arabic.h os_unixx.h
2802 objects/pathdef.o: auto/pathdef.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \
2803   ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \
2804   ./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \
2805   ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h
2806 objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \
2807   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2808   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2809   globals.h farsi.h arabic.h
2810 objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \
2811   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2812   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2813   globals.h farsi.h arabic.h
2814 objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2815   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2816   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2817   arabic.h
2818 objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2819   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2820   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2821   arabic.h
2822 objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2823   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2824   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2825   arabic.h
2826 objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2827   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2828   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2829   arabic.h
2830 objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2831   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2832   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2833   arabic.h
2834 objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2835   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2836   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2837 objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2838   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2839   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2840   arabic.h
2841 objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2842   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2843   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2844 objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2845   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2846   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2847   arabic.h
2848 objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2849   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2850   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2851   arabic.h version.h
2852 objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2853   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2854   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2855   arabic.h
2856 objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2857   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2858   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2859 objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \
2860   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2861   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2862   globals.h farsi.h arabic.h ../pixmaps/stock_icons.h
2863 objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \
2864   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2865   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2866   globals.h farsi.h arabic.h gui_gtk_f.h
2867 objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \
2868   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2869   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2870   globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \
2871   ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \
2872   ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \
2873   ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \
2874   ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \
2875   ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2876   ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2877   ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2878   ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2879   ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2880   ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2881   ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2882   ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2883   ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2884   ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2885   ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2886   ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2887   ../pixmaps/tb_minwidth.xpm
2888 objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \
2889   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2890   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2891   globals.h farsi.h arabic.h
2892 objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \
2893   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2894   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2895   globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h
2896 objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \
2897   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2898   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2899   globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \
2900   ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \
2901   ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \
2902   ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2903   ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2904   ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2905   ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2906   ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2907   ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2908   ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2909   ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2910   ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2911   ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2912   ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2913   ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2914   ../pixmaps/tb_minwidth.xpm
2915 objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \
2916   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2917   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2918   globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \
2919   ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
2920 objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2921   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2922   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2923   arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \
2924   ../runtime/vim48x48.xpm
2925 objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \
2926   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2927   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2928   globals.h farsi.h arabic.h gui_at_sb.h
2929 objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \
2930   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2931   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2932   globals.h farsi.h arabic.h gui_at_sb.h
2933 objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2934   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2935   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2936 objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \
2937   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2938   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2939   globals.h farsi.h arabic.h
2940 objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \
2941   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2942   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2943   globals.h farsi.h arabic.h if_mzsch.h
2944 objects/if_perl.o: auto/if_perl.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \
2945   ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \
2946   ./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \
2947   ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h
2948 objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \
2949   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2950   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2951   globals.h farsi.h arabic.h
2952 objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \
2953   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2954   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2955   globals.h farsi.h arabic.h
2956 objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2957   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2958   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2959   arabic.h
2960 objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2961   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2962   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2963   arabic.h version.h
2964 objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \
2965   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2966   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2967   globals.h farsi.h arabic.h os_unixx.h
2968 objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \
2969   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2970   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2971   globals.h farsi.h arabic.h
2972 objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \
2973   os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \
2974   structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \
2975   proto.h globals.h farsi.h arabic.h version.h workshop.h
2976 objects/wsdebug.o: wsdebug.c
2977 objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \
2978   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2979   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2980   globals.h farsi.h arabic.h integration.h
2981 objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \
2982   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2983   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2984   globals.h farsi.h arabic.h version.h