docs/README.md

   1 ## About u360gts
   2
   3 - [History](history.md)
   4 - [Overview](overview.md)
   5
   6 ## Hardware
   7
   8 - [Frame](hardware-frame.md)
   9 - [List of components](hardware-list-of-components.md)
  10
  11 ## Installation
  12
  13 - [Wiring schematics](install-wiring-schematics.md)
  14
  15 ## Configuration
  16 - [Quick Start Guide](configuration-quick-start-guide.md)
  17 - [Loading the firmware](configuration-loading-firmware.md)
  18 - [Configurator](https://github.com/raul-ortega/u360gts-configurator)
  19 - [Magnetometer](configuration-compass.md)
  20 - [Pan servo](configuration-pan-servo.md)
  21 - [Tilt servo](configuration-tilt-servo.md)
  22 - [OFFSET setting](configuration-offset.md)
  23 - [PID Control](configuration-pid-controller.md)
  24 - [NOPID control system](configuration-nopid-system.md)
  25 - [GPS](configuration-gps.md)
  26
  27 ## Incoming Telemetry
  28
  29 - [Supported protocols](incomming-telemetry-protocols.md)
  30 - [Configuring serial 0 (UART1)](configuration-serial0.md)
  31 - [Protocol selection](ncommint-telemetry-protocol-selection.md)
  32
  33 ##  CLI mode
  34
  35 - Enter CLI mode
  36 - Save settings
  37 - Default settings
  38 - Enable/Disable features
  39 - Help
  40 - Full list of parameters
  41
  42 ## Display
  43 - [Supported hardware](display-supported-hardware.md)
  44 - [Description and operation](display-description-and-operation.md)
  45 - [GPS screen](display-gps.md)
  46 - [Telemetry screen](display-telemetry.md)
  47
  48 ## Local GPS
  49
  50 - Installation
  51 - Settings
  52 - [Set HOME position](set-home.md)
  53
  54 ## Outgoing Telemetry
  55
  56 - [Settings](outgoing-telemetry.md)
  57
  58 ## Virtual serial ports
  59
  60 - Configuration and function selection
  61 - Connections
  62
  63 ## Battery monitoring
  64
  65 - Voltage level
  66 - Settings
  67
  68 ## Buttons
  69
  70 - MENU
  71 - HOME