From e61df589a843d28483c6d94a9d7c0b3517e6e832 Mon Sep 17 00:00:00 2001 From: Ranjani Vaidyanathan Date: Thu, 23 Aug 2012 22:57:50 -0500 Subject: [PATCH] ENGR00221277 MX6DL/S - Set AXI clock to 270MHz Change AXI_CLK to be sourced from PLL3_PFD1_540MHz, so that it can run at 270MHz on MX6DL/S. This is required for improving VPU performance. Change AXI_CLK to be sourced from periph_clk just before the DDR freq is going to be dropped to 24MHz/50MHz. Change it back to PLL3_PFD1_540 when the DDR freq is back at 400MHz. Signed-off-by: Ranjani Vaidyanathan --- arch/arm/mach-mx6/bus_freq.c | 21 +++++++++++++++++++++ arch/arm/mach-mx6/clock.c | 3 ++- 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx6/bus_freq.c b/arch/arm/mach-mx6/bus_freq.c index 06454112eae..9304c48361f 100644 --- a/arch/arm/mach-mx6/bus_freq.c +++ b/arch/arm/mach-mx6/bus_freq.c @@ -101,6 +101,7 @@ static struct clk *pll3_sw_clk; static struct clk *pll2_200; static struct clk *mmdc_ch0_axi; struct regulator *vddsoc_cap_regulator; +static struct clk *pll3_540; static struct delayed_work low_bus_freq_handler; @@ -120,6 +121,14 @@ static void reduce_bus_freq_handler(struct work_struct *work) } if (!cpu_is_mx6sl()) { + if (cpu_is_mx6dl() && + (clk_get_parent(axi_clk) != periph_clk)) + /* Set the axi_clk to be sourced from the periph_clk. + * So that its frequency can be lowered down to 50MHz + * or 24MHz as the case may be. + */ + clk_set_parent(axi_clk, periph_clk); + clk_enable(pll3); if (lp_audio_freq) { /* Need to ensure that PLL2_PFD_400M is kept ON. */ @@ -303,6 +312,11 @@ int set_high_bus_freq(int high_bus_freq) if (audio_bus_freq_mode) clk_disable(pll2_400); + /* AXI_CLK is sourced from PLL3_PFD_540 on MX6DL */ + if (cpu_is_mx6dl() && + clk_get_parent(axi_clk) != pll3_540) + clk_set_parent(axi_clk, pll3_540); + clk_disable(pll3); } @@ -513,6 +527,13 @@ static int __devinit busfreq_probe(struct platform_device *pdev) return PTR_ERR(pll3); } + pll3_540 = clk_get(NULL, "pll3_pfd_540M"); + if (IS_ERR(pll3_540)) { + printk(KERN_DEBUG "%s: failed to get periph_clk\n", + __func__); + return PTR_ERR(pll3_540); + } + pll3_sw_clk = clk_get(NULL, "pll3_sw_clk"); if (IS_ERR(pll3_sw_clk)) { printk(KERN_DEBUG "%s: failed to get pll3_sw_clk\n", diff --git a/arch/arm/mach-mx6/clock.c b/arch/arm/mach-mx6/clock.c index 7fa93d0bb5f..93b60ac679e 100644 --- a/arch/arm/mach-mx6/clock.c +++ b/arch/arm/mach-mx6/clock.c @@ -5398,14 +5398,15 @@ int __init mx6_clocks_init(unsigned long ckil, unsigned long osc, /* pxp & epdc */ clk_set_parent(&ipu2_clk, &pll2_pfd_400M); clk_set_rate(&ipu2_clk, 200000000); + clk_set_parent(&axi_clk, &pll3_pfd_540M); } else if (cpu_is_mx6q()) { clk_set_parent(&gpu3d_core_clk[0], &mmdc_ch0_axi_clk[0]); clk_set_rate(&gpu3d_core_clk[0], 528000000); clk_set_parent(&ipu2_clk, &mmdc_ch0_axi_clk[0]); clk_set_parent(&ipu1_clk, &mmdc_ch0_axi_clk[0]); + clk_set_parent(&axi_clk, &periph_clk); } - clk_set_parent(&axi_clk, &periph_clk); /* Need to keep PLL3_PFD_540M enabled until AXI is sourced from it. */ clk_enable(&axi_clk); -- 2.11.4.GIT