release/src/Makefile

   1
   2 #
   3 # Toplevel Makefile for the BCM947xx Linux Router release
   4 #
   5 # Copyright 2005, Broadcom Corporation
   6 # All Rights Reserved.
   7 #
   8 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   9 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
  10 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  11 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  12 #
  13 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  14 #
  15
  16 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  17
  18 # To rebuild everything and all configurations:
  19 #  make distclean
  20 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m n
  21 # The 1st "whatever" would be the build number, the sub-whatever would
  22 #       be the update to the version.
  23 #
  24 # Example:
  25 # make V1=8516 V2="-jffs.1" a b c d m s
  26
  27 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  28
  29
  30 export ac_cv_func_malloc_0_nonnull=yes
  31 export SRCBASE := $(shell pwd)
  32 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  33 PATH := $(RELEASEDIR)/tools:$(PATH)
  34 export TPROFILE := N
  35
  36 include ./target.mak
  37
  38 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  39 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  40 current_TOMATO_V1 ?= "--def"
  41 VPN ?= "VPN"
  42 NC ?="NOCAT"
  43 NG ?="NGINX"
  44 ifeq ($(CONFIG_LINUX26),y)
  45 ifeq ($(CONFIG_BCMWL6),y)
  46 ND = "K26AC"
  47 else
  48 ND = "K26"
  49 endif
  50 else
  51 ND = "ND"
  52 endif
  53 SNMP ?= "n"
  54 VLAN ?= "n"
  55 USERPPTP ?= "n"
  56 PPTPD ?= "n"
  57 TCPDUMP ?= "n"
  58 DNSCRYPT ?= "n"
  59
  60 ifeq ($(NVRAM_SIZE),)
  61 NVRAM_SIZE = 0
  62 else
  63 EXTRA_PREDESC = ''
  64 endif
  65
  66 ifeq ($(AC66U),)
  67 AC66U = 0
  68 endif
  69
  70 ifeq ($(W1800R),)
  71 W1800R = 0
  72 endif
  73
  74 ifeq ($(WNR3500LV2),)
  75 WNR3500LV2 = 0
  76 else
  77 WNRTOOL=$(SRCBASE)/wnrtool
  78 BOARD_FILE=$(WNRTOOL)/compatible_WNR3500Lv2.txt
  79 fw_cfg_file := $(WNRTOOL)/ambitCfg.h
  80 endif
  81
  82 ifeq ($(NVRAM_64K),y)
  83 EXTRA_64KDESC = ' -64K'
  84 EXTRA_64KCFLAG = '-DTCONFIG_NVRAM_64K'
  85 else
  86 EXTRA_64KDESC = ''
  87 EXTRA_64KCFLAG = ''
  88 endif
  89
  90 -include tomato_profile.mak
  91
  92 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  93 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  94 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  95 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  96 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  97 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  98 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  99 current_TOMATO_MIPS32 = $(strip $(shell grep "^TOMATO_BUILD_MIPS32"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
 100 current_TOMATO_V1 = $(strip $(shell grep "^TOMATO_BUILD_V1"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
 101 current_TOMATO_V2 = $(strip $(shell grep "^TOMATO_BUILD_V2"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
 102 current_TOMATO_B = $(strip $(shell grep "^TOMATO_BUILD_NAME"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
 103 current_TOMATO_N = $(strip $(shell grep "^TOMATO_PROFILE_NAME"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
 104 N=$(current_TOMATO_N)
 105 B=$(current_TOMATO_B)
 106
 107 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
 108 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
 109 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
 110 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
 111
 112 ifeq ($(CONFIG_LINUX26),y)
 113 mips_rev = $(if $(filter $(current_TOMATO_MIPS32),r2),MIPSR2,MIPSR1)
 114
 115 KERN_SIZE_OPT ?= n
 116 else
 117 mips_rev =
 118 KERN_SIZE_OPT ?= y
 119 endif
 120
 121 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
 122
 123 tomato_ver:
 124         @echo ""
 125         @btools/uversion.pl --gen $(current_TOMATO_V1) $(mips_rev)$(beta)$(current_TOMATO_V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
 126
 127 ifeq ($(TOMATO_BUILD),)
 128
 129 all:
 130         $(MAKE) a
 131
 132 else
 133
 134 all: tomato_ver
 135         @echo ""
 136         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
 137
 138         @echo ""
 139         @echo ""
 140
 141         @-mkdir image
 142         @$(MAKE) -C router all
 143         @$(MAKE) -C router install
 144         @$(MAKE) -C btools
 145
 146         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).trx
 147         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 148
 149 ifeq ($(AC66U),1)
 150         $(MAKE) -C ctools
 151         # Create generic TRX image
 152         ctools/objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUXDIR)/vmlinux ctools/piggy
 153         ctools/lzma_4k e ctools/piggy  ctools/vmlinuz-lzma
 154         ctools/mksquashfs router/mipsel-uclibc/target ctools/target.squashfs -noappend -all-root
 155         ctools/trx -o image/linux-lzma.trx ctools/vmlinuz-lzma ctools/target.squashfs
 156         ctools/trx_asus -i image/linux-lzma.trx -r $(BUILD_NAME),$(KERNEL_VER).$(FS_VER),image/tomato-RT-AC66U_$(V1)$(V2)-$(current_BUILD_DESC).trx
 157         @rm -f image/linux-lzma.trx
 158         @echo ""
 159 endif
 160
 161 ifeq ($(W1800R),1)
 162         $(MAKE) -C ctools
 163         ctools/objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUXDIR)/vmlinux ctools/piggy
 164         ctools/lzma_4k e ctools/piggy  ctools/vmlinuz-lzma
 165         ctools/mksquashfs router/mipsel-uclibc/target ctools/target.squashfs -noappend -all-root
 166         ctools/trx -o image/linux-lzma.trx ctools/vmlinuz-lzma ctools/target.squashfs
 167         ctools/trx_asus -i image/linux-lzma.trx -r $(BUILD_NAME),$(KERNEL_VER).$(FS_VER),image/tomato-W1800R_$(V1)$(V2)-$(current_BUILD_DESC).trx
 168         @rm -f image/linux-lzma.trx
 169         @echo ""
 170 endif
 171
 172 ifeq ($(WNR3500LV2),y)
 173         @echo "Creating Firmware for Netgear WNR3500L v2 .... "
 174         mipsel-uclibc-objcopy -O binary -g $(LINUXDIR)/vmlinux image/vmlinux.bin
 175         $(WNRTOOL)/lzma e image/vmlinux.bin image/vmlinux.lzma
 176         $(WNRTOOL)/trx -o image/tomato-wnr3500lv2.trx image/vmlinux.lzma $(SRCBASE)/router/mipsel-uclibc/target.image
 177         rm -f image/vmlinux.bin image/vmlinux.lzma
 178         cd image && touch rootfs
 179         cd image && $(WNRTOOL)/packet -k tomato-wnr3500lv2.trx -f rootfs -b $(BOARD_FILE) -ok kernel_image -oall kernel_rootfs_image -or rootfs_image -i $(fw_cfg_file) && rm -f rootfs && \
 180         cp kernel_rootfs_image.chk tomato-Netgear-3500Lv2-$(ND)$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(current_TOMATO_V2)-$(current_BUILD_DESC).chk
 181         @echo "Cleanup ...."
 182         rm -f image/*image.chk image/*.trx
 183 endif
 184
 185 ifeq ($(WRT54),y)
 186 ifneq ($(current_TOMATO_MIPS32),r2)
 187         @rm -f image/tomato-WRT54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 188         @rm -f image/tomato-WRTSL54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 189         @rm -f image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 190 endif
 191 endif
 192 ifeq ($(LINKSYS_E),y)
 193         @rm -f image/tomato-E??????$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 194 endif
 195 ifeq ($(LINKSYS_E_64k),y)
 196         @rm -f image/tomato-E??????$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 197 endif
 198 ifeq ($(LINKSYS_E1200v1),y)
 199         @rm -f image/tomato-E1200v1$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 200 endif
 201 ifeq ($(LINKSYS_E1000v2),y)
 202         @rm -f image/tomato-E1000v2-v21$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 203         @rm -f image/tomato-Cisco-M10v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 204 endif
 205 ifeq ($(BELKIN),y)
 206 ifneq ($(NVRAM_SIZE),60)
 207         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 208         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 209 endif
 210 endif
 211 ifeq ($(BELKIN),y)
 212 ifneq ($(NVRAM_SIZE),60)
 213         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 214         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 215 endif
 216 endif
 217         @echo "" >>fpkg.log
 218         @echo "***********************" `date` "************************" >>fpkg.log
 219         @cat router/shared/tomato_version >>fpkg.log
 220         @echo "" >>fpkg.log
 221         @cat router/target.info >>fpkg.log
 222 ifeq ($(WRT54),y)
 223 ifneq ($(current_TOMATO_MIPS32),r2)
 224         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 225                 -l W54G,image/tomato-WRT54G_WRT54GL$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 226                 -l W54S,image/tomato-WRT54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 227                 -l W54s,image/tomato-WRT54GSv4$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 228                 -l W54U,image/tomato-WRTSL54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 229                 -m 0x10577050,image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 230                 | tee -a fpkg.log
 231 endif
 232 endif
 233 ifeq ($(LINKSYS_E),y)
 234         # Linksys E-series(60k Nvram) images
 235         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 236                 -l 1550,image/tomato-E1550$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 237                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 238                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 239                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 240                 | tee -a fpkg.log
 241 endif
 242 ifeq ($(LINKSYS_E2500),y)
 243         # Linksys E2500(60k Nvram) image
 244         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 245                 -l E25X,image/tomato-E2500$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 246                 | tee -a fpkg.log
 247 endif
 248 ifeq ($(LINKSYS_E3200),y)
 249         # Linksys E3200(60k Nvram) image
 250         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 251                 -l 3200,image/tomato-E3200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 252                 | tee -a fpkg.log
 253 endif
 254 ifeq ($(LINKSYS_E_64k),y)
 255         # Linksys E-series(64k Nvram) images
 256         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 257                 -l E800,image/tomato-E800$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 258                 -l E900,image/tomato-E900$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 259                 -l E122,image/tomato-E1200v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 260                 -l E150,image/tomato-E1500$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 261                 | tee -a fpkg.log
 262 endif
 263 ifeq ($(LINKSYS_E1000v2),y)
 264         # Linksys E1000v2/v2.1 images
 265         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 266                 -l E100,image/tomato-E1000v2-v21$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 267                 -l M010,image/tomato-Cisco-M10v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 268                 | tee -a fpkg.log
 269 endif
 270 ifeq ($(LINKSYS_E1200v1),y)
 271         # Linksys E1200v1 images
 272         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 273                 -l E120,image/tomato-E1200v1$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 274                 | tee -a fpkg.log
 275 endif
 276 ifeq ($(BELKIN),y)
 277 ifneq ($(NVRAM_SIZE),60)
 278         # Create Belkin images
 279         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 280                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 281                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 282                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 283                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 284                 | tee -a fpkg.log
 285 endif
 286 endif
 287         # Create generic TRX image
 288         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 289                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).trx \
 290                 | tee -a fpkg.log
 291
 292         @cp fpkg.log image/fpkg-$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2).log
 293         @echo ""
 294         @echo "-----------------"
 295         @echo `cat router/shared/tomato_version` " ready"
 296         @echo "-----------------"
 297 ifneq ($(NOVERSION),1)
 298         @cp router/shared/tomato_version router/shared/tomato_version_last
 299         @btools/uversion.pl --bump
 300 endif
 301 endif
 302
 303
 304
 305 clean:
 306         @touch router/.config
 307         @rm -f router/config_[a-z]
 308         @rm -f router/busybox/config_[a-z]
 309         @$(MAKE) -C router $@
 310         @-rmdir router/mipsel-uclibc
 311
 312 cleanimage:
 313         @rm -f fpkg.log
 314         @rm -fr image/*
 315         @rm -f router/.config
 316         @touch router/.config
 317         @-mkdir image
 318
 319 cleantools:
 320         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 321         @$(MAKE) -C btools clean
 322
 323 cleankernel:
 324         @cd $(LINUXDIR) && \
 325         mv .config save-config && \
 326         $(MAKE) distclean || true; \
 327         cp -p save-config .config || true
 328
 329 kernel:
 330         @$(MAKE) -C router kernel
 331         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 332
 333 distclean: clean cleanimage cleankernel cleantools
 334 ifneq ($(INSIDE_MAK),1)
 335         @$(MAKE) -C router $@ INSIDE_MAK=1
 336 endif
 337         mv router/busybox/.config busybox-saved-config || true
 338         @$(MAKE) -C router/busybox distclean
 339         @rm -f router/busybox/config_current
 340         @cp -p busybox-saved-config router/busybox/.config || true
 341         @cp -p router/busybox/.config  router/busybox/config_current || true
 342         @rm -f router/config_current
 343         @rm -f router/.config.cmd router/.config.old router/.config
 344         @rm -f router/libfoo_xref.txt
 345         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 346         @touch tomato_profile.mak
 347         @touch router/shared/tomato_profile.h
 348
 349
 350 prepk:
 351         @cd $(LINUXDIR) ; \
 352                 rm -f config_current ; \
 353                 ln -s config_base config_current ; \
 354                 cp -f config_current .config
 355         $(MAKE) -C $(LINUXDIR) oldconfig
 356 ifneq ($(CONFIG_LINUX26),y)
 357         $(MAKE) -C $(LINUXDIR) dep
 358 endif
 359
 360 what:
 361         @echo ""
 362         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 363         @echo ""
 364
 365
 366 # The methodology for making the different builds is to
 367 # copy the "base" config file to the "target" config file in
 368 # the appropriate directory, and then edit it by removing and
 369 # inserting the desired configuration lines.
 370 # You can't just delete the "whatever=y" line, you must have
 371 # a "...is not set" line, or the make oldconfig will stop and ask
 372 # what to do.
 373
 374 # Options for "make bin" :
 375 # BUILD_DESC (Std|Lite|Ext|...)
 376 # MIPS32 (r2|r1)
 377 # WNR3500LV2 (0|1)
 378 # KERN_SIZE_OPT
 379 # USB ("USB"|"")
 380 # JFFSv1 | NO_JFFS
 381 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT, NO_FTP
 382 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM
 383 # NOCAT, SNMP, USERPPTP, VLAN, USBAP, NO_USBAPP, NGINX, DNSCRYPT
 384
 385 define RouterOptions
 386         @( \
 387         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 388                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 389                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 390         fi; \
 391         sed -i "/TCONFIG_EMF/d" $(1); \
 392         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 393                 if [ "$(SLIM)" = "y" ]; then \
 394                         echo "# TCONFIG_EMF is not set" >>$(1); \
 395                 else \
 396                         echo "TCONFIG_EMF=y" >>$(1); \
 397                 fi; \
 398         else \
 399                 echo "# TCONFIG_EMF is not set" >>$(1); \
 400         fi; \
 401         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 402         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 403                 if [ "$(JFFSv1)" = "y" ]; then \
 404                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 405                 else \
 406                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 407                 fi; \
 408         else \
 409                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 410         fi; \
 411         if [ "$(USB)" = "USB" ]; then \
 412                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 413                 echo "TCONFIG_USB=y" >>$(1); \
 414                 if [ "$(USBEXTRAS)" = "y" ]; then \
 415                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 416                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 417                 fi; \
 418                 if [ "$(NTFS)" = "y" ]; then \
 419                         sed -i "/TCONFIG_NTFS/d" $(1); \
 420                         echo "TCONFIG_NTFS=y" >>$(1); \
 421                 fi; \
 422                 if [ "$(MEDIASRV)" = "y" ]; then \
 423                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 424                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 425                 fi; \
 426         else \
 427                 sed -i "/TCONFIG_USB=y/d" $(1); \
 428                 echo "# TCONFIG_USB is not set" >>$(1); \
 429         fi; \
 430         if [ "$(NO_SAMBA)" = "y" ]; then \
 431                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 432                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 433         fi; \
 434         if [ "$(NO_ZEBRA)" = "y" ]; then \
 435                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 436                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 437         fi; \
 438         if [ "$(NO_JFFS)" = "y" ]; then \
 439                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 440                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 441                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 442                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 443         fi; \
 444         if [ "$(NO_CIFS)" = "y" ]; then \
 445                 sed -i "/TCONFIG_CIFS/d" $(1); \
 446                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 447         fi; \
 448         if [ "$(NO_FTP)" = "y" ]; then \
 449                 sed -i "/TCONFIG_FTP/d" $(1); \
 450                 echo "# TCONFIG_FTP is not set" >>$(1); \
 451         fi; \
 452         if [ "$(NO_SSH)" = "y" ]; then \
 453                 sed -i "/TCONFIG_SSH/d" $(1); \
 454                 echo "# TCONFIG_SSH is not set" >>$(1); \
 455         fi; \
 456         if [ "$(NO_HTTPS)" = "y" ]; then \
 457                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 458                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 459         fi; \
 460         if [ "$(NO_XXTP)" = "y" ]; then \
 461                 sed -i "/TCONFIG_L2TP/d" $(1); \
 462                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 463                 sed -i "/TCONFIG_PPTP/d" $(1); \
 464                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 465         fi; \
 466         if [ "$(NO_LIBOPT)" = "y" ]; then \
 467                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 468                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 469         fi; \
 470         if [ "$(EBTABLES)" = "y" ]; then \
 471                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 472                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 473         fi; \
 474         if [ "$(IPV6SUPP)" = "y" ]; then \
 475                 sed -i "/TCONFIG_IPV6/d" $(1); \
 476                 echo "TCONFIG_IPV6=y" >>$(1); \
 477         fi; \
 478         if [ "$(NOCAT)" = "y" ]; then \
 479                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 480                 echo "TCONFIG_NOCAT=y" >>$(1); \
 481         fi; \
 482         if [ "$(NGINX)" = "y" ]; then \
 483                 sed -i "/TCONFIG_NGINX/d" $(1); \
 484                 sed -i "/TCONFIG_ZLIB/d" $(1); \
 485                 echo "TCONFIG_NGINX=y" >>$(1); \
 486                 echo "TCONFIG_ZLIB=y" >>$(1); \
 487         fi; \
 488         if [ "$(OPENVPN)" = "y" ]; then \
 489                 sed -i "/TCONFIG_LZO/d" $(1); \
 490                 echo "TCONFIG_LZO=y" >>$(1); \
 491                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 492                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 493                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 494                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 495                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 496                 fi; \
 497         fi; \
 498         if [ "$(SNMP)" = "y" ]; then \
 499                 sed -i "/TCONFIG_SNMP/d" $(1); \
 500                 echo "TCONFIG_SNMP=y" >>$(1); \
 501         fi; \
 502         if [ "$(USERPPTP)" = "y" ]; then \
 503                 sed -i "/TCONFIG_USERPPTP/d" $(1); \
 504                 echo "TCONFIG_USERPPTP=y" >>$(1); \
 505         fi; \
 506         if [ "$(VLAN)" = "y" ]; then \
 507                 sed -i "/TCONFIG_VLAN/d" $(1); \
 508                 echo "TCONFIG_VLAN=y" >>$(1); \
 509         fi; \
 510         if [ "$(PPTPD)" = "y" ]; then \
 511                 sed -i "/TCONFIG_PPTPD/d" $(1); \
 512                 echo "TCONFIG_PPTPD=y" >>$(1); \
 513         fi; \
 514         if [ "$(DNSCRYPT)" = "y" ]; then \
 515                 sed -i "/TCONFIG_DNSCRYPT/d" $(1); \
 516                 echo "TCONFIG_DNSCRYPT=y" >>$(1); \
 517         fi; \
 518         if [ "$(NVRAM_64K)" = "y" ]; then \
 519                 sed -i "/TCONFIG_NVRAM_64K/d" $(1); \
 520                 echo "TCONFIG_NVRAM_64K=y" >>$(1); \
 521         fi; \
 522         if [ "$(TCPDUMP)" = "y" ]; then \
 523                 sed -i "/TCONFIG_TCPDUMP/d" $(1); \
 524                 echo "TCONFIG_TCPDUMP=y" >>$(1); \
 525                 fi; \
 526 if [ "$(USBAP)" = "y" ]; then \
 527                 sed -i "/TCONFIG_USBAP/d" $(1); \
 528                 echo "TCONFIG_USBAP=y" >>$(1); \
 529                 if [ "$(NO_USBAPP)" = "y" ]; then \
 530                         sed -i "/TCONFIG_REMOVE_USBAPP/d" $(1); \
 531                         echo "TCONFIG_REMOVE_USBAPP=y" >>$(1); \
 532                         sed -i "/TCONFIG_FTP/d" $(1); \
 533                         echo "# TCONFIG_FTP is not set" >>$(1); \
 534                         echo "# TCONFIG_FTP_SSL is not set" >>$(1); \
 535                         sed -i "/TCONFIG_SAMBA/d" $(1); \
 536                         echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 537                         echo "# TCONFIG_SAMBA3 is not set" >>$(1); \
 538                 fi; \
 539         fi; \
 540         )
 541 endef
 542
 543 define BusyboxOptions
 544         @( \
 545         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 546                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 547                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 548                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 549                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 550                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 551                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 552                 sed -i "/CONFIG_MKNOD/d" $(1); \
 553                 echo "CONFIG_MKNOD=y" >>$(1); \
 554                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 555                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 556         else \
 557                 sed -i "/CONFIG_UDHCPC=y/d" $(1); \
 558                 sed -i "/CONFIG_UDHCPC_OLD/d" $(1); \
 559                 echo "CONFIG_UDHCPC_OLD=y" >>$(1); \
 560                 echo "# CONFIG_UDHCPC is not set" >>$(1); \
 561         fi; \
 562         if [ "$(NO_CIFS)" = "y" ]; then \
 563                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 564                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 565         fi; \
 566         if [ "$(BBEXTRAS)" = "y" ]; then \
 567                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 568                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 569                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 570                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 571                 sed -i "/CONFIG_FTPPUT/d" $(1); \
 572                 echo "CONFIG_FTPPUT=y" >>$(1); \
 573                 sed -i "/CONFIG_FTPGET/d" $(1); \
 574                 echo "CONFIG_FTPGET=y" >>$(1); \
 575                 sed -i "/CONFIG_CLEAR/d" $(1); \
 576                 echo "CONFIG_CLEAR=y" >>$(1); \
 577                 sed -i "/CONFIG_NICE/d" $(1); \
 578                 echo "CONFIG_NICE=y" >>$(1); \
 579                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 580                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 581                 sed -i "/CONFIG_MKFIFO/d" $(1); \
 582                 echo "CONFIG_MKFIFO=y" >>$(1); \
 583         fi; \
 584         if [ "$(USB)" = "USB" ]; then \
 585                 if [ "$(USBEXTRAS)" = "y" ]; then \
 586                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 587                         echo "CONFIG_E2FSCK=y" >>$(1); \
 588                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 589                         echo "CONFIG_MKE2FS=y" >>$(1); \
 590                         sed -i "/CONFIG_FDISK/d" $(1); \
 591                         echo "CONFIG_FDISK=y" >>$(1); \
 592                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 593                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 594                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 595                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 596                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 597                         echo "CONFIG_MKSWAP=y" >>$(1); \
 598                         sed -i "/CONFIG_FLOCK/d" $(1); \
 599                         echo "CONFIG_FLOCK=y" >>$(1); \
 600                         sed -i "/CONFIG_FSYNC/d" $(1); \
 601                         echo "CONFIG_FSYNC=y" >>$(1); \
 602                         sed -i "/CONFIG_TUNE2FS/d" $(1); \
 603                         echo "CONFIG_TUNE2FS=y" >>$(1); \
 604                         sed -i "/CONFIG_E2LABEL/d" $(1); \
 605                         echo "CONFIG_E2LABEL=y" >>$(1); \
 606                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 607                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 608                                 echo "CONFIG_LSUSB=y" >>$(1); \
 609                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 610                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 611                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 612                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 613                         fi; \
 614                 fi; \
 615         else \
 616                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 617                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 618                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 619                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 620                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 621                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 622                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 623                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 624                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 625                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 626                 sed -i "/CONFIG_BLKID/d" $(1); \
 627                 echo "# CONFIG_BLKID is not set" >>$(1); \
 628                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 629                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 630                 sed -i "/CONFIG_CHROOT/d" $(1); \
 631                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 632                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 633                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 634                 sed -i "/CONFIG_TRUE/d" $(1); \
 635                 echo "# CONFIG_TRUE is not set" >>$(1); \
 636         fi; \
 637         if [ "$(IPV6SUPP)" = "y" ]; then \
 638                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 639                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 640                 sed -i "/CONFIG_PING6/d" $(1); \
 641                 echo "CONFIG_PING6=y" >>$(1); \
 642                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 643                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 644                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 645                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 646                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 647                 fi; \
 648         fi; \
 649         if [ "$(SLIM)" = "y" ]; then \
 650                 sed -i "/CONFIG_AWK/d" $(1); \
 651                 echo "# CONFIG_AWK is not set" >>$(1); \
 652                 sed -i "/CONFIG_BASENAME/d" $(1); \
 653                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 654                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 655                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 656                 sed -i "/CONFIG_BLKID/d" $(1); \
 657                 echo "# CONFIG_BLKID is not set" >>$(1); \
 658                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 659                 echo "# CONFIG_TELNET is not set" >>$(1); \
 660                 sed -i "/CONFIG_ARPING/d" $(1); \
 661                 echo "# CONFIG_ARPING is not set" >>$(1); \
 662                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 663                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 664                 sed -i "/CONFIG_CHOWN/d" $(1); \
 665                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 666         else \
 667                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 668                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 669                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 670                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 671         fi; \
 672         )
 673 endef
 674
 675 define KernelConfig
 676         @( \
 677         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 678         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 679         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 680         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 681                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 682         else \
 683                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 684         fi; \
 685         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 686                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 687                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 688                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 689                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 690                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 691                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 692 if [ "$(NAND)" = "y" ]; then \
 693                         sed -i "/CONFIG_MTD_NFLASH/d" $(1); \
 694                         echo "CONFIG_MTD_NFLASH=y" >>$(1); \
 695                         sed -i "/CONFIG_MTD_NAND/d" $(1); \
 696                         echo "CONFIG_MTD_NAND=y" >>$(1); \
 697                         echo "CONFIG_MTD_NAND_IDS=y" >>$(1); \
 698                         echo "# CONFIG_MTD_NAND_VERIFY_WRITE is not set" >>$(1); \
 699                         echo "# CONFIG_MTD_NAND_ECC_SMC is not set" >>$(1); \
 700                         echo "# CONFIG_MTD_NAND_MUSEUM_IDS is not set" >>$(1); \
 701                         echo "# CONFIG_MTD_NAND_DISKONCHIP is not set" >>$(1); \
 702                         echo "# CONFIG_MTD_NAND_CAFE is not set" >>$(1); \
 703                         echo "# CONFIG_MTD_NAND_NANDSIM is not set" >>$(1); \
 704                         echo "# CONFIG_MTD_NAND_PLATFORM is not set" >>$(1); \
 705                         echo "# CONFIG_MTD_NAND_ONENAND is not set" >>$(1); \
 706                         sed -i "/CONFIG_MTD_BRCMNAND/d" $(1); \
 707                         echo "CONFIG_MTD_BRCMNAND=y" >>$(1); \
 708                 fi; \
 709                 if [ "$(WNR3500LV2)" = "y" ]; then \
 710                         sed -i "/CONFIG_MTD_NFLASH/d" $(1); \
 711                         echo "CONFIG_MTD_NFLASH=y" >>$(1); \
 712                 fi; \
 713         fi; \
 714         if [ "$(USB)" = "" ]; then \
 715                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 716                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 717         fi; \
 718         if [ "$(IPV6SUPP)" = "y" ]; then \
 719                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 720                 echo "CONFIG_IPV6=y" >>$(1); \
 721                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 722                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 723                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 724                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 725                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 726                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 727                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 728                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 729                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 730                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 731                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 732                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 733                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 734                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 735                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 736                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 737                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 738                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 739                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 740                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 741                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 742                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 743                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 744                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 745                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 746                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 747                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 748                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 749                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 750                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 751                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 752                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 753                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 754                 else \
 755                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 756                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 757                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 758                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 759                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 760                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 761                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 762                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 763                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 764                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 765                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 766                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 767                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 768                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 769                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 770                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 771                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 772                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 773                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 774                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 775                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 776                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 777                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 778                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 779                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 780                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 781                 fi; \
 782         fi; \
 783         sed -i "/CONFIG_BCM57XX/d" $(1); \
 784         if [ "$(BCM57)" = "y" ]; then \
 785                 echo "CONFIG_BCM57XX=m" >>$(1); \
 786         else \
 787                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 788         fi; \
 789         if [ "$(USBAP)" = "y" ]; then \
 790                 echo "CONFIG_WL_USBAP=y" >>$(1); \
 791                 echo 'CONFIG_WL_APSTA="wlconfig_lx_router_high"' >>$(1); \
 792         else \
 793                 echo "# CONFIG_WL_USBAP is not set" >>$(1); \
 794                 echo 'CONFIG_WL_APSTA="wlconfig_lx_router_apsta"' >>$(1); \
 795         fi; \
 796         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 797                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 798                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 799                 if [ "$(IPV6SUPP)" = "y" ]; then \
 800                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 801                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 802                 fi; \
 803         fi; \
 804         sed -i "/CONFIG_NVRAM_64K/d" $(1); \
 805         if [ "$(NVRAM_64K)" = "y" ]; then \
 806                 echo "CONFIG_NVRAM_64K=y" >>$(1); \
 807         else \
 808                 echo "# CONFIG_NVRAM_64K is not set" >>$(1); \
 809         fi \
 810         )
 811 endef
 812
 813
 814 bin:
 815 ifeq ($(B),)
 816         @echo $@" is not a valid target!"
 817         @false
 818 endif
 819         @cp router/config_base router/config_$(lowercase_B)
 820         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 821         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 822
 823         $(call RouterOptions, router/config_$(lowercase_B))
 824         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 825         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 826
 827         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)" MIPS32="${MIPS32}" V1="${V1}" V2="${V2}"
 828         @$(MAKE) all
 829
 830 ## Make the "normal" build
 831 a:
 832         @$(MAKE) bin B=A BUILD_DESC="Std" USB="USB" VLAN="$(VLAN)" SNMP=y
 833
 834 ## Make the "normal but without SSH" build
 835 b:
 836         @$(MAKE) bin NO_SSH=y B=B BUILD_DESC="No SSH" USB="USB" VLAN="$(VLAN)" SNMP=y
 837
 838 ## Make the "normal but without CIFS" build
 839 c:
 840         @$(MAKE) bin NO_CIFS=y B=C BUILD_DESC="No CIFS" USB="USB" VLAN="$(VLAN)" SNMP=y
 841
 842 ## Make the "normal but without SAMBA" (Lite) build
 843 d:
 844 ifeq ($(CONFIG_LINUX26),y)
 845         @$(MAKE) bin NO_SAMBA=y SLIM=y NO_CIFS=y NO_JFFS=y NO_ZEBRA=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 846 else
 847         @$(MAKE) bin NO_SAMBA=y SLIM=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 848 endif
 849
 850 ## Make the "normal (with NTFS support) + VPN" build
 851 e:
 852 ifeq ($(CONFIG_LINUX26),y)
 853         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" SNMP=y DNSCRYPT=y TCPDUMP="$(TCPDUMP)"
 854 else
 855 #       @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)"
 856         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y BBEXTRAS=y USBEXTRAS=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y DNSCRYPT=y  VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 857 endif
 858
 859 ## Make the "Mini: no USB, no CIFS, no Zebra" build - targeted for Netgear routers
 860 f:
 861         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_ZEBRA=y SLIM=y B=F BUILD_DESC="Mini" USB="" VLAN="$(VLAN)"
 862
 863 ## Make the "Tiny: no JFFS, no USB, no CIFS, no Zebra" build - targeted for cheapskate routers
 864 fs:
 865         @$(MAKE) bin NO_CIFS=y NO_SSH=y NO_JFFS=y NO_ZEBRA=y SLIM=y B=FS BUILD_DESC="Tiny" USB="" VLAN="$(VLAN)"
 866
 867 ## Make the "No USB with IPv6, no Zebra" build - for 4MB routers
 868 i:
 869         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB="" VLAN="$(VLAN)"
 870
 871 ## Make the "No USB with IPv6, no Zebra, with VPN" build - for 4MB routers
 872 ifeq ($(CONFIG_LINUX26),y)
 873 j:
 874         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_XXTP=y SLIM=y NO_SAMBA=y NO_ZEBRA=y IPV6SUPP=y OPENVPN=y USERPPTP=y NO_LIBOPT=y B=J BUILD_DESC="MiniIPv6-VPN" USB="" VLAN="$(VLAN)" SNMP="$(SNMP)"
 875 endif
 876
 877 ## Make the "normal with Extras and NTFS" build
 878 m:
 879 ifeq ($(CONFIG_LINUX26),y)
 880         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y USERPPTP=y  PPTPD=y DNSCRYPT=y TCPDUMP="$(TCPDUMP)"
 881 else
 882         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y USERPPTP=y PPTPD=y DNSCRYPT=y TCPDUMP="$(TCPDUMP)"
 883 endif
 884
 885 ## Roadkill
 886 ## Make the "VLAN + VPN + NOCAT + USB (Change switch) + NGINX (add option)" build
 887 nc:
 888 ifeq ($(CONFIG_LINUX26),y)
 889         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y DNSCRYPT=y B=NC USB="USB" SNMP=y VLAN=y NOCAT=y TCPDUMP="$(TCPDUMP)"
 890 else
 891         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y DNSCRYPT=y B=NC BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" NOCAT=y TCPDUMP="$(TCPDUMP)" BUILD_DESC+=" $(NC)"
 892 endif
 893
 894 ## Toastman
 895 ## Make the "Mini: no USB, + NOCAT" build - for 4MB routers
 896 ncm:
 897         @$(MAKE) bin JFFSv1=y NOCAT=y B=NCM BUILD_DESC="Mini-NOCAT" USB="" VLAN="$(VLAN)"
 898
 899 ## Toastman
 900 ## Make the "normal" build + NOCAT
 901 ncs:
 902         @$(MAKE) bin NOCAT=y B=NCS BUILD_DESC="Std-NOCAT" USB="USB" SNMP=y VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 903
 904
 905 ## Make the "No USB" build
 906 s:
 907 ifeq ($(CONFIG_LINUX26),y)
 908         @$(MAKE) bin JFFSv1=y $(if $(filter r2, $(MIPS32)),,BCM57=y) B=S BUILD_DESC="Std" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 909 else
 910         @$(MAKE) bin BBEXTRAS=y BCM57=y B=S BUILD_DESC="Std" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 911 endif
 912
 913
 914 ## Make the "No USB with Extras" build (K26 only, for 8MB flash)
 915 ifeq ($(CONFIG_LINUX26),y)
 916 t:
 917         @$(MAKE) bin B=T USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y BUILD_DESC="Std" SNMP=y VLAN="$(VLAN)"
 918 ## Make the "No USB with OpenVPN and Extras" build (K26 only, for 8MB flash)
 919 u:
 920         @$(MAKE) bin B=U USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y OPENVPN=y USERPPTP=y BUILD_DESC="$(VPN)"  SNMP=y VLAN="$(VLAN)"
 921 endif
 922
 923 ## Make the "VPN with no USB support" build
 924 v:
 925 ifeq ($(CONFIG_LINUX26),y)
 926         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)" TCPDUMP="$(TCPDUMP)"
 927 else
 928         @$(MAKE) bin OPENVPN=y PPTPD=y BBEXTRAS=y B=V BUILD_DESC="$(VPN)" USB=""  SNMP=y VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)" TCPDUMP="$(TCPDUMP)"
 929 endif
 930
 931 ## Make the "Small VPN with no USB support" build
 932 vs:
 933 ifeq ($(CONFIG_LINUX26),y)
 934         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y NO_CIFS=y B=VS BUILD_DESC="SmallVPN" USB=""
 935 else
 936         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y NO_CIFS=y BCM57=y B=VS BUILD_DESC="SmallVPN" USB=""
 937 endif
 938
 939
 940 ## Make Mips32r2 builds
 941
 942 r2a:
 943         @$(MAKE) a MIPS32=r2
 944
 945 r2b:
 946         @$(MAKE) b MIPS32=r2
 947
 948 r2c:
 949         @$(MAKE) c MIPS32=r2
 950
 951 r2d:
 952         @$(MAKE) d MIPS32=r2
 953
 954 r2e:
 955         @$(MAKE) e MIPS32=r2
 956
 957 r2f:
 958         @$(MAKE) f MIPS32=r2
 959
 960 r2fb:
 961         @$(MAKE) f MIPS32=r2 BELKIN=y
 962
 963 r2fs:
 964         @$(MAKE) fs MIPS32=r2
 965
 966 r2i:
 967         @$(MAKE) i MIPS32=r2
 968
 969 r2j:
 970         @$(MAKE) j MIPS32=r2
 971
 972 r2m:
 973         @$(MAKE) m MIPS32=r2
 974
 975 r2n:
 976         @$(MAKE) n MIPS32=r2
 977
 978 r2nc:
 979         @$(MAKE) nc MIPS32=r2
 980
 981 r2r:
 982         @$(MAKE) r MIPS32=r2
 983
 984 r2s:
 985         @$(MAKE) s MIPS32=r2
 986
 987 r2t:
 988         @$(MAKE) t MIPS32=r2
 989
 990 r2u:
 991         @$(MAKE) t MIPS32=r2
 992
 993 r2v:
 994         @$(MAKE) v MIPS32=r2
 995
 996 r2vs:
 997         @$(MAKE) vs MIPS32=r2
 998
 999 #Linksys E-Series with 60K Nvram Builds
1000
1001 n60a:
1002         @$(MAKE) r2a NVRAM_SIZE=60 LINKSYS_E=y
1003
1004 n60b:
1005         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=y
1006
1007 n60c:
1008         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=y
1009
1010 n60e:
1011         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=y
1012
1013 n60m:
1014         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=y
1015
1016 n60n:
1017         @$(MAKE) r2n NVRAM_SIZE=60 LINKSYS_E=y
1018
1019 n60nc:
1020         @$(MAKE) r2nc NVRAM_SIZE=60 LINKSYS_E=y
1021
1022 n60o:
1023         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=y
1024
1025 n60r:
1026         @$(MAKE) r2r NVRAM_SIZE=60 LINKSYS_E=y
1027
1028 n60s:
1029         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
1030
1031 n60v:
1032         @$(MAKE) r2v NVRAM_SIZE=60 LINKSYS_E=y
1033
1034
1035 #Linksys E-Series with 64K Nvram Builds
1036
1037 n64a:
1038         @$(MAKE) r2a NVRAM_SIZE=64 LINKSYS_E_64=y
1039
1040 n64b:
1041         @$(MAKE) r2b NVRAM_SIZE=64 LINKSYS_E_64=y
1042
1043 n64c:
1044         @$(MAKE) r2c NVRAM_SIZE=64 LINKSYS_E_64=y
1045
1046 n64e:
1047         @$(MAKE) r2e NVRAM_SIZE=64 LINKSYS_E_64=y
1048
1049 n64m:
1050         @$(MAKE) r2m NVRAM_SIZE=64 LINKSYS_E_64=y
1051
1052 n64n:
1053         @$(MAKE) r2n NVRAM_SIZE=64 LINKSYS_E_64=y
1054
1055 n64nc:
1056         @$(MAKE) r2nc NVRAM_SIZE=64 LINKSYS_E_64=y
1057
1058 n64o:
1059         @$(MAKE) r2o NVRAM_SIZE=64 LINKSYS_E_64=y
1060
1061 n64r:
1062         @$(MAKE) r2r NVRAM_SIZE=64 LINKSYS_E_64=y
1063
1064 n64s:
1065         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=64 LINKSYS_E_64=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
1066
1067 n64v:
1068         @$(MAKE) r2v NVRAM_SIZE=64 LINKSYS_E_64=y
1069
1070
1071 #Linksys E-Series with 4MB Flash
1072
1073 e1000v2i:
1074         @$(MAKE) r2i NVRAM_SIZE=32 LINKSYS_E1000v2=y
1075
1076 e1000v2f:
1077         @$(MAKE) r2f NVRAM_SIZE=32 LINKSYS_E1000v2=y
1078
1079 e1200v1i:
1080         @$(MAKE) r2i NVRAM_SIZE=64 LINKSYS_E1200v1=y
1081
1082 e1200v1f:
1083         @$(MAKE) r2f NVRAM_SIZE=64 LINKSYS_E1200v1=y
1084
1085
1086 #Builds for WNR3500L v2
1087
1088 v2e:
1089         @$(MAKE) e MIPS32=r2 WNR3500LV2=y NO_JFFS=y
1090
1091 rtn53:
1092         @$(MAKE) bin MIPS32=r2 OPENVPN=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y B=E BUILD_DESC="RT-N53" SNMP=y NOCAT=y VLAN=y PPTPD=y NOCAT=y USBAP=y NO_USBAPP=y
1093
1094 e2500:
1095         @$(MAKE) bin MIPS32=r2 OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y NO_LIBOPT=y VLAN=y EBTABLES=y IPV6SUPP=y SNMP=y NOCAT=y NGINX=n USBAP=y NO_USBAPP=y NVRAM_SIZE=60 BUILD_DESC+="-$(VLAN)" BUILD_DESC="$(VPN)" BUILD_DESC+="-$(NC)" LINKSYS_E2500=y
1096
1097 e3200:
1098         @$(MAKE) bin MIPS32=r2 OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y USB="USB" NOCAT=y BBEXTRAS=y SNMP=y DNSCRYPT=y USERPPTP=y PPTPD=y NGINX=y VLAN=y USBAP=y NO_USBAPP=y NVRAM_SIZE=60 LINKSYS_E3200=y
1099
1100 ac66e:
1101         @$(MAKE) e MIPS32=r2 NVRAM_64K=y NAND=y AC66U=1 NO_JFFS=y
1102
1103 w1800rz:
1104         @$(MAKE) z MIPS32=r2 NVRAM_64K=y W1800R=1
1105
1106 l600n:
1107         @$(MAKE) bin MIPS32=r2 OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=NC BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" SNMP=y NOCAT=y USBAP=y B=NC BUILD_DESC+="-$(NC)"  BUILD_DESC+="$(L600N)"
1108
1109 setprofile:
1110         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
1111         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
1112         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
1113         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
1114         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
1115         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
1116         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
1117         echo '#define TOMATO_BUILD_DESC "$(EXTRA_PREDESC)$(DESC)$(EXTRA_POSTDESC)"' >> router/shared/tomato_profile.h
1118         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
1119         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
1120         echo '#endif' >> router/shared/tomato_profile.h
1121         echo '#endif' >> router/shared/tomato_profile.h
1122
1123         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
1124         echo 'PROFILE_G = 1' >> tomato_profile.mak
1125         echo 'PROFILE_N = 2' >> tomato_profile.mak
1126         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
1127         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
1128         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
1129         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
1130         echo 'TOMATO_BUILD_DESC = "$(EXTRA_PREDESC)$(DESC)$(EXTRA_POSTDESC)"' >> tomato_profile.mak
1131         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
1132         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
1133         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
1134         echo 'TOMATO_BUILD_MIPS32 = "${MIPS32}"' >> tomato_profile.mak
1135         echo 'TOMATO_BUILD_V1 = "${V1}"' >> tomato_profile.mak
1136         echo 'TOMATO_BUILD_V2 = "${V2}"' >> tomato_profile.mak
1137
1138         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE)) $(EXTRA_64KCFLAG)' >> tomato_profile.mak
1139
1140 # Note that changes to variables in tomato_profile.mak don't
1141 # get propogated to this invocation of make!
1142         @echo ""
1143         @echo "Using $(N) profile, $(B) build config."
1144         @echo ""
1145
1146         @cd $(LINUXDIR) ; \
1147                 rm -f config_current ; \
1148                 ln -s config_$(lowercase_B) config_current ; \
1149                 cp -f config_current .config
1150
1151         @cd router/busybox && \
1152                 rm -f config_current ; \
1153                 ln -s config_$(lowercase_B) config_current ; \
1154                 cp config_current .config
1155
1156         @cd router ; \
1157                 rm -f config_current ; \
1158                 ln -s config_$(lowercase_B) config_current ; \
1159                 cp config_current .config
1160
1161         @$(MAKE) -C router oldconfig
1162
1163 help:
1164         @echo "a            A build (standard)"
1165         @echo "b            B build (standard minus SSH)"
1166         @echo "c            C build (standard minus CIFS)"
1167         @echo "d            D build (standard minus Samba server)"
1168         @echo "m            M build (standard plus extra utilities and NTFS support)"
1169         @echo "nc           NC build (standard plus VPN, extra utilities, NTFS support and NOCAT)"
1170         @echo "ncm          NCS build (no USB support, NOCAT)"
1171         @echo "ncs          NCS build (std + NOCAT)"
1172         @echo "m            Ext - (standard plus extra utilities and NTFS support)"
1173
1174 ifeq ($(CONFIG_LINUX26),y)
1175         @echo "e            E build (standard plus VPN, extra utilities and NTFS support)"
1176         @echo "i            I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
1177 else
1178         @echo "e            E build (standard plus VPN and NTFS support)"
1179 endif
1180         @echo "s            S build (no USB support)"
1181         @echo "f            F build (no USB support minus CIFS and RIPv1/2)"
1182         @echo "fs           FS build (no USB support minus CIFS, JFFS, Zebra and RIPv1/2)"
1183         @echo "v            V build (VPN with no USB support)"
1184         @echo "vs           VS build (Small VPN with no USB support)"
1185
1186 ifeq ($(CONFIG_LINUX26),y)
1187         @echo "r2a          MIPS Release 2 A build (standard)"
1188         @echo "r2b          MIPS Release 2 B build (standard minus SSH)"
1189         @echo "r2c          MIPS Release 2 C build (standard minus CIFS)"
1190         @echo "r2d          MIPS Release 2 D build (standard minus Samba server)"
1191         @echo "r2e          MIPS Release 2 E build (standard plus VPN and extras)"
1192         @echo "r2f          MIPS Release 2 F build (no USB support minus CIFS, RIPv1/2)"
1193         @echo "r2fs         MIPS Release 2 FS build (no USB support minus JFFS, CIFS, RIPv1/2, Zebra)"
1194         @echo "r2i          MIPS Release 2 I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
1195         @echo "r2m          MIPS Release 2 M build (standard plus extras)"
1196         @echo "r2nc         MIPS Release 2 NC build (standard plus VPN, extras and NOCAT)"
1197         @echo "r2ncm        MIPS Release 2 NCM build (no USB support, plus NOCAT)"
1198         @echo "r2ncs        MIPS Release 2 NCS build (standard plus NOCAT)"
1199         @echo "r2s          MIPS Release 2 S build (no USB support)"
1200         @echo "r2t          MIPS Release 2 T build (no USB support with extras)"
1201         @echo "r2u          MIPS Release 2 U build (no USB support plus VPN with extras)"
1202         @echo "r2v          MIPS Release 2 V build (VPN with no USB support)"
1203         @echo "r2vs         MIPS Release 2 VS build (Small VPN with no USB support)"
1204
1205         @echo "       Linksys E-Series with 60k Nvram"
1206         @echo "n60m         Linksys E-series build (60KB NVRAM, standard plus extras)"
1207         @echo "n60e         Linksys E-series build (60KB NVRAM, standard plus VPN and extras)"
1208         @echo "n60nc        Linksys E-series build (60KB NVRAM, standard plus extras, plus VPN, plus NOCAT)"
1209         @echo "n60s         Linksys E-series build (60KB NVRAM, no USB support)"
1210         @echo "n60v         Linksys E-series build (60KB NVRAM, VPN with no USB support)"
1211
1212         @echo "       Linksys E-Series with 64k Nvram/8MB Flash(E800/E900/E1200v2/E1500)"
1213         @echo "n64m         Linksys E-series build (64KB NVRAM, standard plus extras)"
1214         @echo "n64e         Linksys E-series build (64KB NVRAM, standard plus VPN and extras)"
1215         @echo "n64nc        Linksys E-series build (64KB NVRAM, standard plus extras, plus VPN, plus NOCAT)"
1216         @echo "n64s         Linksys E-series build (64KB NVRAM, no USB support)"
1217         @echo "n64v         Linksys E-series build (64KB NVRAM, VPN with no USB support)"
1218
1219         @echo "       Linksys E-Series with 4MB Flash(E1000v2/v2.1/E1200v1)"
1220         @echo "e1000v2i     Linksys E1000v2-v2.1/Cisco M10v2 MiniIPv6"
1221         @echo "e1000v2f     Linksys E1000v2-v2.1/Cisco M10v2 Mini"
1222         @echo "e1200v1i     Linksys E1200v1 MiniIPv6"
1223         @echo "e1200v1f     Linksys E1200v1 Mini"
1224         @echo "       Netgear WNR3500L v2 builds (128MB Flash)"
1225         @echo "v2e          Netgear WNR3500Lv2 build"
1226         @echo "       Routers with wl_high module"
1227         @echo "rtn53    Asus RT-N53 with wl_high module (dualband support)"
1228         @echo "e2500    Linksys E2500 with wl_high module (dualband support)"
1229         @echo "e3200    Linksys E3200 with wl_high module (dualband support)"
1230         @echo "l600n    Rosewill L600N Build with wl_high module (dualband support)"
1231         @echo "       Routers with AC WIRELESS"
1232         @echo "ac66e    ASUS RT-AC66"
1233         @ECHO "ac56     ASUS RT-AC56"
1234         @echo "w1800rz  Tenda 1800"
1235
1236 endif
1237         @echo "..etc..      other build configs"
1238         @echo "clean        -C router clean"
1239         @echo "cleanimage   rm -rf image"
1240         @echo "cleantools   clean btools, mksquashfs"
1241         @echo "cleankernel  -C Linux distclean (but preserves .config)"
1242         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
1243         @echo "prepk        -C Linux oldconfig dep"
1244
1245 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
1246 .PHONY: a b c d m Makefile allversions tomato_profile.mak
1247
1248