release/src/Makefile

   1
   2 #
   3 # Toplevel Makefile for the BCM947xx Linux Router release
   4 #
   5 # Copyright 2005, Broadcom Corporation
   6 # All Rights Reserved.
   7 #
   8 # THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   9 # KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
  10 # SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  11 # FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  12 #
  13 # $Id: Makefile,v 1.53 2005/04/25 03:54:37 tallest Exp $
  14 #
  15
  16 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  17
  18 # To rebuild everything and all configurations:
  19 #  make distclean
  20 #  make V1=whatever V2=sub-whatever VPN=vpn3.6 a b c d m n
  21 # The 1st "whatever" would be the build number, the sub-whatever would
  22 #       be the update to the version.
  23 #
  24 # Example:
  25 # make V1=8516 V2="-jffs.1" a b c d m s
  26
  27 # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  28
  29
  30 export ac_cv_func_malloc_0_nonnull=yes
  31 export SRCBASE := $(shell pwd)
  32 RELEASEDIR := $(shell (cd $(SRCBASE)/.. && pwd -P))
  33 PATH := $(RELEASEDIR)/tools:$(PATH)
  34 export TPROFILE := N
  35
  36 include ./target.mak
  37
  38 # Normally you'd do something like "make V1=8516 V2=-sub-ver a b c d"
  39 # But if you don't give anything for "V1", it'll get a default from tomato_version.
  40 current_TOMATO_V1 ?= "--def"
  41 VPN ?= "VPN"
  42 NC ?="NOCAT"
  43 NG ?="NGINX"
  44 ifeq ($(CONFIG_LINUX26),y)
  45 ND = "K26"
  46 else
  47 ND = "ND"
  48 endif
  49 SNMP ?= "n"
  50 VLAN ?= "n"
  51 USERPPTP ?= "n"
  52 PPTPD ?= "n"
  53 TCPDUMP ?= "n"
  54 DNSCRYPT ?= "n"
  55
  56 ifeq ($(NVRAM_SIZE),)
  57 NVRAM_SIZE = 0
  58 else
  59 EXTRA_PREDESC = ''
  60 endif
  61
  62 ifeq ($(VLAN),y)
  63 EXTRA_PREDESC = 'VLAN-'
  64 else
  65 EXTRA_PREDESC = ''
  66 endif
  67
  68 ifeq ($(NVRAM_64K),y)
  69 EXTRA_POSTDESC = ' -64K'
  70 EXTRA_64KCFLAG = '-DTCONFIG_NVRAM_64K'
  71 else
  72 EXTRA_POSTDESC = ''
  73 EXTRA_64KCFLAG = ''
  74 endif
  75
  76 ifeq ($(WNR3500LV2),)
  77 WNR3500LV2 = 0
  78 else
  79 WNRTOOL=$(SRCBASE)/wnrtool
  80 BOARD_FILE=$(WNRTOOL)/compatible_WNR3500Lv2.txt
  81 fw_cfg_file := $(WNRTOOL)/ambitCfg.h
  82 endif
  83
  84 -include tomato_profile.mak
  85
  86 # This could be simpler by just using $(TOMATO_PROFILE_NAME) like it used to be,
  87 # but that's fragile.  If you make one certain innocuous change elsewhere in the
  88 # makefile(s), the build will silently be wrong.  This way it works properly every time.
  89 current_BUILD_NAME = $(strip $(shell grep "^TOMATO_BUILD_NAME" tomato_profile.mak  | cut -d"=" -f2))
  90 current_BUILD_DESC = $(strip $(shell grep "^TOMATO_BUILD_DESC" tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  91 current_BUILD_USB  = $(strip $(shell grep "^TOMATO_BUILD_USB"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g"))
  92 current_TOMATO_VER = $(strip $(shell grep "TOMATO_MAJOR" router/shared/tomato_version.h  | cut -d"\"" -f2)).$(strip $(shell grep "TOMATO_MINOR" router/shared/tomato_version.h  | cut -d"\"" -f2))
  93 current_TOMATO_MIPS32 = $(strip $(shell grep "^TOMATO_BUILD_MIPS32"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  94 current_TOMATO_V1 = $(strip $(shell grep "^TOMATO_BUILD_V1"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  95 current_TOMATO_V2 = $(strip $(shell grep "^TOMATO_BUILD_V2"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  96 current_TOMATO_B = $(strip $(shell grep "^TOMATO_BUILD_NAME"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  97 current_TOMATO_N = $(strip $(shell grep "^TOMATO_PROFILE_NAME"  tomato_profile.mak  | cut -d"=" -f2 | sed -e "s/ //g" | sed -e "s/\"//g" ))
  98 N=$(current_TOMATO_N)
  99 B=$(current_TOMATO_B)
 100
 101 uppercase_N = $(shell echo $(N) | tr a-z  A-Z)
 102 lowercase_N = $(shell echo $(N) | tr A-Z a-z)
 103 uppercase_B = $(shell echo $(B) | tr a-z  A-Z)
 104 lowercase_B = $(shell echo $(B) | tr A-Z a-z)
 105
 106 ifeq ($(CONFIG_LINUX26),y)
 107 mips_rev = $(if $(filter $(current_TOMATO_MIPS32),r2),MIPSR2,MIPSR1)
 108
 109 KERN_SIZE_OPT ?= n
 110 else
 111 mips_rev =
 112 KERN_SIZE_OPT ?= y
 113 endif
 114
 115 beta = $(if $(filter $(TOMATO_EXPERIMENTAL),1),-beta,)
 116
 117 tomato_ver:
 118         @echo ""
 119         @btools/uversion.pl --gen $(current_TOMATO_V1) $(mips_rev)$(beta)$(current_TOMATO_V2) $(ND) $(current_BUILD_USB) $(current_BUILD_DESC)
 120
 121 ifeq ($(TOMATO_BUILD),)
 122
 123 all:
 124         $(MAKE) a
 125
 126 else
 127
 128 all: tomato_ver
 129         @echo ""
 130         @echo "Building Tomato $(ND) $(current_BUILD_USB) $(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2) $(current_BUILD_DESC) $(current_BUILD_NAME) with $(TOMATO_PROFILE_NAME) Profile"
 131
 132         @echo ""
 133         @echo ""
 134
 135         @-mkdir image
 136         @$(MAKE) -C router all
 137         @$(MAKE) -C router install
 138         @$(MAKE) -C btools
 139
 140         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).trx
 141         @rm -f image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 142
 143 ifeq ($(WNR3500LV2),y)
 144         @echo "Creating Firmware for Netgear WNR3500L v2 .... "
 145         mipsel-uclibc-objcopy -O binary -g $(LINUXDIR)/vmlinux image/vmlinux.bin
 146         $(WNRTOOL)/lzma e image/vmlinux.bin image/vmlinux.lzma
 147         $(WNRTOOL)/trx -o image/tomato-wnr3500lv2.trx image/vmlinux.lzma $(SRCBASE)/router/mipsel-uclibc/target.image
 148         rm -f image/vmlinux.bin image/vmlinux.lzma
 149         cd image && touch rootfs
 150         cd image && $(WNRTOOL)/packet -k tomato-wnr3500lv2.trx -f rootfs -b $(BOARD_FILE) -ok kernel_image -oall kernel_rootfs_image -or rootfs_image -i $(fw_cfg_file) && rm -f rootfs && \
 151         cp kernel_rootfs_image.chk tomato-Netgear-3500Lv2-$(ND)$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(current_TOMATO_V2)-$(current_BUILD_DESC).chk
 152         @echo "Cleanup ...."
 153         rm -f image/*image.chk image/*.trx
 154 endif
 155
 156 ifeq ($(WRT54),y)
 157 ifneq ($(current_TOMATO_MIPS32),r2)
 158         @rm -f image/tomato-WRT54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 159         @rm -f image/tomato-WRTSL54*$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 160         @rm -f image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 161 endif
 162 endif
 163 ifeq ($(LINKSYS_E),y)
 164         @rm -f image/tomato-E??????$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 165 endif
 166 ifeq ($(LINKSYS_E_64k),y)
 167         @rm -f image/tomato-E??????$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 168 endif
 169 ifeq ($(LINKSYS_E1200v1),y)
 170         @rm -f image/tomato-E1200v1$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 171 endif
 172 ifeq ($(LINKSYS_E1000v2),y)
 173         @rm -f image/tomato-E1000v2-v21$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 174         @rm -f image/tomato-Cisco-M10v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin
 175 endif
 176 ifeq ($(BELKIN),y)
 177 ifneq ($(NVRAM_SIZE),60)
 178         @rm -f image/tomato-F7D????$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 179         @rm -f image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin
 180 endif
 181 endif
 182         @echo "" >>fpkg.log
 183         @echo "***********************" `date` "************************" >>fpkg.log
 184         @cat router/shared/tomato_version >>fpkg.log
 185         @echo "" >>fpkg.log
 186         @cat router/target.info >>fpkg.log
 187 ifeq ($(WRT54),y)
 188 ifneq ($(current_TOMATO_MIPS32),r2)
 189         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 190                 -l W54G,image/tomato-WRT54G_WRT54GL$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 191                 -l W54S,image/tomato-WRT54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 192                 -l W54s,image/tomato-WRT54GSv4$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 193                 -l W54U,image/tomato-WRTSL54GS$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 194                 -m 0x10577050,image/tomato-WR850G$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 195                 | tee -a fpkg.log
 196 endif
 197 endif
 198 ifeq ($(LINKSYS_E),y)
 199         # Linksys E-series(60k Nvram) images
 200         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 201                 -l 1550,image/tomato-E1550$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 202                 -l 4200,image/tomato-E4200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 203                 -l 61XN,image/tomato-E3000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 204                 -l 32XN,image/tomato-E2000$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 205                 | tee -a fpkg.log
 206 endif
 207 ifeq ($(LINKSYS_E2500),y)
 208         # Linksys E2500(60k Nvram) image
 209         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 210                 -l E25X,image/tomato-E2500$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 211                 | tee -a fpkg.log
 212 endif
 213 ifeq ($(LINKSYS_E3200),y)
 214         # Linksys E3200(60k Nvram) image
 215         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 216                 -l E3200,image/tomato-E3200$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 217                 | tee -a fpkg.log
 218 endif
 219 ifeq ($(LINKSYS_E_64k),y)
 220         # Linksys E-series(64k Nvram) images
 221         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 222                 -l E900,image/tomato-E900$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 223                 -l E122,image/tomato-E1200v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 224                 -l E150,image/tomato-E1500$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 225                 | tee -a fpkg.log
 226 endif
 227 ifeq ($(LINKSYS_E1000v2),y)
 228         # Linksys E1000v2/v2.1 images
 229         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 230                 -l E100,image/tomato-E1000v2-v21$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 231                 -l M010,image/tomato-Cisco-M10v2$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 232                 | tee -a fpkg.log
 233 endif
 234 ifeq ($(LINKSYS_E1200v1),y)
 235         # Linksys E1200v1 images
 236         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 237                 -l E120,image/tomato-E1200v1$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(V1)$(mips_rev)$(beta)$(V2)-$(current_BUILD_DESC).bin \
 238                 | tee -a fpkg.log
 239 endif
 240 ifeq ($(BELKIN),y)
 241 ifneq ($(NVRAM_SIZE),60)
 242         # Create Belkin images
 243         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 244                 -b 0x20100322,image/tomato-F7D3301$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 245                 -b 0x20090928,image/tomato-F7D3302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 246                 -b 0x20091006,image/tomato-F7D4302$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 247                 -b 0x00017116,image/tomato-F5D8235v3$(current_BUILD_USB)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).bin \
 248                 | tee -a fpkg.log
 249 endif
 250 endif
 251         # Create generic TRX image
 252         @btools/fpkg -i lzma-loader/loader.gz -i $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz -a 1024 -i router/mipsel-uclibc/target.image \
 253                 -t image/tomato-$(ND)$(current_BUILD_USB)$(if $(filter $(NVRAM_SIZE),0),,-NVRAM$(NVRAM_SIZE)K)-$(current_TOMATO_VER).$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2)-$(current_BUILD_DESC).trx \
 254                 | tee -a fpkg.log
 255
 256         @cp fpkg.log image/fpkg-$(current_TOMATO_V1)$(mips_rev)$(beta)$(current_TOMATO_V2).log
 257         @echo ""
 258         @echo "-----------------"
 259         @echo `cat router/shared/tomato_version` " ready"
 260         @echo "-----------------"
 261 ifneq ($(NOVERSION),1)
 262         @cp router/shared/tomato_version router/shared/tomato_version_last
 263         @btools/uversion.pl --bump
 264 endif
 265 endif
 266
 267
 268
 269 clean:
 270         @touch router/.config
 271         @rm -f router/config_[a-z]
 272         @rm -f router/busybox/config_[a-z]
 273         @$(MAKE) -C router $@
 274         @-rmdir router/mipsel-uclibc
 275
 276 cleanimage:
 277         @rm -f fpkg.log
 278         @rm -fr image/*
 279         @rm -f router/.config
 280         @touch router/.config
 281         @-mkdir image
 282
 283 cleantools:
 284         @$(MAKE) -C $(LINUXDIR)/scripts/squashfs clean
 285         @$(MAKE) -C btools clean
 286
 287 cleankernel:
 288         @cd $(LINUXDIR) && \
 289         mv .config save-config && \
 290         $(MAKE) distclean || true; \
 291         cp -p save-config .config || true
 292
 293 kernel:
 294         @$(MAKE) -C router kernel
 295         @ls -l $(LINUXDIR)/arch/mips/brcm-boards/bcm947xx/compressed/zImage
 296
 297 distclean: clean cleanimage cleankernel cleantools
 298 ifneq ($(INSIDE_MAK),1)
 299         @$(MAKE) -C router $@ INSIDE_MAK=1
 300 endif
 301         mv router/busybox/.config busybox-saved-config || true
 302         @$(MAKE) -C router/busybox distclean
 303         @rm -f router/busybox/config_current
 304         @cp -p busybox-saved-config router/busybox/.config || true
 305         @cp -p router/busybox/.config  router/busybox/config_current || true
 306         @rm -f router/config_current
 307         @rm -f router/.config.cmd router/.config.old router/.config
 308         @rm -f router/libfoo_xref.txt
 309         @rm -f tomato_profile.mak router/shared/tomato_profile.h
 310         @touch tomato_profile.mak
 311         @touch router/shared/tomato_profile.h
 312
 313
 314 prepk:
 315         @cd $(LINUXDIR) ; \
 316                 rm -f config_current ; \
 317                 ln -s config_base config_current ; \
 318                 cp -f config_current .config
 319         $(MAKE) -C $(LINUXDIR) oldconfig
 320 ifneq ($(CONFIG_LINUX26),y)
 321         $(MAKE) -C $(LINUXDIR) dep
 322 endif
 323
 324 what:
 325         @echo ""
 326         @echo "$(current_BUILD_DESC)-$(current_BUILD_NAME)-$(TOMATO_PROFILE_NAME) Profile"
 327         @echo ""
 328
 329
 330 # The methodology for making the different builds is to
 331 # copy the "base" config file to the "target" config file in
 332 # the appropriate directory, and then edit it by removing and
 333 # inserting the desired configuration lines.
 334 # You can't just delete the "whatever=y" line, you must have
 335 # a "...is not set" line, or the make oldconfig will stop and ask
 336 # what to do.
 337
 338 # Options for "make bin" :
 339 # BUILD_DESC (Std|Lite|Ext|...)
 340 # MIPS32 (r2|r1)
 341 # WNR3500LV2 (0|1)
 342 # KERN_SIZE_OPT
 343 # USB ("USB"|"")
 344 # JFFSv1 | NO_JFFS
 345 # NO_CIFS, NO_SSH, NO_ZEBRA, NO_SAMBA, NO_HTTPS, NO_XXTP, NO_LIBOPT, NO_FTP
 346 # SAMBA3, OPENVPN, IPV6SUPP, EBTABLES, NTFS, MEDIASRV, BBEXTRAS, USBEXTRAS, BCM57, SLIM
 347 # NOCAT, SNMP, USERPPTP, VLAN, USBAP, NO_USBAPP, NGINX, DNSCRYPT
 348
 349 define RouterOptions
 350         @( \
 351         if [ "$(CONFIG_LINUX26)" = "y" ] || [ "$(SAMBA3)" = "y" ]; then \
 352                 sed -i "/TCONFIG_SAMBA3/d" $(1); \
 353                 echo "TCONFIG_SAMBA3=y" >>$(1); \
 354         fi; \
 355         sed -i "/TCONFIG_EMF/d" $(1); \
 356         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 357                 if [ "$(SLIM)" = "y" ]; then \
 358                         echo "# TCONFIG_EMF is not set" >>$(1); \
 359                 else \
 360                         echo "TCONFIG_EMF=y" >>$(1); \
 361                 fi; \
 362         else \
 363                 echo "# TCONFIG_EMF is not set" >>$(1); \
 364         fi; \
 365         sed -i "/TCONFIG_JFFSV1/d" $(1); \
 366         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 367                 if [ "$(JFFSv1)" = "y" ]; then \
 368                         echo "TCONFIG_JFFSV1=y" >>$(1); \
 369                 else \
 370                         echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 371                 fi; \
 372         else \
 373                 echo "TCONFIG_JFFSV1=y" >>$(1); \
 374         fi; \
 375         if [ "$(USB)" = "USB" ]; then \
 376                 sed -i "/TCONFIG_USB is not set/d" $(1); \
 377                 echo "TCONFIG_USB=y" >>$(1); \
 378                 if [ "$(USBEXTRAS)" = "y" ]; then \
 379                         sed -i "/TCONFIG_USB_EXTRAS/d" $(1); \
 380                         echo "TCONFIG_USB_EXTRAS=y" >>$(1); \
 381                 fi; \
 382                 if [ "$(NTFS)" = "y" ]; then \
 383                         sed -i "/TCONFIG_NTFS/d" $(1); \
 384                         echo "TCONFIG_NTFS=y" >>$(1); \
 385                 fi; \
 386                 if [ "$(MEDIASRV)" = "y" ]; then \
 387                         sed -i "/TCONFIG_MEDIA_SERVER/d" $(1); \
 388                         echo "TCONFIG_MEDIA_SERVER=y" >>$(1); \
 389                 fi; \
 390         else \
 391                 sed -i "/TCONFIG_USB=y/d" $(1); \
 392                 echo "# TCONFIG_USB is not set" >>$(1); \
 393         fi; \
 394         if [ "$(NO_SAMBA)" = "y" ]; then \
 395                 sed -i "/TCONFIG_SAMBASRV/d" $(1); \
 396                 echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 397         fi; \
 398         if [ "$(NO_ZEBRA)" = "y" ]; then \
 399                 sed -i "/TCONFIG_ZEBRA/d" $(1); \
 400                 echo "# TCONFIG_ZEBRA is not set" >>$(1); \
 401         fi; \
 402         if [ "$(NO_JFFS)" = "y" ]; then \
 403                 sed -i "/TCONFIG_JFFS2/d" $(1); \
 404                 echo "# TCONFIG_JFFS2 is not set" >>$(1); \
 405                 sed -i "/TCONFIG_JFFSV1/d" $(1); \
 406                 echo "# TCONFIG_JFFSV1 is not set" >>$(1); \
 407         fi; \
 408         if [ "$(NO_CIFS)" = "y" ]; then \
 409                 sed -i "/TCONFIG_CIFS/d" $(1); \
 410                 echo "# TCONFIG_CIFS is not set" >>$(1); \
 411         fi; \
 412         if [ "$(NO_FTP)" = "y" ]; then \
 413                 sed -i "/TCONFIG_FTP/d" $(1); \
 414                 echo "# TCONFIG_FTP is not set" >>$(1); \
 415         fi; \
 416         if [ "$(NO_SSH)" = "y" ]; then \
 417                 sed -i "/TCONFIG_SSH/d" $(1); \
 418                 echo "# TCONFIG_SSH is not set" >>$(1); \
 419         fi; \
 420         if [ "$(NO_HTTPS)" = "y" ]; then \
 421                 sed -i "/TCONFIG_HTTPS/d" $(1); \
 422                 echo "# TCONFIG_HTTPS is not set" >>$(1); \
 423         fi; \
 424         if [ "$(NO_XXTP)" = "y" ]; then \
 425                 sed -i "/TCONFIG_L2TP/d" $(1); \
 426                 echo "# TCONFIG_L2TP is not set" >>$(1); \
 427                 sed -i "/TCONFIG_PPTP/d" $(1); \
 428                 echo "# TCONFIG_PPTP is not set" >>$(1); \
 429         fi; \
 430         if [ "$(NO_LIBOPT)" = "y" ]; then \
 431                 sed -i "/TCONFIG_OPTIMIZE_SHARED_LIBS/d" $(1); \
 432                 echo "# TCONFIG_OPTIMIZE_SHARED_LIBS is not set" >>$(1); \
 433         fi; \
 434         if [ "$(EBTABLES)" = "y" ]; then \
 435                 sed -i "/TCONFIG_EBTABLES/d" $(1); \
 436                 echo "TCONFIG_EBTABLES=y" >>$(1); \
 437         fi; \
 438         if [ "$(IPV6SUPP)" = "y" ]; then \
 439                 sed -i "/TCONFIG_IPV6/d" $(1); \
 440                 echo "TCONFIG_IPV6=y" >>$(1); \
 441         fi; \
 442         if [ "$(NOCAT)" = "y" ]; then \
 443                 sed -i "/TCONFIG_NOCAT/d" $(1); \
 444                 echo "TCONFIG_NOCAT=y" >>$(1); \
 445         fi; \
 446         if [ "$(NGINX)" = "y" ]; then \
 447                 sed -i "/TCONFIG_NGINX/d" $(1); \
 448                 sed -i "/TCONFIG_ZLIB/d" $(1); \
 449                 echo "TCONFIG_NGINX=y" >>$(1); \
 450                 echo "TCONFIG_ZLIB=y" >>$(1); \
 451         fi; \
 452         if [ "$(OPENVPN)" = "y" ]; then \
 453                 sed -i "/TCONFIG_LZO/d" $(1); \
 454                 echo "TCONFIG_LZO=y" >>$(1); \
 455                 sed -i "/TCONFIG_OPENVPN/d" $(1); \
 456                 echo "TCONFIG_OPENVPN=y" >>$(1); \
 457                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 458                         sed -i "/TCONFIG_FTP_SSL/d" $(1); \
 459                         echo "TCONFIG_FTP_SSL=y" >>$(1); \
 460                 fi; \
 461         fi; \
 462         if [ "$(SNMP)" = "y" ]; then \
 463                 sed -i "/TCONFIG_SNMP/d" $(1); \
 464                 echo "TCONFIG_SNMP=y" >>$(1); \
 465         fi; \
 466         if [ "$(USERPPTP)" = "y" ]; then \
 467                 sed -i "/TCONFIG_USERPPTP/d" $(1); \
 468                 echo "TCONFIG_USERPPTP=y" >>$(1); \
 469         fi; \
 470         if [ "$(VLAN)" = "y" ]; then \
 471                 sed -i "/TCONFIG_VLAN/d" $(1); \
 472                 echo "TCONFIG_VLAN=y" >>$(1); \
 473         fi; \
 474         if [ "$(PPTPD)" = "y" ]; then \
 475                 sed -i "/TCONFIG_PPTPD/d" $(1); \
 476                 echo "TCONFIG_PPTPD=y" >>$(1); \
 477         fi; \
 478         if [ "$(DNSCRYPT)" = "y" ]; then \
 479                 sed -i "/TCONFIG_DNSCRYPT/d" $(1); \
 480                 echo "TCONFIG_DNSCRYPT=y" >>$(1); \
 481         fi; \
 482         if [ "$(NVRAM_64K)" = "y" ]; then \
 483                 sed -i "/TCONFIG_NVRAM_64K/d" $(1); \
 484                 echo "TCONFIG_NVRAM_64K=y" >>$(1); \
 485         fi; \
 486         if [ "$(TCPDUMP)" = "y" ]; then \
 487                 sed -i "/TCONFIG_TCPDUMP/d" $(1); \
 488                 echo "TCONFIG_TCPDUMP=y" >>$(1); \
 489                 fi; \
 490 if [ "$(USBAP)" = "y" ]; then \
 491                 sed -i "/TCONFIG_USBAP/d" $(1); \
 492                 echo "TCONFIG_USBAP=y" >>$(1); \
 493                 if [ "$(NO_USBAPP)" = "y" ]; then \
 494                         sed -i "/TCONFIG_REMOVE_USBAPP/d" $(1); \
 495                         echo "TCONFIG_REMOVE_USBAPP=y" >>$(1); \
 496                         sed -i "/TCONFIG_FTP/d" $(1); \
 497                         echo "# TCONFIG_FTP is not set" >>$(1); \
 498                         echo "# TCONFIG_FTP_SSL is not set" >>$(1); \
 499                         sed -i "/TCONFIG_SAMBA/d" $(1); \
 500                         echo "# TCONFIG_SAMBASRV is not set" >>$(1); \
 501                         echo "# TCONFIG_SAMBA3 is not set" >>$(1); \
 502                 fi; \
 503         fi; \
 504         )
 505 endef
 506
 507 define BusyboxOptions
 508         @( \
 509         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 510                 sed -i "/CONFIG_FEATURE_2_4_MODULES/d" $(1); \
 511                 echo "# CONFIG_FEATURE_2_4_MODULES is not set" >>$(1); \
 512                 sed -i "/CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT/d" $(1); \
 513                 echo "CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y" >>$(1); \
 514                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 515                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 516                 sed -i "/CONFIG_MKNOD/d" $(1); \
 517                 echo "CONFIG_MKNOD=y" >>$(1); \
 518                 sed -i "/CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE/d" $(1); \
 519                 echo "CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=512" >>$(1); \
 520         fi; \
 521         if [ "$(NO_CIFS)" = "y" ]; then \
 522                 sed -i "/CONFIG_FEATURE_MOUNT_CIFS/d" $(1); \
 523                 echo "# CONFIG_FEATURE_MOUNT_CIFS is not set" >>$(1); \
 524         fi; \
 525         if [ "$(BBEXTRAS)" = "y" ]; then \
 526                 sed -i "/CONFIG_SENDMAIL/d" $(1); \
 527                 echo "CONFIG_SENDMAIL=y" >>$(1); \
 528                 sed -i "/CONFIG_FEATURE_SORT_BIG/d" $(1); \
 529                 echo "CONFIG_FEATURE_SORT_BIG=y" >>$(1); \
 530                 sed -i "/CONFIG_FTPPUT/d" $(1); \
 531                 echo "CONFIG_FTPPUT=y" >>$(1); \
 532                 sed -i "/CONFIG_FTPGET/d" $(1); \
 533                 echo "CONFIG_FTPGET=y" >>$(1); \
 534                 sed -i "/CONFIG_CLEAR/d" $(1); \
 535                 echo "CONFIG_CLEAR=y" >>$(1); \
 536                 sed -i "/CONFIG_NICE/d" $(1); \
 537                 echo "CONFIG_NICE=y" >>$(1); \
 538                 sed -i "/CONFIG_SETCONSOLE/d" $(1); \
 539                 echo "CONFIG_SETCONSOLE=y" >>$(1); \
 540                 sed -i "/CONFIG_MKFIFO/d" $(1); \
 541                 echo "CONFIG_MKFIFO=y" >>$(1); \
 542         fi; \
 543         if [ "$(USB)" = "USB" ]; then \
 544                 if [ "$(USBEXTRAS)" = "y" ]; then \
 545                         sed -i "/CONFIG_E2FSCK/d" $(1); \
 546                         echo "CONFIG_E2FSCK=y" >>$(1); \
 547                         sed -i "/CONFIG_MKE2FS/d" $(1); \
 548                         echo "CONFIG_MKE2FS=y" >>$(1); \
 549                         sed -i "/CONFIG_FDISK/d" $(1); \
 550                         echo "CONFIG_FDISK=y" >>$(1); \
 551                         sed -i "/CONFIG_FEATURE_FDISK_WRITABLE/d" $(1); \
 552                         echo "CONFIG_FEATURE_FDISK_WRITABLE=y" >>$(1); \
 553                         sed -i "/CONFIG_MKFS_VFAT/d" $(1); \
 554                         echo "CONFIG_MKFS_VFAT=y" >>$(1); \
 555                         sed -i "/CONFIG_MKSWAP/d" $(1); \
 556                         echo "CONFIG_MKSWAP=y" >>$(1); \
 557                         sed -i "/CONFIG_FLOCK/d" $(1); \
 558                         echo "CONFIG_FLOCK=y" >>$(1); \
 559                         sed -i "/CONFIG_FSYNC/d" $(1); \
 560                         echo "CONFIG_FSYNC=y" >>$(1); \
 561                         sed -i "/CONFIG_TUNE2FS/d" $(1); \
 562                         echo "CONFIG_TUNE2FS=y" >>$(1); \
 563                         sed -i "/CONFIG_E2LABEL/d" $(1); \
 564                         echo "CONFIG_E2LABEL=y" >>$(1); \
 565                         if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 566                                 sed -i "/CONFIG_LSUSB/d" $(1); \
 567                                 echo "CONFIG_LSUSB=y" >>$(1); \
 568                                 sed -i "/CONFIG_FEATURE_WGET_STATUSBAR/d" $(1); \
 569                                 echo "CONFIG_FEATURE_WGET_STATUSBAR=y" >>$(1); \
 570                                 sed -i "/CONFIG_FEATURE_VERBOSE_USAGE/d" $(1); \
 571                                 echo "CONFIG_FEATURE_VERBOSE_USAGE=y" >>$(1); \
 572                         fi; \
 573                 fi; \
 574         else \
 575                 sed -i "/CONFIG_FEATURE_MOUNT_LOOP/d" $(1); \
 576                 echo "# CONFIG_FEATURE_MOUNT_LOOP is not set" >>$(1); \
 577                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 578                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 579                 sed -i "/CONFIG_FEATURE_MOUNT_LABEL/d" $(1); \
 580                 echo "# CONFIG_FEATURE_MOUNT_LABEL is not set" >>$(1); \
 581                 sed -i "/CONFIG_FEATURE_MOUNT_FSTAB/d" $(1); \
 582                 echo "# CONFIG_FEATURE_MOUNT_FSTAB is not set" >>$(1); \
 583                 sed -i "/CONFIG_VOLUMEID/d" $(1); \
 584                 echo "# CONFIG_VOLUMEID is not set" >>$(1); \
 585                 sed -i "/CONFIG_BLKID/d" $(1); \
 586                 echo "# CONFIG_BLKID is not set" >>$(1); \
 587                 sed -i "/CONFIG_SWAPONOFF/d" $(1); \
 588                 echo "# CONFIG_SWAPONOFF is not set" >>$(1); \
 589                 sed -i "/CONFIG_CHROOT/d" $(1); \
 590                 echo "# CONFIG_CHROOT is not set" >>$(1); \
 591                 sed -i "/CONFIG_PIVOT_ROOT/d" $(1); \
 592                 echo "# CONFIG_PIVOT_ROOT is not set" >>$(1); \
 593                 sed -i "/CONFIG_TRUE/d" $(1); \
 594                 echo "# CONFIG_TRUE is not set" >>$(1); \
 595         fi; \
 596         if [ "$(IPV6SUPP)" = "y" ]; then \
 597                 sed -i "/CONFIG_FEATURE_IPV6/d" $(1); \
 598                 echo "CONFIG_FEATURE_IPV6=y" >>$(1); \
 599                 sed -i "/CONFIG_PING6/d" $(1); \
 600                 echo "CONFIG_PING6=y" >>$(1); \
 601                 sed -i "/CONFIG_TRACEROUTE6/d" $(1); \
 602                 echo "CONFIG_TRACEROUTE6=y" >>$(1); \
 603                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 604                         sed -i "/CONFIG_FEATURE_UDHCP_RFC5969/d" $(1); \
 605                         echo "CONFIG_FEATURE_UDHCP_RFC5969=y" >>$(1); \
 606                 fi; \
 607         fi; \
 608         if [ "$(SLIM)" = "y" ]; then \
 609                 sed -i "/CONFIG_AWK/d" $(1); \
 610                 echo "# CONFIG_AWK is not set" >>$(1); \
 611                 sed -i "/CONFIG_BASENAME/d" $(1); \
 612                 echo "# CONFIG_BASENAME is not set" >>$(1); \
 613                 sed -i "/CONFIG_FEATURE_DEVFS/d" $(1); \
 614                 echo "# CONFIG_FEATURE_DEVFS is not set" >>$(1); \
 615                 sed -i "/CONFIG_BLKID/d" $(1); \
 616                 echo "# CONFIG_BLKID is not set" >>$(1); \
 617                 sed -i "/CONFIG_TELNET=y/d" $(1); \
 618                 echo "# CONFIG_TELNET is not set" >>$(1); \
 619                 sed -i "/CONFIG_ARPING/d" $(1); \
 620                 echo "# CONFIG_ARPING is not set" >>$(1); \
 621                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 622                 echo "# CONFIG_FEATURE_LS_COLOR is not set" >>$(1); \
 623                 sed -i "/CONFIG_CHOWN/d" $(1); \
 624                 echo "# CONFIG_CHOWN is not set" >>$(1); \
 625         else \
 626                 sed -i "/CONFIG_FEATURE_LS_COLOR/d" $(1); \
 627                 echo "CONFIG_FEATURE_LS_COLOR=y" >>$(1); \
 628                 sed -i "/CONFIG_FEATURE_LS_COLOR_IS_DEFAULT/d" $(1); \
 629                 echo "CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y" >>$(1); \
 630         fi; \
 631         )
 632 endef
 633
 634 define KernelConfig
 635         @( \
 636         sed -i "/CONFIG_NVRAM_SIZE/d" $(1); \
 637         echo "CONFIG_NVRAM_SIZE="$(NVRAM_SIZE) >>$(1); \
 638         sed -i "/CONFIG_CC_OPTIMIZE_FOR_SIZE/d" $(1); \
 639         if [ "$(KERN_SIZE_OPT)" = "y" ]; then \
 640                 echo "CONFIG_CC_OPTIMIZE_FOR_SIZE=y" >>$(1); \
 641         else \
 642                 echo "# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set" >>$(1); \
 643         fi; \
 644         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(MIPS32)" = "r2" ]; then \
 645                 sed -i "/CONFIG_CPU_MIPS32_R1/d" $(1); \
 646                 echo "# CONFIG_CPU_MIPS32_R1 is not set" >>$(1); \
 647                 sed -i "/CONFIG_CPU_MIPS32_R2/d" $(1); \
 648                 echo "CONFIG_CPU_MIPS32_R2=y" >>$(1); \
 649                 sed -i "/CONFIG_CPU_MIPSR1/d" $(1); \
 650                 echo "CONFIG_CPU_MIPSR2=y" >>$(1); \
 651                 if [ "$(WNR3500LV2)" = "y" ]; then \
 652                         sed -i "/CONFIG_MTD_NFLASH/d" $(1); \
 653                         echo "CONFIG_MTD_NFLASH=y" >>$(1); \
 654                 fi; \
 655         fi; \
 656         if [ "$(USB)" = "" ]; then \
 657                 sed -i "/CONFIG_EFI_PARTITION/d" $(1); \
 658                 echo "# CONFIG_EFI_PARTITION is not set" >>$(1); \
 659         fi; \
 660         if [ "$(IPV6SUPP)" = "y" ]; then \
 661                 sed -i "/CONFIG_IPV6 is not set/d" $(1); \
 662                 echo "CONFIG_IPV6=y" >>$(1); \
 663                 sed -i "/CONFIG_IP6_NF_IPTABLES/d" $(1); \
 664                 echo "CONFIG_IP6_NF_IPTABLES=y" >>$(1); \
 665                 sed -i "/CONFIG_IP6_NF_MATCH_RT/d" $(1); \
 666                 echo "CONFIG_IP6_NF_MATCH_RT=y" >>$(1); \
 667                 sed -i "/CONFIG_IP6_NF_FILTER/d" $(1); \
 668                 echo "CONFIG_IP6_NF_FILTER=m" >>$(1); \
 669                 sed -i "/CONFIG_IP6_NF_TARGET_LOG/d" $(1); \
 670                 echo "CONFIG_IP6_NF_TARGET_LOG=m" >>$(1); \
 671                 sed -i "/CONFIG_IP6_NF_TARGET_REJECT/d" $(1); \
 672                 echo "CONFIG_IP6_NF_TARGET_REJECT=m" >>$(1); \
 673                 sed -i "/CONFIG_IP6_NF_MANGLE/d" $(1); \
 674                 echo "CONFIG_IP6_NF_MANGLE=m" >>$(1); \
 675                 if [ "$(CONFIG_LINUX26)" = "y" ]; then \
 676                         sed -i "/CONFIG_NF_CONNTRACK_IPV6/d" $(1); \
 677                         echo "CONFIG_NF_CONNTRACK_IPV6=m" >>$(1); \
 678                         sed -i "/CONFIG_NETFILTER_XT_MATCH_HL/d" $(1); \
 679                         echo "CONFIG_NETFILTER_XT_MATCH_HL=m" >>$(1); \
 680                         sed -i "/CONFIG_IPV6_ROUTER_PREF/d" $(1); \
 681                         echo "CONFIG_IPV6_ROUTER_PREF=y" >>$(1); \
 682                         sed -i "/CONFIG_IPV6_SIT/d" $(1); \
 683                         echo "CONFIG_IPV6_SIT=m" >>$(1); \
 684                         sed -i "/CONFIG_IPV6_SIT_6RD/d" $(1); \
 685                         echo "CONFIG_IPV6_SIT_6RD=y" >>$(1); \
 686                         sed -i "/CONFIG_IPV6_MULTIPLE_TABLES/d" $(1); \
 687                         echo "CONFIG_IPV6_MULTIPLE_TABLES=y" >>$(1); \
 688                         sed -i "/CONFIG_IP6_NF_RAW/d" $(1); \
 689                         echo "CONFIG_IP6_NF_RAW=m" >>$(1); \
 690                         sed -i "/CONFIG_IPV6_OPTIMISTIC_DAD/d" $(1); \
 691                         echo "CONFIG_IPV6_OPTIMISTIC_DAD=y" >>$(1); \
 692                         sed -i "/CONFIG_IPV6_MROUTE/d" $(1); \
 693                         echo "CONFIG_IPV6_MROUTE=y" >>$(1); \
 694                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 695                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 696                 else \
 697                         sed -i "/CONFIG_IP6_NF_CONNTRACK/d" $(1); \
 698                         echo "CONFIG_IP6_NF_CONNTRACK=m" >>$(1); \
 699                         sed -i "/CONFIG_IP6_NF_MATCH_HL/d" $(1); \
 700                         echo "CONFIG_IP6_NF_MATCH_HL=m" >>$(1); \
 701                         sed -i "/CONFIG_IP6_NF_FTP/d" $(1); \
 702                         echo "CONFIG_IP6_NF_FTP=m" >>$(1); \
 703                         sed -i "/CONFIG_IP6_NF_MATCH_LIMIT/d" $(1); \
 704                         echo "CONFIG_IP6_NF_MATCH_LIMIT=m" >>$(1); \
 705                         sed -i "/CONFIG_IP6_NF_MATCH_CONDITION/d" $(1); \
 706                         echo "CONFIG_IP6_NF_MATCH_CONDITION=m" >>$(1); \
 707                         sed -i "/CONFIG_IP6_NF_MATCH_MAC/d" $(1); \
 708                         echo "CONFIG_IP6_NF_MATCH_MAC=m" >>$(1); \
 709                         sed -i "/CONFIG_IP6_NF_MATCH_MULTIPORT/d" $(1); \
 710                         echo "CONFIG_IP6_NF_MATCH_MULTIPORT=m" >>$(1); \
 711                         sed -i "/CONFIG_IP6_NF_MATCH_MARK/d" $(1); \
 712                         echo "CONFIG_IP6_NF_MATCH_MARK=m" >>$(1); \
 713                         sed -i "/CONFIG_IP6_NF_MATCH_LENGTH/d" $(1); \
 714                         echo "CONFIG_IP6_NF_MATCH_LENGTH=m" >>$(1); \
 715                         sed -i "/CONFIG_IP6_NF_MATCH_STATE/d" $(1); \
 716                         echo "CONFIG_IP6_NF_MATCH_STATE=m" >>$(1); \
 717                         sed -i "/CONFIG_IP6_NF_TARGET_MARK/d" $(1); \
 718                         echo "CONFIG_IP6_NF_TARGET_MARK=m" >>$(1); \
 719                         sed -i "/CONFIG_IP6_NF_TARGET_TCPMSS/d" $(1); \
 720                         echo "CONFIG_IP6_NF_TARGET_TCPMSS=m" >>$(1); \
 721                         sed -i "/CONFIG_IP6_NF_TARGET_ROUTE/d" $(1); \
 722                         echo "CONFIG_IP6_NF_TARGET_ROUTE=m" >>$(1); \
 723                 fi; \
 724         fi; \
 725         sed -i "/CONFIG_BCM57XX/d" $(1); \
 726         if [ "$(BCM57)" = "y" ]; then \
 727                 echo "CONFIG_BCM57XX=m" >>$(1); \
 728         else \
 729                 echo "# CONFIG_BCM57XX is not set" >>$(1); \
 730         fi; \
 731         if [ "$(USBAP)" = "y" ]; then \
 732                 echo "CONFIG_WL_USBAP=y" >>$(1); \
 733                 echo 'CONFIG_WL_APSTA="wlconfig_lx_router_high"' >>$(1); \
 734         else \
 735                 echo "# CONFIG_WL_USBAP is not set" >>$(1); \
 736                 echo 'CONFIG_WL_APSTA="wlconfig_lx_router_apsta"' >>$(1); \
 737         fi; \
 738         if [ "$(CONFIG_LINUX26)" = "y" ] && [ "$(EBTABLES)" = "y" ]; then \
 739                 sed -i "/CONFIG_BRIDGE_NF_EBTABLES/d" $(1); \
 740                 echo "CONFIG_BRIDGE_NF_EBTABLES=m" >>$(1); \
 741                 if [ "$(IPV6SUPP)" = "y" ]; then \
 742                         sed -i "/CONFIG_BRIDGE_EBT_IP6/d" $(1); \
 743                         echo "CONFIG_BRIDGE_EBT_IP6=m" >>$(1); \
 744                 fi; \
 745         fi; \
 746         sed -i "/CONFIG_NVRAM_64K/d" $(1); \
 747         if [ "$(NVRAM_64K)" = "y" ]; then \
 748                 echo "CONFIG_NVRAM_64K=y" >>$(1); \
 749         else \
 750                 echo "# CONFIG_NVRAM_64K is not set" >>$(1); \
 751         fi \
 752         )
 753 endef
 754
 755
 756 bin:
 757 ifeq ($(B),)
 758         @echo $@" is not a valid target!"
 759         @false
 760 endif
 761         @cp router/config_base router/config_$(lowercase_B)
 762         @cp router/busybox/config_base router/busybox/config_$(lowercase_B)
 763         @cp $(LINUXDIR)/config_base $(LINUXDIR)/config_$(lowercase_B)
 764
 765         $(call RouterOptions, router/config_$(lowercase_B))
 766         $(call KernelConfig, $(LINUXDIR)/config_$(lowercase_B))
 767         $(call BusyboxOptions, router/busybox/config_$(lowercase_B))
 768
 769         @$(MAKE) setprofile N=$(TPROFILE) B=$(B) DESC="$(BUILD_DESC)" USB="$(USB)" MIPS32="${MIPS32}" V1="${V1}" V2="${V2}"
 770         @$(MAKE) all
 771
 772 ## Make the "normal" build
 773 a:
 774         @$(MAKE) bin B=A BUILD_DESC="Std" USB="USB" VLAN="$(VLAN)" SNMP=y
 775
 776 ## Make the "normal but without SSH" build
 777 b:
 778         @$(MAKE) bin NO_SSH=y B=B BUILD_DESC="No SSH" USB="USB" VLAN="$(VLAN)" SNMP=y
 779
 780 ## Make the "normal but without CIFS" build
 781 c:
 782         @$(MAKE) bin NO_CIFS=y B=C BUILD_DESC="No CIFS" USB="USB" VLAN="$(VLAN)" SNMP=y
 783
 784 ## Make the "normal but without SAMBA" (Lite) build
 785 d:
 786 ifeq ($(CONFIG_LINUX26),y)
 787         @$(MAKE) bin NO_SAMBA=y SLIM=y NO_CIFS=y NO_JFFS=y NO_ZEBRA=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 788 else
 789         @$(MAKE) bin NO_SAMBA=y SLIM=y B=D BUILD_DESC="Lite" USB="USB" VLAN="$(VLAN)" SNMP="$(SNMP)"
 790 endif
 791
 792 ## Make the "normal (with NTFS support) + VPN" build
 793 e:
 794 ifeq ($(CONFIG_LINUX26),y)
 795         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" SNMP=y DNSCRYPT=y TCPDUMP="$(TCPDUMP)"
 796 else
 797 #       @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)"
 798         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y BBEXTRAS=y USBEXTRAS=y NTFS=y B=E BUILD_DESC="$(VPN)" USB="USB" SNMP=y DNSCRYPT=y  VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 799 endif
 800
 801 ## Make the "Mini: no USB, no CIFS, no Zebra" build - targeted for Netgear routers
 802 f:
 803         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_ZEBRA=y SLIM=y B=F BUILD_DESC="Mini" USB="" VLAN="$(VLAN)"
 804
 805 ## Make the "Tiny: no JFFS, no USB, no CIFS, no Zebra" build - targeted for cheapskate routers
 806 fs:
 807         @$(MAKE) bin NO_CIFS=y NO_SSH=y NO_JFFS=y NO_ZEBRA=y SLIM=y B=FS BUILD_DESC="Tiny" USB="" VLAN="$(VLAN)"
 808
 809 ## Make the "No USB with IPv6, no Zebra" build - for 4MB routers
 810 i:
 811         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_ZEBRA=y IPV6SUPP=y B=I BUILD_DESC="MiniIPv6" USB="" VLAN="$(VLAN)"
 812
 813 ## Make the "No USB with IPv6, no Zebra, with VPN" build - for 4MB routers
 814 ifeq ($(CONFIG_LINUX26),y)
 815 j:
 816         @$(MAKE) bin JFFSv1=y NO_CIFS=y NO_SSH=y NO_XXTP=y SLIM=y NO_SAMBA=y NO_ZEBRA=y IPV6SUPP=y OPENVPN=y USERPPTP=y NO_LIBOPT=y B=J BUILD_DESC="MiniIPv6-VPN" USB="" VLAN="$(VLAN)" SNMP="$(SNMP)"
 817 endif
 818
 819 ## Make the "normal with Extras and NTFS" build
 820 m:
 821 ifeq ($(CONFIG_LINUX26),y)
 822         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y USERPPTP=y  PPTPD=y DNSCRYPT=y TCPDUMP="$(TCPDUMP)"
 823 else
 824         @$(MAKE) bin NTFS=y BBEXTRAS=y USBEXTRAS=y B=M BUILD_DESC="Ext" USB="USB" VLAN="$(VLAN)" SNMP=y USERPPTP=y PPTPD=y DNSCRYPT=y TCPDUMP="$(TCPDUMP)"
 825 endif
 826
 827 ## Roadkill
 828 ## Make the "normal (with NTFS support) + VPN + NOCAT + NGINX (option) + VLAN (option)" build
 829 nc:
 830 ifeq ($(CONFIG_LINUX26),y)
 831         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y DNSCRYPT=y B=NC BUILD_DESC="$(VPN)" USB="USB" SNMP=y VLAN="$(VLAN)" NOCAT=y TCPDUMP="$(TCPDUMP)" BUILD_DESC+="-$(NC)" BUILD_DESC="$(NG)"
 832 else
 833         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NTFS=y DNSCRYPT=y B=NC BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" NOCAT=y TCPDUMP="$(TCPDUMP)" BUILD_DESC+=" $(NC)"
 834 endif
 835
 836 ## Toastman
 837 ## Make the "Mini: no USB, + NOCAT" build - for 4MB routers
 838 ncm:
 839         @$(MAKE) bin JFFSv1=y NOCAT=y B=NCM BUILD_DESC="Mini-NOCAT" USB="" VLAN="$(VLAN)"
 840
 841 ## Toastman
 842 ## Make the "normal" build + NOCAT
 843 ncs:
 844         @$(MAKE) bin NOCAT=y B=NCS BUILD_DESC="Std-NOCAT" USB="USB" SNMP=y VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 845
 846
 847 ## Make the "No USB" build
 848 s:
 849 ifeq ($(CONFIG_LINUX26),y)
 850         @$(MAKE) bin JFFSv1=y $(if $(filter r2, $(MIPS32)),,BCM57=y) B=S BUILD_DESC="Std" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 851 else
 852         @$(MAKE) bin BBEXTRAS=y BCM57=y B=S BUILD_DESC="Std" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)"
 853 endif
 854
 855
 856 ## Make the "No USB with Extras" build (K26 only, for 8MB flash)
 857 ifeq ($(CONFIG_LINUX26),y)
 858 t:
 859         @$(MAKE) bin B=T USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y BUILD_DESC="Std" SNMP=y VLAN="$(VLAN)"
 860 ## Make the "No USB with OpenVPN and Extras" build (K26 only, for 8MB flash)
 861 u:
 862         @$(MAKE) bin B=U USB="" BBEXTRAS=y EBTABLES=y NO_LIBOPT=y $(if $(filter r2, $(MIPS32)),,BCM57=y) IPV6SUPP=y OPENVPN=y USERPPTP=y BUILD_DESC="$(VPN)"  SNMP=y VLAN="$(VLAN)"
 863 endif
 864
 865 ## Make the "VPN with no USB support" build
 866 v:
 867 ifeq ($(CONFIG_LINUX26),y)
 868         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y BCM57=y B=V BUILD_DESC="$(VPN)" USB="" VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)" TCPDUMP="$(TCPDUMP)"
 869 else
 870         @$(MAKE) bin OPENVPN=y PPTPD=y BBEXTRAS=y B=V BUILD_DESC="$(VPN)" USB=""  SNMP=y VLAN="$(VLAN)" TCPDUMP="$(TCPDUMP)" TCPDUMP="$(TCPDUMP)"
 871 endif
 872
 873 ## Make the "Small VPN with no USB support" build
 874 vs:
 875 ifeq ($(CONFIG_LINUX26),y)
 876         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y NO_CIFS=y B=VS BUILD_DESC="SmallVPN" USB=""
 877 else
 878         @$(MAKE) bin OPENVPN=y USERPPTP=y PPTPD=y NO_JFFS=y NO_CIFS=y BCM57=y B=VS BUILD_DESC="SmallVPN" USB=""
 879 endif
 880
 881
 882 ## Make Mips32r2 builds
 883
 884 r2a:
 885         @$(MAKE) a MIPS32=r2
 886
 887 r2b:
 888         @$(MAKE) b MIPS32=r2
 889
 890 r2c:
 891         @$(MAKE) c MIPS32=r2
 892
 893 r2d:
 894         @$(MAKE) d MIPS32=r2
 895
 896 r2e:
 897         @$(MAKE) e MIPS32=r2
 898
 899 r2f:
 900         @$(MAKE) f MIPS32=r2
 901
 902 r2fb:
 903         @$(MAKE) f MIPS32=r2 BELKIN=y
 904
 905 r2fs:
 906         @$(MAKE) fs MIPS32=r2
 907
 908 r2i:
 909         @$(MAKE) i MIPS32=r2
 910
 911 r2j:
 912         @$(MAKE) j MIPS32=r2
 913
 914 r2m:
 915         @$(MAKE) m MIPS32=r2
 916
 917 r2n:
 918         @$(MAKE) n MIPS32=r2
 919
 920 r2nc:
 921         @$(MAKE) nc MIPS32=r2
 922
 923 r2r:
 924         @$(MAKE) r MIPS32=r2
 925
 926 r2s:
 927         @$(MAKE) s MIPS32=r2
 928
 929 r2t:
 930         @$(MAKE) t MIPS32=r2
 931
 932 r2u:
 933         @$(MAKE) t MIPS32=r2
 934
 935 r2v:
 936         @$(MAKE) v MIPS32=r2
 937
 938 r2vs:
 939         @$(MAKE) vs MIPS32=r2
 940
 941 #Linksys E-Series with 60K Nvram Builds
 942
 943 n60a:
 944         @$(MAKE) r2a NVRAM_SIZE=60 LINKSYS_E=y
 945
 946 n60b:
 947         @$(MAKE) r2b NVRAM_SIZE=60 LINKSYS_E=y
 948
 949 n60c:
 950         @$(MAKE) r2c NVRAM_SIZE=60 LINKSYS_E=y
 951
 952 n60e:
 953         @$(MAKE) r2e NVRAM_SIZE=60 LINKSYS_E=y
 954
 955 n60m:
 956         @$(MAKE) r2m NVRAM_SIZE=60 LINKSYS_E=y
 957
 958 n60n:
 959         @$(MAKE) r2n NVRAM_SIZE=60 LINKSYS_E=y
 960
 961 n60nc:
 962         @$(MAKE) r2nc NVRAM_SIZE=60 LINKSYS_E=y
 963
 964 n60o:
 965         @$(MAKE) r2o NVRAM_SIZE=60 LINKSYS_E=y
 966
 967 n60r:
 968         @$(MAKE) r2r NVRAM_SIZE=60 LINKSYS_E=y
 969
 970 n60s:
 971         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=60 LINKSYS_E=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
 972
 973 n60v:
 974         @$(MAKE) r2v NVRAM_SIZE=60 LINKSYS_E=y
 975
 976
 977 #Linksys E-Series with 64K Nvram Builds
 978
 979 n64a:
 980         @$(MAKE) r2a NVRAM_SIZE=64 LINKSYS_E_64=y
 981
 982 n64b:
 983         @$(MAKE) r2b NVRAM_SIZE=64 LINKSYS_E_64=y
 984
 985 n64c:
 986         @$(MAKE) r2c NVRAM_SIZE=64 LINKSYS_E_64=y
 987
 988 n64e:
 989         @$(MAKE) r2e NVRAM_SIZE=64 LINKSYS_E_64=y
 990
 991 n64m:
 992         @$(MAKE) r2m NVRAM_SIZE=64 LINKSYS_E_64=y
 993
 994 n64n:
 995         @$(MAKE) r2n NVRAM_SIZE=64 LINKSYS_E_64=y
 996
 997 n64nc:
 998         @$(MAKE) r2nc NVRAM_SIZE=64 LINKSYS_E_64=y
 999
1000 n64o:
1001         @$(MAKE) r2o NVRAM_SIZE=64 LINKSYS_E_64=y
1002
1003 n64r:
1004         @$(MAKE) r2r NVRAM_SIZE=64 LINKSYS_E_64=y
1005
1006 n64s:
1007         @$(MAKE) bin MIPS32=r2 B=S USB="" NVRAM_SIZE=64 LINKSYS_E_64=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y BUILD_DESC="Std"
1008
1009 n64v:
1010         @$(MAKE) r2v NVRAM_SIZE=64 LINKSYS_E_64=y
1011
1012
1013 #Linksys E-Series with 4MB Flash
1014
1015 e1000v2i:
1016         @$(MAKE) r2i NVRAM_SIZE=32 LINKSYS_E1000v2=y
1017
1018 e1000v2f:
1019         @$(MAKE) r2f NVRAM_SIZE=32 LINKSYS_E1000v2=y
1020
1021 e1200v1i:
1022         @$(MAKE) r2i NVRAM_SIZE=64 LINKSYS_E1200v1=y
1023
1024 e1200v1f:
1025         @$(MAKE) r2f NVRAM_SIZE=64 LINKSYS_E1200v1=y
1026
1027
1028 #Builds for WNR3500L v2
1029
1030 v2e:
1031         @$(MAKE) e MIPS32=r2 WNR3500LV2=y NO_JFFS=y
1032
1033 rtn53:
1034         @$(MAKE) bin MIPS32=r2 OPENVPN=y BBEXTRAS=y EBTABLES=y NO_LIBOPT=y IPV6SUPP=y B=E BUILD_DESC="RT-N53" SNMP=y NOCAT=y VLAN=y PPTPD=y NOCAT=y USBAP=y NO_USBAPP=y
1035
1036 e2500:
1037         @$(MAKE) bin MIPS32=r2 OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y NO_LIBOPT=y VLAN=y EBTABLES=y IPV6SUPP=y SNMP=y NOCAT=y NGINX=n USBAP=y NO_USBAPP=y NVRAM_SIZE=60 BUILD_DESC+="-$(VLAN)" BUILD_DESC="$(VPN)" BUILD_DESC+="-$(NC)" LINKSYS_E2500=y
1038
1039 e3200:
1040         @$(MAKE) bin MIPS32=r2 OPENVPN=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y USB="USB" NOCAT=y BBEXTRAS=y SNMP=y DNSCRYPT=y USERPPTP=y PPTPD=y NGINX=y VLAN=y USBAP=y NO_USBAPP=y NVRAM_SIZE=60 LINKSYS_E3200=y
1041
1042 l600n:
1043         @$(MAKE) bin MIPS32=r2 OPENVPN=y USERPPTP=y PPTPD=y NTFS=y BBEXTRAS=y USBEXTRAS=y EBTABLES=y NO_LIBOPT=y MEDIASRV=y IPV6SUPP=y B=NC BUILD_DESC="$(VPN)" USB="USB" VLAN="$(VLAN)" SNMP=y NOCAT=y USBAP=y NO_USBAPP=y B=NC BUILD_DESC+="-$(NC)"  BUILD_DESC+="$(L600N)"
1044
1045 setprofile:
1046         echo '#ifndef TOMATO_PROFILE' > router/shared/tomato_profile.h
1047         echo '#define TOMATO_$(N) 1' >> router/shared/tomato_profile.h
1048         echo '#define PROFILE_G 1' >> router/shared/tomato_profile.h
1049         echo '#define PROFILE_N 2' >> router/shared/tomato_profile.h
1050         echo '#define TOMATO_PROFILE PROFILE_$(N)' >> router/shared/tomato_profile.h
1051         echo '#define TOMATO_PROFILE_NAME "$(N)"' >> router/shared/tomato_profile.h
1052         echo '#define TOMATO_BUILD_NAME "$(B)"' >> router/shared/tomato_profile.h
1053         echo '#define TOMATO_BUILD_DESC "$(EXTRA_PREDESC)$(DESC)$(EXTRA_POSTDESC)"' >> router/shared/tomato_profile.h
1054         echo '#ifndef CONFIG_NVRAM_SIZE' >> router/shared/tomato_profile.h
1055         echo '#define CONFIG_NVRAM_SIZE $(NVRAM_SIZE)' >> router/shared/tomato_profile.h
1056         echo '#endif' >> router/shared/tomato_profile.h
1057         echo '#endif' >> router/shared/tomato_profile.h
1058
1059         echo 'TOMATO_$(N) = 1' > tomato_profile.mak
1060         echo 'PROFILE_G = 1' >> tomato_profile.mak
1061         echo 'PROFILE_N = 2' >> tomato_profile.mak
1062         echo 'TOMATO_PROFILE = $$(PROFILE_$(N))' >> tomato_profile.mak
1063         echo 'TOMATO_PROFILE_NAME = "$(N)"' >> tomato_profile.mak
1064         echo 'TOMATO_BUILD = "$(B)"' >> tomato_profile.mak
1065         echo 'TOMATO_BUILD_NAME = "$(B)"' >> tomato_profile.mak
1066         echo 'TOMATO_BUILD_DESC = "$(EXTRA_PREDESC)$(DESC)$(EXTRA_POSTDESC)"' >> tomato_profile.mak
1067         echo 'TOMATO_PROFILE_L = $(lowercase_N)' >> tomato_profile.mak
1068         echo 'TOMATO_PROFILE_U = $(uppercase_N)' >> tomato_profile.mak
1069         echo 'TOMATO_BUILD_USB = "$(USB)"' >> tomato_profile.mak
1070         echo 'TOMATO_BUILD_MIPS32 = "${MIPS32}"' >> tomato_profile.mak
1071         echo 'TOMATO_BUILD_V1 = "${V1}"' >> tomato_profile.mak
1072         echo 'TOMATO_BUILD_V2 = "${V2}"' >> tomato_profile.mak
1073
1074         echo 'export EXTRACFLAGS := $(EXTRA_CFLAGS) -DBCMWPA2 -funit-at-a-time -Wno-pointer-sign -mtune=mips32 -mips32 $(if $(filter $(NVRAM_SIZE),0),,-DCONFIG_NVRAM_SIZE=$(NVRAM_SIZE)) $(EXTRA_64KCFLAG)' >> tomato_profile.mak
1075
1076 # Note that changes to variables in tomato_profile.mak don't
1077 # get propogated to this invocation of make!
1078         @echo ""
1079         @echo "Using $(N) profile, $(B) build config."
1080         @echo ""
1081
1082         @cd $(LINUXDIR) ; \
1083                 rm -f config_current ; \
1084                 ln -s config_$(lowercase_B) config_current ; \
1085                 cp -f config_current .config
1086
1087         @cd router/busybox && \
1088                 rm -f config_current ; \
1089                 ln -s config_$(lowercase_B) config_current ; \
1090                 cp config_current .config
1091
1092         @cd router ; \
1093                 rm -f config_current ; \
1094                 ln -s config_$(lowercase_B) config_current ; \
1095                 cp config_current .config
1096
1097         @$(MAKE) -C router oldconfig
1098
1099 help:
1100         @echo "a            A build (standard)"
1101         @echo "b            B build (standard minus SSH)"
1102         @echo "c            C build (standard minus CIFS)"
1103         @echo "d            D build (standard minus Samba server)"
1104         @echo "m            M build (standard plus extra utilities and NTFS support)"
1105         @echo "nc           NC build (standard plus VPN, extra utilities, NTFS support and NOCAT)"
1106         @echo "ncm          NCS build (no USB support, NOCAT)"
1107         @echo "ncs          NCS build (std + NOCAT)"
1108         @echo "m            Ext - (standard plus extra utilities and NTFS support)"
1109
1110 ifeq ($(CONFIG_LINUX26),y)
1111         @echo "e            E build (standard plus VPN, extra utilities and NTFS support)"
1112         @echo "i            I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
1113 else
1114         @echo "e            E build (standard plus VPN and NTFS support)"
1115 endif
1116         @echo "s            S build (no USB support)"
1117         @echo "f            F build (no USB support minus CIFS and RIPv1/2)"
1118         @echo "fs           FS build (no USB support minus CIFS, JFFS, Zebra and RIPv1/2)"
1119         @echo "v            V build (VPN with no USB support)"
1120         @echo "vs           VS build (Small VPN with no USB support)"
1121
1122 ifeq ($(CONFIG_LINUX26),y)
1123         @echo "r2a          MIPS Release 2 A build (standard)"
1124         @echo "r2b          MIPS Release 2 B build (standard minus SSH)"
1125         @echo "r2c          MIPS Release 2 C build (standard minus CIFS)"
1126         @echo "r2d          MIPS Release 2 D build (standard minus Samba server)"
1127         @echo "r2e          MIPS Release 2 E build (standard plus VPN and extras)"
1128         @echo "r2f          MIPS Release 2 F build (no USB support minus CIFS, RIPv1/2)"
1129         @echo "r2fs         MIPS Release 2 FS build (no USB support minus JFFS, CIFS, RIPv1/2, Zebra)"
1130         @echo "r2i          MIPS Release 2 I build (IPv6 with no USB support minus CIFS and RIPv1/2)"
1131         @echo "r2m          MIPS Release 2 M build (standard plus extras)"
1132         @echo "r2nc         MIPS Release 2 NC build (standard plus VPN, extras and NOCAT)"
1133         @echo "r2ncm        MIPS Release 2 NCM build (no USB support, plus NOCAT)"
1134         @echo "r2ncs        MIPS Release 2 NCS build (standard plus NOCAT)"
1135         @echo "r2s          MIPS Release 2 S build (no USB support)"
1136         @echo "r2t          MIPS Release 2 T build (no USB support with extras)"
1137         @echo "r2u          MIPS Release 2 U build (no USB support plus VPN with extras)"
1138         @echo "r2v          MIPS Release 2 V build (VPN with no USB support)"
1139         @echo "r2vs         MIPS Release 2 VS build (Small VPN with no USB support)"
1140
1141         @echo "       Linksys E-Series with 60k Nvram"
1142         @echo "n60m         Linksys E-series build (60KB NVRAM, standard plus extras)"
1143         @echo "n60e         Linksys E-series build (60KB NVRAM, standard plus VPN and extras)"
1144         @echo "n60nc        Linksys E-series build (60KB NVRAM, standard plus extras, plus VPN, plus NOCAT)"
1145         @echo "n60s         Linksys E-series build (60KB NVRAM, no USB support)"
1146         @echo "n60v         Linksys E-series build (60KB NVRAM, VPN with no USB support)"
1147
1148         @echo "       Linksys E-Series with 64k Nvram/8MB Flash(E900/E1200v2/E1500)"
1149         @echo "n64m         Linksys E-series build (64KB NVRAM, standard plus extras)"
1150         @echo "n64e         Linksys E-series build (64KB NVRAM, standard plus VPN and extras)"
1151         @echo "n64nc        Linksys E-series build (64KB NVRAM, standard plus extras, plus VPN, plus NOCAT)"
1152         @echo "n64s         Linksys E-series build (64KB NVRAM, no USB support)"
1153         @echo "n64v         Linksys E-series build (64KB NVRAM, VPN with no USB support)"
1154
1155         @echo "       Linksys E-Series with 4MB Flash(E1000v2/v2.1/E1200v1)"
1156         @echo "e1000v2i     Linksys E1000v2-v2.1/Cisco M10v2 MiniIPv6"
1157         @echo "e1000v2f     Linksys E1000v2-v2.1/Cisco M10v2 Mini"
1158         @echo "e1200v1i     Linksys E1200v1 MiniIPv6"
1159         @echo "e1200v1f     Linksys E1200v1 Mini"
1160
1161         @echo "       Netgear WNR3500L v2 builds (128MB Flash)"
1162         @echo "v2e          Netgear WNR3500Lv2 build"
1163         @echo "rtn53        Asus RT-N53"
1164         @echo "e2500        Cisco E-2500"
1165         @echo "e3200        Cisco E-3200"
1166 endif
1167         @echo "..etc..      other build configs"
1168         @echo "clean        -C router clean"
1169         @echo "cleanimage   rm -rf image"
1170         @echo "cleantools   clean btools, mksquashfs"
1171         @echo "cleankernel  -C Linux distclean (but preserves .config)"
1172         @echo "distclean    distclean of Linux & busybox (but preserve .configs)"
1173         @echo "prepk        -C Linux oldconfig dep"
1174
1175 .PHONY: all clean distclean cleanimage cleantools cleankernel prepk what setprofile help
1176 .PHONY: a b c d m Makefile allversions tomato_profile.mak
1177
1178