From 19818e7f9d86f2d5375c2656318bca29d4f71af8 Mon Sep 17 00:00:00 2001 From: Werner LEMBERG Date: Wed, 8 Mar 2000 11:02:09 +0000 Subject: [PATCH] * doc/Makefile: Added texput.log to the `clean' target. * doc/groff.texinfo: Added info about delimiters for escapes. --- ChangeLog | 5 + doc/Makefile | 3 +- doc/groff.texinfo | 243 ++++++++++++++++++++++++++++++++++++++++-------- src/preproc/pic/pic.man | 2 +- 4 files changed, 212 insertions(+), 41 deletions(-) diff --git a/ChangeLog b/ChangeLog index 3ab86b7b..102cecbf 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,8 @@ +2000-03-08 Werner LEMBERG + + * doc/Makefile: Added texput.log to the `clean' target. + * doc/groff.texinfo: Added info about delimiters for escapes. + 2000-03-08 Bernd Warken * src/preproc/pic/pic.man: Add info on conversion of pic images to diff --git a/doc/Makefile b/doc/Makefile index c8e1dced..8e70de0a 100755 --- a/doc/Makefile +++ b/doc/Makefile @@ -67,7 +67,8 @@ install: clean: -rm -f *.ps *.html *.ascii *.png *.gif *.dit core -rm -f *.aux *.cp *.cps *.cv *.cn *.dvi *.fn *.fns *.ky *.kys \ - *.log *.op *.pg *.pgs *.ps *.toc *.tp *.tps *.tr *.vr *.vrs + *.log *.op *.pg *.pgs *.ps *.toc *.tp *.tps *.tr *.vr *.vrs \ + texput.log distclean: clean diff --git a/doc/groff.texinfo b/doc/groff.texinfo index d87bee9f..d85d8462 100644 --- a/doc/groff.texinfo +++ b/doc/groff.texinfo @@ -538,11 +538,12 @@ necessary. Here is a sample; alter the names: @smallexample @group -Yoyodyne, Inc., hereby disclaims all copyright interest in the program -`Gnomovision' (which makes passes at compilers) written by James -Hacker. +Yoyodyne, Inc., hereby disclaims all copyright interest +in the program `Gnomovision' (which makes passes at compilers) +written by James Hacker. -@var{signature of Ty Coon}, 1 April 1989 Ty Coon, President of Vice +@var{signature of Ty Coon}, 1 April 1989 +Ty Coon, President of Vice @end group @end smallexample @@ -1653,7 +1654,7 @@ as many of them together on one output line as it can. This is known as @dfn{filling}. Once @code{gtroff} has a @dfn{filled} line it will try to @dfn{adjust} -it. which means it will widen the spacing between words until the text +it. Which means it will widen the spacing between words until the text reaches the right margin (in the default adjustment mode). Extra spaces between words are preserved, but spaces at the end of lines are ignored. Spaces at the front of a line will cause a @dfn{break} (breaks will be @@ -2014,8 +2015,10 @@ expressions, unless the entire expression is surrounded by parentheses. Like any other language, @code{gtroff} has rules for properly formed @dfn{identifiers}. In @code{gtroff} an identifier can be made up of almost any printable character. The only exception are characters which -are interpreted by @code{gtroff} (backslash, square brackets, and -@samp{?}). So, for example, any of the following is valid. +are interpreted by @code{gtroff} (backslash, square brackets, @dots{}). +So, for example, any of the following is valid. + +@c XXX which characters exactly? @example br @@ -2025,13 +2028,20 @@ end-list @@_ @end example -@findex \A -You can test whether an identifier is valid in @code{gtroff} with the -@code{\A} escape. It expands to@w{ }1 or@w{ }0 according to whether its -argument (given in quotes) is or is not acceptable as the name of a -string, macro, diversion, number register, environment, or font. It -will return@w{ }0 if no argument is given. This is useful if you want -to look up user input in some sort of associative table. +@deffn Escape \A ident +You can test whether an identifier @var{ident} is valid in @code{gtroff} +with the @code{\A} escape. It expands to the character@w{ }1 or@w{ }0 +according to whether its argument (given in quotes) is or is not +acceptable as the name of a string, macro, diversion, number register, +environment, or font. It will return@w{ }0 if no argument is given. +This is useful if you want to look up user input in some sort of +associative table. + +@example +\A'end-list' + @result{} 1 +@end example +@end deffn @c XXX add xrefs above @@ -2098,9 +2108,12 @@ A request line begins with a control character, which is either a single quote (@samp{'}) or a period (@samp{.}). These can be changed; @xref{Character Translations}, for details. After this there may be optional tabs or spaces followed by an identifier which is the name of -the request. This may be followed by any number of space separated +the request. This may be followed by any number of space-separated arguments. +@cindex zero width space character +@cindex character, zero width space +@cindex space character, zero width @findex \& If you want to begin a line with a control character without it being interpreted, precede it with @code{\&}. This represents a zero width @@ -2124,8 +2137,6 @@ The line is split into arguments according to spaces. An argument which is intended to contain spaces can either be enclosed in quotes (single or double), or have the spaces @dfn{escaped} with backslashes. -So, for example: - @example .uh The Mouse Problem .uh "The Mouse Problem" @@ -2138,9 +2149,9 @@ The first line is the @code{uh} macro being called with 3 arguments, same effect or calling the @code{uh} macro with one argument @samp{The Mouse Problem}. +@findex ds Note, however, that the @code{ds} request works differently. - -@xref{Strings}. +@xref{Strings}, for more details. @node Macros, Escapes, Requests, Embedded Commands @subsection Macros @@ -2156,23 +2167,31 @@ requests---arguments also may be passed in the same manner. @subsection Escapes @cindex escapes -@findex \e -@findex \\ Escapes may occur anywhere in the input to @code{gtroff}. They begin -with a backslash and are followed by a single character which indicates -the function to be performed. If you want to have a backslash appear in -your document, you should use the escape sequence @code{\e}. Merely -escaping the backslash with another backslash will work in @emph{some} -circumstances. +with a backslash usually and are followed by a single character which +indicates the function to be performed. The escape character can be +changed; @xref{Character Translations}. + +@findex ( +@findex [ +@findex ] +Escape sequences which require an identifier as a parameter accept three +possibilities of syntax. -Many escapes have no parameters; those that do, do so in one of two -ways. For escapes which require an identifier there must be a way for -@code{gtroff} to tell where the identifier ends and the text begins. It -assumes that the next single character is the identifier, but if that -character is an opening parenthesis, it takes the next two characters as -the identifier; and if the next character is an opening bracket, all -characters until a closing bracket are taken as the identifier. Note -that in the second case there is no closing parenthesis. For example: +@itemize @bullet +@item +The next single character is the identifier. +@item +If this single character is an opening parenthesis, take the following +two characters as the identifier. Note that there is no closing +parenthesis after the identifier. +@item +If this single character is an opening bracket, take all characters +until a closing bracket as the identifier. +@end itemize + +@noindent +Examples: @example \fB @@ -2181,15 +2200,147 @@ that in the second case there is no closing parenthesis. For example: @end example @findex ' +@cindex argument delimiting characters +@cindex characters, argument delimiting +@cindex delimiting characters for arguments Other escapes may require several arguments and/or some special format. -In these cases the @dfn{argument} is enclosed in single quotes -@c XXX (not required??) -and the enclosing text is decoded according to what that escape expects. +In such cases the argument is traditionally enclosed in single quotes +(and quotes are always used in this manual for the definitions of the +escape sequences). The enclosed text is then processed according to +what that escape expects. Example: @example \l'1.5i\(bu' @end example +@findex \o +@findex \b +@findex \X +Note that the quote character can be replaced with any other character +which does not occur in the argument (even a newline or a space +character) in the following escapes: @samp{\o}, @samp{\b}, and +@samp{\X}. This makes e.g. + +@example +A caf +\o +e\' + + +in Paris + @result{} A caf@'e in Paris +@end example + +@noindent +possible, but it is better to avoid this feature to avoid confusion. + +@findex \% +@findex \ +@findex \| +@findex \^ +@findex \@{ +@findex \@} +@findex \' +@findex \` +@findex \- +@findex \_ +@findex \! +@findex \? +@findex \@@ +@findex \) +@findex \/ +@findex \, +@findex \& +@findex \~ +@findex \0 +@findex \a +@findex \c +@findex \d +@findex \e +@findex \E +@findex \p +@findex \r +@findex \t +@findex \u +The following escapes sequences (which are handled similar to characters +since they don't take a parameter) are also allowed as delimiters: +@samp{\%}, @samp{\ }, @samp{\|}, @samp{\^}, @samp{\@{}, @samp{\@}}, +@samp{\'}, @samp{\`}, @samp{\-}, @samp{\_}, @samp{\!}, @samp{\?}, +@samp{\@@}, @samp{\)}, @samp{\/}, @samp{\,}, @samp{\&}, @samp{\~}, +@samp{\0}, @samp{\a}, @samp{\c}, @samp{\d}, @samp{\e}, @samp{\E}, +@samp{\p}, @samp{\r}, @samp{\t}, and @samp{\u}. Again, don't use these +if possible. + +@findex \A +@findex \Z +@findex \C +@findex \w +No newline characters as delimiters are allowed in the following +escapes: @samp{\A}, @samp{\Z}, @samp{\C}, and @samp{\w}. + +@findex \D +@findex \h +@findex \H +@findex \l +@findex \L +@findex \N +@findex \R +@findex \s +@findex \S +@findex \v +@findex \x +Finally, the escapes @samp{\D}, @samp{\h}, @samp{\H}, @samp{\l}, +@samp{\L}, @samp{\N}, @samp{\R}, @samp{\s}, @samp{\S}, @samp{\v}, and +@samp{\x} can't use the following characters as delimiters: + +@itemize @bullet +@cindex numbers +@cindex digits +@item +The digits @samp{0}-@samp{9}. +@cindex operators +@findex + +@findex - +@findex / +@findex * +@findex % +@findex < +@findex > +@findex = +@findex & +@findex : +@findex ( +@findex ) +@findex . +@item +The operators @samp{+-/*%<>=&:().}. +@item +@cindex space character +@cindex character, space +@cindex tab character +@cindex character, tab +@cindex newline character +@cindex character, newline +The space, tab, and newline characters. +@findex \% +@findex \@{ +@findex \@} +@findex \' +@findex \` +@findex \- +@findex \_ +@findex \! +@findex \@@ +@findex \/ +@findex \c +@findex \e +@findex \p +@item +All escape sequences except @samp{\%}, @samp{\@{}, @samp{\@}}, +@samp{\'}, @samp{\`}, @samp{\-}, @samp{\_}, @samp{\!}, @samp{\@@}, +@samp{\/}, @samp{\c}, @samp{\e}, and @samp{\p}. +@end itemize + @findex \\ @findex \e @findex \E @@ -3494,6 +3645,8 @@ description file after the charset command. It is possible to include unnamed characters in the font description file by using a name of @samp{---}; the @code{\N} escape sequence is the only way to use these. +@c XXX should be `glyph', not `character' + @findex cflags @cindex character properties @cindex properties of characters @@ -3639,6 +3792,9 @@ What is kerning? @c XXX more info +@cindex zero width space character +@cindex character, zero width space +@cindex space character, zero width If the font description file contains pairwise kerning information, characters from that font will be kerned. Kerning between two characters can be inhibited by placing @code{\&} between them. @@ -4110,6 +4266,9 @@ The preceding example produces: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 @end example +@cindex zero width space character +@cindex character, zero width space +@cindex space character, zero width @findex \& @noindent Note the usage of the @code{\&} escape to avoid a control character at @@ -4340,6 +4499,9 @@ a 1/6th em space. a 1/12th em space. @item \0 a space the size of a digit. +@cindex zero width space character +@cindex character, zero width space +@cindex space character, zero width @item \& A zero width space. @item \) @@ -4458,6 +4620,9 @@ The optional second parameter @var{c} is a character to draw the line with. If this second argument is not specified, troff will use the underscore character. +@cindex zero width space character +@cindex character, zero width space +@cindex space character, zero width @findex \& If you need to separate the two arguments (to prevent troff from interpreting a drawing character as a scaling indicator), you can @@ -5484,8 +5649,8 @@ GNU @code{troff} does not allow the use of the escape sequences @code{\@key{SP}}, @code{\'}, @code{\`}, @code{\-}, @code{\_}, @code{\!}, @code{\%}, and @code{\c} in names of strings, macros, diversions, number registers, fonts or environments; @sc{Unix} @code{troff} does. The -@code{\A} escape sequence may be helpful in avoiding use of these escape -sequences in names. +@code{\A} escape sequence (@pxref{Identifiers}) may be helpful in +avoiding use of these escape sequences in names. @cindex fractional point sizes @cindex point sizes, fractional diff --git a/src/preproc/pic/pic.man b/src/preproc/pic/pic.man index 2b09fe78..311a04e6 100644 --- a/src/preproc/pic/pic.man +++ b/src/preproc/pic/pic.man @@ -1,5 +1,5 @@ .ig \"-*- nroff -*- -Copyright (C) 1989-1999 Free Software Foundation, Inc. +Copyright (C) 1989-2000 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice -- 2.11.4.GIT