From c64882682db39f594bec1cec5a56e943f58220f2 Mon Sep 17 00:00:00 2001
From: edgar_igl <edgar_igl@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Mon, 22 Sep 2008 20:34:18 +0000
Subject: [PATCH] ETRAX-FS: Correct ethernet PHY diagnostics register reads.

* Correct ethernet PHY diagnostics register reads.
* Add friendly names for the speed/duplex fields.
* Report duplex mismatches between MAC and PHY.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5300 c046a42c-6fe2-441c-8c8c-71466251a162
---
 hw/etraxfs_eth.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 4 deletions(-)

diff --git a/hw/etraxfs_eth.c b/hw/etraxfs_eth.c
index 9ef610fd19..507937705b 100644
--- a/hw/etraxfs_eth.c
+++ b/hw/etraxfs_eth.c
@@ -30,6 +30,12 @@
 
 #define D(x)
 
+/* Advertisement control register. */
+#define ADVERTISE_10HALF        0x0020  /* Try for 10mbps half-duplex  */
+#define ADVERTISE_10FULL        0x0040  /* Try for 10mbps full-duplex  */
+#define ADVERTISE_100HALF       0x0080  /* Try for 100mbps half-duplex */
+#define ADVERTISE_100FULL       0x0100  /* Try for 100mbps full-duplex */
+
 /* 
  * The MDIO extensions in the TDK PHY model were reversed engineered from the 
  * linux driver (PHYID and Diagnostics reg).
@@ -78,9 +84,12 @@ static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
 			int speed_100 = 0;
 
 			/* Are we advertising 100 half or 100 duplex ? */
-			speed_100 = !!(phy->regs[4] & 0x180);
+			speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
+			speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
+
 			/* Are we advertising 10 duplex or 100 duplex ? */
-			duplex = !!(phy->regs[4] & 0x180);
+			duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
+			duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
 			r = (speed_100 << 10) | (duplex << 11);
 		}
 		break;
@@ -322,10 +331,40 @@ struct fs_eth
 
 	/* MDIO bus.  */
 	struct qemu_mdio mdio_bus;
+	unsigned int phyaddr;
+	int duplex_mismatch;
+
 	/* PHY.	 */
 	struct qemu_phy phy;
 };
 
+static void eth_validate_duplex(struct fs_eth *eth)
+{
+	struct qemu_phy *phy;
+	unsigned int phy_duplex;
+	unsigned int mac_duplex;
+	int new_mm = 0;
+
+	phy = eth->mdio_bus.devs[eth->phyaddr];
+	phy_duplex = !!(phy->read(phy, 18) & (1 << 11));
+	mac_duplex = !!(eth->regs[RW_REC_CTRL] & 128);
+
+	if (mac_duplex != phy_duplex)
+		new_mm = 1;
+
+	if (eth->regs[RW_GEN_CTRL] & 1) {
+		if (new_mm != eth->duplex_mismatch) {
+			if (new_mm)
+				printf("HW: WARNING "
+				       "ETH duplex mismatch MAC=%d PHY=%d\n",
+				       mac_duplex, phy_duplex);
+			else
+				printf("HW: ETH duplex ok.\n");
+		}
+		eth->duplex_mismatch = new_mm;
+	}
+}
+
 static uint32_t eth_rinvalid (void *opaque, target_phys_addr_t addr)
 {
 	struct fs_eth *eth = opaque;
@@ -418,11 +457,18 @@ eth_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
 			/* Attach an MDIO/PHY abstraction.  */
 			if (value & 2)
 				eth->mdio_bus.mdio = value & 1;
-			if (eth->mdio_bus.mdc != (value & 4))
+			if (eth->mdio_bus.mdc != (value & 4)) {
 				mdio_cycle(&eth->mdio_bus);
+				eth_validate_duplex(eth);
+			}
 			eth->mdio_bus.mdc = !!(value & 4);
 			break;
 
+		case RW_REC_CTRL:
+			eth->regs[addr] = value;
+			eth_validate_duplex(eth);
+			break;
+
 		default:
 			eth->regs[addr] = value;
 			D(printf ("%s %x %x\n",
@@ -591,8 +637,9 @@ void *etraxfs_eth_init(NICInfo *nd, CPUState *env,
 	eth->dma_in = dma + 1;
 
 	/* Connect the phy.  */
+	eth->phyaddr = 1;
 	tdk_init(&eth->phy);
-	mdio_attach(&eth->mdio_bus, &eth->phy, 0x1);
+	mdio_attach(&eth->mdio_bus, &eth->phy, eth->phyaddr);
 
 	eth->ethregs = cpu_register_io_memory(0, eth_read, eth_write, eth);
 	cpu_register_physical_memory (base, 0x5c, eth->ethregs);
-- 
2.11.4.GIT