From c8cb19876d3e29bffd7ffd87586ff451f97f5f46 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Wed, 25 May 2022 09:21:22 +0200 Subject: [PATCH] hw/sd/sdcard: Support boot area in emmc image MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This assumes a specially constructed image: $ dd if=/dev/zero of=mmc-bootarea.img count=2 bs=1M $ dd if=u-boot-spl.bin of=mmc-bootarea.img conv=notrunc $ dd if=u-boot.bin of=mmc-bootarea.img conv=notrunc count=64 bs=1K $ cat mmc-bootarea.img obmc-phosphor-image.wic > mmc.img $ truncate --size 16GB mmc.img For now this still requires a mtd image to load the SPL: $ qemu-system-arm -M tacoma-bmc -nographic \ -global driver=sd-card,property=emmc,value=true \ -drive file=mmc.img,if=sd,index=2,format=raw Signed-off-by: Joel Stanley Signed-off-by: Cédric Le Goater Signed-off-by: Philippe Mathieu-Daudé Message-Id: <20240712162719.88165-12-philmd@linaro.org> --- hw/sd/sd.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/hw/sd/sd.c b/hw/sd/sd.c index 1f16c16fd1..07cb97d88c 100644 --- a/hw/sd/sd.c +++ b/hw/sd/sd.c @@ -137,6 +137,7 @@ struct SDState { uint8_t spec_version; uint64_t boot_part_size; BlockBackend *blk; + uint8_t boot_config; const SDProto *proto; @@ -513,6 +514,9 @@ static void emmc_set_ext_csd(SDState *sd, uint64_t size) sd->ext_csd[EXT_CSD_CARD_TYPE] = 0b11; sd->ext_csd[EXT_CSD_STRUCTURE] = 2; sd->ext_csd[EXT_CSD_REV] = 3; + + /* Mode segment (RW) */ + sd->ext_csd[EXT_CSD_PART_CONFIG] = sd->boot_config; } static void emmc_set_csd(SDState *sd, uint64_t size) @@ -763,6 +767,40 @@ static uint32_t sd_blk_len(SDState *sd) return sd->blk_len; } +/* + * This requires a disk image that has two boot partitions inserted at the + * beginning of it. The size of the boot partitions is the "boot-size" + * property. + */ +static uint32_t sd_bootpart_offset(SDState *sd) +{ + bool partitions_enabled; + unsigned partition_access; + + if (!sd->boot_part_size || !sd_is_emmc(sd)) { + return 0; + } + + partitions_enabled = sd->ext_csd[EXT_CSD_PART_CONFIG] + & EXT_CSD_PART_CONFIG_EN_MASK; + if (!partitions_enabled) { + return 0; + } + + partition_access = sd->ext_csd[EXT_CSD_PART_CONFIG] + & EXT_CSD_PART_CONFIG_ACC_MASK; + switch (partition_access) { + case EXT_CSD_PART_CONFIG_ACC_DEFAULT: + return sd->boot_part_size * 2; + case EXT_CSD_PART_CONFIG_ACC_BOOT0: + return 0; + case EXT_CSD_PART_CONFIG_ACC_BOOT0 + 1: + return sd->boot_part_size * 1; + default: + g_assert_not_reached(); + } +} + static uint64_t sd_req_get_address(SDState *sd, SDRequest req) { uint64_t addr; @@ -795,6 +833,7 @@ static void sd_reset(DeviceState *dev) sect = 0; } size = sect << HWBLOCK_SHIFT; + size -= sd_bootpart_offset(sd); sect = sd_addr_to_wpnum(size) + 1; @@ -1003,6 +1042,7 @@ void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert) static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len) { trace_sdcard_read_block(addr, len); + addr += sd_bootpart_offset(sd); if (!sd->blk || blk_pread(sd->blk, addr, len, sd->data, 0) < 0) { fprintf(stderr, "sd_blk_read: read error on host side\n"); } @@ -1011,6 +1051,7 @@ static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len) static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len) { trace_sdcard_write_block(addr, len); + addr += sd_bootpart_offset(sd); if (!sd->blk || blk_pwrite(sd->blk, addr, len, sd->data, 0) < 0) { fprintf(stderr, "sd_blk_write: write error on host side\n"); } @@ -2763,6 +2804,7 @@ static Property sd_properties[] = { static Property emmc_properties[] = { DEFINE_PROP_UINT64("boot-partition-size", SDState, boot_part_size, 0), + DEFINE_PROP_UINT8("boot-config", SDState, boot_config, 0x0), DEFINE_PROP_END_OF_LIST() }; -- 2.11.4.GIT