From 897d27260a7eaccbf4ff01e49021205c5616c8ef Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Thu, 3 Sep 2020 21:20:46 +0100 Subject: [PATCH] hw/arm/mps2: New board model mps2-an386 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Implement a model of the MPS2 with the AN386 firmware. This is essentially identical to the AN385 firmware, but it has a Cortex-M4 rather than a Cortex-M3. Signed-off-by: Peter Maydell Reviewed-by: Richard Henderson Reviewed-by: Philippe Mathieu-Daudé Message-id: 20200903202048.15370-2-peter.maydell@linaro.org --- docs/system/arm/mps2.rst | 8 +++++--- hw/arm/mps2.c | 34 +++++++++++++++++++++++++++++----- 2 files changed, 34 insertions(+), 8 deletions(-) diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst index 3a98cb59b0..e680a4ceb7 100644 --- a/docs/system/arm/mps2.rst +++ b/docs/system/arm/mps2.rst @@ -1,5 +1,5 @@ -Arm MPS2 boards (``mps2-an385``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``) -================================================================================ +Arm MPS2 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``) +================================================================================================ These board models all use Arm M-profile CPUs. @@ -12,6 +12,8 @@ QEMU models the following FPGA images: ``mps2-an385`` Cortex-M3 as documented in ARM Application Note AN385 +``mps2-an386`` + Cortex-M4 as documented in ARM Application Note AN386 ``mps2-an511`` Cortex-M3 'DesignStart' as documented in AN511 ``mps2-an505`` @@ -21,7 +23,7 @@ QEMU models the following FPGA images: Differences between QEMU and real hardware: -- AN385 remapping of low 16K of memory to either ZBT SSRAM1 or to +- AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to block RAM is unimplemented (QEMU always maps this to ZBT SSRAM1, as if zbt_boot_ctrl is always zero) - QEMU provides a LAN9118 ethernet rather than LAN9220; the only guest diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index 4ee5c38459..d3ec73fbe7 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -15,6 +15,7 @@ * as seen by the guest depend significantly on the FPGA image. * We model the following FPGA images: * "mps2-an385" -- Cortex-M3 as documented in ARM Application Note AN385 + * "mps2-an386" -- Cortex-M4 as documented in ARM Application Note AN386 * "mps2-an511" -- Cortex-M3 'DesignStart' as documented in AN511 * * Links to the TRM for the board itself and to the various Application @@ -48,6 +49,7 @@ typedef enum MPS2FPGAType { FPGA_AN385, + FPGA_AN386, FPGA_AN511, } MPS2FPGAType; @@ -82,6 +84,7 @@ typedef struct MPS2MachineState MPS2MachineState; #define TYPE_MPS2_MACHINE "mps2" #define TYPE_MPS2_AN385_MACHINE MACHINE_TYPE_NAME("mps2-an385") +#define TYPE_MPS2_AN386_MACHINE MACHINE_TYPE_NAME("mps2-an386") #define TYPE_MPS2_AN511_MACHINE MACHINE_TYPE_NAME("mps2-an511") DECLARE_OBJ_CHECKERS(MPS2MachineState, MPS2MachineClass, @@ -139,9 +142,9 @@ static void mps2_common_init(MachineState *machine) * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily * call the 16MB our "system memory", as it's the largest lump. * - * Common to both boards: - * 0x21000000..0x21ffffff : PSRAM (16MB) - * AN385 only: + * AN385/AN386/AN511: + * 0x21000000 .. 0x21ffffff : PSRAM (16MB) + * AN385/AN386 only: * 0x00000000 .. 0x003fffff : ZBT SSRAM1 * 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1 * 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3 @@ -156,7 +159,7 @@ static void mps2_common_init(MachineState *machine) * 0x20000000 .. 0x2001ffff : SRAM * 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3 * - * The AN385 has a feature where the lowest 16K can be mapped + * The AN385/AN386 has a feature where the lowest 16K can be mapped * either to the bottom of the ZBT SSRAM1 or to the block RAM. * This is of no use for QEMU so we don't implement it (as if * zbt_boot_ctrl is always zero). @@ -165,6 +168,7 @@ static void mps2_common_init(MachineState *machine) switch (mmc->fpga_type) { case FPGA_AN385: + case FPGA_AN386: make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000); make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000); make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000); @@ -192,6 +196,7 @@ static void mps2_common_init(MachineState *machine) armv7m = DEVICE(&mms->armv7m); switch (mmc->fpga_type) { case FPGA_AN385: + case FPGA_AN386: qdev_prop_set_uint32(armv7m, "num-irq", 32); break; case FPGA_AN511: @@ -228,6 +233,7 @@ static void mps2_common_init(MachineState *machine) switch (mmc->fpga_type) { case FPGA_AN385: + case FPGA_AN386: { /* The overflow IRQs for UARTs 0, 1 and 2 are ORed together. * Overflow for UARTs 4 and 5 doesn't trigger any interrupt. @@ -379,7 +385,7 @@ static void mps2_common_init(MachineState *machine) */ lan9118_init(&nd_table[0], 0x40200000, qdev_get_gpio_in(armv7m, - mmc->fpga_type == FPGA_AN385 ? 13 : 47)); + mmc->fpga_type == FPGA_AN511 ? 47 : 13)); system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ; @@ -408,6 +414,17 @@ static void mps2_an385_class_init(ObjectClass *oc, void *data) mmc->scc_id = 0x41043850; } +static void mps2_an386_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc); + + mc->desc = "ARM MPS2 with AN386 FPGA image for Cortex-M4"; + mmc->fpga_type = FPGA_AN386; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4"); + mmc->scc_id = 0x41043860; +} + static void mps2_an511_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -434,6 +451,12 @@ static const TypeInfo mps2_an385_info = { .class_init = mps2_an385_class_init, }; +static const TypeInfo mps2_an386_info = { + .name = TYPE_MPS2_AN386_MACHINE, + .parent = TYPE_MPS2_MACHINE, + .class_init = mps2_an386_class_init, +}; + static const TypeInfo mps2_an511_info = { .name = TYPE_MPS2_AN511_MACHINE, .parent = TYPE_MPS2_MACHINE, @@ -444,6 +467,7 @@ static void mps2_machine_init(void) { type_register_static(&mps2_info); type_register_static(&mps2_an385_info); + type_register_static(&mps2_an386_info); type_register_static(&mps2_an511_info); } -- 2.11.4.GIT