Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210330' into...
[qemu/ar7.git] / hw / ide / via.c
blobbe09912b33440da55ef210587fbee6207155d775
1 /*
2 * QEMU IDE Emulation: PCI VIA82C686B support.
4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
6 * Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com>
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 * THE SOFTWARE.
27 #include "qemu/osdep.h"
28 #include "hw/pci/pci.h"
29 #include "migration/vmstate.h"
30 #include "qemu/module.h"
31 #include "sysemu/dma.h"
33 #include "hw/ide/pci.h"
34 #include "trace.h"
36 static uint64_t bmdma_read(void *opaque, hwaddr addr,
37 unsigned size)
39 BMDMAState *bm = opaque;
40 uint32_t val;
42 if (size != 1) {
43 return ((uint64_t)1 << (size * 8)) - 1;
46 switch (addr & 3) {
47 case 0:
48 val = bm->cmd;
49 break;
50 case 2:
51 val = bm->status;
52 break;
53 default:
54 val = 0xff;
55 break;
58 trace_bmdma_read_via(addr, val);
59 return val;
62 static void bmdma_write(void *opaque, hwaddr addr,
63 uint64_t val, unsigned size)
65 BMDMAState *bm = opaque;
67 if (size != 1) {
68 return;
71 trace_bmdma_write_via(addr, val);
72 switch (addr & 3) {
73 case 0:
74 bmdma_cmd_writeb(bm, val);
75 break;
76 case 2:
77 bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
78 break;
79 default:;
83 static const MemoryRegionOps via_bmdma_ops = {
84 .read = bmdma_read,
85 .write = bmdma_write,
88 static void bmdma_setup_bar(PCIIDEState *d)
90 int i;
92 memory_region_init(&d->bmdma_bar, OBJECT(d), "via-bmdma-container", 16);
93 for(i = 0;i < 2; i++) {
94 BMDMAState *bm = &d->bmdma[i];
96 memory_region_init_io(&bm->extra_io, OBJECT(d), &via_bmdma_ops, bm,
97 "via-bmdma", 4);
98 memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
99 memory_region_init_io(&bm->addr_ioport, OBJECT(d),
100 &bmdma_addr_ioport_ops, bm, "bmdma", 4);
101 memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
105 static void via_ide_set_irq(void *opaque, int n, int level)
107 PCIDevice *d = PCI_DEVICE(opaque);
109 if (level) {
110 d->config[0x70 + n * 8] |= 0x80;
111 } else {
112 d->config[0x70 + n * 8] &= ~0x80;
115 qemu_set_irq(isa_get_irq(NULL, 14 + n), level);
118 static void via_ide_reset(DeviceState *dev)
120 PCIIDEState *d = PCI_IDE(dev);
121 PCIDevice *pd = PCI_DEVICE(dev);
122 uint8_t *pci_conf = pd->config;
123 int i;
125 for (i = 0; i < 2; i++) {
126 ide_bus_reset(&d->bus[i]);
129 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_WAIT);
130 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
131 PCI_STATUS_DEVSEL_MEDIUM);
133 pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
134 pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4);
135 pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
136 pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374);
137 pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */
138 pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
140 /* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
141 pci_set_long(pci_conf + 0x40, 0x0a090600);
142 /* IDE misc configuration 1/2/3 */
143 pci_set_long(pci_conf + 0x44, 0x00c00068);
144 /* IDE Timing control */
145 pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
146 /* IDE Address Setup Time */
147 pci_set_long(pci_conf + 0x4c, 0x000000ff);
148 /* UltraDMA Extended Timing Control*/
149 pci_set_long(pci_conf + 0x50, 0x07070707);
150 /* UltraDMA FIFO Control */
151 pci_set_long(pci_conf + 0x54, 0x00000004);
152 /* IDE primary sector size */
153 pci_set_long(pci_conf + 0x60, 0x00000200);
154 /* IDE secondary sector size */
155 pci_set_long(pci_conf + 0x68, 0x00000200);
156 /* PCI PM Block */
157 pci_set_long(pci_conf + 0xc0, 0x00020001);
160 static void via_ide_realize(PCIDevice *dev, Error **errp)
162 PCIIDEState *d = PCI_IDE(dev);
163 DeviceState *ds = DEVICE(dev);
164 uint8_t *pci_conf = dev->config;
165 int i;
167 pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy mode */
168 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
169 dev->wmask[PCI_INTERRUPT_LINE] = 0;
170 dev->wmask[PCI_CLASS_PROG] = 5;
172 memory_region_init_io(&d->data_bar[0], OBJECT(d), &pci_ide_data_le_ops,
173 &d->bus[0], "via-ide0-data", 8);
174 pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[0]);
176 memory_region_init_io(&d->cmd_bar[0], OBJECT(d), &pci_ide_cmd_le_ops,
177 &d->bus[0], "via-ide0-cmd", 4);
178 pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[0]);
180 memory_region_init_io(&d->data_bar[1], OBJECT(d), &pci_ide_data_le_ops,
181 &d->bus[1], "via-ide1-data", 8);
182 pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[1]);
184 memory_region_init_io(&d->cmd_bar[1], OBJECT(d), &pci_ide_cmd_le_ops,
185 &d->bus[1], "via-ide1-cmd", 4);
186 pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[1]);
188 bmdma_setup_bar(d);
189 pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
191 qdev_init_gpio_in(ds, via_ide_set_irq, 2);
192 for (i = 0; i < 2; i++) {
193 ide_bus_new(&d->bus[i], sizeof(d->bus[i]), ds, i, 2);
194 ide_init2(&d->bus[i], qdev_get_gpio_in(ds, i));
196 bmdma_init(&d->bus[i], &d->bmdma[i], d);
197 d->bmdma[i].bus = &d->bus[i];
198 ide_register_restart_cb(&d->bus[i]);
202 static void via_ide_exitfn(PCIDevice *dev)
204 PCIIDEState *d = PCI_IDE(dev);
205 unsigned i;
207 for (i = 0; i < 2; ++i) {
208 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
209 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
213 static void via_ide_class_init(ObjectClass *klass, void *data)
215 DeviceClass *dc = DEVICE_CLASS(klass);
216 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
218 dc->reset = via_ide_reset;
219 dc->vmsd = &vmstate_ide_pci;
220 k->realize = via_ide_realize;
221 k->exit = via_ide_exitfn;
222 k->vendor_id = PCI_VENDOR_ID_VIA;
223 k->device_id = PCI_DEVICE_ID_VIA_IDE;
224 k->revision = 0x06;
225 k->class_id = PCI_CLASS_STORAGE_IDE;
226 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
229 static const TypeInfo via_ide_info = {
230 .name = "via-ide",
231 .parent = TYPE_PCI_IDE,
232 .class_init = via_ide_class_init,
235 static void via_ide_register_types(void)
237 type_register_static(&via_ide_info);
240 type_init(via_ide_register_types)