From a879306ca14de576d3a5dd51f830ebf89753e223 Mon Sep 17 00:00:00 2001 From: Mark Cave-Ayland Date: Sat, 19 Dec 2020 11:19:34 +0000 Subject: [PATCH] sun4m: don't connect two qemu_irqs directly to the same input The sun4m board code connects both of the IRQ outputs of each ESCC to the same slavio input qemu_irq. Connecting two qemu_irqs outputs directly to the same input is not valid as it produces subtly wrong behaviour (for instance if both the IRQ lines are high, and then one goes low, the PIC input will see this as a high-to-low transition even though the second IRQ line should still be holding it high). This kind of wiring needs an explicitly created OR gate; add one. Signed-off-by: Mark Cave-Ayland Message-Id: <20201219111934.5540-1-mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko Signed-off-by: Mark Cave-Ayland --- hw/sparc/Kconfig | 1 + hw/sparc/sun4m.c | 24 +++++++++++++++++++----- 2 files changed, 20 insertions(+), 5 deletions(-) diff --git a/hw/sparc/Kconfig b/hw/sparc/Kconfig index 91805afab6..8dcb10086f 100644 --- a/hw/sparc/Kconfig +++ b/hw/sparc/Kconfig @@ -14,6 +14,7 @@ config SUN4M select M48T59 select STP2000 select CHRP_NVRAM + select OR_IRQ config LEON3 bool diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c index 8686371318..38ca1e33c7 100644 --- a/hw/sparc/sun4m.c +++ b/hw/sparc/sun4m.c @@ -50,6 +50,7 @@ #include "hw/misc/empty_slot.h" #include "hw/misc/unimp.h" #include "hw/irq.h" +#include "hw/or-irq.h" #include "hw/loader.h" #include "elf.h" #include "trace.h" @@ -848,7 +849,7 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef, uint32_t initrd_size; DriveInfo *fd[MAX_FD]; FWCfgState *fw_cfg; - DeviceState *dev; + DeviceState *dev, *ms_kb_orgate, *serial_orgate; SysBusDevice *s; unsigned int smp_cpus = machine->smp.cpus; unsigned int max_cpus = machine->smp.max_cpus; @@ -994,10 +995,16 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef, qdev_prop_set_uint32(dev, "chnAtype", escc_kbd); s = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(s, &error_fatal); - sysbus_connect_irq(s, 0, slavio_irq[14]); - sysbus_connect_irq(s, 1, slavio_irq[14]); sysbus_mmio_map(s, 0, hwdef->ms_kb_base); + /* Logically OR both its IRQs together */ + ms_kb_orgate = DEVICE(object_new(TYPE_OR_IRQ)); + object_property_set_int(OBJECT(ms_kb_orgate), "num-lines", 2, &error_fatal); + qdev_realize_and_unref(ms_kb_orgate, NULL, &error_fatal); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(ms_kb_orgate, 0)); + sysbus_connect_irq(s, 1, qdev_get_gpio_in(ms_kb_orgate, 1)); + qdev_connect_gpio_out(DEVICE(ms_kb_orgate), 0, slavio_irq[14]); + dev = qdev_new(TYPE_ESCC); qdev_prop_set_uint32(dev, "disabled", 0); qdev_prop_set_uint32(dev, "frequency", ESCC_CLOCK); @@ -1009,10 +1016,17 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef, s = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(s, &error_fatal); - sysbus_connect_irq(s, 0, slavio_irq[15]); - sysbus_connect_irq(s, 1, slavio_irq[15]); sysbus_mmio_map(s, 0, hwdef->serial_base); + /* Logically OR both its IRQs together */ + serial_orgate = DEVICE(object_new(TYPE_OR_IRQ)); + object_property_set_int(OBJECT(serial_orgate), "num-lines", 2, + &error_fatal); + qdev_realize_and_unref(serial_orgate, NULL, &error_fatal); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(serial_orgate, 0)); + sysbus_connect_irq(s, 1, qdev_get_gpio_in(serial_orgate, 1)); + qdev_connect_gpio_out(DEVICE(serial_orgate), 0, slavio_irq[15]); + if (hwdef->apc_base) { apc_init(hwdef->apc_base, qemu_allocate_irq(cpu_halt_signal, NULL, 0)); } -- 2.11.4.GIT