From 683754c7b61f9e2ff098720ec80c9ab86c54663d Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Thu, 12 Aug 2021 10:33:56 +0100 Subject: [PATCH] arm: Remove system_clock_scale global All the devices that used to use system_clock_scale have now been converted to use Clock inputs instead, so the global is no longer needed; remove it and all the code that sets it. Signed-off-by: Peter Maydell Reviewed-by: Alistair Francis Message-id: 20210812093356.1946-26-peter.maydell@linaro.org --- hw/arm/armsse.c | 17 +---------------- hw/arm/mps2.c | 2 -- hw/arm/msf2-soc.c | 2 -- hw/arm/netduino2.c | 2 -- hw/arm/netduinoplus2.c | 2 -- hw/arm/nrf51_soc.c | 2 -- hw/arm/stellaris.c | 7 ++++--- hw/arm/stm32vldiscovery.c | 2 -- hw/timer/armv7m_systick.c | 2 -- include/hw/timer/armv7m_systick.h | 22 ---------------------- 10 files changed, 5 insertions(+), 55 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index 70b52c3d4b..aecdeb9815 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -689,17 +689,6 @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } -static void armsse_mainclk_update(void *opaque, ClockEvent event) -{ - ARMSSE *s = ARM_SSE(opaque); - - /* - * Set system_clock_scale from our Clock input; this is what - * controls the tick rate of the CPU SysTick timer. - */ - system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); -} - static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -711,8 +700,7 @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", - armsse_mainclk_update, s, ClockUpdate); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL, 0); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL, 0); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -1654,9 +1642,6 @@ static void armsse_realize(DeviceState *dev, Error **errp) * devices in the ARMSSE. */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - - /* Set initial system_clock_scale from MAINCLK */ - armsse_mainclk_update(s, ClockUpdate); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index 3671f49ad7..4634aa1a1c 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -439,8 +439,6 @@ static void mps2_common_init(MachineState *machine) qdev_get_gpio_in(armv7m, mmc->fpga_type == FPGA_AN511 ? 47 : 13)); - system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ; - armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename, 0x400000); } diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c index dbc6d936a7..b5fe9f364d 100644 --- a/hw/arm/msf2-soc.c +++ b/hw/arm/msf2-soc.c @@ -144,8 +144,6 @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp) return; } - system_clock_scale = clock_ticks_to_ns(s->m3clk, 1); - for (i = 0; i < MSF2_NUM_UARTS; i++) { if (serial_hd(i)) { serial_mm_init(get_system_memory(), uart_addr[i], 2, diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c index b5c0ba23ee..3365da11bf 100644 --- a/hw/arm/netduino2.c +++ b/hw/arm/netduino2.c @@ -39,8 +39,6 @@ static void netduino2_init(MachineState *machine) DeviceState *dev; Clock *sysclk; - system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ; - /* This clock doesn't need migration because it is fixed-frequency */ sysclk = clock_new(OBJECT(machine), "SYSCLK"); clock_set_hz(sysclk, SYSCLK_FRQ); diff --git a/hw/arm/netduinoplus2.c b/hw/arm/netduinoplus2.c index a5a8999cc8..76cea8e489 100644 --- a/hw/arm/netduinoplus2.c +++ b/hw/arm/netduinoplus2.c @@ -39,8 +39,6 @@ static void netduinoplus2_init(MachineState *machine) DeviceState *dev; Clock *sysclk; - system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ; - /* This clock doesn't need migration because it is fixed-frequency */ sysclk = clock_new(OBJECT(machine), "SYSCLK"); clock_set_hz(sysclk, SYSCLK_FRQ); diff --git a/hw/arm/nrf51_soc.c b/hw/arm/nrf51_soc.c index e3e849a32b..34da0d62f0 100644 --- a/hw/arm/nrf51_soc.c +++ b/hw/arm/nrf51_soc.c @@ -84,8 +84,6 @@ static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) * will always provide one). */ - system_clock_scale = NANOSECONDS_PER_SECOND / HCLK_FRQ; - object_property_set_link(OBJECT(&s->cpu), "memory", OBJECT(&s->container), &error_abort); if (!sysbus_realize(SYS_BUS_DEVICE(&s->cpu), errp)) { diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index 3e7d1dabad..78827ace6b 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -263,17 +263,18 @@ static bool ssys_use_rcc2(ssys_state *s) */ static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + int period_ns; /* * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input * clock is 200MHz, which is a period of 5 ns. Dividing the clock * frequency by X is the same as multiplying the period by X. */ if (ssys_use_rcc2(s)) { - system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); + period_ns = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { - system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); + period_ns = 5 * (((s->rcc >> 23) & 0xf) + 1); } - clock_set_ns(s->sysclk, system_clock_scale); + clock_set_ns(s->sysclk, period_ns); if (propagate_clock) { clock_propagate(s->sysclk); } diff --git a/hw/arm/stm32vldiscovery.c b/hw/arm/stm32vldiscovery.c index 9b79004703..04036da3ee 100644 --- a/hw/arm/stm32vldiscovery.c +++ b/hw/arm/stm32vldiscovery.c @@ -42,8 +42,6 @@ static void stm32vldiscovery_init(MachineState *machine) DeviceState *dev; Clock *sysclk; - system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ; - /* This clock doesn't need migration because it is fixed-frequency */ sysclk = clock_new(OBJECT(machine), "SYSCLK"); clock_set_hz(sysclk, SYSCLK_FRQ); diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c index 21f6d0fd24..3bd951dd04 100644 --- a/hw/timer/armv7m_systick.c +++ b/hw/timer/armv7m_systick.c @@ -30,8 +30,6 @@ #define SYSCALIB_SKEW (1U << 30) #define SYSCALIB_TENMS ((1U << 24) - 1) -int system_clock_scale; - static void systick_set_period_from_clock(SysTickState *s) { /* diff --git a/include/hw/timer/armv7m_systick.h b/include/hw/timer/armv7m_systick.h index 38adf8d274..ee09b13881 100644 --- a/include/hw/timer/armv7m_systick.h +++ b/include/hw/timer/armv7m_systick.h @@ -47,26 +47,4 @@ struct SysTickState { Clock *cpuclk; }; -/* - * Multiplication factor to convert from system clock ticks to qemu timer - * ticks. This should be set (by board code, usually) to a value - * equal to NANOSECONDS_PER_SECOND / frq, where frq is the clock frequency - * in Hz of the CPU. - * - * This value is used by the systick device when it is running in - * its "use the CPU clock" mode (ie when SYST_CSR.CLKSOURCE == 1) to - * set how fast the timer should tick. - * - * TODO: we should refactor this so that rather than using a global - * we use a device property or something similar. This is complicated - * because (a) the property would need to be plumbed through from the - * board code down through various layers to the systick device - * and (b) the property needs to be modifiable after realize, because - * the stellaris board uses this to implement the behaviour where the - * guest can reprogram the PLL registers to downclock the CPU, and the - * systick device needs to react accordingly. Possibly this should - * be deferred until we have a good API for modelling clock trees. - */ -extern int system_clock_scale; - #endif -- 2.11.4.GIT