From 237c255c6cefefda9c5dd077860cfa20a77d9a6a Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 20 Jan 2015 15:44:59 +0100 Subject: [PATCH] rtl8139: simplify timer logic Pavel Dovgalyuk reports that TimerExpire and the timer are not restored correctly on the receiving end of migration. It is not clear to me whether this is really the case, but we can take the occasion to get rid of the complicated code that computes PCSTimeout on the fly upon changes to IntrStatus/IntrMask. Just always keep a timer running, it will fire every ~130 seconds at most if the interrupt is masked with TimerInt != 0. This makes rtl8139_set_next_tctr_time idempotent (when the virtual clock is stopped between two calls, as is the case during migration). Tested with Frediano's qtest. Signed-off-by: Paolo Bonzini Message-id: 1421765099-26190-1-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi --- hw/net/rtl8139.c | 77 ++++++++++++++++++++------------------------------------ 1 file changed, 27 insertions(+), 50 deletions(-) diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index 6fa9e0aa15..b7b87a60cf 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -508,7 +508,6 @@ typedef struct RTL8139State { /* PCI interrupt timer */ QEMUTimer *timer; - int64_t TimerExpire; MemoryRegion bar_io; MemoryRegion bar_mem; @@ -520,7 +519,7 @@ typedef struct RTL8139State { /* Writes tally counters to memory via DMA */ static void RTL8139TallyCounters_dma_write(RTL8139State *s, dma_addr_t tc_addr); -static void rtl8139_set_next_tctr_time(RTL8139State *s, int64_t current_time); +static void rtl8139_set_next_tctr_time(RTL8139State *s); static void prom9346_decode_command(EEprom9346 *eeprom, uint8_t command) { @@ -1282,6 +1281,7 @@ static void rtl8139_reset(DeviceState *d) s->TCTR = 0; s->TimerInt = 0; s->TCTR_base = 0; + rtl8139_set_next_tctr_time(s); /* reset tally counters */ RTL8139TallyCounters_clear(&s->tally_counters); @@ -2652,7 +2652,6 @@ static void rtl8139_IntrMask_write(RTL8139State *s, uint32_t val) s->IntrMask = val; - rtl8139_set_next_tctr_time(s, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); rtl8139_update_irq(s); } @@ -2687,13 +2686,7 @@ static void rtl8139_IntrStatus_write(RTL8139State *s, uint32_t val) rtl8139_update_irq(s); s->IntrStatus = newStatus; - /* - * Computing if we miss an interrupt here is not that correct but - * considered that we should have had already an interrupt - * and probably emulated is slower is better to assume this resetting was - * done before testing on previous rtl8139_update_irq lead to IRQ losing - */ - rtl8139_set_next_tctr_time(s, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); + rtl8139_set_next_tctr_time(s); rtl8139_update_irq(s); #endif @@ -2701,8 +2694,6 @@ static void rtl8139_IntrStatus_write(RTL8139State *s, uint32_t val) static uint32_t rtl8139_IntrStatus_read(RTL8139State *s) { - rtl8139_set_next_tctr_time(s, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); - uint32_t ret = s->IntrStatus; DPRINTF("IntrStatus read(w) val=0x%04x\n", ret); @@ -2885,43 +2876,32 @@ static void rtl8139_io_writew(void *opaque, uint8_t addr, uint32_t val) } } -static void rtl8139_set_next_tctr_time(RTL8139State *s, int64_t current_time) +static void rtl8139_set_next_tctr_time(RTL8139State *s) { - int64_t pci_time, next_time; - uint32_t low_pci; + const uint64_t ns_per_period = + muldiv64(0x100000000LL, get_ticks_per_sec(), PCI_FREQUENCY); DPRINTF("entered rtl8139_set_next_tctr_time\n"); - if (s->TimerExpire && current_time >= s->TimerExpire) { - s->IntrStatus |= PCSTimeout; - rtl8139_update_irq(s); - } - - /* Set QEMU timer only if needed that is - * - TimerInt <> 0 (we have a timer) - * - mask = 1 (we want an interrupt timer) - * - irq = 0 (irq is not already active) - * If any of above change we need to compute timer again - * Also we must check if timer is passed without QEMU timer + /* This function is called at least once per period, so it is a good + * place to update the timer base. + * + * After one iteration of this loop the value in the Timer register does + * not change, but the device model is counting up by 2^32 ticks (approx. + * 130 seconds). */ - s->TimerExpire = 0; - if (!s->TimerInt) { - return; - } - - pci_time = muldiv64(current_time - s->TCTR_base, PCI_FREQUENCY, - get_ticks_per_sec()); - low_pci = pci_time & 0xffffffff; - pci_time = pci_time - low_pci + s->TimerInt; - if (low_pci >= s->TimerInt) { - pci_time += 0x100000000LL; + while (s->TCTR_base + ns_per_period <= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)) { + s->TCTR_base += ns_per_period; } - next_time = s->TCTR_base + muldiv64(pci_time, get_ticks_per_sec(), - PCI_FREQUENCY); - s->TimerExpire = next_time; - if ((s->IntrMask & PCSTimeout) != 0 && (s->IntrStatus & PCSTimeout) == 0) { - timer_mod(s->timer, next_time); + if (!s->TimerInt) { + timer_del(s->timer); + } else { + uint64_t delta = muldiv64(s->TimerInt, get_ticks_per_sec(), PCI_FREQUENCY); + if (s->TCTR_base + delta <= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)) { + delta += ns_per_period; + } + timer_mod(s->timer, s->TCTR_base + delta); } } @@ -2969,14 +2949,14 @@ static void rtl8139_io_writel(void *opaque, uint8_t addr, uint32_t val) case Timer: DPRINTF("TCTR Timer reset on write\n"); s->TCTR_base = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - rtl8139_set_next_tctr_time(s, s->TCTR_base); + rtl8139_set_next_tctr_time(s); break; case FlashReg: DPRINTF("FlashReg TimerInt write val=0x%08x\n", val); if (s->TimerInt != val) { s->TimerInt = val; - rtl8139_set_next_tctr_time(s, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); + rtl8139_set_next_tctr_time(s); } break; @@ -3253,7 +3233,7 @@ static uint32_t rtl8139_mmio_readl(void *opaque, hwaddr addr) static int rtl8139_post_load(void *opaque, int version_id) { RTL8139State* s = opaque; - rtl8139_set_next_tctr_time(s, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); + rtl8139_set_next_tctr_time(s); if (version_id < 4) { s->cplus_enabled = s->CpCmd != 0; } @@ -3284,8 +3264,7 @@ static void rtl8139_pre_save(void *opaque) RTL8139State* s = opaque; int64_t current_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - /* set IntrStatus correctly */ - rtl8139_set_next_tctr_time(s, current_time); + /* for migration to older versions */ s->TCTR = muldiv64(current_time - s->TCTR_base, PCI_FREQUENCY, get_ticks_per_sec()); s->rtl8139_mmio_io_addr_dummy = 0; @@ -3452,7 +3431,7 @@ static void rtl8139_timer(void *opaque) s->IntrStatus |= PCSTimeout; rtl8139_update_irq(s); - rtl8139_set_next_tctr_time(s, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); + rtl8139_set_next_tctr_time(s); } static void pci_rtl8139_uninit(PCIDevice *dev) @@ -3530,9 +3509,7 @@ static int pci_rtl8139_init(PCIDevice *dev) s->cplus_txbuffer_len = 0; s->cplus_txbuffer_offset = 0; - s->TimerExpire = 0; s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, rtl8139_timer, s); - rtl8139_set_next_tctr_time(s, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); return 0; } -- 2.11.4.GIT