From 13b9414b5798539e2dbb87a570d96184fe21edf4 Mon Sep 17 00:00:00 2001 From: Pavel Butsykin Date: Fri, 22 Jul 2016 11:17:52 +0300 Subject: [PATCH] drive-backup: added support for data compression The idea is simple - backup is "written-once" data. It is written block by block and it is large enough. It would be nice to save storage space and compress it. The patch adds a flag to the qmp/hmp drive-backup command which enables block compression. Compression should be implemented in the format driver to enable this feature. There are some limitations of the format driver to allow compressed writes. We can write data only once. Though for backup this is perfectly fine. These limitations are maintained by the driver and the error will be reported if we are doing something wrong. Signed-off-by: Pavel Butsykin Reviewed-by: Stefan Hajnoczi Signed-off-by: Denis V. Lunev CC: Jeff Cody CC: Markus Armbruster CC: Eric Blake CC: John Snow CC: Stefan Hajnoczi CC: Kevin Wolf Signed-off-by: Kevin Wolf --- block/backup.c | 12 +++++++++++- blockdev.c | 9 ++++++--- hmp-commands.hx | 8 +++++--- hmp.c | 3 +++ include/block/block_int.h | 1 + qapi/block-core.json | 5 ++++- qmp-commands.hx | 5 ++++- 7 files changed, 34 insertions(+), 9 deletions(-) diff --git a/block/backup.c b/block/backup.c index 2c0532314f..bb3bb9a9eb 100644 --- a/block/backup.c +++ b/block/backup.c @@ -47,6 +47,7 @@ typedef struct BackupBlockJob { uint64_t sectors_read; unsigned long *done_bitmap; int64_t cluster_size; + bool compress; NotifierWithReturn before_write; QLIST_HEAD(, CowRequest) inflight_reqs; } BackupBlockJob; @@ -154,7 +155,8 @@ static int coroutine_fn backup_do_cow(BackupBlockJob *job, bounce_qiov.size, BDRV_REQ_MAY_UNMAP); } else { ret = blk_co_pwritev(job->target, start * job->cluster_size, - bounce_qiov.size, &bounce_qiov, 0); + bounce_qiov.size, &bounce_qiov, + job->compress ? BDRV_REQ_WRITE_COMPRESSED : 0); } if (ret < 0) { trace_backup_do_cow_write_fail(job, start, ret); @@ -477,6 +479,7 @@ static void coroutine_fn backup_run(void *opaque) void backup_start(const char *job_id, BlockDriverState *bs, BlockDriverState *target, int64_t speed, MirrorSyncMode sync_mode, BdrvDirtyBitmap *sync_bitmap, + bool compress, BlockdevOnError on_source_error, BlockdevOnError on_target_error, BlockCompletionFunc *cb, void *opaque, @@ -507,6 +510,12 @@ void backup_start(const char *job_id, BlockDriverState *bs, return; } + if (compress && target->drv->bdrv_co_pwritev_compressed == NULL) { + error_setg(errp, "Compression is not supported for this drive %s", + bdrv_get_device_name(target)); + return; + } + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) { return; } @@ -555,6 +564,7 @@ void backup_start(const char *job_id, BlockDriverState *bs, job->sync_mode = sync_mode; job->sync_bitmap = sync_mode == MIRROR_SYNC_MODE_INCREMENTAL ? sync_bitmap : NULL; + job->compress = compress; /* If there is no backing file on the target, we cannot rely on COW if our * backup cluster size is smaller than the target cluster size. Even for diff --git a/blockdev.c b/blockdev.c index 5f1b01518d..f5857d0187 100644 --- a/blockdev.c +++ b/blockdev.c @@ -3132,6 +3132,9 @@ static void do_drive_backup(DriveBackup *backup, BlockJobTxn *txn, Error **errp) if (!backup->has_job_id) { backup->job_id = NULL; } + if (!backup->has_compress) { + backup->compress = false; + } bs = qmp_get_root_bs(backup->device, errp); if (!bs) { @@ -3210,8 +3213,8 @@ static void do_drive_backup(DriveBackup *backup, BlockJobTxn *txn, Error **errp) } backup_start(backup->job_id, bs, target_bs, backup->speed, backup->sync, - bmap, backup->on_source_error, backup->on_target_error, - block_job_cb, bs, txn, &local_err); + bmap, backup->compress, backup->on_source_error, + backup->on_target_error, block_job_cb, bs, txn, &local_err); bdrv_unref(target_bs); if (local_err != NULL) { error_propagate(errp, local_err); @@ -3277,7 +3280,7 @@ void do_blockdev_backup(BlockdevBackup *backup, BlockJobTxn *txn, Error **errp) } } backup_start(backup->job_id, bs, target_bs, backup->speed, backup->sync, - NULL, backup->on_source_error, backup->on_target_error, + NULL, false, backup->on_source_error, backup->on_target_error, block_job_cb, bs, txn, &local_err); if (local_err != NULL) { error_propagate(errp, local_err); diff --git a/hmp-commands.hx b/hmp-commands.hx index 848efee5d1..74f32e515c 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -1182,8 +1182,8 @@ ETEXI { .name = "drive_backup", - .args_type = "reuse:-n,full:-f,device:B,target:s,format:s?", - .params = "[-n] [-f] device target [format]", + .args_type = "reuse:-n,full:-f,compress:-c,device:B,target:s,format:s?", + .params = "[-n] [-f] [-c] device target [format]", .help = "initiates a point-in-time\n\t\t\t" "copy for a device. The device's contents are\n\t\t\t" "copied to the new image file, excluding data that\n\t\t\t" @@ -1191,7 +1191,9 @@ ETEXI "The -n flag requests QEMU to reuse the image found\n\t\t\t" "in new-image-file, instead of recreating it from scratch.\n\t\t\t" "The -f flag requests QEMU to copy the whole disk,\n\t\t\t" - "so that the result does not need a backing file.\n\t\t\t", + "so that the result does not need a backing file.\n\t\t\t" + "The -c flag requests QEMU to compress backup data\n\t\t\t" + "(if the target format supports it).\n\t\t\t", .mhandler.cmd = hmp_drive_backup, }, STEXI diff --git a/hmp.c b/hmp.c index 3c06200e48..a7dfe6fa11 100644 --- a/hmp.c +++ b/hmp.c @@ -1109,6 +1109,7 @@ void hmp_drive_backup(Monitor *mon, const QDict *qdict) const char *format = qdict_get_try_str(qdict, "format"); bool reuse = qdict_get_try_bool(qdict, "reuse", false); bool full = qdict_get_try_bool(qdict, "full", false); + bool compress = qdict_get_try_bool(qdict, "compress", false); Error *err = NULL; DriveBackup backup = { .device = (char *)device, @@ -1118,6 +1119,8 @@ void hmp_drive_backup(Monitor *mon, const QDict *qdict) .sync = full ? MIRROR_SYNC_MODE_FULL : MIRROR_SYNC_MODE_TOP, .has_mode = true, .mode = reuse ? NEW_IMAGE_MODE_EXISTING : NEW_IMAGE_MODE_ABSOLUTE_PATHS, + .has_compress = !!compress, + .compress = compress, }; if (!filename) { diff --git a/include/block/block_int.h b/include/block/block_int.h index 9c61f49f94..0ca6a78eb3 100644 --- a/include/block/block_int.h +++ b/include/block/block_int.h @@ -765,6 +765,7 @@ void mirror_start(const char *job_id, BlockDriverState *bs, void backup_start(const char *job_id, BlockDriverState *bs, BlockDriverState *target, int64_t speed, MirrorSyncMode sync_mode, BdrvDirtyBitmap *sync_bitmap, + bool compress, BlockdevOnError on_source_error, BlockdevOnError on_target_error, BlockCompletionFunc *cb, void *opaque, diff --git a/qapi/block-core.json b/qapi/block-core.json index 4c8cf057b5..300a68b63a 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -898,6 +898,9 @@ # Must be present if sync is "incremental", must NOT be present # otherwise. (Since 2.4) # +# @compress: #optional true to compress data, if the target format supports it. +# (default: false) (since 2.7) +# # @on-source-error: #optional the action to take on an error on the source, # default 'report'. 'stop' and 'enospc' can only be used # if the block device supports io-status (see BlockInfo). @@ -915,7 +918,7 @@ { 'struct': 'DriveBackup', 'data': { '*job-id': 'str', 'device': 'str', 'target': 'str', '*format': 'str', 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode', - '*speed': 'int', '*bitmap': 'str', + '*speed': 'int', '*bitmap': 'str', '*compress': 'bool', '*on-source-error': 'BlockdevOnError', '*on-target-error': 'BlockdevOnError' } } diff --git a/qmp-commands.hx b/qmp-commands.hx index 956f1b0f47..d1593c91ff 100644 --- a/qmp-commands.hx +++ b/qmp-commands.hx @@ -1217,7 +1217,8 @@ EQMP { .name = "drive-backup", .args_type = "job-id:s?,sync:s,device:B,target:s,speed:i?,mode:s?," - "format:s?,bitmap:s?,on-source-error:s?,on-target-error:s?", + "format:s?,bitmap:s?,compress:b?," + "on-source-error:s?,on-target-error:s?", .mhandler.cmd_new = qmp_marshal_drive_backup, }, @@ -1253,6 +1254,8 @@ Arguments: - "mode": whether and how QEMU should create a new image (NewImageMode, optional, default 'absolute-paths') - "speed": the maximum speed, in bytes per second (json-int, optional) +- "compress": true to compress data, if the target format supports it. + (json-bool, optional, default false) - "on-source-error": the action to take on an error on the source, default 'report'. 'stop' and 'enospc' can only be used if the block device supports io-status. -- 2.11.4.GIT