From 6881c1b6d686c91a8cd604bdcd6098ab62d4dcb9 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 10 Nov 2009 09:25:26 -0800
Subject: [PATCH] target.cfg: (re)move some bogus reset_config lines

General rule, this is all board-specific and doesn't belong
in target config files.  Some of these were just cosmetic.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
 tcl/board/atmel_sam3u_ek.cfg | 3 +++
 tcl/target/aduc702x.cfg      | 9 ---------
 tcl/target/at91sam3uXX.cfg   | 2 --
 tcl/target/str730.cfg        | 1 -
 tcl/target/str750.cfg        | 1 -
 5 files changed, 3 insertions(+), 13 deletions(-)

diff --git a/tcl/board/atmel_sam3u_ek.cfg b/tcl/board/atmel_sam3u_ek.cfg
index f7501d000..13d930b1d 100644
--- a/tcl/board/atmel_sam3u_ek.cfg
+++ b/tcl/board/atmel_sam3u_ek.cfg
@@ -1 +1,4 @@
 source [find target/at91sam3u4e.cfg]
+
+reset_config srst_only
+
diff --git a/tcl/target/aduc702x.cfg b/tcl/target/aduc702x.cfg
index f7c5ee434..b60c9679b 100644
--- a/tcl/target/aduc702x.cfg
+++ b/tcl/target/aduc702x.cfg
@@ -1,7 +1,3 @@
-## -*- tcl -*-
-##
-
-
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
 } else {
@@ -21,14 +17,9 @@ if { [info exists CPUTAPID] } {
    set  _CPUTAPID 0x3f0f0f0f
 }
 
-
 jtag_nsrst_delay 200
 jtag_ntrst_delay 200
 
-# This is for the case that TRST/SRST is not wired on your JTAG adaptor.
-# Don't really need them anyways.
-reset_config none
-
 ## JTAG scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
diff --git a/tcl/target/at91sam3uXX.cfg b/tcl/target/at91sam3uXX.cfg
index 985e052ae..b948c64a8 100644
--- a/tcl/target/at91sam3uXX.cfg
+++ b/tcl/target/at91sam3uXX.cfg
@@ -35,8 +35,6 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA
 # 16K is plenty, the smallest chip has this much
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
 
-reset_config srst_only
-
 $_TARGETNAME configure -event gdb-flash-erase-start {
     halt
 }
diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg
index fe70802b9..c98d56c81 100644
--- a/tcl/target/str730.cfg
+++ b/tcl/target/str730.cfg
@@ -21,7 +21,6 @@ if { [info exists CPUTAPID] } {
 }
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
-#reset_config trst_and_srst srst_pulls_trst
 reset_config trst_and_srst srst_pulls_trst
 
 #jtag scan chain
diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg
index 22d87f87d..5439c3351 100644
--- a/tcl/target/str750.cfg
+++ b/tcl/target/str750.cfg
@@ -22,7 +22,6 @@ if { [info exists CPUTAPID] } {
 jtag_khz 10
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
-#reset_config trst_and_srst srst_pulls_trst
 reset_config trst_and_srst srst_pulls_trst
 
 #jtag scan chain
-- 
2.11.4.GIT