From f55b122b42c212fcb3219e372a7361d6573bd6a3 Mon Sep 17 00:00:00 2001 From: Marc Schink Date: Tue, 7 Nov 2023 17:14:09 +0100 Subject: [PATCH] jtag/drivers/kitprog: Restructure commands Use a command group 'kitprog' with subcommands instead of individual commands with 'kitprog_' prefix. The old command is still available to ensure backwards compatibility, but is marked as deprecated. Change-Id: I7f0d447939819ffc488a3d7a8de672b58887127f Signed-off-by: Marc Schink Reviewed-on: https://review.openocd.org/c/openocd/+/7967 Reviewed-by: Bohdan Tymkiv Tested-by: jenkins Reviewed-by: Antonio Borneo --- doc/openocd.texi | 6 +++--- src/jtag/drivers/kitprog.c | 14 +++++++------- src/jtag/startup.tcl | 6 ++++++ 3 files changed, 16 insertions(+), 10 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 40b3c5d1d..5d73fd174 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2991,7 +2991,7 @@ This driver is for Cypress Semiconductor's KitProg adapters. The KitProg is an SWD-only adapter that is designed to be used with Cypress's PSoC and PRoC device families, but it is possible to use it with some other devices. If you are using this adapter with a PSoC or a PRoC, you may need to add -@command{kitprog_init_acquire_psoc} or @command{kitprog acquire_psoc} to your +@command{kitprog init_acquire_psoc} or @command{kitprog acquire_psoc} to your configuration script. Note that this driver is for the proprietary KitProg protocol, not the CMSIS-DAP @@ -3012,14 +3012,14 @@ versions only implement "SWD line reset". Second, due to a firmware quirk, an SWD sequence must be sent after every target reset in order to re-establish communications with the target. @item Due in part to the limitation above, KitProg devices with firmware below -version 2.14 will need to use @command{kitprog_init_acquire_psoc} in order to +version 2.14 will need to use @command{kitprog init_acquire_psoc} in order to communicate with PSoC 5LP devices. This is because, assuming debug is not disabled on the PSoC, the PSoC 5LP needs its JTAG interface switched to SWD mode before communication can begin, but prior to firmware 2.14, "JTAG to SWD" could only be sent with an acquisition sequence. @end itemize -@deffn {Config Command} {kitprog_init_acquire_psoc} +@deffn {Config Command} {kitprog init_acquire_psoc} Indicate that a PSoC acquisition sequence needs to be run during adapter init. Please be aware that the acquisition sequence hard-resets the target. @end deffn diff --git a/src/jtag/drivers/kitprog.c b/src/jtag/drivers/kitprog.c index e126a9c22..c0d2adc10 100644 --- a/src/jtag/drivers/kitprog.c +++ b/src/jtag/drivers/kitprog.c @@ -879,6 +879,13 @@ static const struct command_registration kitprog_subcommand_handlers[] = { .usage = "", .help = "try to acquire a PSoC", }, + { + .name = "init_acquire_psoc", + .handler = &kitprog_handle_init_acquire_psoc_command, + .mode = COMMAND_CONFIG, + .help = "try to acquire a PSoC during init", + .usage = "", + }, COMMAND_REGISTRATION_DONE }; @@ -890,13 +897,6 @@ static const struct command_registration kitprog_command_handlers[] = { .usage = "", .chain = kitprog_subcommand_handlers, }, - { - .name = "kitprog_init_acquire_psoc", - .handler = &kitprog_handle_init_acquire_psoc_command, - .mode = COMMAND_CONFIG, - .help = "try to acquire a PSoC during init", - .usage = "", - }, COMMAND_REGISTRATION_DONE }; diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl index 597a49e95..4eca67771 100644 --- a/src/jtag/startup.tcl +++ b/src/jtag/startup.tcl @@ -1126,6 +1126,12 @@ proc "cmsis_dap_usb" {args} { eval cmsis-dap usb $args } +lappend _telnet_autocomplete_skip "kitprog_init_acquire_psoc" +proc "kitprog_init_acquire_psoc" {} { + echo "DEPRECATED! use 'kitprog init_acquire_psoc', not 'kitprog_init_acquire_psoc'" + eval kitprog init_acquire_psoc +} + lappend _telnet_autocomplete_skip "pld device" proc "pld device" {driver tap_name {opt 0}} { echo "DEPRECATED! use 'pld create ...', not 'pld device ...'" -- 2.11.4.GIT