From cf49e04429202e832ea642d1fdfec9570fd20f17 Mon Sep 17 00:00:00 2001 From: Andreas Fritiofson Date: Wed, 10 Feb 2016 21:37:16 +0100 Subject: [PATCH] adi_v5_swd: Avoid special handling the SELECT cache during connect The cache is forced to zero to match the value expected by the DPIDR read so the connect sequence is not destroyed by a SELECT update. However, DPIDR and in fact all registers except address 4 are independent of the current DPBANKSEL value. Change swd_queue_dp_bankselect() to use this fact and avoid touching SELECT for those registers. Change-Id: I0cd11925fb6adef481bbf45cc24ea2c6dab4b6fb Signed-off-by: Andreas Fritiofson Reviewed-on: http://openocd.zylin.com/3231 Tested-by: jenkins Reviewed-by: Tomas Vanek --- src/target/adi_v5_swd.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/src/target/adi_v5_swd.c b/src/target/adi_v5_swd.c index f7a199c56..771b46090 100644 --- a/src/target/adi_v5_swd.c +++ b/src/target/adi_v5_swd.c @@ -112,9 +112,9 @@ static int swd_connect(struct adiv5_dap *dap) /* Note, debugport_init() does setup too */ jtag_interface->swd->switch_seq(JTAG_TO_SWD); - /* Make sure we don't try to perform any other accesses before the DPIDR read. */ + /* Clear link state, including the SELECT cache. */ dap->do_reconnect = false; - dap->select = 0; + dap->select = DP_SELECT_INVALID; swd_queue_dp_read(dap, DP_IDCODE, &idcode); @@ -123,8 +123,6 @@ static int swd_connect(struct adiv5_dap *dap) status = swd_run_inner(dap); - dap->select = DP_SELECT_INVALID; - if (status == ERROR_OK) { LOG_INFO("SWD IDCODE %#8.8" PRIx32, idcode); dap->do_reconnect = false; @@ -160,7 +158,8 @@ static int swd_queue_ap_abort(struct adiv5_dap *dap, uint8_t *ack) /** Select the DP register bank matching bits 7:4 of reg. */ static void swd_queue_dp_bankselect(struct adiv5_dap *dap, unsigned reg) { - if (reg == DP_SELECT) + /* Only register address 4 is banked. */ + if ((reg & 0xf) != 4) return; uint32_t select_dp_bank = (reg & 0x000000F0) >> 4; -- 2.11.4.GIT