From eb9bd3cc4cde2c261e3b7a886e0116cde2e43bc0 Mon Sep 17 00:00:00 2001
From: jakub <jakub@138bc75d-0d04-0410-961f-82ee72b054a4>
Date: Mon, 15 Sep 2014 18:23:36 +0000
Subject: [PATCH] gcc/ 	* Makefile.in (dg_target_exps): Remove. 
 (check_gcc_parallelize): Change to just an upper bound number. 
 (check-%-subtargets): Always print the non-parallelized goals. 
 (check_p_vars, check_p_comma, check_p_subwork): Remove. 
 (check_p_count, check_p_numbers0, check_p_numbers1, check_p_numbers2, 
 check_p_numbers3, check_p_numbers4, check_p_numbers5, 	check_p_numbers6): New
 variables. 	(check_p_numbers): Set to sequence from 1 to 9999. 
 (check_p_subdirs): Set to sequence from 1 to minimum of 
 $(check_p_count) and either GCC_TEST_PARALLEL_SLOTS env var if set, 	or
 128. 	(check-%, check-parallel-%): Rewritten so that for parallelized 
 testing each job runs all the *.exp files, with 
 GCC_RUNTEST_PARALLELIZE_DIR set in environment. gcc/go/ 	* Make-lang.in
 (check_go_parallelize): Change to just an upper bound 	number. gcc/fortran/ 
 * Make-lang.in (check_gfortran_parallelize): Change to just an upper 	bound
 number. gcc/cp/ 	* Make-lang.in (check_g++_parallelize): Change to just
 an upper bound 	number. gcc/objc/ 	* Make-lang.in
 (check_objc_parallelize): Change to just an upper 	bound number. gcc/ada/
 	* gcc-interface/Make-lang.in (check_acats_numbers0, 
 check_acats_numbers1, check_acats_numbers2, check_acats_numbers3, 
 check_acats_numbers4, check_acats_numbers5, check_acats_numbers6, 
 check_acats_numbers, check_acats_subdirs): New variables. 
 (check_acats_targets): Use $(check_acats_subdirs). 	(check-acats,
 check-acats%): Rewritten so that for parallelized 	testing each job runs
 all the chapters files, with 	GCC_RUNTEST_PARALLELIZE_DIR set in
 environment.  Prepare the support 	directory sequentially and share it. 
 (check-acats-subtargets): Always print just check-acats. gcc/testsuite/ 
 * lib/gcc-defs.exp (gcc_parallel_test_run_p, 	gcc_parallel_test_enable): New
 procedures.  If 	GCC_RUNTEST_PARALLELIZE_DIR is set in environment,
 override 	runtest_file_p to invoke also gcc_parallel_test_run_p. 	*
 g++.dg/guality/guality.exp (check_guality): Save/restore 	test_counts
 array around the body of the procedure. 	* gcc.dg/guality/guality.exp
 (check_guality): Likewise. 	* g++.dg/plugin/plugin.exp: Run all the tests
 serially 	by the first parallel runtest encountering it. 	*
 gcc.dg/plugin/plugin.exp: Likewise. 	* gcc.misc-tests/matrix1.exp:
 Likewise. 	* gcc.misc-tests/dhry.exp: Likewise. 	*
 gcc.misc-tests/acker1.exp: Likewise. 	* gcc.misc-tests/linkage.exp:
 Likewise. 	* gcc.misc-tests/mg.exp: Likewise. 	*
 gcc.misc-tests/mg-2.exp: Likewise. 	* gcc.misc-tests/sort2.exp: Likewise. 
 * gcc.misc-tests/sieve.exp: Likewise. 	* gcc.misc-tests/options.exp:
 Likewise. 	* gcc.misc-tests/help.exp: Likewise. 	* go.test/go-test.exp
 (go-gc-tests): Use 	gcc_parallel_test_enable {0, 1} around all handling of
 	each test. 	* objc.dg/gnu-encoding/gnu-encoding.exp: Likewise. 
 * ada/acats/run_all.sh: Parallelize using mkdir inside of 	a shared
 directory.  Avoid forking and expr uses if 	shell supports $(()).
 libstdc++-v3/ 	* testsuite/Makefile.am (check_p_numbers0, check_p_numbers1, 
 check_p_numbers2, check_p_numbers3, check_p_numbers4, 	check_p_numbers5,
 check_p_numbers6, check_p_numbers, 	check_p_subdirs): New variables. 
 (check_DEJAGNU_normal_targets): Use check_p_subdirs. 	(check-DEJAGNU):
 Rewritten so that for parallelized 	testing each job runs all the *.exp
 files, with 	GCC_RUNTEST_PARALLELIZE_DIR set in environment. 	*
 testsuite/Makefile.in: Regenerated. 	* testsuite/lib/libstdc++.exp
 (gcc_parallel_test_run_p, 	gcc_parallel_test_enable): New procedures.  If
 	GCC_RUNTEST_PARALLELIZE_DIR is set in environment, override 
 runtest_file_p to invoke also gcc_parallel_test_run_p. 	*
 testsuite/libstdc++-abi/abi.exp: Run all the tests serially 	by the first
 parallel runtest encountering it.  Fix up path 	of the extract_symvers
 script. 	* testsuite/libstdc++-xmethods/xmethods.exp: Run all the tests
 	serially by the first parallel runtest encountering it.  Run 
 dg-finish even in case of error.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@215273 138bc75d-0d04-0410-961f-82ee72b054a4
---
 gcc/ChangeLog                                      |  17 +++
 gcc/Makefile.in                                    | 145 ++++++++-------------
 gcc/ada/ChangeLog                                  |  13 ++
 gcc/ada/gcc-interface/Make-lang.in                 |  47 +++++--
 gcc/cp/ChangeLog                                   |   5 +
 gcc/cp/Make-lang.in                                |   6 +-
 gcc/fortran/ChangeLog                              |   5 +
 gcc/fortran/Make-lang.in                           |   7 +-
 gcc/go/ChangeLog                                   |   5 +
 gcc/go/Make-lang.in                                |   6 +-
 gcc/objc/ChangeLog                                 |   5 +
 gcc/objc/Make-lang.in                              |   2 +-
 gcc/testsuite/ChangeLog                            |  30 +++++
 gcc/testsuite/ada/acats/run_all.sh                 |  87 +++++++++++--
 gcc/testsuite/g++.dg/guality/guality.exp           |   6 +
 gcc/testsuite/g++.dg/plugin/plugin.exp             |  11 ++
 gcc/testsuite/gcc.dg/guality/guality.exp           |   6 +
 gcc/testsuite/gcc.dg/plugin/plugin.exp             |  11 ++
 gcc/testsuite/gcc.misc-tests/acker1.exp            |  12 ++
 gcc/testsuite/gcc.misc-tests/dhry.exp              |  12 ++
 gcc/testsuite/gcc.misc-tests/help.exp              |  12 ++
 gcc/testsuite/gcc.misc-tests/linkage.exp           |  13 ++
 gcc/testsuite/gcc.misc-tests/matrix1.exp           |  12 ++
 gcc/testsuite/gcc.misc-tests/mg-2.exp              |  12 ++
 gcc/testsuite/gcc.misc-tests/mg.exp                |  12 ++
 gcc/testsuite/gcc.misc-tests/options.exp           |  13 ++
 gcc/testsuite/gcc.misc-tests/sieve.exp             |  12 ++
 gcc/testsuite/gcc.misc-tests/sort2.exp             |  12 ++
 gcc/testsuite/go.test/go-test.exp                  |   7 +
 gcc/testsuite/lib/gcc-defs.exp                     |  75 +++++++++++
 .../objc.dg/gnu-encoding/gnu-encoding.exp          |   2 +
 libstdc++-v3/ChangeLog                             |  22 ++++
 libstdc++-v3/testsuite/Makefile.am                 |  80 +++++-------
 libstdc++-v3/testsuite/Makefile.in                 |  80 +++++-------
 libstdc++-v3/testsuite/lib/libstdc++.exp           |  75 +++++++++++
 libstdc++-v3/testsuite/libstdc++-abi/abi.exp       |  12 +-
 .../testsuite/libstdc++-xmethods/xmethods.exp      |   9 ++
 37 files changed, 673 insertions(+), 225 deletions(-)

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index ec7d9e88791..ef25462572a 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,20 @@
+2014-09-15  Jakub Jelinek  <jakub@redhat.com>
+
+	* Makefile.in (dg_target_exps): Remove.
+	(check_gcc_parallelize): Change to just an upper bound number.
+	(check-%-subtargets): Always print the non-parallelized goals.
+	(check_p_vars, check_p_comma, check_p_subwork): Remove.
+	(check_p_count, check_p_numbers0, check_p_numbers1, check_p_numbers2,
+	check_p_numbers3, check_p_numbers4, check_p_numbers5,
+	check_p_numbers6): New variables.
+	(check_p_numbers): Set to sequence from 1 to 9999.
+	(check_p_subdirs): Set to sequence from 1 to minimum of
+	$(check_p_count) and either GCC_TEST_PARALLEL_SLOTS env var if set,
+	or 128.
+	(check-%, check-parallel-%): Rewritten so that for parallelized
+	testing each job runs all the *.exp files, with
+	GCC_RUNTEST_PARALLELIZE_DIR set in environment.
+
 2014-09-15  David Malcolm  <dmalcolm@redhat.com>
 
 	* config/arc/arc-protos.h (arc_attr_type): Strengthen param from
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index e86382f7129..6f251a51738 100644
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -513,34 +513,10 @@ xm_include_list=@xm_include_list@
 xm_defines=@xm_defines@
 lang_checks=
 lang_checks_parallelized=
-dg_target_exps:=aarch64.exp,alpha.exp,arm.exp,avr.exp,bfin.exp,cris.exp
-dg_target_exps:=$(dg_target_exps),epiphany.exp,frv.exp,i386.exp,ia64.exp
-dg_target_exps:=$(dg_target_exps),m68k.exp,microblaze.exp,mips.exp,powerpc.exp
-dg_target_exps:=$(dg_target_exps),rx.exp,s390.exp,sh.exp,sparc.exp,spu.exp
-dg_target_exps:=$(dg_target_exps),tic6x.exp,xstormy16.exp
-# This lists a couple of test files that take most time during check-gcc.
-# When doing parallelized check-gcc, these can run in parallel with the
-# remaining tests.  Each word in this variable stands for work for one
-# make goal and one extra make goal is added to handle all the *.exp
-# files not handled explicitly already.  If multiple *.exp files
-# should be run in the same runtest invocation (usually if they aren't
-# very long running, but still should be split of from the check-parallel-$lang
-# remaining tests runtest invocation), they should be concatenated with commas.
-# Note that [a-zA-Z] wildcards need to have []s prefixed with \ (needed
-# by tcl) and as the *.exp arguments are mached both as is and with
-# */ prefixed to it in runtest_file_p, it is usually desirable to include
-# a subdirectory name.
-check_gcc_parallelize=execute.exp=execute/2* \
-		      execute.exp=execute/\[013-9a-fA-F\]* \
-		      execute.exp=execute/\[pP\]*,dg.exp \
-		      execute.exp=execute/\[g-oq-zG-OQ-Z\]*,compile.exp=compile/2* \
-		      compile.exp=compile/\[9pP\]*,builtins.exp \
-		      compile.exp=compile/\[013-8a-oq-zA-OQ-Z\]* \
-		      dg-torture.exp,ieee.exp \
-		      vect.exp,unsorted.exp \
-		      guality.exp \
-		      struct-layout-1.exp,stackalign.exp \
-		      $(dg_target_exps)
+# Upper limit to which it is useful to parallelize this lang target.
+# It doesn't make sense to try e.g. 128 goals for small testsuites
+# like objc or go.
+check_gcc_parallelize=10000
 lang_opt_files=@lang_opt_files@ $(srcdir)/c-family/c.opt $(srcdir)/common.opt
 lang_specs_files=@lang_specs_files@
 lang_tree_files=@lang_tree_files@
@@ -3631,27 +3607,34 @@ $(filter-out $(lang_checks_parallelized),$(lang_checks)): check-% : site.exp
 	    export TCL_LIBRARY ; fi ; \
 	$(RUNTEST) --tool $* $(RUNTESTFLAGS))
 
-$(patsubst %,%-subtargets,$(filter-out $(lang_checks_parallelized),$(lang_checks))): check-%-subtargets:
+$(patsubst %,%-subtargets,$(lang_checks)): check-%-subtargets:
 	@echo check-$*
 
 check_p_tool=$(firstword $(subst _, ,$*))
-check_p_vars=$(check_$(check_p_tool)_parallelize)
+check_p_count=$(check_$(check_p_tool)_parallelize)
 check_p_subno=$(word 2,$(subst _, ,$*))
-check_p_comma=,
-check_p_subwork=$(subst $(check_p_comma), ,$(if $(check_p_subno),$(word $(check_p_subno),$(check_p_vars))))
-check_p_numbers=1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
+check_p_numbers0:=1 2 3 4 5 6 7 8 9
+check_p_numbers1:=0 $(check_p_numbers0)
+check_p_numbers2:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1)))
+check_p_numbers3:=$(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2)
+check_p_numbers4:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3)))
+check_p_numbers5:=$(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4)
+check_p_numbers6:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5)))
+check_p_numbers:=$(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6)
 check_p_subdir=$(subst _,,$*)
-check_p_subdirs=$(wordlist 1,$(words $(check_$*_parallelize)),$(check_p_numbers))
+check_p_subdirs=$(wordlist 1,$(check_p_count),$(wordlist 1, \
+		$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128), \
+		$(check_p_numbers)))
 
 # For parallelized check-% targets, this decides whether parallelization
 # is desirable (if -jN is used and RUNTESTFLAGS doesn't contain anything
 # but optional --target_board or --extra_opts arguments).  If desirable,
 # recursive make is run with check-parallel-$lang{,1,2,3,4,5} etc. goals,
 # which can be executed in parallel, as they are run in separate directories.
-# check-parallel-$lang{1,2,3,4,5} etc. goals invoke runtest with the longest
-# running *.exp files from the testsuite, as determined by check_$lang_parallelize
-# variable.  The check-parallel-$lang goal in that case invokes runtest with
-# all the remaining *.exp files not handled by the separate goals.
+# check-parallel-$lang{,1,2,3,4,5} etc. goals invoke runtest with
+# GCC_RUNTEST_PARALLELIZE_DIR var in the environment and runtest_file_p
+# dejaGNU procedure is overridden to additionally synchronize through
+# a $lang-parallel directory which tests will be run by which runtest instance.
 # Afterwards contrib/dg-extract-results.sh is used to merge the sum and log
 # files.  If parallelization isn't desirable, only one recursive make
 # is run with check-parallel-$lang goal and check_$lang_parallelize variable
@@ -3662,76 +3645,60 @@ check_p_subdirs=$(wordlist 1,$(words $(check_$*_parallelize)),$(check_p_numbers)
 # to lang_checks_parallelized variable and define check_$lang_parallelize
 # variable (see above check_gcc_parallelize description).
 $(lang_checks_parallelized): check-% : site.exp
-	@if [ -z "$(filter-out --target_board=%,$(filter-out --extra_opts%,$(RUNTESTFLAGS)))" ] \
-	    && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+	-rm -rf $(TESTSUITEDIR)/$*-parallel
+	@if [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+	  test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR) || true; \
+	  test -d $(TESTSUITEDIR)/$*-parallel || mkdir $(TESTSUITEDIR)/$*-parallel || true; \
+	  GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/$(TESTSUITEDIR)/$(check_p_tool)-parallel ; \
+	  export GCC_RUNTEST_PARALLELIZE_DIR ; \
 	  $(MAKE) TESTSUITEDIR="$(TESTSUITEDIR)" RUNTESTFLAGS="$(RUNTESTFLAGS)" \
 	    check-parallel-$* \
 	    $(patsubst %,check-parallel-$*_%, $(check_p_subdirs)); \
-	  for file in $(TESTSUITEDIR)/$*/$* \
-		      $(patsubst %,$(TESTSUITEDIR)/$*%/$*,$(check_p_subdirs));\
+	  sums= ; logs= ; \
+	  for dir in $(TESTSUITEDIR)/$* \
+		     $(patsubst %,$(TESTSUITEDIR)/$*%,$(check_p_subdirs));\
 	  do \
-	    mv -f $$file.sum $$file.sum.sep; mv -f $$file.log $$file.log.sep; \
+	    if [ -d $$dir ]; then \
+	      mv -f $$dir/$*.sum $$dir/$*.sum.sep; mv -f $$dir/$*.log $$dir/$*.log.sep; \
+	      sums="$$sums $$dir/$*.sum.sep"; logs="$$logs $$dir/$*.log.sep"; \
+	    fi; \
 	  done; \
-	  $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh \
-	    $(TESTSUITEDIR)/$*/$*.sum.sep \
-	    $(patsubst %,$(TESTSUITEDIR)/$*%/$*.sum.sep,$(check_p_subdirs)) \
+	  $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh $$sums \
 	    > $(TESTSUITEDIR)/$*/$*.sum; \
-	  $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh -L \
-	    $(TESTSUITEDIR)/$*/$*.log.sep \
-	    $(patsubst %,$(TESTSUITEDIR)/$*%/$*.log.sep,$(check_p_subdirs)) \
+	  $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh -L $$logs \
 	    > $(TESTSUITEDIR)/$*/$*.log; \
+	  rm -rf $(TESTSUITEDIR)/$*-parallel || true; \
 	else \
 	  $(MAKE) TESTSUITEDIR="$(TESTSUITEDIR)" RUNTESTFLAGS="$(RUNTESTFLAGS)" \
 	    check_$*_parallelize= check-parallel-$*; \
 	fi
 
-# Just print the parallelized subtargets for those that want to split
-# the testing across machines.
-$(patsubst %,%-subtargets,$(lang_checks_parallelized)): check-%-subtargets:
-	@echo check-parallel-$* \
-	  $(patsubst %,check-parallel-$*_%, $(check_p_subdirs))
-
-# In the if [ -n "$(check_p_subno)" ] case runtest should be given the name of
-# the given *.exp file(s).  See comment above check_gcc_parallelize variable
-# for details on the content of these variables.
-#
-# In the elif [ -n "$(check_p_vars)" ] case runtest should be given
-# names of all the *.exp files for this tool that aren't already handled by
-# other goals.  First it finds all the *.exp files for this tool, then
-# prunes those already specified in check_$lang_parallelize or duplicates.
-#
-# Otherwise check-$lang isn't parallelized and runtest is invoked just with
-# the $(RUNTESTFLAGS) arguments.
 check-parallel-% : site.exp
 	-test -d plugin || mkdir plugin
 	-test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR)
 	test -d $(TESTSUITEDIR)/$(check_p_subdir) || mkdir $(TESTSUITEDIR)/$(check_p_subdir)
 	-(rootme=`${PWD_COMMAND}`; export rootme; \
 	srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \
-	cd $(TESTSUITEDIR)/$(check_p_subdir); \
-	rm -f tmp-site.exp; \
-	sed '/set tmpdir/ s|testsuite$$|$(TESTSUITEDIR)/$(check_p_subdir)|' \
+	if [ -n "$(check_p_subno)" ] \
+	   && [ -n "$$GCC_RUNTEST_PARALLELIZE_DIR" ] \
+	   && [ -f $(TESTSUITEDIR)/$(check_p_tool)-parallel/finished ]; then \
+	  rm -rf $(TESTSUITEDIR)/$(check_p_subdir); \
+	else \
+	  cd $(TESTSUITEDIR)/$(check_p_subdir); \
+	  rm -f tmp-site.exp; \
+	  sed '/set tmpdir/ s|testsuite$$|$(TESTSUITEDIR)/$(check_p_subdir)|' \
 		< ../../site.exp > tmp-site.exp; \
-	$(SHELL) $${srcdir}/../move-if-change tmp-site.exp site.exp; \
-	EXPECT=${EXPECT} ; export EXPECT ; \
-	if [ -f $${rootme}/../expect/expect ] ; then  \
-	   TCL_LIBRARY=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
-	    export TCL_LIBRARY ; fi ; \
-	runtestflags= ; \
-	if [ -n "$(check_p_subno)" ] ; then \
-	  runtestflags="$(check_p_subwork)"; \
-	elif [ -n "$(check_p_vars)" ] ; then \
-	  parts="`echo ' $(strip $(subst $(check_p_comma), ,$(check_p_vars))) ' \
-		  | sed 's/=[^ ]* / /g'`"; \
-	  for part in `find $$srcdir/testsuite/$(check_p_tool)* -name \*.exp` ; do \
-	    part=`basename $$part` ; \
-	    case " $$parts $$runtestflags " in \
-	      *" $$part "*) ;; \
-	      *) runtestflags="$$runtestflags $$part" ;; \
-	    esac ; \
-	  done ; \
-	fi ; \
-	$(RUNTEST) --tool $(check_p_tool) $(RUNTESTFLAGS) $$runtestflags)
+	  $(SHELL) $${srcdir}/../move-if-change tmp-site.exp site.exp; \
+	  EXPECT=${EXPECT} ; export EXPECT ; \
+	  if [ -f $${rootme}/../expect/expect ] ; then  \
+	    TCL_LIBRARY=`cd .. ; cd $${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \
+	    export TCL_LIBRARY ; \
+	  fi ; \
+	  $(RUNTEST) --tool $(check_p_tool) $(RUNTESTFLAGS); \
+	  if [ -n "$$GCC_RUNTEST_PARALLELIZE_DIR" ] ; then \
+	    touch $${rootme}/$(TESTSUITEDIR)/$(check_p_tool)-parallel/finished; \
+	  fi ; \
+	fi )
 
 # QMTest targets
 
diff --git a/gcc/ada/ChangeLog b/gcc/ada/ChangeLog
index 54e9c8ab49e..3bb099cdf51 100644
--- a/gcc/ada/ChangeLog
+++ b/gcc/ada/ChangeLog
@@ -1,3 +1,16 @@
+2014-09-15  Jakub Jelinek  <jakub@redhat.com>
+
+	* gcc-interface/Make-lang.in (check_acats_numbers0,
+	check_acats_numbers1, check_acats_numbers2, check_acats_numbers3,
+	check_acats_numbers4, check_acats_numbers5, check_acats_numbers6,
+	check_acats_numbers, check_acats_subdirs): New variables.
+	(check_acats_targets): Use $(check_acats_subdirs).
+	(check-acats, check-acats%): Rewritten so that for parallelized
+	testing each job runs all the chapters files, with
+	GCC_RUNTEST_PARALLELIZE_DIR set in environment.  Prepare the support
+	directory sequentially and share it.
+	(check-acats-subtargets): Always print just check-acats.
+
 2014-08-25  Martin Liska  <mliska@suse.cz>
 
 	* gcc-interface/utils.c (rest_of_subprog_body_compilation): Adjust to
diff --git a/gcc/ada/gcc-interface/Make-lang.in b/gcc/ada/gcc-interface/Make-lang.in
index 478272fac7b..e11794f9237 100644
--- a/gcc/ada/gcc-interface/Make-lang.in
+++ b/gcc/ada/gcc-interface/Make-lang.in
@@ -862,7 +862,18 @@ check-ada-subtargets: check-acats-subtargets check-gnat-subtargets
 
 ACATSDIR = $(TESTSUITEDIR)/ada/acats
 
-check_acats_targets = $(patsubst %,check-acats%, 0 1 2)
+check_acats_numbers0:=1 2 3 4 5 6 7 8 9
+check_acats_numbers1:=0 $(check_acats_numbers0)
+check_acats_numbers2:=$(foreach i,$(check_acats_numbers0),$(addprefix $(i),$(check_acats_numbers1)))
+check_acats_numbers3:=$(addprefix 0,$(check_acats_numbers1)) $(check_acats_numbers2)
+check_acats_numbers4:=$(foreach i,$(check_acats_numbers0),$(addprefix $(i),$(check_acats_numbers3)))
+check_acats_numbers5:=$(addprefix 0,$(check_acats_numbers3)) $(check_acats_numbers4)
+check_acats_numbers6:=$(foreach i,$(check_acats_numbers0),$(addprefix $(i),$(check_acats_numbers5)))
+check_acats_numbers:=$(check_acats_numbers0) $(check_acats_numbers2) $(check_acats_numbers4) $(check_acats_numbers6)
+check_acats_subdirs=$(wordlist 1, \
+		    $(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128), \
+		    $(check_acats_numbers))
+check_acats_targets = $(addprefix check-acats, $(check_acats_subdirs))
 
 check-acats:
 	@test -d $(ACATSDIR) || mkdir -p $(ACATSDIR); \
@@ -870,35 +881,45 @@ check-acats:
 	EXPECT=$(EXPECT); export EXPECT; \
 	if [ -z "$(CHAPTERS)" ] && [ "$(filter -j, $(MFLAGS))" = "-j" ]; \
 	then \
+	  rm -rf $(ACATSDIR)-parallel; \
+	  mkdir $(ACATSDIR)-parallel; \
+	  ( testdir=`cd ${srcdir}/${ACATSDIR} && ${PWD_COMMAND}`; \
+	    export testdir; \
+	    cd $(ACATSDIR) && $(SHELL) $${testdir}/run_acats NONE ) \
+	    || exit 1; \
+	  GCC_RUNTEST_PARALLELIZE_DIR=$$rootme/$(ACATSDIR)-parallel; \
+	  export GCC_RUNTEST_PARALLELIZE_DIR; \
 	  $(MAKE) $(check_acats_targets); \
-	  for idx in 0 1 2; do \
+	  rm -rf $(ACATSDIR)-parallel; \
+	  acats_sums= ; acats_logs= ; \
+	  for idx in "" $(check_acats_subdirs); do \
+	    [ -d $(ACATSDIR)$$idx ] || continue; \
 	    mv -f $(ACATSDIR)$$idx/acats.sum $(ACATSDIR)$$idx/acats.sum.sep; \
 	    mv -f $(ACATSDIR)$$idx/acats.log $(ACATSDIR)$$idx/acats.log.sep; \
+	    acats_sums="$$acats_sums $(ACATSDIR)$$idx/acats.sum.sep"; \
+	    acats_logs="$$acats_logs $(ACATSDIR)$$idx/acats.log.sep"; \
 	  done; \
 	  $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh \
-	    $(ACATSDIR)0/acats.sum.sep $(ACATSDIR)1/acats.sum.sep \
-	    $(ACATSDIR)2/acats.sum.sep > $(ACATSDIR)/acats.sum; \
+	    $$acats_sums > $(ACATSDIR)/acats.sum; \
 	  $(SHELL) $(srcdir)/../contrib/dg-extract-results.sh -L \
-	    $(ACATSDIR)0/acats.log.sep $(ACATSDIR)1/acats.log.sep \
-	    $(ACATSDIR)2/acats.log.sep > $(ACATSDIR)/acats.log; \
+	    $$acats_logs > $(ACATSDIR)/acats.log; \
 	  exit 0; \
 	fi; \
 	testdir=`cd ${srcdir}/${ACATSDIR} && ${PWD_COMMAND}`; \
 	export testdir; cd $(ACATSDIR) && $(SHELL) $${testdir}/run_acats $(CHAPTERS)
 
 check-acats-subtargets:
-	@echo $(check_acats_targets)
+	@echo check-acats
 
 # Parallelized check-acats
 $(check_acats_targets): check-acats%:
+	if [ -f $$GCC_RUNTEST_PARALLELIZE_DIR/finished ]; then \
+	  rm -rf $(ACATSDIR)$*; exit 0; \
+	fi; \
 	test -d $(ACATSDIR)$* || mkdir -p $(ACATSDIR)$*; \
 	testdir=`cd ${srcdir}/${ACATSDIR} && ${PWD_COMMAND}`; \
-	case "$*" in \
-	  0) chapters="`cd $$testdir/tests; echo [a-b]* c[0-4]*`";; \
-	  1) chapters="`cd $$testdir/tests; echo c[5-9ab]*`";; \
-	  2) chapters="`cd $$testdir/tests; echo c[c-z]* [d-z]*`";; \
-	esac; \
-	export testdir; cd $(ACATSDIR)$* && $(SHELL) $${testdir}/run_acats $$chapters
+	export testdir; cd $(ACATSDIR)$* && $(SHELL) $${testdir}/run_acats
+	touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished
 
 .PHONY: check-acats $(check_acats_targets)
 
diff --git a/gcc/cp/ChangeLog b/gcc/cp/ChangeLog
index ff72fd01a8f..fe312364ccc 100644
--- a/gcc/cp/ChangeLog
+++ b/gcc/cp/ChangeLog
@@ -1,3 +1,8 @@
+2014-09-15  Jakub Jelinek  <jakub@redhat.com>
+
+	* Make-lang.in (check_g++_parallelize): Change to just an upper bound
+	number.
+
 2014-09-13  Marek Polacek  <polacek@redhat.com>
 
 	PR c++/60862
diff --git a/gcc/cp/Make-lang.in b/gcc/cp/Make-lang.in
index bd1c1d78f88..36f9583d4b1 100644
--- a/gcc/cp/Make-lang.in
+++ b/gcc/cp/Make-lang.in
@@ -156,11 +156,7 @@ check-c++-subtargets : check-g++-subtargets
 lang_checks += check-g++
 lang_checks_parallelized += check-g++
 # For description see comment above check_gcc_parallelize in gcc/Makefile.in.
-check_g++_parallelize = old-deja.exp \
-	dg.exp=g++.dg/[0-9A-Za-bd-su-z]* \
-	dg.exp=g++.dg/[ct]* \
-	dg.exp=c-c++-common/*,dg-torture.exp
-
+check_g++_parallelize = 10000
 #
 # Install hooks:
 # cc1plus is installed elsewhere as part of $(COMPILERS).
diff --git a/gcc/fortran/ChangeLog b/gcc/fortran/ChangeLog
index 0defd7f6a98..fe5628b8272 100644
--- a/gcc/fortran/ChangeLog
+++ b/gcc/fortran/ChangeLog
@@ -1,3 +1,8 @@
+2014-09-15  Jakub Jelinek  <jakub@redhat.com>
+
+	* Make-lang.in (check_gfortran_parallelize): Change to just an upper
+	bound number.
+
 2014-09-13  Tobias Burnus  <burnus@net-b.de>
 
 	PR fortran/63252
diff --git a/gcc/fortran/Make-lang.in b/gcc/fortran/Make-lang.in
index f8287bd46b3..ca0a4e603af 100644
--- a/gcc/fortran/Make-lang.in
+++ b/gcc/fortran/Make-lang.in
@@ -168,12 +168,7 @@ check-fortran-subtargets : check-gfortran-subtargets
 lang_checks += check-gfortran
 lang_checks_parallelized += check-gfortran
 # For description see comment above check_gcc_parallelize in gcc/Makefile.in.
-check_gfortran_parallelize = dg.exp=gfortran.dg/\[adAD\]* \
-			     dg.exp=gfortran.dg/\[bcBC\]* \
-			     dg.exp=gfortran.dg/\[nopNOP\]* \
-			     dg.exp=gfortran.dg/\[isuvISUV\]* \
-			     dg.exp=gfortran.dg/\[efhkqrxzEFHKQRXZ\]* \
-			     dg.exp=gfortran.dg/\[0-9gjlmtwyGJLMTWY\]*
+check_gfortran_parallelize = 10000
 
 # GFORTRAN documentation.
 GFORTRAN_TEXI = \
diff --git a/gcc/go/ChangeLog b/gcc/go/ChangeLog
index 9a759ac0af8..06a83f1320f 100644
--- a/gcc/go/ChangeLog
+++ b/gcc/go/ChangeLog
@@ -1,3 +1,8 @@
+2014-09-15  Jakub Jelinek  <jakub@redhat.com>
+
+	* Make-lang.in (check_go_parallelize): Change to just an upper bound
+	number.
+
 2014-09-03  Chris Manghane  <cmang@google.com>
 
 	* go-gcc.cc (Gcc_backend::implicit_variable): Remove init
diff --git a/gcc/go/Make-lang.in b/gcc/go/Make-lang.in
index bbd26dc2110..c6891217056 100644
--- a/gcc/go/Make-lang.in
+++ b/gcc/go/Make-lang.in
@@ -131,11 +131,7 @@ go.srcman: doc/gccgo.1
 
 lang_checks += check-go
 lang_checks_parallelized += check-go
-check_go_parallelize = go-test.exp=*/test/\[0-57-9a-bd-hj-qs-zA-Z\]* \
-		       go-test.exp=*/test/c* \
-		       go-test.exp=*/test/i* \
-		       go-test.exp=*/test/r* \
-		       go-test.exp=*/test/6*
+check_go_parallelize = 10
 
 # Install hooks.
 
diff --git a/gcc/objc/ChangeLog b/gcc/objc/ChangeLog
index b9b1fdc5a9b..e0fd501ba82 100644
--- a/gcc/objc/ChangeLog
+++ b/gcc/objc/ChangeLog
@@ -1,3 +1,8 @@
+2014-09-15  Jakub Jelinek  <jakub@redhat.com>
+
+	* Make-lang.in (check_objc_parallelize): Change to just an upper
+	bound number.
+
 2014-07-14  Jan Hubicka  <hubicka@ucw.cz>
 
 	* objc-act.c (objc_common_tree_size): New function.
diff --git a/gcc/objc/Make-lang.in b/gcc/objc/Make-lang.in
index cd1fdb6281d..73570cd807d 100644
--- a/gcc/objc/Make-lang.in
+++ b/gcc/objc/Make-lang.in
@@ -96,7 +96,7 @@ lang_checks += check-objc
 # The following allows you to do 'make check-objc -j2'.  The
 # execute.exp tests will be run in parallel with all the other ones.
 lang_checks_parallelized += check-objc
-check_objc_parallelize = gnu-encoding.exp execute.exp exceptions.exp
+check_objc_parallelize = 6
 
 #
 # Install hooks:
diff --git a/gcc/testsuite/ChangeLog b/gcc/testsuite/ChangeLog
index 5f3c8db9bb0..d426cd19116 100644
--- a/gcc/testsuite/ChangeLog
+++ b/gcc/testsuite/ChangeLog
@@ -1,3 +1,33 @@
+2014-09-15  Jakub Jelinek  <jakub@redhat.com>
+
+	* lib/gcc-defs.exp (gcc_parallel_test_run_p,
+	gcc_parallel_test_enable): New procedures.  If
+	GCC_RUNTEST_PARALLELIZE_DIR is set in environment, override
+	runtest_file_p to invoke also gcc_parallel_test_run_p.
+	* g++.dg/guality/guality.exp (check_guality): Save/restore
+	test_counts array around the body of the procedure.
+	* gcc.dg/guality/guality.exp (check_guality): Likewise.
+	* g++.dg/plugin/plugin.exp: Run all the tests serially
+	by the first parallel runtest encountering it.
+	* gcc.dg/plugin/plugin.exp: Likewise.
+	* gcc.misc-tests/matrix1.exp: Likewise.
+	* gcc.misc-tests/dhry.exp: Likewise.
+	* gcc.misc-tests/acker1.exp: Likewise.
+	* gcc.misc-tests/linkage.exp: Likewise.
+	* gcc.misc-tests/mg.exp: Likewise.
+	* gcc.misc-tests/mg-2.exp: Likewise.
+	* gcc.misc-tests/sort2.exp: Likewise.
+	* gcc.misc-tests/sieve.exp: Likewise.
+	* gcc.misc-tests/options.exp: Likewise.
+	* gcc.misc-tests/help.exp: Likewise.
+	* go.test/go-test.exp (go-gc-tests): Use
+	gcc_parallel_test_enable {0, 1} around all handling of
+	each test.
+	* objc.dg/gnu-encoding/gnu-encoding.exp: Likewise.
+	* ada/acats/run_all.sh: Parallelize using mkdir inside of
+	a shared directory.  Avoid forking and expr uses if
+	shell supports $(()).
+
 2014-09-14  David Sherwood  <david.sherwood@arm.com>
 
 	* gcc.target/aarch64/vdup_lane_2.c (force_simd): Emit simd mov.
diff --git a/gcc/testsuite/ada/acats/run_all.sh b/gcc/testsuite/ada/acats/run_all.sh
index 5ec3e13083c..a084d6b3354 100755
--- a/gcc/testsuite/ada/acats/run_all.sh
+++ b/gcc/testsuite/ada/acats/run_all.sh
@@ -18,6 +18,21 @@ target_run () {
 
 # End of customization section.
 
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
 display_noeol () {
   printf "$@"
   printf "$@" >> $dir/acats.sum
@@ -90,6 +105,18 @@ display `type gnatmake`
 gnatls -v >> $dir/acats.log
 display ""
 
+if [ -n "$GCC_RUNTEST_PARALLELIZE_DIR" ]; then
+  dir_support=$dir/../acats/support
+
+  rm -rf $dir/run
+  mv $dir/tests $dir/tests.$$ 2> /dev/null
+  rm -rf $dir/tests.$$ &
+  mkdir -p $dir/run
+
+  cp -pr $dir/../acats/tests $dir/
+else
+  dir_support=$dir/support
+
 display "		=== acats support ==="
 display_noeol "Generating support files..."
 
@@ -186,6 +213,9 @@ target_gnatmake -c -gnato -gnatE *.adb >> $dir/acats.log 2>&1
 
 display " done."
 display ""
+
+fi
+
 display "		=== acats tests ==="
 
 if [ $# -eq 0 ]; then
@@ -197,8 +227,14 @@ fi
 glob_countn=0
 glob_countok=0
 glob_countu=0
+par_count=0
+par_countm=0
+par_last=
 
 for chapter in $chapters; do
+   # Used to generate support once and finish after that.
+   [ "$chapter" = "NONE" ] && continue
+
    display Running chapter $chapter ...
 
    if [ ! -d $dir/tests/$chapter ]; then
@@ -209,13 +245,43 @@ for chapter in $chapters; do
 
    cd $dir/tests/$chapter
    ls *.a *.ada *.adt *.am *.dep 2> /dev/null | sed -e 's/\(.*\)\..*/\1/g' | \
-   cut -c1-7 | sort | uniq | comm -23 - $dir/support/norun.lst \
+   cut -c1-7 | sort | uniq | comm -23 - $dir_support/norun.lst \
      > $dir/tests/$chapter/${chapter}.lst 
    countn=`wc -l < $dir/tests/$chapter/${chapter}.lst`
-   glob_countn=`expr $glob_countn + $countn`
-   counti=0
+   as_fn_arith $glob_countn + $countn
+   glob_countn=$as_val
    for i in `cat $dir/tests/$chapter/${chapter}.lst`; do 
-      counti=`expr $counti + 1`
+
+      # If running multiple run_all.sh jobs in parallel, decide
+      # if we should run this test in the current instance.
+      if [ -n "$GCC_RUNTEST_PARALLELIZE_DIR" ]; then
+	 case "$i" in
+	    # Ugh, some tests have inter-test dependencies, those
+	    # tests have to be scheduled on the same parallel instance
+	    # as previous test.
+	    ce2108f | ce2108h | ce3112d) ;;
+	    # All others can be hopefully scheduled freely.
+	    *)
+	       as_fn_arith $par_countm + 1
+	       par_countm=$as_val
+	       [ $par_countm -eq 10 ] && par_countm=0
+	       if [ $par_countm -eq 1 ]; then
+		  as_fn_arith $par_count + 1
+		  par_count=$as_val
+		  if mkdir $GCC_RUNTEST_PARALLELIZE_DIR/$par_count; then
+		     par_last=1
+		  else
+		     par_last=
+		  fi
+	       fi;;
+	 esac
+	 if [ -z "$par_last" ]; then
+	    as_fn_arith $glob_countn - 1
+	    glob_countn=$as_val
+	    continue
+	 fi
+      fi
+
       extraflags="-gnat95"
       grep $i $testdir/overflow.lst > /dev/null 2>&1
       if [ $? -eq 0 ]; then
@@ -254,7 +320,7 @@ for chapter in $chapters; do
       echo "BUILD $main" >> $dir/acats.log
       EXTERNAL_OBJECTS=""
       case $i in
-        cxb30*) EXTERNAL_OBJECTS="$dir/support/cxb30040.o $dir/support/cxb30060.o $dir/support/cxb30130.o $dir/support/cxb30131.o";;
+        cxb30*) EXTERNAL_OBJECTS="$dir_support/cxb30040.o $dir_support/cxb30060.o $dir_support/cxb30130.o $dir_support/cxb30131.o";;
         ca1020e) rm -f ca1020e_func1.adb ca1020e_func2.adb ca1020e_proc1.adb ca1020e_proc2.adb > /dev/null 2>&1;;
         ca14028) rm -f ca14028_func2.ads ca14028_func3.ads ca14028_proc1.ads ca14028_proc3.ads > /dev/null 2>&1;;
       esac
@@ -265,7 +331,7 @@ for chapter in $chapters; do
          continue
       fi
 
-      target_gnatmake $extraflags -I$dir/support $main >> $dir/acats.log 2>&1
+      target_gnatmake $extraflags -I$dir_support $main >> $dir/acats.log 2>&1
       if [ $? -ne 0 ]; then
          display "FAIL:	$i"
          failed="${failed}${i} "
@@ -290,12 +356,15 @@ for chapter in $chapters; do
             failed="${failed}${i} "
          else
             log "UNSUPPORTED:	$i"
-            glob_countn=`expr $glob_countn - 1`
-            glob_countu=`expr $glob_countu + 1`
+            as_fn_arith $glob_countn - 1
+            glob_countn=$as_val
+            as_fn_arith $glob_countu + 1
+            glob_countu=$as_val
          fi
       else
          log "PASS:	$i"
-         glob_countok=`expr $glob_countok + 1`
+         as_fn_arith $glob_countok + 1
+         glob_countok=$as_val
       fi
       clean_dir
    done
diff --git a/gcc/testsuite/g++.dg/guality/guality.exp b/gcc/testsuite/g++.dg/guality/guality.exp
index e0a8e93ae60..121522c3515 100644
--- a/gcc/testsuite/g++.dg/guality/guality.exp
+++ b/gcc/testsuite/g++.dg/guality/guality.exp
@@ -14,6 +14,11 @@ if { [istarget "powerpc-ibm-aix*"] } {
 }
 
 proc check_guality {args} {
+    # Don't count check_guality as PASS, or FAIL etc., that would make
+    # the total PASS count dependent on how many parallel runtest invocations
+    # ran guality.exp.  So save the counts first and restore them afterwards.
+    global test_counts
+    array set saved_test_counts [array get test_counts]
     set result [eval check_compile guality_check executable $args "-g -O0"]
     set lines [lindex $result 0]
     set output [lindex $result 1]
@@ -23,6 +28,7 @@ proc check_guality {args} {
       set ret [string match "*1 PASS, 0 FAIL, 0 UNRESOLVED*" $execout]
     }
     remote_file build delete $output
+    array get test_counts [array get saved_test_counts]
     return $ret
 }
 
diff --git a/gcc/testsuite/g++.dg/plugin/plugin.exp b/gcc/testsuite/g++.dg/plugin/plugin.exp
index e97fb76a270..f3fd8eeeb42 100644
--- a/gcc/testsuite/g++.dg/plugin/plugin.exp
+++ b/gcc/testsuite/g++.dg/plugin/plugin.exp
@@ -44,6 +44,15 @@ if $tracelevel then {
 # Load support procs.
 load_lib plugin-support.exp
 
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p plugin] {
+    return
+}
+gcc_parallel_test_enable 0
+
 # Specify the plugin source file and the associated test files in a list.
 # plugin_test_list={ {plugin1 test1 test2 ...} {plugin2 test1 ...} ... }
 set plugin_test_list [list \
@@ -68,3 +77,5 @@ foreach plugin_test $plugin_test_list {
     set plugin_input_tests [lreplace $plugin_test 0 0]
     plugin-test-execute $plugin_src $plugin_input_tests
 }
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.dg/guality/guality.exp b/gcc/testsuite/gcc.dg/guality/guality.exp
index 324f2990ec2..e21d5f5e1a4 100644
--- a/gcc/testsuite/gcc.dg/guality/guality.exp
+++ b/gcc/testsuite/gcc.dg/guality/guality.exp
@@ -14,6 +14,11 @@ if { [istarget "powerpc-ibm-aix*"] } {
 }
 
 proc check_guality {args} {
+    # Don't count check_guality as PASS, or FAIL etc., that would make
+    # the total PASS count dependent on how many parallel runtest invocations
+    # ran guality.exp.  So save the counts first and restore them afterwards.
+    global test_counts
+    array set saved_test_counts [array get test_counts]
     set result [eval check_compile guality_check executable $args "-g -O0"]
     set lines [lindex $result 0]
     set output [lindex $result 1]
@@ -23,6 +28,7 @@ proc check_guality {args} {
       set ret [string match "*1 PASS, 0 FAIL, 0 UNRESOLVED*" $execout]
     }
     remote_file build delete $output
+    array set test_counts [array get saved_test_counts]
     return $ret
 }
 
diff --git a/gcc/testsuite/gcc.dg/plugin/plugin.exp b/gcc/testsuite/gcc.dg/plugin/plugin.exp
index 03ca4d145b2..e4b5f5473ad 100644
--- a/gcc/testsuite/gcc.dg/plugin/plugin.exp
+++ b/gcc/testsuite/gcc.dg/plugin/plugin.exp
@@ -44,6 +44,15 @@ if $tracelevel then {
 # Load support procs.
 load_lib plugin-support.exp
 
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p plugin] {
+    return
+}
+gcc_parallel_test_enable 0
+
 # Specify the plugin source file and the associated test files in a list.
 # plugin_test_list={ {plugin1 test1 test2 ...} {plugin2 test1 ...} ... }
 set plugin_test_list [list \
@@ -80,3 +89,5 @@ dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/plugindir*.\[cSi\]]] \
 
 # All done.
 dg-finish
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/acker1.exp b/gcc/testsuite/gcc.misc-tests/acker1.exp
index ca035a8f80d..bb3135955fe 100644
--- a/gcc/testsuite/gcc.misc-tests/acker1.exp
+++ b/gcc/testsuite/gcc.misc-tests/acker1.exp
@@ -20,9 +20,21 @@ if { ![info exists PERF_TEST] || "$PERF_TEST" != "yes" } {
 }
 
 load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p acker1] {
+    return
+}
+gcc_parallel_test_enable 0
 
 prebase
 set actions run
 set compiler_output "^$"
 set program_output "^$"
 postbase acker1.c $run $groups
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/dhry.exp b/gcc/testsuite/gcc.misc-tests/dhry.exp
index f698d6ba85d..f9406c0e6ca 100644
--- a/gcc/testsuite/gcc.misc-tests/dhry.exp
+++ b/gcc/testsuite/gcc.misc-tests/dhry.exp
@@ -20,9 +20,21 @@ if { ![info exists PERF_TEST] || "$PERF_TEST" != "yes" } {
 }
 
 load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p dhry] {
+    return
+}
+gcc_parallel_test_enable 0
 
 prebase
 set actions run
 set compiler_output "^$"
 set program_output "^$"
 postbase dhry.c $run $groups
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/help.exp b/gcc/testsuite/gcc.misc-tests/help.exp
index e18912cfb52..ec996f91522 100644
--- a/gcc/testsuite/gcc.misc-tests/help.exp
+++ b/gcc/testsuite/gcc.misc-tests/help.exp
@@ -18,6 +18,16 @@
 # documented in --help, and that the various --help* options work.
 
 load_lib options.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p help] {
+    return
+}
+gcc_parallel_test_enable 0
 
 # Document --version.  Ideally, there should be no undocumented switches
 # in --help.
@@ -78,3 +88,5 @@ check_for_options c "--help=joined,^separate" "--help=" "" ""
 check_for_options c "--help=joined,undocumented" "" "" ""
 # Listing only excludes gives empty results.
 check_for_options c "--help=^joined,^separate" "" "" ""
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/linkage.exp b/gcc/testsuite/gcc.misc-tests/linkage.exp
index eeef6c25a1b..1e0a94b1866 100644
--- a/gcc/testsuite/gcc.misc-tests/linkage.exp
+++ b/gcc/testsuite/gcc.misc-tests/linkage.exp
@@ -18,6 +18,17 @@
 # was written by Rob Savoye. (rob@cygnus.com)
 # All the other tests driven by that file have since been moved elsewhere.
 
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p linkage] {
+    return
+}
+gcc_parallel_test_enable 0
+
 if { [isnative] && ![is_remote host] } then {
     set lines [gcc_target_compile "$srcdir/$subdir/linkage-x.c" "linkage-x.o" object {additional_flags="-w"}]
     if ![string match "" $lines] then {
@@ -117,3 +128,5 @@ if { [isnative] && ![is_remote host] } then {
 	file delete "linkage-x.o"
     }
 }
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/matrix1.exp b/gcc/testsuite/gcc.misc-tests/matrix1.exp
index fe06b1f9dc0..dd16a98a47d 100644
--- a/gcc/testsuite/gcc.misc-tests/matrix1.exp
+++ b/gcc/testsuite/gcc.misc-tests/matrix1.exp
@@ -20,9 +20,21 @@ if { ![info exists PERF_TEST] || "$PERF_TEST" != "yes" } {
 }
 
 load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p matrix1] {
+    return
+}
+gcc_parallel_test_enable 0
 
 prebase
 set actions run
 set compiler_output "^$"
 set program_output "^$"
 postbase matrix1.c $run $groups
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/mg-2.exp b/gcc/testsuite/gcc.misc-tests/mg-2.exp
index f2375c870b8..63ccce13365 100644
--- a/gcc/testsuite/gcc.misc-tests/mg-2.exp
+++ b/gcc/testsuite/gcc.misc-tests/mg-2.exp
@@ -17,8 +17,20 @@
 # Test the -MG flag with a system header file.
 
 load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p mg-2] {
+    return
+}
+gcc_parallel_test_enable 0
 
 prebase
 set actions none-of-the-above
 set compiler_output "mg-2.o ?: .*mg-2.c \[ \\\\\n\]*nonexist.h"
 postbase mg-2.c "" "" "-MM -MG"
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/mg.exp b/gcc/testsuite/gcc.misc-tests/mg.exp
index ad28ee78ef3..f905bc0e8e0 100644
--- a/gcc/testsuite/gcc.misc-tests/mg.exp
+++ b/gcc/testsuite/gcc.misc-tests/mg.exp
@@ -17,8 +17,20 @@
 # Test the -MG flag.
 
 load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p mg] {
+    return
+}
+gcc_parallel_test_enable 0
 
 prebase
 set actions none-of-the-above
 set compiler_output "mg.o ?: .*mg.c \[ \\\\\n\]*nonexist.h"
 postbase mg.c "" "" "-MM -MG"
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/options.exp b/gcc/testsuite/gcc.misc-tests/options.exp
index bb619dc2b35..49be839ef98 100644
--- a/gcc/testsuite/gcc.misc-tests/options.exp
+++ b/gcc/testsuite/gcc.misc-tests/options.exp
@@ -19,6 +19,17 @@
 # match the patterns COMPILER_PATTERN, AS_PATTERN and LD_PATTERN,
 # respectively.
 
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p options] {
+    return
+}
+gcc_parallel_test_enable 0
+
 proc check_for_all_options {language gcc_options compiler_pattern as_pattern ld_pattern} {
     set filename test-[pid]
     set fd [open $filename.c w]
@@ -52,3 +63,5 @@ proc check_for_all_options {language gcc_options compiler_pattern as_pattern ld_
 }
 
 check_for_all_options c {--coverage} {-fprofile-arcs -ftest-coverage} {} {-lgcov}
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/sieve.exp b/gcc/testsuite/gcc.misc-tests/sieve.exp
index 7007b644c07..c7a6593d2b9 100644
--- a/gcc/testsuite/gcc.misc-tests/sieve.exp
+++ b/gcc/testsuite/gcc.misc-tests/sieve.exp
@@ -20,9 +20,21 @@ if { ![info exists PERF_TEST] || "$PERF_TEST" != "yes" } {
 }
 
 load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p sieve] {
+    return
+}
+gcc_parallel_test_enable 0
 
 prebase
 set actions run
 set compiler_output "^$"
 set program_output "^$"
 postbase sieve.c $run $groups
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/gcc.misc-tests/sort2.exp b/gcc/testsuite/gcc.misc-tests/sort2.exp
index 28bdf1f84d0..63a5aea1f86 100644
--- a/gcc/testsuite/gcc.misc-tests/sort2.exp
+++ b/gcc/testsuite/gcc.misc-tests/sort2.exp
@@ -20,9 +20,21 @@ if { ![info exists PERF_TEST] || "$PERF_TEST" != "yes" } {
 }
 
 load_lib mike-gcc.exp
+load_lib gcc-defs.exp
+
+# These tests don't run runtest_file_p consistently if it
+# doesn't return the same values, so disable parallelization
+# of this *.exp file.  The first parallel runtest to reach
+# this will run all the tests serially.
+if ![gcc_parallel_test_run_p sort2] {
+    return
+}
+gcc_parallel_test_enable 0
 
 prebase
 set actions run
 set compiler_output "^$"
 set program_output "^$"
 postbase sort2.c $run $groups
+
+gcc_parallel_test_enable 1
diff --git a/gcc/testsuite/go.test/go-test.exp b/gcc/testsuite/go.test/go-test.exp
index eed0d68e4c7..fd837227d07 100644
--- a/gcc/testsuite/go.test/go-test.exp
+++ b/gcc/testsuite/go.test/go-test.exp
@@ -489,6 +489,12 @@ proc go-gc-tests { } {
 
 	close $fd
 
+	# runtest_file_p is already run above, and the code below can run
+	# runtest_file_p again, make sure everything for this test is
+	# performed if the above runtest_file_p decided this runtest
+	# instance should execute the test
+	gcc_parallel_test_enable 0
+
 	set go_compile_args ""
 	set go_execute_args ""
 	if { [regexp "// run (\[^|&>2\].*)\$" $test_line match progargs] \
@@ -1164,6 +1170,7 @@ proc go-gc-tests { } {
 	set go_compile_args ""
 	set go_execute_args ""
         set TORTURE_OPTIONS [list { -O2 -g }]
+	gcc_parallel_test_enable 1
     }
 
     set dg-do-what-default ${saved-dg-do-what-default}
diff --git a/gcc/testsuite/lib/gcc-defs.exp b/gcc/testsuite/lib/gcc-defs.exp
index 1ea7028b636..cb932382fa7 100644
--- a/gcc/testsuite/lib/gcc-defs.exp
+++ b/gcc/testsuite/lib/gcc-defs.exp
@@ -188,6 +188,81 @@ if { [info procs runtest_file_p] == "" } then {
     }
 }
 
+if { [info exists env(GCC_RUNTEST_PARALLELIZE_DIR)] \
+     && [info procs runtest_file_p] != [list] \
+     && [info procs gcc_parallelize_saved_runtest_file_p] == [list] } then {
+    global gcc_runtest_parallelize_counter
+    global gcc_runtest_parallelize_counter_minor
+    global gcc_runtest_parallelize_enable
+    global gcc_runtest_parallelize_dir
+    global gcc_runtest_parallelize_last
+
+    set gcc_runtest_parallelize_counter 0
+    set gcc_runtest_parallelize_counter_minor 0
+    set gcc_runtest_parallelize_enable 1
+    set gcc_runtest_parallelize_dir [getenv GCC_RUNTEST_PARALLELIZE_DIR]
+    set gcc_runtest_parallelize_last 0
+
+    proc gcc_parallel_test_run_p { testcase } {
+	global gcc_runtest_parallelize_counter
+	global gcc_runtest_parallelize_counter_minor
+	global gcc_runtest_parallelize_enable
+	global gcc_runtest_parallelize_dir
+	global gcc_runtest_parallelize_last
+
+	if { $gcc_runtest_parallelize_enable == 0 } {
+	    return 1
+	}
+
+	# Only test the filesystem every 10th iteration
+	incr gcc_runtest_parallelize_counter_minor
+	if { $gcc_runtest_parallelize_counter_minor == 10 } {
+	    set gcc_runtest_parallelize_counter_minor 0
+	}
+	if { $gcc_runtest_parallelize_counter_minor != 1 } {
+	    #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter $gcc_runtest_parallelize_last"
+	    return $gcc_runtest_parallelize_last
+	}
+
+	set path $gcc_runtest_parallelize_dir/$gcc_runtest_parallelize_counter
+
+	if {![catch {open $path {RDWR CREAT EXCL} 0600} fd]} {
+	    close $fd
+	    set gcc_runtest_parallelize_last 1
+	    #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter 1"
+	    incr gcc_runtest_parallelize_counter
+	    return 1
+	}
+	set gcc_runtest_parallelize_last 0
+	#verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter 0"
+	incr gcc_runtest_parallelize_counter
+	return 0
+    }
+
+    proc gcc_parallel_test_enable { val } {
+	global gcc_runtest_parallelize_enable
+	set gcc_runtest_parallelize_enable $val
+    }
+
+    rename runtest_file_p gcc_parallelize_saved_runtest_file_p
+    proc runtest_file_p { runtests testcase } {
+	if ![gcc_parallelize_saved_runtest_file_p $runtests $testcase] {
+	    return 0
+	}
+	return [gcc_parallel_test_run_p $testcase]
+    }
+
+} else {
+
+    proc gcc_parallel_test_run_p { testcase } {
+	return 1
+    }
+
+    proc gcc_parallel_test_enable { val } {
+    }
+
+}
+
 # Like dg-options, but adds to the default options rather than replacing them.
 
 proc dg-additional-options { args } {
diff --git a/gcc/testsuite/objc.dg/gnu-encoding/gnu-encoding.exp b/gcc/testsuite/objc.dg/gnu-encoding/gnu-encoding.exp
index d833f92546c..822bff4def7 100644
--- a/gcc/testsuite/objc.dg/gnu-encoding/gnu-encoding.exp
+++ b/gcc/testsuite/objc.dg/gnu-encoding/gnu-encoding.exp
@@ -58,7 +58,9 @@ if { $status == 0 } then {
                 continue
             }
 
+	    gcc_parallel_test_enable 0
             dg-runtest $src "" $DEFAULT_CFLAGS
+	    gcc_parallel_test_enable 1
         }
     } else {
         warning "Could not execute objc.dg/gnu-encoding/struct-layout-encoding-1 generator"
diff --git a/libstdc++-v3/ChangeLog b/libstdc++-v3/ChangeLog
index 4ac9347e9be..2dc5a24d101 100644
--- a/libstdc++-v3/ChangeLog
+++ b/libstdc++-v3/ChangeLog
@@ -1,3 +1,25 @@
+2014-09-15  Jakub Jelinek  <jakub@redhat.com>
+
+	* testsuite/Makefile.am (check_p_numbers0, check_p_numbers1,
+	check_p_numbers2, check_p_numbers3, check_p_numbers4,
+	check_p_numbers5, check_p_numbers6, check_p_numbers,
+	check_p_subdirs): New variables.
+	(check_DEJAGNU_normal_targets): Use check_p_subdirs.
+	(check-DEJAGNU): Rewritten so that for parallelized
+	testing each job runs all the *.exp files, with
+	GCC_RUNTEST_PARALLELIZE_DIR set in environment.
+	* testsuite/Makefile.in: Regenerated.
+	* testsuite/lib/libstdc++.exp (gcc_parallel_test_run_p,
+	gcc_parallel_test_enable): New procedures.  If
+	GCC_RUNTEST_PARALLELIZE_DIR is set in environment, override
+	runtest_file_p to invoke also gcc_parallel_test_run_p.
+	* testsuite/libstdc++-abi/abi.exp: Run all the tests serially
+	by the first parallel runtest encountering it.  Fix up path
+	of the extract_symvers script.
+	* testsuite/libstdc++-xmethods/xmethods.exp: Run all the tests
+	serially by the first parallel runtest encountering it.  Run
+	dg-finish even in case of error.
+
 2014-09-15  Jonathan Wakely  <jwakely@redhat.com>
 
 	* include/bits/regex.h (basic_regex): Rename _Ch_typeraits template
diff --git a/libstdc++-v3/testsuite/Makefile.am b/libstdc++-v3/testsuite/Makefile.am
index f3dd3d61f69..e206aba4ce6 100644
--- a/libstdc++-v3/testsuite/Makefile.am
+++ b/libstdc++-v3/testsuite/Makefile.am
@@ -101,26 +101,37 @@ new-abi-baseline:
 	@test ! -f $*/site.exp || mv $*/site.exp $*/site.bak
 	@mv $*/site.exp.tmp $*/site.exp
 
-check_DEJAGNU_normal_targets = $(patsubst %,check-DEJAGNUnormal%,0 1 2 3 4 5 6 7 8 9 10)
+check_p_numbers0:=1 2 3 4 5 6 7 8 9
+check_p_numbers1:=0 $(check_p_numbers0)
+check_p_numbers2:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1)))
+check_p_numbers3:=$(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2)
+check_p_numbers4:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3)))
+check_p_numbers5:=$(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4)
+check_p_numbers6:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5)))
+check_p_numbers:=$(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6)
+check_p_subdirs=$(wordlist 1,$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128),$(check_p_numbers))
+check_DEJAGNU_normal_targets = $(addprefix check-DEJAGNUnormal,$(check_p_subdirs))
 $(check_DEJAGNU_normal_targets): check-DEJAGNUnormal%: normal%/site.exp
 
 # Run the testsuite in normal mode.
 check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp
 	AR="$(AR)"; export AR; \
 	RANLIB="$(RANLIB)"; export RANLIB; \
-	if [ -z "$*$(filter-out --target_board=%, $(RUNTESTFLAGS))" ] \
-	    && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+	if [ -z "$*" ] && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+	  rm -rf normal-parallel || true; \
+	  mkdir normal-parallel; \
 	  $(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \
-	  for idx in 0 1 2 3 4 5 6 7 8 9 10; do \
-	    mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
-	    mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
+	  rm -rf normal-parallel || true; \
+	  for idx in $(check_p_subdirs); do \
+	    if [ -d normal$$idx ]; then \
+	      mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
+	      mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
+	    fi; \
 	  done; \
-	  mv -f libstdc++.sum libstdc++.sum.sep; \
-	  mv -f libstdc++.log libstdc++.log.sep; \
 	  $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \
-	    libstdc++.sum.sep normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
+	    normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
 	  $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \
-	    libstdc++.log.sep normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
+	    normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
 	  exit 0; \
 	fi; \
 	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
@@ -128,47 +139,20 @@ check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp
 	runtest=$(RUNTEST); \
 	if [ -z "$$runtest" ]; then runtest=runtest; fi; \
 	tool=libstdc++; \
-	dirs=; \
-	case "$*" in \
-	  normal0) \
-	    if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
-	      $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
-			$(RUNTESTFLAGS) abi.exp prettyprinters.exp; \
-	    else echo "WARNING: could not find \`runtest'" 1>&2; :;\
-	    fi; \
-	    dirs="`cd $$srcdir; echo [013-9][0-9]_*/*`";; \
-	  normal1) \
-	    dirs="`cd $$srcdir; echo [ab]* de* [ep]*/*`";; \
-	  normal2) \
-	    dirs="`cd $$srcdir; echo 2[01]_*/*`";; \
-	  normal3) \
-	    dirs="`cd $$srcdir; echo 22_*/*`";; \
-	  normal4) \
-	    dirs="`cd $$srcdir; echo 23_*/[a-km-tw-z]*`";; \
-	  normal5) \
-	    dirs="`cd $$srcdir; echo 23_*/[luv]*`";; \
-	  normal6) \
-	    dirs="`cd $$srcdir; echo 2[459]_*/*`";; \
-	  normal7) \
-	    dirs="`cd $$srcdir; echo 26_*/* 28_*/[c-z]*`";; \
-	  normal8) \
-	    dirs="`cd $$srcdir; echo 27_*/*`";; \
-	  normal9) \
-	    dirs="`cd $$srcdir; echo 28_*/[ab]*`";; \
-	  normal10) \
-	    dirs="`cd $$srcdir; echo t*/*`";; \
-	esac; \
-	if [ -n "$*" ]; then cd "$*"; fi; \
+	if [ -n "$*" ]; then \
+	  if [ -f normal-parallel/finished ]; then rm -rf "$*"; exit 0; fi; \
+	  GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/normal-parallel; \
+	  export GCC_RUNTEST_PARALLELIZE_DIR; \
+	  cd "$*"; \
+	fi; \
 	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
-	  if [ -n "$$dirs" ]; then \
-	    $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
-		    $(RUNTESTFLAGS) \
-		    "conformance.exp=`echo $$dirs | sed 's/ /* /g;s/$$/*/'`"; \
-	  else \
-	    $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
+	  $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
 		    $(RUNTESTFLAGS); \
+	  if [ -n "$*" ]; then \
+	    touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished; \
 	  fi; \
-	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+	else \
+	  echo "WARNING: could not find \`runtest'" 1>&2; :;\
 	fi
 
 check-am:
diff --git a/libstdc++-v3/testsuite/Makefile.in b/libstdc++-v3/testsuite/Makefile.in
index 7a923f36d95..59060b8db01 100644
--- a/libstdc++-v3/testsuite/Makefile.in
+++ b/libstdc++-v3/testsuite/Makefile.in
@@ -301,7 +301,16 @@ lists_of_files = \
 
 extract_symvers = $(glibcxx_builddir)/scripts/extract_symvers
 baseline_subdir := $(shell $(CXX) $(baseline_subdir_switch))
-check_DEJAGNU_normal_targets = $(patsubst %,check-DEJAGNUnormal%,0 1 2 3 4 5 6 7 8 9 10)
+check_p_numbers0:=1 2 3 4 5 6 7 8 9
+check_p_numbers1:=0 $(check_p_numbers0)
+check_p_numbers2:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1)))
+check_p_numbers3:=$(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2)
+check_p_numbers4:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3)))
+check_p_numbers5:=$(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4)
+check_p_numbers6:=$(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5)))
+check_p_numbers:=$(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6)
+check_p_subdirs=$(wordlist 1,$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128),$(check_p_numbers))
+check_DEJAGNU_normal_targets = $(addprefix check-DEJAGNUnormal,$(check_p_subdirs))
 
 # Runs the testsuite, but in compile only mode.
 # Can be used to test sources with non-GNU FE's at various warning
@@ -559,19 +568,21 @@ $(check_DEJAGNU_normal_targets): check-DEJAGNUnormal%: normal%/site.exp
 check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp
 	AR="$(AR)"; export AR; \
 	RANLIB="$(RANLIB)"; export RANLIB; \
-	if [ -z "$*$(filter-out --target_board=%, $(RUNTESTFLAGS))" ] \
-	    && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+	if [ -z "$*" ] && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
+	  rm -rf normal-parallel || true; \
+	  mkdir normal-parallel; \
 	  $(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \
-	  for idx in 0 1 2 3 4 5 6 7 8 9 10; do \
-	    mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
-	    mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
+	  rm -rf normal-parallel || true; \
+	  for idx in $(check_p_subdirs); do \
+	    if [ -d normal$$idx ]; then \
+	      mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
+	      mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
+	    fi; \
 	  done; \
-	  mv -f libstdc++.sum libstdc++.sum.sep; \
-	  mv -f libstdc++.log libstdc++.log.sep; \
 	  $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \
-	    libstdc++.sum.sep normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
+	    normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
 	  $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \
-	    libstdc++.log.sep normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
+	    normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
 	  exit 0; \
 	fi; \
 	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
@@ -579,47 +590,20 @@ check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp
 	runtest=$(RUNTEST); \
 	if [ -z "$$runtest" ]; then runtest=runtest; fi; \
 	tool=libstdc++; \
-	dirs=; \
-	case "$*" in \
-	  normal0) \
-	    if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
-	      $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
-			$(RUNTESTFLAGS) abi.exp prettyprinters.exp; \
-	    else echo "WARNING: could not find \`runtest'" 1>&2; :;\
-	    fi; \
-	    dirs="`cd $$srcdir; echo [013-9][0-9]_*/*`";; \
-	  normal1) \
-	    dirs="`cd $$srcdir; echo [ab]* de* [ep]*/*`";; \
-	  normal2) \
-	    dirs="`cd $$srcdir; echo 2[01]_*/*`";; \
-	  normal3) \
-	    dirs="`cd $$srcdir; echo 22_*/*`";; \
-	  normal4) \
-	    dirs="`cd $$srcdir; echo 23_*/[a-km-tw-z]*`";; \
-	  normal5) \
-	    dirs="`cd $$srcdir; echo 23_*/[luv]*`";; \
-	  normal6) \
-	    dirs="`cd $$srcdir; echo 2[459]_*/*`";; \
-	  normal7) \
-	    dirs="`cd $$srcdir; echo 26_*/* 28_*/[c-z]*`";; \
-	  normal8) \
-	    dirs="`cd $$srcdir; echo 27_*/*`";; \
-	  normal9) \
-	    dirs="`cd $$srcdir; echo 28_*/[ab]*`";; \
-	  normal10) \
-	    dirs="`cd $$srcdir; echo t*/*`";; \
-	esac; \
-	if [ -n "$*" ]; then cd "$*"; fi; \
+	if [ -n "$*" ]; then \
+	  if [ -f normal-parallel/finished ]; then rm -rf "$*"; exit 0; fi; \
+	  GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/normal-parallel; \
+	  export GCC_RUNTEST_PARALLELIZE_DIR; \
+	  cd "$*"; \
+	fi; \
 	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
-	  if [ -n "$$dirs" ]; then \
-	    $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
-		    $(RUNTESTFLAGS) \
-		    "conformance.exp=`echo $$dirs | sed 's/ /* /g;s/$$/*/'`"; \
-	  else \
-	    $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
+	  $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
 		    $(RUNTESTFLAGS); \
+	  if [ -n "$*" ]; then \
+	    touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished; \
 	  fi; \
-	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+	else \
+	  echo "WARNING: could not find \`runtest'" 1>&2; :;\
 	fi
 
 check-am:
diff --git a/libstdc++-v3/testsuite/lib/libstdc++.exp b/libstdc++-v3/testsuite/lib/libstdc++.exp
index 0fdfbdc4b72..6e228054549 100644
--- a/libstdc++-v3/testsuite/lib/libstdc++.exp
+++ b/libstdc++-v3/testsuite/lib/libstdc++.exp
@@ -1823,3 +1823,78 @@ proc check_v3_target_little_endian { } {
 }
 
 set additional_prunes ""
+
+if { [info exists env(GCC_RUNTEST_PARALLELIZE_DIR)] \
+     && [info procs runtest_file_p] != [list] \
+     && [info procs gcc_parallelize_saved_runtest_file_p] == [list] } then {
+    global gcc_runtest_parallelize_counter
+    global gcc_runtest_parallelize_counter_minor
+    global gcc_runtest_parallelize_enable
+    global gcc_runtest_parallelize_dir
+    global gcc_runtest_parallelize_last
+
+    set gcc_runtest_parallelize_counter 0
+    set gcc_runtest_parallelize_counter_minor 0
+    set gcc_runtest_parallelize_enable 1
+    set gcc_runtest_parallelize_dir [getenv GCC_RUNTEST_PARALLELIZE_DIR]
+    set gcc_runtest_parallelize_last 0
+
+    proc gcc_parallel_test_run_p { testcase } {
+	global gcc_runtest_parallelize_counter
+	global gcc_runtest_parallelize_counter_minor
+	global gcc_runtest_parallelize_enable
+	global gcc_runtest_parallelize_dir
+	global gcc_runtest_parallelize_last
+
+	if { $gcc_runtest_parallelize_enable == 0 } {
+	    return 1
+	}
+
+	# Only test the filesystem every 10th iteration
+	incr gcc_runtest_parallelize_counter_minor
+	if { $gcc_runtest_parallelize_counter_minor == 10 } {
+	    set gcc_runtest_parallelize_counter_minor 0
+	}
+	if { $gcc_runtest_parallelize_counter_minor != 1 } {
+	    #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter $gcc_runtest_parallelize_last"
+	    return $gcc_runtest_parallelize_last
+	}
+
+	set path $gcc_runtest_parallelize_dir/$gcc_runtest_parallelize_counter
+
+	if {![catch {open $path {RDWR CREAT EXCL} 0600} fd]} {
+	    close $fd
+	    set gcc_runtest_parallelize_last 1
+	    #verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter 1"
+	    incr gcc_runtest_parallelize_counter
+	    return 1
+	}
+	set gcc_runtest_parallelize_last 0
+	#verbose -log "gcc_parallel_test_run_p $testcase $gcc_runtest_parallelize_counter 0"
+	incr gcc_runtest_parallelize_counter
+	return 0
+    }
+
+    proc gcc_parallel_test_enable { val } {
+	global gcc_runtest_parallelize_enable
+	set gcc_runtest_parallelize_enable $val
+    }
+
+    rename runtest_file_p gcc_parallelize_saved_runtest_file_p
+    proc runtest_file_p { runtests testcase } {
+	if ![gcc_parallelize_saved_runtest_file_p $runtests $testcase] {
+	    return 0
+	}
+	return [gcc_parallel_test_run_p $testcase]
+    }
+
+} else {
+
+    proc gcc_parallel_test_run_p { testcase } {
+	return 1
+    }
+
+    proc gcc_parallel_test_enable { val } {
+    }
+
+}
diff --git a/libstdc++-v3/testsuite/libstdc++-abi/abi.exp b/libstdc++-v3/testsuite/libstdc++-abi/abi.exp
index 0d657fbdecb..ed1886567a6 100644
--- a/libstdc++-v3/testsuite/libstdc++-abi/abi.exp
+++ b/libstdc++-v3/testsuite/libstdc++-abi/abi.exp
@@ -18,6 +18,12 @@
 # this test. Or, hey, if we don't support this kind of symbol
 # versioning test: don't run it.
 
+# Only run whole abi.exp in one instance, serially.
+if ![gcc_parallel_test_run_p abi] {
+    return
+}
+gcc_parallel_test_enable 0
+
 if { [string match "*-*-darwin*" $target_triplet] } {
     set lib $blddir/src/.libs/libstdc++.dylib
 } else { 
@@ -30,6 +36,7 @@ v3-build_support
 if { (${v3-symver} == 0) || ![info exists baseline_dir] \
 	 || ![file exists $baseline_dir] \
 	 || ![file exists $lib] } {
+    gcc_parallel_test_enable 1
     return
 }
 
@@ -42,12 +49,13 @@ if ![file exists $baseline_file] {
     set baseline_file [file join $baseline_dir "baseline_symbols.txt"]
 }
 if ![file exists $baseline_file] {
+    gcc_parallel_test_enable 1
     return
 }
 send_log "Checking $lib against $baseline_file\n"
 
 # Figure out what symbols are defined by the active build of the library.
-remote_exec "build" "$objdir/../scripts/extract_symvers" \
+remote_exec "build" "$blddir/scripts/extract_symvers" \
     [list $lib "current_symbols.txt"]
 
 # Build the abi_check program.
@@ -62,3 +70,5 @@ set result [${tool}_load "./abi_check" \
 		[list "--check-verbose" "current_symbols.txt" \
 		     "baseline_symbols.txt"]]
 [lindex $result 0] "libstdc++-abi/abi_check"
+
+gcc_parallel_test_enable 1
diff --git a/libstdc++-v3/testsuite/libstdc++-xmethods/xmethods.exp b/libstdc++-v3/testsuite/libstdc++-xmethods/xmethods.exp
index c51c7e8ed13..295e69493e1 100644
--- a/libstdc++-v3/testsuite/libstdc++-xmethods/xmethods.exp
+++ b/libstdc++-v3/testsuite/libstdc++-xmethods/xmethods.exp
@@ -16,6 +16,12 @@
 
 load_lib gdb-test.exp
 
+# Only run whole xmethods.exp in one instance, serially.
+if ![gcc_parallel_test_run_p xmethods] {
+    return
+}
+gcc_parallel_test_enable 0
+
 dg-init
 v3-build_support
 
@@ -30,7 +36,9 @@ if ![info exists ::env(GUALITY_GDB_NAME)] {
 }
 
 if {! [gdb_version_check_xmethods]} {
+    dg-finish
     unsupported "xmethods.exp"
+    gcc_parallel_test_enable 1
     return
 }
 
@@ -49,3 +57,4 @@ if [info exists guality_gdb_name] {
 }
 
 dg-finish
+gcc_parallel_test_enable 1
-- 
2.11.4.GIT