1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995
3 # 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
5 #This file is part of GNU CC.
7 #GNU CC is free software; you can redistribute it and/or modify
8 #it under the terms of the GNU General Public License as published by
9 #the Free Software Foundation; either version 2, or (at your option)
12 #GNU CC is distributed in the hope that it will be useful,
13 #but WITHOUT ANY WARRANTY; without even the implied warranty of
14 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 #GNU General Public License for more details.
17 #You should have received a copy of the GNU General Public License
18 #along with GNU CC; see the file COPYING. If not, write to
19 #the Free Software Foundation, 59 Temple Place - Suite 330,
20 #Boston MA 02111-1307, USA.
22 # The targets for external use include:
23 # all, doc, proto, install, install-cross, install-cross-rest,
24 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
25 # stage1, stage2, stage3, stage4.
27 # Suppress smart makes who think they know how to automake Yacc files
30 # Directory where sources are, from where we are.
34 # Pointer to the GCC Project website
35 website
=http
://gcc.gnu.org
37 # Variables that exist for you to override.
38 # See below for how to change them for certain systems.
40 # List of language subdirectories.
41 # This is overridden by configure.
44 # Selection of languages to be made.
45 # This is overridden by configure.
46 CONFIG_LANGUAGES
= @all_languages@
47 LANGUAGES
= c gcov
$(exeext
) $(CONFIG_LANGUAGES
)
49 # Languages should create dependencies of $(INTL_TARGETS) on generated
50 # sources in Make-lang.in. Example:
51 # $(INTL_TARGETS): $(srcdir)/cp/parse.c
52 INTL_TARGETS
= intl.
all intl.
install intl.distdir
54 # Selection of languages to be made during stage1 build.
55 # This is overridden by configure.
56 BOOT_LANGUAGES
= c @all_boot_languages@
62 # Various ways of specifying flags for compilations:
63 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
64 # BOOT_CFLAGS is the value of CFLAGS to pass
65 # to the stage2 and stage3 compilations
66 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
67 # (And for stage 1 if the native compiler is GCC.) It is
68 # separate from BOOT_CFLAGS because people tend to override optimization
69 # flags and we'd like them to still have warnings turned on. They are free
70 # to explicitly turn warnings off if they wish.
71 # XCFLAGS is used for most compilations but not when using the GCC just built.
72 # TCFLAGS is used for compilations with the GCC just built.
75 CFLAGS
= -g @stage1_warn_cflags@
76 BOOT_CFLAGS
= -O2
$(CFLAGS
)
77 WARN_CFLAGS
= -W
-Wall
-Wtraditional
78 # These exists to be overridden by the x-* and t-* files, respectively.
87 # srcdir might be a relative pathname which won't be valid in a subdirectory,
88 # so we must use objdir/srcdir instead to make it safe. objdir is always
90 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
91 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
92 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
93 esac; else echo bison ; fi`
95 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
102 # on sysV, define this as cp.
104 # Some systems may be missing symbolic links, regular links, or both.
105 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
108 # These permit overriding just for certain files.
109 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
110 INSTALL_DATA
= @INSTALL_DATA@
111 MAKEINFO
= `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
112 then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
113 else echo makeinfo ; fi`
116 # For GNUmake: let us decide what gets passed to recursive makes.
120 # Define this as & to perform parallel make on a Sequent.
121 # Note that this has some bugs, and it seems currently necessary
122 # to compile all the gen* files first by hand to avoid erroneous results.
125 # How to invoke ranlib.
127 # Test to use to see whether ranlib exists on the system.
130 ||
[ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
]
132 # Compiler to use for compiling libgcc1.a.
133 # OLDCC should not be the GNU C compiler,
134 # since that would compile typical libgcc1.a functions such as mulsi3
135 # into infinite recursions.
138 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
139 # NOTE: -O does not work on some Unix systems!
142 # Version of ar to use when compiling libgcc1.a.
146 # Target to use when installing include directory. Either
147 # install-headers-tar or install-headers-cpio.
148 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
150 # Header files that are made available under the same name
151 # to programs compiled with GCC.
152 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
153 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/proto.h \
154 $(srcdir)/ginclude
/stdbool.h
$(srcdir)/ginclude
/iso646.h \
155 $(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
)
157 # Target to use whe installing assert.h. Some systems may
158 # want to set this empty.
159 INSTALL_ASSERT_H
= install-assert-h
161 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
162 # Usually the one we just built.
163 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
164 GCC_FOR_TARGET
= .
/xgcc
-B
$(build_tooldir
)/bin
/ -B.
/ -I
$(build_tooldir
)/include
166 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
167 # It omits XCFLAGS, and specifies -B./.
168 # It also specifies -I./include to find, e.g., stddef.h.
169 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
171 # Specify the abi to use when building the c++ runtime
172 GXX_ABI_FLAG
=@GXX_ABI_FLAG@
174 # Sed command to transform gcc to installed name. Overwritten by configure.
175 program_transform_name
= @program_transform_name@
176 program_transform_cross_name
= s
,^
,$(target_alias
)-,
178 build_canonical
= @build_canonical@
179 host_canonical
= @host_canonical@
181 # Tools to use when building a cross-compiler.
182 # These are used because `configure' appends `cross-make'
183 # to the makefile when making a cross-compiler.
185 # Use the tools from the build tree, if they are available.
187 # objdir is set by configure.
191 if [ -f $(objdir)/../binutils/ar ] ; then \
192 echo $(objdir)/../binutils/ar ; \
194 if [ "$(host_canonical)" = "$(target)" ] ; then \
197 t='$(program_transform_cross_name)'; echo ar | sed -e $$t ; \
200 AR_FLAGS_FOR_TARGET
= rc
201 RANLIB_FOR_TARGET
= ` \
202 if [ -f $(objdir)/../binutils/ranlib ] ; then \
203 echo $(objdir)/../binutils/ranlib ; \
205 if [ "$(host_canonical)" = "$(target)" ] ; then \
208 t='$(program_transform_cross_name)'; echo ranlib | sed -e $$t ; \
211 RANLIB_TEST_FOR_TARGET
= \
212 [ -f
$(RANLIB_FOR_TARGET
) ] \
213 ||
( [ "$(host_canonical)" = "$(target)" ] \
214 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
216 # Dir to search for system headers. Overridden by cross-make.
217 SYSTEM_HEADER_DIR
= /usr
/include
219 # Default cross SYSTEM_HEADER_DIR, to be overridden by targets.
220 CROSS_SYSTEM_HEADER_DIR
= $(tooldir
)/sys-include
222 # Control whether to run fixproto and fixincludes.
223 STMP_FIXPROTO
= stmp-fixproto
224 STMP_FIXINC
= stmp-fixinc
226 # Test to see whether <limits.h> exists in the system header files.
227 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
230 target_alias
=@target_alias@
231 xmake_file
=@dep_host_xmake_file@
232 tmake_file
=@dep_tmake_file@
233 out_file
=$(srcdir)/config
/@out_file@
234 out_object_file
=@out_object_file@
235 md_file
=$(srcdir)/config
/@md_file@
236 tm_file
=@tm_file_list@
237 build_xm_file
=@build_xm_file_list@
238 host_xm_file
=@host_xm_file_list@
239 lang_specs_files
=@lang_specs_files@
240 lang_options_files
=@lang_options_files@
241 lang_tree_files
=@lang_tree_files@
242 GCC_THREAD_FILE
=@thread_file@
243 OBJC_BOEHM_GC
=@objc_boehm_gc@
244 GTHREAD_FLAGS
=@gthread_flags@
245 # Be prepared for gcc2 merges.
246 gcc_version
=@gcc_version@
247 gcc_version_trigger
=@gcc_version_trigger@
248 version
=$(gcc_version
)
249 mainversion
=`grep version_string $(srcdir)/version.c | sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/'`
251 # Common prefix for installation directories.
252 # NOTE: This directory must exist when you start installation.
254 # Directory in which to put localized header files. On the systems with
255 # gcc as the native cc, `local_prefix' may not be `prefix' which is
257 # NOTE: local_prefix *should not* default from prefix.
258 local_prefix
= @local_prefix@
259 # Directory in which to put host dependent programs and libraries
260 exec_prefix = @
exec_prefix@
261 # Directory in which to put the executable for the command `gcc'
263 # Directory in which to put the directories used by the compiler.
265 # Directory in which the compiler finds executables, libraries, etc.
266 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
267 # Used to produce a relative $(gcc_tooldir) in gcc.o
268 unlibsubdir
= ..
/..
/..
269 # Directory in which to find other cross-compilation tools and headers.
271 # Used in install-cross.
272 gcc_tooldir
= @gcc_tooldir@
273 # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
274 build_tooldir
= $(exec_prefix)/$(target_alias
)
275 # Directory in which the compiler finds g++ includes.
276 gcc_gxx_include_dir
= @gcc_gxx_include_dir@
277 # Directory to search for site-specific includes.
278 includedir = $(local_prefix
)/include
279 # assertdir is overridden in cross-make.
280 # (But this currently agrees with what is in cross-make.)
281 assertdir
= $(gcc_tooldir
)/include
282 # where the info files go
284 # Where cpp should go besides $prefix/bin if necessary
285 cpp_install_dir
= @cpp_install_dir@
286 # where the locale files go
287 datadir = $(prefix)/@DATADIRNAME@
288 localedir
= $(datadir)/locale
289 # Extension (if any) to put in installed man-page filename.
292 exeext
= @host_exeext@
293 build_exeext
= @build_exeext@
295 # Directory in which to put man pages.
297 man1dir = $(mandir)/man1
298 # Dir for temp files.
301 # Top build directory, relative to here.
304 # Whether we were configured with NLS.
307 # Internationalization library.
308 INTLLIBS
= @INTLLIBS@
310 # List of internationalization subdirectories.
312 INTL_SUBDIRS
= intl
$(POSUB
)
314 # Additional system libraries to link with.
317 # Change this to a null string if obstacks are installed in the
321 # The GC method to be used on this system.
324 # If a supplementary library is being used for the GC.
327 # Configure will set these if you need vfprintf and possibly _doprnt support.
331 # Specify the rule for actually making libgcc.a,
333 # and the rule for installing it.
334 INSTALL_LIBGCC
= install-libgcc
336 # Specify the rule for actually making libgcc1.a.
337 # The value may be empty; that means to do absolutely nothing
338 # with or for libgcc1.a.
341 # Specify the rule for making libgcc1.a for a cross-compiler.
342 # The default rule assumes that libgcc1.a is supplied by the user.
343 CROSS_LIBGCC1
= libgcc1.cross
345 # Specify the rule for actually making libgcc2.a.
348 # Options to use when compiling libgcc2.a.
349 # -g1 causes output of debug info only for file-scope entities.
350 # we use this here because that should be enough, and also
351 # so that -g1 will be tested.
353 LIBGCC2_DEBUG_CFLAGS
= -g1
354 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
356 # Additional options to use when compiling libgcc2.a.
357 # Some targets override this to -Iinclude
360 # Additional target-dependent options for compiling libgcc2.a.
361 TARGET_LIBGCC2_CFLAGS
=
363 # libgcc1-test target (must also be overridable for a target)
364 LIBGCC1_TEST
= libgcc1-test
366 # List of extra executables that should be compiled for this target machine
367 # that are used for compiling from source code to object code.
368 # The rules for compiling them should be in the t-* file for the machine.
369 EXTRA_PASSES
=@extra_passes@
371 # Like EXTRA_PASSES, but these are used when linking.
372 EXTRA_PROGRAMS
= @extra_programs@
374 # List of extra object files that should be compiled for this target machine.
375 # The rules for compiling them should be in the t-* file for the machine.
376 EXTRA_PARTS
= @extra_parts@
378 # List of extra object files that should be compiled and linked with
379 # compiler proper (cc1, cc1obj, cc1plus).
380 EXTRA_OBJS
= @extra_objs@
382 # List of extra object files that should be compiled and linked with
384 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
386 # List of additional header files to install.
387 # Often this is edited directly by `configure'.
388 EXTRA_HEADERS
=@extra_headers_list@
390 # Set this to `collect2' to enable use of collect2.
391 USE_COLLECT2
= @will_use_collect2@
392 # If we might be using collect2, then this variable will be set to
393 # -DUSE_COLLECT2. toplev.c, collect2.c and libgcc2.c all need to
394 # if we may be using collect2.
395 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
396 # It is convenient for configure to add the assignment at the beginning,
397 # so don't override it here.
398 USE_COLLECT2
= collect2
$(exeext
)
400 # List of extra C and assembler files to add to libgcc1.a.
401 # Assembler files should have names ending in `.asm'.
404 # List of extra C and assembler files to add to libgcc2.a.
405 # Assembler files should have names ending in `.asm'.
408 # Handle cpp installation.
412 # We do not try to build float.h anymore. Let configure select the
413 # appropriate pre-built float.h file for the target.
414 FLOAT_H
=@float_h_file@
416 # Program to convert libraries.
419 # Control whether header files are installed.
420 INSTALL_HEADERS
=install-headers
422 # Additional directories of header files to run fixincludes on.
423 # These should be directories searched automatically by default
424 # just as /usr/include is.
425 # *Do not* use this for directories that happen to contain
426 # header files, but are not searched automatically by default.
427 # On most systems, this is empty.
428 OTHER_FIXINCLUDES_DIRS
=
430 # A list of all the language-specific executables.
431 # This is overridden by configure.
432 COMPILERS
= cc1
$(exeext
) @all_compilers@
434 # List of things which should already be built whenever we try to use xgcc
435 # to compile anything (without linking).
436 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
438 # List of things which should already be built whenever we try to use xgcc
440 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
442 # Directory to link to, when using the target `maketest'.
445 # Guaranteed to not exist when not passing md through cpp.
446 # This value is overridden directly by configure.
447 MD_FILE
= md-cpp-not-used
449 # Flags to use when cross-building GCC.
450 # Prefix to apply to names of object files when using them
451 # to run on the machine we are compiling on.
453 # Prefix to apply to names of object files when compiling them
454 # to run on the machine we are compiling on.
455 # The default for this variable is chosen to keep these rules
456 # out of the way of the other rules for compiling the same source files.
459 HOST_CFLAGS
=$(ALL_CFLAGS
)
461 HOST_INTLLIBS
=$(INTLLIBS
)
462 HOST_LDFLAGS
=$(LDFLAGS
)
463 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
464 HOST_ALLOCA
=$(ALLOCA
)
465 HOST_MALLOC
=$(MALLOC
)
466 HOST_OBSTACK
=$(OBSTACK
)
467 HOST_VFPRINTF
=$(VFPRINTF
)
468 HOST_DOPRINT
=$(DOPRINT
)
470 # Actual name to use when installing a native compiler.
471 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
472 CPP_INSTALL_NAME
= `t='$(program_transform_name)'; echo cpp | sed -e $$t`
473 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
474 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
475 GCOV_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcov | sed -e $$t`
477 # Actual name to use when installing a cross-compiler.
478 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
479 CPP_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo cpp | sed -e $$t`
480 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
481 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
483 # Choose the real default target.
486 # Choose the real install target.
487 INSTALL_TARGET
=install-normal
489 # Setup the testing framework, if you have one
490 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
491 echo $${rootme}/../expect/expect ; \
492 else echo expect ; fi`
494 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
495 echo $${srcdir}/../dejagnu/runtest ; \
496 else echo runtest; fi`
499 # Extra symbols for fixproto to define when parsing headers.
502 # Extra flags to use when compiling crt{begin,end}.o.
505 # Extra flags to use when compiling [m]crt0.o.
508 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
511 # End of variables for you to override.
513 # Definition of `all' is here so that new rules inserted by sed
514 # do not specify the default target.
515 # The real definition is under `all.internal' (for native compilers)
516 # or `all.cross' (for cross compilers).
519 # This tells GNU Make version 3 not to put all variables in the environment.
522 # sed inserts variable overrides after the following line.
536 # Now figure out from those variables how to compile and link.
540 # IN_GCC tells various files that system.h, toplev.c, etc are available.
541 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC @extra_c_flags@
543 # This is the variable actually used when we compile.
544 # If you change this line, you probably also need to change the definition
545 # of HOST_CFLAGS in build-make to match.
546 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
550 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
552 # Even if ALLOCA is set, don't use it if compiling with GCC.
553 USE_ALLOCA
= ${ALLOCA}
554 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
555 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
556 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
557 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
558 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
560 # Dependency on obstack, alloca, malloc or whatever library facilities
561 # are not installed in the system libraries.
562 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
563 LIBDEPS
= $(INTLLIBS
) $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
565 # Likewise, for use in the tools that must run on this machine
566 # even if we are cross-building GCC.
567 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
568 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_INTLLIBS
) $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
570 # How to link with both our special library facilities
571 # and the system's installed libraries.
572 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(INTLLIBS
) @LIBS@
$(VFPRINTF
) $(DOPRINT
) $(CLIB
) ..
/libiberty
/libiberty.a
574 # Likewise, for use in the tools that must run on this machine
575 # even if we are cross-building GCC.
576 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
577 $(HOST_INTLLIBS
) $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) \
580 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
$(HOST_PREFIX
)ggc-none.o
581 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
582 HOST_ERRORS
= $(HOST_PREFIX
)errors.o
584 # Specify the directories to be searched for header files.
585 # Both . and srcdir are used, in that order,
586 # so that tm.h and config.h will be found in the compilation
587 # subdirectory rather than in the source directory.
588 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
590 # Always use -I$(srcdir)/config when compiling.
592 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
594 # This tells GNU make version 3 not to export all the variables
595 # defined in this file into the environment.
598 # Support for additional languages (other than c and objc).
599 # ??? objc can be supported this way too (leave for later).
601 # These next lines are overridden by configure.
602 LANG_MAKEFILES
= @all_lang_makefiles@
603 LANG_STAGESTUFF
= @all_stagestuff@
604 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
605 LANG_LIB2FUNCS
= @all_lib2funcs@
606 LANG_EXTRA_HEADERS
= @all_headers@
608 # Flags to pass to recursive makes.
609 # CC is set by configure. Hosts without symlinks need special handling
610 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
612 # ??? The choices here will need some experimenting with.
613 ORDINARY_FLAGS_TO_PASS
= \
614 "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
615 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
617 "BISONFLAGS=$(BISONFLAGS)" \
620 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
621 "LDFLAGS=$(LDFLAGS)" \
623 "LEXFLAGS=$(LEXFLAGS)" \
626 "MAKEINFO=$(MAKEINFO)" \
627 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
628 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
629 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
631 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
633 "build_exeext=$(build_exeext)" \
635 "exec_prefix=$(exec_prefix)" \
637 "local_prefix=$(local_prefix)" \
638 "gxx_include_dir=$(gcc_gxx_include_dir)" \
639 "tooldir=$(tooldir)" \
640 "gcc_tooldir=$(gcc_tooldir)" \
642 "libsubdir=$(libsubdir)" \
643 "datadir=$(datadir)" \
644 "distdir=../tmp/\$$(subdir)" \
645 "localedir=$(localedir)"
646 FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) "CC=@cc_set_by_configure@"
647 PREPEND_DOTDOT_TO_RELATIVE_PATHS
= sed \
648 -e
's|^ *[^ /][^ /]*/|%&|' \
650 -e
's|% *[^- /]|%&|g' \
653 SUBDIR_FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) \
654 "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
656 # Lists of files for various purposes.
658 # Language-specific object files for C and Objective C.
659 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
660 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
662 # Language-specific object files for C.
663 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
665 # Language-independent object files.
666 OBJS
= diagnostic.o \
667 toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
668 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
669 builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
670 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
671 integrate.o jump.o cse.o loop.o unroll.o flow.o combine.o varray.o \
672 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
673 insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o \
674 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
675 profile.o insn-attrtab.o
$(out_object_file
) $(EXTRA_OBJS
) convert.o \
676 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o \
677 predict.o lists.o ggc-common.o
$(GGC
) simplify-rtx.o
679 # GEN files are listed separately, so they can be built before doing parallel
680 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
681 # them before rtl.o is compiled.
682 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
683 genpeep gengenrtl gencheck
687 # Files to be copied away after each stage in building.
688 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
689 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
690 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
691 s-flags s-config s-codes s-mlib s-unders s-genrtl \
692 s-output s-recog s-emit s-extract s-peep s-check \
693 s-attr s-attrtab s-opinit s-crt s-
$(T
)crtS s-crt0 \
694 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
695 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
696 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
697 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
698 gencheck
$(build_exeext
) \
699 xgcc
$(exeext
) xcpp
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
700 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
701 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
702 protoize
$(exeext
) unprotoize
$(exeext
) \
703 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
705 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
706 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse
*.flow2
*.peephole2 \
710 # Members of libgcc1.a.
711 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
712 _lshrsi3 _ashrsi3 _ashlsi3 \
713 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
714 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
715 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
716 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
717 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
719 # Library members defined in libgcc2.c.
720 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
721 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
722 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
723 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
724 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
725 _fixtfdi _fixunstfdi _floatditf \
726 __gcc_bcmp _varargs __dummy _eprintf \
727 _bb _shtab _clear_cache _trampoline __main _exit \
732 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
733 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
734 _lt_sf _le_sf _unord_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
735 _sf_to_df _thenan_sf _sf_to_usi _df_to_usi
737 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
738 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
739 _lt_df _le_df _unord_df _si_to_df _df_to_si _negate_df _make_df \
740 _df_to_sf _thenan_df _sf_to_usi _df_to_usi
742 # The files that "belong" in CONFIG_H are deliberately omitted
743 # because having them there would not be useful in actual practice.
744 # All they would do is cause complete recompilation every time
745 # one of the machine description files is edited.
746 # That may or may not be what one wants to do.
747 # If it is, rm *.o is an easy way to do it.
748 # CONFIG_H = $(host_xm_file) $(tm_file)
750 MACHMODE_H
= machmode.h machmode.def
751 RTL_BASE_H
= rtl.h rtl.def
$(MACHMODE_H
)
752 RTL_H
= $(RTL_BASE_H
) genrtl.h
753 TREE_H
= tree.h real.h tree.def
$(MACHMODE_H
) tree-check.h version.h
754 BASIC_BLOCK_H
= basic-block.h bitmap.h sbitmap.h varray.h
755 DEMANGLE_H
= $(srcdir)/..
/include/demangle.h
757 EXPR_H
= expr.h insn-codes.h
758 REGS_H
= regs.h varray.h
$(MACHMODE_H
)
759 INTEGRATE_H
= integrate.h varray.h
760 LOOP_H
= loop.h varray.h basic-block.h
761 GCC_H
= gcc.h version.h
763 # Language makefile fragments.
765 # The following targets define the interface between us and the languages.
767 # all.build, all.cross, start.encap, rest.encap,
769 # install-normal, install-common, install-info, install-man,
770 # uninstall, distdir,
771 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
772 # stage1, stage2, stage3, stage4
774 # Each language is linked in with a series of hooks (since we can't use `::'
775 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
776 # Configure computes and adds these here.
781 # sed inserts language fragments after the following line.
782 ####language fragments
785 # End of language makefile fragments.
787 # The only suffixes we want for implicit rules are .c and .o, so clear
788 # the list and add them. This speeds up GNU Make, and allows -r to work.
792 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
793 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
794 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
795 "$(xmake_file)" "$(tmake_file)"
796 cp config.status config.run
797 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.run
800 $(srcdir)/configure
: $(srcdir)/configure.in
801 cd
$(srcdir); autoconf
803 # cstamp-h.in controls rebuilding of config.in.
804 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
805 # delete it. A stamp file is needed as autoheader won't update the file if
806 # nothing has changed.
807 # It remains in the source directory and is part of the distribution.
808 # This follows what is done in shellutils, fileutils, etc.
809 # "echo timestamp" is used instead of touch to be consistent with other
810 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
811 # ??? Newer versions have a maintainer mode that may be useful here.
812 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
813 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
814 cd
$(srcdir) && autoheader
815 @
rm -f
$(srcdir)/cstamp-h.in
816 echo timestamp
> $(srcdir)/cstamp-h.in
817 auto-host.h
: cstamp-h
; @true
818 cstamp-h
: config.in config.status
819 CONFIG_HEADERS
=auto-host.h
:config.in LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
821 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
822 # a target to build even if it is up-to-date. So we must verify that
823 # config.status does not exist before failing.
824 config.status
: $(srcdir)/configure version.c
825 @if
[ ! -f config.status
] ; then \
826 echo You must configure gcc. Look at the INSTALL file for details.
; \
829 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
832 all.internal
: start.encap rest.encap doc
833 # This is what to compile if making a cross-compiler.
834 # Note that we can compile enquire using the cross-compiler just built,
835 # although we can't run it on this machine.
836 all.cross
: native gcc-cross xcpp
$(exeext
) specs \
837 $(LIBGCC
) $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross doc
838 # This is what to compile if making gcc with a cross-compiler.
839 all.build
: native xgcc
$(exeext
) xcpp
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
840 # This is what must be made before installing GCC and converting libraries.
841 start.encap
: native xgcc
$(exeext
) xcpp
$(exeext
) specs
$(LIBGCC1
) \
842 xlimits.h lang.start.encap
843 # These can't be made until after GCC can run.
844 rest.encap
: $(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
845 # This is what is made with the host's compiler
846 # whether making a cross compiler or not.
847 native
: config.status auto-host.h
cpp$(exeext
) intl.
all $(LANGUAGES
) \
848 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
850 # Define the names for selecting languages in LANGUAGES.
854 # Tell GNU make these are phony targets.
855 .PHONY
: C c PROTO proto
857 # On the target machine, finish building a cross compiler.
858 # This does the things that can't be done on the host machine.
859 rest.cross
: $(LIBGCC
) specs
861 # Verify that it works to compile and link libgcc1-test.
862 # If it does, then there are sufficient replacements for libgcc1.a.
863 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
864 @echo
"Testing libgcc1. Ignore linker warning messages."
865 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
866 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
867 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
868 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
870 # Recompile all the language-independent object files.
871 # This is used only if the user explicitly asks for it.
872 compilations
: ${OBJS}
874 # Create a list of the language-independent object files so the language
875 # subdirectories needn't mention their names explicitly.
876 stamp-objlist
: $(OBJS
)
877 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
879 # We call this executable `xgcc' rather than `gcc'
880 # to avoid confusion if the current directory is in the path
881 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
882 xgcc
$(exeext
): gcc.o gccspec.o version.o intl.o
prefix.o \
883 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
884 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o gccspec.o intl.o \
885 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
887 # We call this executable `xcpp' rather than `cpp'
888 # since the real preprocessor is named `cpp'. It too is renamed
889 # when it is installed.
890 # The only difference from xgcc is that it's linked with cppspec.o
891 # instead of gccspec.o.
892 xcpp
$(exeext
): gcc.o cppspec.o version.o intl.o
prefix.o \
893 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
894 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o cppspec.o intl.o \
895 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
897 # Dump a specs file to make -B./ read these specs over installed ones.
899 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
902 # We do want to create an executable named `xgcc', so we can use it to
904 # Also create gcc-cross, so that install-common will install properly.
905 gcc-cross
: xgcc
$(exeext
)
906 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
908 cc1
$(exeext
): $(P
) $(OBJS
) $(C_OBJS
) $(LIBDEPS
)
909 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJS
) $(C_OBJS
) $(LIBS
)
911 # Build the version of limits.h that we will install.
912 xlimits.h
: glimits.h limitx.h limity.h
913 if
$(LIMITS_H_TEST
) ; then \
914 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
916 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
918 mv tmp-xlimits.h xlimits.h
921 # This is done in two parts because some functions, in libgcc1.c,
922 # must be compiled with something other than GCC,
923 # while the rest, in libgcc2.c, must be compiled with xgcc.
924 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
926 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
927 # LIBCONVERT should put its output in libgcc1.conv.
928 libgcc1.conv
: libgcc1.a
929 $(LIBCONVERT
) libgcc1.a libgcc1.conv
931 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
932 # Make an empty file instead.
933 libgcc1.null
: $(GCC_PASSES
)
934 echo
"void __foo () {}" > dummy.c
935 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
936 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) libgcc1.null dummy
$(objext
)
937 rm -f dummy
$(objext
) dummy.c
939 # This is $(LIBGCC1) for a cross-compiler.
940 # We have no automatic way of building libgcc1.a,
941 # so it's up to the installer to find a way to do that.
942 # This rule deliberately does not depend on libgcc1.a
943 # so that it will fail if the installer hasn't provided it.
945 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
947 # Compile the library of arithmetic subroutines with the native compiler.
948 # Don't compile it with GCC!
949 # (That would cause most arithmetic functions to call themselves.)
951 # NOTE: If you modify these rules substantially, please be sure to
952 # check at least config/i386/t-sco5 and possibly other makefile
954 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
956 # Actually build it in tmplibgcc1.a, then rename at end,
957 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
958 # -e causes any failing command to make this rule fail.
959 # -e doesn't work in certain shells, so we test $$? as well.
960 # lynx has a broken ar, it always complains when the initial library is
961 # empty, thus this command works only if we don't do -e
962 # There is a trailing backslash (\) deleted from the following line.
964 for name in
$(LIB1FUNCS
); \
967 rm -f
$${name}$(objext
); \
968 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
969 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
970 mv libgcc1
$(objext
) $${name}$(objext
); \
971 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
972 rm -f
$${name}$(objext
); \
974 # Some shells crash when a loop has no items.
975 # So make sure there is always at least one--`..'.
977 # We don't use -e here because there are if statements
978 # that should not make the command give up when the if condition is false.
979 # Instead, we test for failure after each command where it matters.
980 for file in ..
$(LIB1FUNCS_EXTRA
); \
982 if
[ x
$${file} != x..
]; then \
983 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
985 if
[ $${name}.asm
= $${file} ]; then \
986 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
988 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
989 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
990 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
991 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
992 rm -f
$${name}.s
$${name}$(objext
); \
996 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
997 $(RANLIB_FOR_TARGET
) tmplibgcc1.a
; \
999 mv tmplibgcc1.a libgcc1.a
1001 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
1002 # functions. LIB1ASMSRC is the name of the source file in the config
1004 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
1005 -rm -f tmplibgcc1.a libgcc1.S
1006 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
1007 # Actually build it in tmplibgcc1.a, then rename at end,
1008 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
1009 # -e causes any failing command to make this rule fail.
1010 # -e doesn't work in certain shells, so we test $$? as well.
1011 # lynx has a broken ar, it always complains when the initial library is
1012 # empty, thus this command works only if we don't do -e
1013 # There is a trailing backslash (\) deleted from the following line.
1015 for name in
$(LIB1ASMFUNCS
); \
1018 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
1019 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1020 mv libgcc1
$(objext
) $${name}$(objext
); \
1021 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc1.a
$${name}$(objext
); \
1022 rm -f
$${name}$(objext
); \
1025 mv tmplibgcc1.a libgcc1-asm.a
1027 # Generate assembly versions of the functions required for libgcc1.
1028 # You'll still need to massage the code by hand (possibly hacking
1029 # underscores and local labels) but this will get you started.
1030 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
1033 for name in
$(LIB1FUNCS
); \
1036 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
1037 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1038 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
1039 cat libgcc1.s
>> libgcc1.S
; \
1040 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
1041 echo
"" >> libgcc1.S
; \
1044 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1045 # But recompiling cc1 should not force recompilation of libgcc2.a.
1046 # If you want to force recompilation, delete libgcc2.a.
1047 libgcc2.ready
: $(GCC_PASSES
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1048 -if
[ -f libgcc2.ready
] ; then \
1051 touch libgcc2.ready
; \
1054 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1055 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1056 $(MACHMODE_H
) longlong.h frame.h gbl-ctors.h config.status stmp-int-hdrs \
1058 # Actually build it in tmplibgcc2.a, then rename at end,
1059 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1061 # -e causes any failing command to make this rule fail.
1062 # -e doesn't work in certain shells, so we test $$? as well.
1063 # lynx has a broken ar, it always complains when the initial library is
1064 # empty, thus this command works only if we don't do -e
1065 # There is a trailing backslash (\) deleted from the following line.
1067 for name in
$(LIB2FUNCS
); \
1070 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1071 $(MAYBE_USE_COLLECT2
) $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1072 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1073 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1074 rm -f
$${name}$(objext
); \
1076 for name in
$(LIB2FUNCS_EH
); \
1079 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1080 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1081 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1082 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1083 rm -f
$${name}$(objext
); \
1085 if
[ x
$(FPBIT
) != x
]; then \
1086 for name in
$(FPBIT_FUNCS
); \
1089 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1090 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1091 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1092 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1093 rm -f
$${name}$(objext
); \
1096 if
[ x
$(DPBIT
) != x
]; then \
1097 for name in
$(DPBIT_FUNCS
); \
1100 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1101 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o _dp
$${name}$(objext
); \
1102 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1103 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a _dp
$${name}$(objext
); \
1104 rm -f _dp
$${name}$(objext
); \
1107 # Some shells crash when a loop has no items.
1108 # So make sure there is always at least one--`..'.
1110 # We don't use -e here because there are if statements
1111 # that should not make the command give up when the if condition is false.
1112 # Instead, we test for failure after each command where it matters.
1113 for file in
$(LIB2ADD
); do \
1114 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1115 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1116 if
[ $${name}.txt
= $${file} ]; then \
1117 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1118 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1119 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1120 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" CC
="$(CC)" \
1121 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1122 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1123 LANGUAGES
="$(LANGUAGES)" \
1124 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1125 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1126 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${f}; \
1132 if
[ $${name}.asm
= $${file} ]; then \
1133 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1135 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1136 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1137 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${oname}$(objext
); \
1138 rm -f
$${name}.s
$${oname}$(objext
); \
1141 mv tmplibgcc2.a libgcc2.a
1142 # These lines were deleted from above the mv command
1143 # because ranlibing libgcc.a itself should suffice.
1144 # -if [ x${HPUX_GAS} = x ] ; then \
1145 # if $(RANLIB_TEST_FOR_TARGET) ; then \
1146 # $(RANLIB_FOR_TARGET) tmplibgcc2.a;
1150 # Combine the various libraries into a single library, libgcc.a.
1151 # $(LIBGCC1) is added after $(LIBGCC2) so that routines written in
1152 # assembler will be used in preference to the C versions.
1153 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1154 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1156 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1157 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1158 # unwritable table of contents file, and then print an error message when
1159 # the second ar command tries to overwrite this file. To avoid the error
1160 # message from ar, we make sure all files are writable.
1161 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1162 -if
[ x
$(LIBGCC1
) != x
]; \
1163 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1166 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1168 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1169 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1171 # Actually build it in tmplibgcc.a, then rename at end,
1172 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1173 mv tmplibgcc.a libgcc.a
1175 # Use the genmultilib shell script to generate the information the gcc
1176 # driver program needs to select the library directory based on the
1178 multilib.h
: s-mlib
; @true
1179 s-mlib
: $(srcdir)/genmultilib Makefile
1180 $(SHELL
) $(srcdir)/genmultilib \
1181 "$(MULTILIB_OPTIONS)" \
1182 "$(MULTILIB_DIRNAMES)" \
1183 "$(MULTILIB_MATCHES)" \
1184 "$(MULTILIB_EXCEPTIONS)" \
1185 "$(MULTILIB_EXTRA_OPTS)" \
1186 "$(MULTILIB_EXCLUSIONS)" > tmp-mlib.h
1187 $(SHELL
) $(srcdir)/move-if-change tmp-mlib.h multilib.h
1190 # Build multiple copies of libgcc.a, one for each target switch.
1191 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1193 $(LIB2ADD
) $(MACHMODE_H
) longlong.h gbl-ctors.h config.status
1194 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1195 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1196 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1197 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1198 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1199 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1200 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1201 RANLIB_FOR_TARGET
="$(RANLIB_FOR_TARGET)" \
1202 RANLIB_TEST_FOR_TARGET
="$(RANLIB_TEST_FOR_TARGET)" \
1203 LANGUAGES
="$(LANGUAGES)" \
1204 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1205 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1206 MULTILIB_CFLAGS
="$${flags}" \
1207 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1208 dir="$${dir}" stmp-multilib-sub
; \
1209 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1213 # Subroutine of stmp-multilib so make -n works.
1216 if
[ -d
$(dir) ]; then \
1218 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1221 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1222 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1223 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1224 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1225 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1226 LANGUAGES
="$(LANGUAGES)" \
1227 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1228 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1230 else rm -f
$(LIBGCC1
); \
1232 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1235 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1236 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1237 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1238 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1239 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1240 LANGUAGES
="$(LANGUAGES)" \
1241 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1243 rm -rf tmplibgcc.a tmpcopy
1245 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1246 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1247 # unwritable table of contents file, and then print an error message when
1248 # the second ar command tries to overwrite this file. To avoid the error
1249 # message from ar, we make sure all files are writable.
1250 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1251 if
[ x
$(LIBGCC1
) != x
]; \
1252 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1255 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1256 rm -rf libgcc2.a tmpcopy
1257 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1258 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1260 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1261 mv tmplibgcc.a
$(dir)/libgcc.a
1262 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1263 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1264 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1265 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1266 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1267 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1268 LANGUAGES
="$(LANGUAGES)" \
1269 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1270 mv t
$${f} $(dir)/$${f}; \
1274 # Compile two additional files that are linked with every program
1275 # linked using GCC on systems using COFF or ELF, for the sake of C++
1277 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1278 defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
1279 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1280 -finhibit-size-directive
-fno-inline-functions \
1281 -fno-exceptions
$(CRTSTUFF_T_CFLAGS
) @inhibit_libc@ \
1282 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1284 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1285 defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
1286 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1287 -finhibit-size-directive
-fno-inline-functions \
1288 -fno-exceptions
$(CRTSTUFF_T_CFLAGS
) @inhibit_libc@ \
1289 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1291 # On some systems we also want to install versions of these files
1292 # compiled using PIC for use in shared libraries.
1293 $(T
)crtbeginS.o
$(T
)crtendS.o
: s-
$(T
)crtS
; @true
1295 s-
$(T
)crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1296 defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
1297 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1298 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive \
1299 -fno-inline-functions
-fno-exceptions @inhibit_libc@
-g0 \
1300 -c
$(srcdir)/crtstuff.c
-o
$(T
)crtbeginS
$(objext
)
1301 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1302 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive \
1303 -fno-inline-functions
-fno-exceptions @inhibit_libc@
-g0 \
1304 -c
$(srcdir)/crtstuff.c
-o
$(T
)crtendS
$(objext
)
1307 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1308 crt0.o
: s-crt0
; @true
1309 mcrt0.o
: s-crt0
; @true
1311 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1312 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1313 -o crt0.o
-c
$(CRT0_S
)
1314 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1315 -o mcrt0.o
-c
$(MCRT0_S
)
1318 # Compiling object files from source files.
1320 # Note that dependencies on obstack.h are not written
1321 # because that file is not part of GCC.
1323 # C language specific files.
1325 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h ggc.h \
1326 $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h toplev.h
1327 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1328 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1329 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1330 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d
-o c-parse.c c-parse.y
1331 $(srcdir)/c-parse.y
: c-parse.in
1332 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1333 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1334 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1335 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1336 $(SHELL
) $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1338 $(srcdir)/c-gperf.h
: c-parse.gperf
1339 gperf
-L C
-F
', 0, 0' -p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word \
1340 -k1
,3,$$ $(srcdir)/c-parse.gperf
>tmp-gperf.h ||
( \
1341 echo
"See " $(website
)/cvs.html
#generated_files >&2 ; \
1343 $(SHELL
) $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1345 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h ggc.h \
1346 c-lex.h flags.h function.h output.h toplev.h defaults.h
1347 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h \
1348 flags.h intl.h output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1349 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h ggc.h \
1350 c-lex.h toplev.h output.h function.h
1351 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1352 c-common.h
$(srcdir)/c-parse.h
$(srcdir)/c-gperf.h c-pragma.h input.h \
1353 intl.h flags.h toplev.h output.h mbchar.h ggc.h
1354 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h \
1355 c-common.h flags.h toplev.h
1356 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1357 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) function.h \
1358 defaults.h c-pragma.h toplev.h ggc.h
1359 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1360 c-common.h flags.h toplev.h
$(EXPR_H
)
1361 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h mbchar.h
1362 graph.o
: graph.c
$(CONFIG_H
) system.h toplev.h flags.h output.h
$(RTL_H
) \
1363 function.h hard-reg-set.h
$(BASIC_BLOCK_H
) graph.h
1364 sbitmap.o
: sbitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
)
1366 COLLECT2_OBJS
= collect2.o tlink.o hash.o intl.o underscore.o version.o
1367 collect2
$(exeext
): $(COLLECT2_OBJS
) $(LIBDEPS
)
1368 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1369 -rm -f collect2
$(exeext
)
1370 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(COLLECT2_OBJS
) $(LIBS
)
1372 collect2.o
: collect2.c
$(CONFIG_H
) system.h gstab.h intl.h \
1373 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
) collect2.h version.h
1374 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1375 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1376 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1378 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h collect2.h
1379 hash.o
: hash.c hash.h system.h toplev.h
1381 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h
1383 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1384 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1386 splay-tree.o
: $(srcdir)/..
/libiberty
/splay-tree.c \
1387 $(srcdir)/..
/include/splay-tree.h
$(srcdir)/..
/include/libiberty.h
1389 $(LN_S
) $(srcdir)/..
/libiberty
/splay-tree.c splay-tree.c
1390 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) splay-tree.c
1392 underscore.c
: s-under
; @true
1394 s-under
: $(GCC_PASSES
)
1395 echo
"int xxy_us_dummy;" >tmp-dum.c
1396 $(GCC_FOR_TARGET
) -S tmp-dum.c
1397 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1398 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1399 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1401 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1403 $(SHELL
) $(srcdir)/move-if-change tmp-under.c underscore.c
1404 -rm -f tmp-dum.c tmp-dum.s
1407 # A file used by all variants of C.
1409 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1410 c-common.h flags.h toplev.h output.h c-pragma.h
$(RTL_H
) ggc.h \
1413 # Language-independent files.
1416 -DSTANDARD_STARTFILE_PREFIX
=\"$(unlibsubdir
)/\" \
1417 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1418 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1419 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1420 -DSTANDARD_BINDIR_PREFIX
=\"$(bindir)/\" \
1421 -DTOOLDIR_BASE_PREFIX
=\"$(unlibsubdir
)/..
/\"
1422 gcc.o
: gcc.c
$(CONFIG_H
) system.h intl.h multilib.h \
1423 Makefile
$(lang_specs_files
) prefix.h
$(GCC_H
)
1424 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1426 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1428 gccspec.o
: gccspec.c
$(CONFIG_H
) system.h
$(GCC_H
)
1429 cppspec.o
: cppspec.c
$(CONFIG_H
) system.h
$(GCC_H
)
1431 tree-check.h
: s-check
; @true
1432 s-check
: gencheck
$(srcdir)/move-if-change
1433 .
/gencheck
> tmp-check.h
1434 $(SHELL
) $(srcdir)/move-if-change tmp-check.h tree-check.h
1437 gencheck
: gencheck.o
$(HOST_LIBDEPS
)
1438 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1439 gencheck.o
$(HOST_LIBS
)
1441 gencheck.o
: gencheck.c gencheck.h tree.def
$(CONFIG_H
) hconfig.h system.h \
1443 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1444 $(srcdir)/gencheck.c
1446 dumpvers
: dumpvers.c
1448 version.o
: version.c version.h
1450 ggc-common.o
: ggc-common.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) \
1451 flags.h ggc.h varray.h hash.h
1453 ggc-simple.o
: ggc-simple.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h \
1456 ggc-page.o
: ggc-page.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h \
1459 ggc-none.o
: ggc-none.c
$(CONFIG_H
) $(RTL_H
) ggc.h
1461 ggc-callbacks.o
: ggc-callbacks.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) ggc.h
1463 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1465 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1466 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1468 prefix.o
: prefix.c
$(CONFIG_H
) system.h Makefile
prefix.h
1469 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1470 -DPREFIX
=\"$(prefix)\" \
1471 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1473 convert.o
: convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h convert.h toplev.h
1475 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h \
1477 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
) ggc.h
1478 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1479 function.h
$(EXPR_H
) $(RTL_H
) toplev.h ggc.h
1480 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1482 diagnostic.o
: $(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) tm_p.h flags.h \
1483 input.h insn-attr.h insn-codes.h insn-config.h toplev.h intl.h
1484 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) function.h \
1485 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1486 insn-codes.h insn-config.h intl.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1487 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) $(BASIC_BLOCK_H
) graph.h loop.h \
1488 except.h regs.h
$(lang_options_files
)
1489 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1490 -DTARGET_NAME
=\"$(target_alias
)\" \
1491 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1493 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h ggc.h toplev.h
1495 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(BASIC_BLOCK_H
)
1496 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1497 errors.o
: errors.c
$(CONFIG_H
) system.h errors.h
1499 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1500 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1501 xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h ggc.h
1502 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1503 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1504 insn-config.h
$(RECOG_H
) output.h toplev.h except.h hash.h ggc.h
1505 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1506 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1507 $(LOOP_H
) $(RECOG_H
) toplev.h output.h varray.h ggc.h
1508 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1509 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1510 insn-config.h
$(RECOG_H
) output.h except.h toplev.h intl.h ggc.h
1511 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1512 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) \
1513 output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h \
1515 builtins.o
: builtins.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1516 function.h
$(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h \
1517 $(RECOG_H
) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
1519 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1520 insn-flags.h
$(REGS_H
) toplev.h output.h function.h
1521 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1522 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h toplev.h
1523 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1524 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h \
1525 insn-codes.h toplev.h function.h
1526 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1527 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h \
1528 toplev.h ggc.h real.h
1529 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1530 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1532 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1533 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1534 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1536 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1537 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1538 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1539 flags.h insn-config.h reload.h output.h defaults.h \
1540 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h varray.h \
1542 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1543 flags.h toplev.h output.h dbxout.h ggc.h
1544 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1545 function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h ggc.h \
1546 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h toplev.h
1547 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1548 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1549 $(INTEGRATE_H
) insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1550 intl.h function.h output.h
$(RECOG_H
) except.h toplev.h
$(LOOP_H
)
1551 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1552 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h function.h \
1553 toplev.h insn-attr.h
1555 simplify-rtx.o
: simplify-rtx.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) \
1556 hard-reg-set.h flags.h real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h \
1558 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1559 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h function.h ggc.h
1560 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1561 flags.h real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) \
1562 function.h output.h toplev.h
1563 resource.o
: resource.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h system.h \
1564 $(BASIC_BLOCK_H
) $(REGS_H
) flags.h output.h resource.h function.h toplev.h \
1566 lcm.o
: lcm.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1567 real.h insn-config.h insn-attr.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
)
1568 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1569 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h function.h insn-config.h \
1571 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(LOOP_H
) insn-config.h \
1572 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1573 $(BASIC_BLOCK_H
) function.h toplev.h varray.h except.h
1574 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h function.h \
1575 $(INTEGRATE_H
) $(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) $(LOOP_H
) toplev.h \
1577 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h insn-config.h \
1578 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h
$(RECOG_H
) \
1579 insn-flags.h function.h except.h
$(EXPR_H
)
1580 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h function.h \
1581 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1582 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1583 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1584 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h \
1585 toplev.h function.h output.h ggc.h
1586 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1587 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) \
1588 output.h function.h insn-attr.h toplev.h
1589 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1591 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h function.h \
1592 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1593 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1594 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1595 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1596 function.h real.h toplev.h
1597 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1598 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1599 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h function.h toplev.h
1600 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1601 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) function.h \
1602 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1603 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1604 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h insn-flags.h \
1605 $(RECOG_H
) function.h flags.h output.h
$(EXPR_H
) toplev.h
1606 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1607 $(REGS_H
) toplev.h output.h
$(EXPR_H
) insn-flags.h ggc.h function.h
1608 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1609 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h function.h \
1610 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1611 haifa-sched.o
: haifa-sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1612 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h function.h \
1613 insn-attr.h toplev.h
$(RECOG_H
) except.h
1614 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h intl.h \
1615 $(REGS_H
) $(RECOG_H
) conditions.h insn-config.h insn-attr.h function.h \
1616 real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
1617 xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
1619 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) function.h
$(BASIC_BLOCK_H
) \
1620 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1621 insn-flags.h insn-codes.h real.h toplev.h output.h resource.h
1622 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) $(RECOG_H
) \
1623 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
1625 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h
1626 predict.o
: predict.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1627 insn-config.h
$(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h \
1628 $(RECOG_H
) insn-flags.h function.h except.h
$(EXPR_H
)
1629 lists.o
: lists.c
$(CONFIG_H
) system.h toplev.h
$(RTL_H
) ggc.h
1631 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) ggc.h \
1632 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1633 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h function.h
1634 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1636 # Build auxiliary files that support ecoff format.
1637 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1638 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1640 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h version.h
1642 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1643 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1645 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1647 # Build file to support OSF/rose half-pic format.
1648 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1650 # Normally this target is not used; but it is used if you
1651 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1652 # from the GNU Emacs distribution.
1653 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1655 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1656 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1657 -c
`echo alloca.c | sed 's,^\./,,'`
1660 # Generate header and source files from the machine description,
1663 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1664 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1665 insn-attr.h insn-attrtab.c
1667 # The following pair of rules has this effect:
1668 # genconfig is run only if the md has changed since genconfig was last run;
1669 # but the file insn-config.h is touched only when its contents actually change.
1671 # Each of the other insn-* files is handled by a similar pair of rules.
1673 # This causes an anomaly in the results of make -n
1674 # because insn-* is older than s-*
1675 # and thus make -n thinks that insn-* will be updated
1676 # and force recompilation of things that depend on it.
1677 # We use move-if-change precisely to avoid such recompilation.
1678 # But there is no way to teach make -n that it will be avoided.
1680 # Each of the insn-*.[ch] rules has a semicolon at the end,
1681 # for otherwise the system Make on SunOS 4.1 never tries
1682 # to recompile insn-*.o. To avoid problems and extra noise from
1683 # versions of make which don't like empty commands (nothing after the
1684 # trailing `;'), we call true for each.
1686 insn-config.h
: s-config
; @true
1687 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1688 .
/genconfig
$(md_file
) > tmp-config.h
1689 $(SHELL
) $(srcdir)/move-if-change tmp-config.h insn-config.h
1692 insn-flags.h
: s-flags
; @true
1693 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1694 .
/genflags
$(md_file
) > tmp-flags.h
1695 $(SHELL
) $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1698 insn-codes.h
: s-codes
; @true
1699 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1700 .
/gencodes
$(md_file
) > tmp-codes.h
1701 $(SHELL
) $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1704 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1705 insn-config.h insn-flags.h insn-codes.h system.h reload.h
$(RECOG_H
) \
1706 function.h flags.h hard-reg-set.h resource.h
1707 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1709 insn-emit.c
: s-emit
; @true
1710 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1711 .
/genemit
$(md_file
) > tmp-emit.c
1712 $(SHELL
) $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1715 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1716 real.h output.h flags.h system.h function.h hard-reg-set.h resource.h
1717 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1719 insn-recog.c
: s-recog
; @true
1720 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1721 .
/genrecog
$(md_file
) > tmp-recog.c
1722 $(SHELL
) $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1725 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1726 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1727 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1729 insn-opinit.c
: s-opinit
; @true
1730 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1731 .
/genopinit
$(md_file
) > tmp-opinit.c
1732 $(SHELL
) $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1735 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h \
1736 insn-config.h
$(RECOG_H
)
1737 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1739 insn-extract.c
: s-extract
; @true
1740 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1741 .
/genextract
$(md_file
) > tmp-extract.c
1742 $(SHELL
) $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1745 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h \
1746 system.h insn-config.h
$(RECOG_H
) except.h function.h
1747 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1749 insn-peep.c
: s-peep
; @true
1750 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1751 .
/genpeep
$(md_file
) > tmp-peep.c
1752 $(SHELL
) $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1755 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1756 output.h insn-attr.h insn-config.h system.h toplev.h
$(RECOG_H
)
1757 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1759 insn-attr.h
: s-attr
; @true
1760 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1761 .
/genattr
$(md_file
) > tmp-attr.h
1762 $(SHELL
) $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1765 insn-attrtab.c
: s-attrtab
; @true
1766 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1767 .
/genattrtab
$(md_file
) > tmp-attrtab.c
1768 $(SHELL
) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1771 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) ggc.h
$(REGS_H
) real.h \
1772 conditions.h hard-reg-set.h insn-config.h insn-flags.h insn-attr.h \
1773 output.h
$(RECOG_H
) function.h insn-codes.h system.h toplev.h flags.h
1774 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1776 insn-output.c
: s-output
; @true
1777 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1778 .
/genoutput
$(md_file
) > tmp-output.c
1779 $(SHELL
) $(srcdir)/move-if-change tmp-output.c insn-output.c
1782 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h ggc.h
1783 genrtl.c genrtl.h
: s-genrtl
1784 @true
# force gnu make to recheck modification times.
1786 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1787 .
/gengenrtl
-h
>tmp-genrtl.h
1788 $(SHELL
) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1789 .
/gengenrtl
>tmp-genrtl.c
1790 $(SHELL
) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1793 # Compile the programs that generate insn-* from the machine description.
1794 # They are compiled with $(HOST_CC), and associated libraries,
1795 # since they need to run on this machine
1796 # even if GCC is being compiled to run on some other machine.
1798 # $(CONFIG_H) is omitted from the deps of the gen*.o
1799 # because these programs don't really depend on anything
1800 # about the target machine. They do depend on config.h itself,
1801 # since that describes the host machine.
1803 # Pass the md file through cpp if the target requests it.
1804 $(MD_FILE
): $(MD_DEPS
)
1806 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1809 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1810 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1811 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1813 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1814 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1816 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1817 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1818 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1820 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1821 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1823 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1824 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1825 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1827 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1828 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1830 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1831 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1832 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1834 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1835 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1837 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1838 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1839 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1841 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1842 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1844 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1845 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1846 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1848 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1849 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1851 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1852 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1853 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1855 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h errors.h
1856 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1858 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1859 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1860 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1862 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1863 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1865 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1866 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1867 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1869 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1870 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1872 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1873 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1874 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1876 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h errors.h ggc.h
1877 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1879 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1880 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1881 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1883 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1884 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1886 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1887 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1888 gengenrtl.o
$(HOST_LIBS
)
1890 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h real.h
1891 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1893 # Compile the libraries to be used by gen*.
1894 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1895 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1896 # with the rules for rtl.o, alloca.o, etc.
1897 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1898 bitmap.h ggc.h toplev.h
1899 rm -f
$(HOST_PREFIX
)rtl.c
1900 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1901 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1903 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) \
1904 $(RTL_H
) $(BASIC_BLOCK_H
) system.h
1905 rm -f
$(HOST_PREFIX
)print-rtl.c
1906 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1907 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1909 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1910 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1911 rm -f
$(HOST_PREFIX
)bitmap.c
1912 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1913 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1915 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1916 rm -f
$(HOST_PREFIX
)rtlanal.c
1917 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1918 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1920 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1921 rm -f
$(HOST_PREFIX
)alloca.c
1922 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1923 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1925 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1926 rm -f
$(HOST_PREFIX
)obstack.c
1927 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1928 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1930 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1931 rm -f
$(HOST_PREFIX
)vfprintf.c
1932 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1933 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1935 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1936 rm -f
$(HOST_PREFIX
)doprint.c
1937 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1938 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1940 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1941 rm -f
$(HOST_PREFIX
)malloc.c
1942 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1943 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1945 $(HOST_PREFIX_1
)errors.o
: errors.c
1946 rm -f
$(HOST_PREFIX
)errors.c
1947 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/errors.c
> $(HOST_PREFIX
)errors.c
1948 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)errors.c
1951 # This satisfies the dependency that we get if you cross-compile a compiler
1952 # that does not need to compile alloca, malloc or whatever.
1954 touch
$(HOST_PREFIX_1
)
1956 $(HOST_PREFIX_1
)ggc-none.o
: ggc-none.c
1957 rm -f
$(HOST_PREFIX
)ggc-none.c
1958 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/ggc-none.c
> $(HOST_PREFIX
)ggc-none.c
1959 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)ggc-none.c
1963 # Remake internationalization support.
1965 intl.o
: intl.c intl.h gansidecl.h Makefile
1966 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1967 -DLOCALEDIR
=\"$(localedir
)\" \
1968 -c
`echo $(srcdir)/intl.c | sed 's,^\./,,'`
1970 # This is needed to when doing a partial build after a `make clean'.
1971 # libintl.a does not depend on intl.all,
1972 # as that would force a lot of recompiling.
1973 $(top_builddir
)/intl
/libintl.a
:
1974 @echo
"$(MAKE) intl.all"
1975 @
$(MAKE
) $(FLAGS_TO_PASS
) intl.
all
1977 # Make sure all the headers are there for xgettext to scan.
1978 $(INTL_TARGETS
): $(srcdir)/c-gperf.h \
1979 $(srcdir)/c-parse.c
$(srcdir)/c-parse.h
$(srcdir)/cexp.c
1981 intl.
all intl.
install intl.
uninstall intl.distdir \
1982 intl.
mostlyclean intl.
clean intl.
distclean intl.maintainer-clean
:
1983 @for d in
$(INTL_SUBDIRS
); do \
1984 target
=`expr $@ : 'intl.\(.*\)'` && \
1985 echo
"(cd $$d && $(MAKE) $$target)" && \
1986 (cd
$$d && AWK
='$(AWK)' $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $$target); \
1989 # intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
1990 # but we need them for the `make extraclean' in distdir-finish.
1992 for d in
$(INTL_SUBDIRS
); do \
1993 ln
$$d/Makefile tmp
/$$d || cp
$$d/Makefile tmp
/$$d || exit
; \
1996 # Remake cpp and protoize.
1998 # Making the preprocessor
1999 cpp$(exeext
): $(CCCP
)$(exeext
)
2001 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
2002 CCCP_OBJS
= cccp.o cexp.o intl.o
prefix.o version.o @extra_cpp_objs@ mbchar.o
2003 cccp
$(exeext
): $(CCCP_OBJS
) $(LIBDEPS
)
2004 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(CCCP_OBJS
) $(LIBS
)
2005 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h mbchar.h
2006 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
2007 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
2008 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
2010 PREPROCESSOR_DEFINES
= \
2011 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2012 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
2013 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2014 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2015 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\"
2016 # We use $(libsubdir)/$(unlibsubdir) to match the
2017 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
2018 cccp.o
: cccp.c
$(CONFIG_H
) intl.h pcp.h version.c config.status system.h \
2019 mbchar.h
prefix.h Makefile.in version.h
2020 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2021 $(PREPROCESSOR_DEFINES
) \
2022 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
2024 LIBCPP_OBJS
= cpplib.o cpphash.o cpperror.o cppexp.o cppfiles.o \
2025 cppinit.o cppulp.o mkdeps.o \
2026 prefix.o version.o mbchar.o @extra_cpp_objs@
2028 # All the other archives built/used by this makefile are for targets. This
2029 # one is strictly for the host.
2031 libcpp.a
: $(LIBCPP_OBJS
)
2033 $(AR
) $(AR_FLAGS
) libcpp.a
$(LIBCPP_OBJS
)
2034 if
$(RANLIB_TEST
) ; then
$(RANLIB
) libcpp.a
; else true
; fi
2036 cppmain
$(exeext
): cppmain.o intl.o libcpp.a
$(LIBDEPS
)
2037 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o cppmain
$(exeext
) cppmain.o \
2038 intl.o libcpp.a
$(LIBS
)
2040 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h intl.h system.h
2042 cppulp.o
: cppulp.c
$(CONFIG_H
) system.h output.h
2043 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h mkdeps.h
2044 cpphash.o
: cpphash.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h version.h
2045 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h intl.h system.h
2046 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h intl.h system.h
2047 cppfiles.o
: cppfiles.c
$(CONFIG_H
) cpplib.h intl.h system.h
2049 cppinit.o
: cppinit.c
$(CONFIG_H
) cpplib.h intl.h system.h \
2050 cpphash.h
prefix.h output.h Makefile version.h mkdeps.h
2051 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2052 $(PREPROCESSOR_DEFINES
) \
2053 -c
`echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
2055 mkdeps.o
: mkdeps.c
$(CONFIG_H
) system.h mkdeps.h
2057 # Note for the stamp targets, we run the program `true' instead of
2058 # having an empty command (nothing following the semicolon).
2060 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
2062 PROTO_OBJS
= intl.o version.o
2064 protoize
$(exeext
): protoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2065 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ protoize.o
$(PROTO_OBJS
) $(LIBS
)
2067 unprotoize
$(exeext
): unprotoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2068 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ unprotoize.o
$(PROTO_OBJS
) $(LIBS
)
2070 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h \
2072 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2073 $(DRIVER_DEFINES
) $(PREPROCESSOR_DEFINES
) \
2074 $(srcdir)/protoize.c
2076 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h \
2077 $(CONFIG_H
) system.h Makefile version.h
2078 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2079 $(DRIVER_DEFINES
) $(PREPROCESSOR_DEFINES
) \
2080 $(srcdir)/unprotoize.c
2082 # This info describes the target machine, so compile with GCC just built.
2083 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
2085 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2086 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
2087 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2088 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
2089 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2092 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
2093 -rm -f tmp-proto.
[cso
]
2094 cp
$(srcdir)/protoize.c tmp-proto.c
2095 chmod u
+w tmp-proto.c
2096 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2097 $(GCC_CFLAGS) $(INCLUDES) \
2098 -DGCC_INCLUDE_DIR=0 \
2099 -DGPLUSPLUS_INCLUDE_DIR=0 \
2100 -DCROSS_INCLUDE_DIR=0 \
2101 -DTOOL_INCLUDE_DIR=0 \
2102 -DSTANDARD_EXEC_PREFIX=0 \
2103 -DDEFAULT_TARGET_MACHINE=0 \
2104 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2105 @echo
'**********' Expect
400 lines of differences.
2106 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
2107 -wc
-l tmp-proto.diff
2108 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2109 $(GCC_CFLAGS) $(INCLUDES) \
2110 -DGCC_INCLUDE_DIR=0 \
2111 -DGPLUSPLUS_INCLUDE_DIR=0 \
2112 -DCROSS_INCLUDE_DIR=0 \
2113 -DTOOL_INCLUDE_DIR=0 \
2114 -DSTANDARD_EXEC_PREFIX=0 \
2115 -DDEFAULT_TARGET_MACHINE=0 \
2116 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2117 @echo Expect zero differences.
2118 diff
$(srcdir)/protoize.c tmp-proto.c | cat
2119 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
2121 gcov.o
: gcov.c gcov-io.h intl.h system.h
2123 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2124 # upon whether $(exeext) is empty or not.
2125 GCOV_OBJS
= gcov.o intl.o
2126 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
2127 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) $(LIBS
) -o
$@
2129 # Build the include directory. The stamp files are stmp-* rather than
2130 # s-* so that mostlyclean does not force the include directory to
2133 # Build the include directory including float.h (which no longer depends upon
2135 stmp-int-hdrs
: $(STMP_FIXINC
) $(USER_H
) xlimits.h
2136 # Copy in the headers provided with gcc.
2137 # The sed command gets just the last file name component;
2138 # this is necessary because VPATH could add a dirname.
2139 # Using basename would be simpler, but some systems don't have it.
2140 # The touch command is here to workaround an AIX/Linux NFS bug.
2141 for file in ..
$(USER_H
); do \
2142 if
[ X
$$file != X..
]; then \
2143 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2144 touch
include/$$realfile; \
2145 rm -f
include/$$realfile; \
2146 cp
$$file include; \
2147 chmod a
+r
include/$$realfile; \
2150 rm -f
include/limits.h
2151 cp xlimits.h
include/limits.h
2152 chmod a
+r
include/limits.h
2153 rm -f
include/float.h
2154 if
[ x
$(FLOAT_H
) != xMakefile.in
]; then \
2155 cp
$(srcdir)/config
/$(FLOAT_H
) include/float.h
&& \
2156 chmod a
+r
include/float.h
; \
2158 # Install the README
2159 rm -f
include/README
2160 cp
$(srcdir)/README-fixinc
include/README
2161 chmod a
+r
include/README
2164 # fixinc.sh depends on this, not on specs directly.
2165 # The idea is to make sure specs gets built, but not rerun fixinc.sh
2166 # after each stage just because specs' mtime has changed.
2168 -if
[ -f specs.ready
] ; then \
2171 touch specs.ready
; \
2174 FIXINCSRCDIR
=$(srcdir)/fixinc
2175 fixinc.sh
: $(FIXINCSRCDIR
)/mkfixinc.sh
$(FIXINCSRCDIR
)/fixincl.c \
2176 $(FIXINCSRCDIR
)/procopen.c
$(FIXINCSRCDIR
)/gnu-regex.c \
2177 $(FIXINCSRCDIR
)/server.c
$(FIXINCSRCDIR
)/gnu-regex.h \
2178 $(FIXINCSRCDIR
)/server.h
$(FIXINCSRCDIR
)/inclhack.def specs.ready
2179 MAKE
="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
2180 export MAKE
srcdir ; \
2181 cd .
/fixinc
; $(SHELL
) $${srcdir}/mkfixinc.sh
$(target
)
2183 # Build fixed copies of system files.
2184 stmp-fixinc
: fixinc.sh gsyslimits.h
2185 rm -rf
include; mkdir
include
2187 TARGET_MACHINE
=$(target
); srcdir=`cd $(srcdir); pwd`; \
2188 INSTALL_ASSERT_H
=$(INSTALL_ASSERT_H
); SHELL
=$(SHELL
) ;\
2189 export TARGET_MACHINE
srcdir INSTALL_ASSERT_H SHELL
; \
2190 $(SHELL
) .
/fixinc.sh
`pwd`/include $(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
)
2191 rm -f
include/syslimits.h
2192 if
[ -f
include/limits.h
]; then \
2193 mv
include/limits.h
include/syslimits.h
; \
2195 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2197 chmod a
+r
include/syslimits.h
2198 # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
2199 # that directory exists, then make sure that $(libsubdir) exists.
2200 # This is because cpp is compiled to find $(tooldir)/include via
2201 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2203 # We deliberately use tooldir instead of gcc_tooldir here. gcc_tooldir
2204 # won't work because libsubdir doesn't exist yet.
2205 if
[ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
2206 && [ -d
$(tooldir
)/sys-include
]; then \
2207 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2208 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2209 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2210 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2214 # Files related to the fixproto script.
2215 # gen-protos and fix-header are compiled with HOST_CC, but they are only
2216 # used in native and host-x-target builds, so it's safe to link them with
2219 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2220 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2222 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2224 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2225 mv tmp-deduced.h deduced.h
; \
2230 GEN_PROTOS_OBJS
= gen-protos.o scan.o
2231 gen-protos
: $(GEN_PROTOS_OBJS
)
2232 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o gen-protos \
2233 $(GEN_PROTOS_OBJS
) ..
/libiberty
/libiberty.a
2235 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2236 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2238 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2239 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2241 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2242 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2243 mv tmp-fixtmp.c fixtmp.c
2244 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2245 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2246 | .
/gen-protos
>xsys-protos.hT
2247 mv xsys-protos.hT xsys-protos.h
2250 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2252 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2253 scan-decls.o scan.o libcpp.a
$(HOST_LIBS
) ..
/libiberty
/libiberty.a
2255 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2256 xsys-protos.h
$(build_xm_file
) system.h cpplib.h
2257 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2259 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
) system.h
2260 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2262 # stmp-fixproto depends on this, not on fix-header directly.
2263 # The idea is to make sure fix-header gets built,
2264 # but not rerun fixproto after each stage
2265 # just because fix-header's mtime has changed.
2266 fixhdr.ready
: fix-header
2267 -if
[ -f fixhdr.ready
] ; then \
2270 touch fixhdr.ready
; \
2273 # stmp-int-headers is to make sure fixincludes has already finished.
2274 # The if statement is so that we don't run fixproto a second time
2275 # if it has already been run on the files in `include'.
2276 stmp-fixproto
: fixhdr.ready fixproto stmp-int-hdrs
2277 @echo
"Various warnings and error messages from fixproto are normal"
2278 -if
[ -d
include ] ; then true
; else mkdir
include; chmod a
+rx
include; fi
2279 -if
[ -f
include/fixed
] ; then true
; \
2281 : This line works around a
'make' bug in BSDI
1.1.
; \
2282 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2283 mkinstalldirs
="$(SHELL) $(srcdir)/mkinstalldirs"; \
2284 export mkinstalldirs
; \
2285 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2286 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2288 touch
include/fixed
; \
2292 # Remake the info files.
2295 info: cpp.
info gcc.
info lang.
info
2297 cpp.
info: $(srcdir)/cpp.texi
2298 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2300 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2301 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2302 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2303 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2305 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2307 # This works with GNU Make's default rule.
2308 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2309 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2310 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2311 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2313 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2315 cpp.
dvi: $(srcdir)/cpp.texi
2316 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2318 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2321 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2322 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2323 --no-split
-o INSTALL install1.texi
2325 # Deletion of files made during compilation.
2326 # There are four levels of this:
2327 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2328 # `mostlyclean' is useful while working on a particular type of machine.
2329 # It deletes most, but not all, of the files made by compilation.
2330 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2331 # `clean' deletes everything made by running `make all'.
2332 # `distclean' also deletes the files made by config.
2333 # `maintainer-clean' also deletes everything that could be regenerated
2334 # automatically, except for `configure'.
2335 # We remove as much from the language subdirectories as we can
2336 # (less duplicated code).
2338 INTL_MOSTLYCLEAN
= intl.
mostlyclean
2339 mostlyclean: $(INTL_MOSTLYCLEAN
) lang.
mostlyclean
2340 -rm -f
$(STAGESTUFF
)
2341 # Delete the temporary source copies for cross compilation.
2342 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2343 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2344 -rm -f
$(HOST_PREFIX_1
)obstack.c
2345 # Delete the temp files made in the course of building libgcc.a.
2346 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2347 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2348 # Delete other built files.
2349 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2350 # Delete the stamp and temporary files.
2351 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2352 -rm -f
*/stamp-
* */tmp-
*
2353 # Delete debugging dump files.
2354 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2355 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2356 -rm -f
*.regmove
*.mach
*.bp
*.gcse
*.flow2
*.peephole2
2357 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2358 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2359 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
*/*.flow2
2360 -rm -f
*/*.peephole2
2361 # Delete some files made during installation.
2362 -rm -f specs float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2363 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2364 # Delete files generated for fixproto
2365 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2366 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2367 # Delete unwanted output files from TeX.
2368 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2369 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2370 # Delete sorted indices we don't actually use.
2371 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2372 # Delete core dumps.
2376 # Delete all files made by compilation
2377 # that don't exist in the distribution.
2378 INTL_CLEAN
= intl.
clean
2379 clean: mostlyclean $(INTL_CLEAN
) lang.
clean
2380 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2384 -if
[ -f md.pre-cpp
]; then \
2387 # Delete the include directory.
2389 # Delete files used by the "multilib" facility (including libgcc subdirs).
2390 -rm -f multilib.h tmpmultilib
*
2391 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2392 rm -rf
$(MULTILIB_DIRNAMES
); \
2393 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2394 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2396 -rm -fr stage1 stage2 stage3 stage4
2398 # Delete all files that users would normally create
2399 # while building and installing GCC.
2400 INTL_DISTCLEAN
= intl.
distclean
2401 distclean: clean $(INTL_DISTCLEAN
) lang.
distclean
2402 -rm -f tm.h tm_p.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2404 -rm -f config.status config.run config.cache config.bak
2405 -rm -f Make-lang Make-hooks Make-host Make-target
2406 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2407 -rm -f gthr-default.h
2408 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2409 -rm -f c-parse.output
2412 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2413 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2414 -rm -f intl
/libintl.h libintl.h
2416 # Delete anything likely to be found in the source directory
2417 # that shouldn't be in the distribution.
2418 extraclean
: distclean lang.extraclean
2419 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2420 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2421 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2422 -rm -f config
/*/*.orig config
/*/*.rej
2423 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2424 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2425 -rm -f
*lose config
/*lose config
/*/*lose
2426 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2427 -rm -f y.tab.c
yacc.
*
2428 -rm -f
*/=* */"#"* */*~
*
2429 -rm -f
*/patch
* */*.orig
*/*.rej
2430 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2431 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2432 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2434 # Get rid of every file that's generated from some other file, except for `configure'.
2435 # Most of these files ARE PRESENT in the GCC distribution.
2436 # We define INTL_DISTCLEAN, INTL_CLEAN & INTL_MOSTLYCLEAN to be empty in the
2437 # submake, so that we don't descend into intl after its makefile has been
2440 @echo
'This command is intended for maintainers to use; it'
2441 @echo
'deletes files that may need special tools to rebuild.'
2442 $(MAKE
) INTL_DISTCLEAN
= INTL_CLEAN
= INTL_MOSTLYCLEAN
= \
2443 intl.maintainer-clean lang.maintainer-clean
distclean
2444 -rm -f c-parse.y c-gperf.h
2445 -rm -f c-parse.c c-parse.h c-parse.output
2446 -rm -f cexp.c cexp.output TAGS
2447 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2448 -rm -f gcc.
info* gcc.??s gcc.
*aux
2450 # Entry points `install' and `uninstall'.
2451 # Also use `install-collect2' to install collect2 when the config files don't.
2453 # The semicolon is to prevent the install.sh -> install default rule
2454 # from doing anything. Having it run true helps avoid problems and
2455 # noise from versions of make which don't like to have null commands.
2456 install: $(INSTALL_TARGET
) ; @true
2458 # Copy the compiler files into directories where they will be run.
2459 # Install the driver last so that the window when things are
2461 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2462 $(INSTALL_CPP
) install-man install-info intl.
install lang.install-normal \
2465 # Do nothing while making gcc with a cross-compiler. The person who
2466 # makes gcc for the target machine has to know how to put a complete
2467 # gcc together by hand.
2468 install-build
: force
2469 @echo You have to
install gcc on your target machine by hand.
2471 # Run this on the target machine
2472 # to finish installation of cross compiler.
2473 # This is not used anymore now that float.h does not depend on enquire.
2474 install-cross-rest
: install-float-h-cross
2476 # Handle cpp installation.
2477 install-cpp
: xcpp
$(exeext
)
2478 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2479 rm -f
$(bindir)/$(CPP_CROSS_NAME
)$(exeext
); \
2480 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(bindir)/$(CPP_CROSS_NAME
)$(exeext
); \
2481 if
[ x
$(cpp_install_dir
) != x
]; then \
2482 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_CROSS_NAME
)$(exeext
); \
2483 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(prefix)/$(cpp_install_dir
)/$(CPP_CROSS_NAME
)$(exeext
); \
2486 rm -f
$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
); \
2487 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(bindir)/$(CPP_INSTALL_NAME
)$(exeext
); \
2488 if
[ x
$(cpp_install_dir
) != x
]; then \
2489 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2490 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2495 -rm -f
$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2496 -rm -f
$(bindir)/$(CPP_CROSS_NAME
)$(exeext
)
2497 -if
[ x
$(cpp_install_dir
) != x
]; then \
2498 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2499 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_CROSS_NAME
)$(exeext
); \
2502 # Install float.h for cross compiler.
2503 # Run this on the target machine!
2504 # This is not used anymore now that float.h does not depend on enquire.
2505 install-float-h-cross
: installdirs
2506 # if [ -f enquire ] ; then true; else false; fi
2507 # Note: don't use -. We should fail right away if enquire was not made.
2508 .
/enquire
-f
> $(tmpdir
)/float.h
2509 -rm -f
$(libsubdir
)/include/float.h
2510 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2511 -rm -f
$(tmpdir
)/float.h
2512 chmod a-x
$(libsubdir
)/include/float.h
2514 # Create the installation directories.
2516 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2517 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2518 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2519 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2520 # This dir isn't currently searched by cpp.
2521 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2522 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2523 fdir
=$${fdir}/$${dir}; \
2524 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2526 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2527 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2528 -if
[ -d
$(gcc_tooldir
) ] ; then true
; else mkdir
$(gcc_tooldir
) ; chmod a
+rx
$(gcc_tooldir
) ; fi
2529 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2530 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2531 # We don't use mkdir -p to create the parents of man1dir,
2532 # because some systems don't support it.
2533 # Instead, we use this technique to create the immediate parent of man1dir.
2534 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
2535 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2536 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; chmod a
+rx
$(man1dir) ; fi
2538 # Install the compiler executables built during cross compilation.
2539 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2540 for file in
$(COMPILERS
); do \
2541 if
[ -f
$$file ] ; then \
2542 rm -f
$(libsubdir
)/$$file; \
2543 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2547 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2548 if
[ x
"$$file" != x..
]; then \
2549 rm -f
$(libsubdir
)/$$file; \
2550 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2553 for file in
$(EXTRA_PARTS
) ..
; do \
2554 if
[ x
"$$file" != x..
]; then \
2555 rm -f
$(libsubdir
)/$$file; \
2556 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2557 chmod a-x
$(libsubdir
)/$$file; \
2560 # Don't mess with specs if it doesn't exist yet.
2561 -if
[ -f specs
] ; then \
2562 rm -f
$(libsubdir
)/specs
; \
2563 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2564 chmod a-x
$(libsubdir
)/specs
; \
2566 # Install protoize if it was compiled.
2567 -if
[ -f protoize
$(exeext
) ]; \
2569 if
[ -f gcc-cross
$(exeext
) ] ; then \
2570 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2571 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2572 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2573 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2575 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2576 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2577 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2578 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2580 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2581 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2582 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2584 -rm -f
$(libsubdir
)/cpp$(exeext
)
2585 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2586 # Install gcov if it was compiled.
2587 -if
[ -f gcov
$(exeext
) ]; \
2589 rm -f
$(bindir)/gcov
$(exeext
); \
2590 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
2593 # Install the driver program as $(target_alias)-gcc
2594 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2595 install-driver
: xgcc
$(exeext
)
2596 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2597 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2598 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2599 if
[ -d
$(gcc_tooldir
)/bin
/.
] ; then \
2600 rm -f
$(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2601 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2604 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2605 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2606 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2607 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2608 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2611 # Install the info files.
2612 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2613 # to do the install.
2614 install-info
: doc
installdirs lang.install-info
2615 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2616 for f in
cpp.
info* gcc.
info*; do \
2617 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2619 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2620 if
[ -f
$(infodir)/dir ] ; then \
2621 for f in
cpp.
info gcc.
info; do \
2622 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2626 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2628 # Install the man pages.
2629 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2630 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2631 rm -f
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2632 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2633 chmod a-x
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2635 rm -f
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2636 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2637 chmod a-x
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2639 -rm -f
$(man1dir)/cccp
$(manext)
2640 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(man1dir)/cccp
$(manext)
2641 -chmod a-x
$(man1dir)/cccp
$(manext)
2643 # Install the library.
2644 install-libgcc
: libgcc.a
installdirs
2645 -if
[ -f libgcc.a
] ; then \
2646 rm -f
$(libsubdir
)/libgcc.a
; \
2647 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2648 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
2649 (cd
$(libsubdir
); $(RANLIB_FOR_TARGET
) libgcc.a
); else true
; fi
; \
2650 chmod a-x
$(libsubdir
)/libgcc.a
; \
2653 # Install multiple versions of libgcc.a.
2654 install-multilib
: stmp-multilib
installdirs
2655 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2656 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2657 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; chmod a
+rx
$(libsubdir
)/$${dir}; fi
; \
2658 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2659 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2660 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2662 if
$(RANLIB_TEST_FOR_TARGET
); then \
2663 (cd
$(libsubdir
)/$${dir}; $(RANLIB_FOR_TARGET
) libgcc.a
); \
2665 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2668 # Install all the header files built in the include subdirectory.
2669 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2670 # Fix symlinks to absolute paths in the installed include directory to
2671 # point to the installed directory, not the build directory.
2672 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2673 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2674 if
[ $$?
-eq
0 ]; then \
2675 dir=`cd include; pwd`; \
2676 for i in
$$files; do \
2677 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2678 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2679 rm -f
$(libsubdir
)/include/$$i; \
2680 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2685 # Create or recreate the gcc private include file directory.
2686 install-include-dir
: installdirs
2687 -rm -rf
$(libsubdir
)/include
2688 mkdir
$(libsubdir
)/include
2689 -chmod a
+rx
$(libsubdir
)/include
2691 # Install the include directory using tar.
2692 install-headers-tar
: stmp-int-hdrs
$(STMP_FIXPROTO
) install-include-dir
2693 # We use `pwd`/include instead of just include to problems with CDPATH
2694 # Unless a full pathname is provided, some shells would print the new CWD,
2695 # found in CDPATH, corrupting the output. We could just redirect the
2696 # output of `cd', but some shells lose on redirection within `()'s
2697 (cd
`pwd`/include ; \
2698 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar xpf
- )
2699 # /bin/sh on some systems returns the status of the first tar,
2700 # and that can lose with GNU tar which always writes a full block.
2701 # So use `exit 0' to ignore its exit status.
2703 # Install the include directory using cpio.
2704 install-headers-cpio
: stmp-int-hdrs
$(STMP_FIXPROTO
) install-include-dir
2705 # See discussion about the use of `pwd` above
2706 cd
`pwd`/include ; \
2707 find .
-print | cpio
-pdum
$(libsubdir
)/include
2709 # Put assert.h where it won't override GNU libc's assert.h.
2710 # It goes in a dir that is searched after GNU libc's headers;
2711 # thus, the following conditionals are no longer needed.
2712 # But it's not worth deleting them now.
2713 ## Don't replace the assert.h already there if it is not from GCC.
2714 ## This code would be simpler if it tested for -f ... && ! grep ...
2715 ## but supposedly the ! operator is missing in sh on some systems.
2716 install-assert-h
: assert.h
installdirs
2717 if
[ -f
$(assertdir
)/assert.h
]; \
2719 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2721 rm -f
$(assertdir
)/assert.h
; \
2722 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2723 chmod a-x
$(assertdir
)/assert.h
; \
2727 rm -f
$(assertdir
)/assert.h
; \
2728 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2729 chmod a-x
$(assertdir
)/assert.h
; \
2732 # Use this target to install the program `collect2' under the name `collect2'.
2733 install-collect2
: collect2
installdirs
2734 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2735 # Install the driver program as $(libsubdir)/gcc for collect2.
2736 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2738 # Cancel installation by deleting the installed files.
2739 uninstall: intl.
uninstall lang.
uninstall $(UNINSTALL_CPP
)
2740 -rm -rf
$(libsubdir
)
2741 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2742 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2743 -rm -rf
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
)
2744 -rm -rf
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
)
2745 -rm -rf
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
)
2746 -rm -rf
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
)
2747 -rm -rf
$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
2748 -rm -rf
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext)
2749 -rm -rf
$(man1dir)/$(GCC_CROSS_NAME
)$(manext)
2750 -rm -rf
$(man1dir)/cccp
$(manext)
2751 -rm -rf
$(man1dir)/protoize
$(manext)
2752 -rm -rf
$(man1dir)/unprotoize
$(manext)
2753 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2755 # These targets are for the dejagnu testsuites. The file site.exp
2756 # contains global variables that all the testsuites will use.
2758 # Set to $(target_alias)/ for cross.
2759 target_subdir
= @target_subdir@
2761 site.exp
: .
/config.status Makefile
2762 @echo
"Making a new config file..."
2765 -@mv site.exp site.bak
2766 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2767 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2768 @echo
"# add them to the last section" >> .
/tmp0
2769 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2770 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2771 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2772 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2773 @echo
"set target_triplet $(target)" >> .
/tmp0
2774 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2775 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2776 @echo
"set CFLAGS \"\"" >> .
/tmp0
2777 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2778 # If newlib has been configured, we need to pass -B to gcc so it can find
2779 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2780 # message if it doesn't, but the testsuite is supposed to ignore the message -
2781 # it's too difficult to tell when to and when not to pass -B (not all targets
2782 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2783 # seems like too selective a test.
2784 # ??? Another way to solve this might be to rely on linker scripts. Then
2785 # theoretically the -B won't be needed.
2786 # We also need to pass -L ../ld so that the linker can find ldscripts.
2787 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2788 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2789 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2790 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2791 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2792 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2795 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2796 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2799 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2800 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2801 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2802 @cat .
/tmp0
> site.exp
2803 @cat site.bak | sed \
2804 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2807 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2809 check: $(CHECK_TARGETS
)
2811 testsuite
/site.exp
: site.exp
2812 if
[ -d testsuite
]; then \
2817 rm -rf testsuite
/site.exp
2818 cp site.exp testsuite
/site.exp
2820 check-g
++: testsuite
/site.exp
2821 -rootme
=`pwd`; export rootme
; \
2822 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2824 EXPECT
=${EXPECT} ; export EXPECT
; \
2825 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2826 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2827 export TCL_LIBRARY
; fi
; \
2828 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2830 check-gcc
: testsuite
/site.exp
2831 -rootme
=`pwd`; export rootme
; \
2832 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2834 EXPECT
=${EXPECT} ; export EXPECT
; \
2835 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2836 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2837 export TCL_LIBRARY
; fi
; \
2838 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2840 check-g77
: testsuite
/site.exp
2841 -rootme
=`pwd`; export rootme
; \
2842 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2844 EXPECT
=${EXPECT} ; export EXPECT
; \
2845 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2846 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2847 export TCL_LIBRARY
; fi
; \
2848 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2850 check-objc
: testsuite
/site.exp
2851 -rootme
=`pwd`; export rootme
; \
2852 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2854 EXPECT
=${EXPECT} ; export EXPECT
; \
2855 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2856 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2857 export TCL_LIBRARY
; fi
; \
2858 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2860 # These exist for maintenance purposes.
2862 # Update the tags table.
2866 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2867 etags
*.y
*.h
*.c
; \
2871 # Create the distribution tar.gz file.
2873 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2874 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2876 tmp-gcc.xtar
: distdir
2877 # Make the distribution.
2878 tar -chf tmp-gcc.xtar gcc-
$(version
)
2881 if
[ -d
$(srcdir)/CVS
]; then cd
$(srcdir) && cvs
-r update
; fi
2883 # This target exists to do the initial work before the language specific
2885 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2886 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2887 $(srcdir)/version.c TAGS
2888 @case
'$(USE_NLS)' in \
2890 *) echo
"configure with --enable-nls before making a distribution"; \
2893 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2895 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2897 # Update the version number in README
2898 $(AWK
) '$$1 " " $$2 " " $$3 == "This directory contains" \
2899 { $$6 = version; print $$0 } \
2900 $$1 " " $$2 " " $$3 != "This directory contains"' \
2901 version
=$(version
) $(srcdir)/README
> tmp.README
2902 mv tmp.README README
2903 -rm -rf gcc-
$(version
) tmp
2904 # Put all the files in a temporary subdirectory
2905 # which has the name that we want to have in the tar file.
2912 for file in
`(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
2913 test -f
$(srcdir)/$$file && $(LN_S
) $(srcdir)/$$file tmp
; \
2915 if
test "$(srcdir)" != "." ; then \
2916 for file in c-parse.c cexp.c
; do \
2917 test -f .
/$$file && $(LN_S
) ..
/$$file tmp
; \
2920 for file in
`(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
2921 if
test -d
$(srcdir)/config
/$$file \
2922 && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2923 mkdir tmp
/config
/$$file; \
2924 for subfile in
`(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
2925 $(LN_S
) $(srcdir)/config
/$$file/$$subfile tmp
/config
/$$file; \
2928 $(LN_S
) $(srcdir)/config
/$$file tmp
/config
; \
2931 for file in
`(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
2932 $(LN_S
) $(srcdir)/ginclude
/$$file tmp
/ginclude
; \
2934 for file in
`(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
2935 $(LN_S
) $(srcdir)/objc
/$$file tmp
/objc
; \
2937 $(LN_S
) .gdbinit tmp
2939 # Finish making `distdir', after the languages have done their thing.
2941 mv tmp gcc-
$(version
)
2942 # Get rid of everything we don't want in the distribution. We'd want
2943 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2945 cd gcc-
$(version
); make extraclean distdir-check VERSION_DEP
=
2948 ($(AWK
) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' |
sort) \
2949 < po
/POTFILES.in
> tmp.POTFILES
2950 ls
[A-Za-z
]*.
[ch
] [a-z
]*/[A-Za-z
]*.
[ch
] \
2951 [a-z
]*/[a-z
]*/[A-Za-z
]*.
[ch
] |
sort > tmp.src
2952 diff tmp.POTFILES tmp.src ||
{ \
2953 echo
"po/POTFILES.in and sources do not match -- please fix"; \
2958 distdir
: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
2959 lang.distdir distdir-finish
2961 # make diff oldversion=M.N
2962 # creates a diff file between an older distribution and this one.
2963 # The -P option assumes this is GNU diff.
2965 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2966 -x cexp.c
-x
-x TAGS
-x INSTALL \
2967 -x configure
-x config.in \
2968 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2969 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2970 $(LANG_DIFF_EXCLUDES
) \
2971 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2973 # A list of files to be destroyed during "lean" builds.
2974 VOL_FILES
=`echo $(OBJS) $(C_OBJS) $(LIBCPP_OBJS) *.c *.h gen*`
2976 bootstrap bootstrap-lean
: force
2977 # Only build the C compiler for stage1, because that is the only one that
2978 # we can guarantee will build with the native compiler, and also it is the
2979 # only thing useful for building stage2.
2980 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2982 -if
test $@
= bootstrap-lean
; then cd stage1
; rm -f
$(VOL_FILES
); else true
; fi
2983 # This used to define ALLOCA as empty, but that would lead to bad results
2984 # for a subsequent `make install' since that would not have ALLOCA empty.
2985 # To prevent `make install' from compiling alloca.o and then relinking cc1
2986 # because alloca.o is newer, we permit these recursive makes to compile
2987 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2988 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2990 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; cd stage2
; rm -f
$(VOL_FILES
); else true
; fi
2991 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2993 bootstrap2 bootstrap2-lean
: force
2994 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2996 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; cd stage2
; rm -f
$(VOL_FILES
); else true
; fi
2997 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2999 bootstrap3 bootstrap3-lean
: force
3000 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
3002 bootstrap4 bootstrap4-lean
: force
3003 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
3005 # Compare the object files in the current directory with those in the
3008 # ./ avoids bug in some versions of tail.
3009 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
3011 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3012 for file in
*$(objext
); do \
3013 tail
+16c .
/$$file > tmp-foo1
; \
3014 tail
+16c stage
$$stage/$$file > tmp-foo2 \
3015 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3017 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3018 for
dir in tmp-foo intl
$(SUBDIRS
); do \
3019 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
3020 for file in
$$dir/*$(objext
); do \
3021 tail
+16c .
/$$file > tmp-foo1
; \
3022 tail
+16c stage
$$stage/$$file > tmp-foo2 \
3023 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3028 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3029 if
[ -f .bad_compare
]; then \
3030 echo
"Bootstrap comparison failure!"; \
3035 *-lean
) rm -rf stage
$$stage ;; \
3040 # Compare the object files in the current directory with those in the
3041 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
3042 # running tail and the overhead of twice copying each object file.
3044 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
3046 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3047 for file in
*$(objext
); do \
3048 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3050 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3051 for
dir in tmp-foo intl
$(SUBDIRS
); do \
3052 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
3053 for file in
$$dir/*$(objext
); do \
3054 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3058 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3059 if
[ -f .bad_compare
]; then \
3060 echo
"Bootstrap comparison failure!"; \
3065 *-lean
) rm -rf stage
$$stage ;; \
3069 # Copy the object files from a particular stage into a subdirectory.
3071 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
3072 -for
dir in intl
$(SUBDIRS
) ; \
3074 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
3076 -mv
$(STAGESTUFF
) stage1
3077 -mv intl
/*$(objext
) stage1
/intl
3078 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3079 # dir will work properly.
3080 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
3081 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
3082 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
3083 -rm -f stage1
/libgcc.a
3085 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3086 $(RANLIB_FOR_TARGET
) stage1
/libgcc.a
; \
3088 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3089 cp stage1
/$${f} .
; \
3092 stage1
: force stage1-start lang.stage1
3095 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
3096 -for
dir in intl
$(SUBDIRS
) ; \
3098 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
3100 -mv
$(STAGESTUFF
) stage2
3101 -mv intl
/*$(objext
) stage2
/intl
3102 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3103 # dir will work properly.
3104 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
3105 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
3106 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
3107 -rm -f stage2
/libgcc.a
3109 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3110 $(RANLIB_FOR_TARGET
) stage2
/libgcc.a
; \
3112 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3113 cp stage2
/$${f} .
; \
3116 stage2
: force stage2-start lang.stage2
3119 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
3120 -for
dir in intl
$(SUBDIRS
) ; \
3122 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
3124 -mv
$(STAGESTUFF
) stage3
3125 -mv intl
/*$(objext
) stage3
/intl
3126 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3127 # dir will work properly.
3128 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
3129 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
3130 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
3131 -rm -f stage3
/libgcc.a
3133 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3134 $(RANLIB_FOR_TARGET
) stage3
/libgcc.a
; \
3136 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3137 cp stage3
/$${f} .
; \
3140 stage3
: force stage3-start lang.stage3
3143 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
3144 -for
dir in intl
$(SUBDIRS
) ; \
3146 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
3148 -mv
$(STAGESTUFF
) stage4
3149 -mv intl
/*$(objext
) stage4
/intl
3150 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3151 # dir will work properly.
3152 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
3153 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
3154 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
3155 -rm -f stage4
/libgcc.a
3157 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3158 $(RANLIB_FOR_TARGET
) stage4
/libgcc.a
; \
3160 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3161 cp stage4
/$${f} .
; \
3164 stage4
: force stage4-start lang.stage4
3166 # Copy just the executable files from a particular stage into a subdirectory,
3167 # and delete the object files. Use this if you're just verifying a version
3168 # that is pretty sure to work, and you are short of disk space.
3169 risky-stage1
: stage1
3172 risky-stage2
: stage2
3175 risky-stage3
: stage3
3178 risky-stage4
: stage4
3181 #In GNU Make, ignore whether `stage*' exists.
3182 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
3183 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3188 # The enquire rules are still useful for building new float-anything.h.
3189 # Special flags for compiling enquire.
3190 # We disable optimization to make floating point more reliable.
3191 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
3192 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
3194 # Enquire target (This is a variable so that a target can choose not to
3198 # Test to see whether <float.h> exists in the system header files,
3199 # and is not derived from GCC.
3201 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
3202 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
3205 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
3206 # to ensure, we're emitting a full blown <float.h> ourselves.
3207 FLOAT_H_TEST
= false
3209 # Used to compile enquire with standard cc, but have forgotten why.
3210 # Let's try with GCC.
3211 enquire
: enquire.o
$(GCC_PARTS
)
3212 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
3213 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
3214 if
$(FLOAT_H_TEST
); then \
3215 rm -f
include/float.h
; \
3216 SYS_FLOAT_H_WRAP
=1; \
3218 SYS_FLOAT_H_WRAP
=0; \
3220 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
3221 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
3222 -I.
-c
$(srcdir)/enquire.c
3224 # Create float.h source for the native machine.
3225 # Make it empty if we can use the system float.h without changes.
3226 float.h-nat
: enquire
3227 -.
/enquire
-f
> tmp-float.h
3228 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3229 mv tmp-float.h float.h-nat
3231 # Create a dummy float.h source for a cross-compiler.
3232 # ??? This isn't used anymore. Should we create config/float-unkn.h
3233 # and make that the default float_format in configure?
3235 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3236 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3237 echo
"#endif" >> t-float.h-cross
3238 mv t-float.h-cross float.h-cross