1 # SPDX-License-Identifier: GPL-3.0-or-later
2 # GCC target-specific configuration file.
3 # Copyright (C) 1997-2024 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # default_gnu_indirect_function
49 # The default value for the $enable_gnu_indirect_function
50 # variable. enable_gnu_indirect_function relies
51 # upon the presence of a non-standard gnu ifunc support
52 # in the assembler, linker and dynamic linker.
53 # Since not all libraries provide the dynamic linking
54 # support, the default value of
55 # $default_gnu_indirect_function is set to
56 # "no" except for targets which are known to be OK.
58 # gas_flag Either yes or no depending on whether GNU as was
61 # gnu_ld_flag Either yes or no depending on whether GNU ld was
64 # This file sets the following shell variables for use by the
65 # autoconf-generated configure script:
67 # cpu_type The name of the cpu, if different from the first
68 # chunk of the canonical target name.
70 # tm_defines List of target macros to define for all compilations.
72 # tm_file A list of target macro files, if different from
73 # "$cpu_type/$cpu_type.h". Usually it's constructed
74 # per target in a way like this:
75 # tm_file="${tm_file} elfos.h ${cpu_type.h}/elf.h"
76 # Note that the preferred order is:
77 # - specific target header "${cpu_type}/${cpu_type.h}"
78 # - generic headers like elfos.h, etc.
79 # - specializing target headers like ${cpu_type.h}/elf.h
80 # This helps to keep OS specific stuff out of the CPU
81 # defining header ${cpu_type}/${cpu_type.h}.
83 # It is possible to include automatically-generated
84 # build-directory files by prefixing them with "./".
85 # All other files should relative to $srcdir/config.
87 # tm_p_file Location of file with declarations for functions
90 # tm_d_file A list of headers with definitions of target hook
91 # macros for the D compiler.
93 # tm_rust_file list of headers with definitions of target hook
94 # macros for the Rust compiler.
96 # out_file The name of the machine description C support
97 # file, if different from "$cpu_type/$cpu_type.c".
99 # common_out_file The name of the source file for code shared between
100 # the compiler proper and the driver.
102 # md_file The name of the machine-description file, if
103 # different from "$cpu_type/$cpu_type.md".
105 # tmake_file A list of machine-description-specific
106 # makefile-fragments, if different from
107 # "$cpu_type/t-$cpu_type".
109 # extra_modes The name of the file containing a list of extra
110 # machine modes, if necessary and different from
111 # "$cpu_type/$cpu_type-modes.def".
113 # extra_objs List of extra objects that should be linked into
114 # the compiler proper (cc1, cc1obj, cc1plus)
115 # depending on target.
117 # extra_gcc_objs List of extra objects that should be linked into
118 # the compiler driver (gcc) depending on target.
120 # extra_headers List of used header files from the directory
121 # config/${cpu_type}.
123 # user_headers_inc_next_pre
124 # List of header file names of internal gcc header
125 # files, which should be prefixed by an include_next.
126 # user_headers_inc_next_post
127 # List of header file names of internal gcc header
128 # files, which should be postfixed by an include_next.
129 # use_gcc_tgmath If set, add tgmath.h to the list of used header
132 # use_gcc_stdint If "wrap", install a version of stdint.h that
133 # wraps the system's copy for hosted compilations;
134 # if "provide", provide a version of systems without
135 # such a system header; otherwise "none", do not
136 # provide such a header at all.
138 # extra_programs List of extra executables compiled for this target
139 # machine, used when linking.
141 # extra_options List of target-dependent .opt files.
143 # c_target_objs List of extra target-dependent objects that be
144 # linked into the C compiler only.
146 # cxx_target_objs List of extra target-dependent objects that be
147 # linked into the C++ compiler only.
149 # d_target_objs List of extra target-dependent objects that be
150 # linked into the D compiler only.
152 # fortran_target_objs List of extra target-dependent objects that be
153 # linked into the fortran compiler only.
155 # rust_target_objs List of extra target-dependent objects that be
156 # linked into the Rust compiler only.
158 # target_gtfiles List of extra source files with type information.
160 # xm_defines List of macros to define when compiling for the
163 # xm_file List of files to include when compiling for the
166 # use_collect2 Set to yes or no, depending on whether collect2
169 # target_cpu_default Set to override the default target model.
171 # gdb_needs_out_file_path
172 # Set to yes if gdb needs a dir command with
173 # `dirname $out_file`.
175 # thread_file Set to control which thread package to use.
177 # gas Set to yes or no depending on whether the target
178 # system normally uses GNU as.
180 # configure_default_options
181 # Set to an initializer for configure_default_options
182 # in configargs.h, based on --with-cpu et cetera.
184 # native_system_header_dir
185 # Where system header files are found for this
186 # target. This defaults to /usr/include. If
187 # the --with-sysroot configure option or the
188 # --sysroot command line option is used this
189 # will be relative to the sysroot.
190 # target_type_format_char
191 # The default character to be used for formatting
193 # .type symbol_name, ${t_t_f_c}<property>
196 # The following variables are used in each case-construct to build up the
197 # outgoing variables:
199 # gnu_ld Set to yes or no depending on whether the target
200 # system normally uses GNU ld.
202 # target_has_targetcm Set to yes or no depending on whether the target
203 # has its own definition of targetcm.
205 # target_has_targetm_common Set to yes or no depending on whether the
206 # target has its own definition of targetm_common.
208 # target_has_targetdm Set to yes or no depending on whether the target
209 # has its own definition of targetdm.
211 # target_has_targetrustm Set to yes or no depending on whether the target
212 # has its own definition of targetrustm.
218 user_headers_inc_next_pre=
219 user_headers_inc_next_post=
231 target_has_targetcm=no
232 target_has_targetm_common=yes
233 target_has_targetdm=no
234 target_has_targetrustm=no
237 # Set this to force installation and use of collect2.
239 # Set this to override the default target model.
241 # Set this if gdb needs a dir command with `dirname $out_file`
242 gdb_needs_out_file_path=
243 # Set this to control which thread package will be used.
245 # Reinitialize these from the flag values every loop pass, since some
246 # configure entries modify them.
248 gnu_ld="$gnu_ld_flag"
249 default_use_cxa_atexit=no
250 default_gnu_indirect_function=no
253 native_system_header_dir=/usr/include
254 target_type_format_char='@'
256 # Don't carry these over build->host->target. Please.
260 # Determine Solaris minor version
261 case ${target}:`uname -v` in
262 # Only do this on Solaris. Illumos uses illumos-* instead.
263 *-*-solaris2.11*:11.*)
264 # Restrict to native configurations.
265 if test x$host = x$target; then
266 uname_version="`uname -v`"
267 # Prepend dot as needed below.
268 target_min=".`expr "$uname_version" : '11\.\([0-9]*\)'`"
273 # Obsolete configurations.
274 case ${target}${target_min} in
275 *-*-solaris2.11.[0-3]* \
278 if test "x$enable_obsolete" != xyes; then
279 echo "*** Configuration ${target}${target_min} is obsolete." >&2
280 echo "*** Specify --enable-obsolete to build it anyway." >&2
281 echo "*** Support will be REMOVED in the next major release of GCC," >&2
282 echo "*** unless a maintainer comes forward." >&2
287 # Unsupported targets list. Do not put an entry in this list unless
288 # it would otherwise be caught by a more permissive pattern. The list
289 # should be in alphabetical order.
291 # Avoid special cases that are not obsolete
302 | i[34567]86-go32-* \
303 | i[34567]86-*-go32* \
307 | m68k-*-uclinuxoldabi* \
308 | mips64orion*-*-rtems* \
310 | powerpc*-*-linux*paired* \
312 | sparc-hal-solaris2* \
315 | *-*-freebsd[12] | *-*-freebsd[1234].* \
316 | *-*-freebsd*aout* \
324 | *-*-solaris2.[0-9] \
325 | *-*-solaris2.[0-9].* \
330 echo "*** Configuration ${target} not supported" 1>&2
335 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
336 # updated in each machine entry. Also set default extra_headers for some
339 cpu_type=`echo ${target} | sed 's/-.*$//'`
344 tmake_file=m32c/t-m32c
345 target_has_targetm_common=no
349 extra_headers="arm_fp16.h arm_neon.h arm_bf16.h arm_acle.h arm_sve.h arm_sme.h arm_neon_sve_bridge.h"
350 c_target_objs="aarch64-c.o"
351 cxx_target_objs="aarch64-c.o"
352 d_target_objs="aarch64-d.o"
353 extra_objs="aarch64-builtins.o aarch-common.o aarch64-sve-builtins.o aarch64-sve-builtins-shapes.o aarch64-sve-builtins-base.o aarch64-sve-builtins-sve2.o aarch64-sve-builtins-sme.o cortex-a57-fma-steering.o aarch64-speculation.o falkor-tag-collision-avoidance.o aarch-bti-insert.o aarch64-cc-fusion.o aarch64-early-ra.o aarch64-ldp-fusion.o"
354 target_gtfiles="\$(srcdir)/config/aarch64/aarch64-builtins.h \$(srcdir)/config/aarch64/aarch64-builtins.cc \$(srcdir)/config/aarch64/aarch64-sve-builtins.h \$(srcdir)/config/aarch64/aarch64-sve-builtins.cc"
355 target_has_targetm_common=yes
359 extra_options="${extra_options} g.opt"
370 c_target_objs="arc-c.o"
371 cxx_target_objs="arc-c.o"
372 extra_options="${extra_options} arc/arc-tables.opt g.opt"
373 extra_headers="arc-simd.h"
377 extra_objs="arm-builtins.o arm-mve-builtins.o arm-mve-builtins-shapes.o arm-mve-builtins-base.o aarch-common.o aarch-bti-insert.o"
378 extra_headers="mmintrin.h arm_neon.h arm_acle.h arm_fp16.h arm_cmse.h arm_bf16.h arm_mve_types.h arm_mve.h arm_cde.h"
379 target_type_format_char='%'
380 c_target_objs="arm-c.o"
381 cxx_target_objs="arm-c.o"
382 d_target_objs="arm-d.o"
383 extra_options="${extra_options} arm/arm-tables.opt"
384 target_gtfiles="\$(srcdir)/config/arm/arm-builtins.cc \$(srcdir)/config/arm/arm-mve-builtins.h \$(srcdir)/config/arm/arm-mve-builtins.cc"
388 c_target_objs="avr-c.o"
389 cxx_target_objs="avr-c.o"
398 extra_options="${extra_options} g.opt"
401 target_has_targetm_common=no
403 moxie*) cpu_type=moxie
404 target_has_targetm_common=no
408 extra_headers=math-68881.h
409 extra_options="${extra_options} m68k/m68k-tables.opt"
411 i[34567]86-*-* | x86_64-*-*)
413 c_target_objs="i386-c.o"
414 cxx_target_objs="i386-c.o"
415 d_target_objs="i386-d.o"
416 extra_objs="x86-tune-sched.o x86-tune-sched-bd.o x86-tune-sched-atom.o x86-tune-sched-core.o i386-options.o i386-builtins.o i386-expand.o i386-features.o"
417 target_gtfiles="\$(srcdir)/config/i386/i386-builtins.cc \$(srcdir)/config/i386/i386-expand.cc \$(srcdir)/config/i386/i386-options.cc"
418 extra_options="${extra_options} fused-madd.opt"
419 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
420 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
421 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
422 immintrin.h x86intrin.h avxintrin.h xopintrin.h
423 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
424 lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h
425 avx2intrin.h avx512fintrin.h fmaintrin.h f16cintrin.h
426 rtmintrin.h xtestintrin.h rdseedintrin.h prfchwintrin.h
427 adxintrin.h fxsrintrin.h xsaveintrin.h xsaveoptintrin.h
428 avx512cdintrin.h avx512erintrin.h avx512pfintrin.h
429 shaintrin.h clflushoptintrin.h xsavecintrin.h
430 xsavesintrin.h avx512dqintrin.h avx512bwintrin.h
431 avx512vlintrin.h avx512vlbwintrin.h avx512vldqintrin.h
432 avx512ifmaintrin.h avx512ifmavlintrin.h avx512vbmiintrin.h
433 avx512vbmivlintrin.h avx5124fmapsintrin.h avx5124vnniwintrin.h
434 avx512vpopcntdqintrin.h clwbintrin.h mwaitxintrin.h
435 clzerointrin.h pkuintrin.h sgxintrin.h cetintrin.h
436 gfniintrin.h cet.h avx512vbmi2intrin.h
437 avx512vbmi2vlintrin.h avx512vnniintrin.h
438 avx512vnnivlintrin.h vaesintrin.h vpclmulqdqintrin.h
439 avx512vpopcntdqvlintrin.h avx512bitalgintrin.h
440 avx512bitalgvlintrin.h pconfigintrin.h wbnoinvdintrin.h
441 movdirintrin.h waitpkgintrin.h cldemoteintrin.h
442 avx512bf16vlintrin.h avx512bf16intrin.h enqcmdintrin.h
443 serializeintrin.h avx512vp2intersectintrin.h
444 avx512vp2intersectvlintrin.h tsxldtrkintrin.h
445 amxtileintrin.h amxint8intrin.h amxbf16intrin.h
446 x86gprintrin.h uintrintrin.h hresetintrin.h
447 keylockerintrin.h avxvnniintrin.h mwaitintrin.h
448 avx512fp16intrin.h avx512fp16vlintrin.h avxifmaintrin.h
449 avxvnniint8intrin.h avxneconvertintrin.h
450 cmpccxaddintrin.h amxfp16intrin.h prfchiintrin.h
451 raointintrin.h amxcomplexintrin.h avxvnniint16intrin.h
452 sm3intrin.h sha512intrin.h sm4intrin.h
456 extra_headers=ia64intrin.h
457 extra_options="${extra_options} g.opt fused-madd.opt"
463 extra_options="${extra_options} g.opt"
467 extra_options="${extra_options} g.opt"
470 extra_headers=math-68881.h
471 extra_options="${extra_options} m68k/m68k-tables.opt"
475 extra_options="${extra_options} g.opt"
479 d_target_objs="mips-d.o"
480 extra_headers="loongson.h loongson-mmiintrin.h msa.h"
481 extra_objs="frame-header-opt.o"
482 extra_options="${extra_options} g.opt fused-madd.opt mips/mips-tables.opt"
486 d_target_objs="loongarch-d.o"
487 extra_headers="larchintrin.h lsxintrin.h lasxintrin.h"
488 extra_objs="loongarch-c.o loongarch-builtins.o loongarch-cpu.o loongarch-opts.o loongarch-def.o"
489 extra_gcc_objs="loongarch-driver.o loongarch-cpu.o loongarch-opts.o loongarch-def.o"
490 extra_options="${extra_options} g.opt fused-madd.opt"
494 extra_headers="nds32_intrinsic.h nds32_isr.h nds32_init.inc"
497 extra_options="${extra_options} nds32/nds32-linux.opt"
500 extra_options="${extra_options} nds32/nds32-elf.opt"
505 extra_objs="nds32-cost.o nds32-intrinsic.o nds32-isr.o nds32-md-auxiliary.o nds32-pipelines-auxiliary.o nds32-predicates.o nds32-memory-manipulation.o nds32-fp-as-gp.o nds32-relax-opt.o nds32-utils.o"
509 extra_options="${extra_options} g.opt"
513 c_target_objs="nvptx-c.o"
514 cxx_target_objs="nvptx-c.o"
515 extra_options="${extra_options} nvptx/nvptx-gen.opt"
522 extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
523 extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
524 extra_objs="${extra_objs} rs6000-builtins.o rs6000-builtin.o"
525 extra_headers="ppc-asm.h altivec.h htmintrin.h htmxlintrin.h"
526 extra_headers="${extra_headers} bmi2intrin.h bmiintrin.h"
527 extra_headers="${extra_headers} xmmintrin.h mm_malloc.h emmintrin.h"
528 extra_headers="${extra_headers} mmintrin.h x86intrin.h"
529 extra_headers="${extra_headers} pmmintrin.h tmmintrin.h smmintrin.h"
530 extra_headers="${extra_headers} nmmintrin.h immintrin.h x86gprintrin.h"
531 extra_headers="${extra_headers} ppu_intrinsics.h spu2vmx.h vec_types.h si2vmx.h"
532 extra_headers="${extra_headers} amo.h"
534 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456789]|xpower10|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|xe6500)
538 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
539 target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.cc \$(srcdir)/config/rs6000/rs6000-call.cc"
540 target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.cc"
541 target_gtfiles="$target_gtfiles ./rs6000-builtins.h"
548 extra_objs="riscv-builtins.o riscv-c.o riscv-sr.o riscv-shorten-memrefs.o riscv-selftests.o riscv-string.o"
549 extra_objs="${extra_objs} riscv-v.o riscv-vsetvl.o riscv-vector-costs.o riscv-avlprop.o"
550 extra_objs="${extra_objs} riscv-vector-builtins.o riscv-vector-builtins-shapes.o riscv-vector-builtins-bases.o"
551 extra_objs="${extra_objs} thead.o riscv-target-attr.o"
552 d_target_objs="riscv-d.o"
553 extra_headers="riscv_vector.h riscv_crypto.h riscv_bitmanip.h riscv_th_vector.h"
554 target_gtfiles="$target_gtfiles \$(srcdir)/config/riscv/riscv-vector-builtins.cc"
555 target_gtfiles="$target_gtfiles \$(srcdir)/config/riscv/riscv-vector-builtins.h"
558 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
559 extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
560 extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
561 target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.cc \$(srcdir)/config/rs6000/rs6000-call.cc"
562 target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.cc"
566 c_target_objs="sparc-c.o"
567 cxx_target_objs="sparc-c.o"
568 d_target_objs="sparc-d.o"
569 extra_headers="visintrin.h"
573 d_target_objs="s390-d.o"
574 extra_options="${extra_options} fused-madd.opt"
575 extra_headers="s390intrin.h htmintrin.h htmxlintrin.h vecintrin.h"
576 target_gtfiles="./s390-gen-builtins.h"
578 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
579 sh[123456789lbe]*-*-* | sh-*-*)
581 extra_options="${extra_options} fused-madd.opt"
582 extra_objs="${extra_objs} sh_treg_combine.o sh-mem.o sh_optimize_sett_clrt.o"
589 extra_headers="c6x_intrinsics.h"
590 extra_options="${extra_options} c6x/c6x-tables.opt"
593 extra_options="${extra_options} fused-madd.opt"
594 extra_objs="xtensa-dynconfig.o"
598 tm_file=${cpu_type}/${cpu_type}.h
599 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
601 tm_p_file=${cpu_type}/${cpu_type}-protos.h
605 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-d.h
607 tm_d_file="${tm_d_file} ${cpu_type}/${cpu_type}-d.h"
611 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-rust.h
613 tm_rust_file="${cpu_type}/${cpu_type}-rust.h"
615 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-rust.cc
617 rust_target_objs="${rust_target_objs} ${cpu_type}-rust.o"
621 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
623 extra_modes=${cpu_type}/${cpu_type}-modes.def
625 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
627 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
632 tm_p_file="${tm_p_file} arm/aarch-common-protos.h"
635 if test "x$with_multilib_list" = xilp32; then
636 tm_file="aarch64/biarchilp32.h ${tm_file}"
638 tm_file="aarch64/biarchlp64.h ${tm_file}"
642 tm_file="aarch64/biarchilp32.h ${tm_file}"
645 tm_file="aarch64/biarchlp64.h ${tm_file}"
648 echo "Unknown ABI used in --with-abi=$with_abi"
653 if test "x$with_abi" != x; then
654 echo "This target does not support --with-abi."
663 if test "x$with_multilib_list" = xmx32; then
664 tm_file="i386/biarchx32.h ${tm_file}"
666 tm_file="i386/biarch64.h ${tm_file}"
670 tm_file="i386/biarch64.h ${tm_file}"
673 tm_file="i386/biarchx32.h ${tm_file}"
676 echo "Unknown ABI used in --with-abi=$with_abi"
681 tm_p_file="arm/arm-flags.h ${tm_p_file} arm/aarch-common-protos.h"
685 # On a.out targets, we need to use collect2.
692 # Common C libraries.
693 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4"
695 # 32-bit x86 processors supported by --with-arch=. Each processor
696 # MUST be separated by exactly one space.
697 x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \
698 athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \
699 i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \
700 pentium4 pentium4m pentiumpro prescott lakemont samuel-2 nehemiah \
703 # 64-bit x86 processors supported by --with-arch=. Each processor
704 # MUST be separated by exactly one space.
705 x86_64_archs="amdfam10 athlon64 athlon64-sse3 barcelona bdver1 bdver2 \
706 bdver3 bdver4 znver1 znver2 znver3 znver4 btver1 btver2 k8 k8-sse3 opteron \
707 opteron-sse3 nocona core2 corei7 corei7-avx core-avx-i core-avx2 atom \
708 slm nehalem westmere sandybridge ivybridge haswell broadwell bonnell \
709 silvermont knl knm skylake-avx512 cannonlake icelake-client icelake-server \
710 skylake goldmont goldmont-plus tremont cascadelake tigerlake cooperlake \
711 sapphirerapids alderlake rocketlake eden-x2 nano nano-1000 nano-2000 nano-3000 \
712 nano-x2 eden-x4 nano-x4 lujiazui yongfeng x86-64 x86-64-v2 x86-64-v3 x86-64-v4 \
713 sierraforest graniterapids graniterapids-d grandridge arrowlake arrowlake-s \
714 clearwaterforest pantherlake native"
716 # Additional x86 processors supported by --with-cpu=. Each processor
717 # MUST be separated by exactly one space.
718 x86_cpus="generic intel"
720 # Common parts for widely ported systems.
723 tmake_file="t-darwin "
724 tm_file="${tm_file} darwin.h"
725 darwin_os=`echo ${target} | sed 's/.*darwin\([0-9.]*\).*$/\1/'`
726 darwin_maj=`expr "$darwin_os" : '\([0-9]*\).*'`
727 macos_min=`expr "$darwin_os" : '[0-9]*\.\([0-9]*\).*'`
729 if test x"${macos_min}" = x; then
733 # Tools hosted on earlier versions of Darwin constrained all object
734 # alignment to be 2^15 or smaller. From Darwin11 (macOS 10.7) the
735 # alignment of non-common is allowed to be up to 2^28. Note that the
736 #Â larger alignment is permitted when targeting 10.6 from 10.7 so that
737 #Â the constraint only need be applied per host (and only if the host
740 *-*-darwin[4-9]* | *-*-darwin10*)
741 tm_defines="$tm_defines L2_MAX_OFILE_ALIGNMENT=15U"
744 tm_defines="$tm_defines L2_MAX_OFILE_ALIGNMENT=28U"
748 # Darwin 4 to 19 correspond to macOS 10.0 to 10.15
749 *-*-darwin[4-9]* | *-*-darwin1[0-9]*)
750 macos_min=`expr $darwin_maj - 4`
753 # Darwin 20 corresponds to macOS 11, Darwin 21 to macOS 12.
754 macos_maj=`expr $darwin_maj - 9`
759 aarch64) macos_maj=11 ;;
760 x86_64) macos_min=6 ;;
764 *-*-darwin*) tm_defines="$tm_defines DARWIN_USE_KERNEL_VERS" ;;
766 # If configuring a cross-compiler then we will have set some
767 #Â default above, but it is probably not what was intended.
768 echo "Warning: Using ${target} is only suitable for Darwin hosts" 1>&2
769 echo "configure with an explicit target version" 1>&2
774 echo "Error: configuring for an unreleased macOS version ${target}" 1>&2
778 tm_defines="$tm_defines DEF_MIN_OSX_VERSION=\\\"${macos_maj}.${macos_min}\\\""
779 tm_defines="$tm_defines DEF_LD64=\\\"${def_ld64}\\\""
780 tm_file="${tm_file} ${cpu_type}/darwin.h"
781 tm_p_file="${tm_p_file} darwin-protos.h"
782 target_gtfiles="$target_gtfiles \$(srcdir)/config/darwin.cc"
783 extra_options="${extra_options} rpath.opt darwin.opt"
784 c_target_objs="${c_target_objs} darwin-c.o"
785 cxx_target_objs="${cxx_target_objs} darwin-c.o"
786 d_target_objs="${d_target_objs} darwin-d.o"
787 fortran_target_objs="darwin-f.o"
788 rust_target_objs="${rust_target_objs} darwin-rust.o"
789 target_has_targetcm=yes
790 target_has_targetdm=yes
791 target_has_targetrustm=yes
792 extra_objs="${extra_objs} darwin.o"
793 extra_gcc_objs="darwin-driver.o"
794 default_use_cxa_atexit=yes
796 case ${enable_threads} in
797 "" | yes | posix) thread_file='posix' ;;
803 tmake_file="t-slibgcc"
804 case ${enable_threads} in
809 # Let these non-posix thread selections fall through if requested
812 echo 'Unknown thread configuration for DragonFly BSD'
816 extra_options="$extra_options rpath.opt dragonfly.opt"
817 default_use_cxa_atexit=yes
819 d_target_objs="${d_target_objs} dragonfly-d.o"
820 tmake_file="${tmake_file} t-dragonfly"
821 target_has_targetdm=yes
822 rust_target_objs="${rust_target_objs} dragonfly-rust.o"
823 target_has_targetrustm=yes
826 # This is the generic ELF configuration of FreeBSD. Later
827 # machine-specific sections may refine and add to this
830 # Due to tm_file entry ordering issues that vary between cpu
831 # architectures, we only define fbsd_tm_file to allow the
832 # machine-specific section to dictate the final order of all
833 # entries of tm_file with the minor exception that components
834 # of the tm_file set here will always be of the form:
836 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
838 # The machine-specific section should not tamper with this
839 # ordering but may order all other entries of tm_file as it
840 # pleases around the provided core setting.
843 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
844 if test "$fbsd_major" = ""; then
845 echo "Specify the major version number of the targeted FreeBSD release"
846 echo "like this: --target=amd64-unknown-freebsd10.1"
849 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
850 tmake_file="t-slibgcc"
851 case ${enable_threads} in
853 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
859 echo 'Unknown thread configuration for FreeBSD'
863 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
864 extra_options="$extra_options rpath.opt freebsd.opt"
869 default_use_cxa_atexit=yes;;
872 d_target_objs="${d_target_objs} freebsd-d.o"
873 tmake_file="${tmake_file} t-freebsd"
874 target_has_targetdm=yes
875 rust_target_objs="${rust_target_objs} freebsd-rust.o"
876 target_has_targetrustm=yes
879 native_system_header_dir=/include
880 tmake_file="t-fuchsia"
881 rust_target_objs="${rust_target_objs} fuchsia-rust.o"
882 target_has_targetrustm=yes
884 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu | *-*-uclinuxfdpiceabi)
885 extra_options="$extra_options gnu-user.opt"
888 case ${enable_threads} in
889 "" | yes | posix) thread_file='posix' ;;
891 tmake_file="t-slibgcc"
893 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu)
896 native_system_header_dir=/include
899 # Linux C libraries selection switch: glibc / uclibc / bionic.
900 # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
903 tm_p_file="${tm_p_file} linux-protos.h"
904 tmake_file="${tmake_file} t-linux"
905 extra_objs="${extra_objs} linux.o"
906 extra_options="${extra_options} linux.opt"
911 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
913 *-*-*uclibc* | *-*-uclinuxfdpiceabi)
914 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
917 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL"
920 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
923 # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
925 default_use_cxa_atexit=yes
928 # Enable compilation for Android by default for *android* targets.
931 tm_defines="$tm_defines ANDROID_DEFAULT=1"
934 tm_defines="$tm_defines ANDROID_DEFAULT=0"
937 c_target_objs="${c_target_objs} glibc-c.o"
938 cxx_target_objs="${cxx_target_objs} glibc-c.o"
939 tmake_file="${tmake_file} t-glibc"
940 target_has_targetcm=yes
942 *-*-*uclibc* | *-*-uclinuxfdpiceabi)
945 # Linux targets always support .init_array.
946 gcc_cv_initfini_array=yes
951 d_target_objs="${d_target_objs} linux-d.o"
952 target_has_targetdm=yes
953 rust_target_objs="${rust_target_objs} linux-rust.o"
954 target_has_targetrustm=yes
957 d_target_objs="${d_target_objs} kfreebsd-d.o"
958 target_has_targetdm=yes
960 *-*-kopensolaris*-gnu)
961 d_target_objs="${d_target_objs} kopensolaris-d.o"
962 target_has_targetdm=yes
965 d_target_objs="${d_target_objs} gnu-d.o"
966 target_has_targetdm=yes
971 tm_p_file="${tm_p_file} netbsd-protos.h"
972 tmake_file="t-netbsd t-slibgcc"
973 extra_objs="${extra_objs} netbsd.o"
974 d_target_objs="${d_target_objs} netbsd-d.o"
978 case ${enable_threads} in
979 "" | yes | posix) thread_file='posix' ;;
981 nbsd_tm_file="netbsd.h netbsd-stdint.h netbsd-elf.h"
982 default_use_cxa_atexit=yes
983 target_has_targetdm=yes
985 arm*-* | i[34567]86-* | powerpc*-* | sparc*-* | x86_64-*)
986 default_gnu_indirect_function=yes
989 rust_target_objs="${rust_target_objs} netbsd-rust.o"
990 target_has_targetrustm=yes
993 tmake_file="t-openbsd"
994 case ${enable_threads} in
1000 *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*)
1001 default_use_cxa_atexit=yes
1004 d_target_objs="${d_target_objs} openbsd-d.o"
1005 target_has_targetdm=yes
1006 rust_target_objs="${rust_target_objs} openbsd-rust.o"
1007 target_has_targetrustm=yes
1012 default_use_cxa_atexit=yes
1015 case ${enable_threads} in
1016 "" | yes | rtems) thread_file='rtems' ;;
1017 posix) thread_file='posix' ;;
1020 echo 'Unknown thread configuration for RTEMS'
1024 tmake_file="${tmake_file} t-rtems"
1025 extra_options="${extra_options} rtems.opt"
1026 default_use_cxa_atexit=yes
1030 extra_options="$extra_options gnu-user.opt"
1032 case ${enable_threads} in
1033 "" | yes | posix) thread_file='posix' ;;
1035 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
1041 # i?86-*-solaris2* needs to insert headers between cpu default and
1042 # Solaris 2 specific ones.
1043 sol2_tm_file_head="elfos.h ${cpu_type}/sysv4.h"
1044 sol2_tm_file_tail="${cpu_type}/sol2.h sol2.h"
1045 sol2_tm_file="${sol2_tm_file_head} ${sol2_tm_file_tail}"
1047 *-*-solaris2.1[1-9]*)
1048 # __cxa_atexit was introduced in Solaris 11.4.
1049 default_use_cxa_atexit=yes
1053 if test x$gnu_ld = xyes; then
1054 tm_file="usegld.h ${tm_file}"
1056 if test x$gas = xyes; then
1057 tm_file="usegas.h ${tm_file}"
1059 tm_p_file="${tm_p_file} sol2-protos.h"
1060 tmake_file="${tmake_file} t-sol2 t-slibgcc"
1061 c_target_objs="${c_target_objs} sol2-c.o"
1062 cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o"
1063 d_target_objs="${d_target_objs} sol2-d.o"
1064 extra_objs="${extra_objs} sol2.o sol2-stubs.o"
1065 extra_options="${extra_options} sol2.opt"
1066 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1067 "":yes:* | yes:yes:* )
1071 target_has_targetdm=yes
1072 rust_target_objs="${rust_target_objs} sol2-rust.o"
1073 target_has_targetrustm=yes
1076 extra_options="${extra_options} vms/vms.opt"
1077 xmake_file=vms/x-vms
1078 tmake_file="vms/t-vms t-slibgcc"
1080 target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.cc"
1081 tm_p_file="${tm_p_file} vms/vms-protos.h"
1082 xm_file="vms/xm-vms.h"
1083 c_target_objs="vms-c.o"
1084 cxx_target_objs="vms-c.o"
1085 fortran_target_objs="vms-f.o"
1086 use_gcc_stdint=provide
1087 tm_file="${tm_file} vms/vms-stdint.h"
1088 if test x$gnu_ld != xyes; then
1089 # Build wrappers for native case.
1090 extra_programs="ld\$(exeext) ar\$(exeext)"
1091 tmake_file="$tmake_file vms/t-vmsnative"
1095 tmake_file=t-vxworks
1098 extra_options="${extra_options} vxworks.opt"
1099 extra_objs="$extra_objs vxworks.o"
1101 c_target_objs="${c_target_objs} vxworks-c.o"
1102 cxx_target_objs="${cxx_target_objs} vxworks-c.o"
1103 extra_headers="${extra_headers} ../vxworks/vxworks-predef.h"
1104 target_has_targetcm="yes"
1106 rust_target_objs="${rust_target_objs} vxworks-rust.o"
1107 target_has_targetrustm=yes
1109 extra_gcc_objs="vxworks-driver.o"
1111 # This private header exposes a consistent interface for checks on
1112 # the VxWorks version our runtime header files need to perform, based on
1113 # what the system headers adverstise:
1115 extra_headers="${extra_headers} ../vxworks/_vxworks-versions.h"
1117 # Starting from VxWorks 7, the system comes with a Dinkumware
1118 # environment which requires the inclusion of "yvals.h" before other
1119 # system headers. We provide wrapped versions of a few headers to
1120 # accomodate such constraints:
1122 extra_headers="${extra_headers} ../vxworks/_yvals.h"
1123 extra_headers="${extra_headers} ../vxworks/_yvals-wrapper.h"
1125 extra_headers="${extra_headers} ../vxworks/math.h ../vxworks/complex.h"
1126 extra_headers="${extra_headers} ../vxworks/inttypes.h ../vxworks/setjmp.h"
1128 # We provide (a tailored version of) stdint.h
1129 tm_file="${tm_file} vxworks-stdint.h"
1130 use_gcc_stdint=provide
1132 case ${enable_threads} in
1134 "" | yes | vxworks) thread_file='vxworks' ;;
1135 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
1138 # A few common macro definitions conveying general characteristics
1139 # of the configuration at hand. Note that by VxWorks 7, we mean the
1140 # the SR6xx major update or beyond in vendor parlance:
1144 tm_defines="$tm_defines TARGET_VXWORKS7=1"
1149 tm_defines="$tm_defines TARGET_VXWORKS64=1"
1153 # Then a few build configuration controls for VxWorks 7, which
1154 # has specificities on top of which we aim to provide more complete
1159 # VxWorks 7 always has init/fini_array support and it is simpler to
1160 # just leverage this, sticking to what the system toolchain does:
1161 gcc_cv_initfini_array=yes
1165 *-*-elf|arc*-*-elf*)
1166 # Assume that newlib is being used and so __cxa_atexit is provided.
1167 default_use_cxa_atexit=yes
1170 case "${with_newlib}-${with_headers}" in
1171 no-no) use_gcc_stdint=provide ;;
1177 # Figure out if we need to enable heap trampolines by default
1180 # Currently, we do this for macOS 11 and above.
1181 tm_defines="$tm_defines HEAP_TRAMPOLINES_INIT=1"
1184 tm_defines="$tm_defines HEAP_TRAMPOLINES_INIT=0"
1189 aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
1190 tm_file="${tm_file} elfos.h newlib-stdint.h"
1191 tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-elf-raw.h"
1192 tmake_file="${tmake_file} aarch64/t-aarch64"
1198 tm_file="${tm_file} fuchsia.h"
1201 tm_file="${tm_file} aarch64/rtems.h rtems.h"
1206 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1209 aarch64_multilibs="${with_multilib_list}"
1210 if test "$aarch64_multilibs" = "default"; then
1211 aarch64_multilibs="lp64,ilp32"
1213 aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'`
1214 for aarch64_multilib in ${aarch64_multilibs}; do
1215 case ${aarch64_multilib} in
1217 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}"
1220 echo "--with-multilib-list=${aarch64_multilib} not supported."
1224 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1226 aarch64*-*-freebsd*)
1227 tm_file="${tm_file} elfos.h ${fbsd_tm_file}"
1228 tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-freebsd.h"
1229 tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-freebsd"
1230 tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
1233 tm_file="${tm_file} elfos.h ${nbsd_tm_file}"
1234 tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-netbsd.h"
1235 tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-netbsd"
1236 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1239 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h"
1240 tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-linux.h"
1241 tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux"
1242 tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
1245 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1248 aarch64_multilibs="${with_multilib_list}"
1249 if test "$aarch64_multilibs" = "default"; then
1250 # TODO: turn on ILP32 multilib build after its support is mature.
1251 # aarch64_multilibs="lp64,ilp32"
1252 aarch64_multilibs="lp64"
1254 aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'`
1255 for aarch64_multilib in ${aarch64_multilibs}; do
1256 case ${aarch64_multilib} in
1258 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}"
1261 echo "--with-multilib-list=${aarch64_multilib} not supported."
1265 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1267 aarch64*-wrs-vxworks*)
1268 tm_file="${tm_file} elfos.h aarch64/aarch64-elf.h"
1269 tm_file="${tm_file} vx-common.h vxworks.h aarch64/aarch64-vxworks.h"
1270 tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-vxworks"
1273 tm_file="elfos.h ${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
1274 tmake_file="${tmake_file} alpha/t-linux alpha/t-alpha"
1275 extra_options="${extra_options} alpha/elf.opt"
1278 tm_file="elfos.h ${tm_file} ${nbsd_tm_file} alpha/elf.h alpha/netbsd.h"
1279 tmake_file="${tmake_file} alpha/t-alpha"
1280 extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
1284 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
1285 tm_file="elfos.h alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
1286 tmake_file="${tmake_file} alpha/t-alpha"
1287 extra_options="${extra_options} openbsd.opt alpha/elf.opt"
1288 # default x-alpha is only appropriate for dec-osf.
1291 tm_file="${tm_file} vms/vms.h alpha/vms.h"
1292 tmake_file="${tmake_file} alpha/t-vms alpha/t-alpha"
1295 tm_file="arc/arc-arch.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}"
1296 tmake_file="arc/t-multilib arc/t-arc"
1297 extra_gcc_objs="driver-arc.o"
1298 if test "x$with_cpu" != x; then
1299 tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu"
1301 if test x${with_endian} = x; then
1303 arc*be-*-* | arc*eb-*-*) with_endian=big ;;
1304 *) with_endian=little ;;
1307 case ${with_endian} in
1309 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
1311 case ${with_endian} in
1312 big*) tm_file="arc/big.h ${tm_file}"
1316 tm_file="arc/arc-arch.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}"
1317 tmake_file="${tmake_file} arc/t-multilib-linux arc/t-arc"
1318 extra_gcc_objs="driver-arc.o"
1319 if test "x$with_cpu" != x; then
1320 tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu"
1322 if test x${with_endian} = x; then
1324 arc*be-*-* | arc*eb-*-*) with_endian=big ;;
1325 *) with_endian=little ;;
1328 case ${with_endian} in
1330 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
1332 case ${with_endian} in
1333 big*) tm_file="arc/big.h ${tm_file}"
1335 # Force .init_array support. The configure script cannot always
1336 # automatically detect that GAS supports it, yet we require it.
1337 gcc_cv_initfini_array=yes
1340 # We only support VxWorks 7 now on ARM, post SR600. Pre SR600
1341 # VxWorks 7 was transitory and major versions prior to 7 were based
1342 # on long deprecated ABI, not supported at all any more regardless
1344 extra_options="${extra_options} arm/vxworks.opt"
1345 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks arm/t-bpabi"
1346 tm_file="elfos.h arm/elf.h arm/bpabi.h arm/aout.h ${tm_file}"
1347 tm_file="${tm_file} vx-common.h vxworks.h arm/vxworks.h"
1348 target_cpu_cname="generic-armv7-a"
1349 need_64bit_hwint=yes
1351 arm*-*-freebsd*) # ARM FreeBSD EABI
1352 tm_file="elfos.h ${fbsd_tm_file} arm/elf.h"
1355 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1358 tmake_file="${tmake_file} arm/t-arm arm/t-bpabi"
1359 tm_file="${tm_file} arm/bpabi.h arm/freebsd.h arm/aout.h arm/arm.h"
1362 target_cpu_cname="arm1176jzf-s"
1363 if test $fbsd_major -ge 11; then
1364 tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1"
1368 target_cpu_cname="generic-armv7-a"
1369 tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1"
1372 target_cpu_cname="arm9"
1375 with_tls=${with_tls:-gnu}
1378 target_cpu_cname="strongarm"
1379 tmake_file="${tmake_file} arm/t-arm"
1380 tm_file="elfos.h ${nbsd_tm_file} arm/elf.h"
1381 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1383 arm*eb-*) tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" ;;
1386 arm*-*-netbsdelf-*eabi*)
1387 tm_file="$tm_file arm/bpabi.h arm/netbsd-elf.h arm/netbsd-eabi.h"
1388 tmake_file="$tmake_file arm/t-bpabi arm/t-netbsdeabi"
1391 tm_file="$tm_file arm/netbsd-elf.h"
1392 tmake_file="$tmake_file arm/t-netbsd"
1395 tm_file="${tm_file} arm/aout.h arm/arm.h"
1397 arm*-*-netbsdelf-*eabihf*)
1398 # Hard-float requires at least Arm v5te
1399 target_cpu_cname="arm10e"
1400 tm_defines="${tm_defines} TARGET_DEFAULT_FLOAT_ABI=ARM_FLOAT_ABI_HARD"
1404 armv6*) target_cpu_cname="arm1176jzf-s";;
1405 armv7*) target_cpu_cname="generic-armv7-a";;
1408 arm*-*-linux-* | arm*-*-uclinuxfdpiceabi)
1409 tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
1410 extra_options="${extra_options} linux-android.opt"
1413 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1416 tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
1417 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h arm/aout.h arm/arm.h"
1419 arm*-*-uclinuxfdpiceabi)
1420 tm_file="$tm_file arm/uclinuxfdpiceabi.h"
1423 # Define with_float to "hard" if not already defined and
1424 # target name ends with "hf"
1425 case $target:$with_float in
1430 # Generation of floating-point instructions requires at least ARMv5te.
1431 if [ "$with_float" = "hard" -o "$with_float" = "softfp" ] ; then
1432 target_cpu_cname="arm10e"
1434 target_cpu_cname="arm10tdmi"
1436 # Define multilib configuration for arm-linux-androideabi.
1439 tmake_file="$tmake_file arm/t-linux-androideabi"
1442 # The EABI requires the use of __cxa_atexit.
1443 default_use_cxa_atexit=yes
1444 with_tls=${with_tls:-gnu}
1446 arm*-*-uclinux*eabi*) # ARM ucLinux
1447 tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
1448 tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi"
1449 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h"
1450 target_cpu_cname="arm7tdmi"
1451 # The EABI requires the use of __cxa_atexit.
1452 default_use_cxa_atexit=yes
1455 tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
1456 tm_file="${tm_file} newlib-stdint.h phoenix.h"
1457 tm_file="${tm_file} arm/aout.h arm/arm.h"
1458 tmake_file="${tmake_file} arm/t-arm arm/t-bpabi arm/t-phoenix"
1459 target_cpu_cname="arm7tdmi"
1461 arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
1464 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1466 default_use_cxa_atexit=yes
1467 tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
1468 tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf"
1469 target_cpu_cname="arm7tdmi"
1472 tm_file="$tm_file newlib-stdint.h"
1473 tmake_file="${tmake_file} arm/t-bpabi"
1477 tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h"
1478 tmake_file="${tmake_file} arm/t-bpabi arm/t-fuchsia"
1479 target_cpu_cname="generic-armv7-a"
1482 tm_file="${tm_file} arm/rtems.h rtems.h newlib-stdint.h"
1483 tmake_file="${tmake_file} arm/t-bpabi arm/t-rtems"
1486 tm_file="${tm_file} arm/symbian.h"
1487 # We do not include t-bpabi for Symbian OS because the system
1488 # provides its own implementation of the BPABI functions.
1489 tmake_file="${tmake_file} arm/t-symbian"
1490 target_cpu_cname="arm10tdmi"
1493 tm_file="${tm_file} arm/aout.h arm/arm.h"
1496 tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h avr/avr-stdint.h"
1497 if test x${with_avrlibc} != xno; then
1498 tm_file="${tm_file} ${cpu_type}/avrlibc.h"
1499 tm_defines="${tm_defines} WITH_AVRLIBC"
1501 # Work out avr_double_comparison which is 2 or 3 and is used in
1502 # target hook FLOAT_LIB_COMPARE_RETURNS_BOOL to determine whether
1503 # DFmode comparisons return 3-state or 2-state results.
1504 case y${with_double_comparison} in
1506 avr_double_comparison=3
1509 avr_double_comparison=2
1512 echo "Error: --with-double-comparison= can only be used with: 'tristate', 'bool', 'libf7'" 1>&2
1516 case "y${with_libf7}" in
1518 # avr_double_comparison as set above.
1521 avr_double_comparison=2
1522 tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
1524 y | yyes | ymath-symbols)
1525 avr_double_comparison=2
1526 tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
1527 tm_defines="${tm_defines} WITH_LIBF7_MATH"
1528 tm_defines="${tm_defines} WITH_LIBF7_MATH_SYMBOLS"
1531 avr_double_comparison=2
1532 tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
1533 tm_defines="${tm_defines} WITH_LIBF7_MATH"
1536 echo "Error: --with-libf7=${with_libf7} but can only be used with: 'libgcc', 'math', 'math-symbols', 'yes', 'no'" 1>&2
1540 tm_defines="${tm_defines} WITH_DOUBLE_COMPARISON=${avr_double_comparison}"
1541 case y${with_double} in
1544 tm_defines="${tm_defines} HAVE_DOUBLE32"
1548 tm_defines="${tm_defines} HAVE_DOUBLE64"
1552 avr_double_multilib=1
1553 tm_defines="${tm_defines} HAVE_DOUBLE32"
1554 tm_defines="${tm_defines} HAVE_DOUBLE64"
1555 tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB"
1559 avr_double_multilib=1
1560 tm_defines="${tm_defines} HAVE_DOUBLE32"
1561 tm_defines="${tm_defines} HAVE_DOUBLE64"
1562 tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB"
1565 echo "Error: --with-double= can only be used with: '32', '32,64', '64,32', '64'" 1>&2
1569 case y${with_long_double} in
1572 tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
1576 tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
1580 avr_long_double_multilib=1
1581 tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
1582 tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
1583 tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB"
1587 avr_long_double_multilib=1
1588 tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
1589 tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
1590 tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB"
1593 avr_long_double=${avr_double}
1594 tm_defines="${tm_defines} HAVE_LONG_DOUBLE_IS_DOUBLE"
1595 if test y${avr_double_multilib} = y1; then
1596 tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
1597 tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
1599 tm_defines="${tm_defines} HAVE_LONG_DOUBLE${avr_long_double}"
1603 echo "Error: --with-long_double= can only be used with: '32', '32,64', '64,32', '64', 'double'" 1>&2
1607 if test ${avr_long_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 32xy1z; then
1608 if test y${with_long_double} != ydouble; then
1609 echo "Error: --with-double=${with_double} requests a multilib for double, but long double is always 32 bits wide due to --with-long-double=${with_long_double}" 1>&2
1613 if test ${avr_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 64x1yz; then
1614 echo "Error: --with-long-double=${with_long_double} requests a multilib for long double, but double is always 64 bits wide due to --with-double=64" 1>&2
1617 if test y${avr_double}${avr_long_double} = y6432; then
1618 echo "Error: double default of 64 bits from --with-double=${with_double} conflicts with default of 32 bits for long double from --with-long-double=${with_long_double}" 1>&2
1621 tm_defines="${tm_defines} WITH_DOUBLE${avr_double}"
1622 tm_defines="${tm_defines} WITH_LONG_DOUBLE${avr_long_double}"
1623 tmake_file="${tmake_file} avr/t-avr avr/t-multilib"
1625 extra_gcc_objs="driver-avr.o avr-devices.o"
1626 extra_objs="avr-devices.o avr-log.o"
1629 tm_file="${tm_file} elfos.h newlib-stdint.h bfin/elf.h"
1630 tmake_file=bfin/t-bfin-elf
1634 tm_file="${tm_file} elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
1635 tmake_file=bfin/t-bfin-uclinux
1638 bfin*-linux-uclibc*)
1639 tm_file="${tm_file} elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
1640 tmake_file="${tmake_file} bfin/t-bfin-linux"
1644 tm_file="${tm_file} elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
1645 tmake_file="${tmake_file} bfin/t-rtems"
1648 tm_file="${tm_file} elfos.h newlib-stdint.h bfin/elf.h"
1653 tm_file="elfos.h ${tm_file}"
1654 tmake_file="${tmake_file} bpf/t-bpf"
1656 use_gcc_stdint=provide
1657 extra_objs="btfext-out.o core-builtins.o"
1658 target_gtfiles="$target_gtfiles \$(srcdir)/config/bpf/btfext-out.cc \$(srcdir)/config/bpf/core-builtins.cc"
1660 cris-*-elf | cris-*-none)
1661 tm_file="elfos.h newlib-stdint.h ${tm_file}"
1662 tmake_file="cris/t-cris cris/t-elfmulti"
1664 extra_options="${extra_options} cris/elf.opt"
1668 if test x${with_endian} != x; then
1669 case ${with_endian} in
1672 echo "with_endian=${with_endian} not supported."
1677 if test x${with_float} != x; then
1678 case ${with_float} in
1679 soft | hard | softfp) ;;
1681 "Unknown floating point type used in --with-float=$with_float"
1686 tm_file="csky/csky.h"
1687 md_file="csky/csky.md"
1688 out_file="csky/csky.cc"
1689 tm_p_file="${tm_p_file} csky/csky-protos.h"
1690 extra_options="${extra_options} csky/csky_tables.opt"
1692 if test x${enable_tpf_debug} = xyes; then
1693 tm_defines="${tm_defines} ENABLE_TPF_DEBUG"
1698 tm_file="elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h"
1699 tmake_file="csky/t-csky csky/t-csky-elf"
1700 default_use_cxa_atexit=no
1704 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h"
1705 tmake_file="${tmake_file} csky/t-csky"
1707 if test "x${enable_multilib}" = xyes ; then
1708 tm_defines="$tm_defines CSKY_ENABLE_MULTILIB"
1709 tmake_file="${tmake_file} csky/t-csky-linux"
1714 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
1715 # Force .init_array support. The configure script cannot always
1716 # automatically detect that GAS supports it, yet we require it.
1717 gcc_cv_initfini_array=yes
1719 csky-*-linux-uclibc*)
1720 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
1721 default_use_cxa_atexit=no
1724 echo "Unknown target $target"
1730 echo "Unknown target $target"
1735 epiphany-*-elf | epiphany-*-rtems*)
1736 tm_file="elfos.h ${tm_file}"
1737 tmake_file="${tmake_file} epiphany/t-epiphany"
1740 tm_file="${tm_file} epiphany/rtems.h rtems.h newlib-stdint.h"
1743 tm_file="${tm_file} newlib-stdint.h"
1746 extra_options="${extra_options} fused-madd.opt"
1747 extra_objs="${extra_objs} mode-switch-use.o resolve-sw-modes.o"
1748 tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}"
1749 extra_headers="epiphany_intrinsics.h"
1752 tm_file="elfos.h newlib-stdint.h ${tm_file}"
1755 tm_file="elfos.h newlib-stdint.h ${tm_file}"
1756 tmake_file=frv/t-frv
1759 tm_file="elfos.h ${tm_file} \
1760 gnu-user.h linux.h glibc-stdint.h frv/linux.h"
1761 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
1766 tm_file="elfos.h newlib-stdint.h ${tm_file}"
1767 tmake_file="${tmake_file} ft32/t-ft32"
1770 tm_file="elfos.h gcn/gcn-hsa.h gcn/gcn.h newlib-stdint.h"
1771 tmake_file="gcn/t-gcn-hsa"
1772 native_system_header_dir=/include
1773 extra_modes=gcn/gcn-modes.def
1774 extra_objs="${extra_objs} gcn-tree.o"
1776 x86_64*-*-linux-gnu )
1777 if test "$ac_cv_search_dlopen" != no; then
1778 extra_programs="${extra_programs} gcn-run\$(exeext)"
1782 if test x$enable_as_accelerator = xyes; then
1783 extra_programs="${extra_programs} mkoffload\$(exeext)"
1784 tm_file="${tm_file} gcn/offload.h"
1786 # Force .init_array support.
1787 gcc_cv_initfini_array=yes
1793 tm_file="elfos.h newlib-stdint.h ${tm_file}"
1794 tmake_file="${tmake_file} moxie/t-moxie"
1799 tm_file="elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
1800 tmake_file="${tmake_file} moxie/t-moxie"
1803 tmake_file="${tmake_file} moxie/t-moxie"
1804 tm_file="moxie/moxie.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
1809 tm_file="${tm_file} elfos.h moxie/moxiebox.h newlib-stdint.h"
1810 tmake_file="${tmake_file} moxie/t-moxiebox"
1813 tmake_file="h8300/t-h8300"
1814 tm_file="h8300/h8300.h elfos.h newlib-stdint.h h8300/elf.h"
1817 tmake_file="${tmake_file} h8300/t-h8300 h8300/t-linux"
1818 tm_file="h8300/h8300.h elfos.h gnu-user.h linux.h glibc-stdint.h h8300/linux.h"
1821 target_cpu_default="MASK_PA_11|MASK_PA_20"
1822 tm_file="pa/pa64-start.h ${tm_file} elfos.h gnu-user.h linux.h \
1823 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1825 tmake_file="${tmake_file} pa/t-pa pa/t-linux"
1826 d_target_objs="${d_target_objs} pa-d.o"
1830 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS|MASK_CALLER_COPIES"
1831 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
1832 pa/pa32-regs.h pa/pa32-linux.h"
1833 tmake_file="${tmake_file} pa/t-pa pa/t-linux"
1834 d_target_objs="${d_target_objs} pa-d.o"
1837 target_cpu_default="MASK_PA_11"
1838 tm_file="${tm_file} elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
1839 pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h"
1840 extra_options="${extra_options} openbsd.opt"
1841 tmake_file="pa/t-pa"
1842 d_target_objs="${d_target_objs} pa-d.o"
1847 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1848 tm_file="${tm_file} elfos.h ${nbsd_tm_file} \
1849 pa/pa-netbsd.h pa/pa32-regs.h pa/pa32-netbsd.h"
1850 tmake_file="${tmake_file}"
1851 tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
1852 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1855 target_cpu_default="MASK_PA_11|MASK_PA_20"
1856 if test x$gnu_ld = xyes
1858 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1860 tm_file="pa/pa64-start.h ${tm_file} elfos.h \
1861 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1865 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1866 extra_options="${extra_options} pa/pa-hpux1111.opt"
1869 tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
1870 extra_options="${extra_options} pa/pa-hpux1131.opt"
1873 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1876 extra_options="${extra_options} pa/pa-hpux.opt \
1877 pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
1878 tmake_file="pa/t-pa t-slibgcc"
1879 d_target_objs="${d_target_objs} pa-d.o"
1880 case x${enable_threads} in
1888 use_gcc_stdint=provide
1889 tm_file="${tm_file} hpux-stdint.h"
1893 tm_file="${tm_file} hpux-stdint.h"
1897 i[34567]86-*-darwin1[89]* | i[34567]86-*-darwin2*)
1898 echo "Error: 32bit target is not supported after Darwin17" 1>&2
1900 i[34567]86-*-darwin*)
1902 # Baseline choice for a machine that allows m64 support.
1903 with_cpu=${with_cpu:-core2}
1904 tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch t-slibgcc"
1905 tm_file="${cpu_type}/darwin32-biarch.h ${tm_file} "
1907 x86_64-*-darwin1[89]* | x86_64-*-darwin2*)
1909 tm_defines="${tm_defines} TARGET_64BIT_DEFAULT=(OPTION_MASK_ISA_64BIT|OPTION_MASK_ABI_64)"
1910 tm_defines="${tm_defines} TARGET_BI_ARCH=0"
1911 with_cpu=${with_cpu:-core2}
1912 tmake_file="${tmake_file} t-slibgcc"
1915 with_cpu=${with_cpu:-core2}
1916 tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc"
1917 tm_file="${cpu_type}/darwin64-biarch.h ${tm_file} "
1919 i[34567]86-*-elfiamcu)
1920 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/iamcu.h"
1923 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h"
1926 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1929 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h"
1932 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h"
1935 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h"
1936 tmake_file="i386/t-i386elf t-svr4"
1938 i[34567]86-*-dragonfly*)
1939 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h"
1940 tmake_file="${tmake_file} i386/t-crtstuff"
1942 x86_64-*-dragonfly*)
1943 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h"
1944 tmake_file="${tmake_file} i386/t-crtstuff"
1946 i[34567]86-*-freebsd*)
1947 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1950 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1952 i[34567]86-*-netbsdelf*)
1953 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h"
1954 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1957 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h"
1958 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1960 i[34567]86-*-openbsd*)
1961 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
1962 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1963 extra_options="${extra_options} openbsd.opt"
1968 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
1969 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h"
1970 extra_options="${extra_options} openbsd.opt"
1974 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1975 # Intel 80386's running GNU/*
1976 # with ELF format using glibc 2
1977 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h gnu-user.h glibc-stdint.h"
1979 i[34567]86-*-linux*)
1980 tm_file="${tm_file} linux.h linux-android.h"
1981 extra_options="${extra_options} linux-android.opt"
1982 if test x$enable_targets = xall; then
1983 tm_file="${tm_file} i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h i386/linux-common.h i386/linux64.h"
1984 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1985 tmake_file="${tmake_file} i386/t-linux64"
1986 x86_multilibs="${with_multilib_list}"
1987 if test "$x86_multilibs" = "default"; then
1988 x86_multilibs="m64,m32"
1990 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1991 for x86_multilib in ${x86_multilibs}; do
1992 case ${x86_multilib} in
1994 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1997 echo "--with-multilib-list=${x86_with_multilib} not supported."
2001 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
2003 if test x$with_cpu = x; then
2004 if test x$with_cpu_64 = x; then
2008 case " $x86_cpus $x86_archs $x86_64_archs " in
2012 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
2013 echo "$x86_cpus $x86_archs $x86_64_archs " 1>&2
2019 tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h"
2022 i[34567]86-*-kfreebsd*-gnu)
2023 tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h"
2025 i[34567]86-*-kopensolaris*-gnu)
2026 tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h"
2029 tm_file="$tm_file i386/gnu-user-common.h i386/gnu-user.h gnu.h i386/gnu.h"
2033 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-gnu*)
2034 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h gnu-user.h glibc-stdint.h \
2035 i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h"
2038 tm_file="${tm_file} linux.h linux-android.h i386/linux-common.h i386/linux64.h"
2039 extra_options="${extra_options} linux-android.opt"
2041 x86_64-*-kfreebsd*-gnu)
2042 tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h"
2045 tm_file="${tm_file} gnu.h i386/gnu64.h"
2048 tmake_file="${tmake_file} i386/t-linux64"
2049 x86_multilibs="${with_multilib_list}"
2050 if test "$x86_multilibs" = "default"; then
2053 x86_multilibs="mx32"
2056 x86_multilibs="m64,m32"
2060 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
2061 for x86_multilib in ${x86_multilibs}; do
2062 case ${x86_multilib} in
2064 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
2067 echo "--with-multilib-list=${x86_with_multilib} not supported."
2071 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
2073 i[34567]86-pc-msdosdjgpp*)
2074 xm_file=i386/xm-djgpp.h
2075 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
2076 native_system_header_dir=/dev/env/DJDIR/include
2077 extra_options="${extra_options} i386/djgpp.opt"
2082 i[34567]86-*-lynxos*)
2084 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h i386/lynx.h lynx.h"
2085 tmake_file="${tmake_file} t-lynx"
2086 extra_options="${extra_options} lynx.opt"
2091 i[34567]86-*-nto-qnx*)
2092 tm_file="${tm_file} i386/att.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
2093 extra_options="${extra_options} i386/nto.opt"
2097 i[34567]86-*-rtems*)
2098 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
2099 tmake_file="${tmake_file} i386/t-rtems"
2101 i[34567]86-*-solaris2* | x86_64-*-solaris2*)
2102 # Set default arch_32 to pentium4, tune_32 to generic like the other
2103 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
2104 with_arch_32=${with_arch_32:-pentium4}
2105 with_tune_32=${with_tune_32:-generic}
2106 tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file_head} i386/x86-64.h ${sol2_tm_file_tail}"
2107 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
2108 tmake_file="$tmake_file i386/t-sol2"
2110 if test x$with_cpu = x; then
2111 if test x$with_cpu_64 = x; then
2115 case " $x86_cpus $x86_archs $x86_64_archs " in
2119 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
2120 echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
2126 i[4567]86-wrs-vxworks*|x86_64-wrs-vxworks7*)
2127 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
2131 tm_file="${tm_file} i386/x86-64.h"
2134 tm_file="${tm_file} vx-common.h"
2137 tm_file="${tm_file} vxworksae.h i386/vxworks.h i386/vxworksae.h"
2138 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
2141 tm_file="${tm_file} vxworks.h i386/vxworks.h"
2142 tmake_file="${tmake_file} i386/t-vxworks"
2146 i[34567]86-*-cygwin*)
2147 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
2148 xm_file=i386/xm-cygwin.h
2149 tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
2150 target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
2151 extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt"
2152 extra_objs="${extra_objs} winnt.o winnt-stubs.o"
2153 c_target_objs="${c_target_objs} msformat-c.o"
2154 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
2155 d_target_objs="${d_target_objs} cygwin-d.o"
2156 target_has_targetdm="yes"
2157 if test x$enable_threads = xyes; then
2160 default_use_cxa_atexit=yes
2165 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h"
2166 xm_file=i386/xm-cygwin.h
2167 tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
2168 target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
2169 extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt"
2170 extra_objs="${extra_objs} winnt.o winnt-stubs.o"
2171 c_target_objs="${c_target_objs} msformat-c.o"
2172 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
2173 d_target_objs="${d_target_objs} cygwin-d.o"
2174 target_has_targetdm="yes"
2175 if test x$enable_threads = xyes; then
2178 default_use_cxa_atexit=yes
2180 tm_defines="${tm_defines} TARGET_CYGWIN64=1"
2182 i[34567]86-*-mingw* | x86_64-*-mingw*)
2183 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h"
2184 xm_file=i386/xm-mingw32.h
2185 c_target_objs="${c_target_objs} winnt-c.o"
2186 cxx_target_objs="${cxx_target_objs} winnt-c.o"
2187 d_target_objs="${d_target_objs} winnt-d.o"
2188 target_has_targetcm="yes"
2189 target_has_targetdm="yes"
2190 rust_target_objs="${rust_target_objs} winnt-rust.o"
2191 target_has_targetrustm="yes"
2193 x86_64-*-* | *-w64-*)
2199 if test x$enable_threads = xposix ; then
2200 tm_file="${tm_file} i386/mingw-pthread.h"
2202 if test x$enable_threads = xmcf ; then
2203 tm_file="${tm_file} i386/mingw-mcfgthread.h"
2205 tm_file="${tm_file} i386/mingw32.h"
2206 # This makes the logic if mingw's or the w64 feature set has to be used
2209 user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
2210 user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
2211 tm_file="${tm_file} i386/mingw-w64.h"
2212 if test x$enable_targets = xall; then
2213 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
2214 if test x$with_cpu = x; then
2215 if test x$with_cpu_64 = x; then
2219 case " $x86_cpus $x86_archs $x86_64_archs " in
2223 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
2224 echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
2234 tm_file="${tm_file} i386/mingw-stdint.h"
2235 tmake_file="${tmake_file} t-winnt i386/t-cygming t-slibgcc"
2238 tmake_file="${tmake_file} i386/t-mingw-w64"
2241 tmake_file="${tmake_file} i386/t-mingw-w32"
2244 native_system_header_dir=/mingw/include
2245 target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
2246 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
2249 extra_options="${extra_options} i386/mingw-w64.opt"
2254 extra_objs="${extra_objs} winnt.o winnt-stubs.o"
2255 c_target_objs="${c_target_objs} msformat-c.o"
2256 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
2259 default_use_cxa_atexit=yes
2261 case ${enable_threads} in
2271 tm_file="${tm_file} i386/crtdll.h"
2273 *mingw32msv* | *mingw*)
2278 tmake_file="${tmake_file} i386/t-x86_64-elf"
2279 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h fuchsia.h"
2282 tm_file="${tm_file} elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
2283 tmake_file="ia64/t-ia64"
2284 target_cpu_default="0"
2285 if test x$gas = xyes
2287 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
2289 if test x$gnu_ld = xyes
2291 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
2295 tm_file="${tm_file} elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
2296 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
2297 tmake_file="${tmake_file} ia64/t-ia64"
2300 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
2301 tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
2302 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
2305 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/hpux.h"
2306 tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
2307 target_cpu_default="MASK_GNU_AS"
2308 case x$enable_threads in
2314 c_target_objs="ia64-c.o"
2315 cxx_target_objs="ia64-c.o"
2316 extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
2318 tm_file="${tm_file} hpux-stdint.h"
2321 tm_file="${tm_file} ia64/hpux-unix2003.h"
2326 tm_file="${tm_file} elfos.h ia64/sysv4.h vms/vms.h ia64/vms.h"
2327 tmake_file="${tmake_file} ia64/t-ia64"
2328 target_cpu_default="0"
2329 if test x$gas = xyes
2331 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
2333 extra_options="${extra_options} ia64/vms.opt"
2336 tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
2337 out_file=iq2000/iq2000.cc
2338 md_file=iq2000/iq2000.md
2341 tm_file="elfos.h ${tm_file} newlib-stdint.h"
2342 tmake_file="${tmake_file} lm32/t-lm32"
2345 tm_file="elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
2346 tmake_file="${tmake_file} lm32/t-lm32"
2347 tmake_file="${tmake_file} lm32/t-rtems"
2350 tm_file="elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h lm32/uclinux-elf.h"
2351 tmake_file="${tmake_file} lm32/t-lm32"
2354 tm_file="elfos.h newlib-stdint.h ${tm_file}"
2357 tm_file="elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
2359 m68k-*-elf* | fido-*-elf*)
2362 # Check that $with_cpu makes sense.
2367 echo "Cannot accept --with-cpu=$with_cpu"
2374 default_m68k_cpu=68020
2378 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
2379 tm_defines="${tm_defines} MOTOROLA=1"
2380 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
2381 # Add multilibs for targets other than fido.
2386 tmake_file="$tmake_file m68k/t-mlibs"
2391 default_m68k_cpu=68020
2393 tm_file="${tm_file} elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h"
2394 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2395 tm_defines="${tm_defines} MOTOROLA=1 CHAR_FAST8=1 SHORT_FAST16=1"
2397 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
2398 # with uClibc, using the new GNU/Linux-style
2400 default_m68k_cpu=68020
2402 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
2403 extra_options="${extra_options} m68k/uclinux.opt"
2404 tm_defines="${tm_defines} MOTOROLA=1"
2405 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
2407 m68k-*-linux*) # Motorola m68k's running GNU/Linux
2408 # with ELF format using glibc 2
2409 # aka the GNU/Linux C library 6.
2410 default_m68k_cpu=68020
2412 with_arch=${with_arch:-m68k}
2413 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
2414 extra_options="${extra_options} m68k/ieee.opt"
2415 tm_defines="${tm_defines} MOTOROLA=1"
2416 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
2419 default_m68k_cpu=68020
2421 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff m68k/t-rtems m68k/t-mlibs"
2422 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
2423 tm_defines="${tm_defines} MOTOROLA=1"
2426 tm_file="elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
2427 tmake_file=mcore/t-mcore
2433 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
2436 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
2439 tm_file="${tm_file} gnu-user.h linux.h microblaze/linux.h"
2440 tm_file="${tm_file} glibc-stdint.h"
2441 c_target_objs="${c_target_objs} microblaze-c.o"
2442 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
2443 tmake_file="${tmake_file} microblaze/t-microblaze"
2444 tmake_file="${tmake_file} microblaze/t-microblaze-linux"
2446 microblaze*-*-rtems*)
2449 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
2452 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
2455 tm_file="${tm_file}"
2456 tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h"
2457 c_target_objs="${c_target_objs} microblaze-c.o"
2458 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
2459 tmake_file="${tmake_file} microblaze/t-microblaze"
2460 tmake_file="${tmake_file} microblaze/t-rtems"
2465 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
2468 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
2471 tm_file="${tm_file} newlib-stdint.h"
2472 c_target_objs="${c_target_objs} microblaze-c.o"
2473 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
2474 tmake_file="${tmake_file} microblaze/t-microblaze"
2477 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} riscv/linux.h"
2478 case "x${enable_multilib}" in
2480 xyes) tmake_file="${tmake_file} riscv/t-linux-multilib" ;;
2481 *) echo "Unknown value for enable_multilib"; exit 1
2483 tmake_file="${tmake_file} riscv/t-riscv riscv/t-linux"
2484 tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
2488 riscv32be-*|riscv64be-*)
2489 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
2492 # Force .init_array support. The configure script cannot always
2493 # automatically detect that GAS supports it, yet we require it.
2494 gcc_cv_initfini_array=yes
2496 riscv*-*-elf* | riscv*-*-rtems*)
2497 tm_file="elfos.h newlib-stdint.h ${tm_file} riscv/elf.h"
2500 tm_file="${tm_file} riscv/rtems.h rtems.h"
2501 tmake_file="${tmake_file} riscv/t-rtems"
2504 if test "x${with_multilib_generator}" = xdefault; then
2505 case "x${enable_multilib}" in
2507 xyes) tmake_file="${tmake_file} riscv/t-elf-multilib" ;;
2508 *) echo "Unknown value for enable_multilib"; exit 1
2512 tmake_file="${tmake_file} riscv/t-riscv"
2516 riscv32be-*|riscv64be-*)
2517 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
2520 # Force .init_array support. The configure script cannot always
2521 # automatically detect that GAS supports it, yet we require it.
2522 gcc_cv_initfini_array=yes
2525 tm_file="${tm_file} elfos.h ${fbsd_tm_file} riscv/freebsd.h"
2526 tmake_file="${tmake_file} riscv/t-riscv"
2530 riscv32be-*|riscv64be-*)
2531 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
2534 # Force .init_array support. The configure script cannot always
2535 # automatically detect that GAS supports it, yet we require it.
2536 gcc_cv_initfini_array=yes
2539 loongarch*-*-linux*)
2540 tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file}"
2541 tm_file="${tm_file} loongarch/gnu-user.h loongarch/linux.h loongarch/loongarch-driver.h"
2542 extra_options="${extra_options} linux-android.opt"
2543 tmake_file="${tmake_file} loongarch/t-multilib loongarch/t-linux"
2547 # Force .init_array support. The configure script cannot always
2548 # automatically detect that GAS supports it, yet we require it.
2549 gcc_cv_initfini_array=yes
2553 tm_file="elfos.h newlib-stdint.h ${tm_file}"
2554 tm_file="${tm_file} loongarch/elf.h loongarch/linux.h loongarch/loongarch-driver.h"
2555 tmake_file="${tmake_file} loongarch/t-multilib loongarch/t-linux"
2559 # For .init_array support. The configure script cannot always
2560 # automatically detect that GAS supports it, yet we require it.
2561 gcc_cv_initfini_array=yes
2564 mips*-*-netbsd*) # NetBSD/mips, either endian.
2565 target_cpu_default="MASK_ABICALLS"
2566 tm_file="elfos.h ${tm_file} mips/elf.h ${nbsd_tm_file} mips/netbsd.h"
2567 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2570 tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
2571 extra_options="${extra_options} linux-android.opt"
2572 tmake_file="${tmake_file} mips/t-img-linux"
2573 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
2574 with_arch_32="mips32r6"
2575 with_arch_64="mips64r6"
2580 tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
2581 extra_options="${extra_options} linux-android.opt"
2582 tmake_file="${tmake_file} mips/t-mti-linux"
2583 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
2584 with_arch_32="mips32r2"
2585 with_arch_64="mips64r2"
2589 mips*-*-linux*) # Linux MIPS, either endian.
2590 tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h"
2591 extra_options="${extra_options} linux-android.opt"
2594 default_mips_arch=mips32r6
2597 default_mips_arch=mips32r2
2600 default_mips_arch=mips32
2602 mips64el-st-linux-gnu)
2603 default_mips_abi=n32
2604 tm_file="${tm_file} mips/st.h"
2605 tmake_file="${tmake_file} mips/t-st"
2606 enable_mips_multilibs="yes"
2608 mips64octeon*-*-linux*)
2609 default_mips_abi=n32
2610 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
2611 target_cpu_default=MASK_SOFT_FLOAT_ABI
2612 enable_mips_multilibs="yes"
2614 mipsisa64r6*-*-linux-gnuabi64)
2616 default_mips_arch=mips64r6
2617 enable_mips_multilibs="yes"
2619 mipsisa64r6*-*-linux*)
2620 default_mips_abi=n32
2621 default_mips_arch=mips64r6
2622 enable_mips_multilibs="yes"
2624 mipsisa64r2*-*-linux-gnuabi64)
2626 default_mips_arch=mips64r2
2627 enable_mips_multilibs="yes"
2629 mipsisa64r2*-*-linux*)
2630 default_mips_abi=n32
2631 default_mips_arch=mips64r2
2632 enable_mips_multilibs="yes"
2634 mips64*-*-linux-gnuabi64 | mipsisa64*-*-linux-gnuabi64)
2636 enable_mips_multilibs="yes"
2638 mips64*-*-linux* | mipsisa64*-*-linux*)
2639 default_mips_abi=n32
2640 enable_mips_multilibs="yes"
2643 if test x$enable_targets = xall; then
2644 enable_mips_multilibs="yes"
2646 if test x$enable_mips_multilibs = xyes; then
2647 tmake_file="${tmake_file} mips/t-linux64"
2651 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h"
2652 tmake_file="mips/t-mti-elf"
2653 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
2654 with_arch_32="mips32r2"
2655 with_arch_64="mips64r2"
2658 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h"
2659 tmake_file="mips/t-img-elf"
2660 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
2661 with_arch_32="mips32r6"
2662 with_arch_64="mips64r6"
2665 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h"
2666 tmake_file="mips/t-sde"
2667 extra_options="${extra_options} mips/sde.opt"
2668 case "${with_newlib}" in
2670 # newlib / libgloss.
2673 # MIPS toolkit libraries.
2674 tm_file="$tm_file mips/sdemtk.h"
2675 tmake_file="$tmake_file mips/t-sdemtk"
2676 case ${enable_threads} in
2678 thread_file='mipssde'
2685 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
2688 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
2691 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32 MIPS_ABI_DEFAULT=ABI_32"
2694 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6 MIPS_ABI_DEFAULT=ABI_N32"
2697 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2 MIPS_ABI_DEFAULT=ABI_N32"
2700 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_ABI_DEFAULT=ABI_N32"
2704 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
2705 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
2706 mipsisa32r6-*-elf* | mipsisa32r6el-*-elf* | \
2707 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
2708 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf* | \
2709 mipsisa64r6-*-elf* | mipsisa64r6el-*-elf*)
2710 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2711 tmake_file="mips/t-isa3264"
2714 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6"
2717 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2"
2720 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32"
2723 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6"
2726 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2"
2729 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64"
2733 mipsisa32*-*-elfoabi*)
2734 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
2735 tm_file="${tm_file} mips/elfoabi.h"
2737 mipsisa64*-*-elfoabi*)
2738 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
2739 tm_file="${tm_file} mips/elfoabi.h"
2742 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
2746 mipsisa64sr71k-*-elf*)
2747 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2748 tmake_file=mips/t-sr71k
2749 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
2751 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
2752 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2753 tmake_file="mips/t-elf mips/t-sb1"
2754 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
2756 mips-*-elf* | mipsel-*-elf* | mipsr5900-*-elf* | mipsr5900el-*-elf*)
2757 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2758 tmake_file="mips/t-elf"
2760 mips64r5900-*-elf* | mips64r5900el-*-elf*)
2761 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h"
2762 tmake_file="mips/t-elf"
2763 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_N32"
2765 mips64-*-elf* | mips64el-*-elf*)
2766 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2767 tmake_file="mips/t-elf"
2768 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64"
2770 mips64vr-*-elf* | mips64vrel-*-elf*)
2771 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
2772 tmake_file=mips/t-vr
2773 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
2775 mips64orion-*-elf* | mips64orionel-*-elf*)
2776 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
2777 tmake_file="mips/t-elf"
2778 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64"
2781 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
2782 tmake_file="${tmake_file} mips/t-elf mips/t-rtems"
2785 tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
2786 tmake_file="${tmake_file} mips/t-vxworks"
2788 mipstx39-*-elf* | mipstx39el-*-elf*)
2789 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
2790 tmake_file="mips/t-r3900"
2792 mmix-knuth-mmixware)
2793 tm_file="${tm_file} newlib-stdint.h"
2797 tm_file="elfos.h newlib-stdint.h ${tm_file}"
2802 tm_file="elfos.h newlib-stdint.h ${tm_file}"
2803 c_target_objs="msp430-c.o"
2804 cxx_target_objs="msp430-c.o"
2805 tmake_file="${tmake_file} msp430/t-msp430"
2806 extra_objs="${extra_objs} msp430-devices.o"
2807 extra_gcc_objs="driver-msp430.o msp430-devices.o"
2808 # Enable .init_array unless it has been explicitly disabled.
2809 # The MSP430 EABI mandates the use of .init_array, and the Newlib CRT
2810 # code since mid-2019 expects it.
2811 if test x${disable_initfini_array} != xyes; then
2812 gcc_cv_initfini_array=yes
2816 # __cxa_atexit increases code size, and we don't need to support
2817 # dynamic shared objects on MSP430, so regular Newlib atexit is a
2818 # fine replacement as it also supports registration of more than 32
2820 default_use_cxa_atexit=no
2821 # This target does not match the generic *-*-elf case above which
2822 # sets use_gcc_stdint=wrap, so explicitly set it here.
2828 target_cpu_default="0"
2829 tm_defines="${tm_defines}"
2834 target_cpu_default="${target_cpu_default}|MASK_BIG_ENDIAN"
2835 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
2840 tm_file="elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h"
2841 tmake_file="nds32/t-nds32 nds32/t-elf"
2844 tm_file="elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h"
2845 tmake_file="${tmake_file} nds32/t-nds32 nds32/t-linux"
2846 gcc_cv_initfini_array=yes
2850 # Handle --enable-default-relax setting.
2851 if test x${enable_default_relax} = xyes; then
2852 tm_defines="${tm_defines} TARGET_DEFAULT_RELAX=1"
2854 # Handle --with-ext-dsp
2855 if test x${with_ext_dsp} = xyes; then
2856 tm_defines="${tm_defines} TARGET_DEFAULT_EXT_DSP=1"
2860 tm_file="elfos.h ${tm_file}"
2861 tmake_file="${tmake_file} nios2/t-nios2"
2864 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h nios2/linux.h "
2867 tm_file="${tm_file} newlib-stdint.h nios2/elf.h"
2868 extra_options="${extra_options} nios2/elf.opt"
2871 tm_file="${tm_file} newlib-stdint.h nios2/rtems.h rtems.h"
2872 tmake_file="${tmake_file} t-rtems nios2/t-rtems"
2877 tm_file="${tm_file} newlib-stdint.h"
2879 tmake_file="nvptx/t-nvptx"
2880 if test x$enable_as_accelerator = xyes; then
2881 extra_programs="${extra_programs} mkoffload\$(exeext)"
2882 tm_file="${tm_file} nvptx/offload.h"
2886 tm_file="elfos.h ${tm_file}"
2887 tmake_file="${tmake_file} or1k/t-or1k"
2888 # Force .init_array support. The configure script cannot always
2889 # automatically detect that GAS supports it, yet we require it.
2890 gcc_cv_initfini_array=yes
2892 # Handle --with-multilib-list=...
2893 or1k_multilibs="${with_multilib_list}"
2894 if test "$or1k_multilibs" = "default"; then
2895 or1k_multilibs="mcmov,msoft-mul,msoft-div"
2897 or1k_multilibs=`echo $or1k_multilibs | sed -e 's/,/ /g'`
2898 for or1k_multilib in ${or1k_multilibs}; do
2899 case ${or1k_multilib} in
2900 mcmov | msext | msfimm | \
2902 mhard-float | mdouble-float | munordered-float | msoft-float | \
2903 mhard-div | mhard-mul | \
2904 msoft-div | msoft-mul )
2905 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${or1k_multilib}"
2908 echo "--with-multilib-list=${with_multilib_list} not supported."
2912 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
2916 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h"
2917 tm_file="${tm_file} or1k/linux.h"
2920 tm_file="${tm_file} newlib-stdint.h or1k/elf.h"
2921 extra_options="${extra_options} or1k/elf.opt"
2924 tm_file="${tm_file} newlib-stdint.h or1k/rtems.h rtems.h"
2925 tmake_file="${tmake_file} or1k/t-rtems"
2930 tm_file="${tm_file} newlib-stdint.h"
2933 # port not yet contributed
2934 #powerpc-*-openbsd*)
2935 # tmake_file="${tmake_file} rs6000/t-fprules"
2939 extra_options="${extra_options} ${cpu_type}/darwin.opt"
2941 *-darwin1[0-9]* | *-darwin9*)
2942 tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch"
2943 tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h"
2946 tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch"
2947 tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h"
2950 tm_file="${tm_file} ${cpu_type}/darwin7.h"
2953 # Earlier - ingle arch, with 32b only
2954 # OS X 10.0, the first edition is Darwin4
2957 tmake_file="${tmake_file} t-slibgcc"
2959 powerpc64-*-darwin*)
2960 extra_options="${extra_options} ${cpu_type}/darwin.opt"
2961 tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc"
2962 tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h"
2964 powerpc*-*-freebsd*)
2965 tm_file="${tm_file} elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h"
2966 extra_options="${extra_options} rs6000/sysv4.opt"
2967 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2970 tm_file="${tm_file} rs6000/sysv4le.h" ;;
2974 tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
2975 tmake_file="${tmake_file} rs6000/t-freebsd64"
2976 extra_options="${extra_options} rs6000/linux64.opt"
2977 if test $fbsd_major -ge 13; then
2978 tm_defines="${tm_defines} TARGET_FREEBSD32_SECURE_PLT=1"
2982 if test $fbsd_major -ge 13; then
2983 tm_file="rs6000/secureplt.h ${tm_file}"
2985 tm_file="${tm_file} rs6000/freebsd.h"
2990 tm_file="${tm_file} elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
2991 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2992 tmake_file="${tmake_file} rs6000/t-netbsd"
2993 extra_options="${extra_options} rs6000/sysv4.opt"
2995 powerpc-*-eabisimaltivec*)
2996 tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
2997 extra_options="${extra_options} rs6000/sysv4.opt"
2998 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
3002 tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
3003 extra_options="${extra_options} rs6000/sysv4.opt"
3004 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3008 tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
3009 extra_options="${extra_options} rs6000/sysv4.opt"
3010 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3012 powerpc-*-eabialtivec*)
3013 tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
3014 extra_options="${extra_options} rs6000/sysv4.opt"
3015 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
3019 tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
3020 extra_options="${extra_options} rs6000/sysv4.opt"
3021 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3025 tm_file="rs6000/biarch64.h ${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h"
3026 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
3027 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-rtems rs6000/t-ppccomm"
3030 tm_file="${tm_file} elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h"
3031 extra_options="${extra_options} rs6000/sysv4.opt"
3032 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm"
3033 extra_objs="$extra_objs rs6000-linux.o"
3036 tm_file="${tm_file} rs6000/sysv4le.h" ;;
3038 case ${target}:${with_cpu} in
3039 powerpc64*: | powerpc64*:native) cpu_is_64bit=yes ;;
3041 maybe_biarch=${cpu_is_64bit}
3042 case ${enable_targets} in
3043 *powerpc64*) maybe_biarch=yes ;;
3044 all) maybe_biarch=yes ;;
3046 case ${target}:${enable_targets}:${maybe_biarch} in
3047 powerpc64-* | powerpc-*:*:yes | *:*powerpc64-*:yes | *:all:yes \
3048 | powerpc64le*:*powerpcle* | powerpc64le*:*powerpc-* \
3049 | powerpcle-*:*powerpc64le*:yes)
3050 if test x$cpu_is_64bit = xyes; then
3051 tm_file="${tm_file} rs6000/default64.h"
3053 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
3054 tmake_file="$tmake_file rs6000/t-linux64"
3057 tmake_file="$tmake_file rs6000/t-linux64le"
3058 case ${enable_targets} in
3059 all | *powerpc64-* | *powerpc-*)
3060 tmake_file="$tmake_file rs6000/t-linux64lebe" ;;
3063 case ${enable_targets} in
3064 all | *powerpc64le-* | *powerpcle-*)
3065 tmake_file="$tmake_file rs6000/t-linux64bele" ;;
3068 extra_options="${extra_options} rs6000/linux64.opt"
3071 tm_file="${tm_file} rs6000/default64.h rs6000/linux64.h glibc-stdint.h"
3072 extra_options="${extra_options} rs6000/linux64.opt"
3073 tmake_file="${tmake_file} rs6000/t-linux"
3076 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
3077 tmake_file="${tmake_file} rs6000/t-ppcos rs6000/t-linux"
3081 powerpc*-*-linux*ppc476*)
3082 tm_file="${tm_file} rs6000/476.h"
3083 extra_options="${extra_options} rs6000/476.opt" ;;
3084 powerpc*-*-linux*altivec*)
3085 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
3089 enable_secureplt=yes ;;
3091 if test x${enable_secureplt} = xyes; then
3092 tm_file="rs6000/secureplt.h ${tm_file}"
3095 powerpc*-wrs-vxworks7r*)
3097 # Wind River 7 post SR0600 is mostly like Linux so we setup
3098 # our config in a very similar fashion and adjust to a few
3101 # The system compiler is configured with secureplt by default.
3102 tm_file="${tm_file} rs6000/secureplt.h"
3104 tm_file="${tm_file} elfos.h gnu-user.h linux.h freebsd-spec.h"
3105 tm_file="${tm_file} rs6000/sysv4.h rs6000/biarch64.h rs6000/default64.h rs6000/linux64.h"
3106 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
3108 extra_options="${extra_options} rs6000/sysv4.opt linux.opt rs6000/linux64.opt"
3110 tmake_file="${tmake_file} t-linux rs6000/t-linux64 rs6000/t-fprules rs6000/t-ppccomm"
3111 tmake_file="${tmake_file} rs6000/t-vxworks"
3113 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
3114 extra_objs="$extra_objs linux.o rs6000-linux.o"
3116 powerpc-wrs-vxworks*)
3117 tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h rs6000/sysv4.h"
3118 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
3119 extra_options="${extra_options} rs6000/sysv4.opt vxworks-smp.opt"
3120 extra_headers="${extra_headers} ppc-asm.h"
3123 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksmils.h"
3124 tmake_file="${tmake_file} rs6000/t-vxworksmils"
3127 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
3128 tmake_file="${tmake_file} rs6000/t-vxworksae"
3131 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
3137 tm_file="${tm_file} elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
3138 tmake_file="t-lynx rs6000/t-lynx"
3139 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
3145 tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
3146 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3147 extra_options="${extra_options} rs6000/sysv4.opt"
3149 powerpcle-*-eabisim*)
3150 tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
3151 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3152 extra_options="${extra_options} rs6000/sysv4.opt"
3156 tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
3157 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3158 extra_options="${extra_options} rs6000/sysv4.opt"
3162 tm_file="elfos.h newlib-stdint.h ${tm_file}"
3163 tmake_file="${tmake_file} pru/t-pru"
3164 extra_objs="pru-pragma.o pru-passes.o"
3167 rs6000-ibm-aix7.1.* | powerpc-ibm-aix7.1.*)
3168 tmake_file="rs6000/t-aix52 t-slibgcc"
3169 if test x$cpu_is_64bit = xyes; then
3170 tm_file="${tm_file} rs6000/biarch64.h"
3171 tmake_file="rs6000/t-aix64 t-slibgcc"
3173 tm_file="${tm_file} rs6000/aix.h rs6000/aix71.h rs6000/xcoff.h rs6000/aix-stdint.h"
3174 extra_options="${extra_options} rs6000/aix64.opt"
3178 default_use_cxa_atexit=yes
3180 rs6000-ibm-aix7.2.* | powerpc-ibm-aix7.2.*)
3181 tmake_file="rs6000/t-aix52 t-slibgcc"
3182 if test x$cpu_is_64bit = xyes; then
3183 tm_file="${tm_file} rs6000/biarch64.h"
3184 tmake_file="rs6000/t-aix64 t-slibgcc"
3186 tm_file="${tm_file} rs6000/aix.h rs6000/aix72.h rs6000/xcoff.h rs6000/aix-stdint.h"
3187 extra_options="${extra_options} rs6000/aix64.opt"
3191 default_use_cxa_atexit=yes
3193 rs6000-ibm-aix[789].* | powerpc-ibm-aix[789].*)
3194 tmake_file="rs6000/t-aix52 t-slibgcc"
3195 if test x$cpu_is_64bit = xyes; then
3196 tm_file="${tm_file} rs6000/biarch64.h"
3197 tmake_file="rs6000/t-aix64 t-slibgcc"
3199 tm_file="${tm_file} rs6000/aix.h rs6000/aix73.h rs6000/xcoff.h rs6000/aix-stdint.h"
3200 extra_options="${extra_options} rs6000/aix64.opt"
3204 default_use_cxa_atexit=yes
3207 tm_file="elfos.h newlib-stdint.h ${tm_file}"
3208 target_has_targetm_common=no
3209 c_target_objs="rl78-c.o"
3210 cxx_target_objs="rl78-c.o"
3211 tmake_file="${tmake_file} rl78/t-rl78"
3214 tm_file="elfos.h newlib-stdint.h ${tm_file}"
3215 tmake_file="${tmake_file} rx/t-rx"
3216 extra_options="${extra_options} rx/elf.opt"
3219 tm_file="elfos.h linux.h glibc-stdint.h rx/linux.h ../../libgcc/config/rx/rx-abi.h"
3220 tmake_file="${tmake_file} rx/t-linux"
3223 tm_file="s390/s390.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
3224 c_target_objs="${c_target_objs} s390-c.o"
3225 cxx_target_objs="${cxx_target_objs} s390-c.o"
3226 if test x$enable_targets = xall; then
3227 tmake_file="${tmake_file} s390/t-linux64"
3229 tmake_file="${tmake_file} s390/t-s390"
3232 tm_file="s390/s390x.h s390/s390.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
3233 tm_p_file="linux-protos.h s390/s390-protos.h"
3234 c_target_objs="${c_target_objs} s390-c.o"
3235 cxx_target_objs="${cxx_target_objs} s390-c.o"
3236 md_file=s390/s390.md
3237 extra_modes=s390/s390-modes.def
3238 out_file=s390/s390.cc
3239 tmake_file="${tmake_file} s390/t-linux64 s390/t-s390"
3242 tm_file="s390/s390x.h s390/s390.h elfos.h glibc-stdint.h s390/tpf.h"
3243 tm_p_file=s390/s390-protos.h
3244 c_target_objs="${c_target_objs} s390-c.o"
3245 cxx_target_objs="${cxx_target_objs} s390-c.o"
3246 md_file=s390/s390.md
3247 extra_modes=s390/s390-modes.def
3248 out_file=s390/s390.cc
3250 extra_options="${extra_options} s390/tpf.opt"
3251 tmake_file="${tmake_file} s390/t-s390"
3253 sh-*-elf* | sh[12346l]*-*-elf* | \
3254 sh-*-linux* | sh[2346lbe]*-*-linux* | \
3255 sh-*-netbsdelf* | shl*-*-netbsdelf*)
3256 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
3257 if test x${with_endian} = x; then
3259 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
3260 shbe-*-* | sheb-*-*) with_endian=big,little ;;
3261 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
3262 shl* | sh*-*-linux* | \
3263 sh-superh-elf) with_endian=little,big ;;
3264 sh[1234]*-*-*) with_endian=big ;;
3265 *) with_endian=big,little ;;
3268 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
3269 # First word : the default endian.
3270 # Second word: the secondary endian (optional).
3271 case ${with_endian} in
3272 big) TM_ENDIAN_CONFIG=mb ;;
3273 little) TM_ENDIAN_CONFIG=ml ;;
3274 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
3275 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
3276 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
3278 case ${with_endian} in
3279 little*) tm_file="sh/little.h ${tm_file}" ;;
3281 tm_file="${tm_file} elfos.h sh/elf.h"
3283 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
3284 if test x$enable_fdpic = xyes; then
3285 tm_defines="$tm_defines FDPIC_DEFAULT=1"
3287 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
3289 tm_file="${tm_file} ${nbsd_tm_file} sh/netbsd-elf.h"
3290 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
3293 sh*-superh-elf) if test x$with_libgloss != xno; then
3295 tm_file="${tm_file} sh/newlib.h"
3297 tm_file="${tm_file} sh/embed-elf.h"
3298 tm_file="${tm_file} sh/superh.h"
3299 extra_options="${extra_options} sh/superh.opt" ;;
3300 *) if test x$with_newlib = xyes \
3301 && test x$with_libgloss = xyes; then
3302 tm_file="${tm_file} sh/newlib.h"
3304 tm_file="${tm_file} sh/embed-elf.h" ;;
3310 tm_file="${tm_file} newlib-stdint.h"
3313 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
3314 case `echo ${target} | sed 's/e[lb]-/-/'` in
3315 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
3316 sh4a_single*) sh_cpu_target=sh4a-single ;;
3317 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
3318 sh4al) sh_cpu_target=sh4al ;;
3319 sh4a*) sh_cpu_target=sh4a ;;
3320 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
3321 sh4_single*) sh_cpu_target=sh4-single ;;
3322 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
3323 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
3324 sh3e*) sh_cpu_target=sh3e ;;
3325 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
3326 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
3327 sh2a_single*) sh_cpu_target=sh2a-single ;;
3328 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
3329 sh2a*) sh_cpu_target=sh2a ;;
3330 sh2e*) sh_cpu_target=sh2e ;;
3331 sh2*) sh_cpu_target=sh2 ;;
3332 *) sh_cpu_target=sh1 ;;
3334 # did the user say --without-fp ?
3335 if test x$with_fp = xno; then
3336 case ${sh_cpu_target} in
3338 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
3339 sh4*) sh_cpu_target=sh4-nofpu ;;
3340 sh3*) sh_cpu_target=sh3 ;;
3341 sh2a*) sh_cpu_target=sh2a-nofpu ;;
3342 sh2*) sh_cpu_target=sh2 ;;
3343 *) echo --without-fp not available for $target: ignored
3345 tm_defines="$tm_defines STRICT_NOFPU=1"
3347 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
3348 case $sh_cpu_default in
3349 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
3350 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
3351 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
3352 sh3e | sh3 | sh2e | sh2 | sh1) ;;
3353 "") sh_cpu_default=${sh_cpu_target} ;;
3354 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
3356 sh_multilibs=${with_multilib_list}
3357 if test "$sh_multilibs" = "default" ; then
3359 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
3360 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
3361 sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4 ;;
3362 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
3363 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
3365 if test x$with_fp = xno; then
3366 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
3369 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
3370 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
3371 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
3372 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
3373 for sh_multilib in ${sh_multilibs}; do
3374 case ${sh_multilib} in
3375 m1 | m2 | m2e | m3 | m3e | \
3376 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
3377 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
3378 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3379 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
3380 # It is passed to MULTIILIB_OPTIONS verbatim.
3381 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
3382 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
3384 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
3385 # It is passed the MULTILIB_EXCEPTIONS verbatim.
3386 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
3388 echo "with_multilib_list=${sh_multilib} not supported."
3393 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
3394 if test x${enable_incomplete_targets} = xyes ; then
3395 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1"
3397 tm_file="$tm_file ./sysroot-suffix.h"
3398 tmake_file="$tmake_file t-sysroot-suffix"
3401 tmake_file="${tmake_file} sh/t-sh sh/t-rtems"
3402 tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
3405 tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
3406 tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
3409 tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
3412 tmake_file="sparc/t-sparc sparc/t-leon"
3415 tmake_file="sparc/t-sparc sparc/t-leon3"
3418 tmake_file="sparc/t-sparc sparc/t-elf"
3423 tm_file="${tm_file} elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
3424 tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems"
3427 tm_file="${tm_file} elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
3428 extra_options="${extra_options} sparc/long-double-switch.opt"
3431 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon"
3434 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3"
3437 tmake_file="${tmake_file} sparc/t-sparc"
3440 if test x$enable_targets = xall; then
3441 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
3442 tmake_file="${tmake_file} sparc/t-linux64"
3444 tm_file="${tm_file} sparc/linux.h"
3445 tmake_file="${tmake_file} sparc/t-linux"
3449 tm_file="${tm_file} elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
3450 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
3451 extra_options="${extra_options} sparc/long-double-switch.opt"
3452 tmake_file="${tmake_file} sparc/t-sparc"
3455 tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sparc/tso.h"
3457 sparc64-*-* | sparcv9-*-*)
3458 tm_file="sparc/default64.h ${tm_file}"
3461 test x$with_cpu != x || with_cpu=v9
3464 tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2"
3467 tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
3468 tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
3471 tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
3472 extra_options="${extra_options}"
3473 tmake_file="${tmake_file} sparc/t-sparc"
3476 tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
3477 extra_options="${extra_options}"
3478 tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64"
3481 tm_file="sparc/biarch64.h ${tm_file} elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h"
3482 extra_options="${extra_options} sparc/long-double-switch.opt"
3483 tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
3485 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
3486 tm_file="${tm_file} ${fbsd_tm_file} elfos.h sparc/sysv4.h sparc/freebsd.h"
3487 extra_options="${extra_options} sparc/long-double-switch.opt"
3488 case "x$with_cpu" in
3490 x) with_cpu=ultrasparc ;;
3491 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
3493 tmake_file="${tmake_file} sparc/t-sparc"
3496 tm_file="sparc/biarch64.h ${tm_file}"
3497 tm_file="${tm_file} elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
3498 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
3499 extra_options="${extra_options} sparc/long-double-switch.opt"
3500 tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
3503 tm_file="sparc/openbsd1-64.h ${tm_file} elfos.h sparc/sysv4.h sparc/sp64-elf.h"
3504 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
3505 extra_options="${extra_options} openbsd.opt"
3506 extra_options="${extra_options}"
3509 tmake_file="${tmake_file} sparc/t-sparc"
3512 tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
3513 tm_file="${tm_file} tm-dwarf2.h newlib-stdint.h"
3514 tmake_file="c6x/t-c6x c6x/t-c6x-elf"
3518 tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
3519 tm_file="${tm_file} tm-dwarf2.h glibc-stdint.h"
3520 tm_file="${tm_file} ./sysroot-suffix.h"
3521 tmake_file="t-sysroot-suffix t-slibgcc"
3522 tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
3526 target_cpu_default="TARGET_CPU_generic"
3527 tm_file="elfos.h v850/v850.h"
3528 tm_file="${tm_file} v850/rtems.h rtems.h newlib-stdint.h"
3529 tmake_file="${tmake_file} v850/t-v850"
3530 tmake_file="${tmake_file} v850/t-rtems"
3532 c_target_objs="v850-c.o"
3533 cxx_target_objs="v850-c.o"
3538 target_cpu_default="TARGET_CPU_v850e3v5"
3541 target_cpu_default="TARGET_CPU_v850e2v3"
3544 target_cpu_default="TARGET_CPU_v850e2"
3546 v850e1-*-* | v850es-*-*)
3547 target_cpu_default="TARGET_CPU_v850e1"
3550 target_cpu_default="TARGET_CPU_v850e"
3553 target_cpu_default="TARGET_CPU_generic"
3556 tm_file="elfos.h newlib-stdint.h v850/v850.h"
3558 c_target_objs="v850-c.o"
3559 cxx_target_objs="v850-c.o"
3563 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h vax/elf.h vax/linux.h"
3564 extra_options="${extra_options} vax/elf.opt"
3567 tm_file="${tm_file} elfos.h ${nbsd_tm_file} vax/elf.h vax/netbsd-elf.h"
3568 extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
3569 tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
3572 tm_file="elfos.h ${tm_file} visium/elf.h newlib-stdint.h"
3573 tmake_file="visium/t-visium visium/t-crtstuff"
3576 # For historical reasons, the target files omit the 'x'.
3577 tm_file="elfos.h newlib-stdint.h stormy16/stormy16.h"
3578 tm_p_file=stormy16/stormy16-protos.h
3579 md_file=stormy16/stormy16.md
3580 out_file=stormy16/stormy16.cc
3581 extra_options=stormy16/stormy16.opt
3582 tmake_file="stormy16/t-stormy16"
3585 tm_file="${tm_file} elfos.h newlib-stdint.h xtensa/elf.h"
3586 extra_options="${extra_options} xtensa/elf.opt"
3589 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
3590 tmake_file="${tmake_file} xtensa/t-xtensa"
3593 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/uclinux.h"
3594 tmake_file="${tmake_file} xtensa/t-xtensa"
3595 extra_options="${extra_options} xtensa/uclinux.opt"
3598 tm_file="mn10300/mn10300.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
3603 tm_file="elfos.h newlib-stdint.h ${tm_file}"
3604 c_target_objs="m32c-pragma.o"
3605 cxx_target_objs="m32c-pragma.o"
3608 echo "*** Configuration ${target} not supported" 1>&2
3614 i[34567]86-*-linux* | x86_64-*-linux*)
3615 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
3617 i[34567]86-*-* | x86_64-*-*)
3618 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
3620 powerpc*-*-* | rs6000-*-*)
3621 tm_file="${tm_file} ${cpu_type}/option-defaults.h"
3627 tmake_file="${tmake_file} t-musl"
3630 tmake_file="${tmake_file} t-uclibc"
3634 # Assume the existence of indirect function support and allow the use of the
3635 # resolver attribute.
3637 *-*-linux*android*|*-*-linux*uclibc*|*-*-linux*musl*)
3639 *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu)
3641 *-*-linux* | *-*-gnu*)
3643 aarch64*-* | arm*-* | i[34567]86-* | powerpc*-* | s390*-* | sparc*-* | x86_64-* | loongarch*-*)
3644 default_gnu_indirect_function=yes
3650 if [ "$target_has_targetcm" = "no" ]; then
3651 c_target_objs="$c_target_objs default-c.o"
3652 cxx_target_objs="$cxx_target_objs default-c.o"
3655 if [ "$common_out_file" = "" ]; then
3656 if [ "$target_has_targetm_common" = "yes" ]; then
3657 common_out_file="$cpu_type/$cpu_type-common.cc"
3659 common_out_file="default-common.cc"
3663 if [ "$target_has_targetdm" = "no" ]; then
3664 d_target_objs="$d_target_objs default-d.o"
3667 if [ "$target_has_targetrustm" = "no" ]; then
3668 rust_target_objs="$rust_target_objs default-rust.o"
3671 # Support for --with-cpu and related options (and a few unrelated options,
3675 echo "--with-cpu must be passed a value" 1>&2
3680 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
3681 # to generic if there is no processor scheduler model for the target.
3684 arch_without_sse2=no
3685 arch_without_64bit=no
3688 if test $fbsd_major -ge 6; then
3694 arch_without_sse2=yes
3695 arch_without_64bit=yes
3700 arch_without_sse2=yes
3701 arch_without_64bit=yes
3706 arch_without_sse2=yes
3707 arch_without_64bit=yes
3712 arch_without_sse2=yes
3713 arch_without_64bit=yes
3716 arch_without_sse2=yes
3717 arch_without_64bit=yes
3718 case ${target_noncanonical} in
3731 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
3741 i686-*-* | i786-*-*)
3742 case ${target_noncanonical} in
3783 amdfam10-*|barcelona-*)
3787 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
3791 k8-*|opteron-*|athlon64-*|athlon_fx-*)
3795 athlon_xp-*|athlon_mp-*|athlon_4-*)
3798 arch_without_sse2=yes
3799 arch_without_64bit=yes
3801 athlon_tbird-*|athlon-*)
3804 arch_without_sse2=yes
3809 arch_without_sse2=yes
3822 arch_without_sse2=yes
3824 pentium3-*|pentium3m-*)
3827 arch_without_sse2=yes
3829 pentium4-*|pentium4m-*)
3868 arch_without_sse2=yes
3873 arch_without_sse2=yes
3874 arch_without_64bit=yes
3879 case ${target_noncanonical} in
3920 amdfam10-*|barcelona-*)
3924 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
3928 k8-*|opteron-*|athlon_64-*)
3968 # If there is no $with_cpu option, try to infer one from ${target}.
3969 # This block sets nothing except for with_cpu.
3970 if test x$with_cpu = x ; then
3972 i[34567]86-*-elfiamcu)
3975 i[34567]86-*-*|x86_64-*-*)
3993 frv-*-*linux* | frv400-*-*linux*)
4000 case "$with_arch" in
4002 with_cpu=${default_cf_cpu}
4005 with_cpu=m${default_m68k_cpu}
4021 with_cpu="`echo ${target} | sed 's/-.*$//'`"
4030 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
4032 i[34567]86-*-*|x86_64-*-*)
4033 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
4034 if test x$with_cpu_32 = x; then
4035 with_cpu_32=$with_cpu
4037 if test x$with_cpu_64 = x; then
4038 with_cpu_64=$with_cpu
4046 # Support for --with-arch and related options (and a few unrelated options,
4048 case ${with_arch} in
4050 echo "--with-arch must be passed a value" 1>&2
4055 # If there is no $with_arch option, try to infer one from ${target}.
4056 # This block sets nothing except for with_arch.
4057 if test x$with_arch = x ; then
4059 i[34567]86-*-darwin*|x86_64-*-darwin*)
4060 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
4061 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
4063 i[34567]86-*-elfiamcu)
4067 # --with-fpmath sets the default ISA to SSE2, which is the same
4068 # ISA supported by Pentium 4.
4069 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
4078 mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
4089 # Avoid overriding --with-arch-32 and --with-arch-64 values.
4091 i[34567]86-*-darwin*|x86_64-*-darwin*)
4092 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
4093 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
4095 i[34567]86-*-*|x86_64-*-*)
4096 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
4097 if test x$with_arch_32 = x; then
4098 with_arch_32=$with_arch
4100 if test x$with_arch_64 = x; then
4101 if test $arch_without_64bit = yes; then
4102 # Set the default 64bit arch to x86-64 if the default arch
4103 # doesn't support 64bit.
4106 with_arch_64=$with_arch
4110 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
4111 # Set the default 64bit arch to x86-64 if the default arch
4112 # doesn't support 64bit and we need 64bit ISA.
4113 with_arch_32=$with_arch
4121 # Infer a default setting for --with-float.
4122 if test x$with_float = x; then
4124 mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
4125 # The R5900 doesn't support 64-bit float. 32-bit float doesn't
4126 # comply with IEEE 754.
4132 # Infer a default setting for --with-fpu.
4133 if test x$with_fpu = x; then
4135 mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
4136 # The R5900 FPU only supports single precision.
4142 # Support --with-fpmath.
4143 if test x$with_fpmath != x; then
4145 i[34567]86-*-* | x86_64-*-*)
4146 case ${with_fpmath} in
4148 tm_file="${tm_file} i386/avxmath.h"
4151 tm_file="${tm_file} i386/ssemath.h"
4154 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
4160 echo "--with-fpmath isn't supported for $target." 1>&2
4166 # Similarly for --with-schedule.
4167 if test x$with_schedule = x; then
4170 # Override default PA8000 scheduling model.
4171 with_schedule=7100LC
4176 # Infer a default setting for --with-llsc.
4177 if test x$with_llsc = x; then
4180 # The kernel emulates LL and SC where necessary.
4183 mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
4184 # The R5900 doesn't support LL(D) and SC(D).
4190 # Validate and mark as valid any --with options supported
4191 # by this target. In order to use a particular --with option
4192 # you must list it in supported_defaults; validating the value
4193 # is optional. This case statement should set nothing besides
4194 # supported_defaults.
4199 supported_defaults="abi cpu cpu_64 arch arch_64 tune tune_64"
4200 if test x$with_cpu_64 != x && test x$with_cpu = x; then
4201 with_cpu=$with_cpu_64
4203 if test x$with_arch_64 != x && test x$with_arch = x; then
4204 with_arch=$with_arch_64
4206 if test x$with_tune_64 != x && test x$with_tune = x; then
4207 with_tune=$with_tune_64
4209 for which in cpu arch tune; do
4210 eval "val=\$with_$which"
4211 base_val=`echo $val | sed -E -e 's/\+.*//'`
4212 ext_val=`echo $val | sed -E -e 's/[a-z0-9.-]+//'`
4214 if [ $which = arch ]; then
4215 def=aarch64-arches.def
4216 pattern=AARCH64_ARCH
4218 def=aarch64-cores.def
4219 pattern=AARCH64_CORE
4222 # Find the base CPU or ARCH id in aarch64-cores.def or
4223 # aarch64-arches.def
4224 if [ x"$base_val" = x ] \
4225 || grep "^$pattern(\"$base_val\"," \
4226 ${srcdir}/config/aarch64/$def \
4229 # Disallow extensions in --with-tune=cortex-a53+crc.
4230 if [ $which = tune ] && [ x"$ext_val" != x ]; then
4231 echo "Architecture extensions not supported in --with-$which=$val" 1>&2
4235 # Use the pre-processor to strip flatten the options.
4236 # This makes the format less rigid than if we use
4237 # grep and sed directly here.
4238 opt_macro="AARCH64_OPT_EXTENSION(A, B, C, D, E, F)=A, B, C, D, E, F"
4239 options_parsed="`$ac_cv_prog_CPP -D"$opt_macro" -x c \
4240 ${srcdir}/config/aarch64/aarch64-option-extensions.def`"
4242 while [ x"$ext_val" != x ]
4244 ext_val=`echo $ext_val | sed -E -e 's/\+//'`
4245 ext=`echo $ext_val | sed -E -e 's/\+.*//'`
4246 base_ext=`echo $ext | sed -E -e 's/^no//'`
4247 opt_line=`echo -e "$options_parsed" | \
4248 grep "^\"$base_ext\""`
4250 if [ x"$base_ext" = x ] \
4251 || [ x"$opt_line" != x ]; then
4254 echo "Unknown extension used in --with-$which=$val" 1>&2
4257 ext_val=`echo $ext_val | sed -E -e 's/[a-z0-9]+//'`
4262 # Allow --with-$which=native.
4263 if [ "$val" = native ]; then
4266 echo "Unknown $which used in --with-$which=$val" 1>&2
4274 supported_defaults="cpu tune"
4275 for which in cpu tune; do
4276 eval "val=\$with_$which"
4279 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
4280 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
4284 echo "Unknown CPU used in --with-$which=$val" 1>&2
4292 supported_defaults="cpu fpu"
4295 if [ x"$with_cpu" = x ] \
4296 || grep -q -E "^ARC_CPU[[:blank:]]*\($with_cpu," \
4297 ${srcdir}/config/arc/arc-cpus.def
4302 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
4306 # see if --with-fpu matches any of the supported FPUs
4311 fpus | fpus_div | fpus_fma | fpus_all)
4315 fpuda | fpuda_div | fpuda_fma | fpuda_all)
4319 fpud | fpud_div | fpud_fma | fpud_all)
4324 echo "Unknown floating point type used in "\
4325 "--with-fpu=$with_fpu" 1>&2
4330 if [ -n "$flags_ok" ] \
4331 && ! grep -q -E "^ARC_CPU[[:blank:]]*\($new_cpu,[[:blank:]]*$flags_ok," \
4332 ${srcdir}/config/arc/arc-cpus.def
4334 echo "Unknown floating point type used in "\
4335 "--with-fpu=$with_fpu for cpu $new_cpu" 1>&2
4341 # Handle --with-multilib-list.
4342 if test "x${with_multilib_list}" != xdefault; then
4343 TM_MULTILIB_CONFIG="${with_multilib_list}"
4348 supported_defaults="cpu endian float"
4352 supported_defaults="arch cpu float tune fpu abi mode tls"
4353 for which in cpu tune arch; do
4354 # See if it matches a supported value
4355 eval "val=\$with_$which"
4356 if [ x"$val" != x ]; then
4357 cpu=`awk -f ${srcdir}/config/arm/parsecpu.awk \
4358 -v cmd="chk$which $val" \
4359 ${srcdir}/config/arm/arm-cpus.in`
4360 if [ "$cpu" = "error" ]; then
4361 echo "Unknown target in --with-$which=$val" 1>&2
4365 eval "target_${which}_cname=$new_val"
4366 echo "For $val real value is $new_val"
4371 case "$with_float" in
4373 | soft | hard | softfp)
4377 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
4382 # see if --with-fpu matches any of the supported FPUs
4383 if [ x"$with_fpu" != x ] ; then
4385 fpu=`awk -f ${srcdir}/config/arm/parsecpu.awk \
4386 -v cmd="chkfpu $val" \
4387 ${srcdir}/config/arm/arm-cpus.in`
4388 if [ "$fpu" = "error" ]
4390 echo "Unknown target in --with-fpu=$val" 1>&2
4397 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
4401 echo "Unknown ABI used in --with-abi=$with_abi"
4406 case "$with_mode" in
4412 echo "Unknown mode used in --with-mode=$with_mode"
4423 echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
4428 if test "x$with_arch" != x && test "x$with_cpu" != x; then
4429 echo "Switch \"--with-arch\" may not be used with switch \"--with-cpu\"" 1>&2
4433 if test "x$with_cpu" != x && test "x$with_tune" != x; then
4434 echo "Switch \"--with-tune\" may not be used with switch \"--with-cpu\"" 1>&2
4438 # Add extra multilibs
4439 if test "x$with_multilib_list" != x; then
4441 arm_multilibs=`echo $with_multilib_list | sed -e 's/,/ /g'`
4442 if test "x${arm_multilibs}" != xdefault ; then
4443 for arm_multilib in ${arm_multilibs}; do
4444 case ${arm_multilib} in
4446 tmake_profile_file="arm/t-multilib"
4447 tm_mlib_file="arm/arm-mlib.h"
4450 ml=`echo "X$arm_multilib" | sed '1s,^X@,,'`
4451 if test -f "${srcdir}/config/arm/${ml}"; then
4452 tmake_file="${tmake_file} arm/${ml}"
4454 echo "Error: ${ml} does not exist in ${srcdir}/config/arm" >&2
4459 echo "Error: --with-multilib-list=${with_multilib_list} not supported." 1>&2
4466 if test "x${tmake_profile_file}" != x ; then
4467 # arm/t-aprofile and arm/t-rmprofile are only
4468 # designed to work without any with-cpu,
4469 # with-arch, with-mode, with-fpu or with-float
4471 if test "x$with_arch" != x \
4472 || test "x$with_cpu" != x \
4473 || test "x$with_float" != x \
4474 || test "x$with_fpu" != x \
4475 || test "x$with_mode" != x ; then
4476 echo "Error: You cannot use any of --with-arch/cpu/fpu/float/mode with --with-multilib-list=${with_multilib_list}" 1>&2
4478 elif test "x$ml" != x ; then
4479 echo "Error: You cannot use builtin multilib profiles along with custom ones" 1>&2
4482 # But pass the default value for float-abi
4483 # through to the multilib selector
4485 tmake_file="${tmake_file} ${tmake_profile_file}"
4486 tm_file="$tm_file $tm_mlib_file"
4487 TM_MULTILIB_CONFIG="$with_multilib_list"
4490 target_cpu_cname=${target_cpu_cname:-arm7tdmi}
4491 with_cpu=${with_cpu:-$target_cpu_cname}
4495 supported_defaults=cpu
4500 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
4506 fido-*-* | m68k*-*-*)
4507 supported_defaults="arch cpu"
4508 case "$with_arch" in
4510 m68k_arch_family="$with_arch"
4513 echo "Invalid --with-arch=$with_arch" 1>&2
4518 # We always have a $with_cpu setting here.
4520 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
4521 m68k_cpu_ident=$with_cpu
4524 m68k_cpu_ident=m68020
4525 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
4528 m68k_cpu_ident=m68020
4529 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
4532 # We need the C identifier rather than the string.
4533 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
4534 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
4535 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
4536 ${srcdir}/config/m68k/m68k-devices.def`
4537 if [ x"$m68k_cpu_ident" = x ] ; then
4538 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
4541 with_cpu="mcpu=$with_cpu"
4547 supported_defaults="arch tune"
4549 for which in arch tune; do
4550 eval "val=\$with_$which"
4552 "" | fiji | gfx900 | gfx906 | gfx908 | gfx90a | gfx1030 | gfx1100)
4556 echo "Unknown cpu used in --with-$which=$val." 1>&2
4561 [ "x$with_arch" = x ] && with_arch=gfx900
4563 case "x${with_multilib_list}" in
4568 TM_MULTILIB_CONFIG=`echo "gfx900,gfx906,gfx908,gfx90a,gfx1030,gfx1100" | sed "s/${with_arch},\?//;s/,$//"`
4571 TM_MULTILIB_CONFIG="${with_multilib_list}"
4577 supported_defaults="arch schedule"
4579 case "$with_arch" in
4580 "" | 1.0 | 1.1 | 2.0)
4584 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
4589 case "$with_schedule" in
4590 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
4594 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
4600 i[34567]86-*-* | x86_64-*-*)
4601 supported_defaults="abi arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
4602 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
4603 eval "val=\$with_$which"
4604 case " $x86_archs " in
4612 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
4621 if test x${val} != x; then
4622 case " $x86_64_archs " in
4624 # Disallow x86-64-v* for --with-cpu=/--with-tune=
4625 case "x$which$val" in
4626 xcpu*x86-64-v*|xtune*x86-64-v*)
4627 echo "Unknown CPU given in --with-$which=$val." 1>&2
4636 # Allow $x86_cpus --with-cpu=/--with-tune=
4639 case " $x86_cpus " in
4644 echo "Unknown CPU given in --with-$which=$val." 1>&2
4650 echo "Unknown CPU given in --with-$which=$val." 1>&2
4663 supported_defaults="abi arch tune riscv_attribute isa_spec"
4666 riscv-* | riscv32*) xlen=32 ;;
4667 riscv64*) xlen=64 ;;
4668 *) echo "Unsupported RISC-V target ${target}" 1>&2; exit 1 ;;
4671 case "${with_isa_spec}" in
4672 ""|default|20191213|201912)
4673 tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_20191213"
4674 with_isa_spec=20191213
4677 tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_2P2"
4680 tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_20190608"
4681 with_isa_spec=20190608
4684 echo "--with-isa-spec only accept 2.2, 20191213, 201912, 20190608 or 201906" 1>&2
4688 case "${with_riscv_attribute}" in
4690 tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=1"
4693 tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=0"
4696 tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=1"
4699 echo "--with-riscv-attribute=${with_riscv_attribute} is not supported. The argument must begin with yes, no or default." 1>&2
4705 # Infer arch from --with-arch, --target, and --with-abi.
4706 case "${with_arch}" in
4707 rv32e* | rv32i* | rv32g* | rv64e* | rv64i* | rv64g*)
4711 # Infer XLEN, but otherwise assume GC.
4712 case "${with_abi}" in
4713 ilp32e) with_arch="rv32e" ;;
4714 ilp32 | ilp32f | ilp32d) with_arch="rv32gc" ;;
4715 lp64 | lp64f | lp64d) with_arch="rv64gc" ;;
4716 lp64e) with_arch="rv64e" ;;
4717 *) with_arch="rv${xlen}gc" ;;
4721 echo "--with-arch=${with_arch} is not supported. The argument must begin with rv32e, rv32i, rv32g, rv64e, rv64i, or rv64g." 1>&2
4725 PYTHON=`which python || which python3 || which python2`
4726 if test "x${PYTHON}" != x; then
4727 with_arch=`${PYTHON} ${srcdir}/config/riscv/arch-canonicalize -misa-spec=${with_isa_spec} ${with_arch}`
4729 tm_defines="${tm_defines} TARGET_RISCV_DEFAULT_ARCH=${with_arch}"
4731 # Make sure --with-abi is valid. If it was not specified,
4732 # pick a default based on the ISA, preferring soft-float
4733 # unless the D extension is present.
4734 case "${with_abi}" in
4735 ilp32 | ilp32e | ilp32f | ilp32d | lp64 | lp64e | lp64f | lp64d)
4738 case "${with_arch}" in
4739 rv32*d* | rv32g*) with_abi=ilp32d ;;
4740 rv32e*) with_abi=ilp32e ;;
4741 rv32*) with_abi=ilp32 ;;
4742 rv64*d* | rv64g*) with_abi=lp64d ;;
4743 rv64e*) with_abi=lp64e ;;
4744 rv64*) with_abi=lp64 ;;
4748 echo "--with-abi=${with_abi} is not supported" 1>&2
4752 tm_defines="${tm_defines} TARGET_RISCV_DEFAULT_ABI=${with_abi}"
4754 # Make sure ABI and ISA are compatible.
4755 case "${with_abi},${with_arch}" in
4756 ilp32,rv32* | ilp32e,rv32e* \
4757 | ilp32f,rv32*f* | ilp32f,rv32g* \
4758 | ilp32d,rv32*d* | ilp32d,rv32g* \
4759 | lp64,rv64* | lp64e,rv64e* \
4760 | lp64f,rv64*f* | lp64f,rv64g* \
4761 | lp64d,rv64*d* | lp64d,rv64g*)
4764 echo "--with-abi=${with_abi} is not supported for ISA ${with_arch}" 1>&2
4768 # Handle --with-multilib-generator.
4769 if test "x${with_multilib_generator}" != xdefault; then
4770 if test "x${with_multilib_list}" != xdefault; then
4771 echo "--with-multilib-list= can't used with --with-multilib-generator= at same time" 1>&2
4776 if ${srcdir}/config/riscv/multilib-generator \
4777 -misa-spec=${with_isa_spec} \
4778 `echo ${with_multilib_generator} | sed 's/;/ /g'`\
4779 > t-multilib-config;
4781 tmake_file="${tmake_file} riscv/t-withmultilib-generator"
4783 echo "invalid option for --with-multilib-generator" 1>&2
4788 echo "--with-multilib-generator= is not supported for ${target}, only supported for riscv*-*-elf*" 1>&2
4794 # Handle --with-multilib-list.
4795 if test "x${with_multilib_list}" != xdefault; then
4796 tmake_file="${tmake_file} riscv/t-withmultilib"
4798 case ${with_multilib_list} in
4799 ilp32 | ilp32f | ilp32d \
4800 | lp64 | lp64f | lp64d )
4801 TM_MULTILIB_CONFIG="${with_arch},${with_multilib_list}"
4804 echo "--with-multilib-list=${with_multilib_list} not supported."
4811 supported_defaults="abi arch arch_32 arch_64 float fpu nan fp_32 odd_spreg_32 tune tune_32 tune_64 divide llsc mips-plt synci lxc1-sxc1 madd4 compact-branches msa"
4813 case ${with_float} in
4818 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
4824 "" | single | double)
4828 echo "Unknown fpu type used in --with-fpu=$with_fpu" 1>&2
4838 echo "Unknown NaN encoding used in --with-nan=$with_nan" 1>&2
4843 case ${with_fp_32} in
4848 echo "Unknown FP mode used in --with-fp-32=$with_fp_32" 1>&2
4853 case ${with_odd_spreg_32} in
4855 with_odd_spreg_32="odd-spreg"
4858 with_odd_spreg_32="no-odd-spreg"
4864 echo "Unknown odd-spreg-32 type used in --with-odd-spreg-32=$with_odd_spreg_32" 1>&2
4870 "" | 32 | o64 | n32 | 64 | eabi)
4874 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
4879 case ${with_divide} in
4880 "" | breaks | traps)
4884 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
4889 case ${with_llsc} in
4900 echo "Unknown llsc type used in --with-llsc" 1>&2
4905 case ${with_mips_plt} in
4910 with_mips_plt=no-plt
4915 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
4920 case ${with_synci} in
4930 echo "Unknown synci type used in --with-synci" 1>&2
4935 case ${with_lxc1_sxc1} in
4937 with_lxc1_sxc1=lxc1-sxc1
4940 with_lxc1_sxc1=no-lxc1-sxc1
4945 echo "Unknown lxc1-sxc1 type used in --with-lxc1-sxc1" 1>&2
4950 case ${with_madd4} in
4960 echo "Unknown madd4 type used in --with-madd4" 1>&2
4965 case ${with_compact_branches} in
4966 "" | never | always | optimal)
4969 echo "Unknown compact-branches policy used in --with-compact-branches" 1>&2
4984 echo "Unknown msa type used in --with-msa" 1>&2
4991 supported_defaults="abi arch tune fpu simd multilib-default strict-align-lib"
4996 arch_pattern arch_default \
4997 fpu_pattern fpu_default \
4998 triplet_os triplet_abi \
5001 # --with-abi is now obsolete, emit a warning if given.
5005 echo "warning: --with-abi= is now obsolete," \
5006 "the default ABI is derived from your target" \
5007 "triplet ${target}" 1>&2
5011 # Infer ABI from the triplet.
5013 loongarch64-*f64) abi_base="lp64d"; abi_ext="base" ;;
5014 loongarch64-*f32) abi_base="lp64f"; abi_ext="base" ;;
5015 loongarch64-*sf) abi_base="lp64s"; abi_ext="base" ;;
5016 loongarch64-*) abi_base="lp64d"; abi_ext="base" ;;
5018 echo "Unsupported target ${target}." 1>&2
5023 # Get the canonical triplet (multiarch specifier).
5024 case ${abi_base},${abi_ext} in
5025 lp64d,base) triplet_abi="";;
5026 lp64f,base) triplet_abi="f32";;
5027 lp64s,base) triplet_abi="sf";;
5031 *-linux-gnu*) triplet_os="linux-gnu";;
5032 *-linux-musl*) triplet_os="linux-musl";;
5033 *-elf*) triplet_os="elf";;
5035 echo "Unsupported target ${target}." 1>&2
5039 la_canonical_triplet="loongarch64-${triplet_os}${triplet_abi}"
5042 # Perform initial sanity checks on --with-* options.
5043 case ${with_arch} in
5044 "" | abi-default | loongarch64 | la[46]64) ;; # OK, append here.
5046 if test x${host} != x${target}; then
5047 echo "--with-arch=native is illegal for cross-compiler." 1>&2
5052 echo "Unknown arch in --with-arch=$with_arch" 1>&2
5059 "" | none | 32 | 64) ;; # OK, append here.
5061 # Convert "0" to "none" for upcoming checks.
5065 echo "Unknown fpu type in --with-fpu=$with_fpu" 1>&2
5070 case ${with_simd} in
5072 lsx | lasx) # OK, append here.
5077 echo "--with-simd=${with_simd} conflicts with --with-fpu=${with_fpu}" 1>&2
5084 echo "Unknown SIMD extension in --with-simd=$with_simd" 1>&2
5089 # Infer ISA-related default options from the ABI: pass 1
5090 case ${abi_base}/${abi_ext} in
5092 # architectures that support lp64* ABI
5093 arch_pattern="native|abi-default|loongarch64|la[46]64"
5094 # default architecture for lp64* ABI
5095 arch_default="abi-default"
5098 echo "Unsupported ABI type ${abi_base}/${abi_ext}." 1>&2
5103 # Infer ISA-related default options from the ABI: pass 2
5104 case ${abi_base}/${abi_ext} in
5113 fpu_pattern="none|32|64"
5117 echo "Unsupported ABI type ${abi_base}/${abi_ext}." 1>&2
5122 ## Set default value for with_arch.
5123 case ${with_arch} in
5125 if test x${arch_default} != x; then
5126 with_arch=${arch_default}
5128 with_arch=${arch_pattern}
5133 if echo "${with_arch}" | grep -E "^${arch_pattern}$" > /dev/null; then
5136 echo "${abi_base}/${abi_ext} ABI cannot be implemented with" \
5137 "--with-arch=${with_arch}." 1>&2
5143 ## Set default value for with_fpu.
5146 if test x${fpu_default} != x; then
5147 with_fpu=${fpu_default}
5149 with_fpu=${fpu_pattern}
5154 if echo "${with_fpu}" | grep -E "^${fpu_pattern}$" > /dev/null; then
5157 echo "${abi_base}/${abi_ext} ABI cannot be implemented with" \
5158 "--with-fpu=${with_fpu}." 1>&2
5165 # Check default with_tune configuration using with_arch.
5166 case ${with_arch} in
5168 tune_pattern="native|abi-default|loongarch64|la[46]64"
5171 # By default, $with_tune == $with_arch
5176 case ${with_tune} in
5179 if echo "${with_tune}" | grep -E "^${tune_pattern}$" > /dev/null; then
5182 echo "Incompatible options: --with-tune=${with_tune}" \
5183 "and --with-arch=${with_arch}." 1>&2
5189 # Build libraries with -mstrict-align if --with-strict-align-lib is given.
5190 case ${with_strict_align_lib} in
5191 yes) strict_align_opt="/mstrict-align" ;;
5194 echo "Unknown option: --with-strict-align-lib=${with_strict_align_lib}" 1>&2
5200 # Handle --with-multilib-default
5201 if echo "${with_multilib_default}" \
5202 | grep -E -e '[[:space:]]' -e '//' -e '/$' -e '^/' > /dev/null 2>&1; then
5203 echo "Invalid argument to --with-multilib-default." 1>&2
5207 if test x${with_multilib_default} = x; then
5208 # Use -march=abi-default by default when building libraries.
5209 with_multilib_default="/march=abi-default"
5211 unset parse_state component
5213 for component in $(echo "${with_multilib_default}" | tr '/' ' '); do
5214 case ${parse_state},${component} in
5215 arch,|arch,abi-default)
5216 # ABI-default: use the ABI's default ARCH configuration for
5217 # multilib library builds, unless otherwise specified
5218 # in --with-multilib-list.
5219 with_multilib_default="/march=abi-default" ;;
5221 # Fixed: use the default gcc configuration for all multilib
5222 # builds by default.
5223 with_multilib_default="" ;;
5224 arch,native|arch,loongarch64|arch,la[46]64) # OK, append here.
5225 with_multilib_default="/march=${component}" ;;
5227 with_multilib_default="/march=abi-default"
5228 with_multilib_default="${with_multilib_default}/${component}" ;;
5230 with_multilib_default="${with_multilib_default}/${component}" ;;
5233 if test x${parse_state} = xarch; then
5237 unset parse_state component
5240 # Handle --with-multilib-list.
5241 if test x"${with_multilib_list}" = x \
5242 || test x"${with_multilib_list}" = xno \
5243 || test x"${with_multilib_list}" = xdefault \
5244 || test x"${enable_multilib}" != xyes; then
5246 with_multilib_list="${abi_base}/${abi_ext}"
5249 # Check if the configured default ABI combination is included in
5250 # ${with_multilib_list}.
5251 loongarch_multilib_list_sane=no
5253 # This one goes to TM_MULTILIB_CONFIG, for use in t-linux.
5254 loongarch_multilib_list_make="${abi_base},"
5256 # This one goes to tm_defines, for use in loongarch-driver.c.
5257 loongarch_multilib_list_c=""
5259 # ${with_multilib_list} should not contain whitespaces,
5260 # consecutive commas or slashes.
5261 if echo "${with_multilib_list}" \
5262 | grep -E -e "[[:space:]]" -e '[,/][,/]' -e '[,/]$' -e '^[,/]' > /dev/null 2>&1; then
5263 echo "Invalid argument to --with-multilib-list." 1>&2
5267 unset component elem_abi_base elem_abi_ext elem_tmp parse_state all_abis
5268 for elem in $(echo "${with_multilib_list}" | tr ',' ' '); do
5269 unset elem_abi_base elem_abi_ext
5270 parse_state="abi-base"
5272 for component in $(echo "${elem}" | tr '/' ' '); do
5273 if test x${parse_state} = x"abi-base"; then
5275 case ${component} in
5276 lp64d | lp64f | lp64s) elem_tmp="ABI_BASE_$(echo ${component} | tr a-z A-Z),";;
5278 echo "Unknown base ABI \"${component}\" in --with-multilib-list." 1>&2
5282 loongarch_multilib_list_c="${loongarch_multilib_list_c}${elem_tmp}"
5283 loongarch_multilib_list_make="${loongarch_multilib_list_make}mabi=${component}"
5284 elem_abi_base="${component}"
5286 parse_state="abi-ext"
5290 if test x${parse_state} = x"abi-ext"; then
5291 # ABI extension type
5292 case ${component} in
5295 loongarch_multilib_list_c="${loongarch_multilib_list_c}ABI_EXT_BASE,"
5296 loongarch_multilib_list_make="${loongarch_multilib_list_make}" # Add nothing for now.
5302 # The default ABI extension is "base" if unspecified.
5304 loongarch_multilib_list_c="${loongarch_multilib_list_c}ABI_EXT_BASE,"
5305 loongarch_multilib_list_make="${loongarch_multilib_list_make}" # Add nothing for now.
5309 if test x${parse_state} = x"arch"; then
5311 case ${component} in
5312 native | abi-default | loongarch64 | la[46]64) # OK, append here.
5313 # Append -march spec for each multilib variant.
5314 loongarch_multilib_list_make="${loongarch_multilib_list_make}/march=${component}"
5320 # "/default" is equivalent to --with-multilib-default=fixed
5326 # If ARCH is unspecified for this multilib variant, use ${with_multllib_default}.
5327 loongarch_multilib_list_make="${loongarch_multilib_list_make}${with_multilib_default}"
5331 if test x${parse_state} = x"opts"; then
5332 # Other compiler options for building libraries.
5333 # (no static sanity check performed)
5334 case ${component} in
5336 # Append other components as additional build options
5337 # (without the prepending dash).
5338 # Their validity should be examined by the compiler.
5339 loongarch_multilib_list_make="${loongarch_multilib_list_make}/${component}"
5345 case ${parse_state} in
5348 loongarch_multilib_list_c="${loongarch_multilib_list_c}ABI_EXT_BASE,"
5349 loongarch_multilib_list_make="${loongarch_multilib_list_make}" # Add nothing for now.
5350 loongarch_multilib_list_make="${loongarch_multilib_list_make}${with_multilib_default}"
5353 # If ARCH is unspecified for this multilib variant, use ${with_multllib_default}.
5354 loongarch_multilib_list_make="${loongarch_multilib_list_make}${with_multilib_default}"
5361 # Use mstrict-align for building libraries if --with-strict-align-lib is given.
5362 loongarch_multilib_list_make="${loongarch_multilib_list_make}${strict_align_opt}"
5364 # Check for repeated configuration of the same multilib variant.
5365 if echo "${elem_abi_base}/${elem_abi_ext}" \
5366 | grep -E "^(${all_abis%|})$" >/dev/null 2>&1; then
5367 echo "Repeated multilib config of \"${elem_abi_base}/${elem_abi_ext}\" in --with-multilib-list."
5370 all_abis="${all_abis}${elem_abi_base}/${elem_abi_ext}|"
5373 # Check if the default ABI configuration of the GCC binary
5374 # is included in the enabled multilib variants.
5375 if test x${elem_abi_base} = x${abi_base} \
5376 && test x${elem_abi_ext} = x${abi_ext}; then
5377 loongarch_multilib_list_sane=yes
5379 loongarch_multilib_list_make="${loongarch_multilib_list_make},"
5381 unset component elem_abi_base elem_abi_ext elem_tmp parse_state all_abis
5384 # Check if the default ABI combination is in the default list.
5385 if test x${loongarch_multilib_list_sane} = xno; then
5386 if test x${abi_ext} = xbase; then
5389 abi_ext="/${abi_ext}"
5392 echo "Default ABI combination (${abi_base}${abi_ext})" \
5393 "not found in --with-multilib-list." 1>&2
5397 # Remove the excessive appending comma.
5398 loongarch_multilib_list_c=${loongarch_multilib_list_c%,}
5399 loongarch_multilib_list_make=${loongarch_multilib_list_make%,}
5403 supported_defaults="arch cpu nds32_lib float fpu_config"
5405 # process --with-arch
5406 case "${with_arch}" in
5408 tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=0"
5412 tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=0"
5415 tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=1"
5418 tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=2"
5422 echo "Cannot accept --with-arch=$with_arch, available values are: v2 v2j v3 v3m v3f v3s" 1>&2
5427 case "${with_cpu}" in
5431 n6 | n7 |n8 | e8 | s8 | n9 | n10 | d10 | n12 | n13 | n15)
5435 echo "Cannot accept --with-cpu=$with_cpu, available values are: n6 n7 n8 e8 s8 n9 n10 d10 n12 n13 n15" 1>&2
5440 # process --with-nds32-lib
5441 case "${with_nds32_lib}" in
5445 with_nds32_lib=ulibc
5448 with_nds32_lib=glibc
5451 with_nds32_lib=newlib
5452 tm_defines="${tm_defines} TARGET_DEFAULT_CTOR_DTOR=1"
5458 tm_defines="${tm_defines} TARGET_DEFAULT_CTOR_DTOR=1"
5462 # for the arch=v3f or arch=v3s under mculib toolchain,
5463 # we would like to set -fno-math-errno as default
5464 case "${with_arch}" in
5466 tm_defines="${tm_defines} TARGET_DEFAULT_NO_MATH_ERRNO=1"
5474 echo "Cannot accept --with-nds32-lib=$with_nds32_lib, available values are: newlib mculib glibc uclibc" 1>&2
5479 # process --with-float
5480 case "${with_float}" in
5485 echo "Cannot accept --with-float=$with_float, available values are: soft hard" 1>&2
5490 # process --with-config-fpu
5491 case "${with_config_fpu}" in
5496 echo "Cannot accept --with-config-fpu=$with_config_fpu, available values from 0 to 7" 1>&2
5504 supported_defaults="arch"
5505 case "$with_arch" in
5510 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
5517 supported_defaults=arch
5518 TM_MULTILIB_CONFIG=$with_arch
5519 #TODO 'sm_[...]' list per 'nvptx-sm.def'.
5524 sm_35 | sm_53 | sm_70 | sm_75 | sm_80 )
5525 # OK, but we'd like 'sm_30', too.
5526 TM_MULTILIB_CONFIG="$TM_MULTILIB_CONFIG sm_30"
5529 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
5535 powerpc*-*-* | rs6000-*-*)
5536 supported_defaults="abi cpu cpu_32 cpu_64 float tune tune_32 tune_64 advance_toolchain"
5538 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
5539 eval "val=\$with_$which"
5541 default32 | default64)
5546 echo "$val only valid for --with-cpu and --with-tune." 1>&2
5550 with_which="with_$which"
5554 tm_defines="${tm_defines} CONFIG_PPC405CR"
5555 eval "with_$which=405"
5557 "" | common | native \
5558 | power[3456789] | power10 | power5+ | power6x \
5559 | powerpc | powerpc64 | powerpc64le \
5561 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
5562 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
5563 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
5564 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | e5500 | e6500 \
5565 | titan | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
5569 echo "Unknown cpu used in --with-$which=$val." 1>&2
5576 "" | elfv1 | elfv2 )
5580 echo "Unknown ABI used in --with-abi=$with_abi"
5585 if test "x$with_advance_toolchain" != x; then
5586 if test -d "/opt/$with_advance_toolchain/." -a \
5587 -d "/opt/$with_advance_toolchain/bin/." -a \
5588 -d "/opt/$with_advance_toolchain/include/."; then
5590 tm_file="$tm_file ./advance-toolchain.h"
5591 (at="/opt/$with_advance_toolchain"
5592 echo "/* Use Advance Toolchain $at */"
5594 echo "#undef LINK_OS_NEW_DTAGS_SPEC"
5595 echo "#define LINK_OS_NEW_DTAGS_SPEC" \
5596 "\"--enable-new-dtags\""
5598 echo "#undef DYNAMIC_LINKER_PREFIX"
5599 echo "#define DYNAMIC_LINKER_PREFIX \"$at\""
5601 echo "#undef MD_EXEC_PREFIX"
5602 echo "#define MD_EXEC_PREFIX \"$at/bin/\""
5604 echo "#undef MD_STARTFILE_PREFIX"
5605 echo "#define MD_STARTFILE_PREFIX \"$prefix/lib/\""
5607 echo "#undef MD_STARTFILE_PREFIX_1"
5608 echo "#define MD_STARTFILE_PREFIX_1 \"$at/lib/\"") \
5609 > advance-toolchain.h
5611 echo "Unknown advance-toolchain $with_advance_toolchain"
5616 # Set up the default long double format if the user changed it.
5617 if test x$with_long_double_format = xieee; then
5618 tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=1"
5620 elif test x$with_long_double_format = xibm; then
5621 tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=0"
5626 supported_defaults="arch mode tune"
5628 for which in arch tune; do
5629 eval "val=\$with_$which"
5631 "" | native | z900 | z990 | z9-109 | z9-ec | z10 | z196 | zEC12 | z13 | z14 | z15 | z16 | arch5 | arch6 | arch7 | arch8 | arch9 | arch10 | arch11 | arch12 | arch13 | arch14 )
5635 echo "Unknown cpu used in --with-$which=$val." 1>&2
5641 case ${with_mode} in
5646 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
5652 sh[123456ble]*-*-* | sh-*-*)
5653 supported_defaults="cpu"
5654 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
5655 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
5658 m2a | m2a-single | m2a-single-only | m2a-nofpu)
5660 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
5663 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
5664 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
5665 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
5666 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
5672 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
5674 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
5675 eval "val=\$with_$which"
5677 "" | sparc | sparcv9 | sparc64 \
5679 | v8 | supersparc | hypersparc | leon | leon3 | leon3v7 \
5680 | sparclite | f930 | f934 | sparclite86x \
5681 | sparclet | tsc701 \
5682 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \
5683 | niagara3 | niagara4 | niagara7 | m8)
5687 echo "Unknown cpu used in --with-$which=$val" 1>&2
5693 case ${with_float} in
5698 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
5705 supported_defaults="arch"
5707 case ${with_arch} in
5708 "" | c62x | c64x | c64x+ | c67x | c67x+ | c674x)
5712 echo "Unknown arch used in --with-arch=$with_arch." 1>&2
5719 supported_defaults=cpu
5721 "" | v850e | v850e1 | v850e2 | v850es | v850e2v3 | v850e3v5)
5725 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
5731 supported_defaults="cpu"
5735 *) echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
5742 # VxWorks support for shared libraries has to be requested explicitly,
5743 # so we can factor this part here:
5745 case "${target}-${enable_shared}" in
5747 tmake_file="${tmake_file} t-slibgcc"
5751 # Targets for which there is at least one VxWorks port should include
5752 # vxworks-dummy.h to allow safe references to various TARGET_VXWORKS kinds
5753 # of markers from other files in the port, including the vxworks*.h files to
5754 # distinguish VxWorks variants such as VxWorks 7 or 64).
5757 arm*-*-* | i[34567]86-*-* | mips*-*-* | powerpc*-*-* | sh*-*-* \
5758 | sparc*-*-* | x86_64-*-*)
5759 tm_file="vxworks-dummy.h ${tm_file}"
5763 # Set some miscellaneous flags for particular targets.
5764 target_cpu_default2=
5767 if test x"$target_cpu_cname" != x
5769 target_cpu_default2=$target_cpu_cname
5774 if test x$with_cpu = x
5776 echo "Don't know the target cpu" 1>&2
5779 target_cpu_default2="\\\"$with_cpu\\\""
5784 if test x$gas = xyes
5786 target_cpu_default2="MASK_GAS"
5790 fido*-*-* | m68k*-*-*)
5791 target_cpu_default2=$m68k_cpu_ident
5792 tmake_file="m68k/t-opts $tmake_file"
5793 if [ x"$m68k_arch_family" != x ]; then
5794 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
5798 i[34567]86-*-darwin* | x86_64-*-darwin*)
5800 i[34567]86-*-linux* | x86_64-*-linux*)
5801 extra_objs="${extra_objs} gnu-property.o"
5802 tmake_file="$tmake_file i386/t-linux i386/t-gnu-property"
5804 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
5805 tmake_file="$tmake_file i386/t-kfreebsd"
5808 tmake_file="$tmake_file i386/t-gnu"
5810 i[34567]86-*-msdosdjgpp*)
5811 tmake_file="${tmake_file} i386/t-djgpp"
5813 i[34567]86-*-solaris2* | x86_64-*-solaris2*)
5815 i[34567]86-*-cygwin* | x86_64-*-cygwin*)
5817 i[34567]86-*-mingw* | x86_64-*-mingw*)
5819 i[34567]86-*-dragonfly* | x86_64-*-dragonfly*)
5821 i[34567]86-*-freebsd*)
5824 tmake_file="${tmake_file} i386/t-freebsd64"
5830 if test x$gnu_ld = xyes
5832 target_cpu_default2="MASK_SPLIT_ADDRESSES"
5836 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
5839 if test x$with_arch != x; then
5840 default_mips_arch=$with_arch
5842 with_arch=$default_mips_arch
5844 if test x$with_abi != x; then
5845 default_mips_abi=$with_abi
5847 case ${default_mips_arch} in
5848 mips1) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS1" ;;
5849 mips2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS2" ;;
5850 mips3) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3" ;;
5851 mips4) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS4" ;;
5852 mips32) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32" ;;
5853 mips32r2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2" ;;
5854 mips32r6) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6" ;;
5855 mips64) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64" ;;
5856 mips64r2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2" ;;
5857 mips64r6) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6" ;;
5859 case ${default_mips_abi} in
5860 32) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_32" ;;
5861 o64) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_O64" ;;
5862 n32) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_N32" ;;
5863 64) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_64" ;;
5864 eabi) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_EABI" ;;
5866 tmake_file="mips/t-mips $tmake_file"
5870 # Export canonical triplet.
5871 tm_defines="${tm_defines} LA_MULTIARCH_TRIPLET=${la_canonical_triplet}"
5873 # Define macro LA_DISABLE_MULTILIB if --disable-multilib
5874 tm_defines="${tm_defines} TM_MULTILIB_LIST=${loongarch_multilib_list_c}"
5875 if test x$enable_multilib = xyes; then
5876 TM_MULTILIB_CONFIG="${loongarch_multilib_list_make}"
5878 tm_defines="${tm_defines} LA_DISABLE_MULTILIB"
5881 # Let --with- flags initialize the enum variables from loongarch.opt.
5882 # See macro definitions from loongarch-opts.h and loongarch-cpu.h.
5885 tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_$(echo ${with_arch} | tr a-z- A-Z_)"
5888 tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_$(echo ${abi_base} | tr a-z- A-Z_)"
5892 base) tm_defines="${tm_defines} DEFAULT_ABI_EXT=ABI_EXT_BASE" ;;
5896 if test x${with_tune} != x; then
5897 tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_$(echo ${with_tune} | tr a-z- A-Z_)"
5902 none) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_NONE" ;;
5903 32) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_FPU32" ;;
5904 64) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_FPU64" ;;
5908 case ${with_simd} in
5909 none) tm_defines="$tm_defines DEFAULT_ISA_EXT_SIMD=ISA_EXT_NONE" ;;
5910 lsx) tm_defines="$tm_defines DEFAULT_ISA_EXT_SIMD=ISA_EXT_SIMD_LSX" ;;
5911 lasx) tm_defines="$tm_defines DEFAULT_ISA_EXT_SIMD=ISA_EXT_SIMD_LASX" ;;
5914 tmake_file="loongarch/t-loongarch $tmake_file"
5917 powerpc*-*-* | rs6000-*-*)
5918 # FIXME: The PowerPC port uses the value set at compile time,
5919 # although it's only cosmetic.
5920 if test "x$with_cpu" != x
5922 target_cpu_default2="\\\"$with_cpu\\\""
5924 out_file="${cpu_type}/${cpu_type}.cc"
5925 c_target_objs="${c_target_objs} ${cpu_type}-c.o"
5926 cxx_target_objs="${cxx_target_objs} ${cpu_type}-c.o"
5927 d_target_objs="${d_target_objs} ${cpu_type}-d.o"
5928 tmake_file="${cpu_type}/t-${cpu_type} ${tmake_file}"
5931 sh[123456ble]*-*-* | sh-*-*)
5932 c_target_objs="${c_target_objs} sh-c.o"
5933 cxx_target_objs="${cxx_target_objs} sh-c.o"
5937 # Some standard aliases.
5942 xsparcv9 | xsparc64)
5947 if test x$with_tune = x ; then
5958 # The SPARC port checks this value at compile-time.
5959 target_cpu_default2="TARGET_CPU_$with_cpu"
5963 case "x$with_cpu" in
5966 xv850e | xv850e1 | xv850e2 | xv850e2v3 | xv850e3v5)
5967 target_cpu_default2="TARGET_CPU_$with_cpu"
5970 target_cpu_default2="TARGET_CPU_v850e1"
5975 target_cpu_default2="TARGET_CPU_$with_cpu"
5978 tmake_file="$tmake_file i386/t-gnu64"
5983 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu nan fp_32 odd_spreg_32 divide llsc mips-plt synci tls lxc1-sxc1 madd4 isa_spec compact-branches msa"
5984 for option in $all_defaults
5986 eval "val=\$with_"`echo $option | sed s/-/_/g`
5987 if test -n "$val"; then
5988 case " $supported_defaults " in
5992 echo "This target does not support --with-$option." 2>&1
5993 echo "Valid --with options are: $supported_defaults" 2>&1
6000 t="{ \"$option\", \"$val\" }"
6002 t="${t}, { \"$option\", \"$val\" }"
6009 configure_default_options="{ { NULL, NULL} }"
6011 configure_default_options="{ ${t} }"
6014 if test "$target_cpu_default2" != ""
6016 if test "$target_cpu_default" != ""
6018 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
6020 target_cpu_default=$target_cpu_default2
6025 i[34567]86-*-* | x86_64-*-*)
6026 if test x$enable_as_accelerator = xyes; then
6027 extra_programs="mkoffload\$(exeext)"