* ipa-prop.c (try_make_edge_direct_virtual_call): Remove overactive

[official-gcc.git] / libgo / go / testing / testing.go

// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

// Package testing provides support for automated testing of Go packages.
// It is intended to be used in concert with the ``go test'' command, which automates
// execution of any function of the form
//     func TestXxx(*testing.T)
// where Xxx can be any alphanumeric string (but the first letter must not be in
// [a-z]) and serves to identify the test routine.
//
// Within these functions, use the Error, Fail or related methods to signal failure.
//
// To write a new test suite, create a file whose name ends _test.go that
// contains the TestXxx functions as described here. Put the file in the same
// package as the one being tested. The file will be excluded from regular
// package builds but will be included when the ``go test'' command is run.
// For more detail, run ``go help test'' and ``go help testflag''.
//
// Tests and benchmarks may be skipped if not applicable with a call to
// the Skip method of *T and *B:
//     func TestTimeConsuming(t *testing.T) {
//         if testing.Short() {
//             t.Skip("skipping test in short mode.")
//         }
//         ...
//     }
//
// Benchmarks
//
// Functions of the form
//     func BenchmarkXxx(*testing.B)
// are considered benchmarks, and are executed by the "go test" command when
// its -bench flag is provided. Benchmarks are run sequentially.
//
// For a description of the testing flags, see
// http://golang.org/cmd/go/#hdr-Description_of_testing_flags.
//
// A sample benchmark function looks like this:
//     func BenchmarkHello(b *testing.B) {
//         for i := 0; i < b.N; i++ {
//             fmt.Sprintf("hello")
//         }
//     }
//
// The benchmark function must run the target code b.N times.
// The benchmark package will vary b.N until the benchmark function lasts
// long enough to be timed reliably.  The output
//     BenchmarkHello    10000000    282 ns/op
// means that the loop ran 10000000 times at a speed of 282 ns per loop.
//
// If a benchmark needs some expensive setup before running, the timer
// may be reset:
//
//     func BenchmarkBigLen(b *testing.B) {
//         big := NewBig()
//         b.ResetTimer()
//         for i := 0; i < b.N; i++ {
//             big.Len()
//         }
//     }
//
// If a benchmark needs to test performance in a parallel setting, it may use
// the RunParallel helper function; such benchmarks are intended to be used with
// the go test -cpu flag:
//
//     func BenchmarkTemplateParallel(b *testing.B) {
//         templ := template.Must(template.New("test").Parse("Hello, {{.}}!"))
//         b.RunParallel(func(pb *testing.PB) {
//             var buf bytes.Buffer
//             for pb.Next() {
//                 buf.Reset()
//                 templ.Execute(&buf, "World")
//             }
//         })
//     }
//
// Examples
//
// The package also runs and verifies example code. Example functions may
// include a concluding line comment that begins with "Output:" and is compared with
// the standard output of the function when the tests are run. (The comparison
// ignores leading and trailing space.) These are examples of an example:
//
//     func ExampleHello() {
//             fmt.Println("hello")
//             // Output: hello
//     }
//
//     func ExampleSalutations() {
//             fmt.Println("hello, and")
//             fmt.Println("goodbye")
//             // Output:
//             // hello, and
//             // goodbye
//     }
//
// Example functions without output comments are compiled but not executed.
//
// The naming convention to declare examples for the package, a function F, a type T and
// method M on type T are:
//
//     func Example() { ... }
//     func ExampleF() { ... }
//     func ExampleT() { ... }
//     func ExampleT_M() { ... }
//
// Multiple example functions for a package/type/function/method may be provided by
// appending a distinct suffix to the name. The suffix must start with a
// lower-case letter.
//
//     func Example_suffix() { ... }
//     func ExampleF_suffix() { ... }
//     func ExampleT_suffix() { ... }
//     func ExampleT_M_suffix() { ... }
//
// The entire test file is presented as the example when it contains a single
// example function, at least one other function, type, variable, or constant
// declaration, and no test or benchmark functions.
package testing

import (
        "bytes"
        "flag"
        "fmt"
        "os"
        "runtime"
        "runtime/pprof"
        "strconv"
        "strings"
        "sync"
        "time"
)

var (
        // The short flag requests that tests run more quickly, but its functionality
        // is provided by test writers themselves.  The testing package is just its
        // home.  The all.bash installation script sets it to make installation more
        // efficient, but by default the flag is off so a plain "go test" will do a
        // full test of the package.
        short = flag.Bool("test.short", false, "run smaller test suite to save time")

        // The directory in which to create profile files and the like. When run from
        // "go test", the binary always runs in the source directory for the package;
        // this flag lets "go test" tell the binary to write the files in the directory where
        // the "go test" command is run.
        outputDir = flag.String("test.outputdir", "", "directory in which to write profiles")

        // Report as tests are run; default is silent for success.
        chatty           = flag.Bool("test.v", false, "verbose: print additional output")
        coverProfile     = flag.String("test.coverprofile", "", "write a coverage profile to the named file after execution")
        match            = flag.String("test.run", "", "regular expression to select tests and examples to run")
        memProfile       = flag.String("test.memprofile", "", "write a memory profile to the named file after execution")
        memProfileRate   = flag.Int("test.memprofilerate", 0, "if >=0, sets runtime.MemProfileRate")
        cpuProfile       = flag.String("test.cpuprofile", "", "write a cpu profile to the named file during execution")
        blockProfile     = flag.String("test.blockprofile", "", "write a goroutine blocking profile to the named file after execution")
        blockProfileRate = flag.Int("test.blockprofilerate", 1, "if >= 0, calls runtime.SetBlockProfileRate()")
        timeout          = flag.Duration("test.timeout", 0, "if positive, sets an aggregate time limit for all tests")
        cpuListStr       = flag.String("test.cpu", "", "comma-separated list of number of CPUs to use for each test")
        parallel         = flag.Int("test.parallel", runtime.GOMAXPROCS(0), "maximum test parallelism")

        haveExamples bool // are there examples?

        cpuList []int
)

// common holds the elements common between T and B and
// captures common methods such as Errorf.
type common struct {
        mu       sync.RWMutex // guards output and failed
        output   []byte       // Output generated by test or benchmark.
        failed   bool         // Test or benchmark has failed.
        skipped  bool         // Test of benchmark has been skipped.
        finished bool

        start    time.Time // Time test or benchmark started
        duration time.Duration
        self     interface{}      // To be sent on signal channel when done.
        signal   chan interface{} // Output for serial tests.
}

// Short reports whether the -test.short flag is set.
func Short() bool {
        return *short
}

// Verbose reports whether the -test.v flag is set.
func Verbose() bool {
        return *chatty
}

// decorate prefixes the string with the file and line of the call site
// and inserts the final newline if needed and indentation tabs for formatting.
func decorate(s string) string {
        _, file, line, ok := runtime.Caller(3) // decorate + log + public function.
        if ok {
                // Truncate file name at last file name separator.
                if index := strings.LastIndex(file, "/"); index >= 0 {
                        file = file[index+1:]
                } else if index = strings.LastIndex(file, "\\"); index >= 0 {
                        file = file[index+1:]
                }
        } else {
                file = "???"
                line = 1
        }
        buf := new(bytes.Buffer)
        // Every line is indented at least one tab.
        buf.WriteByte('\t')
        fmt.Fprintf(buf, "%s:%d: ", file, line)
        lines := strings.Split(s, "\n")
        if l := len(lines); l > 1 && lines[l-1] == "" {
                lines = lines[:l-1]
        }
        for i, line := range lines {
                if i > 0 {
                        // Second and subsequent lines are indented an extra tab.
                        buf.WriteString("\n\t\t")
                }
                buf.WriteString(line)
        }
        buf.WriteByte('\n')
        return buf.String()
}

// TB is the interface common to T and B.
type TB interface {
        Error(args ...interface{})
        Errorf(format string, args ...interface{})
        Fail()
        FailNow()
        Failed() bool
        Fatal(args ...interface{})
        Fatalf(format string, args ...interface{})
        Log(args ...interface{})
        Logf(format string, args ...interface{})
        Skip(args ...interface{})
        SkipNow()
        Skipf(format string, args ...interface{})
        Skipped() bool

        // A private method to prevent users implementing the
        // interface and so future additions to it will not
        // violate Go 1 compatibility.
        private()
}

var _ TB = (*T)(nil)
var _ TB = (*B)(nil)

// T is a type passed to Test functions to manage test state and support formatted test logs.
// Logs are accumulated during execution and dumped to standard error when done.
type T struct {
        common
        name          string    // Name of test.
        startParallel chan bool // Parallel tests will wait on this.
}

func (c *common) private() {}

// Fail marks the function as having failed but continues execution.
func (c *common) Fail() {
        c.mu.Lock()
        defer c.mu.Unlock()
        c.failed = true
}

// Failed reports whether the function has failed.
func (c *common) Failed() bool {
        c.mu.RLock()
        defer c.mu.RUnlock()
        return c.failed
}

// FailNow marks the function as having failed and stops its execution.
// Execution will continue at the next test or benchmark.
// FailNow must be called from the goroutine running the
// test or benchmark function, not from other goroutines
// created during the test. Calling FailNow does not stop
// those other goroutines.
func (c *common) FailNow() {
        c.Fail()

        // Calling runtime.Goexit will exit the goroutine, which
        // will run the deferred functions in this goroutine,
        // which will eventually run the deferred lines in tRunner,
        // which will signal to the test loop that this test is done.
        //
        // A previous version of this code said:
        //
        //      c.duration = ...
        //      c.signal <- c.self
        //      runtime.Goexit()
        //
        // This previous version duplicated code (those lines are in
        // tRunner no matter what), but worse the goroutine teardown
        // implicit in runtime.Goexit was not guaranteed to complete
        // before the test exited.  If a test deferred an important cleanup
        // function (like removing temporary files), there was no guarantee
        // it would run on a test failure.  Because we send on c.signal during
        // a top-of-stack deferred function now, we know that the send
        // only happens after any other stacked defers have completed.
        c.finished = true
        runtime.Goexit()
}

// log generates the output. It's always at the same stack depth.
func (c *common) log(s string) {
        c.mu.Lock()
        defer c.mu.Unlock()
        c.output = append(c.output, decorate(s)...)
}

// Log formats its arguments using default formatting, analogous to Println,
// and records the text in the error log. The text will be printed only if
// the test fails or the -test.v flag is set.
func (c *common) Log(args ...interface{}) { c.log(fmt.Sprintln(args...)) }

// Logf formats its arguments according to the format, analogous to Printf,
// and records the text in the error log. The text will be printed only if
// the test fails or the -test.v flag is set.
func (c *common) Logf(format string, args ...interface{}) { c.log(fmt.Sprintf(format, args...)) }

// Error is equivalent to Log followed by Fail.
func (c *common) Error(args ...interface{}) {
        c.log(fmt.Sprintln(args...))
        c.Fail()
}

// Errorf is equivalent to Logf followed by Fail.
func (c *common) Errorf(format string, args ...interface{}) {
        c.log(fmt.Sprintf(format, args...))
        c.Fail()
}

// Fatal is equivalent to Log followed by FailNow.
func (c *common) Fatal(args ...interface{}) {
        c.log(fmt.Sprintln(args...))
        c.FailNow()
}

// Fatalf is equivalent to Logf followed by FailNow.
func (c *common) Fatalf(format string, args ...interface{}) {
        c.log(fmt.Sprintf(format, args...))
        c.FailNow()
}

// Skip is equivalent to Log followed by SkipNow.
func (c *common) Skip(args ...interface{}) {
        c.log(fmt.Sprintln(args...))
        c.SkipNow()
}

// Skipf is equivalent to Logf followed by SkipNow.
func (c *common) Skipf(format string, args ...interface{}) {
        c.log(fmt.Sprintf(format, args...))
        c.SkipNow()
}

// SkipNow marks the test as having been skipped and stops its execution.
// Execution will continue at the next test or benchmark. See also FailNow.
// SkipNow must be called from the goroutine running the test, not from
// other goroutines created during the test. Calling SkipNow does not stop
// those other goroutines.
func (c *common) SkipNow() {
        c.skip()
        c.finished = true
        runtime.Goexit()
}

func (c *common) skip() {
        c.mu.Lock()
        defer c.mu.Unlock()
        c.skipped = true
}

// Skipped reports whether the test was skipped.
func (c *common) Skipped() bool {
        c.mu.RLock()
        defer c.mu.RUnlock()
        return c.skipped
}

// Parallel signals that this test is to be run in parallel with (and only with)
// other parallel tests.
func (t *T) Parallel() {
        t.signal <- (*T)(nil) // Release main testing loop
        <-t.startParallel     // Wait for serial tests to finish
        // Assuming Parallel is the first thing a test does, which is reasonable,
        // reinitialize the test's start time because it's actually starting now.
        t.start = time.Now()
}

// An internal type but exported because it is cross-package; part of the implementation
// of the "go test" command.
type InternalTest struct {
        Name string
        F    func(*T)
}

func tRunner(t *T, test *InternalTest) {
        // When this goroutine is done, either because test.F(t)
        // returned normally or because a test failure triggered
        // a call to runtime.Goexit, record the duration and send
        // a signal saying that the test is done.
        defer func() {
                t.duration = time.Now().Sub(t.start)
                // If the test panicked, print any test output before dying.
                err := recover()
                if !t.finished && err == nil {
                        err = fmt.Errorf("test executed panic(nil) or runtime.Goexit")
                }
                if err != nil {
                        t.Fail()
                        t.report()
                        panic(err)
                }
                t.signal <- t
        }()

        t.start = time.Now()
        test.F(t)
        t.finished = true
}

// An internal function but exported because it is cross-package; part of the implementation
// of the "go test" command.
func Main(matchString func(pat, str string) (bool, error), tests []InternalTest, benchmarks []InternalBenchmark, examples []InternalExample) {
        flag.Parse()
        parseCpuList()

        before()
        startAlarm()
        haveExamples = len(examples) > 0
        testOk := RunTests(matchString, tests)
        exampleOk := RunExamples(matchString, examples)
        stopAlarm()
        if !testOk || !exampleOk {
                fmt.Println("FAIL")
                after()
                os.Exit(1)
        }
        fmt.Println("PASS")
        RunBenchmarks(matchString, benchmarks)
        after()
}

func (t *T) report() {
        tstr := fmt.Sprintf("(%.2f seconds)", t.duration.Seconds())
        format := "--- %s: %s %s\n%s"
        if t.Failed() {
                fmt.Printf(format, "FAIL", t.name, tstr, t.output)
        } else if *chatty {
                if t.Skipped() {
                        fmt.Printf(format, "SKIP", t.name, tstr, t.output)
                } else {
                        fmt.Printf(format, "PASS", t.name, tstr, t.output)
                }
        }
}

func RunTests(matchString func(pat, str string) (bool, error), tests []InternalTest) (ok bool) {
        ok = true
        if len(tests) == 0 && !haveExamples {
                fmt.Fprintln(os.Stderr, "testing: warning: no tests to run")
                return
        }
        for _, procs := range cpuList {
                runtime.GOMAXPROCS(procs)
                // We build a new channel tree for each run of the loop.
                // collector merges in one channel all the upstream signals from parallel tests.
                // If all tests pump to the same channel, a bug can occur where a test
                // kicks off a goroutine that Fails, yet the test still delivers a completion signal,
                // which skews the counting.
                var collector = make(chan interface{})

                numParallel := 0
                startParallel := make(chan bool)

                for i := 0; i < len(tests); i++ {
                        matched, err := matchString(*match, tests[i].Name)
                        if err != nil {
                                fmt.Fprintf(os.Stderr, "testing: invalid regexp for -test.run: %s\n", err)
                                os.Exit(1)
                        }
                        if !matched {
                                continue
                        }
                        testName := tests[i].Name
                        if procs != 1 {
                                testName = fmt.Sprintf("%s-%d", tests[i].Name, procs)
                        }
                        t := &T{
                                common: common{
                                        signal: make(chan interface{}),
                                },
                                name:          testName,
                                startParallel: startParallel,
                        }
                        t.self = t
                        if *chatty {
                                fmt.Printf("=== RUN %s\n", t.name)
                        }
                        go tRunner(t, &tests[i])
                        out := (<-t.signal).(*T)
                        if out == nil { // Parallel run.
                                go func() {
                                        collector <- <-t.signal
                                }()
                                numParallel++
                                continue
                        }
                        t.report()
                        ok = ok && !out.Failed()
                }

                running := 0
                for numParallel+running > 0 {
                        if running < *parallel && numParallel > 0 {
                                startParallel <- true
                                running++
                                numParallel--
                                continue
                        }
                        t := (<-collector).(*T)
                        t.report()
                        ok = ok && !t.Failed()
                        running--
                }
        }
        return
}

// before runs before all testing.
func before() {
        if *memProfileRate > 0 {
                runtime.MemProfileRate = *memProfileRate
        }
        if *cpuProfile != "" {
                f, err := os.Create(toOutputDir(*cpuProfile))
                if err != nil {
                        fmt.Fprintf(os.Stderr, "testing: %s", err)
                        return
                }
                if err := pprof.StartCPUProfile(f); err != nil {
                        fmt.Fprintf(os.Stderr, "testing: can't start cpu profile: %s", err)
                        f.Close()
                        return
                }
                // Could save f so after can call f.Close; not worth the effort.
        }
        if *blockProfile != "" && *blockProfileRate >= 0 {
                runtime.SetBlockProfileRate(*blockProfileRate)
        }
        if *coverProfile != "" && cover.Mode == "" {
                fmt.Fprintf(os.Stderr, "testing: cannot use -test.coverprofile because test binary was not built with coverage enabled\n")
                os.Exit(2)
        }
}

// after runs after all testing.
func after() {
        if *cpuProfile != "" {
                pprof.StopCPUProfile() // flushes profile to disk
        }
        if *memProfile != "" {
                f, err := os.Create(toOutputDir(*memProfile))
                if err != nil {
                        fmt.Fprintf(os.Stderr, "testing: %s\n", err)
                        os.Exit(2)
                }
                if err = pprof.WriteHeapProfile(f); err != nil {
                        fmt.Fprintf(os.Stderr, "testing: can't write %s: %s\n", *memProfile, err)
                        os.Exit(2)
                }
                f.Close()
        }
        if *blockProfile != "" && *blockProfileRate >= 0 {
                f, err := os.Create(toOutputDir(*blockProfile))
                if err != nil {
                        fmt.Fprintf(os.Stderr, "testing: %s\n", err)
                        os.Exit(2)
                }
                if err = pprof.Lookup("block").WriteTo(f, 0); err != nil {
                        fmt.Fprintf(os.Stderr, "testing: can't write %s: %s\n", *blockProfile, err)
                        os.Exit(2)
                }
                f.Close()
        }
        if cover.Mode != "" {
                coverReport()
        }
}

// toOutputDir returns the file name relocated, if required, to outputDir.
// Simple implementation to avoid pulling in path/filepath.
func toOutputDir(path string) string {
        if *outputDir == "" || path == "" {
                return path
        }
        if runtime.GOOS == "windows" {
                // On Windows, it's clumsy, but we can be almost always correct
                // by just looking for a drive letter and a colon.
                // Absolute paths always have a drive letter (ignoring UNC).
                // Problem: if path == "C:A" and outputdir == "C:\Go" it's unclear
                // what to do, but even then path/filepath doesn't help.
                // TODO: Worth doing better? Probably not, because we're here only
                // under the management of go test.
                if len(path) >= 2 {
                        letter, colon := path[0], path[1]
                        if ('a' <= letter && letter <= 'z' || 'A' <= letter && letter <= 'Z') && colon == ':' {
                                // If path starts with a drive letter we're stuck with it regardless.
                                return path
                        }
                }
        }
        if os.IsPathSeparator(path[0]) {
                return path
        }
        return fmt.Sprintf("%s%c%s", *outputDir, os.PathSeparator, path)
}

var timer *time.Timer

// startAlarm starts an alarm if requested.
func startAlarm() {
        if *timeout > 0 {
                timer = time.AfterFunc(*timeout, func() {
                        panic(fmt.Sprintf("test timed out after %v", *timeout))
                })
        }
}

// stopAlarm turns off the alarm.
func stopAlarm() {
        if *timeout > 0 {
                timer.Stop()
        }
}

func parseCpuList() {
        for _, val := range strings.Split(*cpuListStr, ",") {
                val = strings.TrimSpace(val)
                if val == "" {
                        continue
                }
                cpu, err := strconv.Atoi(val)
                if err != nil || cpu <= 0 {
                        fmt.Fprintf(os.Stderr, "testing: invalid value %q for -test.cpu\n", val)
                        os.Exit(1)
                }
                cpuList = append(cpuList, cpu)
        }
        if cpuList == nil {
                cpuList = append(cpuList, runtime.GOMAXPROCS(-1))
        }
}