From 6b73e10d2d89f9ce773f9b47d61b195936d059ba Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:08:58 +0000 Subject: [PATCH] ixgbe: Use generic MDIO definitions and functions Compile-tested only. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/Kconfig | 1 + drivers/net/ixgbe/ixgbe_82598.c | 33 +++++++------- drivers/net/ixgbe/ixgbe_82599.c | 17 ++++---- drivers/net/ixgbe/ixgbe_main.c | 42 ++++++++++++++++++ drivers/net/ixgbe/ixgbe_phy.c | 95 ++++++++++++++--------------------------- drivers/net/ixgbe/ixgbe_type.h | 33 ++------------ 6 files changed, 102 insertions(+), 119 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 435bbc96444..b8727d54bdb 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2519,6 +2519,7 @@ config ENIC config IXGBE tristate "Intel(R) 10GbE PCI Express adapters support" depends on PCI && INET + select MDIO ---help--- This driver supports Intel(R) 10GbE PCI Express family of adapters. For more information on how to identify your adapter, go diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 03eb54f4f1c..e051964347e 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -229,14 +229,13 @@ static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw, *speed = 0; *autoneg = true; - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD, &speed_ability); if (status == 0) { - if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) + if (speed_ability & MDIO_SPEED_10G) *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) + if (speed_ability & MDIO_PMA_SPEED_1000) *speed |= IXGBE_LINK_SPEED_1GB_FULL; } @@ -526,9 +525,9 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, * clear indicates active; set indicates inactive. */ if (hw->phy.type == ixgbe_phy_nl) { - hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); - hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); - hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV, + hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg); + hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD, &adapt_comp_reg); if (link_up_wait_to_complete) { for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { @@ -541,10 +540,10 @@ static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, } msleep(100); hw->phy.ops.read_reg(hw, 0xC79F, - IXGBE_TWINAX_DEV, + MDIO_MMD_PMAPMD, &link_reg); hw->phy.ops.read_reg(hw, 0xC00C, - IXGBE_TWINAX_DEV, + MDIO_MMD_PMAPMD, &adapt_comp_reg); } } else { @@ -990,14 +989,14 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + MDIO_MMD_PMAPMD, sfp_addr); /* Poll status */ for (i = 0; i < 100; i++) { hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + MDIO_MMD_PMAPMD, &sfp_stat); sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) @@ -1013,7 +1012,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, /* Read data */ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data); + MDIO_MMD_PMAPMD, &sfp_data); *eeprom_data = (u8)(sfp_data >> 8); } else { @@ -1045,13 +1044,13 @@ static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ if (hw->phy.type == ixgbe_phy_tn || hw->phy.type == ixgbe_phy_cu_unknown) { - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); - if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, + &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; goto out; } diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 9e824b45041..6038ed14c9f 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -314,14 +314,13 @@ static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, *speed = 0; *autoneg = true; - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD, &speed_ability); if (status == 0) { - if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) + if (speed_ability & MDIO_SPEED_10G) *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) + if (speed_ability & MDIO_PMA_SPEED_1000) *speed |= IXGBE_LINK_SPEED_1GB_FULL; } @@ -1153,13 +1152,13 @@ u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) if (hw->phy.type == ixgbe_phy_tn || hw->phy.type == ixgbe_phy_cu_unknown) { - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); - if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, + &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; goto out; } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 01a88265d40..661bed64407 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -4642,6 +4642,40 @@ static int ixgbe_set_mac(struct net_device *netdev, void *p) return 0; } +static int +ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u16 value; + int rc; + + if (prtad != hw->phy.mdio.prtad) + return -EINVAL; + rc = hw->phy.ops.read_reg(hw, addr, devad, &value); + if (!rc) + rc = value; + return rc; +} + +static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad, + u16 addr, u16 value) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (prtad != hw->phy.mdio.prtad) + return -EINVAL; + return hw->phy.ops.write_reg(hw, addr, devad, value); +} + +static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); +} + #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs @@ -4675,6 +4709,7 @@ static const struct net_device_ops ixgbe_netdev_ops = { .ndo_vlan_rx_register = ixgbe_vlan_rx_register, .ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid, + .ndo_do_ioctl = ixgbe_ioctl, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ixgbe_netpoll, #endif @@ -4789,6 +4824,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* PHY */ memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops)); hw->phy.sfp_type = ixgbe_sfp_type_unknown; + /* ixgbe_identify_phy_generic will set prtad and mmds properly */ + hw->phy.mdio.prtad = MDIO_PRTAD_NONE; + hw->phy.mdio.mmds = 0; + hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + hw->phy.mdio.dev = netdev; + hw->phy.mdio.mdio_read = ixgbe_mdio_read; + hw->phy.mdio.mdio_write = ixgbe_mdio_write; /* set up this timer and work struct before calling get_invariants * which might start the timer diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 2543c32ca84..6d385ea3c2a 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -44,7 +44,6 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data); static bool ixgbe_get_i2c_data(u32 *i2cctl); static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw); -static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr); static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); @@ -61,8 +60,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) if (hw->phy.type == ixgbe_phy_unknown) { for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { - if (ixgbe_validate_phy_addr(hw, phy_addr)) { - hw->phy.addr = phy_addr; + if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) { ixgbe_get_phy_id(hw); hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id); @@ -78,26 +76,6 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) } /** - * ixgbe_validate_phy_addr - Determines phy address is valid - * @hw: pointer to hardware structure - * - **/ -static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) -{ - u16 phy_id = 0; - bool valid = false; - - hw->phy.addr = phy_addr; - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id); - - if (phy_id != 0xFFFF && phy_id != 0x0) - valid = true; - - return valid; -} - -/** * ixgbe_get_phy_id - Get the phy type * @hw: pointer to hardware structure * @@ -108,14 +86,12 @@ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) u16 phy_id_high = 0; u16 phy_id_low = 0; - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD, &phy_id_high); if (status == 0) { hw->phy.id = (u32)(phy_id_high << 16); - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD, &phy_id_low); hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); @@ -160,9 +136,8 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) * Perform soft PHY reset to the PHY_XS. * This will cause a soft reset to the PHY */ - return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, - IXGBE_MDIO_PHY_XS_RESET); + return hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, + MDIO_CTRL1_RESET); } /** @@ -192,7 +167,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, /* Setup and write the address cycle command */ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); @@ -223,7 +198,8 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, */ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (hw->phy.mdio.prtad << + IXGBE_MSCA_PHY_ADDR_SHIFT) | (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); @@ -292,7 +268,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, /* Setup and write the address cycle command */ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); @@ -323,7 +299,8 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, */ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (hw->phy.mdio.prtad << + IXGBE_MSCA_PHY_ADDR_SHIFT) | (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); @@ -365,7 +342,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) s32 status = IXGBE_NOT_IMPLEMENTED; u32 time_out; u32 max_time_out = 10; - u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + u16 autoneg_reg; /* * Set advertisement settings in PHY based on autoneg_advertised @@ -373,36 +350,31 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) * tnx devices cannot be "forced" to a autoneg 10G and fail. But can * for a 1G. */ - hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); + hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, &autoneg_reg); if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL) - autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */ + autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G; else - autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */ + autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G; - hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); + hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, autoneg_reg); /* Restart PHY autonegotiation and wait for completion */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); + hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg); - autoneg_reg |= IXGBE_MII_RESTART; + autoneg_reg |= MDIO_AN_CTRL1_RESTART; - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); + hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg); /* Wait for autonegotiation to finish */ for (time_out = 0; time_out < max_time_out; time_out++) { udelay(10); /* Restart PHY autonegotiation and wait for completion */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &autoneg_reg); - autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE; - if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) { + autoneg_reg &= MDIO_AN_STAT1_COMPLETE; + if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) { status = 0; break; } @@ -457,23 +429,21 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) s32 ret_val = 0; u32 i; - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data); /* reset the PHY and poll for completion */ - hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, - (phy_data | IXGBE_MDIO_PHY_XS_RESET)); + hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, + (phy_data | MDIO_CTRL1_RESET)); for (i = 0; i < 100; i++) { - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, - IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); - if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0) + hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, + &phy_data); + if ((phy_data & MDIO_CTRL1_RESET) == 0) break; msleep(10); } - if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) { + if ((phy_data & MDIO_CTRL1_RESET) != 0) { hw_dbg(hw, "PHY reset did not complete.\n"); ret_val = IXGBE_ERR_PHY; goto out; @@ -509,7 +479,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) for (i = 0; i < edata; i++) { hw->eeprom.ops.read(hw, data_offset, &eword); hw->phy.ops.write_reg(hw, phy_offset, - IXGBE_TWINAX_DEV, eword); + MDIO_MMD_PMAPMD, eword); hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, phy_offset); data_offset++; @@ -1302,7 +1272,7 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, udelay(10); status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + MDIO_MMD_VEND1, &phy_data); phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; @@ -1330,8 +1300,7 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, { s32 status = 0; - status = hw->phy.ops.read_reg(hw, TNX_FW_REV, - IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + status = hw->phy.ops.read_reg(hw, TNX_FW_REV, MDIO_MMD_VEND1, firmware_version); return status; diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index bdfdf3bca27..e49e8af59ed 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -29,6 +29,7 @@ #define _IXGBE_TYPE_H_ #include +#include /* Vendor ID */ #define IXGBE_INTEL_VENDOR_ID 0x8086 @@ -848,13 +849,7 @@ /* Omer bit masks */ #define IXGBE_CORECTL_WRITE_CMD 0x00010000 -/* Device Type definitions for new protocol MDIO commands */ -#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1 -#define IXGBE_MDIO_PCS_DEV_TYPE 0x3 -#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4 -#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7 -#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */ -#define IXGBE_TWINAX_DEV 1 +/* MDIO definitions */ #define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */ @@ -865,32 +860,10 @@ #define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018 #define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010 -#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */ -#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */ -#define IXGBE_MDIO_PHY_XS_CONTROL 0x0 /* PHY_XS Control Reg */ -#define IXGBE_MDIO_PHY_XS_RESET 0x8000 /* PHY_XS Reset */ -#define IXGBE_MDIO_PHY_ID_HIGH 0x2 /* PHY ID High Reg*/ -#define IXGBE_MDIO_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/ -#define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Ability Reg */ -#define IXGBE_MDIO_PHY_SPEED_10G 0x0001 /* 10G capable */ -#define IXGBE_MDIO_PHY_SPEED_1G 0x0010 /* 1G capable */ -#define IXGBE_MDIO_PHY_EXT_ABILITY 0xB /* Ext Ability Reg */ -#define IXGBE_MDIO_PHY_10GBASET_ABILITY 0x0004 /* 10GBaseT capable */ -#define IXGBE_MDIO_PHY_1000BASET_ABILITY 0x0020 /* 1000BaseT capable */ -#define IXGBE_MDIO_PHY_100BASETX_ABILITY 0x0080 /* 100BaseTX capable */ - #define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */ -/* MII clause 22/28 definitions */ -#define IXGBE_MDIO_PHY_LOW_POWER_MODE 0x0800 - -#define IXGBE_MII_SPEED_SELECTION_REG 0x10 -#define IXGBE_MII_RESTART 0x200 -#define IXGBE_MII_AUTONEG_COMPLETE 0x20 -#define IXGBE_MII_AUTONEG_REG 0x0 - #define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0 #define IXGBE_MAX_PHY_ADDR 32 @@ -2214,8 +2187,8 @@ struct ixgbe_mac_info { struct ixgbe_phy_info { struct ixgbe_phy_operations ops; + struct mdio_if_info mdio; enum ixgbe_phy_type type; - u32 addr; u32 id; enum ixgbe_sfp_type sfp_type; bool sfp_setup_needed; -- 2.11.4.GIT