From f7214ff4e8248513ec626212b2c1a3ca0b2a0888 Mon Sep 17 00:00:00 2001 From: Stelian Pop Date: Thu, 8 Sep 2005 10:19:48 +0200 Subject: [PATCH] [PATCH] USB: add apple usb touchpad driver This is a driver for the USB touchpad which can be found on post-February 2005 Apple PowerBooks. This driver is derived from Johannes Berg's appletrackpad driver [1], but it has been improved in some areas: * appletouch is a full kernel driver, no userspace program is necessary * appletouch can be interfaced with the synaptics X11 driver[2], in order to have touchpad acceleration, scrolling, two/three finger tap, etc. This driver has been tested by the readers of the 'debian-powerpc' mailing list for a few weeks now and I believe it is now ready for inclusion into the mainline kernel. Credits go to Johannes Berg for reverse-engineering the touchpad protocol, Frank Arnold for further improvements, and Alex Harper for some additional information about the inner workings of the touchpad sensors. Signed-off-by: Stelian Pop Signed-off-by: Greg Kroah-Hartman --- Documentation/input/appletouch.txt | 84 +++++++ drivers/usb/input/Kconfig | 20 ++ drivers/usb/input/Makefile | 1 + drivers/usb/input/appletouch.c | 469 +++++++++++++++++++++++++++++++++++++ 4 files changed, 574 insertions(+) create mode 100644 Documentation/input/appletouch.txt create mode 100644 drivers/usb/input/appletouch.c diff --git a/Documentation/input/appletouch.txt b/Documentation/input/appletouch.txt new file mode 100644 index 00000000000..b48d11d0326 --- /dev/null +++ b/Documentation/input/appletouch.txt @@ -0,0 +1,84 @@ +Apple Touchpad Driver (appletouch) +---------------------------------- + Copyright (C) 2005 Stelian Pop + +appletouch is a Linux kernel driver for the USB touchpad found on post +February 2005 Apple Alu Powerbooks. + +This driver is derived from Johannes Berg's appletrackpad driver[1], but it has +been improved in some areas: + * appletouch is a full kernel driver, no userspace program is necessary + * appletouch can be interfaced with the synaptics X11 driver, in order + to have touchpad acceleration, scrolling, etc. + +Credits go to Johannes Berg for reverse-engineering the touchpad protocol, +Frank Arnold for further improvements, and Alex Harper for some additional +information about the inner workings of the touchpad sensors. + +Usage: +------ + +In order to use the touchpad in the basic mode, compile the driver and load +the module. A new input device will be detected and you will be able to read +the mouse data from /dev/input/mice (using gpm, or X11). + +In X11, you can configure the touchpad to use the synaptics X11 driver, which +will give additional functionalities, like acceleration, scrolling, 2 finger +tap for middle button mouse emulation, 3 finger tap for right button mouse +emulation, etc. In order to do this, make sure you're using a recent version of +the synaptics driver (tested with 0.14.2, available from [2]), and configure a +new input device in your X11 configuration file (take a look below for an +example). For additional configuration, see the synaptics driver documentation. + + Section "InputDevice" + Identifier "Synaptics Touchpad" + Driver "synaptics" + Option "SendCoreEvents" "true" + Option "Device" "/dev/input/mice" + Option "Protocol" "auto-dev" + Option "LeftEdge" "0" + Option "RightEdge" "850" + Option "TopEdge" "0" + Option "BottomEdge" "645" + Option "MinSpeed" "0.4" + Option "MaxSpeed" "1" + Option "AccelFactor" "0.02" + Option "FingerLow" "0" + Option "FingerHigh" "30" + Option "MaxTapMove" "20" + Option "MaxTapTime" "100" + Option "HorizScrollDelta" "0" + Option "VertScrollDelta" "30" + Option "SHMConfig" "on" + EndSection + + Section "ServerLayout" + ... + InputDevice "Mouse" + InputDevice "Synaptics Touchpad" + ... + EndSection + +Fuzz problems: +-------------- + +The touchpad sensors are very sensitive to heat, and will generate a lot of +noise when the temperature changes. This is especially true when you power-on +the laptop for the first time. + +The appletouch driver tries to handle this noise and auto adapt itself, but it +is not perfect. If finger movements are not recognized anymore, try reloading +the driver. + +You can activate debugging using the 'debug' module parameter. A value of 0 +deactivates any debugging, 1 activates tracing of invalid samples, 2 activates +full tracing (each sample is being traced): + modprobe appletouch debug=1 + or + echo "1" > /sys/module/appletouch/parameters/debug + +Links: +------ + +[1]: http://johannes.sipsolutions.net/PowerBook/touchpad/ +[2]: http://web.telia.com/~u89404340/touchpad/index.html diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 482c4be521f..1e53934907c 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -286,3 +286,23 @@ config USB_KEYSPAN_REMOTE To compile this driver as a module, choose M here: the module will be called keyspan_remote. + +config USB_APPLETOUCH + tristate "Apple USB Touchpad support" + depends on USB && INPUT + ---help--- + Say Y here if you want to use an Apple USB Touchpad. + + These are the touchpads that can be found on post-February 2005 + Apple Powerbooks (prior models have a Synaptics touchpad connected + to the ADB bus). + + This driver provides a basic mouse driver but can be interfaced + with the synaptics X11 driver to provide acceleration and + scrolling in X11. + + For further information, see + . + + To compile this driver as a module, choose M here: the + module will be called appletouch. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 43b2f999edf..5e03b93f29f 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -41,3 +41,4 @@ obj-$(CONFIG_USB_WACOM) += wacom.o obj-$(CONFIG_USB_ACECAD) += acecad.o obj-$(CONFIG_USB_YEALINK) += yealink.o obj-$(CONFIG_USB_XPAD) += xpad.o +obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c new file mode 100644 index 00000000000..e03c1c567a1 --- /dev/null +++ b/drivers/usb/input/appletouch.c @@ -0,0 +1,469 @@ +/* + * Apple USB Touchpad (for post-February 2005 PowerBooks) driver + * + * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + * Copyright (C) 2005 Stelian Pop (stelian@popies.net) + * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + * Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + * + * Thanks to Alex Harper for his inputs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Apple has powerbooks which have the keyboard with different Product IDs */ +#define APPLE_VENDOR_ID 0x05AC + +#define ATP_DEVICE(prod) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ + .idVendor = APPLE_VENDOR_ID, \ + .idProduct = (prod), \ + .bInterfaceClass = 0x03, \ + .bInterfaceProtocol = 0x02 + +/* table of devices that work with this driver */ +static struct usb_device_id atp_table [] = { + { ATP_DEVICE(0x020E) }, + { ATP_DEVICE(0x020F) }, + { ATP_DEVICE(0x030A) }, + { ATP_DEVICE(0x030B) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, atp_table); + +/* size of a USB urb transfer */ +#define ATP_DATASIZE 81 + +/* + * number of sensors. Note that only 16 instead of 26 X (horizontal) + * sensors exist on 12" and 15" PowerBooks. All models have 16 Y + * (vertical) sensors. + */ +#define ATP_XSENSORS 26 +#define ATP_YSENSORS 16 + +/* amount of fuzz this touchpad generates */ +#define ATP_FUZZ 16 + +/* maximum pressure this driver will report */ +#define ATP_PRESSURE 300 +/* + * multiplication factor for the X and Y coordinates. + * We try to keep the touchpad aspect ratio while still doing only simple + * arithmetics. + * The factors below give coordinates like: + * 0 <= x < 960 on 12" and 15" Powerbooks + * 0 <= x < 1600 on 17" Powerbooks + * 0 <= y < 646 + */ +#define ATP_XFACT 64 +#define ATP_YFACT 43 + +/* + * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is + * ignored. + */ +#define ATP_THRESHOLD 5 + +/* Structure to hold all of our device specific stuff */ +struct atp { + struct usb_device * udev; /* usb device */ + struct urb * urb; /* usb request block */ + signed char * data; /* transferred data */ + int open; /* non-zero if opened */ + struct input_dev input; /* input dev */ + int valid; /* are the sensors valid ? */ + int x_old; /* last reported x/y, */ + int y_old; /* used for smoothing */ + /* current value of the sensors */ + signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS]; + /* last value of the sensors */ + signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; + /* accumulated sensors */ + int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; +}; + +#define dbg_dump(msg, tab) \ + if (debug > 1) { \ + int i; \ + printk("appletouch: %s %lld", msg, (long long)jiffies); \ + for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \ + printk(" %02x", tab[i]); \ + printk("\n"); \ + } + +#define dprintk(format, a...) \ + do { \ + if (debug) printk(format, ##a); \ + } while (0) + +MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold"); +MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver"); +MODULE_LICENSE("GPL"); + +static int debug = 1; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activate debugging output"); + +static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, + int *z, int *fingers) +{ + int i; + /* values to calculate mean */ + int pcum = 0, psum = 0; + + *fingers = 0; + + for (i = 0; i < nb_sensors; i++) { + if (xy_sensors[i] < ATP_THRESHOLD) + continue; + if ((i - 1 < 0) || (xy_sensors[i - 1] < ATP_THRESHOLD)) + (*fingers)++; + pcum += xy_sensors[i] * i; + psum += xy_sensors[i]; + } + + if (psum > 0) { + *z = psum; + return pcum * fact / psum; + } + + return 0; +} + +static inline void atp_report_fingers(struct input_dev *input, int fingers) +{ + input_report_key(input, BTN_TOOL_FINGER, fingers == 1); + input_report_key(input, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2); +} + +static void atp_complete(struct urb* urb, struct pt_regs* regs) +{ + int x, y, x_z, y_z, x_f, y_f; + int retval, i; + struct atp *dev = urb->context; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* This urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", + __FUNCTION__, urb->status); + goto exit; + } + + /* drop incomplete datasets */ + if (dev->urb->actual_length != ATP_DATASIZE) { + dprintk("appletouch: incomplete data package.\n"); + goto exit; + } + + /* reorder the sensors values */ + for (i = 0; i < 8; i++) { + /* X values */ + dev->xy_cur[i ] = dev->data[5 * i + 2]; + dev->xy_cur[i + 8] = dev->data[5 * i + 4]; + dev->xy_cur[i + 16] = dev->data[5 * i + 42]; + if (i < 2) + dev->xy_cur[i + 24] = dev->data[5 * i + 44]; + + /* Y values */ + dev->xy_cur[i + 26] = dev->data[5 * i + 1]; + dev->xy_cur[i + 34] = dev->data[5 * i + 3]; + } + + dbg_dump("sample", dev->xy_cur); + + if (!dev->valid) { + /* first sample */ + dev->valid = 1; + dev->x_old = dev->y_old = -1; + memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); + + /* 17" Powerbooks have 10 extra X sensors */ + for (i = 16; i < ATP_XSENSORS; i++) + if (dev->xy_cur[i]) { + printk("appletouch: 17\" model detected.\n"); + input_set_abs_params(&dev->input, ABS_X, 0, + (ATP_XSENSORS - 1) * + ATP_XFACT - 1, + ATP_FUZZ, 0); + break; + } + + goto exit; + } + + for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) { + /* accumulate the change */ + signed char change = dev->xy_old[i] - dev->xy_cur[i]; + dev->xy_acc[i] -= change; + + /* prevent down drifting */ + if (dev->xy_acc[i] < 0) + dev->xy_acc[i] = 0; + } + + memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); + + dbg_dump("accumulator", dev->xy_acc); + + x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS, + ATP_XFACT, &x_z, &x_f); + y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, + ATP_YFACT, &y_z, &y_f); + + if (x && y) { + if (dev->x_old != -1) { + x = (dev->x_old * 3 + x) >> 2; + y = (dev->y_old * 3 + y) >> 2; + dev->x_old = x; + dev->y_old = y; + + if (debug > 1) + printk("appletouch: X: %3d Y: %3d " + "Xz: %3d Yz: %3d\n", + x, y, x_z, y_z); + + input_report_key(&dev->input, BTN_TOUCH, 1); + input_report_abs(&dev->input, ABS_X, x); + input_report_abs(&dev->input, ABS_Y, y); + input_report_abs(&dev->input, ABS_PRESSURE, + min(ATP_PRESSURE, x_z + y_z)); + atp_report_fingers(&dev->input, max(x_f, y_f)); + } + dev->x_old = x; + dev->y_old = y; + } + else if (!x && !y) { + + dev->x_old = dev->y_old = -1; + input_report_key(&dev->input, BTN_TOUCH, 0); + input_report_abs(&dev->input, ABS_PRESSURE, 0); + atp_report_fingers(&dev->input, 0); + + /* reset the accumulator on release */ + memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); + } + + input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]); + + input_sync(&dev->input); + +exit: + retval = usb_submit_urb(dev->urb, GFP_ATOMIC); + if (retval) { + err("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); + } +} + +static int atp_open(struct input_dev *input) +{ + struct atp *dev = input->private; + + if (usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + dev->open = 1; + return 0; +} + +static void atp_close(struct input_dev *input) +{ + struct atp *dev = input->private; + + usb_kill_urb(dev->urb); + dev->open = 0; +} + +static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) +{ + struct atp *dev = NULL; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int int_in_endpointAddr = 0; + int i, retval = -ENOMEM; + + /* allocate memory for our device state and initialize it */ + dev = kmalloc(sizeof(struct atp), GFP_KERNEL); + if (dev == NULL) { + err("Out of memory"); + goto err_kmalloc; + } + memset(dev, 0, sizeof(struct atp)); + + dev->udev = interface_to_usbdev(iface); + + /* set up the endpoint information */ + /* use only the first interrupt-in endpoint */ + iface_desc = iface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { + endpoint = &iface_desc->endpoint[i].desc; + if (!int_in_endpointAddr && + (endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT)) { + /* we found an interrupt in endpoint */ + int_in_endpointAddr = endpoint->bEndpointAddress; + break; + } + } + if (!int_in_endpointAddr) { + retval = -EIO; + err("Could not find int-in endpoint"); + goto err_endpoint; + } + + /* save our data pointer in this interface device */ + usb_set_intfdata(iface, dev); + + dev->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->urb) { + retval = -ENOMEM; + goto err_usballoc; + } + dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL, + &dev->urb->transfer_dma); + if (!dev->data) { + retval = -ENOMEM; + goto err_usbbufalloc; + } + usb_fill_int_urb(dev->urb, dev->udev, + usb_rcvintpipe(dev->udev, int_in_endpointAddr), + dev->data, ATP_DATASIZE, atp_complete, dev, 1); + + init_input_dev(&dev->input); + dev->input.name = "appletouch"; + dev->input.dev = &iface->dev; + dev->input.private = dev; + dev->input.open = atp_open; + dev->input.close = atp_close; + + usb_to_input_id(dev->udev, &dev->input.id); + + set_bit(EV_ABS, dev->input.evbit); + + /* + * 12" and 15" Powerbooks only have 16 x sensors, + * 17" models are detected later. + */ + input_set_abs_params(&dev->input, ABS_X, 0, + (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); + input_set_abs_params(&dev->input, ABS_Y, 0, + (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); + input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); + + set_bit(EV_KEY, dev->input.evbit); + set_bit(BTN_TOUCH, dev->input.keybit); + set_bit(BTN_TOOL_FINGER, dev->input.keybit); + set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit); + set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit); + set_bit(BTN_LEFT, dev->input.keybit); + + input_register_device(&dev->input); + + printk(KERN_INFO "input: appletouch connected\n"); + + return 0; + +err_usbbufalloc: + usb_free_urb(dev->urb); +err_usballoc: + usb_set_intfdata(iface, NULL); +err_endpoint: + kfree(dev); +err_kmalloc: + return retval; +} + +static void atp_disconnect(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + + usb_set_intfdata(iface, NULL); + if (dev) { + usb_kill_urb(dev->urb); + input_unregister_device(&dev->input); + usb_free_urb(dev->urb); + usb_buffer_free(dev->udev, ATP_DATASIZE, + dev->data, dev->urb->transfer_dma); + kfree(dev); + } + printk(KERN_INFO "input: appletouch disconnected\n"); +} + +static int atp_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct atp *dev = usb_get_intfdata(iface); + usb_kill_urb(dev->urb); + dev->valid = 0; + return 0; +} + +static int atp_resume(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + return 0; +} + +static struct usb_driver atp_driver = { + .owner = THIS_MODULE, + .name = "appletouch", + .probe = atp_probe, + .disconnect = atp_disconnect, + .suspend = atp_suspend, + .resume = atp_resume, + .id_table = atp_table, +}; + +static int __init atp_init(void) +{ + return usb_register(&atp_driver); +} + +static void __exit atp_exit(void) +{ + usb_deregister(&atp_driver); +} + +module_init(atp_init); +module_exit(atp_exit); -- 2.11.4.GIT