From f6bac3ea5990653765700b2c3778b08782abebe5 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 26 Nov 2008 16:17:11 -0500 Subject: [PATCH] ath5k: preserve higher order bits when setting mac address In some cases we would like to set the mac address without changing the operating mode. However, Atheros cards store PCU data in the high 16 bits of the mac address register. Change ath5k_hw_set_lladdr() to not clobber the PCU settings. Changes-licensed-under: ISC Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/pcu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c index d7f0c1017bd..79879f2d426 100644 --- a/drivers/net/wireless/ath5k/pcu.c +++ b/drivers/net/wireless/ath5k/pcu.c @@ -267,24 +267,23 @@ void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) * @mac: The card's mac address * * Set station id on hw using the provided mac address - * - * NOTE: This is only called during attach, don't call it - * on reset because it overwrites all AR5K_STA_ID1 settings. - * We have set_opmode (above) for reset. */ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) { u32 low_id, high_id; + u32 pcu_reg; ATH5K_TRACE(ah->ah_sc); /* Set new station ID */ memcpy(ah->ah_sta_id, mac, ETH_ALEN); + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + low_id = AR5K_LOW_ID(mac); high_id = AR5K_HIGH_ID(mac); ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); - ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); return 0; } -- 2.11.4.GIT