From 991528d7348667924176f3e29addea0675298944 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 25 Sep 2006 16:28:13 -0700 Subject: [PATCH] ACPI: Processor native C-states using MWAIT Intel processors starting with the Core Duo support support processor native C-state using the MWAIT instruction. Refer: Intel Architecture Software Developer's Manual http://www.intel.com/design/Pentium4/manuals/253668.htm Platform firmware exports the support for Native C-state to OS using ACPI _PDC and _CST methods. Refer: Intel Processor Vendor-Specific ACPI: Interface Specification http://www.intel.com/technology/iapc/acpi/downloads/302223.htm With Processor Native C-state, we use 'MWAIT' instruction on the processor to enter different C-states (C1, C2, C3). We won't use the special IO ports to enter C-state and no SMM mode etc required to enter C-state. Overall this will mean better C-state support. One major advantage of using MWAIT for all C-states is, with this and "treat interrupt as break event" feature of MWAIT, we can now get accurate timing for the time spent in C1, C2, .. states. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/i386/kernel/acpi/cstate.c | 122 ++++++++++++++++++++++++++++++++++++++++- arch/i386/kernel/process.c | 22 +++++--- arch/x86_64/kernel/process.c | 22 +++++--- drivers/acpi/processor_idle.c | 101 +++++++++++++++++++++------------- include/acpi/pdc_intel.h | 9 ++- include/acpi/processor.h | 18 ++++++ include/asm-i386/processor.h | 2 + include/asm-x86_64/processor.h | 2 + 8 files changed, 242 insertions(+), 56 deletions(-) diff --git a/arch/i386/kernel/acpi/cstate.c b/arch/i386/kernel/acpi/cstate.c index 25db49ef177..20563e52c62 100644 --- a/arch/i386/kernel/acpi/cstate.c +++ b/arch/i386/kernel/acpi/cstate.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -41,5 +42,124 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, flags->bm_check = 1; } } - EXPORT_SYMBOL(acpi_processor_power_init_bm_check); + +/* The code below handles cstate entry with monitor-mwait pair on Intel*/ + +struct cstate_entry_s { + struct { + unsigned int eax; + unsigned int ecx; + } states[ACPI_PROCESSOR_MAX_POWER]; +}; +static struct cstate_entry_s *cpu_cstate_entry; /* per CPU ptr */ + +static short mwait_supported[ACPI_PROCESSOR_MAX_POWER]; + +#define MWAIT_SUBSTATE_MASK (0xf) +#define MWAIT_SUBSTATE_SIZE (4) + +#define CPUID_MWAIT_LEAF (5) +#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1) +#define CPUID5_ECX_INTERRUPT_BREAK (0x2) + +#define MWAIT_ECX_INTERRUPT_BREAK (0x1) + +#define NATIVE_CSTATE_BEYOND_HALT (2) + +int acpi_processor_ffh_cstate_probe(unsigned int cpu, + struct acpi_processor_cx *cx, struct acpi_power_register *reg) +{ + struct cstate_entry_s *percpu_entry; + struct cpuinfo_x86 *c = cpu_data + cpu; + + cpumask_t saved_mask; + int retval; + unsigned int eax, ebx, ecx, edx; + unsigned int edx_part; + unsigned int cstate_type; /* C-state type and not ACPI C-state type */ + unsigned int num_cstate_subtype; + + if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF ) + return -1; + + if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT) + return -1; + + percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); + percpu_entry->states[cx->index].eax = 0; + percpu_entry->states[cx->index].ecx = 0; + + /* Make sure we are running on right CPU */ + saved_mask = current->cpus_allowed; + retval = set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (retval) + return -1; + + cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx); + + /* Check whether this particular cx_type (in CST) is supported or not */ + cstate_type = (cx->address >> MWAIT_SUBSTATE_SIZE) + 1; + edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE); + num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK; + + retval = 0; + if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) { + retval = -1; + goto out; + } + + /* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */ + if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) || + !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) { + retval = -1; + goto out; + } + percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK; + + /* Use the hint in CST */ + percpu_entry->states[cx->index].eax = cx->address; + + if (!mwait_supported[cstate_type]) { + mwait_supported[cstate_type] = 1; + printk(KERN_DEBUG "Monitor-Mwait will be used to enter C-%d " + "state\n", cx->type); + } + +out: + set_cpus_allowed(current, saved_mask); + return retval; +} +EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe); + +void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx) +{ + unsigned int cpu = smp_processor_id(); + struct cstate_entry_s *percpu_entry; + + percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); + mwait_idle_with_hints(percpu_entry->states[cx->index].eax, + percpu_entry->states[cx->index].ecx); +} +EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter); + +static int __init ffh_cstate_init(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + if (c->x86_vendor != X86_VENDOR_INTEL) + return -1; + + cpu_cstate_entry = alloc_percpu(struct cstate_entry_s); + return 0; +} + +static void __exit ffh_cstate_exit(void) +{ + if (cpu_cstate_entry) { + free_percpu(cpu_cstate_entry); + cpu_cstate_entry = NULL; + } +} + +arch_initcall(ffh_cstate_init); +__exitcall(ffh_cstate_exit); diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index b0a07801d9d..57d375900af 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -236,20 +236,28 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait); * We execute MONITOR against need_resched and enter optimized wait state * through MWAIT. Whenever someone changes need_resched, we would be woken * up from MWAIT (without an IPI). + * + * New with Core Duo processors, MWAIT can take some hints based on CPU + * capability. */ -static void mwait_idle(void) +void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) { - local_irq_enable(); - - while (!need_resched()) { + if (!need_resched()) { __monitor((void *)¤t_thread_info()->flags, 0, 0); smp_mb(); - if (need_resched()) - break; - __mwait(0, 0); + if (!need_resched()) + __mwait(eax, ecx); } } +/* Default MONITOR/MWAIT with no hints, used for default C1 state */ +static void mwait_idle(void) +{ + local_irq_enable(); + while (!need_resched()) + mwait_idle_with_hints(0, 0); +} + void __devinit select_idle_routine(const struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_MWAIT)) { diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 5e95b257ee2..49f7fac6229 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -238,20 +238,28 @@ void cpu_idle (void) * We execute MONITOR against need_resched and enter optimized wait state * through MWAIT. Whenever someone changes need_resched, we would be woken * up from MWAIT (without an IPI). + * + * New with Core Duo processors, MWAIT can take some hints based on CPU + * capability. */ -static void mwait_idle(void) +void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) { - local_irq_enable(); - - while (!need_resched()) { + if (!need_resched()) { __monitor((void *)¤t_thread_info()->flags, 0, 0); smp_mb(); - if (need_resched()) - break; - __mwait(0, 0); + if (!need_resched()) + __mwait(eax, ecx); } } +/* Default MONITOR/MWAIT with no hints, used for default C1 state */ +static void mwait_idle(void) +{ + local_irq_enable(); + while (!need_resched()) + mwait_idle_with_hints(0,0); +} + void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) { static int printed; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 0a395fca843..429a39dbd75 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -219,6 +219,23 @@ static void acpi_safe_halt(void) static atomic_t c3_cpu_count; +/* Common C-state entry for C2, C3, .. */ +static void acpi_cstate_enter(struct acpi_processor_cx *cstate) +{ + if (cstate->space_id == ACPI_CSTATE_FFH) { + /* Call into architectural FFH based C-state */ + acpi_processor_ffh_cstate_enter(cstate); + } else { + int unused; + /* IO port based C-state */ + inb(cstate->address); + /* Dummy wait op - must do something useless after P_LVL2 read + because chipsets cannot guarantee that STPCLK# signal + gets asserted in time to freeze execution properly. */ + unused = inl(acpi_fadt.xpm_tmr_blk.address); + } +} + static void acpi_processor_idle(void) { struct acpi_processor *pr = NULL; @@ -361,11 +378,7 @@ static void acpi_processor_idle(void) /* Get start time (ticks) */ t1 = inl(acpi_fadt.xpm_tmr_blk.address); /* Invoke C2 */ - inb(cx->address); - /* Dummy wait op - must do something useless after P_LVL2 read - because chipsets cannot guarantee that STPCLK# signal - gets asserted in time to freeze execution properly. */ - t2 = inl(acpi_fadt.xpm_tmr_blk.address); + acpi_cstate_enter(cx); /* Get end time (ticks) */ t2 = inl(acpi_fadt.xpm_tmr_blk.address); @@ -401,9 +414,7 @@ static void acpi_processor_idle(void) /* Get start time (ticks) */ t1 = inl(acpi_fadt.xpm_tmr_blk.address); /* Invoke C3 */ - inb(cx->address); - /* Dummy wait op (see above) */ - t2 = inl(acpi_fadt.xpm_tmr_blk.address); + acpi_cstate_enter(cx); /* Get end time (ticks) */ t2 = inl(acpi_fadt.xpm_tmr_blk.address); if (pr->flags.bm_check) { @@ -628,20 +639,16 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) return 0; } -static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr) +static int acpi_processor_get_power_info_default(struct acpi_processor *pr) { - - /* Zero initialize all the C-states info. */ - memset(pr->power.states, 0, sizeof(pr->power.states)); - - /* set the first C-State to C1 */ - pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; - - /* the C0 state only exists as a filler in our array, - * and all processors need to support C1 */ + if (!pr->power.states[ACPI_STATE_C1].valid) { + /* set the first C-State to C1 */ + /* all processors need to support C1 */ + pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; + pr->power.states[ACPI_STATE_C1].valid = 1; + } + /* the C0 state only exists as a filler in our array */ pr->power.states[ACPI_STATE_C0].valid = 1; - pr->power.states[ACPI_STATE_C1].valid = 1; - return 0; } @@ -658,12 +665,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) if (nocst) return -ENODEV; - current_count = 1; - - /* Zero initialize C2 onwards and prepare for fresh CST lookup */ - for (i = 2; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(&(pr->power.states[i]), 0, - sizeof(struct acpi_processor_cx)); + current_count = 0; status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer); if (ACPI_FAILURE(status)) { @@ -718,22 +720,39 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) (reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) continue; - cx.address = (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) ? - 0 : reg->address; - /* There should be an easy way to extract an integer... */ obj = (union acpi_object *)&(element->package.elements[1]); if (obj->type != ACPI_TYPE_INTEGER) continue; cx.type = obj->integer.value; - - if ((cx.type != ACPI_STATE_C1) && - (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) - continue; - - if ((cx.type < ACPI_STATE_C2) || (cx.type > ACPI_STATE_C3)) - continue; + /* + * Some buggy BIOSes won't list C1 in _CST - + * Let acpi_processor_get_power_info_default() handle them later + */ + if (i == 1 && cx.type != ACPI_STATE_C1) + current_count++; + + cx.address = reg->address; + cx.index = current_count + 1; + + cx.space_id = ACPI_CSTATE_SYSTEMIO; + if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) { + if (acpi_processor_ffh_cstate_probe + (pr->id, &cx, reg) == 0) { + cx.space_id = ACPI_CSTATE_FFH; + } else if (cx.type != ACPI_STATE_C1) { + /* + * C1 is a special case where FIXED_HARDWARE + * can be handled in non-MWAIT way as well. + * In that case, save this _CST entry info. + * That is, we retain space_id of SYSTEM_IO for + * halt based C1. + * Otherwise, ignore this info and continue. + */ + continue; + } + } obj = (union acpi_object *)&(element->package.elements[2]); if (obj->type != ACPI_TYPE_INTEGER) @@ -938,12 +957,18 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr) /* NOTE: the idle thread may not be running while calling * this function */ - /* Adding C1 state */ - acpi_processor_get_power_info_default_c1(pr); + /* Zero initialize all the C-states info. */ + memset(pr->power.states, 0, sizeof(pr->power.states)); + result = acpi_processor_get_power_info_cst(pr); if (result == -ENODEV) acpi_processor_get_power_info_fadt(pr); + if (result) + return result; + + acpi_processor_get_power_info_default(pr); + pr->power.count = acpi_processor_power_verify(pr); /* diff --git a/include/acpi/pdc_intel.h b/include/acpi/pdc_intel.h index c5472be6f3a..e72bfdd887f 100644 --- a/include/acpi/pdc_intel.h +++ b/include/acpi/pdc_intel.h @@ -13,6 +13,7 @@ #define ACPI_PDC_SMP_C_SWCOORD (0x0040) #define ACPI_PDC_SMP_T_SWCOORD (0x0080) #define ACPI_PDC_C_C1_FFH (0x0100) +#define ACPI_PDC_C_C2C3_FFH (0x0200) #define ACPI_PDC_EST_CAPABILITY_SMP (ACPI_PDC_SMP_C1PT | \ ACPI_PDC_C_C1_HALT | \ @@ -23,8 +24,10 @@ ACPI_PDC_SMP_P_SWCOORD | \ ACPI_PDC_P_FFH) -#define ACPI_PDC_C_CAPABILITY_SMP (ACPI_PDC_SMP_C2C3 | \ - ACPI_PDC_SMP_C1PT | \ - ACPI_PDC_C_C1_HALT) +#define ACPI_PDC_C_CAPABILITY_SMP (ACPI_PDC_SMP_C2C3 | \ + ACPI_PDC_SMP_C1PT | \ + ACPI_PDC_C_C1_HALT | \ + ACPI_PDC_C_C1_FFH | \ + ACPI_PDC_C_C2C3_FFH) #endif /* __PDC_INTEL_H__ */ diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 9dd5b75961f..7798d2a9f79 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -29,6 +29,9 @@ #define DOMAIN_COORD_TYPE_SW_ANY 0xfd #define DOMAIN_COORD_TYPE_HW_ALL 0xfe +#define ACPI_CSTATE_SYSTEMIO (0) +#define ACPI_CSTATE_FFH (1) + /* Power Management */ struct acpi_processor_cx; @@ -58,6 +61,8 @@ struct acpi_processor_cx { u8 valid; u8 type; u32 address; + u8 space_id; + u8 index; u32 latency; u32 latency_ticks; u32 power; @@ -206,6 +211,9 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr); #ifdef ARCH_HAS_POWER_INIT void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, unsigned int cpu); +int acpi_processor_ffh_cstate_probe(unsigned int cpu, + struct acpi_processor_cx *cx, struct acpi_power_register *reg); +void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cstate); #else static inline void acpi_processor_power_init_bm_check(struct acpi_processor_flags @@ -214,6 +222,16 @@ static inline void acpi_processor_power_init_bm_check(struct flags->bm_check = 1; return; } +static inline int acpi_processor_ffh_cstate_probe(unsigned int cpu, + struct acpi_processor_cx *cx, struct acpi_power_register *reg) +{ + return -1; +} +static inline void acpi_processor_ffh_cstate_enter( + struct acpi_processor_cx *cstate) +{ + return; +} #endif /* in processor_perflib.c */ diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h index 2277127696d..e0ddca94d50 100644 --- a/include/asm-i386/processor.h +++ b/include/asm-i386/processor.h @@ -306,6 +306,8 @@ static inline void __mwait(unsigned long eax, unsigned long ecx) : :"a" (eax), "c" (ecx)); } +extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx); + /* from system description table in BIOS. Mostly for MCA use, but others may find it useful. */ extern unsigned int machine_id; diff --git a/include/asm-x86_64/processor.h b/include/asm-x86_64/processor.h index de9c3147ee4..cef17e0f828 100644 --- a/include/asm-x86_64/processor.h +++ b/include/asm-x86_64/processor.h @@ -475,6 +475,8 @@ static inline void __mwait(unsigned long eax, unsigned long ecx) : :"a" (eax), "c" (ecx)); } +extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx); + #define stack_current() \ ({ \ struct thread_info *ti; \ -- 2.11.4.GIT