From 79f203a26a07a9d5701c404925e85eb161b72cde Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Thu, 5 Aug 2010 17:01:07 -0400 Subject: [PATCH] USB: ssu100: remove duplicate #defines in ssu100 The ssu100 uses a TI16C550C UART so the SERIAL_ defines in this code are duplicates of those found in serial_reg.h. Remove the defines in ssu100.c and use the ones in the header file. Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ssu100.c | 86 ++++++++++++++++----------------------------- 1 file changed, 31 insertions(+), 55 deletions(-) diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index c7193880a2b..3c586b5790e 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #define QT_OPEN_CLOSE_CHANNEL 0xca @@ -27,36 +28,11 @@ #define QT_HW_FLOW_CONTROL_MASK 0xc5 #define QT_SW_FLOW_CONTROL_MASK 0xc6 -#define MODEM_CTL_REGISTER 0x04 -#define MODEM_STATUS_REGISTER 0x06 - - -#define SERIAL_LSR_OE 0x02 -#define SERIAL_LSR_PE 0x04 -#define SERIAL_LSR_FE 0x08 -#define SERIAL_LSR_BI 0x10 - -#define SERIAL_LSR_TEMT 0x40 - -#define SERIAL_MCR_DTR 0x01 -#define SERIAL_MCR_RTS 0x02 -#define SERIAL_MCR_LOOP 0x10 - -#define SERIAL_MSR_CTS 0x10 -#define SERIAL_MSR_CD 0x80 -#define SERIAL_MSR_RI 0x40 -#define SERIAL_MSR_DSR 0x20 #define SERIAL_MSR_MASK 0xf0 -#define SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS) - -#define SERIAL_8_DATA 0x03 -#define SERIAL_7_DATA 0x02 -#define SERIAL_6_DATA 0x01 -#define SERIAL_5_DATA 0x00 +#define SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS) -#define SERIAL_ODD_PARITY 0X08 -#define SERIAL_EVEN_PARITY 0X18 +#define SERIAL_EVEN_PARITY (UART_LCR_PARITY | UART_LCR_EPAR) #define MAX_BAUD_RATE 460800 @@ -153,7 +129,7 @@ static inline int ssu100_setregister(struct usb_device *dev, unsigned short uart, u16 data) { - u16 value = (data << 8) | MODEM_CTL_REGISTER; + u16 value = (data << 8) | UART_MCR; return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), QT_SET_GET_REGISTER, 0x40, value, uart, @@ -179,9 +155,9 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, clear &= ~set; /* 'set' takes precedence over 'clear' */ urb_value = 0; if (set & TIOCM_DTR) - urb_value |= SERIAL_MCR_DTR; + urb_value |= UART_MCR_DTR; if (set & TIOCM_RTS) - urb_value |= SERIAL_MCR_RTS; + urb_value |= UART_MCR_RTS; result = ssu100_setregister(dev, 0, urb_value); if (result < 0) @@ -265,24 +241,24 @@ static void ssu100_set_termios(struct tty_struct *tty, if (cflag & PARENB) { if (cflag & PARODD) - urb_value |= SERIAL_ODD_PARITY; + urb_value |= UART_LCR_PARITY; else urb_value |= SERIAL_EVEN_PARITY; } switch (cflag & CSIZE) { case CS5: - urb_value |= SERIAL_5_DATA; + urb_value |= UART_LCR_WLEN5; break; case CS6: - urb_value |= SERIAL_6_DATA; + urb_value |= UART_LCR_WLEN6; break; case CS7: - urb_value |= SERIAL_7_DATA; + urb_value |= UART_LCR_WLEN7; break; default: case CS8: - urb_value |= SERIAL_8_DATA; + urb_value |= UART_LCR_WLEN8; break; } @@ -353,11 +329,11 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) } spin_lock_irqsave(&priv->status_lock, flags); - priv->shadowLSR = data[0] & (SERIAL_LSR_OE | SERIAL_LSR_PE | - SERIAL_LSR_FE | SERIAL_LSR_BI); + priv->shadowLSR = data[0] & (UART_LSR_OE | UART_LSR_PE | + UART_LSR_FE | UART_LSR_BI); - priv->shadowMSR = data[1] & (SERIAL_MSR_CTS | SERIAL_MSR_DSR | - SERIAL_MSR_RI | SERIAL_MSR_CD); + priv->shadowMSR = data[1] & (UART_MSR_CTS | UART_MSR_DSR | + UART_MSR_RI | UART_MSR_DCD); spin_unlock_irqrestore(&priv->status_lock, flags); kfree(data); @@ -430,10 +406,10 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file, /* Return 0 if caller wanted to know about these bits */ - if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) || - ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) || - ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) || - ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS))) + if (((arg & TIOCM_RNG) && (diff & UART_MSR_RI)) || + ((arg & TIOCM_DSR) && (diff & UART_MSR_DSR)) || + ((arg & TIOCM_CD) && (diff & UART_MSR_DCD)) || + ((arg & TIOCM_CTS) && (diff & UART_MSR_CTS))) return 0; } } @@ -513,20 +489,20 @@ static int ssu100_tiocmget(struct tty_struct *tty, struct file *file) if (!d) return -ENOMEM; - r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d); + r = ssu100_getregister(dev, 0, UART_MCR, d); if (r < 0) goto mget_out; - r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1); + r = ssu100_getregister(dev, 0, UART_MSR, d+1); if (r < 0) goto mget_out; - r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) | - (d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) | - (d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) | - (d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) | - (d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) | - (d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0); + r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) | + (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) | + (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) | + (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) | + (d[1] & UART_MSR_RI ? TIOCM_RI : 0) | + (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0); mget_out: kfree(d); @@ -579,10 +555,10 @@ static int ssu100_process_packet(struct tty_struct *tty, (packet[0] == 0x1b) && (packet[1] == 0x1b) && ((packet[2] == 0x00) || (packet[2] == 0x01))) { if (packet[2] == 0x00) - priv->shadowLSR = packet[3] & (SERIAL_LSR_OE | - SERIAL_LSR_PE | - SERIAL_LSR_FE | - SERIAL_LSR_BI); + priv->shadowLSR = packet[3] & (UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE | + UART_LSR_BI); if (packet[2] == 0x01) { priv->shadowMSR = packet[3]; -- 2.11.4.GIT