From 722fdb33591bc7308a661913fb2f829128236b6f Mon Sep 17 00:00:00 2001 From: Philip Craig Date: Wed, 21 Jun 2006 11:33:27 +1000 Subject: [PATCH] [PATCH] 8139cp: add ethtool eeprom support Implement the ethtool eeprom operations for the 8139cp driver. Tested on x86 and big-endian ARM. Signed-off-by: Philip Craig Signed-off-by: Jeff Garzik --- drivers/net/8139cp.c | 179 +++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 167 insertions(+), 12 deletions(-) diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index b49be8f2c10..a26077a175a 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -401,6 +401,11 @@ static void cp_clean_rings (struct cp_private *cp); #ifdef CONFIG_NET_POLL_CONTROLLER static void cp_poll_controller(struct net_device *dev); #endif +static int cp_get_eeprom_len(struct net_device *dev); +static int cp_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data); +static int cp_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data); static struct pci_device_id cp_pci_tbl[] = { { PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139, @@ -1577,6 +1582,9 @@ static struct ethtool_ops cp_ethtool_ops = { .get_strings = cp_get_strings, .get_ethtool_stats = cp_get_ethtool_stats, .get_perm_addr = ethtool_op_get_perm_addr, + .get_eeprom_len = cp_get_eeprom_len, + .get_eeprom = cp_get_eeprom, + .set_eeprom = cp_set_eeprom, }; static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) @@ -1612,24 +1620,32 @@ static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) #define eeprom_delay() readl(ee_addr) /* The EEPROM commands include the alway-set leading bit. */ +#define EE_EXTEND_CMD (4) #define EE_WRITE_CMD (5) #define EE_READ_CMD (6) #define EE_ERASE_CMD (7) -static int read_eeprom (void __iomem *ioaddr, int location, int addr_len) -{ - int i; - unsigned retval = 0; - void __iomem *ee_addr = ioaddr + Cfg9346; - int read_cmd = location | (EE_READ_CMD << addr_len); +#define EE_EWDS_ADDR (0) +#define EE_WRAL_ADDR (1) +#define EE_ERAL_ADDR (2) +#define EE_EWEN_ADDR (3) + +#define CP_EEPROM_MAGIC PCI_DEVICE_ID_REALTEK_8139 +static void eeprom_cmd_start(void __iomem *ee_addr) +{ writeb (EE_ENB & ~EE_CS, ee_addr); writeb (EE_ENB, ee_addr); eeprom_delay (); +} - /* Shift the read command bits out. */ - for (i = 3 + addr_len - 1; i >= 0; i--) { - int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; +static void eeprom_cmd(void __iomem *ee_addr, int cmd, int cmd_len) +{ + int i; + + /* Shift the command bits out. */ + for (i = cmd_len - 1; i >= 0; i--) { + int dataval = (cmd & (1 << i)) ? EE_DATA_WRITE : 0; writeb (EE_ENB | dataval, ee_addr); eeprom_delay (); writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); @@ -1637,6 +1653,33 @@ static int read_eeprom (void __iomem *ioaddr, int location, int addr_len) } writeb (EE_ENB, ee_addr); eeprom_delay (); +} + +static void eeprom_cmd_end(void __iomem *ee_addr) +{ + writeb (~EE_CS, ee_addr); + eeprom_delay (); +} + +static void eeprom_extend_cmd(void __iomem *ee_addr, int extend_cmd, + int addr_len) +{ + int cmd = (EE_EXTEND_CMD << addr_len) | (extend_cmd << (addr_len - 2)); + + eeprom_cmd_start(ee_addr); + eeprom_cmd(ee_addr, cmd, 3 + addr_len); + eeprom_cmd_end(ee_addr); +} + +static u16 read_eeprom (void __iomem *ioaddr, int location, int addr_len) +{ + int i; + u16 retval = 0; + void __iomem *ee_addr = ioaddr + Cfg9346; + int read_cmd = location | (EE_READ_CMD << addr_len); + + eeprom_cmd_start(ee_addr); + eeprom_cmd(ee_addr, read_cmd, 3 + addr_len); for (i = 16; i > 0; i--) { writeb (EE_ENB | EE_SHIFT_CLK, ee_addr); @@ -1648,13 +1691,125 @@ static int read_eeprom (void __iomem *ioaddr, int location, int addr_len) eeprom_delay (); } - /* Terminate the EEPROM access. */ - writeb (~EE_CS, ee_addr); - eeprom_delay (); + eeprom_cmd_end(ee_addr); return retval; } +static void write_eeprom(void __iomem *ioaddr, int location, u16 val, + int addr_len) +{ + int i; + void __iomem *ee_addr = ioaddr + Cfg9346; + int write_cmd = location | (EE_WRITE_CMD << addr_len); + + eeprom_extend_cmd(ee_addr, EE_EWEN_ADDR, addr_len); + + eeprom_cmd_start(ee_addr); + eeprom_cmd(ee_addr, write_cmd, 3 + addr_len); + eeprom_cmd(ee_addr, val, 16); + eeprom_cmd_end(ee_addr); + + eeprom_cmd_start(ee_addr); + for (i = 0; i < 20000; i++) + if (readb(ee_addr) & EE_DATA_READ) + break; + eeprom_cmd_end(ee_addr); + + eeprom_extend_cmd(ee_addr, EE_EWDS_ADDR, addr_len); +} + +static int cp_get_eeprom_len(struct net_device *dev) +{ + struct cp_private *cp = netdev_priv(dev); + int size; + + spin_lock_irq(&cp->lock); + size = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 256 : 128; + spin_unlock_irq(&cp->lock); + + return size; +} + +static int cp_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct cp_private *cp = netdev_priv(dev); + unsigned int addr_len; + u16 val; + u32 offset = eeprom->offset >> 1; + u32 len = eeprom->len; + u32 i = 0; + + eeprom->magic = CP_EEPROM_MAGIC; + + spin_lock_irq(&cp->lock); + + addr_len = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 8 : 6; + + if (eeprom->offset & 1) { + val = read_eeprom(cp->regs, offset, addr_len); + data[i++] = (u8)(val >> 8); + offset++; + } + + while (i < len - 1) { + val = read_eeprom(cp->regs, offset, addr_len); + data[i++] = (u8)val; + data[i++] = (u8)(val >> 8); + offset++; + } + + if (i < len) { + val = read_eeprom(cp->regs, offset, addr_len); + data[i] = (u8)val; + } + + spin_unlock_irq(&cp->lock); + return 0; +} + +static int cp_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct cp_private *cp = netdev_priv(dev); + unsigned int addr_len; + u16 val; + u32 offset = eeprom->offset >> 1; + u32 len = eeprom->len; + u32 i = 0; + + if (eeprom->magic != CP_EEPROM_MAGIC) + return -EINVAL; + + spin_lock_irq(&cp->lock); + + addr_len = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 8 : 6; + + if (eeprom->offset & 1) { + val = read_eeprom(cp->regs, offset, addr_len) & 0xff; + val |= (u16)data[i++] << 8; + write_eeprom(cp->regs, offset, val, addr_len); + offset++; + } + + while (i < len - 1) { + val = (u16)data[i++]; + val |= (u16)data[i++] << 8; + write_eeprom(cp->regs, offset, val, addr_len); + offset++; + } + + if (i < len) { + val = read_eeprom(cp->regs, offset, addr_len) & 0xff00; + val |= (u16)data[i]; + write_eeprom(cp->regs, offset, val, addr_len); + } + + spin_unlock_irq(&cp->lock); + return 0; +} + /* Put the board into D3cold state and wait for WakeUp signal */ static void cp_set_d3_state (struct cp_private *cp) { -- 2.11.4.GIT