From 580537140568caddbc8a727d4c2f238d38707f68 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Jan 2010 22:18:56 -0700 Subject: [PATCH] microblaze: remove early_init_dt_scan_cpus() and phyp_dump_*() Microblaze only has one CPU, it isn't SMP at all. early_init_dt_scan_cpus() is effectively just a no-op, so remove it. Microblaze doesn't support hypervisor assisted dump either, so the phyp stuff can also go. Signed-off-by: Grant Likely Acked-by: Michal Simek --- arch/microblaze/kernel/prom.c | 153 ------------------------------------------ 1 file changed, 153 deletions(-) diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 6eff83a7121..cd158ef5b58 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -47,67 +47,6 @@ struct device_node *of_chosen; #define early_init_dt_scan_drconf_memory(node) 0 -static int __init early_init_dt_scan_cpus(unsigned long node, - const char *uname, int depth, - void *data) -{ - static int logical_cpuid; - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - const u32 *intserv; - int i, nthreads; - int found = 0; - - /* We are scanning "cpu" nodes only */ - if (type == NULL || strcmp(type, "cpu") != 0) - return 0; - - /* Get physical cpuid */ - intserv = of_get_flat_dt_prop(node, "reg", NULL); - nthreads = 1; - - /* - * Now see if any of these threads match our boot cpu. - * NOTE: This must match the parsing done in smp_setup_cpu_maps. - */ - for (i = 0; i < nthreads; i++) { - /* - * version 2 of the kexec param format adds the phys cpuid of - * booted proc. - */ - if (initial_boot_params && initial_boot_params->version >= 2) { - if (intserv[i] == - initial_boot_params->boot_cpuid_phys) { - found = 1; - break; - } - } else { - /* - * Check if it's the boot-cpu, set it's hw index now, - * unfortunately this format did not support booting - * off secondary threads. - */ - if (of_get_flat_dt_prop(node, - "linux,boot-cpu", NULL) != NULL) { - found = 1; - break; - } - } - -#ifdef CONFIG_SMP - /* logical cpu id is always 0 on UP kernels */ - logical_cpuid++; -#endif - } - - if (found) { - pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid, - intserv[i]); - boot_cpuid = logical_cpuid; - } - - return 0; -} - void __init early_init_dt_scan_chosen_arch(unsigned long node) { /* No Microblaze specific code here */ @@ -163,86 +102,6 @@ static int __init early_init_dt_scan_memory(unsigned long node, return 0; } -#ifdef CONFIG_PHYP_DUMP -/** - * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg - * - * Function to find the largest size we need to reserve - * during early boot process. - * - * It either looks for boot param and returns that OR - * returns larger of 256 or 5% rounded down to multiples of 256MB. - * - */ -static inline unsigned long phyp_dump_calculate_reserve_size(void) -{ - unsigned long tmp; - - if (phyp_dump_info->reserve_bootvar) - return phyp_dump_info->reserve_bootvar; - - /* divide by 20 to get 5% of value */ - tmp = lmb_end_of_DRAM(); - do_div(tmp, 20); - - /* round it down in multiples of 256 */ - tmp = tmp & ~0x0FFFFFFFUL; - - return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END); -} - -/** - * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory - * - * This routine may reserve memory regions in the kernel only - * if the system is supported and a dump was taken in last - * boot instance or if the hardware is supported and the - * scratch area needs to be setup. In other instances it returns - * without reserving anything. The memory in case of dump being - * active is freed when the dump is collected (by userland tools). - */ -static void __init phyp_dump_reserve_mem(void) -{ - unsigned long base, size; - unsigned long variable_reserve_size; - - if (!phyp_dump_info->phyp_dump_configured) { - printk(KERN_ERR "Phyp-dump not supported on this hardware\n"); - return; - } - - if (!phyp_dump_info->phyp_dump_at_boot) { - printk(KERN_INFO "Phyp-dump disabled at boot time\n"); - return; - } - - variable_reserve_size = phyp_dump_calculate_reserve_size(); - - if (phyp_dump_info->phyp_dump_is_active) { - /* Reserve *everything* above RMR.Area freed by userland tools*/ - base = variable_reserve_size; - size = lmb_end_of_DRAM() - base; - - /* XXX crashed_ram_end is wrong, since it may be beyond - * the memory_limit, it will need to be adjusted. */ - lmb_reserve(base, size); - - phyp_dump_info->init_reserve_start = base; - phyp_dump_info->init_reserve_size = size; - } else { - size = phyp_dump_info->cpu_state_size + - phyp_dump_info->hpte_region_size + - variable_reserve_size; - base = lmb_end_of_DRAM() - size; - lmb_reserve(base, size); - phyp_dump_info->init_reserve_start = base; - phyp_dump_info->init_reserve_size = size; - } -} -#else -static inline void __init phyp_dump_reserve_mem(void) {} -#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ - #ifdef CONFIG_EARLY_PRINTK /* MS this is Microblaze specifig function */ static int __init early_init_dt_scan_serial(unsigned long node, @@ -284,11 +143,6 @@ void __init early_init_devtree(void *params) /* Setup flat device-tree pointer */ initial_boot_params = params; -#ifdef CONFIG_PHYP_DUMP - /* scan tree to see if dump occured during last boot */ - of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); -#endif - /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... @@ -308,13 +162,6 @@ void __init early_init_devtree(void *params) pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size()); - pr_debug("Scanning CPUs ...\n"); - - /* Retreive CPU related informations from the flat tree - * (altivec support, boot CPU ID, ...) - */ - of_scan_flat_dt(early_init_dt_scan_cpus, NULL); - pr_debug(" <- early_init_devtree()\n"); } -- 2.11.4.GIT