From 43eab87828fee65f89f4088736b2b7a187390a2f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Sat, 13 Nov 2010 19:04:32 +0000 Subject: [PATCH] ARM: perf: separate PMU backends into multiple files The ARM perf_event.c file contains all PMU backends and, as new PMUs are introduced, will continue to grow. This patch follows the example of x86 and splits the PMU implementations into separate files which are then #included back into the main file. Compile-time guards are added to each PMU file to avoid compiling in code that is not relevant for the version of the architecture which we are targetting. Acked-by: Jean Pihet Signed-off-by: Will Deacon --- arch/arm/kernel/perf_event.c | 3837 +++++++---------------------------- arch/arm/kernel/perf_event_v6.c | 672 ++++++ arch/arm/kernel/perf_event_v7.c | 906 +++++++++ arch/arm/kernel/perf_event_xscale.c | 807 ++++++++ 4 files changed, 3130 insertions(+), 3092 deletions(-) rewrite arch/arm/kernel/perf_event.c (79%) create mode 100644 arch/arm/kernel/perf_event_v6.c create mode 100644 arch/arm/kernel/perf_event_v7.c create mode 100644 arch/arm/kernel/perf_event_xscale.c diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c dissimilarity index 79% index ac4e9a1ed80..421a4bb88fe 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -1,3092 +1,745 @@ -#undef DEBUG - -/* - * ARM performance counter support. - * - * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles - * - * ARMv7 support: Jean Pihet - * 2010 (c) MontaVista Software, LLC. - * - * This code is based on the sparc64 perf event code, which is in turn based - * on the x86 code. Callchain code is based on the ARM OProfile backtrace - * code. - */ -#define pr_fmt(fmt) "hw perfevents: " fmt - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -static struct platform_device *pmu_device; - -/* - * Hardware lock to serialize accesses to PMU registers. Needed for the - * read/modify/write sequences. - */ -DEFINE_SPINLOCK(pmu_lock); - -/* - * ARMv6 supports a maximum of 3 events, starting from index 1. If we add - * another platform that supports more, we need to increase this to be the - * largest of all platforms. - * - * ARMv7 supports up to 32 events: - * cycle counter CCNT + 31 events counters CNT0..30. - * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters. - */ -#define ARMPMU_MAX_HWEVENTS 33 - -/* The events for a given CPU. */ -struct cpu_hw_events { - /* - * The events that are active on the CPU for the given index. Index 0 - * is reserved. - */ - struct perf_event *events[ARMPMU_MAX_HWEVENTS]; - - /* - * A 1 bit for an index indicates that the counter is being used for - * an event. A 0 means that the counter can be used. - */ - unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; - - /* - * A 1 bit for an index indicates that the counter is actively being - * used. - */ - unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; -}; -DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); - -struct arm_pmu { - enum arm_perf_pmu_ids id; - const char *name; - irqreturn_t (*handle_irq)(int irq_num, void *dev); - void (*enable)(struct hw_perf_event *evt, int idx); - void (*disable)(struct hw_perf_event *evt, int idx); - int (*get_event_idx)(struct cpu_hw_events *cpuc, - struct hw_perf_event *hwc); - u32 (*read_counter)(int idx); - void (*write_counter)(int idx, u32 val); - void (*start)(void); - void (*stop)(void); - const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; - const unsigned (*event_map)[PERF_COUNT_HW_MAX]; - u32 raw_event_mask; - int num_events; - u64 max_period; -}; - -/* Set at runtime when we know what CPU type we are. */ -static const struct arm_pmu *armpmu; - -enum arm_perf_pmu_ids -armpmu_get_pmu_id(void) -{ - int id = -ENODEV; - - if (armpmu != NULL) - id = armpmu->id; - - return id; -} -EXPORT_SYMBOL_GPL(armpmu_get_pmu_id); - -int -armpmu_get_max_events(void) -{ - int max_events = 0; - - if (armpmu != NULL) - max_events = armpmu->num_events; - - return max_events; -} -EXPORT_SYMBOL_GPL(armpmu_get_max_events); - -int perf_num_counters(void) -{ - return armpmu_get_max_events(); -} -EXPORT_SYMBOL_GPL(perf_num_counters); - -#define HW_OP_UNSUPPORTED 0xFFFF - -#define C(_x) \ - PERF_COUNT_HW_CACHE_##_x - -#define CACHE_OP_UNSUPPORTED 0xFFFF - -static int -armpmu_map_cache_event(u64 config) -{ - unsigned int cache_type, cache_op, cache_result, ret; - - cache_type = (config >> 0) & 0xff; - if (cache_type >= PERF_COUNT_HW_CACHE_MAX) - return -EINVAL; - - cache_op = (config >> 8) & 0xff; - if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) - return -EINVAL; - - cache_result = (config >> 16) & 0xff; - if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) - return -EINVAL; - - ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result]; - - if (ret == CACHE_OP_UNSUPPORTED) - return -ENOENT; - - return ret; -} - -static int -armpmu_map_event(u64 config) -{ - int mapping = (*armpmu->event_map)[config]; - return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping; -} - -static int -armpmu_map_raw_event(u64 config) -{ - return (int)(config & armpmu->raw_event_mask); -} - -static int -armpmu_event_set_period(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) -{ - s64 left = local64_read(&hwc->period_left); - s64 period = hwc->sample_period; - int ret = 0; - - if (unlikely(left <= -period)) { - left = period; - local64_set(&hwc->period_left, left); - hwc->last_period = period; - ret = 1; - } - - if (unlikely(left <= 0)) { - left += period; - local64_set(&hwc->period_left, left); - hwc->last_period = period; - ret = 1; - } - - if (left > (s64)armpmu->max_period) - left = armpmu->max_period; - - local64_set(&hwc->prev_count, (u64)-left); - - armpmu->write_counter(idx, (u64)(-left) & 0xffffffff); - - perf_event_update_userpage(event); - - return ret; -} - -static u64 -armpmu_event_update(struct perf_event *event, - struct hw_perf_event *hwc, - int idx) -{ - int shift = 64 - 32; - s64 prev_raw_count, new_raw_count; - u64 delta; - -again: - prev_raw_count = local64_read(&hwc->prev_count); - new_raw_count = armpmu->read_counter(idx); - - if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, - new_raw_count) != prev_raw_count) - goto again; - - delta = (new_raw_count << shift) - (prev_raw_count << shift); - delta >>= shift; - - local64_add(delta, &event->count); - local64_sub(delta, &hwc->period_left); - - return new_raw_count; -} - -static void -armpmu_read(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - - /* Don't read disabled counters! */ - if (hwc->idx < 0) - return; - - armpmu_event_update(event, hwc, hwc->idx); -} - -static void -armpmu_stop(struct perf_event *event, int flags) -{ - struct hw_perf_event *hwc = &event->hw; - - if (!armpmu) - return; - - /* - * ARM pmu always has to update the counter, so ignore - * PERF_EF_UPDATE, see comments in armpmu_start(). - */ - if (!(hwc->state & PERF_HES_STOPPED)) { - armpmu->disable(hwc, hwc->idx); - barrier(); /* why? */ - armpmu_event_update(event, hwc, hwc->idx); - hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; - } -} - -static void -armpmu_start(struct perf_event *event, int flags) -{ - struct hw_perf_event *hwc = &event->hw; - - if (!armpmu) - return; - - /* - * ARM pmu always has to reprogram the period, so ignore - * PERF_EF_RELOAD, see the comment below. - */ - if (flags & PERF_EF_RELOAD) - WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); - - hwc->state = 0; - /* - * Set the period again. Some counters can't be stopped, so when we - * were stopped we simply disabled the IRQ source and the counter - * may have been left counting. If we don't do this step then we may - * get an interrupt too soon or *way* too late if the overflow has - * happened since disabling. - */ - armpmu_event_set_period(event, hwc, hwc->idx); - armpmu->enable(hwc, hwc->idx); -} - -static void -armpmu_del(struct perf_event *event, int flags) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - WARN_ON(idx < 0); - - clear_bit(idx, cpuc->active_mask); - armpmu_stop(event, PERF_EF_UPDATE); - cpuc->events[idx] = NULL; - clear_bit(idx, cpuc->used_mask); - - perf_event_update_userpage(event); -} - -static int -armpmu_add(struct perf_event *event, int flags) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - struct hw_perf_event *hwc = &event->hw; - int idx; - int err = 0; - - perf_pmu_disable(event->pmu); - - /* If we don't have a space for the counter then finish early. */ - idx = armpmu->get_event_idx(cpuc, hwc); - if (idx < 0) { - err = idx; - goto out; - } - - /* - * If there is an event in the counter we are going to use then make - * sure it is disabled. - */ - event->hw.idx = idx; - armpmu->disable(hwc, idx); - cpuc->events[idx] = event; - set_bit(idx, cpuc->active_mask); - - hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; - if (flags & PERF_EF_START) - armpmu_start(event, PERF_EF_RELOAD); - - /* Propagate our changes to the userspace mapping. */ - perf_event_update_userpage(event); - -out: - perf_pmu_enable(event->pmu); - return err; -} - -static struct pmu pmu; - -static int -validate_event(struct cpu_hw_events *cpuc, - struct perf_event *event) -{ - struct hw_perf_event fake_event = event->hw; - - if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) - return 1; - - return armpmu->get_event_idx(cpuc, &fake_event) >= 0; -} - -static int -validate_group(struct perf_event *event) -{ - struct perf_event *sibling, *leader = event->group_leader; - struct cpu_hw_events fake_pmu; - - memset(&fake_pmu, 0, sizeof(fake_pmu)); - - if (!validate_event(&fake_pmu, leader)) - return -ENOSPC; - - list_for_each_entry(sibling, &leader->sibling_list, group_entry) { - if (!validate_event(&fake_pmu, sibling)) - return -ENOSPC; - } - - if (!validate_event(&fake_pmu, event)) - return -ENOSPC; - - return 0; -} - -static int -armpmu_reserve_hardware(void) -{ - int i, err = -ENODEV, irq; - - pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); - if (IS_ERR(pmu_device)) { - pr_warning("unable to reserve pmu\n"); - return PTR_ERR(pmu_device); - } - - init_pmu(ARM_PMU_DEVICE_CPU); - - if (pmu_device->num_resources < 1) { - pr_err("no irqs for PMUs defined\n"); - return -ENODEV; - } - - for (i = 0; i < pmu_device->num_resources; ++i) { - irq = platform_get_irq(pmu_device, i); - if (irq < 0) - continue; - - err = request_irq(irq, armpmu->handle_irq, - IRQF_DISABLED | IRQF_NOBALANCING, - "armpmu", NULL); - if (err) { - pr_warning("unable to request IRQ%d for ARM perf " - "counters\n", irq); - break; - } - } - - if (err) { - for (i = i - 1; i >= 0; --i) { - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) - free_irq(irq, NULL); - } - release_pmu(pmu_device); - pmu_device = NULL; - } - - return err; -} - -static void -armpmu_release_hardware(void) -{ - int i, irq; - - for (i = pmu_device->num_resources - 1; i >= 0; --i) { - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) - free_irq(irq, NULL); - } - armpmu->stop(); - - release_pmu(pmu_device); - pmu_device = NULL; -} - -static atomic_t active_events = ATOMIC_INIT(0); -static DEFINE_MUTEX(pmu_reserve_mutex); - -static void -hw_perf_event_destroy(struct perf_event *event) -{ - if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) { - armpmu_release_hardware(); - mutex_unlock(&pmu_reserve_mutex); - } -} - -static int -__hw_perf_event_init(struct perf_event *event) -{ - struct hw_perf_event *hwc = &event->hw; - int mapping, err; - - /* Decode the generic type into an ARM event identifier. */ - if (PERF_TYPE_HARDWARE == event->attr.type) { - mapping = armpmu_map_event(event->attr.config); - } else if (PERF_TYPE_HW_CACHE == event->attr.type) { - mapping = armpmu_map_cache_event(event->attr.config); - } else if (PERF_TYPE_RAW == event->attr.type) { - mapping = armpmu_map_raw_event(event->attr.config); - } else { - pr_debug("event type %x not supported\n", event->attr.type); - return -EOPNOTSUPP; - } - - if (mapping < 0) { - pr_debug("event %x:%llx not supported\n", event->attr.type, - event->attr.config); - return mapping; - } - - /* - * Check whether we need to exclude the counter from certain modes. - * The ARM performance counters are on all of the time so if someone - * has asked us for some excludes then we have to fail. - */ - if (event->attr.exclude_kernel || event->attr.exclude_user || - event->attr.exclude_hv || event->attr.exclude_idle) { - pr_debug("ARM performance counters do not support " - "mode exclusion\n"); - return -EPERM; - } - - /* - * We don't assign an index until we actually place the event onto - * hardware. Use -1 to signify that we haven't decided where to put it - * yet. For SMP systems, each core has it's own PMU so we can't do any - * clever allocation or constraints checking at this point. - */ - hwc->idx = -1; - - /* - * Store the event encoding into the config_base field. config and - * event_base are unused as the only 2 things we need to know are - * the event mapping and the counter to use. The counter to use is - * also the indx and the config_base is the event type. - */ - hwc->config_base = (unsigned long)mapping; - hwc->config = 0; - hwc->event_base = 0; - - if (!hwc->sample_period) { - hwc->sample_period = armpmu->max_period; - hwc->last_period = hwc->sample_period; - local64_set(&hwc->period_left, hwc->sample_period); - } - - err = 0; - if (event->group_leader != event) { - err = validate_group(event); - if (err) - return -EINVAL; - } - - return err; -} - -static int armpmu_event_init(struct perf_event *event) -{ - int err = 0; - - switch (event->attr.type) { - case PERF_TYPE_RAW: - case PERF_TYPE_HARDWARE: - case PERF_TYPE_HW_CACHE: - break; - - default: - return -ENOENT; - } - - if (!armpmu) - return -ENODEV; - - event->destroy = hw_perf_event_destroy; - - if (!atomic_inc_not_zero(&active_events)) { - if (atomic_read(&active_events) > armpmu->num_events) { - atomic_dec(&active_events); - return -ENOSPC; - } - - mutex_lock(&pmu_reserve_mutex); - if (atomic_read(&active_events) == 0) { - err = armpmu_reserve_hardware(); - } - - if (!err) - atomic_inc(&active_events); - mutex_unlock(&pmu_reserve_mutex); - } - - if (err) - return err; - - err = __hw_perf_event_init(event); - if (err) - hw_perf_event_destroy(event); - - return err; -} - -static void armpmu_enable(struct pmu *pmu) -{ - /* Enable all of the perf events on hardware. */ - int idx; - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - - if (!armpmu) - return; - - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - - if (!event) - continue; - - armpmu->enable(&event->hw, idx); - } - - armpmu->start(); -} - -static void armpmu_disable(struct pmu *pmu) -{ - if (armpmu) - armpmu->stop(); -} - -static struct pmu pmu = { - .pmu_enable = armpmu_enable, - .pmu_disable = armpmu_disable, - .event_init = armpmu_event_init, - .add = armpmu_add, - .del = armpmu_del, - .start = armpmu_start, - .stop = armpmu_stop, - .read = armpmu_read, -}; - -/* - * ARMv6 Performance counter handling code. - * - * ARMv6 has 2 configurable performance counters and a single cycle counter. - * They all share a single reset bit but can be written to zero so we can use - * that for a reset. - * - * The counters can't be individually enabled or disabled so when we remove - * one event and replace it with another we could get spurious counts from the - * wrong event. However, we can take advantage of the fact that the - * performance counters can export events to the event bus, and the event bus - * itself can be monitored. This requires that we *don't* export the events to - * the event bus. The procedure for disabling a configurable counter is: - * - change the counter to count the ETMEXTOUT[0] signal (0x20). This - * effectively stops the counter from counting. - * - disable the counter's interrupt generation (each counter has it's - * own interrupt enable bit). - * Once stopped, the counter value can be written as 0 to reset. - * - * To enable a counter: - * - enable the counter's interrupt generation. - * - set the new event type. - * - * Note: the dedicated cycle counter only counts cycles and can't be - * enabled/disabled independently of the others. When we want to disable the - * cycle counter, we have to just disable the interrupt reporting and start - * ignoring that counter. When re-enabling, we have to reset the value and - * enable the interrupt. - */ - -enum armv6_perf_types { - ARMV6_PERFCTR_ICACHE_MISS = 0x0, - ARMV6_PERFCTR_IBUF_STALL = 0x1, - ARMV6_PERFCTR_DDEP_STALL = 0x2, - ARMV6_PERFCTR_ITLB_MISS = 0x3, - ARMV6_PERFCTR_DTLB_MISS = 0x4, - ARMV6_PERFCTR_BR_EXEC = 0x5, - ARMV6_PERFCTR_BR_MISPREDICT = 0x6, - ARMV6_PERFCTR_INSTR_EXEC = 0x7, - ARMV6_PERFCTR_DCACHE_HIT = 0x9, - ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, - ARMV6_PERFCTR_DCACHE_MISS = 0xB, - ARMV6_PERFCTR_DCACHE_WBACK = 0xC, - ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, - ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, - ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, - ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, - ARMV6_PERFCTR_WBUF_DRAINED = 0x12, - ARMV6_PERFCTR_CPU_CYCLES = 0xFF, - ARMV6_PERFCTR_NOP = 0x20, -}; - -enum armv6_counters { - ARMV6_CYCLE_COUNTER = 1, - ARMV6_COUNTER0, - ARMV6_COUNTER1, -}; - -/* - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -enum armv6mpcore_perf_types { - ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0, - ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1, - ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2, - ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3, - ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4, - ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5, - ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6, - ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7, - ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8, - ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA, - ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB, - ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC, - ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD, - ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE, - ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF, - ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10, - ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11, - ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12, - ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13, - ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF, -}; - -/* - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -static inline unsigned long -armv6_pmcr_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); - return val; -} - -static inline void -armv6_pmcr_write(unsigned long val) -{ - asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); -} - -#define ARMV6_PMCR_ENABLE (1 << 0) -#define ARMV6_PMCR_CTR01_RESET (1 << 1) -#define ARMV6_PMCR_CCOUNT_RESET (1 << 2) -#define ARMV6_PMCR_CCOUNT_DIV (1 << 3) -#define ARMV6_PMCR_COUNT0_IEN (1 << 4) -#define ARMV6_PMCR_COUNT1_IEN (1 << 5) -#define ARMV6_PMCR_CCOUNT_IEN (1 << 6) -#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) -#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) -#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) -#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 -#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) -#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 -#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) - -#define ARMV6_PMCR_OVERFLOWED_MASK \ - (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ - ARMV6_PMCR_CCOUNT_OVERFLOW) - -static inline int -armv6_pmcr_has_overflowed(unsigned long pmcr) -{ - return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK); -} - -static inline int -armv6_pmcr_counter_has_overflowed(unsigned long pmcr, - enum armv6_counters counter) -{ - int ret = 0; - - if (ARMV6_CYCLE_COUNTER == counter) - ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; - else if (ARMV6_COUNTER0 == counter) - ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; - else if (ARMV6_COUNTER1 == counter) - ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - - return ret; -} - -static inline u32 -armv6pmu_read_counter(int counter) -{ - unsigned long value = 0; - - if (ARMV6_CYCLE_COUNTER == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); - else if (ARMV6_COUNTER0 == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); - else if (ARMV6_COUNTER1 == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - - return value; -} - -static inline void -armv6pmu_write_counter(int counter, - u32 value) -{ - if (ARMV6_CYCLE_COUNTER == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); - else if (ARMV6_COUNTER0 == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); - else if (ARMV6_COUNTER1 == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); -} - -void -armv6pmu_enable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, evt, flags; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = 0; - evt = ARMV6_PMCR_CCOUNT_IEN; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_EVT_COUNT0_MASK; - evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | - ARMV6_PMCR_COUNT0_IEN; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_EVT_COUNT1_MASK; - evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | - ARMV6_PMCR_COUNT1_IEN; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Mask out the current event and set the counter to count the event - * that we're interested in. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static irqreturn_t -armv6pmu_handle_irq(int irq_num, - void *dev) -{ - unsigned long pmcr = armv6_pmcr_read(); - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - if (!armv6_pmcr_has_overflowed(pmcr)) - return IRQ_NONE; - - regs = get_irq_regs(); - - /* - * The interrupts are cleared by writing the overflow flags back to - * the control register. All of the other bits don't have any effect - * if they are rewritten, so write the whole value back. - */ - armv6_pmcr_write(pmcr); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - /* - * Handle the pending perf events. - * - * Note: this call *must* be run with interrupts disabled. For - * platforms that can have the PMU interrupts raised as an NMI, this - * will not work. - */ - irq_work_run(); - - return IRQ_HANDLED; -} - -static void -armv6pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val |= ARMV6_PMCR_ENABLE; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -armv6pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~ARMV6_PMCR_ENABLE; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static int -armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - /* Always place a cycle counter into the cycle counter. */ - if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { - if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return ARMV6_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * counter0 and counter1. - */ - if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) { - return ARMV6_COUNTER1; - } - - if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) { - return ARMV6_COUNTER0; - } - - /* The counters are all in use. */ - return -EAGAIN; - } -} - -static void -armv6pmu_disable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, evt, flags; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = ARMV6_PMCR_CCOUNT_IEN; - evt = 0; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; - evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; - evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Mask out the current event and set the counter to count the number - * of ETM bus signal assertion cycles. The external reporting should - * be disabled and so this should never increment. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, flags, evt = 0; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = ARMV6_PMCR_CCOUNT_IEN; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_COUNT0_IEN; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_COUNT1_IEN; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Unlike UP ARMv6, we don't have a way of stopping the counters. We - * simply disable the interrupt reporting. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static const struct arm_pmu armv6pmu = { - .id = ARM_PERF_PMU_ID_V6, - .name = "v6", - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6pmu_disable_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .cache_map = &armv6_perf_cache_map, - .event_map = &armv6_perf_map, - .raw_event_mask = 0xFF, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -const struct arm_pmu *__init armv6pmu_init(void) -{ - return &armv6pmu; -} - -/* - * ARMv6mpcore is almost identical to single core ARMv6 with the exception - * that some of the events have different enumerations and that there is no - * *hack* to stop the programmable counters. To stop the counters we simply - * disable the interrupt reporting and update the event. When unthrottling we - * reset the period and enable the interrupt reporting. - */ -static const struct arm_pmu armv6mpcore_pmu = { - .id = ARM_PERF_PMU_ID_V6MP, - .name = "v6mpcore", - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6mpcore_pmu_disable_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .cache_map = &armv6mpcore_perf_cache_map, - .event_map = &armv6mpcore_perf_map, - .raw_event_mask = 0xFF, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -const struct arm_pmu *__init armv6mpcore_pmu_init(void) -{ - return &armv6mpcore_pmu; -} - -/* - * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code. - * - * Copied from ARMv6 code, with the low level code inspired - * by the ARMv7 Oprofile code. - * - * Cortex-A8 has up to 4 configurable performance counters and - * a single cycle counter. - * Cortex-A9 has up to 31 configurable performance counters and - * a single cycle counter. - * - * All counters can be enabled/disabled and IRQ masked separately. The cycle - * counter and all 4 performance counters together can be reset separately. - */ - -/* Common ARMv7 event types */ -enum armv7_perf_types { - ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, - ARMV7_PERFCTR_IFETCH_MISS = 0x01, - ARMV7_PERFCTR_ITLB_MISS = 0x02, - ARMV7_PERFCTR_DCACHE_REFILL = 0x03, - ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, - ARMV7_PERFCTR_DTLB_REFILL = 0x05, - ARMV7_PERFCTR_DREAD = 0x06, - ARMV7_PERFCTR_DWRITE = 0x07, - - ARMV7_PERFCTR_EXC_TAKEN = 0x09, - ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, - ARMV7_PERFCTR_CID_WRITE = 0x0B, - /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. - * It counts: - * - all branch instructions, - * - instructions that explicitly write the PC, - * - exception generating instructions. - */ - ARMV7_PERFCTR_PC_WRITE = 0x0C, - ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, - ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, - ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, - ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, - - ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12, - - ARMV7_PERFCTR_CPU_CYCLES = 0xFF -}; - -/* ARMv7 Cortex-A8 specific event types */ -enum armv7_a8_perf_types { - ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, - - ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, - - ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, - ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, - ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, - ARMV7_PERFCTR_L2_ACCESS = 0x43, - ARMV7_PERFCTR_L2_CACH_MISS = 0x44, - ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45, - ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46, - ARMV7_PERFCTR_MEMORY_REPLAY = 0x47, - ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48, - ARMV7_PERFCTR_L1_DATA_MISS = 0x49, - ARMV7_PERFCTR_L1_INST_MISS = 0x4A, - ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B, - ARMV7_PERFCTR_L1_NEON_DATA = 0x4C, - ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D, - ARMV7_PERFCTR_L2_NEON = 0x4E, - ARMV7_PERFCTR_L2_NEON_HIT = 0x4F, - ARMV7_PERFCTR_L1_INST = 0x50, - ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51, - ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52, - ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53, - ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54, - ARMV7_PERFCTR_OP_EXECUTED = 0x55, - ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56, - ARMV7_PERFCTR_CYCLES_INST = 0x57, - ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58, - ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59, - ARMV7_PERFCTR_NEON_CYCLES = 0x5A, - - ARMV7_PERFCTR_PMU0_EVENTS = 0x70, - ARMV7_PERFCTR_PMU1_EVENTS = 0x71, - ARMV7_PERFCTR_PMU_EVENTS = 0x72, -}; - -/* ARMv7 Cortex-A9 specific event types */ -enum armv7_a9_perf_types { - ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40, - ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41, - ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42, - - ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50, - ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51, - - ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60, - ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61, - ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62, - ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63, - ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64, - ARMV7_PERFCTR_DATA_EVICTION = 0x65, - ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66, - ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67, - ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68, - - ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E, - - ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70, - ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71, - ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72, - ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73, - ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74, - - ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80, - ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81, - ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82, - ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83, - ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84, - ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85, - ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86, - - ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A, - ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B, - - ARMV7_PERFCTR_ISB_INST = 0x90, - ARMV7_PERFCTR_DSB_INST = 0x91, - ARMV7_PERFCTR_DMB_INST = 0x92, - ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93, - - ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0, - ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1, - ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2, - ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3, - ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4, - ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 -}; - -/* - * Cortex-A8 HW events mapping - * - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * Only ITLB misses and DTLB refills are supported. - * If users want the DTLB refills misses a raw counter - * must be used. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -/* - * Cortex-A9 HW events mapping - */ -static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = - ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * Only ITLB misses and DTLB refills are supported. - * If users want the DTLB refills misses a raw counter - * must be used. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -/* - * Perf Events counters - */ -enum armv7_counters { - ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ - ARMV7_COUNTER0 = 2, /* First event counter */ -}; - -/* - * The cycle counter is ARMV7_CYCLE_COUNTER. - * The first event counter is ARMV7_COUNTER0. - * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). - */ -#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) - -/* - * ARMv7 low level PMNC access - */ - -/* - * Per-CPU PMNC: config reg - */ -#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ -#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ -#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ -#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ -#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ -#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ -#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ -#define ARMV7_PMNC_N_MASK 0x1f -#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ - -/* - * Available counters - */ -#define ARMV7_CNT0 0 /* First event counter */ -#define ARMV7_CCNT 31 /* Cycle counter */ - -/* Perf Event to low level counters mapping */ -#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) - -/* - * CNTENS: counters enable reg - */ -#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENS_C (1 << ARMV7_CCNT) - -/* - * CNTENC: counters disable reg - */ -#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENC_C (1 << ARMV7_CCNT) - -/* - * INTENS: counters overflow interrupt enable reg - */ -#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENS_C (1 << ARMV7_CCNT) - -/* - * INTENC: counters overflow interrupt disable reg - */ -#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENC_C (1 << ARMV7_CCNT) - -/* - * EVTSEL: Event selection reg - */ -#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ - -/* - * SELECT: Counter selection reg - */ -#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ - -/* - * FLAG: counters overflow flag status reg - */ -#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_FLAG_C (1 << ARMV7_CCNT) -#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ -#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK - -static inline unsigned long armv7_pmnc_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); - return val; -} - -static inline void armv7_pmnc_write(unsigned long val) -{ - val &= ARMV7_PMNC_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); -} - -static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) -{ - return pmnc & ARMV7_OVERFLOWED_MASK; -} - -static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, - enum armv7_counters counter) -{ - int ret = 0; - - if (counter == ARMV7_CYCLE_COUNTER) - ret = pmnc & ARMV7_FLAG_C; - else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) - ret = pmnc & ARMV7_FLAG_P(counter); - else - pr_err("CPU%u checking wrong counter %d overflow status\n", - smp_processor_id(), counter); - - return ret; -} - -static inline int armv7_pmnc_select_counter(unsigned int idx) -{ - u32 val; - - if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { - pr_err("CPU%u selecting wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); - - return idx; -} - -static inline u32 armv7pmu_read_counter(int idx) -{ - unsigned long value = 0; - - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mrc p15, 0, %0, c9, c13, 2" - : "=r" (value)); - } else - pr_err("CPU%u reading wrong counter %d\n", - smp_processor_id(), idx); - - return value; -} - -static inline void armv7pmu_write_counter(int idx, u32 value) -{ - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mcr p15, 0, %0, c9, c13, 2" - : : "r" (value)); - } else - pr_err("CPU%u writing wrong counter %d\n", - smp_processor_id(), idx); -} - -static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) -{ - if (armv7_pmnc_select_counter(idx) == idx) { - val &= ARMV7_EVTSEL_MASK; - asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); - } -} - -static inline u32 armv7_pmnc_enable_counter(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENS_C; - else - val = ARMV7_CNTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_disable_counter(unsigned int idx) -{ - u32 val; - - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENC_C; - else - val = ARMV7_CNTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_enable_intens(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENS_C; - else - val = ARMV7_INTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_disable_intens(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENC_C; - else - val = ARMV7_INTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_getreset_flags(void) -{ - u32 val; - - /* Read */ - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - - /* Write to clear flags */ - val &= ARMV7_FLAG_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); - - return val; -} - -#ifdef DEBUG -static void armv7_pmnc_dump_regs(void) -{ - u32 val; - unsigned int cnt; - - printk(KERN_INFO "PMNC registers dump:\n"); - - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); - printk(KERN_INFO "PMNC =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); - printk(KERN_INFO "CNTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); - printk(KERN_INFO "INTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - printk(KERN_INFO "FLAGS =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); - printk(KERN_INFO "SELECT=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); - printk(KERN_INFO "CCNT =0x%08x\n", val); - - for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { - armv7_pmnc_select_counter(cnt); - asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); - printk(KERN_INFO "CNT[%d] count =0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); - asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); - printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); - } -} -#endif - -void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags; - - /* - * Enable counter and interrupt, and set the counter to count - * the event that we're interested in. - */ - spin_lock_irqsave(&pmu_lock, flags); - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(idx); - - /* - * Set event (if destined for PMNx counters) - * We don't need to set the event if it's a cycle count - */ - if (idx != ARMV7_CYCLE_COUNTER) - armv7_pmnc_write_evtsel(idx, hwc->config_base); - - /* - * Enable interrupt for this counter - */ - armv7_pmnc_enable_intens(idx); - - /* - * Enable counter - */ - armv7_pmnc_enable_counter(idx); - - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags; - - /* - * Disable counter and interrupt - */ - spin_lock_irqsave(&pmu_lock, flags); - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(idx); - - /* - * Disable interrupt for this counter - */ - armv7_pmnc_disable_intens(idx); - - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* - * Get and reset the IRQ flags - */ - pmnc = armv7_pmnc_getreset_flags(); - - /* - * Did an overflow occur? - */ - if (!armv7_pmnc_has_overflowed(pmnc)) - return IRQ_NONE; - - /* - * Handle the counter(s) overflow(s) - */ - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv7_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - /* - * Handle the pending perf events. - * - * Note: this call *must* be run with interrupts disabled. For - * platforms that can have the PMU interrupts raised as an NMI, this - * will not work. - */ - irq_work_run(); - - return IRQ_HANDLED; -} - -static void armv7pmu_start(void) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_lock, flags); - /* Enable all counters */ - armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void armv7pmu_stop(void) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_lock, flags); - /* Disable all counters */ - armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - int idx; - - /* Always place a cycle counter into the cycle counter. */ - if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { - if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return ARMV7_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * the events counters - */ - for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { - if (!test_and_set_bit(idx, cpuc->used_mask)) - return idx; - } - - /* The counters are all in use. */ - return -EAGAIN; - } -} - -static struct arm_pmu armv7pmu = { - .handle_irq = armv7pmu_handle_irq, - .enable = armv7pmu_enable_event, - .disable = armv7pmu_disable_event, - .read_counter = armv7pmu_read_counter, - .write_counter = armv7pmu_write_counter, - .get_event_idx = armv7pmu_get_event_idx, - .start = armv7pmu_start, - .stop = armv7pmu_stop, - .raw_event_mask = 0xFF, - .max_period = (1LLU << 32) - 1, -}; - -static u32 __init armv7_reset_read_pmnc(void) -{ - u32 nb_cnt; - - /* Initialize & Reset PMNC: C and P bits */ - armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); - - /* Read the nb of CNTx counters supported from PMNC */ - nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; - - /* Add the CPU cycles counter and return */ - return nb_cnt + 1; -} - -const struct arm_pmu *__init armv7_a8_pmu_init(void) -{ - armv7pmu.id = ARM_PERF_PMU_ID_CA8; - armv7pmu.name = "ARMv7 Cortex-A8"; - armv7pmu.cache_map = &armv7_a8_perf_cache_map; - armv7pmu.event_map = &armv7_a8_perf_map; - armv7pmu.num_events = armv7_reset_read_pmnc(); - return &armv7pmu; -} - -const struct arm_pmu *__init armv7_a9_pmu_init(void) -{ - armv7pmu.id = ARM_PERF_PMU_ID_CA9; - armv7pmu.name = "ARMv7 Cortex-A9"; - armv7pmu.cache_map = &armv7_a9_perf_cache_map; - armv7pmu.event_map = &armv7_a9_perf_map; - armv7pmu.num_events = armv7_reset_read_pmnc(); - return &armv7pmu; -} - - -/* - * ARMv5 [xscale] Performance counter handling code. - * - * Based on xscale OProfile code. - * - * There are two variants of the xscale PMU that we support: - * - xscale1pmu: 2 event counters and a cycle counter - * - xscale2pmu: 4 event counters and a cycle counter - * The two variants share event definitions, but have different - * PMU structures. - */ - -enum xscale_perf_types { - XSCALE_PERFCTR_ICACHE_MISS = 0x00, - XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, - XSCALE_PERFCTR_DATA_STALL = 0x02, - XSCALE_PERFCTR_ITLB_MISS = 0x03, - XSCALE_PERFCTR_DTLB_MISS = 0x04, - XSCALE_PERFCTR_BRANCH = 0x05, - XSCALE_PERFCTR_BRANCH_MISS = 0x06, - XSCALE_PERFCTR_INSTRUCTION = 0x07, - XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, - XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, - XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, - XSCALE_PERFCTR_DCACHE_MISS = 0x0B, - XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, - XSCALE_PERFCTR_PC_CHANGED = 0x0D, - XSCALE_PERFCTR_BCU_REQUEST = 0x10, - XSCALE_PERFCTR_BCU_FULL = 0x11, - XSCALE_PERFCTR_BCU_DRAIN = 0x12, - XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, - XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, - XSCALE_PERFCTR_RMW = 0x16, - /* XSCALE_PERFCTR_CCNT is not hardware defined */ - XSCALE_PERFCTR_CCNT = 0xFE, - XSCALE_PERFCTR_UNUSED = 0xFF, -}; - -enum xscale_counters { - XSCALE_CYCLE_COUNTER = 1, - XSCALE_COUNTER0, - XSCALE_COUNTER1, - XSCALE_COUNTER2, - XSCALE_COUNTER3, -}; - -static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, - [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, - [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -#define XSCALE_PMU_ENABLE 0x001 -#define XSCALE_PMN_RESET 0x002 -#define XSCALE_CCNT_RESET 0x004 -#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) -#define XSCALE_PMU_CNT64 0x008 - -#define XSCALE1_OVERFLOWED_MASK 0x700 -#define XSCALE1_CCOUNT_OVERFLOW 0x400 -#define XSCALE1_COUNT0_OVERFLOW 0x100 -#define XSCALE1_COUNT1_OVERFLOW 0x200 -#define XSCALE1_CCOUNT_INT_EN 0x040 -#define XSCALE1_COUNT0_INT_EN 0x010 -#define XSCALE1_COUNT1_INT_EN 0x020 -#define XSCALE1_COUNT0_EVT_SHFT 12 -#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) -#define XSCALE1_COUNT1_EVT_SHFT 20 -#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) - -static inline u32 -xscale1pmu_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); - return val; -} - -static inline void -xscale1pmu_write_pmnc(u32 val) -{ - /* upper 4bits and 7, 11 are write-as-0 */ - val &= 0xffff77f; - asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); -} - -static inline int -xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, - enum xscale_counters counter) -{ - int ret = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ret = pmnc & XSCALE1_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ret = pmnc & XSCALE1_COUNT1_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - } - - return ret; -} - -static irqreturn_t -xscale1pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* - * NOTE: there's an A stepping erratum that states if an overflow - * bit already exists and another occurs, the previous - * Overflow bit gets cleared. There's no workaround. - * Fixed in B stepping or later. - */ - pmnc = xscale1pmu_read_pmnc(); - - /* - * Write the value back to clear the overflow flags. Overflow - * flags remain in pmnc for use below. We also disable the PMU - * while we process the interrupt. - */ - xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); - - if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) - return IRQ_NONE; - - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - irq_work_run(); - - /* - * Re-enable the PMU. - */ - pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static void -xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long val, mask, evt, flags; - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - mask = 0; - evt = XSCALE1_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - mask = XSCALE1_COUNT0_EVT_MASK; - evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | - XSCALE1_COUNT0_INT_EN; - break; - case XSCALE_COUNTER1: - mask = XSCALE1_COUNT1_EVT_MASK; - evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | - XSCALE1_COUNT1_INT_EN; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~mask; - val |= evt; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long val, mask, evt, flags; - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - mask = XSCALE1_CCOUNT_INT_EN; - evt = 0; - break; - case XSCALE_COUNTER0: - mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; - evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; - evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~mask; - val |= evt; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static int -xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - if (XSCALE_PERFCTR_CCNT == event->config_base) { - if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return XSCALE_CYCLE_COUNTER; - } else { - if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) { - return XSCALE_COUNTER1; - } - - if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) { - return XSCALE_COUNTER0; - } - - return -EAGAIN; - } -} - -static void -xscale1pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val |= XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale1pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline u32 -xscale1pmu_read_counter(int counter) -{ - u32 val = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); - break; - } - - return val; -} - -static inline void -xscale1pmu_write_counter(int counter, u32 val) -{ - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); - break; - } -} - -static const struct arm_pmu xscale1pmu = { - .id = ARM_PERF_PMU_ID_XSCALE1, - .name = "xscale1", - .handle_irq = xscale1pmu_handle_irq, - .enable = xscale1pmu_enable_event, - .disable = xscale1pmu_disable_event, - .read_counter = xscale1pmu_read_counter, - .write_counter = xscale1pmu_write_counter, - .get_event_idx = xscale1pmu_get_event_idx, - .start = xscale1pmu_start, - .stop = xscale1pmu_stop, - .cache_map = &xscale_perf_cache_map, - .event_map = &xscale_perf_map, - .raw_event_mask = 0xFF, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -const struct arm_pmu *__init xscale1pmu_init(void) -{ - return &xscale1pmu; -} - -#define XSCALE2_OVERFLOWED_MASK 0x01f -#define XSCALE2_CCOUNT_OVERFLOW 0x001 -#define XSCALE2_COUNT0_OVERFLOW 0x002 -#define XSCALE2_COUNT1_OVERFLOW 0x004 -#define XSCALE2_COUNT2_OVERFLOW 0x008 -#define XSCALE2_COUNT3_OVERFLOW 0x010 -#define XSCALE2_CCOUNT_INT_EN 0x001 -#define XSCALE2_COUNT0_INT_EN 0x002 -#define XSCALE2_COUNT1_INT_EN 0x004 -#define XSCALE2_COUNT2_INT_EN 0x008 -#define XSCALE2_COUNT3_INT_EN 0x010 -#define XSCALE2_COUNT0_EVT_SHFT 0 -#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) -#define XSCALE2_COUNT1_EVT_SHFT 8 -#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) -#define XSCALE2_COUNT2_EVT_SHFT 16 -#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) -#define XSCALE2_COUNT3_EVT_SHFT 24 -#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) - -static inline u32 -xscale2pmu_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); - /* bits 1-2 and 4-23 are read-unpredictable */ - return val & 0xff000009; -} - -static inline void -xscale2pmu_write_pmnc(u32 val) -{ - /* bits 4-23 are write-as-0, 24-31 are write ignored */ - val &= 0xf; - asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); -} - -static inline u32 -xscale2pmu_read_overflow_flags(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); - return val; -} - -static inline void -xscale2pmu_write_overflow_flags(u32 val) -{ - asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); -} - -static inline u32 -xscale2pmu_read_event_select(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); - return val; -} - -static inline void -xscale2pmu_write_event_select(u32 val) -{ - asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); -} - -static inline u32 -xscale2pmu_read_int_enable(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); - return val; -} - -static void -xscale2pmu_write_int_enable(u32 val) -{ - asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); -} - -static inline int -xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, - enum xscale_counters counter) -{ - int ret = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ret = of_flags & XSCALE2_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ret = of_flags & XSCALE2_COUNT1_OVERFLOW; - break; - case XSCALE_COUNTER2: - ret = of_flags & XSCALE2_COUNT2_OVERFLOW; - break; - case XSCALE_COUNTER3: - ret = of_flags & XSCALE2_COUNT3_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - } - - return ret; -} - -static irqreturn_t -xscale2pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc, of_flags; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* Disable the PMU. */ - pmnc = xscale2pmu_read_pmnc(); - xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); - - /* Check the overflow flag register. */ - of_flags = xscale2pmu_read_overflow_flags(); - if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) - return IRQ_NONE; - - /* Clear the overflow bits. */ - xscale2pmu_write_overflow_flags(of_flags); - - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - irq_work_run(); - - /* - * Re-enable the PMU. - */ - pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static void -xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags, ien, evtsel; - - ien = xscale2pmu_read_int_enable(); - evtsel = xscale2pmu_read_event_select(); - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - ien |= XSCALE2_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - ien |= XSCALE2_COUNT0_INT_EN; - evtsel &= ~XSCALE2_COUNT0_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - ien |= XSCALE2_COUNT1_INT_EN; - evtsel &= ~XSCALE2_COUNT1_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; - break; - case XSCALE_COUNTER2: - ien |= XSCALE2_COUNT2_INT_EN; - evtsel &= ~XSCALE2_COUNT2_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; - break; - case XSCALE_COUNTER3: - ien |= XSCALE2_COUNT3_INT_EN; - evtsel &= ~XSCALE2_COUNT3_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - xscale2pmu_write_event_select(evtsel); - xscale2pmu_write_int_enable(ien); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags, ien, evtsel; - - ien = xscale2pmu_read_int_enable(); - evtsel = xscale2pmu_read_event_select(); - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - ien &= ~XSCALE2_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - ien &= ~XSCALE2_COUNT0_INT_EN; - evtsel &= ~XSCALE2_COUNT0_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - ien &= ~XSCALE2_COUNT1_INT_EN; - evtsel &= ~XSCALE2_COUNT1_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; - break; - case XSCALE_COUNTER2: - ien &= ~XSCALE2_COUNT2_INT_EN; - evtsel &= ~XSCALE2_COUNT2_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; - break; - case XSCALE_COUNTER3: - ien &= ~XSCALE2_COUNT3_INT_EN; - evtsel &= ~XSCALE2_COUNT3_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - xscale2pmu_write_event_select(evtsel); - xscale2pmu_write_int_enable(ien); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static int -xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - int idx = xscale1pmu_get_event_idx(cpuc, event); - if (idx >= 0) - goto out; - - if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) - idx = XSCALE_COUNTER3; - else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) - idx = XSCALE_COUNTER2; -out: - return idx; -} - -static void -xscale2pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; - val |= XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale2pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale2pmu_read_pmnc(); - val &= ~XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline u32 -xscale2pmu_read_counter(int counter) -{ - u32 val = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER2: - asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER3: - asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); - break; - } - - return val; -} - -static inline void -xscale2pmu_write_counter(int counter, u32 val) -{ - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER2: - asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER3: - asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); - break; - } -} - -static const struct arm_pmu xscale2pmu = { - .id = ARM_PERF_PMU_ID_XSCALE2, - .name = "xscale2", - .handle_irq = xscale2pmu_handle_irq, - .enable = xscale2pmu_enable_event, - .disable = xscale2pmu_disable_event, - .read_counter = xscale2pmu_read_counter, - .write_counter = xscale2pmu_write_counter, - .get_event_idx = xscale2pmu_get_event_idx, - .start = xscale2pmu_start, - .stop = xscale2pmu_stop, - .cache_map = &xscale_perf_cache_map, - .event_map = &xscale_perf_map, - .raw_event_mask = 0xFF, - .num_events = 5, - .max_period = (1LLU << 32) - 1, -}; - -const struct arm_pmu *__init xscale2pmu_init(void) -{ - return &xscale2pmu; -} - -static int __init -init_hw_perf_events(void) -{ - unsigned long cpuid = read_cpuid_id(); - unsigned long implementor = (cpuid & 0xFF000000) >> 24; - unsigned long part_number = (cpuid & 0xFFF0); - - /* ARM Ltd CPUs. */ - if (0x41 == implementor) { - switch (part_number) { - case 0xB360: /* ARM1136 */ - case 0xB560: /* ARM1156 */ - case 0xB760: /* ARM1176 */ - armpmu = armv6pmu_init(); - break; - case 0xB020: /* ARM11mpcore */ - armpmu = armv6mpcore_pmu_init(); - break; - case 0xC080: /* Cortex-A8 */ - armpmu = armv7_a8_pmu_init(); - break; - case 0xC090: /* Cortex-A9 */ - armpmu = armv7_a9_pmu_init(); - break; - } - /* Intel CPUs [xscale]. */ - } else if (0x69 == implementor) { - part_number = (cpuid >> 13) & 0x7; - switch (part_number) { - case 1: - armpmu = xscale1pmu_init(); - break; - case 2: - armpmu = xscale2pmu_init(); - break; - } - } - - if (armpmu) { - pr_info("enabled with %s PMU driver, %d counters available\n", - armpmu->name, armpmu->num_events); - } else { - pr_info("no hardware support available\n"); - } - - perf_pmu_register(&pmu); - - return 0; -} -arch_initcall(init_hw_perf_events); - -/* - * Callchain handling code. - */ - -/* - * The registers we're interested in are at the end of the variable - * length saved register structure. The fp points at the end of this - * structure so the address of this struct is: - * (struct frame_tail *)(xxx->fp)-1 - * - * This code has been adapted from the ARM OProfile support. - */ -struct frame_tail { - struct frame_tail *fp; - unsigned long sp; - unsigned long lr; -} __attribute__((packed)); - -/* - * Get the return address for a single stackframe and return a pointer to the - * next frame tail. - */ -static struct frame_tail * -user_backtrace(struct frame_tail *tail, - struct perf_callchain_entry *entry) -{ - struct frame_tail buftail; - - /* Also check accessibility of one struct frame_tail beyond */ - if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) - return NULL; - if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail))) - return NULL; - - perf_callchain_store(entry, buftail.lr); - - /* - * Frame pointers should strictly progress back up the stack - * (towards higher addresses). - */ - if (tail >= buftail.fp) - return NULL; - - return buftail.fp - 1; -} - -void -perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) -{ - struct frame_tail *tail; - - - tail = (struct frame_tail *)regs->ARM_fp - 1; - - while (tail && !((unsigned long)tail & 0x3)) - tail = user_backtrace(tail, entry); -} - -/* - * Gets called by walk_stackframe() for every stackframe. This will be called - * whist unwinding the stackframe and is like a subroutine return so we use - * the PC. - */ -static int -callchain_trace(struct stackframe *fr, - void *data) -{ - struct perf_callchain_entry *entry = data; - perf_callchain_store(entry, fr->pc); - return 0; -} - -void -perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) -{ - struct stackframe fr; - - fr.fp = regs->ARM_fp; - fr.sp = regs->ARM_sp; - fr.lr = regs->ARM_lr; - fr.pc = regs->ARM_pc; - walk_stackframe(&fr, callchain_trace, entry); -} +#undef DEBUG + +/* + * ARM performance counter support. + * + * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles + * Copyright (C) 2010 ARM Ltd., Will Deacon + * + * This code is based on the sparc64 perf event code, which is in turn based + * on the x86 code. Callchain code is based on the ARM OProfile backtrace + * code. + */ +#define pr_fmt(fmt) "hw perfevents: " fmt + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static struct platform_device *pmu_device; + +/* + * Hardware lock to serialize accesses to PMU registers. Needed for the + * read/modify/write sequences. + */ +DEFINE_SPINLOCK(pmu_lock); + +/* + * ARMv6 supports a maximum of 3 events, starting from index 1. If we add + * another platform that supports more, we need to increase this to be the + * largest of all platforms. + * + * ARMv7 supports up to 32 events: + * cycle counter CCNT + 31 events counters CNT0..30. + * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters. + */ +#define ARMPMU_MAX_HWEVENTS 33 + +/* The events for a given CPU. */ +struct cpu_hw_events { + /* + * The events that are active on the CPU for the given index. Index 0 + * is reserved. + */ + struct perf_event *events[ARMPMU_MAX_HWEVENTS]; + + /* + * A 1 bit for an index indicates that the counter is being used for + * an event. A 0 means that the counter can be used. + */ + unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; + + /* + * A 1 bit for an index indicates that the counter is actively being + * used. + */ + unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; +}; +DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); + +struct arm_pmu { + enum arm_perf_pmu_ids id; + const char *name; + irqreturn_t (*handle_irq)(int irq_num, void *dev); + void (*enable)(struct hw_perf_event *evt, int idx); + void (*disable)(struct hw_perf_event *evt, int idx); + int (*get_event_idx)(struct cpu_hw_events *cpuc, + struct hw_perf_event *hwc); + u32 (*read_counter)(int idx); + void (*write_counter)(int idx, u32 val); + void (*start)(void); + void (*stop)(void); + const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; + const unsigned (*event_map)[PERF_COUNT_HW_MAX]; + u32 raw_event_mask; + int num_events; + u64 max_period; +}; + +/* Set at runtime when we know what CPU type we are. */ +static const struct arm_pmu *armpmu; + +enum arm_perf_pmu_ids +armpmu_get_pmu_id(void) +{ + int id = -ENODEV; + + if (armpmu != NULL) + id = armpmu->id; + + return id; +} +EXPORT_SYMBOL_GPL(armpmu_get_pmu_id); + +int +armpmu_get_max_events(void) +{ + int max_events = 0; + + if (armpmu != NULL) + max_events = armpmu->num_events; + + return max_events; +} +EXPORT_SYMBOL_GPL(armpmu_get_max_events); + +int perf_num_counters(void) +{ + return armpmu_get_max_events(); +} +EXPORT_SYMBOL_GPL(perf_num_counters); + +#define HW_OP_UNSUPPORTED 0xFFFF + +#define C(_x) \ + PERF_COUNT_HW_CACHE_##_x + +#define CACHE_OP_UNSUPPORTED 0xFFFF + +static int +armpmu_map_cache_event(u64 config) +{ + unsigned int cache_type, cache_op, cache_result, ret; + + cache_type = (config >> 0) & 0xff; + if (cache_type >= PERF_COUNT_HW_CACHE_MAX) + return -EINVAL; + + cache_op = (config >> 8) & 0xff; + if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) + return -EINVAL; + + cache_result = (config >> 16) & 0xff; + if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result]; + + if (ret == CACHE_OP_UNSUPPORTED) + return -ENOENT; + + return ret; +} + +static int +armpmu_map_event(u64 config) +{ + int mapping = (*armpmu->event_map)[config]; + return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping; +} + +static int +armpmu_map_raw_event(u64 config) +{ + return (int)(config & armpmu->raw_event_mask); +} + +static int +armpmu_event_set_period(struct perf_event *event, + struct hw_perf_event *hwc, + int idx) +{ + s64 left = local64_read(&hwc->period_left); + s64 period = hwc->sample_period; + int ret = 0; + + if (unlikely(left <= -period)) { + left = period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + ret = 1; + } + + if (unlikely(left <= 0)) { + left += period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + ret = 1; + } + + if (left > (s64)armpmu->max_period) + left = armpmu->max_period; + + local64_set(&hwc->prev_count, (u64)-left); + + armpmu->write_counter(idx, (u64)(-left) & 0xffffffff); + + perf_event_update_userpage(event); + + return ret; +} + +static u64 +armpmu_event_update(struct perf_event *event, + struct hw_perf_event *hwc, + int idx) +{ + int shift = 64 - 32; + s64 prev_raw_count, new_raw_count; + u64 delta; + +again: + prev_raw_count = local64_read(&hwc->prev_count); + new_raw_count = armpmu->read_counter(idx); + + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count) + goto again; + + delta = (new_raw_count << shift) - (prev_raw_count << shift); + delta >>= shift; + + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); + + return new_raw_count; +} + +static void +armpmu_read(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + + /* Don't read disabled counters! */ + if (hwc->idx < 0) + return; + + armpmu_event_update(event, hwc, hwc->idx); +} + +static void +armpmu_stop(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + + if (!armpmu) + return; + + /* + * ARM pmu always has to update the counter, so ignore + * PERF_EF_UPDATE, see comments in armpmu_start(). + */ + if (!(hwc->state & PERF_HES_STOPPED)) { + armpmu->disable(hwc, hwc->idx); + barrier(); /* why? */ + armpmu_event_update(event, hwc, hwc->idx); + hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; + } +} + +static void +armpmu_start(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + + if (!armpmu) + return; + + /* + * ARM pmu always has to reprogram the period, so ignore + * PERF_EF_RELOAD, see the comment below. + */ + if (flags & PERF_EF_RELOAD) + WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); + + hwc->state = 0; + /* + * Set the period again. Some counters can't be stopped, so when we + * were stopped we simply disabled the IRQ source and the counter + * may have been left counting. If we don't do this step then we may + * get an interrupt too soon or *way* too late if the overflow has + * happened since disabling. + */ + armpmu_event_set_period(event, hwc, hwc->idx); + armpmu->enable(hwc, hwc->idx); +} + +static void +armpmu_del(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + WARN_ON(idx < 0); + + clear_bit(idx, cpuc->active_mask); + armpmu_stop(event, PERF_EF_UPDATE); + cpuc->events[idx] = NULL; + clear_bit(idx, cpuc->used_mask); + + perf_event_update_userpage(event); +} + +static int +armpmu_add(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx; + int err = 0; + + perf_pmu_disable(event->pmu); + + /* If we don't have a space for the counter then finish early. */ + idx = armpmu->get_event_idx(cpuc, hwc); + if (idx < 0) { + err = idx; + goto out; + } + + /* + * If there is an event in the counter we are going to use then make + * sure it is disabled. + */ + event->hw.idx = idx; + armpmu->disable(hwc, idx); + cpuc->events[idx] = event; + set_bit(idx, cpuc->active_mask); + + hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; + if (flags & PERF_EF_START) + armpmu_start(event, PERF_EF_RELOAD); + + /* Propagate our changes to the userspace mapping. */ + perf_event_update_userpage(event); + +out: + perf_pmu_enable(event->pmu); + return err; +} + +static struct pmu pmu; + +static int +validate_event(struct cpu_hw_events *cpuc, + struct perf_event *event) +{ + struct hw_perf_event fake_event = event->hw; + + if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) + return 1; + + return armpmu->get_event_idx(cpuc, &fake_event) >= 0; +} + +static int +validate_group(struct perf_event *event) +{ + struct perf_event *sibling, *leader = event->group_leader; + struct cpu_hw_events fake_pmu; + + memset(&fake_pmu, 0, sizeof(fake_pmu)); + + if (!validate_event(&fake_pmu, leader)) + return -ENOSPC; + + list_for_each_entry(sibling, &leader->sibling_list, group_entry) { + if (!validate_event(&fake_pmu, sibling)) + return -ENOSPC; + } + + if (!validate_event(&fake_pmu, event)) + return -ENOSPC; + + return 0; +} + +static int +armpmu_reserve_hardware(void) +{ + int i, err = -ENODEV, irq; + + pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); + if (IS_ERR(pmu_device)) { + pr_warning("unable to reserve pmu\n"); + return PTR_ERR(pmu_device); + } + + init_pmu(ARM_PMU_DEVICE_CPU); + + if (pmu_device->num_resources < 1) { + pr_err("no irqs for PMUs defined\n"); + return -ENODEV; + } + + for (i = 0; i < pmu_device->num_resources; ++i) { + irq = platform_get_irq(pmu_device, i); + if (irq < 0) + continue; + + err = request_irq(irq, armpmu->handle_irq, + IRQF_DISABLED | IRQF_NOBALANCING, + "armpmu", NULL); + if (err) { + pr_warning("unable to request IRQ%d for ARM perf " + "counters\n", irq); + break; + } + } + + if (err) { + for (i = i - 1; i >= 0; --i) { + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, NULL); + } + release_pmu(pmu_device); + pmu_device = NULL; + } + + return err; +} + +static void +armpmu_release_hardware(void) +{ + int i, irq; + + for (i = pmu_device->num_resources - 1; i >= 0; --i) { + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, NULL); + } + armpmu->stop(); + + release_pmu(pmu_device); + pmu_device = NULL; +} + +static atomic_t active_events = ATOMIC_INIT(0); +static DEFINE_MUTEX(pmu_reserve_mutex); + +static void +hw_perf_event_destroy(struct perf_event *event) +{ + if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) { + armpmu_release_hardware(); + mutex_unlock(&pmu_reserve_mutex); + } +} + +static int +__hw_perf_event_init(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + int mapping, err; + + /* Decode the generic type into an ARM event identifier. */ + if (PERF_TYPE_HARDWARE == event->attr.type) { + mapping = armpmu_map_event(event->attr.config); + } else if (PERF_TYPE_HW_CACHE == event->attr.type) { + mapping = armpmu_map_cache_event(event->attr.config); + } else if (PERF_TYPE_RAW == event->attr.type) { + mapping = armpmu_map_raw_event(event->attr.config); + } else { + pr_debug("event type %x not supported\n", event->attr.type); + return -EOPNOTSUPP; + } + + if (mapping < 0) { + pr_debug("event %x:%llx not supported\n", event->attr.type, + event->attr.config); + return mapping; + } + + /* + * Check whether we need to exclude the counter from certain modes. + * The ARM performance counters are on all of the time so if someone + * has asked us for some excludes then we have to fail. + */ + if (event->attr.exclude_kernel || event->attr.exclude_user || + event->attr.exclude_hv || event->attr.exclude_idle) { + pr_debug("ARM performance counters do not support " + "mode exclusion\n"); + return -EPERM; + } + + /* + * We don't assign an index until we actually place the event onto + * hardware. Use -1 to signify that we haven't decided where to put it + * yet. For SMP systems, each core has it's own PMU so we can't do any + * clever allocation or constraints checking at this point. + */ + hwc->idx = -1; + + /* + * Store the event encoding into the config_base field. config and + * event_base are unused as the only 2 things we need to know are + * the event mapping and the counter to use. The counter to use is + * also the indx and the config_base is the event type. + */ + hwc->config_base = (unsigned long)mapping; + hwc->config = 0; + hwc->event_base = 0; + + if (!hwc->sample_period) { + hwc->sample_period = armpmu->max_period; + hwc->last_period = hwc->sample_period; + local64_set(&hwc->period_left, hwc->sample_period); + } + + err = 0; + if (event->group_leader != event) { + err = validate_group(event); + if (err) + return -EINVAL; + } + + return err; +} + +static int armpmu_event_init(struct perf_event *event) +{ + int err = 0; + + switch (event->attr.type) { + case PERF_TYPE_RAW: + case PERF_TYPE_HARDWARE: + case PERF_TYPE_HW_CACHE: + break; + + default: + return -ENOENT; + } + + if (!armpmu) + return -ENODEV; + + event->destroy = hw_perf_event_destroy; + + if (!atomic_inc_not_zero(&active_events)) { + if (atomic_read(&active_events) > armpmu->num_events) { + atomic_dec(&active_events); + return -ENOSPC; + } + + mutex_lock(&pmu_reserve_mutex); + if (atomic_read(&active_events) == 0) { + err = armpmu_reserve_hardware(); + } + + if (!err) + atomic_inc(&active_events); + mutex_unlock(&pmu_reserve_mutex); + } + + if (err) + return err; + + err = __hw_perf_event_init(event); + if (err) + hw_perf_event_destroy(event); + + return err; +} + +static void armpmu_enable(struct pmu *pmu) +{ + /* Enable all of the perf events on hardware. */ + int idx; + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + + if (!armpmu) + return; + + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + + if (!event) + continue; + + armpmu->enable(&event->hw, idx); + } + + armpmu->start(); +} + +static void armpmu_disable(struct pmu *pmu) +{ + if (armpmu) + armpmu->stop(); +} + +static struct pmu pmu = { + .pmu_enable = armpmu_enable, + .pmu_disable = armpmu_disable, + .event_init = armpmu_event_init, + .add = armpmu_add, + .del = armpmu_del, + .start = armpmu_start, + .stop = armpmu_stop, + .read = armpmu_read, +}; + +/* Include the PMU-specific implementations. */ +#include "perf_event_xscale.c" +#include "perf_event_v6.c" +#include "perf_event_v7.c" + +static int __init +init_hw_perf_events(void) +{ + unsigned long cpuid = read_cpuid_id(); + unsigned long implementor = (cpuid & 0xFF000000) >> 24; + unsigned long part_number = (cpuid & 0xFFF0); + + /* ARM Ltd CPUs. */ + if (0x41 == implementor) { + switch (part_number) { + case 0xB360: /* ARM1136 */ + case 0xB560: /* ARM1156 */ + case 0xB760: /* ARM1176 */ + armpmu = armv6pmu_init(); + break; + case 0xB020: /* ARM11mpcore */ + armpmu = armv6mpcore_pmu_init(); + break; + case 0xC080: /* Cortex-A8 */ + armpmu = armv7_a8_pmu_init(); + break; + case 0xC090: /* Cortex-A9 */ + armpmu = armv7_a9_pmu_init(); + break; + } + /* Intel CPUs [xscale]. */ + } else if (0x69 == implementor) { + part_number = (cpuid >> 13) & 0x7; + switch (part_number) { + case 1: + armpmu = xscale1pmu_init(); + break; + case 2: + armpmu = xscale2pmu_init(); + break; + } + } + + if (armpmu) { + pr_info("enabled with %s PMU driver, %d counters available\n", + armpmu->name, armpmu->num_events); + } else { + pr_info("no hardware support available\n"); + } + + perf_pmu_register(&pmu); + + return 0; +} +arch_initcall(init_hw_perf_events); + +/* + * Callchain handling code. + */ + +/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct frame_tail *)(xxx->fp)-1 + * + * This code has been adapted from the ARM OProfile support. + */ +struct frame_tail { + struct frame_tail *fp; + unsigned long sp; + unsigned long lr; +} __attribute__((packed)); + +/* + * Get the return address for a single stackframe and return a pointer to the + * next frame tail. + */ +static struct frame_tail * +user_backtrace(struct frame_tail *tail, + struct perf_callchain_entry *entry) +{ + struct frame_tail buftail; + + /* Also check accessibility of one struct frame_tail beyond */ + if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) + return NULL; + if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail))) + return NULL; + + perf_callchain_store(entry, buftail.lr); + + /* + * Frame pointers should strictly progress back up the stack + * (towards higher addresses). + */ + if (tail >= buftail.fp) + return NULL; + + return buftail.fp - 1; +} + +void +perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) +{ + struct frame_tail *tail; + + + tail = (struct frame_tail *)regs->ARM_fp - 1; + + while (tail && !((unsigned long)tail & 0x3)) + tail = user_backtrace(tail, entry); +} + +/* + * Gets called by walk_stackframe() for every stackframe. This will be called + * whist unwinding the stackframe and is like a subroutine return so we use + * the PC. + */ +static int +callchain_trace(struct stackframe *fr, + void *data) +{ + struct perf_callchain_entry *entry = data; + perf_callchain_store(entry, fr->pc); + return 0; +} + +void +perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) +{ + struct stackframe fr; + + fr.fp = regs->ARM_fp; + fr.sp = regs->ARM_sp; + fr.lr = regs->ARM_lr; + fr.pc = regs->ARM_pc; + walk_stackframe(&fr, callchain_trace, entry); +} diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c new file mode 100644 index 00000000000..7aeb07da907 --- /dev/null +++ b/arch/arm/kernel/perf_event_v6.c @@ -0,0 +1,672 @@ +/* + * ARMv6 Performance counter handling code. + * + * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles + * + * ARMv6 has 2 configurable performance counters and a single cycle counter. + * They all share a single reset bit but can be written to zero so we can use + * that for a reset. + * + * The counters can't be individually enabled or disabled so when we remove + * one event and replace it with another we could get spurious counts from the + * wrong event. However, we can take advantage of the fact that the + * performance counters can export events to the event bus, and the event bus + * itself can be monitored. This requires that we *don't* export the events to + * the event bus. The procedure for disabling a configurable counter is: + * - change the counter to count the ETMEXTOUT[0] signal (0x20). This + * effectively stops the counter from counting. + * - disable the counter's interrupt generation (each counter has it's + * own interrupt enable bit). + * Once stopped, the counter value can be written as 0 to reset. + * + * To enable a counter: + * - enable the counter's interrupt generation. + * - set the new event type. + * + * Note: the dedicated cycle counter only counts cycles and can't be + * enabled/disabled independently of the others. When we want to disable the + * cycle counter, we have to just disable the interrupt reporting and start + * ignoring that counter. When re-enabling, we have to reset the value and + * enable the interrupt. + */ + +#ifdef CONFIG_CPU_V6 +enum armv6_perf_types { + ARMV6_PERFCTR_ICACHE_MISS = 0x0, + ARMV6_PERFCTR_IBUF_STALL = 0x1, + ARMV6_PERFCTR_DDEP_STALL = 0x2, + ARMV6_PERFCTR_ITLB_MISS = 0x3, + ARMV6_PERFCTR_DTLB_MISS = 0x4, + ARMV6_PERFCTR_BR_EXEC = 0x5, + ARMV6_PERFCTR_BR_MISPREDICT = 0x6, + ARMV6_PERFCTR_INSTR_EXEC = 0x7, + ARMV6_PERFCTR_DCACHE_HIT = 0x9, + ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, + ARMV6_PERFCTR_DCACHE_MISS = 0xB, + ARMV6_PERFCTR_DCACHE_WBACK = 0xC, + ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, + ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, + ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, + ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, + ARMV6_PERFCTR_WBUF_DRAINED = 0x12, + ARMV6_PERFCTR_CPU_CYCLES = 0xFF, + ARMV6_PERFCTR_NOP = 0x20, +}; + +enum armv6_counters { + ARMV6_CYCLE_COUNTER = 1, + ARMV6_COUNTER0, + ARMV6_COUNTER1, +}; + +/* + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * The ARM performance counters can count micro DTLB misses, + * micro ITLB misses and main TLB misses. There isn't an event + * for TLB misses, so use the micro misses here and if users + * want the main TLB misses they can use a raw counter. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +enum armv6mpcore_perf_types { + ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0, + ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1, + ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2, + ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3, + ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4, + ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5, + ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6, + ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7, + ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8, + ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA, + ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB, + ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC, + ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD, + ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE, + ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF, + ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10, + ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11, + ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12, + ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13, + ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF, +}; + +/* + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = + ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, + [C(RESULT_MISS)] = + ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = + ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, + [C(RESULT_MISS)] = + ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * The ARM performance counters can count micro DTLB misses, + * micro ITLB misses and main TLB misses. There isn't an event + * for TLB misses, so use the micro misses here and if users + * want the main TLB misses they can use a raw counter. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +static inline unsigned long +armv6_pmcr_read(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); + return val; +} + +static inline void +armv6_pmcr_write(unsigned long val) +{ + asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); +} + +#define ARMV6_PMCR_ENABLE (1 << 0) +#define ARMV6_PMCR_CTR01_RESET (1 << 1) +#define ARMV6_PMCR_CCOUNT_RESET (1 << 2) +#define ARMV6_PMCR_CCOUNT_DIV (1 << 3) +#define ARMV6_PMCR_COUNT0_IEN (1 << 4) +#define ARMV6_PMCR_COUNT1_IEN (1 << 5) +#define ARMV6_PMCR_CCOUNT_IEN (1 << 6) +#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) +#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) +#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) +#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 +#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) +#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 +#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) + +#define ARMV6_PMCR_OVERFLOWED_MASK \ + (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ + ARMV6_PMCR_CCOUNT_OVERFLOW) + +static inline int +armv6_pmcr_has_overflowed(unsigned long pmcr) +{ + return pmcr & ARMV6_PMCR_OVERFLOWED_MASK; +} + +static inline int +armv6_pmcr_counter_has_overflowed(unsigned long pmcr, + enum armv6_counters counter) +{ + int ret = 0; + + if (ARMV6_CYCLE_COUNTER == counter) + ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; + else if (ARMV6_COUNTER0 == counter) + ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; + else if (ARMV6_COUNTER1 == counter) + ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + + return ret; +} + +static inline u32 +armv6pmu_read_counter(int counter) +{ + unsigned long value = 0; + + if (ARMV6_CYCLE_COUNTER == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); + else if (ARMV6_COUNTER0 == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); + else if (ARMV6_COUNTER1 == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + + return value; +} + +static inline void +armv6pmu_write_counter(int counter, + u32 value) +{ + if (ARMV6_CYCLE_COUNTER == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); + else if (ARMV6_COUNTER0 == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); + else if (ARMV6_COUNTER1 == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); +} + +void +armv6pmu_enable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, evt, flags; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = 0; + evt = ARMV6_PMCR_CCOUNT_IEN; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_EVT_COUNT0_MASK; + evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | + ARMV6_PMCR_COUNT0_IEN; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_EVT_COUNT1_MASK; + evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | + ARMV6_PMCR_COUNT1_IEN; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Mask out the current event and set the counter to count the event + * that we're interested in. + */ + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static irqreturn_t +armv6pmu_handle_irq(int irq_num, + void *dev) +{ + unsigned long pmcr = armv6_pmcr_read(); + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + if (!armv6_pmcr_has_overflowed(pmcr)) + return IRQ_NONE; + + regs = get_irq_regs(); + + /* + * The interrupts are cleared by writing the overflow flags back to + * the control register. All of the other bits don't have any effect + * if they are rewritten, so write the whole value back. + */ + armv6_pmcr_write(pmcr); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + /* + * We have a single interrupt for all counters. Check that + * each counter has overflowed before we process it. + */ + if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + /* + * Handle the pending perf events. + * + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this + * will not work. + */ + irq_work_run(); + + return IRQ_HANDLED; +} + +static void +armv6pmu_start(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val |= ARMV6_PMCR_ENABLE; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +armv6pmu_stop(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~ARMV6_PMCR_ENABLE; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + /* Always place a cycle counter into the cycle counter. */ + if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { + if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return ARMV6_CYCLE_COUNTER; + } else { + /* + * For anything other than a cycle counter, try and use + * counter0 and counter1. + */ + if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) + return ARMV6_COUNTER1; + + if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) + return ARMV6_COUNTER0; + + /* The counters are all in use. */ + return -EAGAIN; + } +} + +static void +armv6pmu_disable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, evt, flags; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = ARMV6_PMCR_CCOUNT_IEN; + evt = 0; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; + evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; + evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Mask out the current event and set the counter to count the number + * of ETM bus signal assertion cycles. The external reporting should + * be disabled and so this should never increment. + */ + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, flags, evt = 0; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = ARMV6_PMCR_CCOUNT_IEN; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_COUNT0_IEN; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_COUNT1_IEN; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Unlike UP ARMv6, we don't have a way of stopping the counters. We + * simply disable the interrupt reporting. + */ + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static const struct arm_pmu armv6pmu = { + .id = ARM_PERF_PMU_ID_V6, + .name = "v6", + .handle_irq = armv6pmu_handle_irq, + .enable = armv6pmu_enable_event, + .disable = armv6pmu_disable_event, + .read_counter = armv6pmu_read_counter, + .write_counter = armv6pmu_write_counter, + .get_event_idx = armv6pmu_get_event_idx, + .start = armv6pmu_start, + .stop = armv6pmu_stop, + .cache_map = &armv6_perf_cache_map, + .event_map = &armv6_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +const struct arm_pmu *__init armv6pmu_init(void) +{ + return &armv6pmu; +} + +/* + * ARMv6mpcore is almost identical to single core ARMv6 with the exception + * that some of the events have different enumerations and that there is no + * *hack* to stop the programmable counters. To stop the counters we simply + * disable the interrupt reporting and update the event. When unthrottling we + * reset the period and enable the interrupt reporting. + */ +static const struct arm_pmu armv6mpcore_pmu = { + .id = ARM_PERF_PMU_ID_V6MP, + .name = "v6mpcore", + .handle_irq = armv6pmu_handle_irq, + .enable = armv6pmu_enable_event, + .disable = armv6mpcore_pmu_disable_event, + .read_counter = armv6pmu_read_counter, + .write_counter = armv6pmu_write_counter, + .get_event_idx = armv6pmu_get_event_idx, + .start = armv6pmu_start, + .stop = armv6pmu_stop, + .cache_map = &armv6mpcore_perf_cache_map, + .event_map = &armv6mpcore_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +const struct arm_pmu *__init armv6mpcore_pmu_init(void) +{ + return &armv6mpcore_pmu; +} +#else +const struct arm_pmu *__init armv6pmu_init(void) +{ + return NULL; +} + +const struct arm_pmu *__init armv6mpcore_pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_V6 */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c new file mode 100644 index 00000000000..4d0423969df --- /dev/null +++ b/arch/arm/kernel/perf_event_v7.c @@ -0,0 +1,906 @@ +/* + * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code. + * + * ARMv7 support: Jean Pihet + * 2010 (c) MontaVista Software, LLC. + * + * Copied from ARMv6 code, with the low level code inspired + * by the ARMv7 Oprofile code. + * + * Cortex-A8 has up to 4 configurable performance counters and + * a single cycle counter. + * Cortex-A9 has up to 31 configurable performance counters and + * a single cycle counter. + * + * All counters can be enabled/disabled and IRQ masked separately. The cycle + * counter and all 4 performance counters together can be reset separately. + */ + +#ifdef CONFIG_CPU_V7 +/* Common ARMv7 event types */ +enum armv7_perf_types { + ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, + ARMV7_PERFCTR_IFETCH_MISS = 0x01, + ARMV7_PERFCTR_ITLB_MISS = 0x02, + ARMV7_PERFCTR_DCACHE_REFILL = 0x03, + ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, + ARMV7_PERFCTR_DTLB_REFILL = 0x05, + ARMV7_PERFCTR_DREAD = 0x06, + ARMV7_PERFCTR_DWRITE = 0x07, + + ARMV7_PERFCTR_EXC_TAKEN = 0x09, + ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, + ARMV7_PERFCTR_CID_WRITE = 0x0B, + /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. + * It counts: + * - all branch instructions, + * - instructions that explicitly write the PC, + * - exception generating instructions. + */ + ARMV7_PERFCTR_PC_WRITE = 0x0C, + ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, + ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, + ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, + ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, + + ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12, + + ARMV7_PERFCTR_CPU_CYCLES = 0xFF +}; + +/* ARMv7 Cortex-A8 specific event types */ +enum armv7_a8_perf_types { + ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, + + ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, + + ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, + ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, + ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, + ARMV7_PERFCTR_L2_ACCESS = 0x43, + ARMV7_PERFCTR_L2_CACH_MISS = 0x44, + ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45, + ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46, + ARMV7_PERFCTR_MEMORY_REPLAY = 0x47, + ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48, + ARMV7_PERFCTR_L1_DATA_MISS = 0x49, + ARMV7_PERFCTR_L1_INST_MISS = 0x4A, + ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B, + ARMV7_PERFCTR_L1_NEON_DATA = 0x4C, + ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D, + ARMV7_PERFCTR_L2_NEON = 0x4E, + ARMV7_PERFCTR_L2_NEON_HIT = 0x4F, + ARMV7_PERFCTR_L1_INST = 0x50, + ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51, + ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52, + ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53, + ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54, + ARMV7_PERFCTR_OP_EXECUTED = 0x55, + ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56, + ARMV7_PERFCTR_CYCLES_INST = 0x57, + ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58, + ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59, + ARMV7_PERFCTR_NEON_CYCLES = 0x5A, + + ARMV7_PERFCTR_PMU0_EVENTS = 0x70, + ARMV7_PERFCTR_PMU1_EVENTS = 0x71, + ARMV7_PERFCTR_PMU_EVENTS = 0x72, +}; + +/* ARMv7 Cortex-A9 specific event types */ +enum armv7_a9_perf_types { + ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40, + ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41, + ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42, + + ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50, + ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51, + + ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60, + ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61, + ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62, + ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63, + ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64, + ARMV7_PERFCTR_DATA_EVICTION = 0x65, + ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66, + ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67, + ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68, + + ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E, + + ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70, + ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71, + ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72, + ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73, + ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74, + + ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80, + ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81, + ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82, + ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83, + ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84, + ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85, + ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86, + + ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A, + ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B, + + ARMV7_PERFCTR_ISB_INST = 0x90, + ARMV7_PERFCTR_DSB_INST = 0x91, + ARMV7_PERFCTR_DMB_INST = 0x92, + ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93, + + ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0, + ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1, + ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2, + ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3, + ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4, + ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 +}; + +/* + * Cortex-A8 HW events mapping + * + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, +}; + +static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * Only ITLB misses and DTLB refills are supported. + * If users want the DTLB refills misses a raw counter + * must be used. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* + * Cortex-A9 HW events mapping + */ +static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = + ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, +}; + +static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * Only ITLB misses and DTLB refills are supported. + * If users want the DTLB refills misses a raw counter + * must be used. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* + * Perf Events counters + */ +enum armv7_counters { + ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ + ARMV7_COUNTER0 = 2, /* First event counter */ +}; + +/* + * The cycle counter is ARMV7_CYCLE_COUNTER. + * The first event counter is ARMV7_COUNTER0. + * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). + */ +#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) + +/* + * ARMv7 low level PMNC access + */ + +/* + * Per-CPU PMNC: config reg + */ +#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ +#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ +#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ +#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ +#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ +#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ +#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ +#define ARMV7_PMNC_N_MASK 0x1f +#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ + +/* + * Available counters + */ +#define ARMV7_CNT0 0 /* First event counter */ +#define ARMV7_CCNT 31 /* Cycle counter */ + +/* Perf Event to low level counters mapping */ +#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) + +/* + * CNTENS: counters enable reg + */ +#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_CNTENS_C (1 << ARMV7_CCNT) + +/* + * CNTENC: counters disable reg + */ +#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_CNTENC_C (1 << ARMV7_CCNT) + +/* + * INTENS: counters overflow interrupt enable reg + */ +#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_INTENS_C (1 << ARMV7_CCNT) + +/* + * INTENC: counters overflow interrupt disable reg + */ +#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_INTENC_C (1 << ARMV7_CCNT) + +/* + * EVTSEL: Event selection reg + */ +#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ + +/* + * SELECT: Counter selection reg + */ +#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ + +/* + * FLAG: counters overflow flag status reg + */ +#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_FLAG_C (1 << ARMV7_CCNT) +#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ +#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK + +static inline unsigned long armv7_pmnc_read(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); + return val; +} + +static inline void armv7_pmnc_write(unsigned long val) +{ + val &= ARMV7_PMNC_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); +} + +static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) +{ + return pmnc & ARMV7_OVERFLOWED_MASK; +} + +static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, + enum armv7_counters counter) +{ + int ret = 0; + + if (counter == ARMV7_CYCLE_COUNTER) + ret = pmnc & ARMV7_FLAG_C; + else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) + ret = pmnc & ARMV7_FLAG_P(counter); + else + pr_err("CPU%u checking wrong counter %d overflow status\n", + smp_processor_id(), counter); + + return ret; +} + +static inline int armv7_pmnc_select_counter(unsigned int idx) +{ + u32 val; + + if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { + pr_err("CPU%u selecting wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); + + return idx; +} + +static inline u32 armv7pmu_read_counter(int idx) +{ + unsigned long value = 0; + + if (idx == ARMV7_CYCLE_COUNTER) + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); + else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { + if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mrc p15, 0, %0, c9, c13, 2" + : "=r" (value)); + } else + pr_err("CPU%u reading wrong counter %d\n", + smp_processor_id(), idx); + + return value; +} + +static inline void armv7pmu_write_counter(int idx, u32 value) +{ + if (idx == ARMV7_CYCLE_COUNTER) + asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); + else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { + if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mcr p15, 0, %0, c9, c13, 2" + : : "r" (value)); + } else + pr_err("CPU%u writing wrong counter %d\n", + smp_processor_id(), idx); +} + +static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) +{ + if (armv7_pmnc_select_counter(idx) == idx) { + val &= ARMV7_EVTSEL_MASK; + asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); + } +} + +static inline u32 armv7_pmnc_enable_counter(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u enabling wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_CNTENS_C; + else + val = ARMV7_CNTENS_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_disable_counter(unsigned int idx) +{ + u32 val; + + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u disabling wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_CNTENC_C; + else + val = ARMV7_CNTENC_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_enable_intens(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u enabling wrong PMNC counter" + " interrupt enable %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_INTENS_C; + else + val = ARMV7_INTENS_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_disable_intens(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u disabling wrong PMNC counter" + " interrupt enable %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_INTENC_C; + else + val = ARMV7_INTENC_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_getreset_flags(void) +{ + u32 val; + + /* Read */ + asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); + + /* Write to clear flags */ + val &= ARMV7_FLAG_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); + + return val; +} + +#ifdef DEBUG +static void armv7_pmnc_dump_regs(void) +{ + u32 val; + unsigned int cnt; + + printk(KERN_INFO "PMNC registers dump:\n"); + + asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); + printk(KERN_INFO "PMNC =0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); + printk(KERN_INFO "CNTENS=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); + printk(KERN_INFO "INTENS=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); + printk(KERN_INFO "FLAGS =0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); + printk(KERN_INFO "SELECT=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); + printk(KERN_INFO "CCNT =0x%08x\n", val); + + for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { + armv7_pmnc_select_counter(cnt); + asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); + printk(KERN_INFO "CNT[%d] count =0x%08x\n", + cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); + printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", + cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + } +} +#endif + +void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags; + + /* + * Enable counter and interrupt, and set the counter to count + * the event that we're interested in. + */ + spin_lock_irqsave(&pmu_lock, flags); + + /* + * Disable counter + */ + armv7_pmnc_disable_counter(idx); + + /* + * Set event (if destined for PMNx counters) + * We don't need to set the event if it's a cycle count + */ + if (idx != ARMV7_CYCLE_COUNTER) + armv7_pmnc_write_evtsel(idx, hwc->config_base); + + /* + * Enable interrupt for this counter + */ + armv7_pmnc_enable_intens(idx); + + /* + * Enable counter + */ + armv7_pmnc_enable_counter(idx); + + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags; + + /* + * Disable counter and interrupt + */ + spin_lock_irqsave(&pmu_lock, flags); + + /* + * Disable counter + */ + armv7_pmnc_disable_counter(idx); + + /* + * Disable interrupt for this counter + */ + armv7_pmnc_disable_intens(idx); + + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* + * Get and reset the IRQ flags + */ + pmnc = armv7_pmnc_getreset_flags(); + + /* + * Did an overflow occur? + */ + if (!armv7_pmnc_has_overflowed(pmnc)) + return IRQ_NONE; + + /* + * Handle the counter(s) overflow(s) + */ + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + /* + * We have a single interrupt for all counters. Check that + * each counter has overflowed before we process it. + */ + if (!armv7_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + /* + * Handle the pending perf events. + * + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this + * will not work. + */ + irq_work_run(); + + return IRQ_HANDLED; +} + +static void armv7pmu_start(void) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_lock, flags); + /* Enable all counters */ + armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void armv7pmu_stop(void) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_lock, flags); + /* Disable all counters */ + armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + int idx; + + /* Always place a cycle counter into the cycle counter. */ + if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { + if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return ARMV7_CYCLE_COUNTER; + } else { + /* + * For anything other than a cycle counter, try and use + * the events counters + */ + for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { + if (!test_and_set_bit(idx, cpuc->used_mask)) + return idx; + } + + /* The counters are all in use. */ + return -EAGAIN; + } +} + +static struct arm_pmu armv7pmu = { + .handle_irq = armv7pmu_handle_irq, + .enable = armv7pmu_enable_event, + .disable = armv7pmu_disable_event, + .read_counter = armv7pmu_read_counter, + .write_counter = armv7pmu_write_counter, + .get_event_idx = armv7pmu_get_event_idx, + .start = armv7pmu_start, + .stop = armv7pmu_stop, + .raw_event_mask = 0xFF, + .max_period = (1LLU << 32) - 1, +}; + +static u32 __init armv7_reset_read_pmnc(void) +{ + u32 nb_cnt; + + /* Initialize & Reset PMNC: C and P bits */ + armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); + + /* Read the nb of CNTx counters supported from PMNC */ + nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; + + /* Add the CPU cycles counter and return */ + return nb_cnt + 1; +} + +const struct arm_pmu *__init armv7_a8_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA8; + armv7pmu.name = "ARMv7 Cortex-A8"; + armv7pmu.cache_map = &armv7_a8_perf_cache_map; + armv7pmu.event_map = &armv7_a8_perf_map; + armv7pmu.num_events = armv7_reset_read_pmnc(); + return &armv7pmu; +} + +const struct arm_pmu *__init armv7_a9_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA9; + armv7pmu.name = "ARMv7 Cortex-A9"; + armv7pmu.cache_map = &armv7_a9_perf_cache_map; + armv7pmu.event_map = &armv7_a9_perf_map; + armv7pmu.num_events = armv7_reset_read_pmnc(); + return &armv7pmu; +} +#else +const struct arm_pmu *__init armv7_a8_pmu_init(void) +{ + return NULL; +} + +const struct arm_pmu *__init armv7_a9_pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c new file mode 100644 index 00000000000..4e9592789d4 --- /dev/null +++ b/arch/arm/kernel/perf_event_xscale.c @@ -0,0 +1,807 @@ +/* + * ARMv5 [xscale] Performance counter handling code. + * + * Copyright (C) 2010, ARM Ltd., Will Deacon + * + * Based on the previous xscale OProfile code. + * + * There are two variants of the xscale PMU that we support: + * - xscale1pmu: 2 event counters and a cycle counter + * - xscale2pmu: 4 event counters and a cycle counter + * The two variants share event definitions, but have different + * PMU structures. + */ + +#ifdef CONFIG_CPU_XSCALE +enum xscale_perf_types { + XSCALE_PERFCTR_ICACHE_MISS = 0x00, + XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, + XSCALE_PERFCTR_DATA_STALL = 0x02, + XSCALE_PERFCTR_ITLB_MISS = 0x03, + XSCALE_PERFCTR_DTLB_MISS = 0x04, + XSCALE_PERFCTR_BRANCH = 0x05, + XSCALE_PERFCTR_BRANCH_MISS = 0x06, + XSCALE_PERFCTR_INSTRUCTION = 0x07, + XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, + XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, + XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, + XSCALE_PERFCTR_DCACHE_MISS = 0x0B, + XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, + XSCALE_PERFCTR_PC_CHANGED = 0x0D, + XSCALE_PERFCTR_BCU_REQUEST = 0x10, + XSCALE_PERFCTR_BCU_FULL = 0x11, + XSCALE_PERFCTR_BCU_DRAIN = 0x12, + XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, + XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, + XSCALE_PERFCTR_RMW = 0x16, + /* XSCALE_PERFCTR_CCNT is not hardware defined */ + XSCALE_PERFCTR_CCNT = 0xFE, + XSCALE_PERFCTR_UNUSED = 0xFF, +}; + +enum xscale_counters { + XSCALE_CYCLE_COUNTER = 1, + XSCALE_COUNTER0, + XSCALE_COUNTER1, + XSCALE_COUNTER2, + XSCALE_COUNTER3, +}; + +static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, + [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, + [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +#define XSCALE_PMU_ENABLE 0x001 +#define XSCALE_PMN_RESET 0x002 +#define XSCALE_CCNT_RESET 0x004 +#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) +#define XSCALE_PMU_CNT64 0x008 + +#define XSCALE1_OVERFLOWED_MASK 0x700 +#define XSCALE1_CCOUNT_OVERFLOW 0x400 +#define XSCALE1_COUNT0_OVERFLOW 0x100 +#define XSCALE1_COUNT1_OVERFLOW 0x200 +#define XSCALE1_CCOUNT_INT_EN 0x040 +#define XSCALE1_COUNT0_INT_EN 0x010 +#define XSCALE1_COUNT1_INT_EN 0x020 +#define XSCALE1_COUNT0_EVT_SHFT 12 +#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) +#define XSCALE1_COUNT1_EVT_SHFT 20 +#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) + +static inline u32 +xscale1pmu_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); + return val; +} + +static inline void +xscale1pmu_write_pmnc(u32 val) +{ + /* upper 4bits and 7, 11 are write-as-0 */ + val &= 0xffff77f; + asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); +} + +static inline int +xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, + enum xscale_counters counter) +{ + int ret = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; + break; + case XSCALE_COUNTER0: + ret = pmnc & XSCALE1_COUNT0_OVERFLOW; + break; + case XSCALE_COUNTER1: + ret = pmnc & XSCALE1_COUNT1_OVERFLOW; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + } + + return ret; +} + +static irqreturn_t +xscale1pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* + * NOTE: there's an A stepping erratum that states if an overflow + * bit already exists and another occurs, the previous + * Overflow bit gets cleared. There's no workaround. + * Fixed in B stepping or later. + */ + pmnc = xscale1pmu_read_pmnc(); + + /* + * Write the value back to clear the overflow flags. Overflow + * flags remain in pmnc for use below. We also disable the PMU + * while we process the interrupt. + */ + xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); + + if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) + return IRQ_NONE; + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + irq_work_run(); + + /* + * Re-enable the PMU. + */ + pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(pmnc); + + return IRQ_HANDLED; +} + +static void +xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long val, mask, evt, flags; + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + mask = 0; + evt = XSCALE1_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + mask = XSCALE1_COUNT0_EVT_MASK; + evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | + XSCALE1_COUNT0_INT_EN; + break; + case XSCALE_COUNTER1: + mask = XSCALE1_COUNT1_EVT_MASK; + evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | + XSCALE1_COUNT1_INT_EN; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~mask; + val |= evt; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long val, mask, evt, flags; + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + mask = XSCALE1_CCOUNT_INT_EN; + evt = 0; + break; + case XSCALE_COUNTER0: + mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; + evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; + evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~mask; + val |= evt; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + if (XSCALE_PERFCTR_CCNT == event->config_base) { + if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return XSCALE_CYCLE_COUNTER; + } else { + if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) + return XSCALE_COUNTER1; + + if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) + return XSCALE_COUNTER0; + + return -EAGAIN; + } +} + +static void +xscale1pmu_start(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val |= XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale1pmu_stop(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static inline u32 +xscale1pmu_read_counter(int counter) +{ + u32 val = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); + break; + } + + return val; +} + +static inline void +xscale1pmu_write_counter(int counter, u32 val) +{ + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); + break; + } +} + +static const struct arm_pmu xscale1pmu = { + .id = ARM_PERF_PMU_ID_XSCALE1, + .name = "xscale1", + .handle_irq = xscale1pmu_handle_irq, + .enable = xscale1pmu_enable_event, + .disable = xscale1pmu_disable_event, + .read_counter = xscale1pmu_read_counter, + .write_counter = xscale1pmu_write_counter, + .get_event_idx = xscale1pmu_get_event_idx, + .start = xscale1pmu_start, + .stop = xscale1pmu_stop, + .cache_map = &xscale_perf_cache_map, + .event_map = &xscale_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +const struct arm_pmu *__init xscale1pmu_init(void) +{ + return &xscale1pmu; +} + +#define XSCALE2_OVERFLOWED_MASK 0x01f +#define XSCALE2_CCOUNT_OVERFLOW 0x001 +#define XSCALE2_COUNT0_OVERFLOW 0x002 +#define XSCALE2_COUNT1_OVERFLOW 0x004 +#define XSCALE2_COUNT2_OVERFLOW 0x008 +#define XSCALE2_COUNT3_OVERFLOW 0x010 +#define XSCALE2_CCOUNT_INT_EN 0x001 +#define XSCALE2_COUNT0_INT_EN 0x002 +#define XSCALE2_COUNT1_INT_EN 0x004 +#define XSCALE2_COUNT2_INT_EN 0x008 +#define XSCALE2_COUNT3_INT_EN 0x010 +#define XSCALE2_COUNT0_EVT_SHFT 0 +#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) +#define XSCALE2_COUNT1_EVT_SHFT 8 +#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) +#define XSCALE2_COUNT2_EVT_SHFT 16 +#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) +#define XSCALE2_COUNT3_EVT_SHFT 24 +#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) + +static inline u32 +xscale2pmu_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); + /* bits 1-2 and 4-23 are read-unpredictable */ + return val & 0xff000009; +} + +static inline void +xscale2pmu_write_pmnc(u32 val) +{ + /* bits 4-23 are write-as-0, 24-31 are write ignored */ + val &= 0xf; + asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); +} + +static inline u32 +xscale2pmu_read_overflow_flags(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); + return val; +} + +static inline void +xscale2pmu_write_overflow_flags(u32 val) +{ + asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); +} + +static inline u32 +xscale2pmu_read_event_select(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); + return val; +} + +static inline void +xscale2pmu_write_event_select(u32 val) +{ + asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); +} + +static inline u32 +xscale2pmu_read_int_enable(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); + return val; +} + +static void +xscale2pmu_write_int_enable(u32 val) +{ + asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); +} + +static inline int +xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, + enum xscale_counters counter) +{ + int ret = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; + break; + case XSCALE_COUNTER0: + ret = of_flags & XSCALE2_COUNT0_OVERFLOW; + break; + case XSCALE_COUNTER1: + ret = of_flags & XSCALE2_COUNT1_OVERFLOW; + break; + case XSCALE_COUNTER2: + ret = of_flags & XSCALE2_COUNT2_OVERFLOW; + break; + case XSCALE_COUNTER3: + ret = of_flags & XSCALE2_COUNT3_OVERFLOW; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + } + + return ret; +} + +static irqreturn_t +xscale2pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc, of_flags; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* Disable the PMU. */ + pmnc = xscale2pmu_read_pmnc(); + xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); + + /* Check the overflow flag register. */ + of_flags = xscale2pmu_read_overflow_flags(); + if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) + return IRQ_NONE; + + /* Clear the overflow bits. */ + xscale2pmu_write_overflow_flags(of_flags); + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + irq_work_run(); + + /* + * Re-enable the PMU. + */ + pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(pmnc); + + return IRQ_HANDLED; +} + +static void +xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags, ien, evtsel; + + ien = xscale2pmu_read_int_enable(); + evtsel = xscale2pmu_read_event_select(); + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + ien |= XSCALE2_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + ien |= XSCALE2_COUNT0_INT_EN; + evtsel &= ~XSCALE2_COUNT0_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + ien |= XSCALE2_COUNT1_INT_EN; + evtsel &= ~XSCALE2_COUNT1_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; + break; + case XSCALE_COUNTER2: + ien |= XSCALE2_COUNT2_INT_EN; + evtsel &= ~XSCALE2_COUNT2_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; + break; + case XSCALE_COUNTER3: + ien |= XSCALE2_COUNT3_INT_EN; + evtsel &= ~XSCALE2_COUNT3_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + xscale2pmu_write_event_select(evtsel); + xscale2pmu_write_int_enable(ien); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags, ien, evtsel; + + ien = xscale2pmu_read_int_enable(); + evtsel = xscale2pmu_read_event_select(); + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + ien &= ~XSCALE2_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + ien &= ~XSCALE2_COUNT0_INT_EN; + evtsel &= ~XSCALE2_COUNT0_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + ien &= ~XSCALE2_COUNT1_INT_EN; + evtsel &= ~XSCALE2_COUNT1_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + break; + case XSCALE_COUNTER2: + ien &= ~XSCALE2_COUNT2_INT_EN; + evtsel &= ~XSCALE2_COUNT2_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + break; + case XSCALE_COUNTER3: + ien &= ~XSCALE2_COUNT3_INT_EN; + evtsel &= ~XSCALE2_COUNT3_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + xscale2pmu_write_event_select(evtsel); + xscale2pmu_write_int_enable(ien); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + int idx = xscale1pmu_get_event_idx(cpuc, event); + if (idx >= 0) + goto out; + + if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) + idx = XSCALE_COUNTER3; + else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) + idx = XSCALE_COUNTER2; +out: + return idx; +} + +static void +xscale2pmu_start(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; + val |= XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale2pmu_stop(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale2pmu_read_pmnc(); + val &= ~XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static inline u32 +xscale2pmu_read_counter(int counter) +{ + u32 val = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER2: + asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER3: + asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); + break; + } + + return val; +} + +static inline void +xscale2pmu_write_counter(int counter, u32 val) +{ + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER2: + asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER3: + asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); + break; + } +} + +static const struct arm_pmu xscale2pmu = { + .id = ARM_PERF_PMU_ID_XSCALE2, + .name = "xscale2", + .handle_irq = xscale2pmu_handle_irq, + .enable = xscale2pmu_enable_event, + .disable = xscale2pmu_disable_event, + .read_counter = xscale2pmu_read_counter, + .write_counter = xscale2pmu_write_counter, + .get_event_idx = xscale2pmu_get_event_idx, + .start = xscale2pmu_start, + .stop = xscale2pmu_stop, + .cache_map = &xscale_perf_cache_map, + .event_map = &xscale_perf_map, + .raw_event_mask = 0xFF, + .num_events = 5, + .max_period = (1LLU << 32) - 1, +}; + +const struct arm_pmu *__init xscale2pmu_init(void) +{ + return &xscale2pmu; +} +#else +const struct arm_pmu *__init xscale1pmu_init(void) +{ + return NULL; +} + +const struct arm_pmu *__init xscale2pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_XSCALE */ -- 2.11.4.GIT