From 327933f5d6cdf083284d3c06e0370d1de464aef4 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sat, 11 Jul 2009 00:29:03 +0000 Subject: [PATCH] sh: Function graph tracer support Add both dynamic and static function graph tracer support for sh. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 + arch/sh/include/asm/ftrace.h | 3 + arch/sh/kernel/Makefile_32 | 1 + arch/sh/kernel/ftrace.c | 122 ++++++++++++++++++++++++++++++++++++++++ arch/sh/kernel/vmlinux_64.lds.S | 0 arch/sh/lib/Makefile | 1 + arch/sh/lib/mcount.S | 117 +++++++++++++++++++++++++++++++++++++- 7 files changed, 244 insertions(+), 1 deletion(-) create mode 100644 arch/sh/kernel/vmlinux_64.lds.S diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 29e41ec6537..6d110a4f7f6 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -33,6 +33,7 @@ config SUPERH32 select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_FTRACE_SYSCALLS + select HAVE_FUNCTION_GRAPH_TRACER select HAVE_ARCH_KGDB select ARCH_HIBERNATION_POSSIBLE if MMU diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h index b09311ad1db..7e0bcc4d4a9 100644 --- a/arch/sh/include/asm/ftrace.h +++ b/arch/sh/include/asm/ftrace.h @@ -13,8 +13,11 @@ extern void mcount(void); #ifdef CONFIG_DYNAMIC_FTRACE #define CALL_ADDR ((long)(ftrace_call)) #define STUB_ADDR ((long)(ftrace_stub)) +#define GRAPH_ADDR ((long)(ftrace_graph_call)) +#define CALLER_ADDR ((long)(ftrace_caller)) #define MCOUNT_INSN_OFFSET ((STUB_ADDR - CALL_ADDR) - 4) +#define GRAPH_INSN_OFFSET ((CALLER_ADDR - GRAPH_ADDR) - 4) struct dyn_arch_ftrace { /* No extra data needed on sh */ diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index fee924a9c46..94ed99b6800 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -30,6 +30,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o +obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_DUMP_CODE) += disassemble.o obj-$(CONFIG_HIBERNATION) += swsusp.o diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c index 4f62eced0ae..6647dfcb781 100644 --- a/arch/sh/kernel/ftrace.c +++ b/arch/sh/kernel/ftrace.c @@ -16,11 +16,13 @@ #include #include #include +#include #include #include #include #include +#ifdef CONFIG_DYNAMIC_FTRACE static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE]; static unsigned char ftrace_nop[4]; @@ -133,6 +135,126 @@ int __init ftrace_dyn_arch_init(void *data) return 0; } +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#ifdef CONFIG_DYNAMIC_FTRACE +extern void ftrace_graph_call(void); + +static int ftrace_mod(unsigned long ip, unsigned long old_addr, + unsigned long new_addr) +{ + unsigned char code[MCOUNT_INSN_SIZE]; + + if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE)) + return -EFAULT; + + if (old_addr != __raw_readl((unsigned long *)code)) + return -EINVAL; + + __raw_writel(new_addr, ip); + return 0; +} + +int ftrace_enable_ftrace_graph_caller(void) +{ + unsigned long ip, old_addr, new_addr; + + ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET; + old_addr = (unsigned long)(&skip_trace); + new_addr = (unsigned long)(&ftrace_graph_caller); + + return ftrace_mod(ip, old_addr, new_addr); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + unsigned long ip, old_addr, new_addr; + + ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET; + old_addr = (unsigned long)(&ftrace_graph_caller); + new_addr = (unsigned long)(&skip_trace); + + return ftrace_mod(ip, old_addr, new_addr); +} +#endif /* CONFIG_DYNAMIC_FTRACE */ + +/* + * Hook the return address and push it in the stack of return addrs + * in the current thread info. + * + * This is the main routine for the function graph tracer. The function + * graph tracer essentially works like this: + * + * parent is the stack address containing self_addr's return address. + * We pull the real return address out of parent and store it in + * current's ret_stack. Then, we replace the return address on the stack + * with the address of return_to_handler. self_addr is the function that + * called mcount. + * + * When self_addr returns, it will jump to return_to_handler which calls + * ftrace_return_to_handler. ftrace_return_to_handler will pull the real + * return address off of current's ret_stack and jump to it. + */ +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) +{ + unsigned long old; + int faulted, err; + struct ftrace_graph_ent trace; + unsigned long return_hooker = (unsigned long)&return_to_handler; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* + * Protect against fault, even if it shouldn't + * happen. This tool is too much intrusive to + * ignore such a protection. + */ + __asm__ __volatile__( + "1: \n\t" + "mov.l @%2, %0 \n\t" + "2: \n\t" + "mov.l %3, @%2 \n\t" + "mov #0, %1 \n\t" + "3: \n\t" + ".section .fixup, \"ax\" \n\t" + "4: \n\t" + "mov.l 5f, %0 \n\t" + "jmp @%0 \n\t" + " mov #1, %1 \n\t" + ".balign 4 \n\t" + "5: .long 3b \n\t" + ".previous \n\t" + ".section __ex_table,\"a\" \n\t" + ".long 1b, 4b \n\t" + ".long 2b, 4b \n\t" + ".previous \n\t" + : "=&r" (old), "=r" (faulted) + : "r" (parent), "r" (return_hooker) + ); + + if (unlikely(faulted)) { + ftrace_graph_stop(); + WARN_ON(1); + return; + } + + err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0); + if (err == -EBUSY) { + __raw_writel(old, parent); + return; + } + + trace.func = self_addr; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + __raw_writel(old, parent); + } +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ #ifdef CONFIG_FTRACE_SYSCALLS diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S new file mode 100644 index 00000000000..e69de29bb2d diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index aaea580b65b..19328d90a2d 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -25,6 +25,7 @@ memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o lib-$(CONFIG_MMU) += copy_page.o clear_page.o lib-$(CONFIG_FUNCTION_TRACER) += mcount.o +lib-$(CONFIG_FUNCTION_GRAPH_TRACER) += mcount.o lib-y += $(memcpy-y) $(udivsi3-y) EXTRA_CFLAGS += -Werror diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S index 8596483f7b4..bd3ec648bec 100644 --- a/arch/sh/lib/mcount.S +++ b/arch/sh/lib/mcount.S @@ -111,14 +111,62 @@ mcount_call: jsr @r6 nop +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + mov.l .Lftrace_graph_return, r6 + mov.l .Lftrace_stub, r7 + cmp/eq r6, r7 + bt 1f + + mov.l .Lftrace_graph_caller, r0 + jmp @r0 + nop + +1: + mov.l .Lftrace_graph_entry, r6 + mov.l .Lftrace_graph_entry_stub, r7 + cmp/eq r6, r7 + bt skip_trace + + mov.l .Lftrace_graph_caller, r0 + jmp @r0 + nop + + .align 2 +.Lftrace_graph_return: + .long ftrace_graph_return +.Lftrace_graph_entry: + .long ftrace_graph_entry +.Lftrace_graph_entry_stub: + .long ftrace_graph_entry_stub +.Lftrace_graph_caller: + .long ftrace_graph_caller +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + + .globl skip_trace skip_trace: MCOUNT_LEAVE() .align 2 .Lftrace_trace_function: - .long ftrace_trace_function + .long ftrace_trace_function #ifdef CONFIG_DYNAMIC_FTRACE +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* + * NOTE: Do not move either ftrace_graph_call or ftrace_caller + * as this will affect the calculation of GRAPH_INSN_OFFSET. + */ + .globl ftrace_graph_call +ftrace_graph_call: + mov.l .Lskip_trace, r0 + jmp @r0 + nop + + .align 2 +.Lskip_trace: + .long skip_trace +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + .globl ftrace_caller ftrace_caller: mov.l .Lfunction_trace_stop, r0 @@ -136,7 +184,12 @@ ftrace_call: jsr @r6 nop +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + bra ftrace_graph_call + nop +#else MCOUNT_LEAVE() +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ #endif /* CONFIG_DYNAMIC_FTRACE */ /* @@ -188,3 +241,65 @@ stack_panic: .Lpanic_str: .string "Stack error" #endif /* CONFIG_STACK_DEBUG */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_caller +ftrace_graph_caller: + mov.l 2f, r0 + mov.l @r0, r0 + tst r0, r0 + bt 1f + + mov.l 3f, r1 + jmp @r1 + nop +1: + /* + * MCOUNT_ENTER() pushed 5 registers onto the stack, so + * the stack address containing our return address is + * r15 + 20. + */ + mov #20, r0 + add r15, r0 + mov r0, r4 + + mov.l .Lprepare_ftrace_return, r0 + jsr @r0 + nop + + MCOUNT_LEAVE() + + .align 2 +2: .long function_trace_stop +3: .long skip_trace +.Lprepare_ftrace_return: + .long prepare_ftrace_return + + .globl return_to_handler +return_to_handler: + /* + * Save the return values. + */ + mov.l r0, @-r15 + mov.l r1, @-r15 + + mov #0, r4 + + mov.l .Lftrace_return_to_handler, r0 + jsr @r0 + nop + + /* + * The return value from ftrace_return_handler has the real + * address that we should return to. + */ + lds r0, pr + mov.l @r15+, r1 + rts + mov.l @r15+, r0 + + + .align 2 +.Lftrace_return_to_handler: + .long ftrace_return_to_handler +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ -- 2.11.4.GIT