From 19524d77ec34faf58d313ba34fb755ef6e159216 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:39:13 +0000 Subject: [PATCH] ARM: PL08x: avoid duplicating registers in txd and phychan structures As we now have all the code accessing the phychan {csrc,cdst,clli,cctl, ccfg} members in one function, there's no point storing the data into the struct. Get rid of the struct members. Re-order the register dump in the dev_dbg() to reflect the order we write the registers to the DMA device. The txd {csrc,cdst,clli,cctl} values are duplicates of the lli[0] values, so there's no point duplicating these either. Program the DMAC registers directly from the lli[0] values. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 57 ++++++++++++++++------------------------------ include/linux/amba/pl08x.h | 13 ----------- 2 files changed, 19 insertions(+), 51 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c025a4b4bae..a1a18bde6b7 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -193,33 +193,25 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, { struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - u32 val; + struct pl08x_lli *lli = &txd->llis_va[0]; + u32 val, ccfg; plchan->at = txd; - /* Copy the basic control register calculated at transfer config */ - phychan->csrc = txd->csrc; - phychan->cdst = txd->cdst; - phychan->clli = txd->clli; - phychan->cctl = txd->cctl; - /* Assign the signal to the proper control registers */ - phychan->ccfg = plchan->cd->ccfg; - phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK; - phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK; + ccfg = plchan->cd->ccfg; + ccfg &= ~(PL080_CONFIG_SRC_SEL_MASK | PL080_CONFIG_DST_SEL_MASK); + /* If it wasn't set from AMBA, ignore it */ if (txd->direction == DMA_TO_DEVICE) /* Select signal as destination */ - phychan->ccfg |= - (phychan->signal << PL080_CONFIG_DST_SEL_SHIFT); + ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT; else if (txd->direction == DMA_FROM_DEVICE) /* Select signal as source */ - phychan->ccfg |= - (phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT); - /* Always enable error interrupts */ - phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK; - /* Always enable terminal interrupts */ - phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK; + ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT; + + /* Always enable error and terminal interrupts */ + ccfg |= PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK; /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) @@ -227,19 +219,15 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, dev_vdbg(&pl08x->adev->dev, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", - phychan->id, - phychan->csrc, - phychan->cdst, - phychan->cctl, - phychan->clli, - phychan->ccfg); - - writel(phychan->csrc, phychan->base + PL080_CH_SRC_ADDR); - writel(phychan->cdst, phychan->base + PL080_CH_DST_ADDR); - writel(phychan->clli, phychan->base + PL080_CH_LLI); - writel(phychan->cctl, phychan->base + PL080_CH_CONTROL); - writel(phychan->ccfg, phychan->base + PL080_CH_CONFIG); + "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", + phychan->id, lli->src, lli->dst, lli->lli, lli->cctl, + ccfg); + + writel(lli->src, phychan->base + PL080_CH_SRC_ADDR); + writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); + writel(lli->lli, phychan->base + PL080_CH_LLI); + writel(lli->cctl, phychan->base + PL080_CH_CONTROL); + writel(ccfg, phychan->base + PL080_CH_CONFIG); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -920,13 +908,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, */ llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; - /* Now store the channel register values */ - txd->csrc = llis_va[0].src; - txd->cdst = llis_va[0].dst; - txd->clli = llis_va[0].lli; - txd->cctl = llis_va[0].cctl; - /* ccfg will be set at physical channel allocation time */ - #ifdef VERBOSE_DEBUG { int i; diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 2c834ed5f41..29d974562df 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -95,11 +95,6 @@ struct pl08x_phy_chan { spinlock_t lock; int signal; struct pl08x_dma_chan *serving; - u32 csrc; - u32 cdst; - u32 clli; - u32 cctl; - u32 ccfg; }; /** @@ -118,14 +113,6 @@ struct pl08x_txd { void *llis_va; struct pl08x_channel_data *cd; bool active; - /* - * Settings to be put into the physical channel when we - * trigger this txd - */ - u32 csrc; - u32 cdst; - u32 clli; - u32 cctl; }; /** -- 2.11.4.GIT