[PATCH] ACPI: fix cpufreq regression

[PATCH] ACPI: fix cpufreq regression

recently cpufreq support on my laptop (Lenovo T60) broke completely:
when it's plugged into AC it would never go higher than 1 GHz - neither
1.3 GHz nor 1.83 GHz is possible - no matter which governor (userspace,
speed or ondemand) is used.

after some cpufreq debugging i tracked the regression back to the
following (totally correct) bug-fix commit:

   commit 0916bd3ebb7cefdd0f432e8491abe24f4b5a101e
   Author: Dave Jones <davej@redhat.com>
   Date:   Wed Nov 22 20:42:01 2006 -0500

    [PATCH] Correct bound checking from the value returned from _PPC method.

this bugfix, which makes other laptops work, made a previously hidden
(BIOS) bug visible on my laptop.

The bug is the following: if the _PPC (Performance Present Capabilities)
optional ACPI object is queried /after/ bootup then the BIOS reports an
incorrect value of '2'.

My laptop (Lenovo T60) has the following performance states supported:

   0: 1833000
   1: 1333000
   2: 1000000

Per ACPI specification, a _PPC value of '0' means that all 3 performance
states are usable. A _PPC value of '1' means states 1 .. 2 are usable, a
value of '2' means only state '2' (slowest) is usable.

now, the _PPC object is optional, and it also comes with notification.
Furthermore, when a CPU object is initialized, the _PPC object is
initialized as well. So the following evaluation of the _PPC object is
superfluous:

 [<c028ba5f>] acpi_processor_get_platform_limit+0xa1/0xaf
 [<c028c040>] acpi_processor_register_performance+0x3b9/0x3ef
 [<c0111a85>] acpi_cpufreq_cpu_init+0xb7/0x596
 [<c03dab74>] cpufreq_add_dev+0x160/0x4a8
 [<c02bed90>] sysdev_driver_register+0x5a/0xa0
 [<c03d9c4c>] cpufreq_register_driver+0xb4/0x176
 [<c068ac08>] acpi_cpufreq_init+0xe5/0xeb
 [<c010056e>] init+0x14f/0x3dd

and this is the point where my laptop's BIOS returns the incorrect value
of '2'. Note that it has not sent any notification event, so the value
is probably not really intentional (possibly spurious), and Windows
likely doesnt query it after bootup either. Maybe the value is kept at
'2' normally, and is only set to the real value when a true asynchronous
event (such as AC plug event, battery switch, etc.) occurs.

So i /think/ this is a grey area of the ACPI spec: per the letter of the
spec the _PPC value only changes when notified, so there's no reason to
query it after the system has booted up. So in my opinion the best (and
most compatible) strategy would be to do the change below, and to not
evaluate the _PPC object in the acpi_processor_get_performance_info()
call, but only evaluate it if _PPC is present during CPU object init, or
if it's notified during an asynchronous event. This change is more
permissive than the previous logic, so it definitely shouldnt break any
existing system.

This also happens to fix my laptop, which is merrily chugging along at
1.83 GHz now. Yay!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@redhat.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>