1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/slab.h>
36 #include <linux/dma-mapping.h>
37 #include <linux/delay.h>
38 #include <linux/sched.h>
39 #include <linux/skbuff.h>
40 #include <linux/netdevice.h>
41 #include <linux/wireless.h>
42 #include <linux/firmware.h>
43 #include <linux/etherdevice.h>
44 #include <linux/if_arp.h>
46 #include <net/mac80211.h>
48 #include <asm/div64.h>
50 #include "iwl-eeprom.h"
54 #include "iwl-helpers.h"
56 #include "iwl-agn-calib.h"
59 #include "iwl-trans.h"
61 /******************************************************************************
65 ******************************************************************************/
68 * module name, copyright, version, etc.
70 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
72 #ifdef CONFIG_IWLWIFI_DEBUG
78 #define DRV_VERSION IWLWIFI_VERSION VD
81 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
82 MODULE_VERSION(DRV_VERSION
);
83 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
84 MODULE_LICENSE("GPL");
86 static int iwlagn_ant_coupling
;
87 static bool iwlagn_bt_ch_announce
= 1;
89 void iwl_update_chain_flags(struct iwl_priv
*priv
)
91 struct iwl_rxon_context
*ctx
;
93 for_each_context(priv
, ctx
) {
94 iwlagn_set_rxon_chain(priv
, ctx
);
95 if (ctx
->active
.rx_chain
!= ctx
->staging
.rx_chain
)
96 iwlagn_commit_rxon(priv
, ctx
);
100 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
101 static void iwl_set_beacon_tim(struct iwl_priv
*priv
,
102 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
,
103 u8
*beacon
, u32 frame_size
)
106 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*)beacon
;
109 * The index is relative to frame start but we start looking at the
110 * variable-length part of the beacon.
112 tim_idx
= mgmt
->u
.beacon
.variable
- beacon
;
114 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
115 while ((tim_idx
< (frame_size
- 2)) &&
116 (beacon
[tim_idx
] != WLAN_EID_TIM
))
117 tim_idx
+= beacon
[tim_idx
+1] + 2;
119 /* If TIM field was found, set variables */
120 if ((tim_idx
< (frame_size
- 1)) && (beacon
[tim_idx
] == WLAN_EID_TIM
)) {
121 tx_beacon_cmd
->tim_idx
= cpu_to_le16(tim_idx
);
122 tx_beacon_cmd
->tim_size
= beacon
[tim_idx
+1];
124 IWL_WARN(priv
, "Unable to find TIM Element in beacon\n");
127 int iwlagn_send_beacon_cmd(struct iwl_priv
*priv
)
129 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
;
130 struct iwl_host_cmd cmd
= {
131 .id
= REPLY_TX_BEACON
,
133 struct ieee80211_tx_info
*info
;
139 * We have to set up the TX command, the TX Beacon command, and the
143 lockdep_assert_held(&priv
->mutex
);
145 if (!priv
->beacon_ctx
) {
146 IWL_ERR(priv
, "trying to build beacon w/o beacon context!\n");
150 if (WARN_ON(!priv
->beacon_skb
))
153 /* Allocate beacon command */
154 if (!priv
->beacon_cmd
)
155 priv
->beacon_cmd
= kzalloc(sizeof(*tx_beacon_cmd
), GFP_KERNEL
);
156 tx_beacon_cmd
= priv
->beacon_cmd
;
160 frame_size
= priv
->beacon_skb
->len
;
162 /* Set up TX command fields */
163 tx_beacon_cmd
->tx
.len
= cpu_to_le16((u16
)frame_size
);
164 tx_beacon_cmd
->tx
.sta_id
= priv
->beacon_ctx
->bcast_sta_id
;
165 tx_beacon_cmd
->tx
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
166 tx_beacon_cmd
->tx
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
|
167 TX_CMD_FLG_TSF_MSK
| TX_CMD_FLG_STA_RATE_MSK
;
169 /* Set up TX beacon command fields */
170 iwl_set_beacon_tim(priv
, tx_beacon_cmd
, priv
->beacon_skb
->data
,
173 /* Set up packet rate and flags */
174 info
= IEEE80211_SKB_CB(priv
->beacon_skb
);
177 * Let's set up the rate at least somewhat correctly;
178 * it will currently not actually be used by the uCode,
179 * it uses the broadcast station's rate instead.
181 if (info
->control
.rates
[0].idx
< 0 ||
182 info
->control
.rates
[0].flags
& IEEE80211_TX_RC_MCS
)
185 rate
= info
->control
.rates
[0].idx
;
187 priv
->mgmt_tx_ant
= iwl_toggle_tx_ant(priv
, priv
->mgmt_tx_ant
,
188 priv
->hw_params
.valid_tx_ant
);
189 rate_flags
= iwl_ant_idx_to_flags(priv
->mgmt_tx_ant
);
191 /* In mac80211, rates for 5 GHz start at 0 */
192 if (info
->band
== IEEE80211_BAND_5GHZ
)
193 rate
+= IWL_FIRST_OFDM_RATE
;
194 else if (rate
>= IWL_FIRST_CCK_RATE
&& rate
<= IWL_LAST_CCK_RATE
)
195 rate_flags
|= RATE_MCS_CCK_MSK
;
197 tx_beacon_cmd
->tx
.rate_n_flags
=
198 iwl_hw_set_rate_n_flags(rate
, rate_flags
);
201 cmd
.len
[0] = sizeof(*tx_beacon_cmd
);
202 cmd
.data
[0] = tx_beacon_cmd
;
203 cmd
.dataflags
[0] = IWL_HCMD_DFL_NOCOPY
;
204 cmd
.len
[1] = frame_size
;
205 cmd
.data
[1] = priv
->beacon_skb
->data
;
206 cmd
.dataflags
[1] = IWL_HCMD_DFL_NOCOPY
;
208 return iwl_send_cmd_sync(priv
, &cmd
);
211 static void iwl_bg_beacon_update(struct work_struct
*work
)
213 struct iwl_priv
*priv
=
214 container_of(work
, struct iwl_priv
, beacon_update
);
215 struct sk_buff
*beacon
;
217 mutex_lock(&priv
->mutex
);
218 if (!priv
->beacon_ctx
) {
219 IWL_ERR(priv
, "updating beacon w/o beacon context!\n");
223 if (priv
->beacon_ctx
->vif
->type
!= NL80211_IFTYPE_AP
) {
225 * The ucode will send beacon notifications even in
226 * IBSS mode, but we don't want to process them. But
227 * we need to defer the type check to here due to
228 * requiring locking around the beacon_ctx access.
233 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
234 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->beacon_ctx
->vif
);
236 IWL_ERR(priv
, "update beacon failed -- keeping old\n");
240 /* new beacon skb is allocated every time; dispose previous.*/
241 dev_kfree_skb(priv
->beacon_skb
);
243 priv
->beacon_skb
= beacon
;
245 iwlagn_send_beacon_cmd(priv
);
247 mutex_unlock(&priv
->mutex
);
250 static void iwl_bg_bt_runtime_config(struct work_struct
*work
)
252 struct iwl_priv
*priv
=
253 container_of(work
, struct iwl_priv
, bt_runtime_config
);
255 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
258 /* dont send host command if rf-kill is on */
259 if (!iwl_is_ready_rf(priv
))
261 iwlagn_send_advance_bt_config(priv
);
264 static void iwl_bg_bt_full_concurrency(struct work_struct
*work
)
266 struct iwl_priv
*priv
=
267 container_of(work
, struct iwl_priv
, bt_full_concurrency
);
268 struct iwl_rxon_context
*ctx
;
270 mutex_lock(&priv
->mutex
);
272 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
275 /* dont send host command if rf-kill is on */
276 if (!iwl_is_ready_rf(priv
))
279 IWL_DEBUG_INFO(priv
, "BT coex in %s mode\n",
280 priv
->bt_full_concurrent
?
281 "full concurrency" : "3-wire");
284 * LQ & RXON updated cmds must be sent before BT Config cmd
285 * to avoid 3-wire collisions
287 for_each_context(priv
, ctx
) {
288 iwlagn_set_rxon_chain(priv
, ctx
);
289 iwlagn_commit_rxon(priv
, ctx
);
292 iwlagn_send_advance_bt_config(priv
);
294 mutex_unlock(&priv
->mutex
);
298 * iwl_bg_statistics_periodic - Timer callback to queue statistics
300 * This callback is provided in order to send a statistics request.
302 * This timer function is continually reset to execute within
303 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
304 * was received. We need to ensure we receive the statistics in order
305 * to update the temperature used for calibrating the TXPOWER.
307 static void iwl_bg_statistics_periodic(unsigned long data
)
309 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
311 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
314 /* dont send host command if rf-kill is on */
315 if (!iwl_is_ready_rf(priv
))
318 iwl_send_statistics_request(priv
, CMD_ASYNC
, false);
322 static void iwl_print_cont_event_trace(struct iwl_priv
*priv
, u32 base
,
323 u32 start_idx
, u32 num_events
,
327 u32 ptr
; /* SRAM byte address of log data */
328 u32 ev
, time
, data
; /* event log data */
329 unsigned long reg_flags
;
332 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 2 * sizeof(u32
));
334 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 3 * sizeof(u32
));
336 /* Make sure device is powered up for SRAM reads */
337 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
338 if (iwl_grab_nic_access(priv
)) {
339 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
343 /* Set starting address; reads will auto-increment */
344 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
348 * "time" is actually "data" for mode 0 (no timestamp).
349 * place event id # at far right for easier visual parsing.
351 for (i
= 0; i
< num_events
; i
++) {
352 ev
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
353 time
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
355 trace_iwlwifi_dev_ucode_cont_event(priv
,
358 data
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
359 trace_iwlwifi_dev_ucode_cont_event(priv
,
363 /* Allow device to power down */
364 iwl_release_nic_access(priv
);
365 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
368 static void iwl_continuous_event_trace(struct iwl_priv
*priv
)
370 u32 capacity
; /* event log capacity in # entries */
371 u32 base
; /* SRAM byte address of event log header */
372 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
373 u32 num_wraps
; /* # times uCode wrapped to top of log */
374 u32 next_entry
; /* index of next entry to be written by uCode */
376 base
= priv
->device_pointers
.error_event_table
;
377 if (priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
378 capacity
= iwl_read_targ_mem(priv
, base
);
379 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
380 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
381 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
385 if (num_wraps
== priv
->event_log
.num_wraps
) {
386 iwl_print_cont_event_trace(priv
,
387 base
, priv
->event_log
.next_entry
,
388 next_entry
- priv
->event_log
.next_entry
,
390 priv
->event_log
.non_wraps_count
++;
392 if ((num_wraps
- priv
->event_log
.num_wraps
) > 1)
393 priv
->event_log
.wraps_more_count
++;
395 priv
->event_log
.wraps_once_count
++;
396 trace_iwlwifi_dev_ucode_wrap_event(priv
,
397 num_wraps
- priv
->event_log
.num_wraps
,
398 next_entry
, priv
->event_log
.next_entry
);
399 if (next_entry
< priv
->event_log
.next_entry
) {
400 iwl_print_cont_event_trace(priv
, base
,
401 priv
->event_log
.next_entry
,
402 capacity
- priv
->event_log
.next_entry
,
405 iwl_print_cont_event_trace(priv
, base
, 0,
408 iwl_print_cont_event_trace(priv
, base
,
409 next_entry
, capacity
- next_entry
,
412 iwl_print_cont_event_trace(priv
, base
, 0,
416 priv
->event_log
.num_wraps
= num_wraps
;
417 priv
->event_log
.next_entry
= next_entry
;
421 * iwl_bg_ucode_trace - Timer callback to log ucode event
423 * The timer is continually set to execute every
424 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
425 * this function is to perform continuous uCode event logging operation
428 static void iwl_bg_ucode_trace(unsigned long data
)
430 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
432 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
435 if (priv
->event_log
.ucode_trace
) {
436 iwl_continuous_event_trace(priv
);
437 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
438 mod_timer(&priv
->ucode_trace
,
439 jiffies
+ msecs_to_jiffies(UCODE_TRACE_PERIOD
));
443 static void iwl_bg_tx_flush(struct work_struct
*work
)
445 struct iwl_priv
*priv
=
446 container_of(work
, struct iwl_priv
, tx_flush
);
448 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
451 /* do nothing if rf-kill is on */
452 if (!iwl_is_ready_rf(priv
))
455 IWL_DEBUG_INFO(priv
, "device request: flush all tx frames\n");
456 iwlagn_dev_txfifo_flush(priv
, IWL_DROP_ALL
);
460 * iwl_rx_handle - Main entry function for receiving responses from uCode
462 * Uses the priv->rx_handlers callback function array to invoke
463 * the appropriate handlers, including command responses,
464 * frame-received notifications, and other notifications.
466 static void iwl_rx_handle(struct iwl_priv
*priv
)
468 struct iwl_rx_mem_buffer
*rxb
;
469 struct iwl_rx_packet
*pkt
;
470 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
478 /* uCode's read index (stored in shared DRAM) indicates the last Rx
479 * buffer that the driver may process (last buffer filled by ucode). */
480 r
= le16_to_cpu(rxq
->rb_stts
->closed_rb_num
) & 0x0FFF;
483 /* Rx interrupt, but nothing sent from uCode */
485 IWL_DEBUG_RX(priv
, "r = %d, i = %d\n", r
, i
);
487 /* calculate total frames need to be restock after handling RX */
488 total_empty
= r
- rxq
->write_actual
;
490 total_empty
+= RX_QUEUE_SIZE
;
492 if (total_empty
> (RX_QUEUE_SIZE
/ 2))
500 /* If an RXB doesn't have a Rx queue slot associated with it,
501 * then a bug has been introduced in the queue refilling
502 * routines -- catch it here */
503 if (WARN_ON(rxb
== NULL
)) {
504 i
= (i
+ 1) & RX_QUEUE_MASK
;
508 rxq
->queue
[i
] = NULL
;
510 dma_unmap_page(priv
->bus
.dev
, rxb
->page_dma
,
511 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
515 len
= le32_to_cpu(pkt
->len_n_flags
) & FH_RSCSR_FRAME_SIZE_MSK
;
516 len
+= sizeof(u32
); /* account for status word */
517 trace_iwlwifi_dev_rx(priv
, pkt
, len
);
519 /* Reclaim a command buffer only if this packet is a response
520 * to a (driver-originated) command.
521 * If the packet (e.g. Rx frame) originated from uCode,
522 * there is no command buffer to reclaim.
523 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
524 * but apparently a few don't get set; catch them here. */
525 reclaim
= !(pkt
->hdr
.sequence
& SEQ_RX_FRAME
) &&
526 (pkt
->hdr
.cmd
!= REPLY_RX_PHY_CMD
) &&
527 (pkt
->hdr
.cmd
!= REPLY_RX
) &&
528 (pkt
->hdr
.cmd
!= REPLY_RX_MPDU_CMD
) &&
529 (pkt
->hdr
.cmd
!= REPLY_COMPRESSED_BA
) &&
530 (pkt
->hdr
.cmd
!= STATISTICS_NOTIFICATION
) &&
531 (pkt
->hdr
.cmd
!= REPLY_TX
);
534 * Do the notification wait before RX handlers so
535 * even if the RX handler consumes the RXB we have
536 * access to it in the notification wait entry.
538 if (!list_empty(&priv
->_agn
.notif_waits
)) {
539 struct iwl_notification_wait
*w
;
541 spin_lock(&priv
->_agn
.notif_wait_lock
);
542 list_for_each_entry(w
, &priv
->_agn
.notif_waits
, list
) {
543 if (w
->cmd
== pkt
->hdr
.cmd
) {
546 w
->fn(priv
, pkt
, w
->fn_data
);
549 spin_unlock(&priv
->_agn
.notif_wait_lock
);
551 wake_up_all(&priv
->_agn
.notif_waitq
);
553 if (priv
->pre_rx_handler
)
554 priv
->pre_rx_handler(priv
, rxb
);
556 /* Based on type of command response or notification,
557 * handle those that need handling via function in
558 * rx_handlers table. See iwl_setup_rx_handlers() */
559 if (priv
->rx_handlers
[pkt
->hdr
.cmd
]) {
560 IWL_DEBUG_RX(priv
, "r = %d, i = %d, %s, 0x%02x\n", r
,
561 i
, get_cmd_string(pkt
->hdr
.cmd
), pkt
->hdr
.cmd
);
562 priv
->isr_stats
.rx_handlers
[pkt
->hdr
.cmd
]++;
563 priv
->rx_handlers
[pkt
->hdr
.cmd
] (priv
, rxb
);
565 /* No handling needed */
567 "r %d i %d No handler needed for %s, 0x%02x\n",
568 r
, i
, get_cmd_string(pkt
->hdr
.cmd
),
573 * XXX: After here, we should always check rxb->page
574 * against NULL before touching it or its virtual
575 * memory (pkt). Because some rx_handler might have
576 * already taken or freed the pages.
580 /* Invoke any callbacks, transfer the buffer to caller,
581 * and fire off the (possibly) blocking iwl_send_cmd()
582 * as we reclaim the driver command queue */
584 iwl_tx_cmd_complete(priv
, rxb
);
586 IWL_WARN(priv
, "Claim null rxb?\n");
589 /* Reuse the page if possible. For notification packets and
590 * SKBs that fail to Rx correctly, add them back into the
591 * rx_free list for reuse later. */
592 spin_lock_irqsave(&rxq
->lock
, flags
);
593 if (rxb
->page
!= NULL
) {
594 rxb
->page_dma
= dma_map_page(priv
->bus
.dev
, rxb
->page
,
595 0, PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
597 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
600 list_add_tail(&rxb
->list
, &rxq
->rx_used
);
602 spin_unlock_irqrestore(&rxq
->lock
, flags
);
604 i
= (i
+ 1) & RX_QUEUE_MASK
;
605 /* If there are a lot of unused frames,
606 * restock the Rx queue so ucode wont assert. */
611 iwlagn_rx_replenish_now(priv
);
617 /* Backtrack one entry */
620 iwlagn_rx_replenish_now(priv
);
622 iwlagn_rx_queue_restock(priv
);
625 /* tasklet for iwlagn interrupt */
626 static void iwl_irq_tasklet(struct iwl_priv
*priv
)
632 #ifdef CONFIG_IWLWIFI_DEBUG
636 spin_lock_irqsave(&priv
->lock
, flags
);
638 /* Ack/clear/reset pending uCode interrupts.
639 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
641 /* There is a hardware bug in the interrupt mask function that some
642 * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
643 * they are disabled in the CSR_INT_MASK register. Furthermore the
644 * ICT interrupt handling mechanism has another bug that might cause
645 * these unmasked interrupts fail to be detected. We workaround the
646 * hardware bugs here by ACKing all the possible interrupts so that
647 * interrupt coalescing can still be achieved.
649 iwl_write32(priv
, CSR_INT
, priv
->_agn
.inta
| ~priv
->inta_mask
);
651 inta
= priv
->_agn
.inta
;
653 #ifdef CONFIG_IWLWIFI_DEBUG
654 if (iwl_get_debug_level(priv
) & IWL_DL_ISR
) {
656 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
657 IWL_DEBUG_ISR(priv
, "inta 0x%08x, enabled 0x%08x\n ",
662 spin_unlock_irqrestore(&priv
->lock
, flags
);
664 /* saved interrupt in inta variable now we can reset priv->_agn.inta */
667 /* Now service all interrupt bits discovered above. */
668 if (inta
& CSR_INT_BIT_HW_ERR
) {
669 IWL_ERR(priv
, "Hardware error detected. Restarting.\n");
671 /* Tell the device to stop sending interrupts */
672 iwl_disable_interrupts(priv
);
674 priv
->isr_stats
.hw
++;
675 iwl_irq_handle_error(priv
);
677 handled
|= CSR_INT_BIT_HW_ERR
;
682 #ifdef CONFIG_IWLWIFI_DEBUG
683 if (iwl_get_debug_level(priv
) & (IWL_DL_ISR
)) {
684 /* NIC fires this, but we don't use it, redundant with WAKEUP */
685 if (inta
& CSR_INT_BIT_SCD
) {
686 IWL_DEBUG_ISR(priv
, "Scheduler finished to transmit "
687 "the frame/frames.\n");
688 priv
->isr_stats
.sch
++;
691 /* Alive notification via Rx interrupt will do the real work */
692 if (inta
& CSR_INT_BIT_ALIVE
) {
693 IWL_DEBUG_ISR(priv
, "Alive interrupt\n");
694 priv
->isr_stats
.alive
++;
698 /* Safely ignore these bits for debug checks below */
699 inta
&= ~(CSR_INT_BIT_SCD
| CSR_INT_BIT_ALIVE
);
701 /* HW RF KILL switch toggled */
702 if (inta
& CSR_INT_BIT_RF_KILL
) {
704 if (!(iwl_read32(priv
, CSR_GP_CNTRL
) &
705 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
))
708 IWL_WARN(priv
, "RF_KILL bit toggled to %s.\n",
709 hw_rf_kill
? "disable radio" : "enable radio");
711 priv
->isr_stats
.rfkill
++;
713 /* driver only loads ucode once setting the interface up.
714 * the driver allows loading the ucode even if the radio
715 * is killed. Hence update the killswitch state here. The
716 * rfkill handler will care about restarting if needed.
718 if (!test_bit(STATUS_ALIVE
, &priv
->status
)) {
720 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
722 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
723 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
, hw_rf_kill
);
726 handled
|= CSR_INT_BIT_RF_KILL
;
729 /* Chip got too hot and stopped itself */
730 if (inta
& CSR_INT_BIT_CT_KILL
) {
731 IWL_ERR(priv
, "Microcode CT kill error detected.\n");
732 priv
->isr_stats
.ctkill
++;
733 handled
|= CSR_INT_BIT_CT_KILL
;
736 /* Error detected by uCode */
737 if (inta
& CSR_INT_BIT_SW_ERR
) {
738 IWL_ERR(priv
, "Microcode SW error detected. "
739 " Restarting 0x%X.\n", inta
);
740 priv
->isr_stats
.sw
++;
741 iwl_irq_handle_error(priv
);
742 handled
|= CSR_INT_BIT_SW_ERR
;
745 /* uCode wakes up after power-down sleep */
746 if (inta
& CSR_INT_BIT_WAKEUP
) {
747 IWL_DEBUG_ISR(priv
, "Wakeup interrupt\n");
748 iwl_rx_queue_update_write_ptr(priv
, &priv
->rxq
);
749 for (i
= 0; i
< priv
->hw_params
.max_txq_num
; i
++)
750 iwl_txq_update_write_ptr(priv
, &priv
->txq
[i
]);
752 priv
->isr_stats
.wakeup
++;
754 handled
|= CSR_INT_BIT_WAKEUP
;
757 /* All uCode command responses, including Tx command responses,
758 * Rx "responses" (frame-received notification), and other
759 * notifications from uCode come through here*/
760 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
|
761 CSR_INT_BIT_RX_PERIODIC
)) {
762 IWL_DEBUG_ISR(priv
, "Rx interrupt\n");
763 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
)) {
764 handled
|= (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
);
765 iwl_write32(priv
, CSR_FH_INT_STATUS
,
768 if (inta
& CSR_INT_BIT_RX_PERIODIC
) {
769 handled
|= CSR_INT_BIT_RX_PERIODIC
;
770 iwl_write32(priv
, CSR_INT
, CSR_INT_BIT_RX_PERIODIC
);
772 /* Sending RX interrupt require many steps to be done in the
774 * 1- write interrupt to current index in ICT table.
776 * 3- update RX shared data to indicate last write index.
778 * This could lead to RX race, driver could receive RX interrupt
779 * but the shared data changes does not reflect this;
780 * periodic interrupt will detect any dangling Rx activity.
783 /* Disable periodic interrupt; we use it as just a one-shot. */
784 iwl_write8(priv
, CSR_INT_PERIODIC_REG
,
785 CSR_INT_PERIODIC_DIS
);
789 * Enable periodic interrupt in 8 msec only if we received
790 * real RX interrupt (instead of just periodic int), to catch
791 * any dangling Rx interrupt. If it was just the periodic
792 * interrupt, there was no dangling Rx activity, and no need
793 * to extend the periodic interrupt; one-shot is enough.
795 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
))
796 iwl_write8(priv
, CSR_INT_PERIODIC_REG
,
797 CSR_INT_PERIODIC_ENA
);
799 priv
->isr_stats
.rx
++;
802 /* This "Tx" DMA channel is used only for loading uCode */
803 if (inta
& CSR_INT_BIT_FH_TX
) {
804 iwl_write32(priv
, CSR_FH_INT_STATUS
, CSR_FH_INT_TX_MASK
);
805 IWL_DEBUG_ISR(priv
, "uCode load interrupt\n");
806 priv
->isr_stats
.tx
++;
807 handled
|= CSR_INT_BIT_FH_TX
;
808 /* Wake up uCode load routine, now that load is complete */
809 priv
->ucode_write_complete
= 1;
810 wake_up_interruptible(&priv
->wait_command_queue
);
813 if (inta
& ~handled
) {
814 IWL_ERR(priv
, "Unhandled INTA bits 0x%08x\n", inta
& ~handled
);
815 priv
->isr_stats
.unhandled
++;
818 if (inta
& ~(priv
->inta_mask
)) {
819 IWL_WARN(priv
, "Disabled INTA bits 0x%08x were pending\n",
820 inta
& ~priv
->inta_mask
);
823 /* Re-enable all interrupts */
824 /* only Re-enable if disabled by irq */
825 if (test_bit(STATUS_INT_ENABLED
, &priv
->status
))
826 iwl_enable_interrupts(priv
);
827 /* Re-enable RF_KILL if it occurred */
828 else if (handled
& CSR_INT_BIT_RF_KILL
)
829 iwl_enable_rfkill_int(priv
);
832 /*****************************************************************************
836 *****************************************************************************/
838 #ifdef CONFIG_IWLWIFI_DEBUG
841 * The following adds a new attribute to the sysfs representation
842 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
843 * used for controlling the debug level.
845 * See the level definitions in iwl for details.
847 * The debug_level being managed using sysfs below is a per device debug
848 * level that is used instead of the global debug level if it (the per
849 * device debug level) is set.
851 static ssize_t
show_debug_level(struct device
*d
,
852 struct device_attribute
*attr
, char *buf
)
854 struct iwl_priv
*priv
= dev_get_drvdata(d
);
855 return sprintf(buf
, "0x%08X\n", iwl_get_debug_level(priv
));
857 static ssize_t
store_debug_level(struct device
*d
,
858 struct device_attribute
*attr
,
859 const char *buf
, size_t count
)
861 struct iwl_priv
*priv
= dev_get_drvdata(d
);
865 ret
= strict_strtoul(buf
, 0, &val
);
867 IWL_ERR(priv
, "%s is not in hex or decimal form.\n", buf
);
869 priv
->debug_level
= val
;
870 if (iwl_alloc_traffic_mem(priv
))
872 "Not enough memory to generate traffic log\n");
874 return strnlen(buf
, count
);
877 static DEVICE_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
878 show_debug_level
, store_debug_level
);
881 #endif /* CONFIG_IWLWIFI_DEBUG */
884 static ssize_t
show_temperature(struct device
*d
,
885 struct device_attribute
*attr
, char *buf
)
887 struct iwl_priv
*priv
= dev_get_drvdata(d
);
889 if (!iwl_is_alive(priv
))
892 return sprintf(buf
, "%d\n", priv
->temperature
);
895 static DEVICE_ATTR(temperature
, S_IRUGO
, show_temperature
, NULL
);
897 static ssize_t
show_tx_power(struct device
*d
,
898 struct device_attribute
*attr
, char *buf
)
900 struct iwl_priv
*priv
= dev_get_drvdata(d
);
902 if (!iwl_is_ready_rf(priv
))
903 return sprintf(buf
, "off\n");
905 return sprintf(buf
, "%d\n", priv
->tx_power_user_lmt
);
908 static ssize_t
store_tx_power(struct device
*d
,
909 struct device_attribute
*attr
,
910 const char *buf
, size_t count
)
912 struct iwl_priv
*priv
= dev_get_drvdata(d
);
916 ret
= strict_strtoul(buf
, 10, &val
);
918 IWL_INFO(priv
, "%s is not in decimal form.\n", buf
);
920 ret
= iwl_set_tx_power(priv
, val
, false);
922 IWL_ERR(priv
, "failed setting tx power (0x%d).\n",
930 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, show_tx_power
, store_tx_power
);
932 static struct attribute
*iwl_sysfs_entries
[] = {
933 &dev_attr_temperature
.attr
,
934 &dev_attr_tx_power
.attr
,
935 #ifdef CONFIG_IWLWIFI_DEBUG
936 &dev_attr_debug_level
.attr
,
941 static struct attribute_group iwl_attribute_group
= {
942 .name
= NULL
, /* put in device directory */
943 .attrs
= iwl_sysfs_entries
,
946 /******************************************************************************
948 * uCode download functions
950 ******************************************************************************/
952 static void iwl_free_fw_desc(struct iwl_priv
*priv
, struct fw_desc
*desc
)
955 dma_free_coherent(priv
->bus
.dev
, desc
->len
,
956 desc
->v_addr
, desc
->p_addr
);
961 static void iwl_free_fw_img(struct iwl_priv
*priv
, struct fw_img
*img
)
963 iwl_free_fw_desc(priv
, &img
->code
);
964 iwl_free_fw_desc(priv
, &img
->data
);
967 static void iwl_dealloc_ucode(struct iwl_priv
*priv
)
969 iwl_free_fw_img(priv
, &priv
->ucode_rt
);
970 iwl_free_fw_img(priv
, &priv
->ucode_init
);
973 static int iwl_alloc_fw_desc(struct iwl_priv
*priv
, struct fw_desc
*desc
,
974 const void *data
, size_t len
)
981 desc
->v_addr
= dma_alloc_coherent(priv
->bus
.dev
, len
,
982 &desc
->p_addr
, GFP_KERNEL
);
987 memcpy(desc
->v_addr
, data
, len
);
991 struct iwlagn_ucode_capabilities
{
992 u32 max_probe_length
;
993 u32 standard_phy_calibration_size
;
997 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
);
998 static int iwl_mac_setup_register(struct iwl_priv
*priv
,
999 struct iwlagn_ucode_capabilities
*capa
);
1001 #define UCODE_EXPERIMENTAL_INDEX 100
1002 #define UCODE_EXPERIMENTAL_TAG "exp"
1004 static int __must_check
iwl_request_firmware(struct iwl_priv
*priv
, bool first
)
1006 const char *name_pre
= priv
->cfg
->fw_name_pre
;
1010 #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
1011 priv
->fw_index
= UCODE_EXPERIMENTAL_INDEX
;
1012 strcpy(tag
, UCODE_EXPERIMENTAL_TAG
);
1013 } else if (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
) {
1015 priv
->fw_index
= priv
->cfg
->ucode_api_max
;
1016 sprintf(tag
, "%d", priv
->fw_index
);
1019 sprintf(tag
, "%d", priv
->fw_index
);
1022 if (priv
->fw_index
< priv
->cfg
->ucode_api_min
) {
1023 IWL_ERR(priv
, "no suitable firmware found!\n");
1027 sprintf(priv
->firmware_name
, "%s%s%s", name_pre
, tag
, ".ucode");
1029 IWL_DEBUG_INFO(priv
, "attempting to load firmware %s'%s'\n",
1030 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
1031 ? "EXPERIMENTAL " : "",
1032 priv
->firmware_name
);
1034 return request_firmware_nowait(THIS_MODULE
, 1, priv
->firmware_name
,
1036 GFP_KERNEL
, priv
, iwl_ucode_callback
);
1039 struct iwlagn_firmware_pieces
{
1040 const void *inst
, *data
, *init
, *init_data
;
1041 size_t inst_size
, data_size
, init_size
, init_data_size
;
1045 u32 init_evtlog_ptr
, init_evtlog_size
, init_errlog_ptr
;
1046 u32 inst_evtlog_ptr
, inst_evtlog_size
, inst_errlog_ptr
;
1049 static int iwlagn_load_legacy_firmware(struct iwl_priv
*priv
,
1050 const struct firmware
*ucode_raw
,
1051 struct iwlagn_firmware_pieces
*pieces
)
1053 struct iwl_ucode_header
*ucode
= (void *)ucode_raw
->data
;
1054 u32 api_ver
, hdr_size
;
1057 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
1058 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
1063 if (ucode_raw
->size
< hdr_size
) {
1064 IWL_ERR(priv
, "File size too small!\n");
1067 pieces
->build
= le32_to_cpu(ucode
->u
.v2
.build
);
1068 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v2
.inst_size
);
1069 pieces
->data_size
= le32_to_cpu(ucode
->u
.v2
.data_size
);
1070 pieces
->init_size
= le32_to_cpu(ucode
->u
.v2
.init_size
);
1071 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v2
.init_data_size
);
1072 src
= ucode
->u
.v2
.data
;
1078 if (ucode_raw
->size
< hdr_size
) {
1079 IWL_ERR(priv
, "File size too small!\n");
1083 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v1
.inst_size
);
1084 pieces
->data_size
= le32_to_cpu(ucode
->u
.v1
.data_size
);
1085 pieces
->init_size
= le32_to_cpu(ucode
->u
.v1
.init_size
);
1086 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v1
.init_data_size
);
1087 src
= ucode
->u
.v1
.data
;
1091 /* Verify size of file vs. image size info in file's header */
1092 if (ucode_raw
->size
!= hdr_size
+ pieces
->inst_size
+
1093 pieces
->data_size
+ pieces
->init_size
+
1094 pieces
->init_data_size
) {
1097 "uCode file size %d does not match expected size\n",
1098 (int)ucode_raw
->size
);
1103 src
+= pieces
->inst_size
;
1105 src
+= pieces
->data_size
;
1107 src
+= pieces
->init_size
;
1108 pieces
->init_data
= src
;
1109 src
+= pieces
->init_data_size
;
1114 static int iwlagn_wanted_ucode_alternative
= 1;
1116 static int iwlagn_load_firmware(struct iwl_priv
*priv
,
1117 const struct firmware
*ucode_raw
,
1118 struct iwlagn_firmware_pieces
*pieces
,
1119 struct iwlagn_ucode_capabilities
*capa
)
1121 struct iwl_tlv_ucode_header
*ucode
= (void *)ucode_raw
->data
;
1122 struct iwl_ucode_tlv
*tlv
;
1123 size_t len
= ucode_raw
->size
;
1125 int wanted_alternative
= iwlagn_wanted_ucode_alternative
, tmp
;
1128 enum iwl_ucode_tlv_type tlv_type
;
1131 if (len
< sizeof(*ucode
)) {
1132 IWL_ERR(priv
, "uCode has invalid length: %zd\n", len
);
1136 if (ucode
->magic
!= cpu_to_le32(IWL_TLV_UCODE_MAGIC
)) {
1137 IWL_ERR(priv
, "invalid uCode magic: 0X%x\n",
1138 le32_to_cpu(ucode
->magic
));
1143 * Check which alternatives are present, and "downgrade"
1144 * when the chosen alternative is not present, warning
1145 * the user when that happens. Some files may not have
1146 * any alternatives, so don't warn in that case.
1148 alternatives
= le64_to_cpu(ucode
->alternatives
);
1149 tmp
= wanted_alternative
;
1150 if (wanted_alternative
> 63)
1151 wanted_alternative
= 63;
1152 while (wanted_alternative
&& !(alternatives
& BIT(wanted_alternative
)))
1153 wanted_alternative
--;
1154 if (wanted_alternative
&& wanted_alternative
!= tmp
)
1156 "uCode alternative %d not available, choosing %d\n",
1157 tmp
, wanted_alternative
);
1159 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
1160 pieces
->build
= le32_to_cpu(ucode
->build
);
1163 len
-= sizeof(*ucode
);
1165 while (len
>= sizeof(*tlv
)) {
1168 len
-= sizeof(*tlv
);
1171 tlv_len
= le32_to_cpu(tlv
->length
);
1172 tlv_type
= le16_to_cpu(tlv
->type
);
1173 tlv_alt
= le16_to_cpu(tlv
->alternative
);
1174 tlv_data
= tlv
->data
;
1176 if (len
< tlv_len
) {
1177 IWL_ERR(priv
, "invalid TLV len: %zd/%u\n",
1181 len
-= ALIGN(tlv_len
, 4);
1182 data
+= sizeof(*tlv
) + ALIGN(tlv_len
, 4);
1185 * Alternative 0 is always valid.
1187 * Skip alternative TLVs that are not selected.
1189 if (tlv_alt
!= 0 && tlv_alt
!= wanted_alternative
)
1193 case IWL_UCODE_TLV_INST
:
1194 pieces
->inst
= tlv_data
;
1195 pieces
->inst_size
= tlv_len
;
1197 case IWL_UCODE_TLV_DATA
:
1198 pieces
->data
= tlv_data
;
1199 pieces
->data_size
= tlv_len
;
1201 case IWL_UCODE_TLV_INIT
:
1202 pieces
->init
= tlv_data
;
1203 pieces
->init_size
= tlv_len
;
1205 case IWL_UCODE_TLV_INIT_DATA
:
1206 pieces
->init_data
= tlv_data
;
1207 pieces
->init_data_size
= tlv_len
;
1209 case IWL_UCODE_TLV_BOOT
:
1210 IWL_ERR(priv
, "Found unexpected BOOT ucode\n");
1212 case IWL_UCODE_TLV_PROBE_MAX_LEN
:
1213 if (tlv_len
!= sizeof(u32
))
1214 goto invalid_tlv_len
;
1215 capa
->max_probe_length
=
1216 le32_to_cpup((__le32
*)tlv_data
);
1218 case IWL_UCODE_TLV_PAN
:
1220 goto invalid_tlv_len
;
1221 capa
->flags
|= IWL_UCODE_TLV_FLAGS_PAN
;
1223 case IWL_UCODE_TLV_FLAGS
:
1224 /* must be at least one u32 */
1225 if (tlv_len
< sizeof(u32
))
1226 goto invalid_tlv_len
;
1227 /* and a proper number of u32s */
1228 if (tlv_len
% sizeof(u32
))
1229 goto invalid_tlv_len
;
1231 * This driver only reads the first u32 as
1232 * right now no more features are defined,
1233 * if that changes then either the driver
1234 * will not work with the new firmware, or
1235 * it'll not take advantage of new features.
1237 capa
->flags
= le32_to_cpup((__le32
*)tlv_data
);
1239 case IWL_UCODE_TLV_INIT_EVTLOG_PTR
:
1240 if (tlv_len
!= sizeof(u32
))
1241 goto invalid_tlv_len
;
1242 pieces
->init_evtlog_ptr
=
1243 le32_to_cpup((__le32
*)tlv_data
);
1245 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE
:
1246 if (tlv_len
!= sizeof(u32
))
1247 goto invalid_tlv_len
;
1248 pieces
->init_evtlog_size
=
1249 le32_to_cpup((__le32
*)tlv_data
);
1251 case IWL_UCODE_TLV_INIT_ERRLOG_PTR
:
1252 if (tlv_len
!= sizeof(u32
))
1253 goto invalid_tlv_len
;
1254 pieces
->init_errlog_ptr
=
1255 le32_to_cpup((__le32
*)tlv_data
);
1257 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR
:
1258 if (tlv_len
!= sizeof(u32
))
1259 goto invalid_tlv_len
;
1260 pieces
->inst_evtlog_ptr
=
1261 le32_to_cpup((__le32
*)tlv_data
);
1263 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE
:
1264 if (tlv_len
!= sizeof(u32
))
1265 goto invalid_tlv_len
;
1266 pieces
->inst_evtlog_size
=
1267 le32_to_cpup((__le32
*)tlv_data
);
1269 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR
:
1270 if (tlv_len
!= sizeof(u32
))
1271 goto invalid_tlv_len
;
1272 pieces
->inst_errlog_ptr
=
1273 le32_to_cpup((__le32
*)tlv_data
);
1275 case IWL_UCODE_TLV_ENHANCE_SENS_TBL
:
1277 goto invalid_tlv_len
;
1278 priv
->enhance_sensitivity_table
= true;
1280 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE
:
1281 if (tlv_len
!= sizeof(u32
))
1282 goto invalid_tlv_len
;
1283 capa
->standard_phy_calibration_size
=
1284 le32_to_cpup((__le32
*)tlv_data
);
1287 IWL_DEBUG_INFO(priv
, "unknown TLV: %d\n", tlv_type
);
1293 IWL_ERR(priv
, "invalid TLV after parsing: %zd\n", len
);
1294 iwl_print_hex_dump(priv
, IWL_DL_FW
, (u8
*)data
, len
);
1301 IWL_ERR(priv
, "TLV %d has invalid size: %u\n", tlv_type
, tlv_len
);
1302 iwl_print_hex_dump(priv
, IWL_DL_FW
, tlv_data
, tlv_len
);
1308 * iwl_ucode_callback - callback when firmware was loaded
1310 * If loaded successfully, copies the firmware into buffers
1311 * for the card to fetch (via DMA).
1313 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
)
1315 struct iwl_priv
*priv
= context
;
1316 struct iwl_ucode_header
*ucode
;
1318 struct iwlagn_firmware_pieces pieces
;
1319 const unsigned int api_max
= priv
->cfg
->ucode_api_max
;
1320 const unsigned int api_min
= priv
->cfg
->ucode_api_min
;
1324 struct iwlagn_ucode_capabilities ucode_capa
= {
1325 .max_probe_length
= 200,
1326 .standard_phy_calibration_size
=
1327 IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE
,
1330 memset(&pieces
, 0, sizeof(pieces
));
1333 if (priv
->fw_index
<= priv
->cfg
->ucode_api_max
)
1335 "request for firmware file '%s' failed.\n",
1336 priv
->firmware_name
);
1340 IWL_DEBUG_INFO(priv
, "Loaded firmware file '%s' (%zd bytes).\n",
1341 priv
->firmware_name
, ucode_raw
->size
);
1343 /* Make sure that we got at least the API version number */
1344 if (ucode_raw
->size
< 4) {
1345 IWL_ERR(priv
, "File size way too small!\n");
1349 /* Data from ucode file: header followed by uCode images */
1350 ucode
= (struct iwl_ucode_header
*)ucode_raw
->data
;
1353 err
= iwlagn_load_legacy_firmware(priv
, ucode_raw
, &pieces
);
1355 err
= iwlagn_load_firmware(priv
, ucode_raw
, &pieces
,
1361 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
1362 build
= pieces
.build
;
1365 * api_ver should match the api version forming part of the
1366 * firmware filename ... but we don't check for that and only rely
1367 * on the API version read from firmware header from here on forward
1369 /* no api version check required for experimental uCode */
1370 if (priv
->fw_index
!= UCODE_EXPERIMENTAL_INDEX
) {
1371 if (api_ver
< api_min
|| api_ver
> api_max
) {
1373 "Driver unable to support your firmware API. "
1374 "Driver supports v%u, firmware is v%u.\n",
1379 if (api_ver
!= api_max
)
1381 "Firmware has old API version. Expected v%u, "
1382 "got v%u. New firmware can be obtained "
1383 "from http://www.intellinuxwireless.org.\n",
1388 sprintf(buildstr
, " build %u%s", build
,
1389 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
1394 IWL_INFO(priv
, "loaded firmware version %u.%u.%u.%u%s\n",
1395 IWL_UCODE_MAJOR(priv
->ucode_ver
),
1396 IWL_UCODE_MINOR(priv
->ucode_ver
),
1397 IWL_UCODE_API(priv
->ucode_ver
),
1398 IWL_UCODE_SERIAL(priv
->ucode_ver
),
1401 snprintf(priv
->hw
->wiphy
->fw_version
,
1402 sizeof(priv
->hw
->wiphy
->fw_version
),
1404 IWL_UCODE_MAJOR(priv
->ucode_ver
),
1405 IWL_UCODE_MINOR(priv
->ucode_ver
),
1406 IWL_UCODE_API(priv
->ucode_ver
),
1407 IWL_UCODE_SERIAL(priv
->ucode_ver
),
1411 * For any of the failures below (before allocating pci memory)
1412 * we will try to load a version with a smaller API -- maybe the
1413 * user just got a corrupted version of the latest API.
1416 IWL_DEBUG_INFO(priv
, "f/w package hdr ucode version raw = 0x%x\n",
1418 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime inst size = %Zd\n",
1420 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime data size = %Zd\n",
1422 IWL_DEBUG_INFO(priv
, "f/w package hdr init inst size = %Zd\n",
1424 IWL_DEBUG_INFO(priv
, "f/w package hdr init data size = %Zd\n",
1425 pieces
.init_data_size
);
1427 /* Verify that uCode images will fit in card's SRAM */
1428 if (pieces
.inst_size
> priv
->hw_params
.max_inst_size
) {
1429 IWL_ERR(priv
, "uCode instr len %Zd too large to fit in\n",
1434 if (pieces
.data_size
> priv
->hw_params
.max_data_size
) {
1435 IWL_ERR(priv
, "uCode data len %Zd too large to fit in\n",
1440 if (pieces
.init_size
> priv
->hw_params
.max_inst_size
) {
1441 IWL_ERR(priv
, "uCode init instr len %Zd too large to fit in\n",
1446 if (pieces
.init_data_size
> priv
->hw_params
.max_data_size
) {
1447 IWL_ERR(priv
, "uCode init data len %Zd too large to fit in\n",
1448 pieces
.init_data_size
);
1452 /* Allocate ucode buffers for card's bus-master loading ... */
1454 /* Runtime instructions and 2 copies of data:
1455 * 1) unmodified from disk
1456 * 2) backup cache for save/restore during power-downs */
1457 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_rt
.code
,
1458 pieces
.inst
, pieces
.inst_size
))
1460 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_rt
.data
,
1461 pieces
.data
, pieces
.data_size
))
1464 /* Initialization instructions and data */
1465 if (pieces
.init_size
&& pieces
.init_data_size
) {
1466 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_init
.code
,
1467 pieces
.init
, pieces
.init_size
))
1469 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_init
.data
,
1470 pieces
.init_data
, pieces
.init_data_size
))
1474 /* Now that we can no longer fail, copy information */
1477 * The (size - 16) / 12 formula is based on the information recorded
1478 * for each event, which is of mode 1 (including timestamp) for all
1479 * new microcodes that include this information.
1481 priv
->_agn
.init_evtlog_ptr
= pieces
.init_evtlog_ptr
;
1482 if (pieces
.init_evtlog_size
)
1483 priv
->_agn
.init_evtlog_size
= (pieces
.init_evtlog_size
- 16)/12;
1485 priv
->_agn
.init_evtlog_size
=
1486 priv
->cfg
->base_params
->max_event_log_size
;
1487 priv
->_agn
.init_errlog_ptr
= pieces
.init_errlog_ptr
;
1488 priv
->_agn
.inst_evtlog_ptr
= pieces
.inst_evtlog_ptr
;
1489 if (pieces
.inst_evtlog_size
)
1490 priv
->_agn
.inst_evtlog_size
= (pieces
.inst_evtlog_size
- 16)/12;
1492 priv
->_agn
.inst_evtlog_size
=
1493 priv
->cfg
->base_params
->max_event_log_size
;
1494 priv
->_agn
.inst_errlog_ptr
= pieces
.inst_errlog_ptr
;
1496 priv
->new_scan_threshold_behaviour
=
1497 !!(ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_NEWSCAN
);
1499 if ((priv
->cfg
->sku
& EEPROM_SKU_CAP_IPAN_ENABLE
) &&
1500 (ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_PAN
)) {
1501 priv
->valid_contexts
|= BIT(IWL_RXON_CTX_PAN
);
1502 priv
->sta_key_max_num
= STA_KEY_MAX_NUM_PAN
;
1504 priv
->sta_key_max_num
= STA_KEY_MAX_NUM
;
1506 if (priv
->valid_contexts
!= BIT(IWL_RXON_CTX_BSS
))
1507 priv
->cmd_queue
= IWL_IPAN_CMD_QUEUE_NUM
;
1509 priv
->cmd_queue
= IWL_DEFAULT_CMD_QUEUE_NUM
;
1512 * figure out the offset of chain noise reset and gain commands
1513 * base on the size of standard phy calibration commands table size
1515 if (ucode_capa
.standard_phy_calibration_size
>
1516 IWL_MAX_PHY_CALIBRATE_TBL_SIZE
)
1517 ucode_capa
.standard_phy_calibration_size
=
1518 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE
;
1520 priv
->_agn
.phy_calib_chain_noise_reset_cmd
=
1521 ucode_capa
.standard_phy_calibration_size
;
1522 priv
->_agn
.phy_calib_chain_noise_gain_cmd
=
1523 ucode_capa
.standard_phy_calibration_size
+ 1;
1525 /**************************************************
1526 * This is still part of probe() in a sense...
1528 * 9. Setup and register with mac80211 and debugfs
1529 **************************************************/
1530 err
= iwl_mac_setup_register(priv
, &ucode_capa
);
1534 err
= iwl_dbgfs_register(priv
, DRV_NAME
);
1536 IWL_ERR(priv
, "failed to create debugfs files. Ignoring error: %d\n", err
);
1538 err
= sysfs_create_group(&(priv
->bus
.dev
->kobj
),
1539 &iwl_attribute_group
);
1541 IWL_ERR(priv
, "failed to create sysfs device attributes\n");
1545 /* We have our copies now, allow OS release its copies */
1546 release_firmware(ucode_raw
);
1547 complete(&priv
->_agn
.firmware_loading_complete
);
1551 /* try next, if any */
1552 if (iwl_request_firmware(priv
, false))
1554 release_firmware(ucode_raw
);
1558 IWL_ERR(priv
, "failed to allocate pci memory\n");
1559 iwl_dealloc_ucode(priv
);
1561 complete(&priv
->_agn
.firmware_loading_complete
);
1562 device_release_driver(priv
->bus
.dev
);
1563 release_firmware(ucode_raw
);
1566 static const char *desc_lookup_text
[] = {
1571 "NMI_INTERRUPT_WDG",
1575 "HW_ERROR_TUNE_LOCK",
1576 "HW_ERROR_TEMPERATURE",
1577 "ILLEGAL_CHAN_FREQ",
1580 "NMI_INTERRUPT_HOST",
1581 "NMI_INTERRUPT_ACTION_PT",
1582 "NMI_INTERRUPT_UNKNOWN",
1583 "UCODE_VERSION_MISMATCH",
1584 "HW_ERROR_ABS_LOCK",
1585 "HW_ERROR_CAL_LOCK_FAIL",
1586 "NMI_INTERRUPT_INST_ACTION_PT",
1587 "NMI_INTERRUPT_DATA_ACTION_PT",
1589 "NMI_INTERRUPT_TRM",
1590 "NMI_INTERRUPT_BREAK_POINT"
1597 static struct { char *name
; u8 num
; } advanced_lookup
[] = {
1598 { "NMI_INTERRUPT_WDG", 0x34 },
1599 { "SYSASSERT", 0x35 },
1600 { "UCODE_VERSION_MISMATCH", 0x37 },
1601 { "BAD_COMMAND", 0x38 },
1602 { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
1603 { "FATAL_ERROR", 0x3D },
1604 { "NMI_TRM_HW_ERR", 0x46 },
1605 { "NMI_INTERRUPT_TRM", 0x4C },
1606 { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
1607 { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
1608 { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
1609 { "NMI_INTERRUPT_HOST", 0x66 },
1610 { "NMI_INTERRUPT_ACTION_PT", 0x7C },
1611 { "NMI_INTERRUPT_UNKNOWN", 0x84 },
1612 { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
1613 { "ADVANCED_SYSASSERT", 0 },
1616 static const char *desc_lookup(u32 num
)
1619 int max
= ARRAY_SIZE(desc_lookup_text
);
1622 return desc_lookup_text
[num
];
1624 max
= ARRAY_SIZE(advanced_lookup
) - 1;
1625 for (i
= 0; i
< max
; i
++) {
1626 if (advanced_lookup
[i
].num
== num
)
1629 return advanced_lookup
[i
].name
;
1632 #define ERROR_START_OFFSET (1 * sizeof(u32))
1633 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1635 void iwl_dump_nic_error_log(struct iwl_priv
*priv
)
1638 struct iwl_error_event_table table
;
1640 base
= priv
->device_pointers
.error_event_table
;
1641 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1643 base
= priv
->_agn
.init_errlog_ptr
;
1646 base
= priv
->_agn
.inst_errlog_ptr
;
1649 if (!priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
1651 "Not valid error log pointer 0x%08X for %s uCode\n",
1653 (priv
->ucode_type
== IWL_UCODE_INIT
)
1658 iwl_read_targ_mem_words(priv
, base
, &table
, sizeof(table
));
1660 if (ERROR_START_OFFSET
<= table
.valid
* ERROR_ELEM_SIZE
) {
1661 IWL_ERR(priv
, "Start IWL Error Log Dump:\n");
1662 IWL_ERR(priv
, "Status: 0x%08lX, count: %d\n",
1663 priv
->status
, table
.valid
);
1666 priv
->isr_stats
.err_code
= table
.error_id
;
1668 trace_iwlwifi_dev_ucode_error(priv
, table
.error_id
, table
.tsf_low
,
1669 table
.data1
, table
.data2
, table
.line
,
1670 table
.blink1
, table
.blink2
, table
.ilink1
,
1671 table
.ilink2
, table
.bcon_time
, table
.gp1
,
1672 table
.gp2
, table
.gp3
, table
.ucode_ver
,
1673 table
.hw_ver
, table
.brd_ver
);
1674 IWL_ERR(priv
, "0x%08X | %-28s\n", table
.error_id
,
1675 desc_lookup(table
.error_id
));
1676 IWL_ERR(priv
, "0x%08X | uPc\n", table
.pc
);
1677 IWL_ERR(priv
, "0x%08X | branchlink1\n", table
.blink1
);
1678 IWL_ERR(priv
, "0x%08X | branchlink2\n", table
.blink2
);
1679 IWL_ERR(priv
, "0x%08X | interruptlink1\n", table
.ilink1
);
1680 IWL_ERR(priv
, "0x%08X | interruptlink2\n", table
.ilink2
);
1681 IWL_ERR(priv
, "0x%08X | data1\n", table
.data1
);
1682 IWL_ERR(priv
, "0x%08X | data2\n", table
.data2
);
1683 IWL_ERR(priv
, "0x%08X | line\n", table
.line
);
1684 IWL_ERR(priv
, "0x%08X | beacon time\n", table
.bcon_time
);
1685 IWL_ERR(priv
, "0x%08X | tsf low\n", table
.tsf_low
);
1686 IWL_ERR(priv
, "0x%08X | tsf hi\n", table
.tsf_hi
);
1687 IWL_ERR(priv
, "0x%08X | time gp1\n", table
.gp1
);
1688 IWL_ERR(priv
, "0x%08X | time gp2\n", table
.gp2
);
1689 IWL_ERR(priv
, "0x%08X | time gp3\n", table
.gp3
);
1690 IWL_ERR(priv
, "0x%08X | uCode version\n", table
.ucode_ver
);
1691 IWL_ERR(priv
, "0x%08X | hw version\n", table
.hw_ver
);
1692 IWL_ERR(priv
, "0x%08X | board version\n", table
.brd_ver
);
1693 IWL_ERR(priv
, "0x%08X | hcmd\n", table
.hcmd
);
1696 #define EVENT_START_OFFSET (4 * sizeof(u32))
1699 * iwl_print_event_log - Dump error event log to syslog
1702 static int iwl_print_event_log(struct iwl_priv
*priv
, u32 start_idx
,
1703 u32 num_events
, u32 mode
,
1704 int pos
, char **buf
, size_t bufsz
)
1707 u32 base
; /* SRAM byte address of event log header */
1708 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
1709 u32 ptr
; /* SRAM byte address of log data */
1710 u32 ev
, time
, data
; /* event log data */
1711 unsigned long reg_flags
;
1713 if (num_events
== 0)
1716 base
= priv
->device_pointers
.log_event_table
;
1717 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1719 base
= priv
->_agn
.init_evtlog_ptr
;
1722 base
= priv
->_agn
.inst_evtlog_ptr
;
1726 event_size
= 2 * sizeof(u32
);
1728 event_size
= 3 * sizeof(u32
);
1730 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
1732 /* Make sure device is powered up for SRAM reads */
1733 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
1734 iwl_grab_nic_access(priv
);
1736 /* Set starting address; reads will auto-increment */
1737 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
1740 /* "time" is actually "data" for mode 0 (no timestamp).
1741 * place event id # at far right for easier visual parsing. */
1742 for (i
= 0; i
< num_events
; i
++) {
1743 ev
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1744 time
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1748 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1749 "EVT_LOG:0x%08x:%04u\n",
1752 trace_iwlwifi_dev_ucode_event(priv
, 0,
1754 IWL_ERR(priv
, "EVT_LOG:0x%08x:%04u\n",
1758 data
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1760 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1761 "EVT_LOGT:%010u:0x%08x:%04u\n",
1764 IWL_ERR(priv
, "EVT_LOGT:%010u:0x%08x:%04u\n",
1766 trace_iwlwifi_dev_ucode_event(priv
, time
,
1772 /* Allow device to power down */
1773 iwl_release_nic_access(priv
);
1774 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
1779 * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1781 static int iwl_print_last_event_logs(struct iwl_priv
*priv
, u32 capacity
,
1782 u32 num_wraps
, u32 next_entry
,
1784 int pos
, char **buf
, size_t bufsz
)
1787 * display the newest DEFAULT_LOG_ENTRIES entries
1788 * i.e the entries just before the next ont that uCode would fill.
1791 if (next_entry
< size
) {
1792 pos
= iwl_print_event_log(priv
,
1793 capacity
- (size
- next_entry
),
1794 size
- next_entry
, mode
,
1796 pos
= iwl_print_event_log(priv
, 0,
1800 pos
= iwl_print_event_log(priv
, next_entry
- size
,
1801 size
, mode
, pos
, buf
, bufsz
);
1803 if (next_entry
< size
) {
1804 pos
= iwl_print_event_log(priv
, 0, next_entry
,
1805 mode
, pos
, buf
, bufsz
);
1807 pos
= iwl_print_event_log(priv
, next_entry
- size
,
1808 size
, mode
, pos
, buf
, bufsz
);
1814 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1816 int iwl_dump_nic_event_log(struct iwl_priv
*priv
, bool full_log
,
1817 char **buf
, bool display
)
1819 u32 base
; /* SRAM byte address of event log header */
1820 u32 capacity
; /* event log capacity in # entries */
1821 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
1822 u32 num_wraps
; /* # times uCode wrapped to top of log */
1823 u32 next_entry
; /* index of next entry to be written by uCode */
1824 u32 size
; /* # entries that we'll print */
1829 base
= priv
->device_pointers
.log_event_table
;
1830 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1831 logsize
= priv
->_agn
.init_evtlog_size
;
1833 base
= priv
->_agn
.init_evtlog_ptr
;
1835 logsize
= priv
->_agn
.inst_evtlog_size
;
1837 base
= priv
->_agn
.inst_evtlog_ptr
;
1840 if (!priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
1842 "Invalid event log pointer 0x%08X for %s uCode\n",
1844 (priv
->ucode_type
== IWL_UCODE_INIT
)
1849 /* event log header */
1850 capacity
= iwl_read_targ_mem(priv
, base
);
1851 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
1852 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
1853 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
1855 if (capacity
> logsize
) {
1856 IWL_ERR(priv
, "Log capacity %d is bogus, limit to %d entries\n",
1861 if (next_entry
> logsize
) {
1862 IWL_ERR(priv
, "Log write index %d is bogus, limit to %d\n",
1863 next_entry
, logsize
);
1864 next_entry
= logsize
;
1867 size
= num_wraps
? capacity
: next_entry
;
1869 /* bail out if nothing in log */
1871 IWL_ERR(priv
, "Start IWL Event Log Dump: nothing in log\n");
1875 /* enable/disable bt channel inhibition */
1876 priv
->bt_ch_announce
= iwlagn_bt_ch_announce
;
1878 #ifdef CONFIG_IWLWIFI_DEBUG
1879 if (!(iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) && !full_log
)
1880 size
= (size
> DEFAULT_DUMP_EVENT_LOG_ENTRIES
)
1881 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES
: size
;
1883 size
= (size
> DEFAULT_DUMP_EVENT_LOG_ENTRIES
)
1884 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES
: size
;
1886 IWL_ERR(priv
, "Start IWL Event Log Dump: display last %u entries\n",
1889 #ifdef CONFIG_IWLWIFI_DEBUG
1892 bufsz
= capacity
* 48;
1895 *buf
= kmalloc(bufsz
, GFP_KERNEL
);
1899 if ((iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) || full_log
) {
1901 * if uCode has wrapped back to top of log,
1902 * start at the oldest entry,
1903 * i.e the next one that uCode would fill.
1906 pos
= iwl_print_event_log(priv
, next_entry
,
1907 capacity
- next_entry
, mode
,
1909 /* (then/else) start at top of log */
1910 pos
= iwl_print_event_log(priv
, 0,
1911 next_entry
, mode
, pos
, buf
, bufsz
);
1913 pos
= iwl_print_last_event_logs(priv
, capacity
, num_wraps
,
1914 next_entry
, size
, mode
,
1917 pos
= iwl_print_last_event_logs(priv
, capacity
, num_wraps
,
1918 next_entry
, size
, mode
,
1924 static void iwl_rf_kill_ct_config(struct iwl_priv
*priv
)
1926 struct iwl_ct_kill_config cmd
;
1927 struct iwl_ct_kill_throttling_config adv_cmd
;
1928 unsigned long flags
;
1931 spin_lock_irqsave(&priv
->lock
, flags
);
1932 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
1933 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT
);
1934 spin_unlock_irqrestore(&priv
->lock
, flags
);
1935 priv
->thermal_throttle
.ct_kill_toggle
= false;
1937 if (priv
->cfg
->base_params
->support_ct_kill_exit
) {
1938 adv_cmd
.critical_temperature_enter
=
1939 cpu_to_le32(priv
->hw_params
.ct_kill_threshold
);
1940 adv_cmd
.critical_temperature_exit
=
1941 cpu_to_le32(priv
->hw_params
.ct_kill_exit_threshold
);
1943 ret
= iwl_send_cmd_pdu(priv
, REPLY_CT_KILL_CONFIG_CMD
,
1944 sizeof(adv_cmd
), &adv_cmd
);
1946 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1948 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1950 "critical temperature enter is %d,"
1952 priv
->hw_params
.ct_kill_threshold
,
1953 priv
->hw_params
.ct_kill_exit_threshold
);
1955 cmd
.critical_temperature_R
=
1956 cpu_to_le32(priv
->hw_params
.ct_kill_threshold
);
1958 ret
= iwl_send_cmd_pdu(priv
, REPLY_CT_KILL_CONFIG_CMD
,
1961 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1963 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1965 "critical temperature is %d\n",
1966 priv
->hw_params
.ct_kill_threshold
);
1970 static int iwlagn_send_calib_cfg_rt(struct iwl_priv
*priv
, u32 cfg
)
1972 struct iwl_calib_cfg_cmd calib_cfg_cmd
;
1973 struct iwl_host_cmd cmd
= {
1974 .id
= CALIBRATION_CFG_CMD
,
1975 .len
= { sizeof(struct iwl_calib_cfg_cmd
), },
1976 .data
= { &calib_cfg_cmd
, },
1979 memset(&calib_cfg_cmd
, 0, sizeof(calib_cfg_cmd
));
1980 calib_cfg_cmd
.ucd_calib_cfg
.once
.is_enable
= IWL_CALIB_INIT_CFG_ALL
;
1981 calib_cfg_cmd
.ucd_calib_cfg
.once
.start
= cpu_to_le32(cfg
);
1983 return iwl_send_cmd(priv
, &cmd
);
1988 * iwl_alive_start - called after REPLY_ALIVE notification received
1989 * from protocol/runtime uCode (initialization uCode's
1990 * Alive gets handled by iwl_init_alive_start()).
1992 int iwl_alive_start(struct iwl_priv
*priv
)
1995 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
1997 iwl_reset_ict(priv
);
1999 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
2001 /* After the ALIVE response, we can send host commands to the uCode */
2002 set_bit(STATUS_ALIVE
, &priv
->status
);
2004 /* Enable watchdog to monitor the driver tx queues */
2005 iwl_setup_watchdog(priv
);
2007 if (iwl_is_rfkill(priv
))
2010 /* download priority table before any calibration request */
2011 if (priv
->cfg
->bt_params
&&
2012 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
2013 /* Configure Bluetooth device coexistence support */
2014 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
2015 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
2016 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
2017 iwlagn_send_advance_bt_config(priv
);
2018 priv
->bt_valid
= IWLAGN_BT_VALID_ENABLE_FLAGS
;
2019 iwlagn_send_prio_tbl(priv
);
2021 /* FIXME: w/a to force change uCode BT state machine */
2022 ret
= iwlagn_send_bt_env(priv
, IWL_BT_COEX_ENV_OPEN
,
2023 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
2026 ret
= iwlagn_send_bt_env(priv
, IWL_BT_COEX_ENV_CLOSE
,
2027 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
2032 * default is 2-wire BT coexexistence support
2034 iwl_send_bt_config(priv
);
2037 if (priv
->hw_params
.calib_rt_cfg
)
2038 iwlagn_send_calib_cfg_rt(priv
, priv
->hw_params
.calib_rt_cfg
);
2040 ieee80211_wake_queues(priv
->hw
);
2042 priv
->active_rate
= IWL_RATES_MASK
;
2044 /* Configure Tx antenna selection based on H/W config */
2045 iwlagn_send_tx_ant_config(priv
, priv
->cfg
->valid_tx_ant
);
2047 if (iwl_is_associated_ctx(ctx
)) {
2048 struct iwl_rxon_cmd
*active_rxon
=
2049 (struct iwl_rxon_cmd
*)&ctx
->active
;
2050 /* apply any changes in staging */
2051 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
2052 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
2054 struct iwl_rxon_context
*tmp
;
2055 /* Initialize our rx_config data */
2056 for_each_context(priv
, tmp
)
2057 iwl_connection_init_rx_config(priv
, tmp
);
2059 iwlagn_set_rxon_chain(priv
, ctx
);
2062 iwl_reset_run_time_calib(priv
);
2064 set_bit(STATUS_READY
, &priv
->status
);
2066 /* Configure the adapter for unassociated operation */
2067 ret
= iwlagn_commit_rxon(priv
, ctx
);
2071 /* At this point, the NIC is initialized and operational */
2072 iwl_rf_kill_ct_config(priv
);
2074 IWL_DEBUG_INFO(priv
, "ALIVE processing complete.\n");
2076 return iwl_power_update_mode(priv
, true);
2079 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
);
2081 static void __iwl_down(struct iwl_priv
*priv
)
2085 IWL_DEBUG_INFO(priv
, DRV_NAME
" is going down\n");
2087 iwl_scan_cancel_timeout(priv
, 200);
2089 exit_pending
= test_and_set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2091 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
2092 * to prevent rearm timer */
2093 del_timer_sync(&priv
->watchdog
);
2095 iwl_clear_ucode_stations(priv
, NULL
);
2096 iwl_dealloc_bcast_stations(priv
);
2097 iwl_clear_driver_stations(priv
);
2099 /* reset BT coex data */
2100 priv
->bt_status
= 0;
2101 if (priv
->cfg
->bt_params
)
2102 priv
->bt_traffic_load
=
2103 priv
->cfg
->bt_params
->bt_init_traffic_load
;
2105 priv
->bt_traffic_load
= 0;
2106 priv
->bt_full_concurrent
= false;
2107 priv
->bt_ci_compliance
= 0;
2109 /* Wipe out the EXIT_PENDING status bit if we are not actually
2110 * exiting the module */
2112 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2114 if (priv
->mac80211_registered
)
2115 ieee80211_stop_queues(priv
->hw
);
2117 /* Clear out all status bits but a few that are stable across reset */
2118 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2120 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2121 STATUS_GEO_CONFIGURED
|
2122 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
2124 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2125 STATUS_EXIT_PENDING
;
2127 iwlagn_stop_device(priv
);
2129 dev_kfree_skb(priv
->beacon_skb
);
2130 priv
->beacon_skb
= NULL
;
2133 static void iwl_down(struct iwl_priv
*priv
)
2135 mutex_lock(&priv
->mutex
);
2137 mutex_unlock(&priv
->mutex
);
2139 iwl_cancel_deferred_work(priv
);
2142 #define HW_READY_TIMEOUT (50)
2144 /* Note: returns poll_bit return value, which is >= 0 if success */
2145 static int iwl_set_hw_ready(struct iwl_priv
*priv
)
2149 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2150 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
);
2152 /* See if we got it */
2153 ret
= iwl_poll_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2154 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
,
2155 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
,
2158 IWL_DEBUG_INFO(priv
, "hardware%s ready\n", ret
< 0 ? " not" : "");
2162 /* Note: returns standard 0/-ERROR code */
2163 int iwl_prepare_card_hw(struct iwl_priv
*priv
)
2167 IWL_DEBUG_INFO(priv
, "iwl_prepare_card_hw enter\n");
2169 ret
= iwl_set_hw_ready(priv
);
2173 /* If HW is not ready, prepare the conditions to check again */
2174 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2175 CSR_HW_IF_CONFIG_REG_PREPARE
);
2177 ret
= iwl_poll_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2178 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE
,
2179 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE
, 150000);
2184 /* HW should be ready by now, check again. */
2185 ret
= iwl_set_hw_ready(priv
);
2191 #define MAX_HW_RESTARTS 5
2193 static int __iwl_up(struct iwl_priv
*priv
)
2195 struct iwl_rxon_context
*ctx
;
2198 lockdep_assert_held(&priv
->mutex
);
2200 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
2201 IWL_WARN(priv
, "Exit pending; will not bring the NIC up\n");
2205 for_each_context(priv
, ctx
) {
2206 ret
= iwlagn_alloc_bcast_station(priv
, ctx
);
2208 iwl_dealloc_bcast_stations(priv
);
2213 ret
= iwlagn_run_init_ucode(priv
);
2215 IWL_ERR(priv
, "Failed to run INIT ucode: %d\n", ret
);
2219 ret
= iwlagn_load_ucode_wait_alive(priv
,
2223 IWL_ERR(priv
, "Failed to start RT ucode: %d\n", ret
);
2227 ret
= iwl_alive_start(priv
);
2233 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2235 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2237 IWL_ERR(priv
, "Unable to initialize device.\n");
2242 /*****************************************************************************
2244 * Workqueue callbacks
2246 *****************************************************************************/
2248 static void iwl_bg_run_time_calib_work(struct work_struct
*work
)
2250 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
2251 run_time_calib_work
);
2253 mutex_lock(&priv
->mutex
);
2255 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
) ||
2256 test_bit(STATUS_SCANNING
, &priv
->status
)) {
2257 mutex_unlock(&priv
->mutex
);
2261 if (priv
->start_calib
) {
2262 iwl_chain_noise_calibration(priv
);
2263 iwl_sensitivity_calibration(priv
);
2266 mutex_unlock(&priv
->mutex
);
2269 static void iwlagn_prepare_restart(struct iwl_priv
*priv
)
2271 struct iwl_rxon_context
*ctx
;
2272 bool bt_full_concurrent
;
2273 u8 bt_ci_compliance
;
2277 lockdep_assert_held(&priv
->mutex
);
2279 for_each_context(priv
, ctx
)
2284 * __iwl_down() will clear the BT status variables,
2285 * which is correct, but when we restart we really
2286 * want to keep them so restore them afterwards.
2288 * The restart process will later pick them up and
2289 * re-configure the hw when we reconfigure the BT
2292 bt_full_concurrent
= priv
->bt_full_concurrent
;
2293 bt_ci_compliance
= priv
->bt_ci_compliance
;
2294 bt_load
= priv
->bt_traffic_load
;
2295 bt_status
= priv
->bt_status
;
2299 priv
->bt_full_concurrent
= bt_full_concurrent
;
2300 priv
->bt_ci_compliance
= bt_ci_compliance
;
2301 priv
->bt_traffic_load
= bt_load
;
2302 priv
->bt_status
= bt_status
;
2305 static void iwl_bg_restart(struct work_struct
*data
)
2307 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
2309 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2312 if (test_and_clear_bit(STATUS_FW_ERROR
, &priv
->status
)) {
2313 mutex_lock(&priv
->mutex
);
2314 iwlagn_prepare_restart(priv
);
2315 mutex_unlock(&priv
->mutex
);
2316 iwl_cancel_deferred_work(priv
);
2317 ieee80211_restart_hw(priv
->hw
);
2323 static void iwl_bg_rx_replenish(struct work_struct
*data
)
2325 struct iwl_priv
*priv
=
2326 container_of(data
, struct iwl_priv
, rx_replenish
);
2328 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2331 mutex_lock(&priv
->mutex
);
2332 iwlagn_rx_replenish(priv
);
2333 mutex_unlock(&priv
->mutex
);
2336 static int iwl_mac_offchannel_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
,
2337 struct ieee80211_channel
*chan
,
2338 enum nl80211_channel_type channel_type
,
2341 struct iwl_priv
*priv
= hw
->priv
;
2344 /* Not supported if we don't have PAN */
2345 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
))) {
2350 /* Not supported on pre-P2P firmware */
2351 if (!(priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
&
2352 BIT(NL80211_IFTYPE_P2P_CLIENT
))) {
2357 mutex_lock(&priv
->mutex
);
2359 if (!priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
) {
2361 * If the PAN context is free, use the normal
2362 * way of doing remain-on-channel offload + TX.
2368 /* TODO: queue up if scanning? */
2369 if (test_bit(STATUS_SCANNING
, &priv
->status
) ||
2370 priv
->_agn
.offchan_tx_skb
) {
2376 * max_scan_ie_len doesn't include the blank SSID or the header,
2377 * so need to add that again here.
2379 if (skb
->len
> hw
->wiphy
->max_scan_ie_len
+ 24 + 2) {
2384 priv
->_agn
.offchan_tx_skb
= skb
;
2385 priv
->_agn
.offchan_tx_timeout
= wait
;
2386 priv
->_agn
.offchan_tx_chan
= chan
;
2388 ret
= iwl_scan_initiate(priv
, priv
->contexts
[IWL_RXON_CTX_PAN
].vif
,
2389 IWL_SCAN_OFFCH_TX
, chan
->band
);
2391 priv
->_agn
.offchan_tx_skb
= NULL
;
2393 mutex_unlock(&priv
->mutex
);
2401 static int iwl_mac_offchannel_tx_cancel_wait(struct ieee80211_hw
*hw
)
2403 struct iwl_priv
*priv
= hw
->priv
;
2406 mutex_lock(&priv
->mutex
);
2408 if (!priv
->_agn
.offchan_tx_skb
) {
2413 priv
->_agn
.offchan_tx_skb
= NULL
;
2415 ret
= iwl_scan_cancel_timeout(priv
, 200);
2419 mutex_unlock(&priv
->mutex
);
2424 /*****************************************************************************
2426 * mac80211 entry point functions
2428 *****************************************************************************/
2430 static const struct ieee80211_iface_limit iwlagn_sta_ap_limits
[] = {
2433 .types
= BIT(NL80211_IFTYPE_STATION
),
2437 .types
= BIT(NL80211_IFTYPE_AP
),
2441 static const struct ieee80211_iface_limit iwlagn_2sta_limits
[] = {
2444 .types
= BIT(NL80211_IFTYPE_STATION
),
2448 static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits
[] = {
2451 .types
= BIT(NL80211_IFTYPE_STATION
),
2455 .types
= BIT(NL80211_IFTYPE_P2P_GO
) |
2456 BIT(NL80211_IFTYPE_AP
),
2460 static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits
[] = {
2463 .types
= BIT(NL80211_IFTYPE_STATION
),
2467 .types
= BIT(NL80211_IFTYPE_P2P_CLIENT
),
2471 static const struct ieee80211_iface_combination
2472 iwlagn_iface_combinations_dualmode
[] = {
2473 { .num_different_channels
= 1,
2474 .max_interfaces
= 2,
2475 .beacon_int_infra_match
= true,
2476 .limits
= iwlagn_sta_ap_limits
,
2477 .n_limits
= ARRAY_SIZE(iwlagn_sta_ap_limits
),
2479 { .num_different_channels
= 1,
2480 .max_interfaces
= 2,
2481 .limits
= iwlagn_2sta_limits
,
2482 .n_limits
= ARRAY_SIZE(iwlagn_2sta_limits
),
2486 static const struct ieee80211_iface_combination
2487 iwlagn_iface_combinations_p2p
[] = {
2488 { .num_different_channels
= 1,
2489 .max_interfaces
= 2,
2490 .beacon_int_infra_match
= true,
2491 .limits
= iwlagn_p2p_sta_go_limits
,
2492 .n_limits
= ARRAY_SIZE(iwlagn_p2p_sta_go_limits
),
2494 { .num_different_channels
= 1,
2495 .max_interfaces
= 2,
2496 .limits
= iwlagn_p2p_2sta_limits
,
2497 .n_limits
= ARRAY_SIZE(iwlagn_p2p_2sta_limits
),
2502 * Not a mac80211 entry point function, but it fits in with all the
2503 * other mac80211 functions grouped here.
2505 static int iwl_mac_setup_register(struct iwl_priv
*priv
,
2506 struct iwlagn_ucode_capabilities
*capa
)
2509 struct ieee80211_hw
*hw
= priv
->hw
;
2510 struct iwl_rxon_context
*ctx
;
2512 hw
->rate_control_algorithm
= "iwl-agn-rs";
2514 /* Tell mac80211 our characteristics */
2515 hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
2516 IEEE80211_HW_AMPDU_AGGREGATION
|
2517 IEEE80211_HW_NEED_DTIM_PERIOD
|
2518 IEEE80211_HW_SPECTRUM_MGMT
|
2519 IEEE80211_HW_REPORTS_TX_ACK_STATUS
;
2521 hw
->max_tx_aggregation_subframes
= LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
2523 hw
->flags
|= IEEE80211_HW_SUPPORTS_PS
|
2524 IEEE80211_HW_SUPPORTS_DYNAMIC_PS
;
2526 if (priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
)
2527 hw
->flags
|= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
|
2528 IEEE80211_HW_SUPPORTS_STATIC_SMPS
;
2530 if (capa
->flags
& IWL_UCODE_TLV_FLAGS_MFP
)
2531 hw
->flags
|= IEEE80211_HW_MFP_CAPABLE
;
2533 hw
->sta_data_size
= sizeof(struct iwl_station_priv
);
2534 hw
->vif_data_size
= sizeof(struct iwl_vif_priv
);
2536 for_each_context(priv
, ctx
) {
2537 hw
->wiphy
->interface_modes
|= ctx
->interface_modes
;
2538 hw
->wiphy
->interface_modes
|= ctx
->exclusive_interface_modes
;
2541 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
2543 if (hw
->wiphy
->interface_modes
& BIT(NL80211_IFTYPE_P2P_CLIENT
)) {
2544 hw
->wiphy
->iface_combinations
= iwlagn_iface_combinations_p2p
;
2545 hw
->wiphy
->n_iface_combinations
=
2546 ARRAY_SIZE(iwlagn_iface_combinations_p2p
);
2547 } else if (hw
->wiphy
->interface_modes
& BIT(NL80211_IFTYPE_AP
)) {
2548 hw
->wiphy
->iface_combinations
= iwlagn_iface_combinations_dualmode
;
2549 hw
->wiphy
->n_iface_combinations
=
2550 ARRAY_SIZE(iwlagn_iface_combinations_dualmode
);
2553 hw
->wiphy
->max_remain_on_channel_duration
= 1000;
2555 hw
->wiphy
->flags
|= WIPHY_FLAG_CUSTOM_REGULATORY
|
2556 WIPHY_FLAG_DISABLE_BEACON_HINTS
|
2557 WIPHY_FLAG_IBSS_RSN
;
2559 if (iwlagn_mod_params
.power_save
)
2560 hw
->wiphy
->flags
|= WIPHY_FLAG_PS_ON_BY_DEFAULT
;
2562 hw
->wiphy
->flags
&= ~WIPHY_FLAG_PS_ON_BY_DEFAULT
;
2564 hw
->wiphy
->max_scan_ssids
= PROBE_OPTION_MAX
;
2565 /* we create the 802.11 header and a zero-length SSID element */
2566 hw
->wiphy
->max_scan_ie_len
= capa
->max_probe_length
- 24 - 2;
2568 /* Default value; 4 EDCA QOS priorities */
2571 hw
->max_listen_interval
= IWL_CONN_MAX_LISTEN_INTERVAL
;
2573 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
2574 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
2575 &priv
->bands
[IEEE80211_BAND_2GHZ
];
2576 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
2577 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
2578 &priv
->bands
[IEEE80211_BAND_5GHZ
];
2580 iwl_leds_init(priv
);
2582 ret
= ieee80211_register_hw(priv
->hw
);
2584 IWL_ERR(priv
, "Failed to register hw (error %d)\n", ret
);
2587 priv
->mac80211_registered
= 1;
2593 static int iwlagn_mac_start(struct ieee80211_hw
*hw
)
2595 struct iwl_priv
*priv
= hw
->priv
;
2598 IWL_DEBUG_MAC80211(priv
, "enter\n");
2600 /* we should be verifying the device is ready to be opened */
2601 mutex_lock(&priv
->mutex
);
2602 ret
= __iwl_up(priv
);
2603 mutex_unlock(&priv
->mutex
);
2607 IWL_DEBUG_INFO(priv
, "Start UP work done.\n");
2609 /* Now we should be done, and the READY bit should be set. */
2610 if (WARN_ON(!test_bit(STATUS_READY
, &priv
->status
)))
2613 iwlagn_led_enable(priv
);
2616 IWL_DEBUG_MAC80211(priv
, "leave\n");
2620 static void iwlagn_mac_stop(struct ieee80211_hw
*hw
)
2622 struct iwl_priv
*priv
= hw
->priv
;
2624 IWL_DEBUG_MAC80211(priv
, "enter\n");
2633 flush_workqueue(priv
->workqueue
);
2635 /* User space software may expect getting rfkill changes
2636 * even if interface is down */
2637 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2638 iwl_enable_rfkill_int(priv
);
2640 IWL_DEBUG_MAC80211(priv
, "leave\n");
2643 static void iwlagn_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
2645 struct iwl_priv
*priv
= hw
->priv
;
2647 IWL_DEBUG_MACDUMP(priv
, "enter\n");
2649 IWL_DEBUG_TX(priv
, "dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
2650 ieee80211_get_tx_rate(hw
, IEEE80211_SKB_CB(skb
))->bitrate
);
2652 if (iwlagn_tx_skb(priv
, skb
))
2653 dev_kfree_skb_any(skb
);
2655 IWL_DEBUG_MACDUMP(priv
, "leave\n");
2658 static void iwlagn_mac_update_tkip_key(struct ieee80211_hw
*hw
,
2659 struct ieee80211_vif
*vif
,
2660 struct ieee80211_key_conf
*keyconf
,
2661 struct ieee80211_sta
*sta
,
2662 u32 iv32
, u16
*phase1key
)
2664 struct iwl_priv
*priv
= hw
->priv
;
2665 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2667 IWL_DEBUG_MAC80211(priv
, "enter\n");
2669 iwl_update_tkip_key(priv
, vif_priv
->ctx
, keyconf
, sta
,
2672 IWL_DEBUG_MAC80211(priv
, "leave\n");
2675 static int iwlagn_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
2676 struct ieee80211_vif
*vif
,
2677 struct ieee80211_sta
*sta
,
2678 struct ieee80211_key_conf
*key
)
2680 struct iwl_priv
*priv
= hw
->priv
;
2681 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2682 struct iwl_rxon_context
*ctx
= vif_priv
->ctx
;
2685 bool is_default_wep_key
= false;
2687 IWL_DEBUG_MAC80211(priv
, "enter\n");
2689 if (iwlagn_mod_params
.sw_crypto
) {
2690 IWL_DEBUG_MAC80211(priv
, "leave - hwcrypto disabled\n");
2695 * To support IBSS RSN, don't program group keys in IBSS, the
2696 * hardware will then not attempt to decrypt the frames.
2698 if (vif
->type
== NL80211_IFTYPE_ADHOC
&&
2699 !(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
))
2702 sta_id
= iwl_sta_id_or_broadcast(priv
, vif_priv
->ctx
, sta
);
2703 if (sta_id
== IWL_INVALID_STATION
)
2706 mutex_lock(&priv
->mutex
);
2707 iwl_scan_cancel_timeout(priv
, 100);
2710 * If we are getting WEP group key and we didn't receive any key mapping
2711 * so far, we are in legacy wep mode (group key only), otherwise we are
2713 * In legacy wep mode, we use another host command to the uCode.
2715 if ((key
->cipher
== WLAN_CIPHER_SUITE_WEP40
||
2716 key
->cipher
== WLAN_CIPHER_SUITE_WEP104
) &&
2719 is_default_wep_key
= !ctx
->key_mapping_keys
;
2721 is_default_wep_key
=
2722 (key
->hw_key_idx
== HW_KEY_DEFAULT
);
2727 if (is_default_wep_key
)
2728 ret
= iwl_set_default_wep_key(priv
, vif_priv
->ctx
, key
);
2730 ret
= iwl_set_dynamic_key(priv
, vif_priv
->ctx
,
2733 IWL_DEBUG_MAC80211(priv
, "enable hwcrypto key\n");
2736 if (is_default_wep_key
)
2737 ret
= iwl_remove_default_wep_key(priv
, ctx
, key
);
2739 ret
= iwl_remove_dynamic_key(priv
, ctx
, key
, sta_id
);
2741 IWL_DEBUG_MAC80211(priv
, "disable hwcrypto key\n");
2747 mutex_unlock(&priv
->mutex
);
2748 IWL_DEBUG_MAC80211(priv
, "leave\n");
2753 static int iwlagn_mac_ampdu_action(struct ieee80211_hw
*hw
,
2754 struct ieee80211_vif
*vif
,
2755 enum ieee80211_ampdu_mlme_action action
,
2756 struct ieee80211_sta
*sta
, u16 tid
, u16
*ssn
,
2759 struct iwl_priv
*priv
= hw
->priv
;
2761 struct iwl_station_priv
*sta_priv
= (void *) sta
->drv_priv
;
2763 IWL_DEBUG_HT(priv
, "A-MPDU action on addr %pM tid %d\n",
2766 if (!(priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
))
2769 mutex_lock(&priv
->mutex
);
2772 case IEEE80211_AMPDU_RX_START
:
2773 IWL_DEBUG_HT(priv
, "start Rx\n");
2774 ret
= iwl_sta_rx_agg_start(priv
, sta
, tid
, *ssn
);
2776 case IEEE80211_AMPDU_RX_STOP
:
2777 IWL_DEBUG_HT(priv
, "stop Rx\n");
2778 ret
= iwl_sta_rx_agg_stop(priv
, sta
, tid
);
2779 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2782 case IEEE80211_AMPDU_TX_START
:
2783 IWL_DEBUG_HT(priv
, "start Tx\n");
2784 ret
= iwlagn_tx_agg_start(priv
, vif
, sta
, tid
, ssn
);
2786 priv
->_agn
.agg_tids_count
++;
2787 IWL_DEBUG_HT(priv
, "priv->_agn.agg_tids_count = %u\n",
2788 priv
->_agn
.agg_tids_count
);
2791 case IEEE80211_AMPDU_TX_STOP
:
2792 IWL_DEBUG_HT(priv
, "stop Tx\n");
2793 ret
= iwlagn_tx_agg_stop(priv
, vif
, sta
, tid
);
2794 if ((ret
== 0) && (priv
->_agn
.agg_tids_count
> 0)) {
2795 priv
->_agn
.agg_tids_count
--;
2796 IWL_DEBUG_HT(priv
, "priv->_agn.agg_tids_count = %u\n",
2797 priv
->_agn
.agg_tids_count
);
2799 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2801 if (priv
->cfg
->ht_params
&&
2802 priv
->cfg
->ht_params
->use_rts_for_aggregation
) {
2804 * switch off RTS/CTS if it was previously enabled
2806 sta_priv
->lq_sta
.lq
.general_params
.flags
&=
2807 ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK
;
2808 iwl_send_lq_cmd(priv
, iwl_rxon_ctx_from_vif(vif
),
2809 &sta_priv
->lq_sta
.lq
, CMD_ASYNC
, false);
2812 case IEEE80211_AMPDU_TX_OPERATIONAL
:
2813 buf_size
= min_t(int, buf_size
, LINK_QUAL_AGG_FRAME_LIMIT_DEF
);
2815 iwlagn_txq_agg_queue_setup(priv
, sta
, tid
, buf_size
);
2818 * If the limit is 0, then it wasn't initialised yet,
2819 * use the default. We can do that since we take the
2820 * minimum below, and we don't want to go above our
2821 * default due to hardware restrictions.
2823 if (sta_priv
->max_agg_bufsize
== 0)
2824 sta_priv
->max_agg_bufsize
=
2825 LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
2828 * Even though in theory the peer could have different
2829 * aggregation reorder buffer sizes for different sessions,
2830 * our ucode doesn't allow for that and has a global limit
2831 * for each station. Therefore, use the minimum of all the
2832 * aggregation sessions and our default value.
2834 sta_priv
->max_agg_bufsize
=
2835 min(sta_priv
->max_agg_bufsize
, buf_size
);
2837 if (priv
->cfg
->ht_params
&&
2838 priv
->cfg
->ht_params
->use_rts_for_aggregation
) {
2840 * switch to RTS/CTS if it is the prefer protection
2841 * method for HT traffic
2844 sta_priv
->lq_sta
.lq
.general_params
.flags
|=
2845 LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK
;
2848 sta_priv
->lq_sta
.lq
.agg_params
.agg_frame_cnt_limit
=
2849 sta_priv
->max_agg_bufsize
;
2851 iwl_send_lq_cmd(priv
, iwl_rxon_ctx_from_vif(vif
),
2852 &sta_priv
->lq_sta
.lq
, CMD_ASYNC
, false);
2854 IWL_INFO(priv
, "Tx aggregation enabled on ra = %pM tid = %d\n",
2859 mutex_unlock(&priv
->mutex
);
2864 static int iwlagn_mac_sta_add(struct ieee80211_hw
*hw
,
2865 struct ieee80211_vif
*vif
,
2866 struct ieee80211_sta
*sta
)
2868 struct iwl_priv
*priv
= hw
->priv
;
2869 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
2870 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2871 bool is_ap
= vif
->type
== NL80211_IFTYPE_STATION
;
2875 IWL_DEBUG_INFO(priv
, "received request to add station %pM\n",
2877 mutex_lock(&priv
->mutex
);
2878 IWL_DEBUG_INFO(priv
, "proceeding to add station %pM\n",
2880 sta_priv
->common
.sta_id
= IWL_INVALID_STATION
;
2882 atomic_set(&sta_priv
->pending_frames
, 0);
2883 if (vif
->type
== NL80211_IFTYPE_AP
)
2884 sta_priv
->client
= true;
2886 ret
= iwl_add_station_common(priv
, vif_priv
->ctx
, sta
->addr
,
2887 is_ap
, sta
, &sta_id
);
2889 IWL_ERR(priv
, "Unable to add station %pM (%d)\n",
2891 /* Should we return success if return code is EEXIST ? */
2892 mutex_unlock(&priv
->mutex
);
2896 sta_priv
->common
.sta_id
= sta_id
;
2898 /* Initialize rate scaling */
2899 IWL_DEBUG_INFO(priv
, "Initializing rate scaling for station %pM\n",
2901 iwl_rs_rate_init(priv
, sta
, sta_id
);
2902 mutex_unlock(&priv
->mutex
);
2907 static void iwlagn_mac_channel_switch(struct ieee80211_hw
*hw
,
2908 struct ieee80211_channel_switch
*ch_switch
)
2910 struct iwl_priv
*priv
= hw
->priv
;
2911 const struct iwl_channel_info
*ch_info
;
2912 struct ieee80211_conf
*conf
= &hw
->conf
;
2913 struct ieee80211_channel
*channel
= ch_switch
->channel
;
2914 struct iwl_ht_config
*ht_conf
= &priv
->current_ht_config
;
2917 * When we add support for multiple interfaces, we need to
2918 * revisit this. The channel switch command in the device
2919 * only affects the BSS context, but what does that really
2920 * mean? And what if we get a CSA on the second interface?
2921 * This needs a lot of work.
2923 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2926 IWL_DEBUG_MAC80211(priv
, "enter\n");
2928 mutex_lock(&priv
->mutex
);
2930 if (iwl_is_rfkill(priv
))
2933 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
) ||
2934 test_bit(STATUS_SCANNING
, &priv
->status
) ||
2935 test_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
))
2938 if (!iwl_is_associated_ctx(ctx
))
2941 if (!priv
->cfg
->ops
->lib
->set_channel_switch
)
2944 ch
= channel
->hw_value
;
2945 if (le16_to_cpu(ctx
->active
.channel
) == ch
)
2948 ch_info
= iwl_get_channel_info(priv
, channel
->band
, ch
);
2949 if (!is_channel_valid(ch_info
)) {
2950 IWL_DEBUG_MAC80211(priv
, "invalid channel\n");
2954 spin_lock_irq(&priv
->lock
);
2956 priv
->current_ht_config
.smps
= conf
->smps_mode
;
2958 /* Configure HT40 channels */
2959 ctx
->ht
.enabled
= conf_is_ht(conf
);
2960 if (ctx
->ht
.enabled
) {
2961 if (conf_is_ht40_minus(conf
)) {
2962 ctx
->ht
.extension_chan_offset
=
2963 IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
2964 ctx
->ht
.is_40mhz
= true;
2965 } else if (conf_is_ht40_plus(conf
)) {
2966 ctx
->ht
.extension_chan_offset
=
2967 IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
2968 ctx
->ht
.is_40mhz
= true;
2970 ctx
->ht
.extension_chan_offset
=
2971 IEEE80211_HT_PARAM_CHA_SEC_NONE
;
2972 ctx
->ht
.is_40mhz
= false;
2975 ctx
->ht
.is_40mhz
= false;
2977 if ((le16_to_cpu(ctx
->staging
.channel
) != ch
))
2978 ctx
->staging
.flags
= 0;
2980 iwl_set_rxon_channel(priv
, channel
, ctx
);
2981 iwl_set_rxon_ht(priv
, ht_conf
);
2982 iwl_set_flags_for_band(priv
, ctx
, channel
->band
, ctx
->vif
);
2984 spin_unlock_irq(&priv
->lock
);
2988 * at this point, staging_rxon has the
2989 * configuration for channel switch
2991 set_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
);
2992 priv
->switch_channel
= cpu_to_le16(ch
);
2993 if (priv
->cfg
->ops
->lib
->set_channel_switch(priv
, ch_switch
)) {
2994 clear_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
);
2995 priv
->switch_channel
= 0;
2996 ieee80211_chswitch_done(ctx
->vif
, false);
3000 mutex_unlock(&priv
->mutex
);
3001 IWL_DEBUG_MAC80211(priv
, "leave\n");
3004 static void iwlagn_configure_filter(struct ieee80211_hw
*hw
,
3005 unsigned int changed_flags
,
3006 unsigned int *total_flags
,
3009 struct iwl_priv
*priv
= hw
->priv
;
3010 __le32 filter_or
= 0, filter_nand
= 0;
3011 struct iwl_rxon_context
*ctx
;
3013 #define CHK(test, flag) do { \
3014 if (*total_flags & (test)) \
3015 filter_or |= (flag); \
3017 filter_nand |= (flag); \
3020 IWL_DEBUG_MAC80211(priv
, "Enter: changed: 0x%x, total: 0x%x\n",
3021 changed_flags
, *total_flags
);
3023 CHK(FIF_OTHER_BSS
| FIF_PROMISC_IN_BSS
, RXON_FILTER_PROMISC_MSK
);
3024 /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
3025 CHK(FIF_CONTROL
, RXON_FILTER_CTL2HOST_MSK
| RXON_FILTER_PROMISC_MSK
);
3026 CHK(FIF_BCN_PRBRESP_PROMISC
, RXON_FILTER_BCON_AWARE_MSK
);
3030 mutex_lock(&priv
->mutex
);
3032 for_each_context(priv
, ctx
) {
3033 ctx
->staging
.filter_flags
&= ~filter_nand
;
3034 ctx
->staging
.filter_flags
|= filter_or
;
3037 * Not committing directly because hardware can perform a scan,
3038 * but we'll eventually commit the filter flags change anyway.
3042 mutex_unlock(&priv
->mutex
);
3045 * Receiving all multicast frames is always enabled by the
3046 * default flags setup in iwl_connection_init_rx_config()
3047 * since we currently do not support programming multicast
3048 * filters into the device.
3050 *total_flags
&= FIF_OTHER_BSS
| FIF_ALLMULTI
| FIF_PROMISC_IN_BSS
|
3051 FIF_BCN_PRBRESP_PROMISC
| FIF_CONTROL
;
3054 static void iwlagn_mac_flush(struct ieee80211_hw
*hw
, bool drop
)
3056 struct iwl_priv
*priv
= hw
->priv
;
3058 mutex_lock(&priv
->mutex
);
3059 IWL_DEBUG_MAC80211(priv
, "enter\n");
3061 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
3062 IWL_DEBUG_TX(priv
, "Aborting flush due to device shutdown\n");
3065 if (iwl_is_rfkill(priv
)) {
3066 IWL_DEBUG_TX(priv
, "Aborting flush due to RF Kill\n");
3071 * mac80211 will not push any more frames for transmit
3072 * until the flush is completed
3075 IWL_DEBUG_MAC80211(priv
, "send flush command\n");
3076 if (iwlagn_txfifo_flush(priv
, IWL_DROP_ALL
)) {
3077 IWL_ERR(priv
, "flush request fail\n");
3081 IWL_DEBUG_MAC80211(priv
, "wait transmit/flush all frames\n");
3082 iwlagn_wait_tx_queue_empty(priv
);
3084 mutex_unlock(&priv
->mutex
);
3085 IWL_DEBUG_MAC80211(priv
, "leave\n");
3088 static void iwlagn_disable_roc(struct iwl_priv
*priv
)
3090 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
3091 struct ieee80211_channel
*chan
= ACCESS_ONCE(priv
->hw
->conf
.channel
);
3093 lockdep_assert_held(&priv
->mutex
);
3095 if (!ctx
->is_active
)
3098 ctx
->staging
.dev_type
= RXON_DEV_TYPE_2STA
;
3099 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3100 iwl_set_rxon_channel(priv
, chan
, ctx
);
3101 iwl_set_flags_for_band(priv
, ctx
, chan
->band
, NULL
);
3103 priv
->_agn
.hw_roc_channel
= NULL
;
3105 iwlagn_commit_rxon(priv
, ctx
);
3107 ctx
->is_active
= false;
3110 static void iwlagn_bg_roc_done(struct work_struct
*work
)
3112 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
3113 _agn
.hw_roc_work
.work
);
3115 mutex_lock(&priv
->mutex
);
3116 ieee80211_remain_on_channel_expired(priv
->hw
);
3117 iwlagn_disable_roc(priv
);
3118 mutex_unlock(&priv
->mutex
);
3121 static int iwl_mac_remain_on_channel(struct ieee80211_hw
*hw
,
3122 struct ieee80211_channel
*channel
,
3123 enum nl80211_channel_type channel_type
,
3126 struct iwl_priv
*priv
= hw
->priv
;
3129 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
)))
3132 if (!(priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
&
3133 BIT(NL80211_IFTYPE_P2P_CLIENT
)))
3136 mutex_lock(&priv
->mutex
);
3138 if (priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
||
3139 test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
3144 priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
= true;
3145 priv
->_agn
.hw_roc_channel
= channel
;
3146 priv
->_agn
.hw_roc_chantype
= channel_type
;
3147 priv
->_agn
.hw_roc_duration
= DIV_ROUND_UP(duration
* 1000, 1024);
3148 iwlagn_commit_rxon(priv
, &priv
->contexts
[IWL_RXON_CTX_PAN
]);
3149 queue_delayed_work(priv
->workqueue
, &priv
->_agn
.hw_roc_work
,
3150 msecs_to_jiffies(duration
+ 20));
3152 msleep(IWL_MIN_SLOT_TIME
); /* TU is almost ms */
3153 ieee80211_ready_on_channel(priv
->hw
);
3156 mutex_unlock(&priv
->mutex
);
3161 static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw
*hw
)
3163 struct iwl_priv
*priv
= hw
->priv
;
3165 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
)))
3168 cancel_delayed_work_sync(&priv
->_agn
.hw_roc_work
);
3170 mutex_lock(&priv
->mutex
);
3171 iwlagn_disable_roc(priv
);
3172 mutex_unlock(&priv
->mutex
);
3177 /*****************************************************************************
3179 * driver setup and teardown
3181 *****************************************************************************/
3183 static void iwl_setup_deferred_work(struct iwl_priv
*priv
)
3185 priv
->workqueue
= create_singlethread_workqueue(DRV_NAME
);
3187 init_waitqueue_head(&priv
->wait_command_queue
);
3189 INIT_WORK(&priv
->restart
, iwl_bg_restart
);
3190 INIT_WORK(&priv
->rx_replenish
, iwl_bg_rx_replenish
);
3191 INIT_WORK(&priv
->beacon_update
, iwl_bg_beacon_update
);
3192 INIT_WORK(&priv
->run_time_calib_work
, iwl_bg_run_time_calib_work
);
3193 INIT_WORK(&priv
->tx_flush
, iwl_bg_tx_flush
);
3194 INIT_WORK(&priv
->bt_full_concurrency
, iwl_bg_bt_full_concurrency
);
3195 INIT_WORK(&priv
->bt_runtime_config
, iwl_bg_bt_runtime_config
);
3196 INIT_DELAYED_WORK(&priv
->_agn
.hw_roc_work
, iwlagn_bg_roc_done
);
3198 iwl_setup_scan_deferred_work(priv
);
3200 if (priv
->cfg
->ops
->lib
->setup_deferred_work
)
3201 priv
->cfg
->ops
->lib
->setup_deferred_work(priv
);
3203 init_timer(&priv
->statistics_periodic
);
3204 priv
->statistics_periodic
.data
= (unsigned long)priv
;
3205 priv
->statistics_periodic
.function
= iwl_bg_statistics_periodic
;
3207 init_timer(&priv
->ucode_trace
);
3208 priv
->ucode_trace
.data
= (unsigned long)priv
;
3209 priv
->ucode_trace
.function
= iwl_bg_ucode_trace
;
3211 init_timer(&priv
->watchdog
);
3212 priv
->watchdog
.data
= (unsigned long)priv
;
3213 priv
->watchdog
.function
= iwl_bg_watchdog
;
3215 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
3216 iwl_irq_tasklet
, (unsigned long)priv
);
3219 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
)
3221 if (priv
->cfg
->ops
->lib
->cancel_deferred_work
)
3222 priv
->cfg
->ops
->lib
->cancel_deferred_work(priv
);
3224 cancel_work_sync(&priv
->run_time_calib_work
);
3225 cancel_work_sync(&priv
->beacon_update
);
3227 iwl_cancel_scan_deferred_work(priv
);
3229 cancel_work_sync(&priv
->bt_full_concurrency
);
3230 cancel_work_sync(&priv
->bt_runtime_config
);
3232 del_timer_sync(&priv
->statistics_periodic
);
3233 del_timer_sync(&priv
->ucode_trace
);
3236 static void iwl_init_hw_rates(struct iwl_priv
*priv
,
3237 struct ieee80211_rate
*rates
)
3241 for (i
= 0; i
< IWL_RATE_COUNT_LEGACY
; i
++) {
3242 rates
[i
].bitrate
= iwl_rates
[i
].ieee
* 5;
3243 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
3244 rates
[i
].hw_value_short
= i
;
3246 if ((i
>= IWL_FIRST_CCK_RATE
) && (i
<= IWL_LAST_CCK_RATE
)) {
3248 * If CCK != 1M then set short preamble rate flag.
3251 (iwl_rates
[i
].plcp
== IWL_RATE_1M_PLCP
) ?
3252 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
3257 static int iwl_init_drv(struct iwl_priv
*priv
)
3261 spin_lock_init(&priv
->sta_lock
);
3262 spin_lock_init(&priv
->hcmd_lock
);
3264 mutex_init(&priv
->mutex
);
3266 priv
->ieee_channels
= NULL
;
3267 priv
->ieee_rates
= NULL
;
3268 priv
->band
= IEEE80211_BAND_2GHZ
;
3270 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
3271 priv
->current_ht_config
.smps
= IEEE80211_SMPS_STATIC
;
3272 priv
->missed_beacon_threshold
= IWL_MISSED_BEACON_THRESHOLD_DEF
;
3273 priv
->_agn
.agg_tids_count
= 0;
3275 /* initialize force reset */
3276 priv
->force_reset
[IWL_RF_RESET
].reset_duration
=
3277 IWL_DELAY_NEXT_FORCE_RF_RESET
;
3278 priv
->force_reset
[IWL_FW_RESET
].reset_duration
=
3279 IWL_DELAY_NEXT_FORCE_FW_RELOAD
;
3281 priv
->rx_statistics_jiffies
= jiffies
;
3283 /* Choose which receivers/antennas to use */
3284 iwlagn_set_rxon_chain(priv
, &priv
->contexts
[IWL_RXON_CTX_BSS
]);
3286 iwl_init_scan_params(priv
);
3289 if (priv
->cfg
->bt_params
&&
3290 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
3291 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
3292 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
3293 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
3294 priv
->bt_on_thresh
= BT_ON_THRESHOLD_DEF
;
3295 priv
->bt_duration
= BT_DURATION_LIMIT_DEF
;
3296 priv
->dynamic_frag_thresh
= BT_FRAG_THRESHOLD_DEF
;
3299 ret
= iwl_init_channel_map(priv
);
3301 IWL_ERR(priv
, "initializing regulatory failed: %d\n", ret
);
3305 ret
= iwlcore_init_geos(priv
);
3307 IWL_ERR(priv
, "initializing geos failed: %d\n", ret
);
3308 goto err_free_channel_map
;
3310 iwl_init_hw_rates(priv
, priv
->ieee_rates
);
3314 err_free_channel_map
:
3315 iwl_free_channel_map(priv
);
3320 static void iwl_uninit_drv(struct iwl_priv
*priv
)
3322 iwl_calib_free_results(priv
);
3323 iwlcore_free_geos(priv
);
3324 iwl_free_channel_map(priv
);
3325 kfree(priv
->scan_cmd
);
3326 kfree(priv
->beacon_cmd
);
3329 struct ieee80211_ops iwlagn_hw_ops
= {
3330 .tx
= iwlagn_mac_tx
,
3331 .start
= iwlagn_mac_start
,
3332 .stop
= iwlagn_mac_stop
,
3333 .add_interface
= iwl_mac_add_interface
,
3334 .remove_interface
= iwl_mac_remove_interface
,
3335 .change_interface
= iwl_mac_change_interface
,
3336 .config
= iwlagn_mac_config
,
3337 .configure_filter
= iwlagn_configure_filter
,
3338 .set_key
= iwlagn_mac_set_key
,
3339 .update_tkip_key
= iwlagn_mac_update_tkip_key
,
3340 .conf_tx
= iwl_mac_conf_tx
,
3341 .bss_info_changed
= iwlagn_bss_info_changed
,
3342 .ampdu_action
= iwlagn_mac_ampdu_action
,
3343 .hw_scan
= iwl_mac_hw_scan
,
3344 .sta_notify
= iwlagn_mac_sta_notify
,
3345 .sta_add
= iwlagn_mac_sta_add
,
3346 .sta_remove
= iwl_mac_sta_remove
,
3347 .channel_switch
= iwlagn_mac_channel_switch
,
3348 .flush
= iwlagn_mac_flush
,
3349 .tx_last_beacon
= iwl_mac_tx_last_beacon
,
3350 .remain_on_channel
= iwl_mac_remain_on_channel
,
3351 .cancel_remain_on_channel
= iwl_mac_cancel_remain_on_channel
,
3352 .offchannel_tx
= iwl_mac_offchannel_tx
,
3353 .offchannel_tx_cancel_wait
= iwl_mac_offchannel_tx_cancel_wait
,
3354 CFG80211_TESTMODE_CMD(iwl_testmode_cmd
)
3355 CFG80211_TESTMODE_DUMP(iwl_testmode_dump
)
3358 static u32
iwl_hw_detect(struct iwl_priv
*priv
)
3360 return iwl_read32(priv
, CSR_HW_REV
);
3363 static int iwl_set_hw_params(struct iwl_priv
*priv
)
3365 priv
->hw_params
.max_rxq_size
= RX_QUEUE_SIZE
;
3366 priv
->hw_params
.max_rxq_log
= RX_QUEUE_SIZE_LOG
;
3367 if (iwlagn_mod_params
.amsdu_size_8K
)
3368 priv
->hw_params
.rx_page_order
= get_order(IWL_RX_BUF_SIZE_8K
);
3370 priv
->hw_params
.rx_page_order
= get_order(IWL_RX_BUF_SIZE_4K
);
3372 priv
->hw_params
.max_beacon_itrvl
= IWL_MAX_UCODE_BEACON_INTERVAL
;
3374 if (iwlagn_mod_params
.disable_11n
)
3375 priv
->cfg
->sku
&= ~EEPROM_SKU_CAP_11N_ENABLE
;
3377 /* Device-specific setup */
3378 return priv
->cfg
->ops
->lib
->set_hw_params(priv
);
3381 static const u8 iwlagn_bss_ac_to_fifo
[] = {
3388 static const u8 iwlagn_bss_ac_to_queue
[] = {
3392 static const u8 iwlagn_pan_ac_to_fifo
[] = {
3393 IWL_TX_FIFO_VO_IPAN
,
3394 IWL_TX_FIFO_VI_IPAN
,
3395 IWL_TX_FIFO_BE_IPAN
,
3396 IWL_TX_FIFO_BK_IPAN
,
3399 static const u8 iwlagn_pan_ac_to_queue
[] = {
3403 /* This function both allocates and initializes hw and priv. */
3404 static struct ieee80211_hw
*iwl_alloc_all(struct iwl_cfg
*cfg
)
3406 struct iwl_priv
*priv
;
3407 /* mac80211 allocates memory for this device instance, including
3408 * space for this driver's private structure */
3409 struct ieee80211_hw
*hw
;
3411 hw
= ieee80211_alloc_hw(sizeof(struct iwl_priv
), &iwlagn_hw_ops
);
3413 pr_err("%s: Can not allocate network device\n",
3425 static void iwl_init_context(struct iwl_priv
*priv
)
3430 * The default context is always valid,
3431 * more may be discovered when firmware
3434 priv
->valid_contexts
= BIT(IWL_RXON_CTX_BSS
);
3436 for (i
= 0; i
< NUM_IWL_RXON_CTX
; i
++)
3437 priv
->contexts
[i
].ctxid
= i
;
3439 priv
->contexts
[IWL_RXON_CTX_BSS
].always_active
= true;
3440 priv
->contexts
[IWL_RXON_CTX_BSS
].is_active
= true;
3441 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_cmd
= REPLY_RXON
;
3442 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_timing_cmd
= REPLY_RXON_TIMING
;
3443 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_assoc_cmd
= REPLY_RXON_ASSOC
;
3444 priv
->contexts
[IWL_RXON_CTX_BSS
].qos_cmd
= REPLY_QOS_PARAM
;
3445 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_sta_id
= IWL_AP_ID
;
3446 priv
->contexts
[IWL_RXON_CTX_BSS
].wep_key_cmd
= REPLY_WEPKEY
;
3447 priv
->contexts
[IWL_RXON_CTX_BSS
].ac_to_fifo
= iwlagn_bss_ac_to_fifo
;
3448 priv
->contexts
[IWL_RXON_CTX_BSS
].ac_to_queue
= iwlagn_bss_ac_to_queue
;
3449 priv
->contexts
[IWL_RXON_CTX_BSS
].exclusive_interface_modes
=
3450 BIT(NL80211_IFTYPE_ADHOC
);
3451 priv
->contexts
[IWL_RXON_CTX_BSS
].interface_modes
=
3452 BIT(NL80211_IFTYPE_STATION
);
3453 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_devtype
= RXON_DEV_TYPE_AP
;
3454 priv
->contexts
[IWL_RXON_CTX_BSS
].ibss_devtype
= RXON_DEV_TYPE_IBSS
;
3455 priv
->contexts
[IWL_RXON_CTX_BSS
].station_devtype
= RXON_DEV_TYPE_ESS
;
3456 priv
->contexts
[IWL_RXON_CTX_BSS
].unused_devtype
= RXON_DEV_TYPE_ESS
;
3458 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_cmd
= REPLY_WIPAN_RXON
;
3459 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_timing_cmd
=
3460 REPLY_WIPAN_RXON_TIMING
;
3461 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_assoc_cmd
=
3462 REPLY_WIPAN_RXON_ASSOC
;
3463 priv
->contexts
[IWL_RXON_CTX_PAN
].qos_cmd
= REPLY_WIPAN_QOS_PARAM
;
3464 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_sta_id
= IWL_AP_ID_PAN
;
3465 priv
->contexts
[IWL_RXON_CTX_PAN
].wep_key_cmd
= REPLY_WIPAN_WEPKEY
;
3466 priv
->contexts
[IWL_RXON_CTX_PAN
].bcast_sta_id
= IWLAGN_PAN_BCAST_ID
;
3467 priv
->contexts
[IWL_RXON_CTX_PAN
].station_flags
= STA_FLG_PAN_STATION
;
3468 priv
->contexts
[IWL_RXON_CTX_PAN
].ac_to_fifo
= iwlagn_pan_ac_to_fifo
;
3469 priv
->contexts
[IWL_RXON_CTX_PAN
].ac_to_queue
= iwlagn_pan_ac_to_queue
;
3470 priv
->contexts
[IWL_RXON_CTX_PAN
].mcast_queue
= IWL_IPAN_MCAST_QUEUE
;
3471 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
=
3472 BIT(NL80211_IFTYPE_STATION
) | BIT(NL80211_IFTYPE_AP
);
3473 #ifdef CONFIG_IWL_P2P
3474 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
|=
3475 BIT(NL80211_IFTYPE_P2P_CLIENT
) | BIT(NL80211_IFTYPE_P2P_GO
);
3477 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_devtype
= RXON_DEV_TYPE_CP
;
3478 priv
->contexts
[IWL_RXON_CTX_PAN
].station_devtype
= RXON_DEV_TYPE_2STA
;
3479 priv
->contexts
[IWL_RXON_CTX_PAN
].unused_devtype
= RXON_DEV_TYPE_P2P
;
3481 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
3484 int iwl_probe(void *bus_specific
, struct iwl_bus_ops
*bus_ops
,
3485 struct iwl_cfg
*cfg
)
3488 struct iwl_priv
*priv
;
3489 struct ieee80211_hw
*hw
;
3493 /************************
3494 * 1. Allocating HW data
3495 ************************/
3496 hw
= iwl_alloc_all(cfg
);
3504 priv
->bus
.priv
= priv
;
3505 priv
->bus
.bus_specific
= bus_specific
;
3506 priv
->bus
.ops
= bus_ops
;
3507 priv
->bus
.irq
= priv
->bus
.ops
->get_irq(&priv
->bus
);
3508 priv
->bus
.ops
->set_drv_data(&priv
->bus
, priv
);
3509 priv
->bus
.dev
= priv
->bus
.ops
->get_dev(&priv
->bus
);
3511 iwl_trans_register(&priv
->trans
);
3513 /* At this point both hw and priv are allocated. */
3515 SET_IEEE80211_DEV(hw
, priv
->bus
.dev
);
3517 IWL_DEBUG_INFO(priv
, "*** LOAD DRIVER ***\n");
3519 priv
->inta_mask
= CSR_INI_SET_MASK
;
3521 /* is antenna coupling more than 35dB ? */
3522 priv
->bt_ant_couple_ok
=
3523 (iwlagn_ant_coupling
> IWL_BT_ANTENNA_COUPLING_THRESHOLD
) ?
3526 /* enable/disable bt channel inhibition */
3527 priv
->bt_ch_announce
= iwlagn_bt_ch_announce
;
3528 IWL_DEBUG_INFO(priv
, "BT channel inhibition is %s\n",
3529 (priv
->bt_ch_announce
) ? "On" : "Off");
3531 if (iwl_alloc_traffic_mem(priv
))
3532 IWL_ERR(priv
, "Not enough memory to generate traffic log\n");
3535 /* these spin locks will be used in apm_ops.init and EEPROM access
3536 * we should init now
3538 spin_lock_init(&priv
->reg_lock
);
3539 spin_lock_init(&priv
->lock
);
3542 * stop and reset the on-board processor just in case it is in a
3543 * strange state ... like being left stranded by a primary kernel
3544 * and this is now the kdump kernel trying to start up
3546 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
3548 /***********************
3549 * 3. Read REV register
3550 ***********************/
3551 hw_rev
= iwl_hw_detect(priv
);
3552 IWL_INFO(priv
, "Detected %s, REV=0x%X\n",
3553 priv
->cfg
->name
, hw_rev
);
3555 if (iwl_prepare_card_hw(priv
)) {
3557 IWL_WARN(priv
, "Failed, HW not ready\n");
3558 goto out_free_traffic_mem
;
3564 /* Read the EEPROM */
3565 err
= iwl_eeprom_init(priv
, hw_rev
);
3567 IWL_ERR(priv
, "Unable to init EEPROM\n");
3568 goto out_free_traffic_mem
;
3570 err
= iwl_eeprom_check_version(priv
);
3572 goto out_free_eeprom
;
3574 err
= iwl_eeprom_check_sku(priv
);
3576 goto out_free_eeprom
;
3578 /* extract MAC Address */
3579 iwl_eeprom_get_mac(priv
, priv
->addresses
[0].addr
);
3580 IWL_DEBUG_INFO(priv
, "MAC address: %pM\n", priv
->addresses
[0].addr
);
3581 priv
->hw
->wiphy
->addresses
= priv
->addresses
;
3582 priv
->hw
->wiphy
->n_addresses
= 1;
3583 num_mac
= iwl_eeprom_query16(priv
, EEPROM_NUM_MAC_ADDRESS
);
3585 memcpy(priv
->addresses
[1].addr
, priv
->addresses
[0].addr
,
3587 priv
->addresses
[1].addr
[5]++;
3588 priv
->hw
->wiphy
->n_addresses
++;
3591 /* initialize all valid contexts */
3592 iwl_init_context(priv
);
3594 /************************
3595 * 5. Setup HW constants
3596 ************************/
3597 if (iwl_set_hw_params(priv
)) {
3599 IWL_ERR(priv
, "failed to set hw parameters\n");
3600 goto out_free_eeprom
;
3603 /*******************
3605 *******************/
3607 err
= iwl_init_drv(priv
);
3609 goto out_free_eeprom
;
3610 /* At this point both hw and priv are initialized. */
3612 /********************
3614 ********************/
3615 iwl_alloc_isr_ict(priv
);
3617 err
= request_irq(priv
->bus
.irq
, iwl_isr_ict
, IRQF_SHARED
,
3620 IWL_ERR(priv
, "Error allocating IRQ %d\n", priv
->bus
.irq
);
3621 goto out_uninit_drv
;
3624 iwl_setup_deferred_work(priv
);
3625 iwl_setup_rx_handlers(priv
);
3626 iwl_testmode_init(priv
);
3628 /*********************************************
3629 * 8. Enable interrupts
3630 *********************************************/
3632 iwl_enable_rfkill_int(priv
);
3634 /* If platform's RF_KILL switch is NOT set to KILL */
3635 if (iwl_read32(priv
, CSR_GP_CNTRL
) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
3636 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3638 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3640 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
3641 test_bit(STATUS_RF_KILL_HW
, &priv
->status
));
3643 iwl_power_initialize(priv
);
3644 iwl_tt_initialize(priv
);
3646 init_completion(&priv
->_agn
.firmware_loading_complete
);
3648 err
= iwl_request_firmware(priv
, true);
3650 goto out_destroy_workqueue
;
3654 out_destroy_workqueue
:
3655 destroy_workqueue(priv
->workqueue
);
3656 priv
->workqueue
= NULL
;
3657 free_irq(priv
->bus
.irq
, priv
);
3658 iwl_free_isr_ict(priv
);
3660 iwl_uninit_drv(priv
);
3662 iwl_eeprom_free(priv
);
3663 out_free_traffic_mem
:
3664 iwl_free_traffic_mem(priv
);
3665 ieee80211_free_hw(priv
->hw
);
3670 void __devexit
iwl_remove(struct iwl_priv
* priv
)
3672 unsigned long flags
;
3674 wait_for_completion(&priv
->_agn
.firmware_loading_complete
);
3676 IWL_DEBUG_INFO(priv
, "*** UNLOAD DRIVER ***\n");
3678 iwl_dbgfs_unregister(priv
);
3679 sysfs_remove_group(&priv
->bus
.dev
->kobj
,
3680 &iwl_attribute_group
);
3682 /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3683 * to be called and iwl_down since we are removing the device
3684 * we need to set STATUS_EXIT_PENDING bit.
3686 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
3688 iwl_testmode_cleanup(priv
);
3689 iwl_leds_exit(priv
);
3691 if (priv
->mac80211_registered
) {
3692 ieee80211_unregister_hw(priv
->hw
);
3693 priv
->mac80211_registered
= 0;
3696 /* Reset to low power before unloading driver. */
3701 /* make sure we flush any pending irq or
3702 * tasklet for the driver
3704 spin_lock_irqsave(&priv
->lock
, flags
);
3705 iwl_disable_interrupts(priv
);
3706 spin_unlock_irqrestore(&priv
->lock
, flags
);
3708 iwl_synchronize_irq(priv
);
3710 iwl_dealloc_ucode(priv
);
3712 priv
->trans
.ops
->rx_free(priv
);
3713 priv
->trans
.ops
->tx_free(priv
);
3715 iwl_eeprom_free(priv
);
3718 /*netif_stop_queue(dev); */
3719 flush_workqueue(priv
->workqueue
);
3721 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3722 * priv->workqueue... so we can't take down the workqueue
3724 destroy_workqueue(priv
->workqueue
);
3725 priv
->workqueue
= NULL
;
3726 iwl_free_traffic_mem(priv
);
3728 free_irq(priv
->bus
.irq
, priv
);
3729 priv
->bus
.ops
->set_drv_data(&priv
->bus
, NULL
);
3731 iwl_uninit_drv(priv
);
3733 iwl_free_isr_ict(priv
);
3735 dev_kfree_skb(priv
->beacon_skb
);
3737 ieee80211_free_hw(priv
->hw
);
3741 /*****************************************************************************
3743 * driver and module entry point
3745 *****************************************************************************/
3746 static int __init
iwl_init(void)
3750 pr_info(DRV_DESCRIPTION
", " DRV_VERSION
"\n");
3751 pr_info(DRV_COPYRIGHT
"\n");
3753 ret
= iwlagn_rate_control_register();
3755 pr_err("Unable to register rate control algorithm: %d\n", ret
);
3759 ret
= iwl_pci_register_driver();
3762 goto error_register
;
3766 iwlagn_rate_control_unregister();
3770 static void __exit
iwl_exit(void)
3772 iwl_pci_unregister_driver();
3773 iwlagn_rate_control_unregister();
3776 module_exit(iwl_exit
);
3777 module_init(iwl_init
);
3779 #ifdef CONFIG_IWLWIFI_DEBUG
3780 module_param_named(debug
, iwl_debug_level
, uint
, S_IRUGO
| S_IWUSR
);
3781 MODULE_PARM_DESC(debug
, "debug output mask");
3784 module_param_named(swcrypto
, iwlagn_mod_params
.sw_crypto
, int, S_IRUGO
);
3785 MODULE_PARM_DESC(swcrypto
, "using crypto in software (default 0 [hardware])");
3786 module_param_named(queues_num
, iwlagn_mod_params
.num_of_queues
, int, S_IRUGO
);
3787 MODULE_PARM_DESC(queues_num
, "number of hw queues.");
3788 module_param_named(11n_disable
, iwlagn_mod_params
.disable_11n
, int, S_IRUGO
);
3789 MODULE_PARM_DESC(11n_disable
, "disable 11n functionality");
3790 module_param_named(amsdu_size_8K
, iwlagn_mod_params
.amsdu_size_8K
,
3792 MODULE_PARM_DESC(amsdu_size_8K
, "enable 8K amsdu size");
3793 module_param_named(fw_restart
, iwlagn_mod_params
.restart_fw
, int, S_IRUGO
);
3794 MODULE_PARM_DESC(fw_restart
, "restart firmware in case of error");
3796 module_param_named(ucode_alternative
, iwlagn_wanted_ucode_alternative
, int,
3798 MODULE_PARM_DESC(ucode_alternative
,
3799 "specify ucode alternative to use from ucode file");
3801 module_param_named(antenna_coupling
, iwlagn_ant_coupling
, int, S_IRUGO
);
3802 MODULE_PARM_DESC(antenna_coupling
,
3803 "specify antenna coupling in dB (defualt: 0 dB)");
3805 module_param_named(bt_ch_inhibition
, iwlagn_bt_ch_announce
, bool, S_IRUGO
);
3806 MODULE_PARM_DESC(bt_ch_inhibition
,
3807 "Disable BT channel inhibition (default: enable)");
3809 module_param_named(plcp_check
, iwlagn_mod_params
.plcp_check
, bool, S_IRUGO
);
3810 MODULE_PARM_DESC(plcp_check
, "Check plcp health (default: 1 [enabled])");
3812 module_param_named(ack_check
, iwlagn_mod_params
.ack_check
, bool, S_IRUGO
);
3813 MODULE_PARM_DESC(ack_check
, "Check ack health (default: 0 [disabled])");
3815 module_param_named(wd_disable
, iwlagn_mod_params
.wd_disable
, bool, S_IRUGO
);
3816 MODULE_PARM_DESC(wd_disable
,
3817 "Disable stuck queue watchdog timer (default: 0 [enabled])");
3820 * set bt_coex_active to true, uCode will do kill/defer
3821 * every time the priority line is asserted (BT is sending signals on the
3822 * priority line in the PCIx).
3823 * set bt_coex_active to false, uCode will ignore the BT activity and
3824 * perform the normal operation
3826 * User might experience transmit issue on some platform due to WiFi/BT
3827 * co-exist problem. The possible behaviors are:
3828 * Able to scan and finding all the available AP
3829 * Not able to associate with any AP
3830 * On those platforms, WiFi communication can be restored by set
3831 * "bt_coex_active" module parameter to "false"
3833 * default: bt_coex_active = true (BT_COEX_ENABLE)
3835 module_param_named(bt_coex_active
, iwlagn_mod_params
.bt_coex_active
,
3837 MODULE_PARM_DESC(bt_coex_active
, "enable wifi/bt co-exist (default: enable)");
3839 module_param_named(led_mode
, iwlagn_mod_params
.led_mode
, int, S_IRUGO
);
3840 MODULE_PARM_DESC(led_mode
, "0=system default, "
3841 "1=On(RF On)/Off(RF Off), 2=blinking (default: 0)");
3843 module_param_named(power_save
, iwlagn_mod_params
.power_save
,
3845 MODULE_PARM_DESC(power_save
,
3846 "enable WiFi power management (default: disable)");
3848 module_param_named(power_level
, iwlagn_mod_params
.power_level
,
3850 MODULE_PARM_DESC(power_level
,
3851 "default power save level (range from 1 - 5, default: 1)");
3854 * For now, keep using power level 1 instead of automatically
3857 module_param_named(no_sleep_autoadjust
, iwlagn_mod_params
.no_sleep_autoadjust
,
3859 MODULE_PARM_DESC(no_sleep_autoadjust
,
3860 "don't automatically adjust sleep level "
3861 "according to maximum network latency (default: true)");