Linux v2.6.18-rc4
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / wireless / ipw2100.c
blobe955db435b30b4ef9e2c87106790ada253582fa6
1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 more details.
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
19 file called LICENSE.
21 Contact Information:
22 James P. Ketrenos <ipw2100-admin@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
27 <jt@hpl.hp.com>
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
31 <jkmaline@cc.hut.fi>
32 Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
46 Theory of Operation
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
56 filled.
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
60 done with a packet.
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then referrs to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
72 list (tx_pend_list)
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
77 actual payload data.
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
88 from the kernel.
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
94 ...
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
128 and associated logic
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
152 #include <asm/io.h>
153 #define __KERNEL_SYSCALLS__
154 #include <linux/fs.h>
155 #include <linux/mm.h>
156 #include <linux/slab.h>
157 #include <linux/unistd.h>
158 #include <linux/stringify.h>
159 #include <linux/tcp.h>
160 #include <linux/types.h>
161 #include <linux/version.h>
162 #include <linux/time.h>
163 #include <linux/firmware.h>
164 #include <linux/acpi.h>
165 #include <linux/ctype.h>
167 #include "ipw2100.h"
169 #define IPW2100_VERSION "git-1.2.2"
171 #define DRV_NAME "ipw2100"
172 #define DRV_VERSION IPW2100_VERSION
173 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
174 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
176 /* Debugging stuff */
177 #ifdef CONFIG_IPW2100_DEBUG
178 #define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */
179 #endif
181 MODULE_DESCRIPTION(DRV_DESCRIPTION);
182 MODULE_VERSION(DRV_VERSION);
183 MODULE_AUTHOR(DRV_COPYRIGHT);
184 MODULE_LICENSE("GPL");
186 static int debug = 0;
187 static int mode = 0;
188 static int channel = 0;
189 static int associate = 1;
190 static int disable = 0;
191 #ifdef CONFIG_PM
192 static struct ipw2100_fw ipw2100_firmware;
193 #endif
195 #include <linux/moduleparam.h>
196 module_param(debug, int, 0444);
197 module_param(mode, int, 0444);
198 module_param(channel, int, 0444);
199 module_param(associate, int, 0444);
200 module_param(disable, int, 0444);
202 MODULE_PARM_DESC(debug, "debug level");
203 MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
204 MODULE_PARM_DESC(channel, "channel");
205 MODULE_PARM_DESC(associate, "auto associate when scanning (default on)");
206 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
208 static u32 ipw2100_debug_level = IPW_DL_NONE;
210 #ifdef CONFIG_IPW2100_DEBUG
211 #define IPW_DEBUG(level, message...) \
212 do { \
213 if (ipw2100_debug_level & (level)) { \
214 printk(KERN_DEBUG "ipw2100: %c %s ", \
215 in_interrupt() ? 'I' : 'U', __FUNCTION__); \
216 printk(message); \
218 } while (0)
219 #else
220 #define IPW_DEBUG(level, message...) do {} while (0)
221 #endif /* CONFIG_IPW2100_DEBUG */
223 #ifdef CONFIG_IPW2100_DEBUG
224 static const char *command_types[] = {
225 "undefined",
226 "unused", /* HOST_ATTENTION */
227 "HOST_COMPLETE",
228 "unused", /* SLEEP */
229 "unused", /* HOST_POWER_DOWN */
230 "unused",
231 "SYSTEM_CONFIG",
232 "unused", /* SET_IMR */
233 "SSID",
234 "MANDATORY_BSSID",
235 "AUTHENTICATION_TYPE",
236 "ADAPTER_ADDRESS",
237 "PORT_TYPE",
238 "INTERNATIONAL_MODE",
239 "CHANNEL",
240 "RTS_THRESHOLD",
241 "FRAG_THRESHOLD",
242 "POWER_MODE",
243 "TX_RATES",
244 "BASIC_TX_RATES",
245 "WEP_KEY_INFO",
246 "unused",
247 "unused",
248 "unused",
249 "unused",
250 "WEP_KEY_INDEX",
251 "WEP_FLAGS",
252 "ADD_MULTICAST",
253 "CLEAR_ALL_MULTICAST",
254 "BEACON_INTERVAL",
255 "ATIM_WINDOW",
256 "CLEAR_STATISTICS",
257 "undefined",
258 "undefined",
259 "undefined",
260 "undefined",
261 "TX_POWER_INDEX",
262 "undefined",
263 "undefined",
264 "undefined",
265 "undefined",
266 "undefined",
267 "undefined",
268 "BROADCAST_SCAN",
269 "CARD_DISABLE",
270 "PREFERRED_BSSID",
271 "SET_SCAN_OPTIONS",
272 "SCAN_DWELL_TIME",
273 "SWEEP_TABLE",
274 "AP_OR_STATION_TABLE",
275 "GROUP_ORDINALS",
276 "SHORT_RETRY_LIMIT",
277 "LONG_RETRY_LIMIT",
278 "unused", /* SAVE_CALIBRATION */
279 "unused", /* RESTORE_CALIBRATION */
280 "undefined",
281 "undefined",
282 "undefined",
283 "HOST_PRE_POWER_DOWN",
284 "unused", /* HOST_INTERRUPT_COALESCING */
285 "undefined",
286 "CARD_DISABLE_PHY_OFF",
287 "MSDU_TX_RATES" "undefined",
288 "undefined",
289 "SET_STATION_STAT_BITS",
290 "CLEAR_STATIONS_STAT_BITS",
291 "LEAP_ROGUE_MODE",
292 "SET_SECURITY_INFORMATION",
293 "DISASSOCIATION_BSSID",
294 "SET_WPA_ASS_IE"
296 #endif
298 /* Pre-decl until we get the code solid and then we can clean it up */
299 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
300 static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
301 static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
303 static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
304 static void ipw2100_queues_free(struct ipw2100_priv *priv);
305 static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
307 static int ipw2100_fw_download(struct ipw2100_priv *priv,
308 struct ipw2100_fw *fw);
309 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
310 struct ipw2100_fw *fw);
311 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
312 size_t max);
313 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
314 size_t max);
315 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
316 struct ipw2100_fw *fw);
317 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
318 struct ipw2100_fw *fw);
319 static void ipw2100_wx_event_work(struct ipw2100_priv *priv);
320 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev);
321 static struct iw_handler_def ipw2100_wx_handler_def;
323 static inline void read_register(struct net_device *dev, u32 reg, u32 * val)
325 *val = readl((void __iomem *)(dev->base_addr + reg));
326 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
329 static inline void write_register(struct net_device *dev, u32 reg, u32 val)
331 writel(val, (void __iomem *)(dev->base_addr + reg));
332 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
335 static inline void read_register_word(struct net_device *dev, u32 reg,
336 u16 * val)
338 *val = readw((void __iomem *)(dev->base_addr + reg));
339 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
342 static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val)
344 *val = readb((void __iomem *)(dev->base_addr + reg));
345 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
348 static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
350 writew(val, (void __iomem *)(dev->base_addr + reg));
351 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
354 static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
356 writeb(val, (void __iomem *)(dev->base_addr + reg));
357 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
360 static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val)
362 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
363 addr & IPW_REG_INDIRECT_ADDR_MASK);
364 read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
367 static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
369 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
370 addr & IPW_REG_INDIRECT_ADDR_MASK);
371 write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
374 static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val)
376 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
377 addr & IPW_REG_INDIRECT_ADDR_MASK);
378 read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
381 static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
383 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
384 addr & IPW_REG_INDIRECT_ADDR_MASK);
385 write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
388 static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val)
390 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
391 addr & IPW_REG_INDIRECT_ADDR_MASK);
392 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
395 static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
397 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
398 addr & IPW_REG_INDIRECT_ADDR_MASK);
399 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
402 static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
404 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
405 addr & IPW_REG_INDIRECT_ADDR_MASK);
408 static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
410 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
413 static void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
414 const u8 * buf)
416 u32 aligned_addr;
417 u32 aligned_len;
418 u32 dif_len;
419 u32 i;
421 /* read first nibble byte by byte */
422 aligned_addr = addr & (~0x3);
423 dif_len = addr - aligned_addr;
424 if (dif_len) {
425 /* Start reading at aligned_addr + dif_len */
426 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
427 aligned_addr);
428 for (i = dif_len; i < 4; i++, buf++)
429 write_register_byte(dev,
430 IPW_REG_INDIRECT_ACCESS_DATA + i,
431 *buf);
433 len -= dif_len;
434 aligned_addr += 4;
437 /* read DWs through autoincrement registers */
438 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
439 aligned_len = len & (~0x3);
440 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
441 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf);
443 /* copy the last nibble */
444 dif_len = len - aligned_len;
445 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
446 for (i = 0; i < dif_len; i++, buf++)
447 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
448 *buf);
451 static void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
452 u8 * buf)
454 u32 aligned_addr;
455 u32 aligned_len;
456 u32 dif_len;
457 u32 i;
459 /* read first nibble byte by byte */
460 aligned_addr = addr & (~0x3);
461 dif_len = addr - aligned_addr;
462 if (dif_len) {
463 /* Start reading at aligned_addr + dif_len */
464 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
465 aligned_addr);
466 for (i = dif_len; i < 4; i++, buf++)
467 read_register_byte(dev,
468 IPW_REG_INDIRECT_ACCESS_DATA + i,
469 buf);
471 len -= dif_len;
472 aligned_addr += 4;
475 /* read DWs through autoincrement registers */
476 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
477 aligned_len = len & (~0x3);
478 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
479 read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf);
481 /* copy the last nibble */
482 dif_len = len - aligned_len;
483 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
484 for (i = 0; i < dif_len; i++, buf++)
485 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
488 static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
490 return (dev->base_addr &&
491 (readl
492 ((void __iomem *)(dev->base_addr +
493 IPW_REG_DOA_DEBUG_AREA_START))
494 == IPW_DATA_DOA_DEBUG_VALUE));
497 static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
498 void *val, u32 * len)
500 struct ipw2100_ordinals *ordinals = &priv->ordinals;
501 u32 addr;
502 u32 field_info;
503 u16 field_len;
504 u16 field_count;
505 u32 total_length;
507 if (ordinals->table1_addr == 0) {
508 printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
509 "before they have been loaded.\n");
510 return -EINVAL;
513 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
514 if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
515 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
517 printk(KERN_WARNING DRV_NAME
518 ": ordinal buffer length too small, need %zd\n",
519 IPW_ORD_TAB_1_ENTRY_SIZE);
521 return -EINVAL;
524 read_nic_dword(priv->net_dev,
525 ordinals->table1_addr + (ord << 2), &addr);
526 read_nic_dword(priv->net_dev, addr, val);
528 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
530 return 0;
533 if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
535 ord -= IPW_START_ORD_TAB_2;
537 /* get the address of statistic */
538 read_nic_dword(priv->net_dev,
539 ordinals->table2_addr + (ord << 3), &addr);
541 /* get the second DW of statistics ;
542 * two 16-bit words - first is length, second is count */
543 read_nic_dword(priv->net_dev,
544 ordinals->table2_addr + (ord << 3) + sizeof(u32),
545 &field_info);
547 /* get each entry length */
548 field_len = *((u16 *) & field_info);
550 /* get number of entries */
551 field_count = *(((u16 *) & field_info) + 1);
553 /* abort if no enought memory */
554 total_length = field_len * field_count;
555 if (total_length > *len) {
556 *len = total_length;
557 return -EINVAL;
560 *len = total_length;
561 if (!total_length)
562 return 0;
564 /* read the ordinal data from the SRAM */
565 read_nic_memory(priv->net_dev, addr, total_length, val);
567 return 0;
570 printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
571 "in table 2\n", ord);
573 return -EINVAL;
576 static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val,
577 u32 * len)
579 struct ipw2100_ordinals *ordinals = &priv->ordinals;
580 u32 addr;
582 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
583 if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
584 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
585 IPW_DEBUG_INFO("wrong size\n");
586 return -EINVAL;
589 read_nic_dword(priv->net_dev,
590 ordinals->table1_addr + (ord << 2), &addr);
592 write_nic_dword(priv->net_dev, addr, *val);
594 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
596 return 0;
599 IPW_DEBUG_INFO("wrong table\n");
600 if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
601 return -EINVAL;
603 return -EINVAL;
606 static char *snprint_line(char *buf, size_t count,
607 const u8 * data, u32 len, u32 ofs)
609 int out, i, j, l;
610 char c;
612 out = snprintf(buf, count, "%08X", ofs);
614 for (l = 0, i = 0; i < 2; i++) {
615 out += snprintf(buf + out, count - out, " ");
616 for (j = 0; j < 8 && l < len; j++, l++)
617 out += snprintf(buf + out, count - out, "%02X ",
618 data[(i * 8 + j)]);
619 for (; j < 8; j++)
620 out += snprintf(buf + out, count - out, " ");
623 out += snprintf(buf + out, count - out, " ");
624 for (l = 0, i = 0; i < 2; i++) {
625 out += snprintf(buf + out, count - out, " ");
626 for (j = 0; j < 8 && l < len; j++, l++) {
627 c = data[(i * 8 + j)];
628 if (!isascii(c) || !isprint(c))
629 c = '.';
631 out += snprintf(buf + out, count - out, "%c", c);
634 for (; j < 8; j++)
635 out += snprintf(buf + out, count - out, " ");
638 return buf;
641 static void printk_buf(int level, const u8 * data, u32 len)
643 char line[81];
644 u32 ofs = 0;
645 if (!(ipw2100_debug_level & level))
646 return;
648 while (len) {
649 printk(KERN_DEBUG "%s\n",
650 snprint_line(line, sizeof(line), &data[ofs],
651 min(len, 16U), ofs));
652 ofs += 16;
653 len -= min(len, 16U);
657 #define MAX_RESET_BACKOFF 10
659 static void schedule_reset(struct ipw2100_priv *priv)
661 unsigned long now = get_seconds();
663 /* If we haven't received a reset request within the backoff period,
664 * then we can reset the backoff interval so this reset occurs
665 * immediately */
666 if (priv->reset_backoff &&
667 (now - priv->last_reset > priv->reset_backoff))
668 priv->reset_backoff = 0;
670 priv->last_reset = get_seconds();
672 if (!(priv->status & STATUS_RESET_PENDING)) {
673 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
674 priv->net_dev->name, priv->reset_backoff);
675 netif_carrier_off(priv->net_dev);
676 netif_stop_queue(priv->net_dev);
677 priv->status |= STATUS_RESET_PENDING;
678 if (priv->reset_backoff)
679 queue_delayed_work(priv->workqueue, &priv->reset_work,
680 priv->reset_backoff * HZ);
681 else
682 queue_work(priv->workqueue, &priv->reset_work);
684 if (priv->reset_backoff < MAX_RESET_BACKOFF)
685 priv->reset_backoff++;
687 wake_up_interruptible(&priv->wait_command_queue);
688 } else
689 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
690 priv->net_dev->name);
694 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
695 static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
696 struct host_command *cmd)
698 struct list_head *element;
699 struct ipw2100_tx_packet *packet;
700 unsigned long flags;
701 int err = 0;
703 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
704 command_types[cmd->host_command], cmd->host_command,
705 cmd->host_command_length);
706 printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters,
707 cmd->host_command_length);
709 spin_lock_irqsave(&priv->low_lock, flags);
711 if (priv->fatal_error) {
712 IPW_DEBUG_INFO
713 ("Attempt to send command while hardware in fatal error condition.\n");
714 err = -EIO;
715 goto fail_unlock;
718 if (!(priv->status & STATUS_RUNNING)) {
719 IPW_DEBUG_INFO
720 ("Attempt to send command while hardware is not running.\n");
721 err = -EIO;
722 goto fail_unlock;
725 if (priv->status & STATUS_CMD_ACTIVE) {
726 IPW_DEBUG_INFO
727 ("Attempt to send command while another command is pending.\n");
728 err = -EBUSY;
729 goto fail_unlock;
732 if (list_empty(&priv->msg_free_list)) {
733 IPW_DEBUG_INFO("no available msg buffers\n");
734 goto fail_unlock;
737 priv->status |= STATUS_CMD_ACTIVE;
738 priv->messages_sent++;
740 element = priv->msg_free_list.next;
742 packet = list_entry(element, struct ipw2100_tx_packet, list);
743 packet->jiffy_start = jiffies;
745 /* initialize the firmware command packet */
746 packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
747 packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
748 packet->info.c_struct.cmd->host_command_len_reg =
749 cmd->host_command_length;
750 packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
752 memcpy(packet->info.c_struct.cmd->host_command_params_reg,
753 cmd->host_command_parameters,
754 sizeof(packet->info.c_struct.cmd->host_command_params_reg));
756 list_del(element);
757 DEC_STAT(&priv->msg_free_stat);
759 list_add_tail(element, &priv->msg_pend_list);
760 INC_STAT(&priv->msg_pend_stat);
762 ipw2100_tx_send_commands(priv);
763 ipw2100_tx_send_data(priv);
765 spin_unlock_irqrestore(&priv->low_lock, flags);
768 * We must wait for this command to complete before another
769 * command can be sent... but if we wait more than 3 seconds
770 * then there is a problem.
773 err =
774 wait_event_interruptible_timeout(priv->wait_command_queue,
775 !(priv->
776 status & STATUS_CMD_ACTIVE),
777 HOST_COMPLETE_TIMEOUT);
779 if (err == 0) {
780 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
781 1000 * (HOST_COMPLETE_TIMEOUT / HZ));
782 priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
783 priv->status &= ~STATUS_CMD_ACTIVE;
784 schedule_reset(priv);
785 return -EIO;
788 if (priv->fatal_error) {
789 printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
790 priv->net_dev->name);
791 return -EIO;
794 /* !!!!! HACK TEST !!!!!
795 * When lots of debug trace statements are enabled, the driver
796 * doesn't seem to have as many firmware restart cycles...
798 * As a test, we're sticking in a 1/100s delay here */
799 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
801 return 0;
803 fail_unlock:
804 spin_unlock_irqrestore(&priv->low_lock, flags);
806 return err;
810 * Verify the values and data access of the hardware
811 * No locks needed or used. No functions called.
813 static int ipw2100_verify(struct ipw2100_priv *priv)
815 u32 data1, data2;
816 u32 address;
818 u32 val1 = 0x76543210;
819 u32 val2 = 0xFEDCBA98;
821 /* Domain 0 check - all values should be DOA_DEBUG */
822 for (address = IPW_REG_DOA_DEBUG_AREA_START;
823 address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) {
824 read_register(priv->net_dev, address, &data1);
825 if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
826 return -EIO;
829 /* Domain 1 check - use arbitrary read/write compare */
830 for (address = 0; address < 5; address++) {
831 /* The memory area is not used now */
832 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
833 val1);
834 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
835 val2);
836 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
837 &data1);
838 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
839 &data2);
840 if (val1 == data1 && val2 == data2)
841 return 0;
844 return -EIO;
849 * Loop until the CARD_DISABLED bit is the same value as the
850 * supplied parameter
852 * TODO: See if it would be more efficient to do a wait/wake
853 * cycle and have the completion event trigger the wakeup
856 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
857 static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
859 int i;
860 u32 card_state;
861 u32 len = sizeof(card_state);
862 int err;
864 for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
865 err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
866 &card_state, &len);
867 if (err) {
868 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
869 "failed.\n");
870 return 0;
873 /* We'll break out if either the HW state says it is
874 * in the state we want, or if HOST_COMPLETE command
875 * finishes */
876 if ((card_state == state) ||
877 ((priv->status & STATUS_ENABLED) ?
878 IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
879 if (state == IPW_HW_STATE_ENABLED)
880 priv->status |= STATUS_ENABLED;
881 else
882 priv->status &= ~STATUS_ENABLED;
884 return 0;
887 udelay(50);
890 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
891 state ? "DISABLED" : "ENABLED");
892 return -EIO;
895 /*********************************************************************
896 Procedure : sw_reset_and_clock
897 Purpose : Asserts s/w reset, asserts clock initialization
898 and waits for clock stabilization
899 ********************************************************************/
900 static int sw_reset_and_clock(struct ipw2100_priv *priv)
902 int i;
903 u32 r;
905 // assert s/w reset
906 write_register(priv->net_dev, IPW_REG_RESET_REG,
907 IPW_AUX_HOST_RESET_REG_SW_RESET);
909 // wait for clock stabilization
910 for (i = 0; i < 1000; i++) {
911 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
913 // check clock ready bit
914 read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
915 if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
916 break;
919 if (i == 1000)
920 return -EIO; // TODO: better error value
922 /* set "initialization complete" bit to move adapter to
923 * D0 state */
924 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
925 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
927 /* wait for clock stabilization */
928 for (i = 0; i < 10000; i++) {
929 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
931 /* check clock ready bit */
932 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
933 if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
934 break;
937 if (i == 10000)
938 return -EIO; /* TODO: better error value */
940 /* set D0 standby bit */
941 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
942 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
943 r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
945 return 0;
948 /*********************************************************************
949 Procedure : ipw2100_download_firmware
950 Purpose : Initiaze adapter after power on.
951 The sequence is:
952 1. assert s/w reset first!
953 2. awake clocks & wait for clock stabilization
954 3. hold ARC (don't ask me why...)
955 4. load Dino ucode and reset/clock init again
956 5. zero-out shared mem
957 6. download f/w
958 *******************************************************************/
959 static int ipw2100_download_firmware(struct ipw2100_priv *priv)
961 u32 address;
962 int err;
964 #ifndef CONFIG_PM
965 /* Fetch the firmware and microcode */
966 struct ipw2100_fw ipw2100_firmware;
967 #endif
969 if (priv->fatal_error) {
970 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
971 "fatal error %d. Interface must be brought down.\n",
972 priv->net_dev->name, priv->fatal_error);
973 return -EINVAL;
975 #ifdef CONFIG_PM
976 if (!ipw2100_firmware.version) {
977 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
978 if (err) {
979 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
980 priv->net_dev->name, err);
981 priv->fatal_error = IPW2100_ERR_FW_LOAD;
982 goto fail;
985 #else
986 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
987 if (err) {
988 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
989 priv->net_dev->name, err);
990 priv->fatal_error = IPW2100_ERR_FW_LOAD;
991 goto fail;
993 #endif
994 priv->firmware_version = ipw2100_firmware.version;
996 /* s/w reset and clock stabilization */
997 err = sw_reset_and_clock(priv);
998 if (err) {
999 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1000 priv->net_dev->name, err);
1001 goto fail;
1004 err = ipw2100_verify(priv);
1005 if (err) {
1006 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1007 priv->net_dev->name, err);
1008 goto fail;
1011 /* Hold ARC */
1012 write_nic_dword(priv->net_dev,
1013 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000);
1015 /* allow ARC to run */
1016 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1018 /* load microcode */
1019 err = ipw2100_ucode_download(priv, &ipw2100_firmware);
1020 if (err) {
1021 printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
1022 priv->net_dev->name, err);
1023 goto fail;
1026 /* release ARC */
1027 write_nic_dword(priv->net_dev,
1028 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000);
1030 /* s/w reset and clock stabilization (again!!!) */
1031 err = sw_reset_and_clock(priv);
1032 if (err) {
1033 printk(KERN_ERR DRV_NAME
1034 ": %s: sw_reset_and_clock failed: %d\n",
1035 priv->net_dev->name, err);
1036 goto fail;
1039 /* load f/w */
1040 err = ipw2100_fw_download(priv, &ipw2100_firmware);
1041 if (err) {
1042 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1043 priv->net_dev->name, err);
1044 goto fail;
1046 #ifndef CONFIG_PM
1048 * When the .resume method of the driver is called, the other
1049 * part of the system, i.e. the ide driver could still stay in
1050 * the suspend stage. This prevents us from loading the firmware
1051 * from the disk. --YZ
1054 /* free any storage allocated for firmware image */
1055 ipw2100_release_firmware(priv, &ipw2100_firmware);
1056 #endif
1058 /* zero out Domain 1 area indirectly (Si requirement) */
1059 for (address = IPW_HOST_FW_SHARED_AREA0;
1060 address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
1061 write_nic_dword(priv->net_dev, address, 0);
1062 for (address = IPW_HOST_FW_SHARED_AREA1;
1063 address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
1064 write_nic_dword(priv->net_dev, address, 0);
1065 for (address = IPW_HOST_FW_SHARED_AREA2;
1066 address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
1067 write_nic_dword(priv->net_dev, address, 0);
1068 for (address = IPW_HOST_FW_SHARED_AREA3;
1069 address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
1070 write_nic_dword(priv->net_dev, address, 0);
1071 for (address = IPW_HOST_FW_INTERRUPT_AREA;
1072 address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
1073 write_nic_dword(priv->net_dev, address, 0);
1075 return 0;
1077 fail:
1078 ipw2100_release_firmware(priv, &ipw2100_firmware);
1079 return err;
1082 static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
1084 if (priv->status & STATUS_INT_ENABLED)
1085 return;
1086 priv->status |= STATUS_INT_ENABLED;
1087 write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
1090 static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
1092 if (!(priv->status & STATUS_INT_ENABLED))
1093 return;
1094 priv->status &= ~STATUS_INT_ENABLED;
1095 write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
1098 static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
1100 struct ipw2100_ordinals *ord = &priv->ordinals;
1102 IPW_DEBUG_INFO("enter\n");
1104 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
1105 &ord->table1_addr);
1107 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
1108 &ord->table2_addr);
1110 read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
1111 read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
1113 ord->table2_size &= 0x0000FFFF;
1115 IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
1116 IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
1117 IPW_DEBUG_INFO("exit\n");
1120 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
1122 u32 reg = 0;
1124 * Set GPIO 3 writable by FW; GPIO 1 writable
1125 * by driver and enable clock
1127 reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
1128 IPW_BIT_GPIO_LED_OFF);
1129 write_register(priv->net_dev, IPW_REG_GPIO, reg);
1132 static int rf_kill_active(struct ipw2100_priv *priv)
1134 #define MAX_RF_KILL_CHECKS 5
1135 #define RF_KILL_CHECK_DELAY 40
1137 unsigned short value = 0;
1138 u32 reg = 0;
1139 int i;
1141 if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
1142 priv->status &= ~STATUS_RF_KILL_HW;
1143 return 0;
1146 for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
1147 udelay(RF_KILL_CHECK_DELAY);
1148 read_register(priv->net_dev, IPW_REG_GPIO, &reg);
1149 value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
1152 if (value == 0)
1153 priv->status |= STATUS_RF_KILL_HW;
1154 else
1155 priv->status &= ~STATUS_RF_KILL_HW;
1157 return (value == 0);
1160 static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
1162 u32 addr, len;
1163 u32 val;
1166 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1168 len = sizeof(addr);
1169 if (ipw2100_get_ordinal
1170 (priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) {
1171 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1172 __LINE__);
1173 return -EIO;
1176 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
1179 * EEPROM version is the byte at offset 0xfd in firmware
1180 * We read 4 bytes, then shift out the byte we actually want */
1181 read_nic_dword(priv->net_dev, addr + 0xFC, &val);
1182 priv->eeprom_version = (val >> 24) & 0xFF;
1183 IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
1186 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1188 * notice that the EEPROM bit is reverse polarity, i.e.
1189 * bit = 0 signifies HW RF kill switch is supported
1190 * bit = 1 signifies HW RF kill switch is NOT supported
1192 read_nic_dword(priv->net_dev, addr + 0x20, &val);
1193 if (!((val >> 24) & 0x01))
1194 priv->hw_features |= HW_FEATURE_RFKILL;
1196 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1197 (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not ");
1199 return 0;
1203 * Start firmware execution after power on and intialization
1204 * The sequence is:
1205 * 1. Release ARC
1206 * 2. Wait for f/w initialization completes;
1208 static int ipw2100_start_adapter(struct ipw2100_priv *priv)
1210 int i;
1211 u32 inta, inta_mask, gpio;
1213 IPW_DEBUG_INFO("enter\n");
1215 if (priv->status & STATUS_RUNNING)
1216 return 0;
1219 * Initialize the hw - drive adapter to DO state by setting
1220 * init_done bit. Wait for clk_ready bit and Download
1221 * fw & dino ucode
1223 if (ipw2100_download_firmware(priv)) {
1224 printk(KERN_ERR DRV_NAME
1225 ": %s: Failed to power on the adapter.\n",
1226 priv->net_dev->name);
1227 return -EIO;
1230 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1231 * in the firmware RBD and TBD ring queue */
1232 ipw2100_queues_initialize(priv);
1234 ipw2100_hw_set_gpio(priv);
1236 /* TODO -- Look at disabling interrupts here to make sure none
1237 * get fired during FW initialization */
1239 /* Release ARC - clear reset bit */
1240 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1242 /* wait for f/w intialization complete */
1243 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1244 i = 5000;
1245 do {
1246 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1247 /* Todo... wait for sync command ... */
1249 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1251 /* check "init done" bit */
1252 if (inta & IPW2100_INTA_FW_INIT_DONE) {
1253 /* reset "init done" bit */
1254 write_register(priv->net_dev, IPW_REG_INTA,
1255 IPW2100_INTA_FW_INIT_DONE);
1256 break;
1259 /* check error conditions : we check these after the firmware
1260 * check so that if there is an error, the interrupt handler
1261 * will see it and the adapter will be reset */
1262 if (inta &
1263 (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
1264 /* clear error conditions */
1265 write_register(priv->net_dev, IPW_REG_INTA,
1266 IPW2100_INTA_FATAL_ERROR |
1267 IPW2100_INTA_PARITY_ERROR);
1269 } while (i--);
1271 /* Clear out any pending INTAs since we aren't supposed to have
1272 * interrupts enabled at this point... */
1273 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1274 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
1275 inta &= IPW_INTERRUPT_MASK;
1276 /* Clear out any pending interrupts */
1277 if (inta & inta_mask)
1278 write_register(priv->net_dev, IPW_REG_INTA, inta);
1280 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1281 i ? "SUCCESS" : "FAILED");
1283 if (!i) {
1284 printk(KERN_WARNING DRV_NAME
1285 ": %s: Firmware did not initialize.\n",
1286 priv->net_dev->name);
1287 return -EIO;
1290 /* allow firmware to write to GPIO1 & GPIO3 */
1291 read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
1293 gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
1295 write_register(priv->net_dev, IPW_REG_GPIO, gpio);
1297 /* Ready to receive commands */
1298 priv->status |= STATUS_RUNNING;
1300 /* The adapter has been reset; we are not associated */
1301 priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
1303 IPW_DEBUG_INFO("exit\n");
1305 return 0;
1308 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
1310 if (!priv->fatal_error)
1311 return;
1313 priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
1314 priv->fatal_index %= IPW2100_ERROR_QUEUE;
1315 priv->fatal_error = 0;
1318 /* NOTE: Our interrupt is disabled when this method is called */
1319 static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
1321 u32 reg;
1322 int i;
1324 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1326 ipw2100_hw_set_gpio(priv);
1328 /* Step 1. Stop Master Assert */
1329 write_register(priv->net_dev, IPW_REG_RESET_REG,
1330 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1332 /* Step 2. Wait for stop Master Assert
1333 * (not more then 50us, otherwise ret error */
1334 i = 5;
1335 do {
1336 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
1337 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
1339 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1340 break;
1341 } while (i--);
1343 priv->status &= ~STATUS_RESET_PENDING;
1345 if (!i) {
1346 IPW_DEBUG_INFO
1347 ("exit - waited too long for master assert stop\n");
1348 return -EIO;
1351 write_register(priv->net_dev, IPW_REG_RESET_REG,
1352 IPW_AUX_HOST_RESET_REG_SW_RESET);
1354 /* Reset any fatal_error conditions */
1355 ipw2100_reset_fatalerror(priv);
1357 /* At this point, the adapter is now stopped and disabled */
1358 priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
1359 STATUS_ASSOCIATED | STATUS_ENABLED);
1361 return 0;
1365 * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
1367 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1369 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1370 * if STATUS_ASSN_LOST is sent.
1372 static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
1375 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1377 struct host_command cmd = {
1378 .host_command = CARD_DISABLE_PHY_OFF,
1379 .host_command_sequence = 0,
1380 .host_command_length = 0,
1382 int err, i;
1383 u32 val1, val2;
1385 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1387 /* Turn off the radio */
1388 err = ipw2100_hw_send_command(priv, &cmd);
1389 if (err)
1390 return err;
1392 for (i = 0; i < 2500; i++) {
1393 read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
1394 read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
1396 if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
1397 (val2 & IPW2100_COMMAND_PHY_OFF))
1398 return 0;
1400 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
1403 return -EIO;
1406 static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
1408 struct host_command cmd = {
1409 .host_command = HOST_COMPLETE,
1410 .host_command_sequence = 0,
1411 .host_command_length = 0
1413 int err = 0;
1415 IPW_DEBUG_HC("HOST_COMPLETE\n");
1417 if (priv->status & STATUS_ENABLED)
1418 return 0;
1420 mutex_lock(&priv->adapter_mutex);
1422 if (rf_kill_active(priv)) {
1423 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1424 goto fail_up;
1427 err = ipw2100_hw_send_command(priv, &cmd);
1428 if (err) {
1429 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1430 goto fail_up;
1433 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
1434 if (err) {
1435 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1436 priv->net_dev->name);
1437 goto fail_up;
1440 if (priv->stop_hang_check) {
1441 priv->stop_hang_check = 0;
1442 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
1445 fail_up:
1446 mutex_unlock(&priv->adapter_mutex);
1447 return err;
1450 static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
1452 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1454 struct host_command cmd = {
1455 .host_command = HOST_PRE_POWER_DOWN,
1456 .host_command_sequence = 0,
1457 .host_command_length = 0,
1459 int err, i;
1460 u32 reg;
1462 if (!(priv->status & STATUS_RUNNING))
1463 return 0;
1465 priv->status |= STATUS_STOPPING;
1467 /* We can only shut down the card if the firmware is operational. So,
1468 * if we haven't reset since a fatal_error, then we can not send the
1469 * shutdown commands. */
1470 if (!priv->fatal_error) {
1471 /* First, make sure the adapter is enabled so that the PHY_OFF
1472 * command can shut it down */
1473 ipw2100_enable_adapter(priv);
1475 err = ipw2100_hw_phy_off(priv);
1476 if (err)
1477 printk(KERN_WARNING DRV_NAME
1478 ": Error disabling radio %d\n", err);
1481 * If in D0-standby mode going directly to D3 may cause a
1482 * PCI bus violation. Therefore we must change out of the D0
1483 * state.
1485 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1486 * hardware from going into standby mode and will transition
1487 * out of D0-standby if it is already in that state.
1489 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1490 * driver upon completion. Once received, the driver can
1491 * proceed to the D3 state.
1493 * Prepare for power down command to fw. This command would
1494 * take HW out of D0-standby and prepare it for D3 state.
1496 * Currently FW does not support event notification for this
1497 * event. Therefore, skip waiting for it. Just wait a fixed
1498 * 100ms
1500 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1502 err = ipw2100_hw_send_command(priv, &cmd);
1503 if (err)
1504 printk(KERN_WARNING DRV_NAME ": "
1505 "%s: Power down command failed: Error %d\n",
1506 priv->net_dev->name, err);
1507 else
1508 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
1511 priv->status &= ~STATUS_ENABLED;
1514 * Set GPIO 3 writable by FW; GPIO 1 writable
1515 * by driver and enable clock
1517 ipw2100_hw_set_gpio(priv);
1520 * Power down adapter. Sequence:
1521 * 1. Stop master assert (RESET_REG[9]=1)
1522 * 2. Wait for stop master (RESET_REG[8]==1)
1523 * 3. S/w reset assert (RESET_REG[7] = 1)
1526 /* Stop master assert */
1527 write_register(priv->net_dev, IPW_REG_RESET_REG,
1528 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1530 /* wait stop master not more than 50 usec.
1531 * Otherwise return error. */
1532 for (i = 5; i > 0; i--) {
1533 udelay(10);
1535 /* Check master stop bit */
1536 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
1538 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1539 break;
1542 if (i == 0)
1543 printk(KERN_WARNING DRV_NAME
1544 ": %s: Could now power down adapter.\n",
1545 priv->net_dev->name);
1547 /* assert s/w reset */
1548 write_register(priv->net_dev, IPW_REG_RESET_REG,
1549 IPW_AUX_HOST_RESET_REG_SW_RESET);
1551 priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
1553 return 0;
1556 static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
1558 struct host_command cmd = {
1559 .host_command = CARD_DISABLE,
1560 .host_command_sequence = 0,
1561 .host_command_length = 0
1563 int err = 0;
1565 IPW_DEBUG_HC("CARD_DISABLE\n");
1567 if (!(priv->status & STATUS_ENABLED))
1568 return 0;
1570 /* Make sure we clear the associated state */
1571 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1573 if (!priv->stop_hang_check) {
1574 priv->stop_hang_check = 1;
1575 cancel_delayed_work(&priv->hang_check);
1578 mutex_lock(&priv->adapter_mutex);
1580 err = ipw2100_hw_send_command(priv, &cmd);
1581 if (err) {
1582 printk(KERN_WARNING DRV_NAME
1583 ": exit - failed to send CARD_DISABLE command\n");
1584 goto fail_up;
1587 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
1588 if (err) {
1589 printk(KERN_WARNING DRV_NAME
1590 ": exit - card failed to change to DISABLED\n");
1591 goto fail_up;
1594 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1596 fail_up:
1597 mutex_unlock(&priv->adapter_mutex);
1598 return err;
1601 static int ipw2100_set_scan_options(struct ipw2100_priv *priv)
1603 struct host_command cmd = {
1604 .host_command = SET_SCAN_OPTIONS,
1605 .host_command_sequence = 0,
1606 .host_command_length = 8
1608 int err;
1610 IPW_DEBUG_INFO("enter\n");
1612 IPW_DEBUG_SCAN("setting scan options\n");
1614 cmd.host_command_parameters[0] = 0;
1616 if (!(priv->config & CFG_ASSOCIATE))
1617 cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
1618 if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled)
1619 cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
1620 if (priv->config & CFG_PASSIVE_SCAN)
1621 cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
1623 cmd.host_command_parameters[1] = priv->channel_mask;
1625 err = ipw2100_hw_send_command(priv, &cmd);
1627 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1628 cmd.host_command_parameters[0]);
1630 return err;
1633 static int ipw2100_start_scan(struct ipw2100_priv *priv)
1635 struct host_command cmd = {
1636 .host_command = BROADCAST_SCAN,
1637 .host_command_sequence = 0,
1638 .host_command_length = 4
1640 int err;
1642 IPW_DEBUG_HC("START_SCAN\n");
1644 cmd.host_command_parameters[0] = 0;
1646 /* No scanning if in monitor mode */
1647 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
1648 return 1;
1650 if (priv->status & STATUS_SCANNING) {
1651 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1652 return 0;
1655 IPW_DEBUG_INFO("enter\n");
1657 /* Not clearing here; doing so makes iwlist always return nothing...
1659 * We should modify the table logic to use aging tables vs. clearing
1660 * the table on each scan start.
1662 IPW_DEBUG_SCAN("starting scan\n");
1664 priv->status |= STATUS_SCANNING;
1665 err = ipw2100_hw_send_command(priv, &cmd);
1666 if (err)
1667 priv->status &= ~STATUS_SCANNING;
1669 IPW_DEBUG_INFO("exit\n");
1671 return err;
1674 static const struct ieee80211_geo ipw_geos[] = {
1675 { /* Restricted */
1676 "---",
1677 .bg_channels = 14,
1678 .bg = {{2412, 1}, {2417, 2}, {2422, 3},
1679 {2427, 4}, {2432, 5}, {2437, 6},
1680 {2442, 7}, {2447, 8}, {2452, 9},
1681 {2457, 10}, {2462, 11}, {2467, 12},
1682 {2472, 13}, {2484, 14}},
1686 static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
1688 unsigned long flags;
1689 int rc = 0;
1690 u32 lock;
1691 u32 ord_len = sizeof(lock);
1693 /* Quite if manually disabled. */
1694 if (priv->status & STATUS_RF_KILL_SW) {
1695 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1696 "switch\n", priv->net_dev->name);
1697 return 0;
1700 /* If the interrupt is enabled, turn it off... */
1701 spin_lock_irqsave(&priv->low_lock, flags);
1702 ipw2100_disable_interrupts(priv);
1704 /* Reset any fatal_error conditions */
1705 ipw2100_reset_fatalerror(priv);
1706 spin_unlock_irqrestore(&priv->low_lock, flags);
1708 if (priv->status & STATUS_POWERED ||
1709 (priv->status & STATUS_RESET_PENDING)) {
1710 /* Power cycle the card ... */
1711 if (ipw2100_power_cycle_adapter(priv)) {
1712 printk(KERN_WARNING DRV_NAME
1713 ": %s: Could not cycle adapter.\n",
1714 priv->net_dev->name);
1715 rc = 1;
1716 goto exit;
1718 } else
1719 priv->status |= STATUS_POWERED;
1721 /* Load the firmware, start the clocks, etc. */
1722 if (ipw2100_start_adapter(priv)) {
1723 printk(KERN_ERR DRV_NAME
1724 ": %s: Failed to start the firmware.\n",
1725 priv->net_dev->name);
1726 rc = 1;
1727 goto exit;
1730 ipw2100_initialize_ordinals(priv);
1732 /* Determine capabilities of this particular HW configuration */
1733 if (ipw2100_get_hw_features(priv)) {
1734 printk(KERN_ERR DRV_NAME
1735 ": %s: Failed to determine HW features.\n",
1736 priv->net_dev->name);
1737 rc = 1;
1738 goto exit;
1741 /* Initialize the geo */
1742 if (ieee80211_set_geo(priv->ieee, &ipw_geos[0])) {
1743 printk(KERN_WARNING DRV_NAME "Could not set geo\n");
1744 return 0;
1746 priv->ieee->freq_band = IEEE80211_24GHZ_BAND;
1748 lock = LOCK_NONE;
1749 if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
1750 printk(KERN_ERR DRV_NAME
1751 ": %s: Failed to clear ordinal lock.\n",
1752 priv->net_dev->name);
1753 rc = 1;
1754 goto exit;
1757 priv->status &= ~STATUS_SCANNING;
1759 if (rf_kill_active(priv)) {
1760 printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
1761 priv->net_dev->name);
1763 if (priv->stop_rf_kill) {
1764 priv->stop_rf_kill = 0;
1765 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
1768 deferred = 1;
1771 /* Turn on the interrupt so that commands can be processed */
1772 ipw2100_enable_interrupts(priv);
1774 /* Send all of the commands that must be sent prior to
1775 * HOST_COMPLETE */
1776 if (ipw2100_adapter_setup(priv)) {
1777 printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
1778 priv->net_dev->name);
1779 rc = 1;
1780 goto exit;
1783 if (!deferred) {
1784 /* Enable the adapter - sends HOST_COMPLETE */
1785 if (ipw2100_enable_adapter(priv)) {
1786 printk(KERN_ERR DRV_NAME ": "
1787 "%s: failed in call to enable adapter.\n",
1788 priv->net_dev->name);
1789 ipw2100_hw_stop_adapter(priv);
1790 rc = 1;
1791 goto exit;
1794 /* Start a scan . . . */
1795 ipw2100_set_scan_options(priv);
1796 ipw2100_start_scan(priv);
1799 exit:
1800 return rc;
1803 /* Called by register_netdev() */
1804 static int ipw2100_net_init(struct net_device *dev)
1806 struct ipw2100_priv *priv = ieee80211_priv(dev);
1807 return ipw2100_up(priv, 1);
1810 static void ipw2100_down(struct ipw2100_priv *priv)
1812 unsigned long flags;
1813 union iwreq_data wrqu = {
1814 .ap_addr = {
1815 .sa_family = ARPHRD_ETHER}
1817 int associated = priv->status & STATUS_ASSOCIATED;
1819 /* Kill the RF switch timer */
1820 if (!priv->stop_rf_kill) {
1821 priv->stop_rf_kill = 1;
1822 cancel_delayed_work(&priv->rf_kill);
1825 /* Kill the firmare hang check timer */
1826 if (!priv->stop_hang_check) {
1827 priv->stop_hang_check = 1;
1828 cancel_delayed_work(&priv->hang_check);
1831 /* Kill any pending resets */
1832 if (priv->status & STATUS_RESET_PENDING)
1833 cancel_delayed_work(&priv->reset_work);
1835 /* Make sure the interrupt is on so that FW commands will be
1836 * processed correctly */
1837 spin_lock_irqsave(&priv->low_lock, flags);
1838 ipw2100_enable_interrupts(priv);
1839 spin_unlock_irqrestore(&priv->low_lock, flags);
1841 if (ipw2100_hw_stop_adapter(priv))
1842 printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
1843 priv->net_dev->name);
1845 /* Do not disable the interrupt until _after_ we disable
1846 * the adaptor. Otherwise the CARD_DISABLE command will never
1847 * be ack'd by the firmware */
1848 spin_lock_irqsave(&priv->low_lock, flags);
1849 ipw2100_disable_interrupts(priv);
1850 spin_unlock_irqrestore(&priv->low_lock, flags);
1852 #ifdef ACPI_CSTATE_LIMIT_DEFINED
1853 if (priv->config & CFG_C3_DISABLED) {
1854 IPW_DEBUG_INFO(": Resetting C3 transitions.\n");
1855 acpi_set_cstate_limit(priv->cstate_limit);
1856 priv->config &= ~CFG_C3_DISABLED;
1858 #endif
1860 /* We have to signal any supplicant if we are disassociating */
1861 if (associated)
1862 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1864 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1865 netif_carrier_off(priv->net_dev);
1866 netif_stop_queue(priv->net_dev);
1869 static void ipw2100_reset_adapter(struct ipw2100_priv *priv)
1871 unsigned long flags;
1872 union iwreq_data wrqu = {
1873 .ap_addr = {
1874 .sa_family = ARPHRD_ETHER}
1876 int associated = priv->status & STATUS_ASSOCIATED;
1878 spin_lock_irqsave(&priv->low_lock, flags);
1879 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name);
1880 priv->resets++;
1881 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1882 priv->status |= STATUS_SECURITY_UPDATED;
1884 /* Force a power cycle even if interface hasn't been opened
1885 * yet */
1886 cancel_delayed_work(&priv->reset_work);
1887 priv->status |= STATUS_RESET_PENDING;
1888 spin_unlock_irqrestore(&priv->low_lock, flags);
1890 mutex_lock(&priv->action_mutex);
1891 /* stop timed checks so that they don't interfere with reset */
1892 priv->stop_hang_check = 1;
1893 cancel_delayed_work(&priv->hang_check);
1895 /* We have to signal any supplicant if we are disassociating */
1896 if (associated)
1897 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1899 ipw2100_up(priv, 0);
1900 mutex_unlock(&priv->action_mutex);
1904 static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
1907 #define MAC_ASSOCIATION_READ_DELAY (HZ)
1908 int ret, len, essid_len;
1909 char essid[IW_ESSID_MAX_SIZE];
1910 u32 txrate;
1911 u32 chan;
1912 char *txratename;
1913 u8 bssid[ETH_ALEN];
1916 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
1917 * an actual MAC of the AP. Seems like FW sets this
1918 * address too late. Read it later and expose through
1919 * /proc or schedule a later task to query and update
1922 essid_len = IW_ESSID_MAX_SIZE;
1923 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
1924 essid, &essid_len);
1925 if (ret) {
1926 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1927 __LINE__);
1928 return;
1931 len = sizeof(u32);
1932 ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len);
1933 if (ret) {
1934 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1935 __LINE__);
1936 return;
1939 len = sizeof(u32);
1940 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
1941 if (ret) {
1942 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1943 __LINE__);
1944 return;
1946 len = ETH_ALEN;
1947 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
1948 if (ret) {
1949 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1950 __LINE__);
1951 return;
1953 memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
1955 switch (txrate) {
1956 case TX_RATE_1_MBIT:
1957 txratename = "1Mbps";
1958 break;
1959 case TX_RATE_2_MBIT:
1960 txratename = "2Mbsp";
1961 break;
1962 case TX_RATE_5_5_MBIT:
1963 txratename = "5.5Mbps";
1964 break;
1965 case TX_RATE_11_MBIT:
1966 txratename = "11Mbps";
1967 break;
1968 default:
1969 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
1970 txratename = "unknown rate";
1971 break;
1974 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID="
1975 MAC_FMT ")\n",
1976 priv->net_dev->name, escape_essid(essid, essid_len),
1977 txratename, chan, MAC_ARG(bssid));
1979 /* now we copy read ssid into dev */
1980 if (!(priv->config & CFG_STATIC_ESSID)) {
1981 priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE);
1982 memcpy(priv->essid, essid, priv->essid_len);
1984 priv->channel = chan;
1985 memcpy(priv->bssid, bssid, ETH_ALEN);
1987 priv->status |= STATUS_ASSOCIATING;
1988 priv->connect_start = get_seconds();
1990 queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
1993 static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
1994 int length, int batch_mode)
1996 int ssid_len = min(length, IW_ESSID_MAX_SIZE);
1997 struct host_command cmd = {
1998 .host_command = SSID,
1999 .host_command_sequence = 0,
2000 .host_command_length = ssid_len
2002 int err;
2004 IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len));
2006 if (ssid_len)
2007 memcpy(cmd.host_command_parameters, essid, ssid_len);
2009 if (!batch_mode) {
2010 err = ipw2100_disable_adapter(priv);
2011 if (err)
2012 return err;
2015 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2016 * disable auto association -- so we cheat by setting a bogus SSID */
2017 if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
2018 int i;
2019 u8 *bogus = (u8 *) cmd.host_command_parameters;
2020 for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
2021 bogus[i] = 0x18 + i;
2022 cmd.host_command_length = IW_ESSID_MAX_SIZE;
2025 /* NOTE: We always send the SSID command even if the provided ESSID is
2026 * the same as what we currently think is set. */
2028 err = ipw2100_hw_send_command(priv, &cmd);
2029 if (!err) {
2030 memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len);
2031 memcpy(priv->essid, essid, ssid_len);
2032 priv->essid_len = ssid_len;
2035 if (!batch_mode) {
2036 if (ipw2100_enable_adapter(priv))
2037 err = -EIO;
2040 return err;
2043 static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
2045 IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
2046 "disassociated: '%s' " MAC_FMT " \n",
2047 escape_essid(priv->essid, priv->essid_len),
2048 MAC_ARG(priv->bssid));
2050 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
2052 if (priv->status & STATUS_STOPPING) {
2053 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2054 return;
2057 memset(priv->bssid, 0, ETH_ALEN);
2058 memset(priv->ieee->bssid, 0, ETH_ALEN);
2060 netif_carrier_off(priv->net_dev);
2061 netif_stop_queue(priv->net_dev);
2063 if (!(priv->status & STATUS_RUNNING))
2064 return;
2066 if (priv->status & STATUS_SECURITY_UPDATED)
2067 queue_work(priv->workqueue, &priv->security_work);
2069 queue_work(priv->workqueue, &priv->wx_event_work);
2072 static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
2074 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2075 priv->net_dev->name);
2077 /* RF_KILL is now enabled (else we wouldn't be here) */
2078 priv->status |= STATUS_RF_KILL_HW;
2080 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2081 if (priv->config & CFG_C3_DISABLED) {
2082 IPW_DEBUG_INFO(": Resetting C3 transitions.\n");
2083 acpi_set_cstate_limit(priv->cstate_limit);
2084 priv->config &= ~CFG_C3_DISABLED;
2086 #endif
2088 /* Make sure the RF Kill check timer is running */
2089 priv->stop_rf_kill = 0;
2090 cancel_delayed_work(&priv->rf_kill);
2091 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
2094 static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
2096 IPW_DEBUG_SCAN("scan complete\n");
2097 /* Age the scan results... */
2098 priv->ieee->scans++;
2099 priv->status &= ~STATUS_SCANNING;
2102 #ifdef CONFIG_IPW2100_DEBUG
2103 #define IPW2100_HANDLER(v, f) { v, f, # v }
2104 struct ipw2100_status_indicator {
2105 int status;
2106 void (*cb) (struct ipw2100_priv * priv, u32 status);
2107 char *name;
2109 #else
2110 #define IPW2100_HANDLER(v, f) { v, f }
2111 struct ipw2100_status_indicator {
2112 int status;
2113 void (*cb) (struct ipw2100_priv * priv, u32 status);
2115 #endif /* CONFIG_IPW2100_DEBUG */
2117 static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
2119 IPW_DEBUG_SCAN("Scanning...\n");
2120 priv->status |= STATUS_SCANNING;
2123 static const struct ipw2100_status_indicator status_handlers[] = {
2124 IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL),
2125 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL),
2126 IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
2127 IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
2128 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL),
2129 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
2130 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL),
2131 IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL),
2132 IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
2133 IPW2100_HANDLER(IPW_STATE_DISABLED, NULL),
2134 IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL),
2135 IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
2136 IPW2100_HANDLER(-1, NULL)
2139 static void isr_status_change(struct ipw2100_priv *priv, int status)
2141 int i;
2143 if (status == IPW_STATE_SCANNING &&
2144 priv->status & STATUS_ASSOCIATED &&
2145 !(priv->status & STATUS_SCANNING)) {
2146 IPW_DEBUG_INFO("Scan detected while associated, with "
2147 "no scan request. Restarting firmware.\n");
2149 /* Wake up any sleeping jobs */
2150 schedule_reset(priv);
2153 for (i = 0; status_handlers[i].status != -1; i++) {
2154 if (status == status_handlers[i].status) {
2155 IPW_DEBUG_NOTIF("Status change: %s\n",
2156 status_handlers[i].name);
2157 if (status_handlers[i].cb)
2158 status_handlers[i].cb(priv, status);
2159 priv->wstats.status = status;
2160 return;
2164 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
2167 static void isr_rx_complete_command(struct ipw2100_priv *priv,
2168 struct ipw2100_cmd_header *cmd)
2170 #ifdef CONFIG_IPW2100_DEBUG
2171 if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
2172 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2173 command_types[cmd->host_command_reg],
2174 cmd->host_command_reg);
2176 #endif
2177 if (cmd->host_command_reg == HOST_COMPLETE)
2178 priv->status |= STATUS_ENABLED;
2180 if (cmd->host_command_reg == CARD_DISABLE)
2181 priv->status &= ~STATUS_ENABLED;
2183 priv->status &= ~STATUS_CMD_ACTIVE;
2185 wake_up_interruptible(&priv->wait_command_queue);
2188 #ifdef CONFIG_IPW2100_DEBUG
2189 static const char *frame_types[] = {
2190 "COMMAND_STATUS_VAL",
2191 "STATUS_CHANGE_VAL",
2192 "P80211_DATA_VAL",
2193 "P8023_DATA_VAL",
2194 "HOST_NOTIFICATION_VAL"
2196 #endif
2198 static int ipw2100_alloc_skb(struct ipw2100_priv *priv,
2199 struct ipw2100_rx_packet *packet)
2201 packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
2202 if (!packet->skb)
2203 return -ENOMEM;
2205 packet->rxp = (struct ipw2100_rx *)packet->skb->data;
2206 packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
2207 sizeof(struct ipw2100_rx),
2208 PCI_DMA_FROMDEVICE);
2209 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2210 * dma_addr */
2212 return 0;
2215 #define SEARCH_ERROR 0xffffffff
2216 #define SEARCH_FAIL 0xfffffffe
2217 #define SEARCH_SUCCESS 0xfffffff0
2218 #define SEARCH_DISCARD 0
2219 #define SEARCH_SNAPSHOT 1
2221 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2222 static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
2224 int i;
2225 if (!priv->snapshot[0])
2226 return;
2227 for (i = 0; i < 0x30; i++)
2228 kfree(priv->snapshot[i]);
2229 priv->snapshot[0] = NULL;
2232 #ifdef CONFIG_IPW2100_DEBUG_C3
2233 static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
2235 int i;
2236 if (priv->snapshot[0])
2237 return 1;
2238 for (i = 0; i < 0x30; i++) {
2239 priv->snapshot[i] = (u8 *) kmalloc(0x1000, GFP_ATOMIC);
2240 if (!priv->snapshot[i]) {
2241 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2242 "buffer %d\n", priv->net_dev->name, i);
2243 while (i > 0)
2244 kfree(priv->snapshot[--i]);
2245 priv->snapshot[0] = NULL;
2246 return 0;
2250 return 1;
2253 static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
2254 size_t len, int mode)
2256 u32 i, j;
2257 u32 tmp;
2258 u8 *s, *d;
2259 u32 ret;
2261 s = in_buf;
2262 if (mode == SEARCH_SNAPSHOT) {
2263 if (!ipw2100_snapshot_alloc(priv))
2264 mode = SEARCH_DISCARD;
2267 for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
2268 read_nic_dword(priv->net_dev, i, &tmp);
2269 if (mode == SEARCH_SNAPSHOT)
2270 *(u32 *) SNAPSHOT_ADDR(i) = tmp;
2271 if (ret == SEARCH_FAIL) {
2272 d = (u8 *) & tmp;
2273 for (j = 0; j < 4; j++) {
2274 if (*s != *d) {
2275 s = in_buf;
2276 continue;
2279 s++;
2280 d++;
2282 if ((s - in_buf) == len)
2283 ret = (i + j) - len + 1;
2285 } else if (mode == SEARCH_DISCARD)
2286 return ret;
2289 return ret;
2291 #endif
2295 * 0) Disconnect the SKB from the firmware (just unmap)
2296 * 1) Pack the ETH header into the SKB
2297 * 2) Pass the SKB to the network stack
2299 * When packet is provided by the firmware, it contains the following:
2301 * . ieee80211_hdr
2302 * . ieee80211_snap_hdr
2304 * The size of the constructed ethernet
2307 #ifdef CONFIG_IPW2100_RX_DEBUG
2308 static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
2309 #endif
2311 static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
2313 #ifdef CONFIG_IPW2100_DEBUG_C3
2314 struct ipw2100_status *status = &priv->status_queue.drv[i];
2315 u32 match, reg;
2316 int j;
2317 #endif
2318 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2319 int limit;
2320 #endif
2322 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2323 i * sizeof(struct ipw2100_status));
2325 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2326 IPW_DEBUG_INFO(": Disabling C3 transitions.\n");
2327 limit = acpi_get_cstate_limit();
2328 if (limit > 2) {
2329 priv->cstate_limit = limit;
2330 acpi_set_cstate_limit(2);
2331 priv->config |= CFG_C3_DISABLED;
2333 #endif
2335 #ifdef CONFIG_IPW2100_DEBUG_C3
2336 /* Halt the fimrware so we can get a good image */
2337 write_register(priv->net_dev, IPW_REG_RESET_REG,
2338 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
2339 j = 5;
2340 do {
2341 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
2342 read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
2344 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
2345 break;
2346 } while (j--);
2348 match = ipw2100_match_buf(priv, (u8 *) status,
2349 sizeof(struct ipw2100_status),
2350 SEARCH_SNAPSHOT);
2351 if (match < SEARCH_SUCCESS)
2352 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2353 "offset 0x%06X, length %d:\n",
2354 priv->net_dev->name, match,
2355 sizeof(struct ipw2100_status));
2356 else
2357 IPW_DEBUG_INFO("%s: No DMA status match in "
2358 "Firmware.\n", priv->net_dev->name);
2360 printk_buf((u8 *) priv->status_queue.drv,
2361 sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
2362 #endif
2364 priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
2365 priv->ieee->stats.rx_errors++;
2366 schedule_reset(priv);
2369 static void isr_rx(struct ipw2100_priv *priv, int i,
2370 struct ieee80211_rx_stats *stats)
2372 struct ipw2100_status *status = &priv->status_queue.drv[i];
2373 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2375 IPW_DEBUG_RX("Handler...\n");
2377 if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
2378 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2379 " Dropping.\n",
2380 priv->net_dev->name,
2381 status->frame_size, skb_tailroom(packet->skb));
2382 priv->ieee->stats.rx_errors++;
2383 return;
2386 if (unlikely(!netif_running(priv->net_dev))) {
2387 priv->ieee->stats.rx_errors++;
2388 priv->wstats.discard.misc++;
2389 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2390 return;
2393 if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
2394 !(priv->status & STATUS_ASSOCIATED))) {
2395 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2396 priv->wstats.discard.misc++;
2397 return;
2400 pci_unmap_single(priv->pci_dev,
2401 packet->dma_addr,
2402 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2404 skb_put(packet->skb, status->frame_size);
2406 #ifdef CONFIG_IPW2100_RX_DEBUG
2407 /* Make a copy of the frame so we can dump it to the logs if
2408 * ieee80211_rx fails */
2409 memcpy(packet_data, packet->skb->data,
2410 min_t(u32, status->frame_size, IPW_RX_NIC_BUFFER_LENGTH));
2411 #endif
2413 if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
2414 #ifdef CONFIG_IPW2100_RX_DEBUG
2415 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2416 priv->net_dev->name);
2417 printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
2418 #endif
2419 priv->ieee->stats.rx_errors++;
2421 /* ieee80211_rx failed, so it didn't free the SKB */
2422 dev_kfree_skb_any(packet->skb);
2423 packet->skb = NULL;
2426 /* We need to allocate a new SKB and attach it to the RDB. */
2427 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2428 printk(KERN_WARNING DRV_NAME ": "
2429 "%s: Unable to allocate SKB onto RBD ring - disabling "
2430 "adapter.\n", priv->net_dev->name);
2431 /* TODO: schedule adapter shutdown */
2432 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2435 /* Update the RDB entry */
2436 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2439 #ifdef CONFIG_IPW2100_MONITOR
2441 static void isr_rx_monitor(struct ipw2100_priv *priv, int i,
2442 struct ieee80211_rx_stats *stats)
2444 struct ipw2100_status *status = &priv->status_queue.drv[i];
2445 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2447 /* Magic struct that slots into the radiotap header -- no reason
2448 * to build this manually element by element, we can write it much
2449 * more efficiently than we can parse it. ORDER MATTERS HERE */
2450 struct ipw_rt_hdr {
2451 struct ieee80211_radiotap_header rt_hdr;
2452 s8 rt_dbmsignal; /* signal in dbM, kluged to signed */
2453 } *ipw_rt;
2455 IPW_DEBUG_RX("Handler...\n");
2457 if (unlikely(status->frame_size > skb_tailroom(packet->skb) -
2458 sizeof(struct ipw_rt_hdr))) {
2459 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2460 " Dropping.\n",
2461 priv->net_dev->name,
2462 status->frame_size,
2463 skb_tailroom(packet->skb));
2464 priv->ieee->stats.rx_errors++;
2465 return;
2468 if (unlikely(!netif_running(priv->net_dev))) {
2469 priv->ieee->stats.rx_errors++;
2470 priv->wstats.discard.misc++;
2471 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2472 return;
2475 if (unlikely(priv->config & CFG_CRC_CHECK &&
2476 status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
2477 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2478 priv->ieee->stats.rx_errors++;
2479 return;
2482 pci_unmap_single(priv->pci_dev, packet->dma_addr,
2483 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2484 memmove(packet->skb->data + sizeof(struct ipw_rt_hdr),
2485 packet->skb->data, status->frame_size);
2487 ipw_rt = (struct ipw_rt_hdr *) packet->skb->data;
2489 ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
2490 ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */
2491 ipw_rt->rt_hdr.it_len = sizeof(struct ipw_rt_hdr); /* total hdr+data */
2493 ipw_rt->rt_hdr.it_present = 1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL;
2495 ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM;
2497 skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr));
2499 if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
2500 priv->ieee->stats.rx_errors++;
2502 /* ieee80211_rx failed, so it didn't free the SKB */
2503 dev_kfree_skb_any(packet->skb);
2504 packet->skb = NULL;
2507 /* We need to allocate a new SKB and attach it to the RDB. */
2508 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2509 IPW_DEBUG_WARNING(
2510 "%s: Unable to allocate SKB onto RBD ring - disabling "
2511 "adapter.\n", priv->net_dev->name);
2512 /* TODO: schedule adapter shutdown */
2513 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2516 /* Update the RDB entry */
2517 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2520 #endif
2522 static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
2524 struct ipw2100_status *status = &priv->status_queue.drv[i];
2525 struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
2526 u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
2528 switch (frame_type) {
2529 case COMMAND_STATUS_VAL:
2530 return (status->frame_size != sizeof(u->rx_data.command));
2531 case STATUS_CHANGE_VAL:
2532 return (status->frame_size != sizeof(u->rx_data.status));
2533 case HOST_NOTIFICATION_VAL:
2534 return (status->frame_size < sizeof(u->rx_data.notification));
2535 case P80211_DATA_VAL:
2536 case P8023_DATA_VAL:
2537 #ifdef CONFIG_IPW2100_MONITOR
2538 return 0;
2539 #else
2540 switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
2541 case IEEE80211_FTYPE_MGMT:
2542 case IEEE80211_FTYPE_CTL:
2543 return 0;
2544 case IEEE80211_FTYPE_DATA:
2545 return (status->frame_size >
2546 IPW_MAX_802_11_PAYLOAD_LENGTH);
2548 #endif
2551 return 1;
2555 * ipw2100 interrupts are disabled at this point, and the ISR
2556 * is the only code that calls this method. So, we do not need
2557 * to play with any locks.
2559 * RX Queue works as follows:
2561 * Read index - firmware places packet in entry identified by the
2562 * Read index and advances Read index. In this manner,
2563 * Read index will always point to the next packet to
2564 * be filled--but not yet valid.
2566 * Write index - driver fills this entry with an unused RBD entry.
2567 * This entry has not filled by the firmware yet.
2569 * In between the W and R indexes are the RBDs that have been received
2570 * but not yet processed.
2572 * The process of handling packets will start at WRITE + 1 and advance
2573 * until it reaches the READ index.
2575 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2578 static void __ipw2100_rx_process(struct ipw2100_priv *priv)
2580 struct ipw2100_bd_queue *rxq = &priv->rx_queue;
2581 struct ipw2100_status_queue *sq = &priv->status_queue;
2582 struct ipw2100_rx_packet *packet;
2583 u16 frame_type;
2584 u32 r, w, i, s;
2585 struct ipw2100_rx *u;
2586 struct ieee80211_rx_stats stats = {
2587 .mac_time = jiffies,
2590 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
2591 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
2593 if (r >= rxq->entries) {
2594 IPW_DEBUG_RX("exit - bad read index\n");
2595 return;
2598 i = (rxq->next + 1) % rxq->entries;
2599 s = i;
2600 while (i != r) {
2601 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2602 r, rxq->next, i); */
2604 packet = &priv->rx_buffers[i];
2606 /* Sync the DMA for the STATUS buffer so CPU is sure to get
2607 * the correct values */
2608 pci_dma_sync_single_for_cpu(priv->pci_dev,
2609 sq->nic +
2610 sizeof(struct ipw2100_status) * i,
2611 sizeof(struct ipw2100_status),
2612 PCI_DMA_FROMDEVICE);
2614 /* Sync the DMA for the RX buffer so CPU is sure to get
2615 * the correct values */
2616 pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
2617 sizeof(struct ipw2100_rx),
2618 PCI_DMA_FROMDEVICE);
2620 if (unlikely(ipw2100_corruption_check(priv, i))) {
2621 ipw2100_corruption_detected(priv, i);
2622 goto increment;
2625 u = packet->rxp;
2626 frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK;
2627 stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
2628 stats.len = sq->drv[i].frame_size;
2630 stats.mask = 0;
2631 if (stats.rssi != 0)
2632 stats.mask |= IEEE80211_STATMASK_RSSI;
2633 stats.freq = IEEE80211_24GHZ_BAND;
2635 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2636 priv->net_dev->name, frame_types[frame_type],
2637 stats.len);
2639 switch (frame_type) {
2640 case COMMAND_STATUS_VAL:
2641 /* Reset Rx watchdog */
2642 isr_rx_complete_command(priv, &u->rx_data.command);
2643 break;
2645 case STATUS_CHANGE_VAL:
2646 isr_status_change(priv, u->rx_data.status);
2647 break;
2649 case P80211_DATA_VAL:
2650 case P8023_DATA_VAL:
2651 #ifdef CONFIG_IPW2100_MONITOR
2652 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
2653 isr_rx_monitor(priv, i, &stats);
2654 break;
2656 #endif
2657 if (stats.len < sizeof(u->rx_data.header))
2658 break;
2659 switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
2660 case IEEE80211_FTYPE_MGMT:
2661 ieee80211_rx_mgt(priv->ieee,
2662 &u->rx_data.header, &stats);
2663 break;
2665 case IEEE80211_FTYPE_CTL:
2666 break;
2668 case IEEE80211_FTYPE_DATA:
2669 isr_rx(priv, i, &stats);
2670 break;
2673 break;
2676 increment:
2677 /* clear status field associated with this RBD */
2678 rxq->drv[i].status.info.field = 0;
2680 i = (i + 1) % rxq->entries;
2683 if (i != s) {
2684 /* backtrack one entry, wrapping to end if at 0 */
2685 rxq->next = (i ? i : rxq->entries) - 1;
2687 write_register(priv->net_dev,
2688 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next);
2693 * __ipw2100_tx_process
2695 * This routine will determine whether the next packet on
2696 * the fw_pend_list has been processed by the firmware yet.
2698 * If not, then it does nothing and returns.
2700 * If so, then it removes the item from the fw_pend_list, frees
2701 * any associated storage, and places the item back on the
2702 * free list of its source (either msg_free_list or tx_free_list)
2704 * TX Queue works as follows:
2706 * Read index - points to the next TBD that the firmware will
2707 * process. The firmware will read the data, and once
2708 * done processing, it will advance the Read index.
2710 * Write index - driver fills this entry with an constructed TBD
2711 * entry. The Write index is not advanced until the
2712 * packet has been configured.
2714 * In between the W and R indexes are the TBDs that have NOT been
2715 * processed. Lagging behind the R index are packets that have
2716 * been processed but have not been freed by the driver.
2718 * In order to free old storage, an internal index will be maintained
2719 * that points to the next packet to be freed. When all used
2720 * packets have been freed, the oldest index will be the same as the
2721 * firmware's read index.
2723 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2725 * Because the TBD structure can not contain arbitrary data, the
2726 * driver must keep an internal queue of cached allocations such that
2727 * it can put that data back into the tx_free_list and msg_free_list
2728 * for use by future command and data packets.
2731 static int __ipw2100_tx_process(struct ipw2100_priv *priv)
2733 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2734 struct ipw2100_bd *tbd;
2735 struct list_head *element;
2736 struct ipw2100_tx_packet *packet;
2737 int descriptors_used;
2738 int e, i;
2739 u32 r, w, frag_num = 0;
2741 if (list_empty(&priv->fw_pend_list))
2742 return 0;
2744 element = priv->fw_pend_list.next;
2746 packet = list_entry(element, struct ipw2100_tx_packet, list);
2747 tbd = &txq->drv[packet->index];
2749 /* Determine how many TBD entries must be finished... */
2750 switch (packet->type) {
2751 case COMMAND:
2752 /* COMMAND uses only one slot; don't advance */
2753 descriptors_used = 1;
2754 e = txq->oldest;
2755 break;
2757 case DATA:
2758 /* DATA uses two slots; advance and loop position. */
2759 descriptors_used = tbd->num_fragments;
2760 frag_num = tbd->num_fragments - 1;
2761 e = txq->oldest + frag_num;
2762 e %= txq->entries;
2763 break;
2765 default:
2766 printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
2767 priv->net_dev->name);
2768 return 0;
2771 /* if the last TBD is not done by NIC yet, then packet is
2772 * not ready to be released.
2775 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
2776 &r);
2777 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2778 &w);
2779 if (w != txq->next)
2780 printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
2781 priv->net_dev->name);
2784 * txq->next is the index of the last packet written txq->oldest is
2785 * the index of the r is the index of the next packet to be read by
2786 * firmware
2790 * Quick graphic to help you visualize the following
2791 * if / else statement
2793 * ===>| s---->|===============
2794 * e>|
2795 * | a | b | c | d | e | f | g | h | i | j | k | l
2796 * r---->|
2799 * w - updated by driver
2800 * r - updated by firmware
2801 * s - start of oldest BD entry (txq->oldest)
2802 * e - end of oldest BD entry
2805 if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
2806 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2807 return 0;
2810 list_del(element);
2811 DEC_STAT(&priv->fw_pend_stat);
2813 #ifdef CONFIG_IPW2100_DEBUG
2815 int i = txq->oldest;
2816 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2817 &txq->drv[i],
2818 (u32) (txq->nic + i * sizeof(struct ipw2100_bd)),
2819 txq->drv[i].host_addr, txq->drv[i].buf_length);
2821 if (packet->type == DATA) {
2822 i = (i + 1) % txq->entries;
2824 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2825 &txq->drv[i],
2826 (u32) (txq->nic + i *
2827 sizeof(struct ipw2100_bd)),
2828 (u32) txq->drv[i].host_addr,
2829 txq->drv[i].buf_length);
2832 #endif
2834 switch (packet->type) {
2835 case DATA:
2836 if (txq->drv[txq->oldest].status.info.fields.txType != 0)
2837 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2838 "Expecting DATA TBD but pulled "
2839 "something else: ids %d=%d.\n",
2840 priv->net_dev->name, txq->oldest, packet->index);
2842 /* DATA packet; we have to unmap and free the SKB */
2843 for (i = 0; i < frag_num; i++) {
2844 tbd = &txq->drv[(packet->index + 1 + i) % txq->entries];
2846 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2847 (packet->index + 1 + i) % txq->entries,
2848 tbd->host_addr, tbd->buf_length);
2850 pci_unmap_single(priv->pci_dev,
2851 tbd->host_addr,
2852 tbd->buf_length, PCI_DMA_TODEVICE);
2855 ieee80211_txb_free(packet->info.d_struct.txb);
2856 packet->info.d_struct.txb = NULL;
2858 list_add_tail(element, &priv->tx_free_list);
2859 INC_STAT(&priv->tx_free_stat);
2861 /* We have a free slot in the Tx queue, so wake up the
2862 * transmit layer if it is stopped. */
2863 if (priv->status & STATUS_ASSOCIATED)
2864 netif_wake_queue(priv->net_dev);
2866 /* A packet was processed by the hardware, so update the
2867 * watchdog */
2868 priv->net_dev->trans_start = jiffies;
2870 break;
2872 case COMMAND:
2873 if (txq->drv[txq->oldest].status.info.fields.txType != 1)
2874 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2875 "Expecting COMMAND TBD but pulled "
2876 "something else: ids %d=%d.\n",
2877 priv->net_dev->name, txq->oldest, packet->index);
2879 #ifdef CONFIG_IPW2100_DEBUG
2880 if (packet->info.c_struct.cmd->host_command_reg <
2881 sizeof(command_types) / sizeof(*command_types))
2882 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2883 command_types[packet->info.c_struct.cmd->
2884 host_command_reg],
2885 packet->info.c_struct.cmd->
2886 host_command_reg,
2887 packet->info.c_struct.cmd->cmd_status_reg);
2888 #endif
2890 list_add_tail(element, &priv->msg_free_list);
2891 INC_STAT(&priv->msg_free_stat);
2892 break;
2895 /* advance oldest used TBD pointer to start of next entry */
2896 txq->oldest = (e + 1) % txq->entries;
2897 /* increase available TBDs number */
2898 txq->available += descriptors_used;
2899 SET_STAT(&priv->txq_stat, txq->available);
2901 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
2902 jiffies - packet->jiffy_start);
2904 return (!list_empty(&priv->fw_pend_list));
2907 static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
2909 int i = 0;
2911 while (__ipw2100_tx_process(priv) && i < 200)
2912 i++;
2914 if (i == 200) {
2915 printk(KERN_WARNING DRV_NAME ": "
2916 "%s: Driver is running slow (%d iters).\n",
2917 priv->net_dev->name, i);
2921 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
2923 struct list_head *element;
2924 struct ipw2100_tx_packet *packet;
2925 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2926 struct ipw2100_bd *tbd;
2927 int next = txq->next;
2929 while (!list_empty(&priv->msg_pend_list)) {
2930 /* if there isn't enough space in TBD queue, then
2931 * don't stuff a new one in.
2932 * NOTE: 3 are needed as a command will take one,
2933 * and there is a minimum of 2 that must be
2934 * maintained between the r and w indexes
2936 if (txq->available <= 3) {
2937 IPW_DEBUG_TX("no room in tx_queue\n");
2938 break;
2941 element = priv->msg_pend_list.next;
2942 list_del(element);
2943 DEC_STAT(&priv->msg_pend_stat);
2945 packet = list_entry(element, struct ipw2100_tx_packet, list);
2947 IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
2948 &txq->drv[txq->next],
2949 (void *)(txq->nic + txq->next *
2950 sizeof(struct ipw2100_bd)));
2952 packet->index = txq->next;
2954 tbd = &txq->drv[txq->next];
2956 /* initialize TBD */
2957 tbd->host_addr = packet->info.c_struct.cmd_phys;
2958 tbd->buf_length = sizeof(struct ipw2100_cmd_header);
2959 /* not marking number of fragments causes problems
2960 * with f/w debug version */
2961 tbd->num_fragments = 1;
2962 tbd->status.info.field =
2963 IPW_BD_STATUS_TX_FRAME_COMMAND |
2964 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
2966 /* update TBD queue counters */
2967 txq->next++;
2968 txq->next %= txq->entries;
2969 txq->available--;
2970 DEC_STAT(&priv->txq_stat);
2972 list_add_tail(element, &priv->fw_pend_list);
2973 INC_STAT(&priv->fw_pend_stat);
2976 if (txq->next != next) {
2977 /* kick off the DMA by notifying firmware the
2978 * write index has moved; make sure TBD stores are sync'd */
2979 wmb();
2980 write_register(priv->net_dev,
2981 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2982 txq->next);
2987 * ipw2100_tx_send_data
2990 static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
2992 struct list_head *element;
2993 struct ipw2100_tx_packet *packet;
2994 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2995 struct ipw2100_bd *tbd;
2996 int next = txq->next;
2997 int i = 0;
2998 struct ipw2100_data_header *ipw_hdr;
2999 struct ieee80211_hdr_3addr *hdr;
3001 while (!list_empty(&priv->tx_pend_list)) {
3002 /* if there isn't enough space in TBD queue, then
3003 * don't stuff a new one in.
3004 * NOTE: 4 are needed as a data will take two,
3005 * and there is a minimum of 2 that must be
3006 * maintained between the r and w indexes
3008 element = priv->tx_pend_list.next;
3009 packet = list_entry(element, struct ipw2100_tx_packet, list);
3011 if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
3012 IPW_MAX_BDS)) {
3013 /* TODO: Support merging buffers if more than
3014 * IPW_MAX_BDS are used */
3015 IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. "
3016 "Increase fragmentation level.\n",
3017 priv->net_dev->name);
3020 if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) {
3021 IPW_DEBUG_TX("no room in tx_queue\n");
3022 break;
3025 list_del(element);
3026 DEC_STAT(&priv->tx_pend_stat);
3028 tbd = &txq->drv[txq->next];
3030 packet->index = txq->next;
3032 ipw_hdr = packet->info.d_struct.data;
3033 hdr = (struct ieee80211_hdr_3addr *)packet->info.d_struct.txb->
3034 fragments[0]->data;
3036 if (priv->ieee->iw_mode == IW_MODE_INFRA) {
3037 /* To DS: Addr1 = BSSID, Addr2 = SA,
3038 Addr3 = DA */
3039 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3040 memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
3041 } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
3042 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3043 Addr3 = BSSID */
3044 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3045 memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
3048 ipw_hdr->host_command_reg = SEND;
3049 ipw_hdr->host_command_reg1 = 0;
3051 /* For now we only support host based encryption */
3052 ipw_hdr->needs_encryption = 0;
3053 ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
3054 if (packet->info.d_struct.txb->nr_frags > 1)
3055 ipw_hdr->fragment_size =
3056 packet->info.d_struct.txb->frag_size -
3057 IEEE80211_3ADDR_LEN;
3058 else
3059 ipw_hdr->fragment_size = 0;
3061 tbd->host_addr = packet->info.d_struct.data_phys;
3062 tbd->buf_length = sizeof(struct ipw2100_data_header);
3063 tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
3064 tbd->status.info.field =
3065 IPW_BD_STATUS_TX_FRAME_802_3 |
3066 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3067 txq->next++;
3068 txq->next %= txq->entries;
3070 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3071 packet->index, tbd->host_addr, tbd->buf_length);
3072 #ifdef CONFIG_IPW2100_DEBUG
3073 if (packet->info.d_struct.txb->nr_frags > 1)
3074 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3075 packet->info.d_struct.txb->nr_frags);
3076 #endif
3078 for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
3079 tbd = &txq->drv[txq->next];
3080 if (i == packet->info.d_struct.txb->nr_frags - 1)
3081 tbd->status.info.field =
3082 IPW_BD_STATUS_TX_FRAME_802_3 |
3083 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3084 else
3085 tbd->status.info.field =
3086 IPW_BD_STATUS_TX_FRAME_802_3 |
3087 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3089 tbd->buf_length = packet->info.d_struct.txb->
3090 fragments[i]->len - IEEE80211_3ADDR_LEN;
3092 tbd->host_addr = pci_map_single(priv->pci_dev,
3093 packet->info.d_struct.
3094 txb->fragments[i]->
3095 data +
3096 IEEE80211_3ADDR_LEN,
3097 tbd->buf_length,
3098 PCI_DMA_TODEVICE);
3100 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3101 txq->next, tbd->host_addr,
3102 tbd->buf_length);
3104 pci_dma_sync_single_for_device(priv->pci_dev,
3105 tbd->host_addr,
3106 tbd->buf_length,
3107 PCI_DMA_TODEVICE);
3109 txq->next++;
3110 txq->next %= txq->entries;
3113 txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
3114 SET_STAT(&priv->txq_stat, txq->available);
3116 list_add_tail(element, &priv->fw_pend_list);
3117 INC_STAT(&priv->fw_pend_stat);
3120 if (txq->next != next) {
3121 /* kick off the DMA by notifying firmware the
3122 * write index has moved; make sure TBD stores are sync'd */
3123 write_register(priv->net_dev,
3124 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3125 txq->next);
3127 return;
3130 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
3132 struct net_device *dev = priv->net_dev;
3133 unsigned long flags;
3134 u32 inta, tmp;
3136 spin_lock_irqsave(&priv->low_lock, flags);
3137 ipw2100_disable_interrupts(priv);
3139 read_register(dev, IPW_REG_INTA, &inta);
3141 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3142 (unsigned long)inta & IPW_INTERRUPT_MASK);
3144 priv->in_isr++;
3145 priv->interrupts++;
3147 /* We do not loop and keep polling for more interrupts as this
3148 * is frowned upon and doesn't play nicely with other potentially
3149 * chained IRQs */
3150 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3151 (unsigned long)inta & IPW_INTERRUPT_MASK);
3153 if (inta & IPW2100_INTA_FATAL_ERROR) {
3154 printk(KERN_WARNING DRV_NAME
3155 ": Fatal interrupt. Scheduling firmware restart.\n");
3156 priv->inta_other++;
3157 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR);
3159 read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
3160 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3161 priv->net_dev->name, priv->fatal_error);
3163 read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
3164 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3165 priv->net_dev->name, tmp);
3167 /* Wake up any sleeping jobs */
3168 schedule_reset(priv);
3171 if (inta & IPW2100_INTA_PARITY_ERROR) {
3172 printk(KERN_ERR DRV_NAME
3173 ": ***** PARITY ERROR INTERRUPT !!!! \n");
3174 priv->inta_other++;
3175 write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR);
3178 if (inta & IPW2100_INTA_RX_TRANSFER) {
3179 IPW_DEBUG_ISR("RX interrupt\n");
3181 priv->rx_interrupts++;
3183 write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER);
3185 __ipw2100_rx_process(priv);
3186 __ipw2100_tx_complete(priv);
3189 if (inta & IPW2100_INTA_TX_TRANSFER) {
3190 IPW_DEBUG_ISR("TX interrupt\n");
3192 priv->tx_interrupts++;
3194 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER);
3196 __ipw2100_tx_complete(priv);
3197 ipw2100_tx_send_commands(priv);
3198 ipw2100_tx_send_data(priv);
3201 if (inta & IPW2100_INTA_TX_COMPLETE) {
3202 IPW_DEBUG_ISR("TX complete\n");
3203 priv->inta_other++;
3204 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE);
3206 __ipw2100_tx_complete(priv);
3209 if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
3210 /* ipw2100_handle_event(dev); */
3211 priv->inta_other++;
3212 write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT);
3215 if (inta & IPW2100_INTA_FW_INIT_DONE) {
3216 IPW_DEBUG_ISR("FW init done interrupt\n");
3217 priv->inta_other++;
3219 read_register(dev, IPW_REG_INTA, &tmp);
3220 if (tmp & (IPW2100_INTA_FATAL_ERROR |
3221 IPW2100_INTA_PARITY_ERROR)) {
3222 write_register(dev, IPW_REG_INTA,
3223 IPW2100_INTA_FATAL_ERROR |
3224 IPW2100_INTA_PARITY_ERROR);
3227 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE);
3230 if (inta & IPW2100_INTA_STATUS_CHANGE) {
3231 IPW_DEBUG_ISR("Status change interrupt\n");
3232 priv->inta_other++;
3233 write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE);
3236 if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
3237 IPW_DEBUG_ISR("slave host mode interrupt\n");
3238 priv->inta_other++;
3239 write_register(dev, IPW_REG_INTA,
3240 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
3243 priv->in_isr--;
3244 ipw2100_enable_interrupts(priv);
3246 spin_unlock_irqrestore(&priv->low_lock, flags);
3248 IPW_DEBUG_ISR("exit\n");
3251 static irqreturn_t ipw2100_interrupt(int irq, void *data, struct pt_regs *regs)
3253 struct ipw2100_priv *priv = data;
3254 u32 inta, inta_mask;
3256 if (!data)
3257 return IRQ_NONE;
3259 spin_lock(&priv->low_lock);
3261 /* We check to see if we should be ignoring interrupts before
3262 * we touch the hardware. During ucode load if we try and handle
3263 * an interrupt we can cause keyboard problems as well as cause
3264 * the ucode to fail to initialize */
3265 if (!(priv->status & STATUS_INT_ENABLED)) {
3266 /* Shared IRQ */
3267 goto none;
3270 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
3271 read_register(priv->net_dev, IPW_REG_INTA, &inta);
3273 if (inta == 0xFFFFFFFF) {
3274 /* Hardware disappeared */
3275 printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
3276 goto none;
3279 inta &= IPW_INTERRUPT_MASK;
3281 if (!(inta & inta_mask)) {
3282 /* Shared interrupt */
3283 goto none;
3286 /* We disable the hardware interrupt here just to prevent unneeded
3287 * calls to be made. We disable this again within the actual
3288 * work tasklet, so if another part of the code re-enables the
3289 * interrupt, that is fine */
3290 ipw2100_disable_interrupts(priv);
3292 tasklet_schedule(&priv->irq_tasklet);
3293 spin_unlock(&priv->low_lock);
3295 return IRQ_HANDLED;
3296 none:
3297 spin_unlock(&priv->low_lock);
3298 return IRQ_NONE;
3301 static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev,
3302 int pri)
3304 struct ipw2100_priv *priv = ieee80211_priv(dev);
3305 struct list_head *element;
3306 struct ipw2100_tx_packet *packet;
3307 unsigned long flags;
3309 spin_lock_irqsave(&priv->low_lock, flags);
3311 if (!(priv->status & STATUS_ASSOCIATED)) {
3312 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3313 priv->ieee->stats.tx_carrier_errors++;
3314 netif_stop_queue(dev);
3315 goto fail_unlock;
3318 if (list_empty(&priv->tx_free_list))
3319 goto fail_unlock;
3321 element = priv->tx_free_list.next;
3322 packet = list_entry(element, struct ipw2100_tx_packet, list);
3324 packet->info.d_struct.txb = txb;
3326 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len);
3327 printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len);
3329 packet->jiffy_start = jiffies;
3331 list_del(element);
3332 DEC_STAT(&priv->tx_free_stat);
3334 list_add_tail(element, &priv->tx_pend_list);
3335 INC_STAT(&priv->tx_pend_stat);
3337 ipw2100_tx_send_data(priv);
3339 spin_unlock_irqrestore(&priv->low_lock, flags);
3340 return 0;
3342 fail_unlock:
3343 netif_stop_queue(dev);
3344 spin_unlock_irqrestore(&priv->low_lock, flags);
3345 return 1;
3348 static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
3350 int i, j, err = -EINVAL;
3351 void *v;
3352 dma_addr_t p;
3354 priv->msg_buffers =
3355 (struct ipw2100_tx_packet *)kmalloc(IPW_COMMAND_POOL_SIZE *
3356 sizeof(struct
3357 ipw2100_tx_packet),
3358 GFP_KERNEL);
3359 if (!priv->msg_buffers) {
3360 printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg "
3361 "buffers.\n", priv->net_dev->name);
3362 return -ENOMEM;
3365 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3366 v = pci_alloc_consistent(priv->pci_dev,
3367 sizeof(struct ipw2100_cmd_header), &p);
3368 if (!v) {
3369 printk(KERN_ERR DRV_NAME ": "
3370 "%s: PCI alloc failed for msg "
3371 "buffers.\n", priv->net_dev->name);
3372 err = -ENOMEM;
3373 break;
3376 memset(v, 0, sizeof(struct ipw2100_cmd_header));
3378 priv->msg_buffers[i].type = COMMAND;
3379 priv->msg_buffers[i].info.c_struct.cmd =
3380 (struct ipw2100_cmd_header *)v;
3381 priv->msg_buffers[i].info.c_struct.cmd_phys = p;
3384 if (i == IPW_COMMAND_POOL_SIZE)
3385 return 0;
3387 for (j = 0; j < i; j++) {
3388 pci_free_consistent(priv->pci_dev,
3389 sizeof(struct ipw2100_cmd_header),
3390 priv->msg_buffers[j].info.c_struct.cmd,
3391 priv->msg_buffers[j].info.c_struct.
3392 cmd_phys);
3395 kfree(priv->msg_buffers);
3396 priv->msg_buffers = NULL;
3398 return err;
3401 static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
3403 int i;
3405 INIT_LIST_HEAD(&priv->msg_free_list);
3406 INIT_LIST_HEAD(&priv->msg_pend_list);
3408 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
3409 list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
3410 SET_STAT(&priv->msg_free_stat, i);
3412 return 0;
3415 static void ipw2100_msg_free(struct ipw2100_priv *priv)
3417 int i;
3419 if (!priv->msg_buffers)
3420 return;
3422 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3423 pci_free_consistent(priv->pci_dev,
3424 sizeof(struct ipw2100_cmd_header),
3425 priv->msg_buffers[i].info.c_struct.cmd,
3426 priv->msg_buffers[i].info.c_struct.
3427 cmd_phys);
3430 kfree(priv->msg_buffers);
3431 priv->msg_buffers = NULL;
3434 static ssize_t show_pci(struct device *d, struct device_attribute *attr,
3435 char *buf)
3437 struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
3438 char *out = buf;
3439 int i, j;
3440 u32 val;
3442 for (i = 0; i < 16; i++) {
3443 out += sprintf(out, "[%08X] ", i * 16);
3444 for (j = 0; j < 16; j += 4) {
3445 pci_read_config_dword(pci_dev, i * 16 + j, &val);
3446 out += sprintf(out, "%08X ", val);
3448 out += sprintf(out, "\n");
3451 return out - buf;
3454 static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
3456 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
3457 char *buf)
3459 struct ipw2100_priv *p = d->driver_data;
3460 return sprintf(buf, "0x%08x\n", (int)p->config);
3463 static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
3465 static ssize_t show_status(struct device *d, struct device_attribute *attr,
3466 char *buf)
3468 struct ipw2100_priv *p = d->driver_data;
3469 return sprintf(buf, "0x%08x\n", (int)p->status);
3472 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
3474 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
3475 char *buf)
3477 struct ipw2100_priv *p = d->driver_data;
3478 return sprintf(buf, "0x%08x\n", (int)p->capability);
3481 static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
3483 #define IPW2100_REG(x) { IPW_ ##x, #x }
3484 static const struct {
3485 u32 addr;
3486 const char *name;
3487 } hw_data[] = {
3488 IPW2100_REG(REG_GP_CNTRL),
3489 IPW2100_REG(REG_GPIO),
3490 IPW2100_REG(REG_INTA),
3491 IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),};
3492 #define IPW2100_NIC(x, s) { x, #x, s }
3493 static const struct {
3494 u32 addr;
3495 const char *name;
3496 size_t size;
3497 } nic_data[] = {
3498 IPW2100_NIC(IPW2100_CONTROL_REG, 2),
3499 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3500 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3501 static const struct {
3502 u8 index;
3503 const char *name;
3504 const char *desc;
3505 } ord_data[] = {
3506 IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
3507 IPW2100_ORD(STAT_TX_HOST_COMPLETE,
3508 "successful Host Tx's (MSDU)"),
3509 IPW2100_ORD(STAT_TX_DIR_DATA,
3510 "successful Directed Tx's (MSDU)"),
3511 IPW2100_ORD(STAT_TX_DIR_DATA1,
3512 "successful Directed Tx's (MSDU) @ 1MB"),
3513 IPW2100_ORD(STAT_TX_DIR_DATA2,
3514 "successful Directed Tx's (MSDU) @ 2MB"),
3515 IPW2100_ORD(STAT_TX_DIR_DATA5_5,
3516 "successful Directed Tx's (MSDU) @ 5_5MB"),
3517 IPW2100_ORD(STAT_TX_DIR_DATA11,
3518 "successful Directed Tx's (MSDU) @ 11MB"),
3519 IPW2100_ORD(STAT_TX_NODIR_DATA1,
3520 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3521 IPW2100_ORD(STAT_TX_NODIR_DATA2,
3522 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3523 IPW2100_ORD(STAT_TX_NODIR_DATA5_5,
3524 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3525 IPW2100_ORD(STAT_TX_NODIR_DATA11,
3526 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3527 IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
3528 IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
3529 IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
3530 IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
3531 IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
3532 IPW2100_ORD(STAT_TX_ASSN_RESP,
3533 "successful Association response Tx's"),
3534 IPW2100_ORD(STAT_TX_REASSN,
3535 "successful Reassociation Tx's"),
3536 IPW2100_ORD(STAT_TX_REASSN_RESP,
3537 "successful Reassociation response Tx's"),
3538 IPW2100_ORD(STAT_TX_PROBE,
3539 "probes successfully transmitted"),
3540 IPW2100_ORD(STAT_TX_PROBE_RESP,
3541 "probe responses successfully transmitted"),
3542 IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
3543 IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
3544 IPW2100_ORD(STAT_TX_DISASSN,
3545 "successful Disassociation TX"),
3546 IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
3547 IPW2100_ORD(STAT_TX_DEAUTH,
3548 "successful Deauthentication TX"),
3549 IPW2100_ORD(STAT_TX_TOTAL_BYTES,
3550 "Total successful Tx data bytes"),
3551 IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
3552 IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
3553 IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
3554 IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
3555 IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
3556 IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
3557 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,
3558 "times max tries in a hop failed"),
3559 IPW2100_ORD(STAT_TX_DISASSN_FAIL,
3560 "times disassociation failed"),
3561 IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
3562 IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
3563 IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
3564 IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
3565 IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
3566 IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
3567 IPW2100_ORD(STAT_RX_DIR_DATA5_5,
3568 "directed packets at 5.5MB"),
3569 IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
3570 IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"),
3571 IPW2100_ORD(STAT_RX_NODIR_DATA1,
3572 "nondirected packets at 1MB"),
3573 IPW2100_ORD(STAT_RX_NODIR_DATA2,
3574 "nondirected packets at 2MB"),
3575 IPW2100_ORD(STAT_RX_NODIR_DATA5_5,
3576 "nondirected packets at 5.5MB"),
3577 IPW2100_ORD(STAT_RX_NODIR_DATA11,
3578 "nondirected packets at 11MB"),
3579 IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
3580 IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS,
3581 "Rx CTS"),
3582 IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
3583 IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
3584 IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
3585 IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
3586 IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
3587 IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
3588 IPW2100_ORD(STAT_RX_REASSN_RESP,
3589 "Reassociation response Rx's"),
3590 IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
3591 IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
3592 IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
3593 IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
3594 IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
3595 IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
3596 IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
3597 IPW2100_ORD(STAT_RX_TOTAL_BYTES,
3598 "Total rx data bytes received"),
3599 IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
3600 IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
3601 IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
3602 IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
3603 IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
3604 IPW2100_ORD(STAT_RX_DUPLICATE1,
3605 "duplicate rx packets at 1MB"),
3606 IPW2100_ORD(STAT_RX_DUPLICATE2,
3607 "duplicate rx packets at 2MB"),
3608 IPW2100_ORD(STAT_RX_DUPLICATE5_5,
3609 "duplicate rx packets at 5.5MB"),
3610 IPW2100_ORD(STAT_RX_DUPLICATE11,
3611 "duplicate rx packets at 11MB"),
3612 IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
3613 IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
3614 IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
3615 IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
3616 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL,
3617 "rx frames with invalid protocol"),
3618 IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
3619 IPW2100_ORD(STAT_RX_NO_BUFFER,
3620 "rx frames rejected due to no buffer"),
3621 IPW2100_ORD(STAT_RX_MISSING_FRAG,
3622 "rx frames dropped due to missing fragment"),
3623 IPW2100_ORD(STAT_RX_ORPHAN_FRAG,
3624 "rx frames dropped due to non-sequential fragment"),
3625 IPW2100_ORD(STAT_RX_ORPHAN_FRAME,
3626 "rx frames dropped due to unmatched 1st frame"),
3627 IPW2100_ORD(STAT_RX_FRAG_AGEOUT,
3628 "rx frames dropped due to uncompleted frame"),
3629 IPW2100_ORD(STAT_RX_ICV_ERRORS,
3630 "ICV errors during decryption"),
3631 IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"),
3632 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
3633 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT,
3634 "poll response timeouts"),
3635 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT,
3636 "timeouts waiting for last {broad,multi}cast pkt"),
3637 IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
3638 IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
3639 IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"),
3640 IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
3641 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,
3642 "current calculation of % missed beacons"),
3643 IPW2100_ORD(STAT_PERCENT_RETRIES,
3644 "current calculation of % missed tx retries"),
3645 IPW2100_ORD(ASSOCIATED_AP_PTR,
3646 "0 if not associated, else pointer to AP table entry"),
3647 IPW2100_ORD(AVAILABLE_AP_CNT,
3648 "AP's decsribed in the AP table"),
3649 IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
3650 IPW2100_ORD(STAT_AP_ASSNS, "associations"),
3651 IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
3652 IPW2100_ORD(STAT_ASSN_RESP_FAIL,
3653 "failures due to response fail"),
3654 IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
3655 IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
3656 IPW2100_ORD(STAT_ROAM_INHIBIT,
3657 "times roaming was inhibited due to activity"),
3658 IPW2100_ORD(RSSI_AT_ASSN,
3659 "RSSI of associated AP at time of association"),
3660 IPW2100_ORD(STAT_ASSN_CAUSE1,
3661 "reassociation: no probe response or TX on hop"),
3662 IPW2100_ORD(STAT_ASSN_CAUSE2,
3663 "reassociation: poor tx/rx quality"),
3664 IPW2100_ORD(STAT_ASSN_CAUSE3,
3665 "reassociation: tx/rx quality (excessive AP load"),
3666 IPW2100_ORD(STAT_ASSN_CAUSE4,
3667 "reassociation: AP RSSI level"),
3668 IPW2100_ORD(STAT_ASSN_CAUSE5,
3669 "reassociations due to load leveling"),
3670 IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
3671 IPW2100_ORD(STAT_AUTH_RESP_FAIL,
3672 "times authentication response failed"),
3673 IPW2100_ORD(STATION_TABLE_CNT,
3674 "entries in association table"),
3675 IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
3676 IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
3677 IPW2100_ORD(COUNTRY_CODE,
3678 "IEEE country code as recv'd from beacon"),
3679 IPW2100_ORD(COUNTRY_CHANNELS,
3680 "channels suported by country"),
3681 IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
3682 IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
3683 IPW2100_ORD(ANTENNA_DIVERSITY,
3684 "TRUE if antenna diversity is disabled"),
3685 IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
3686 IPW2100_ORD(OUR_FREQ,
3687 "current radio freq lower digits - channel ID"),
3688 IPW2100_ORD(RTC_TIME, "current RTC time"),
3689 IPW2100_ORD(PORT_TYPE, "operating mode"),
3690 IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
3691 IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
3692 IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
3693 IPW2100_ORD(BASIC_RATES, "basic tx rates"),
3694 IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
3695 IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
3696 IPW2100_ORD(CAPABILITIES,
3697 "Management frame capability field"),
3698 IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
3699 IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
3700 IPW2100_ORD(RTS_THRESHOLD,
3701 "Min packet length for RTS handshaking"),
3702 IPW2100_ORD(INT_MODE, "International mode"),
3703 IPW2100_ORD(FRAGMENTATION_THRESHOLD,
3704 "protocol frag threshold"),
3705 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
3706 "EEPROM offset in SRAM"),
3707 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE,
3708 "EEPROM size in SRAM"),
3709 IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
3710 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS,
3711 "EEPROM IBSS 11b channel set"),
3712 IPW2100_ORD(MAC_VERSION, "MAC Version"),
3713 IPW2100_ORD(MAC_REVISION, "MAC Revision"),
3714 IPW2100_ORD(RADIO_VERSION, "Radio Version"),
3715 IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
3716 IPW2100_ORD(UCODE_VERSION, "Ucode Version"),};
3718 static ssize_t show_registers(struct device *d, struct device_attribute *attr,
3719 char *buf)
3721 int i;
3722 struct ipw2100_priv *priv = dev_get_drvdata(d);
3723 struct net_device *dev = priv->net_dev;
3724 char *out = buf;
3725 u32 val = 0;
3727 out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
3729 for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) {
3730 read_register(dev, hw_data[i].addr, &val);
3731 out += sprintf(out, "%30s [%08X] : %08X\n",
3732 hw_data[i].name, hw_data[i].addr, val);
3735 return out - buf;
3738 static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
3740 static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
3741 char *buf)
3743 struct ipw2100_priv *priv = dev_get_drvdata(d);
3744 struct net_device *dev = priv->net_dev;
3745 char *out = buf;
3746 int i;
3748 out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
3750 for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) {
3751 u8 tmp8;
3752 u16 tmp16;
3753 u32 tmp32;
3755 switch (nic_data[i].size) {
3756 case 1:
3757 read_nic_byte(dev, nic_data[i].addr, &tmp8);
3758 out += sprintf(out, "%30s [%08X] : %02X\n",
3759 nic_data[i].name, nic_data[i].addr,
3760 tmp8);
3761 break;
3762 case 2:
3763 read_nic_word(dev, nic_data[i].addr, &tmp16);
3764 out += sprintf(out, "%30s [%08X] : %04X\n",
3765 nic_data[i].name, nic_data[i].addr,
3766 tmp16);
3767 break;
3768 case 4:
3769 read_nic_dword(dev, nic_data[i].addr, &tmp32);
3770 out += sprintf(out, "%30s [%08X] : %08X\n",
3771 nic_data[i].name, nic_data[i].addr,
3772 tmp32);
3773 break;
3776 return out - buf;
3779 static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
3781 static ssize_t show_memory(struct device *d, struct device_attribute *attr,
3782 char *buf)
3784 struct ipw2100_priv *priv = dev_get_drvdata(d);
3785 struct net_device *dev = priv->net_dev;
3786 static unsigned long loop = 0;
3787 int len = 0;
3788 u32 buffer[4];
3789 int i;
3790 char line[81];
3792 if (loop >= 0x30000)
3793 loop = 0;
3795 /* sysfs provides us PAGE_SIZE buffer */
3796 while (len < PAGE_SIZE - 128 && loop < 0x30000) {
3798 if (priv->snapshot[0])
3799 for (i = 0; i < 4; i++)
3800 buffer[i] =
3801 *(u32 *) SNAPSHOT_ADDR(loop + i * 4);
3802 else
3803 for (i = 0; i < 4; i++)
3804 read_nic_dword(dev, loop + i * 4, &buffer[i]);
3806 if (priv->dump_raw)
3807 len += sprintf(buf + len,
3808 "%c%c%c%c"
3809 "%c%c%c%c"
3810 "%c%c%c%c"
3811 "%c%c%c%c",
3812 ((u8 *) buffer)[0x0],
3813 ((u8 *) buffer)[0x1],
3814 ((u8 *) buffer)[0x2],
3815 ((u8 *) buffer)[0x3],
3816 ((u8 *) buffer)[0x4],
3817 ((u8 *) buffer)[0x5],
3818 ((u8 *) buffer)[0x6],
3819 ((u8 *) buffer)[0x7],
3820 ((u8 *) buffer)[0x8],
3821 ((u8 *) buffer)[0x9],
3822 ((u8 *) buffer)[0xa],
3823 ((u8 *) buffer)[0xb],
3824 ((u8 *) buffer)[0xc],
3825 ((u8 *) buffer)[0xd],
3826 ((u8 *) buffer)[0xe],
3827 ((u8 *) buffer)[0xf]);
3828 else
3829 len += sprintf(buf + len, "%s\n",
3830 snprint_line(line, sizeof(line),
3831 (u8 *) buffer, 16, loop));
3832 loop += 16;
3835 return len;
3838 static ssize_t store_memory(struct device *d, struct device_attribute *attr,
3839 const char *buf, size_t count)
3841 struct ipw2100_priv *priv = dev_get_drvdata(d);
3842 struct net_device *dev = priv->net_dev;
3843 const char *p = buf;
3845 (void)dev; /* kill unused-var warning for debug-only code */
3847 if (count < 1)
3848 return count;
3850 if (p[0] == '1' ||
3851 (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
3852 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3853 dev->name);
3854 priv->dump_raw = 1;
3856 } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
3857 tolower(p[1]) == 'f')) {
3858 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3859 dev->name);
3860 priv->dump_raw = 0;
3862 } else if (tolower(p[0]) == 'r') {
3863 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name);
3864 ipw2100_snapshot_free(priv);
3866 } else
3867 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3868 "reset = clear memory snapshot\n", dev->name);
3870 return count;
3873 static DEVICE_ATTR(memory, S_IWUSR | S_IRUGO, show_memory, store_memory);
3875 static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
3876 char *buf)
3878 struct ipw2100_priv *priv = dev_get_drvdata(d);
3879 u32 val = 0;
3880 int len = 0;
3881 u32 val_len;
3882 static int loop = 0;
3884 if (priv->status & STATUS_RF_KILL_MASK)
3885 return 0;
3887 if (loop >= sizeof(ord_data) / sizeof(*ord_data))
3888 loop = 0;
3890 /* sysfs provides us PAGE_SIZE buffer */
3891 while (len < PAGE_SIZE - 128 &&
3892 loop < (sizeof(ord_data) / sizeof(*ord_data))) {
3894 val_len = sizeof(u32);
3896 if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
3897 &val_len))
3898 len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
3899 ord_data[loop].index,
3900 ord_data[loop].desc);
3901 else
3902 len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
3903 ord_data[loop].index, val,
3904 ord_data[loop].desc);
3905 loop++;
3908 return len;
3911 static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
3913 static ssize_t show_stats(struct device *d, struct device_attribute *attr,
3914 char *buf)
3916 struct ipw2100_priv *priv = dev_get_drvdata(d);
3917 char *out = buf;
3919 out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
3920 priv->interrupts, priv->tx_interrupts,
3921 priv->rx_interrupts, priv->inta_other);
3922 out += sprintf(out, "firmware resets: %d\n", priv->resets);
3923 out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
3924 #ifdef CONFIG_IPW2100_DEBUG
3925 out += sprintf(out, "packet mismatch image: %s\n",
3926 priv->snapshot[0] ? "YES" : "NO");
3927 #endif
3929 return out - buf;
3932 static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
3934 static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
3936 int err;
3938 if (mode == priv->ieee->iw_mode)
3939 return 0;
3941 err = ipw2100_disable_adapter(priv);
3942 if (err) {
3943 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
3944 priv->net_dev->name, err);
3945 return err;
3948 switch (mode) {
3949 case IW_MODE_INFRA:
3950 priv->net_dev->type = ARPHRD_ETHER;
3951 break;
3952 case IW_MODE_ADHOC:
3953 priv->net_dev->type = ARPHRD_ETHER;
3954 break;
3955 #ifdef CONFIG_IPW2100_MONITOR
3956 case IW_MODE_MONITOR:
3957 priv->last_mode = priv->ieee->iw_mode;
3958 priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
3959 break;
3960 #endif /* CONFIG_IPW2100_MONITOR */
3963 priv->ieee->iw_mode = mode;
3965 #ifdef CONFIG_PM
3966 /* Indicate ipw2100_download_firmware download firmware
3967 * from disk instead of memory. */
3968 ipw2100_firmware.version = 0;
3969 #endif
3971 printk(KERN_INFO "%s: Reseting on mode change.\n", priv->net_dev->name);
3972 priv->reset_backoff = 0;
3973 schedule_reset(priv);
3975 return 0;
3978 static ssize_t show_internals(struct device *d, struct device_attribute *attr,
3979 char *buf)
3981 struct ipw2100_priv *priv = dev_get_drvdata(d);
3982 int len = 0;
3984 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
3986 if (priv->status & STATUS_ASSOCIATED)
3987 len += sprintf(buf + len, "connected: %lu\n",
3988 get_seconds() - priv->connect_start);
3989 else
3990 len += sprintf(buf + len, "not connected\n");
3992 DUMP_VAR(ieee->crypt[priv->ieee->tx_keyidx], "p");
3993 DUMP_VAR(status, "08lx");
3994 DUMP_VAR(config, "08lx");
3995 DUMP_VAR(capability, "08lx");
3997 len +=
3998 sprintf(buf + len, "last_rtc: %lu\n",
3999 (unsigned long)priv->last_rtc);
4001 DUMP_VAR(fatal_error, "d");
4002 DUMP_VAR(stop_hang_check, "d");
4003 DUMP_VAR(stop_rf_kill, "d");
4004 DUMP_VAR(messages_sent, "d");
4006 DUMP_VAR(tx_pend_stat.value, "d");
4007 DUMP_VAR(tx_pend_stat.hi, "d");
4009 DUMP_VAR(tx_free_stat.value, "d");
4010 DUMP_VAR(tx_free_stat.lo, "d");
4012 DUMP_VAR(msg_free_stat.value, "d");
4013 DUMP_VAR(msg_free_stat.lo, "d");
4015 DUMP_VAR(msg_pend_stat.value, "d");
4016 DUMP_VAR(msg_pend_stat.hi, "d");
4018 DUMP_VAR(fw_pend_stat.value, "d");
4019 DUMP_VAR(fw_pend_stat.hi, "d");
4021 DUMP_VAR(txq_stat.value, "d");
4022 DUMP_VAR(txq_stat.lo, "d");
4024 DUMP_VAR(ieee->scans, "d");
4025 DUMP_VAR(reset_backoff, "d");
4027 return len;
4030 static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
4032 static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
4033 char *buf)
4035 struct ipw2100_priv *priv = dev_get_drvdata(d);
4036 char essid[IW_ESSID_MAX_SIZE + 1];
4037 u8 bssid[ETH_ALEN];
4038 u32 chan = 0;
4039 char *out = buf;
4040 int length;
4041 int ret;
4043 if (priv->status & STATUS_RF_KILL_MASK)
4044 return 0;
4046 memset(essid, 0, sizeof(essid));
4047 memset(bssid, 0, sizeof(bssid));
4049 length = IW_ESSID_MAX_SIZE;
4050 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
4051 if (ret)
4052 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4053 __LINE__);
4055 length = sizeof(bssid);
4056 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
4057 bssid, &length);
4058 if (ret)
4059 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4060 __LINE__);
4062 length = sizeof(u32);
4063 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
4064 if (ret)
4065 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4066 __LINE__);
4068 out += sprintf(out, "ESSID: %s\n", essid);
4069 out += sprintf(out, "BSSID: %02x:%02x:%02x:%02x:%02x:%02x\n",
4070 bssid[0], bssid[1], bssid[2],
4071 bssid[3], bssid[4], bssid[5]);
4072 out += sprintf(out, "Channel: %d\n", chan);
4074 return out - buf;
4077 static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
4079 #ifdef CONFIG_IPW2100_DEBUG
4080 static ssize_t show_debug_level(struct device_driver *d, char *buf)
4082 return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
4085 static ssize_t store_debug_level(struct device_driver *d,
4086 const char *buf, size_t count)
4088 char *p = (char *)buf;
4089 u32 val;
4091 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4092 p++;
4093 if (p[0] == 'x' || p[0] == 'X')
4094 p++;
4095 val = simple_strtoul(p, &p, 16);
4096 } else
4097 val = simple_strtoul(p, &p, 10);
4098 if (p == buf)
4099 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf);
4100 else
4101 ipw2100_debug_level = val;
4103 return strnlen(buf, count);
4106 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
4107 store_debug_level);
4108 #endif /* CONFIG_IPW2100_DEBUG */
4110 static ssize_t show_fatal_error(struct device *d,
4111 struct device_attribute *attr, char *buf)
4113 struct ipw2100_priv *priv = dev_get_drvdata(d);
4114 char *out = buf;
4115 int i;
4117 if (priv->fatal_error)
4118 out += sprintf(out, "0x%08X\n", priv->fatal_error);
4119 else
4120 out += sprintf(out, "0\n");
4122 for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
4123 if (!priv->fatal_errors[(priv->fatal_index - i) %
4124 IPW2100_ERROR_QUEUE])
4125 continue;
4127 out += sprintf(out, "%d. 0x%08X\n", i,
4128 priv->fatal_errors[(priv->fatal_index - i) %
4129 IPW2100_ERROR_QUEUE]);
4132 return out - buf;
4135 static ssize_t store_fatal_error(struct device *d,
4136 struct device_attribute *attr, const char *buf,
4137 size_t count)
4139 struct ipw2100_priv *priv = dev_get_drvdata(d);
4140 schedule_reset(priv);
4141 return count;
4144 static DEVICE_ATTR(fatal_error, S_IWUSR | S_IRUGO, show_fatal_error,
4145 store_fatal_error);
4147 static ssize_t show_scan_age(struct device *d, struct device_attribute *attr,
4148 char *buf)
4150 struct ipw2100_priv *priv = dev_get_drvdata(d);
4151 return sprintf(buf, "%d\n", priv->ieee->scan_age);
4154 static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
4155 const char *buf, size_t count)
4157 struct ipw2100_priv *priv = dev_get_drvdata(d);
4158 struct net_device *dev = priv->net_dev;
4159 char buffer[] = "00000000";
4160 unsigned long len =
4161 (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
4162 unsigned long val;
4163 char *p = buffer;
4165 (void)dev; /* kill unused-var warning for debug-only code */
4167 IPW_DEBUG_INFO("enter\n");
4169 strncpy(buffer, buf, len);
4170 buffer[len] = 0;
4172 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4173 p++;
4174 if (p[0] == 'x' || p[0] == 'X')
4175 p++;
4176 val = simple_strtoul(p, &p, 16);
4177 } else
4178 val = simple_strtoul(p, &p, 10);
4179 if (p == buffer) {
4180 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name);
4181 } else {
4182 priv->ieee->scan_age = val;
4183 IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
4186 IPW_DEBUG_INFO("exit\n");
4187 return len;
4190 static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
4192 static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
4193 char *buf)
4195 /* 0 - RF kill not enabled
4196 1 - SW based RF kill active (sysfs)
4197 2 - HW based RF kill active
4198 3 - Both HW and SW baed RF kill active */
4199 struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
4200 int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
4201 (rf_kill_active(priv) ? 0x2 : 0x0);
4202 return sprintf(buf, "%i\n", val);
4205 static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
4207 if ((disable_radio ? 1 : 0) ==
4208 (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
4209 return 0;
4211 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4212 disable_radio ? "OFF" : "ON");
4214 mutex_lock(&priv->action_mutex);
4216 if (disable_radio) {
4217 priv->status |= STATUS_RF_KILL_SW;
4218 ipw2100_down(priv);
4219 } else {
4220 priv->status &= ~STATUS_RF_KILL_SW;
4221 if (rf_kill_active(priv)) {
4222 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4223 "disabled by HW switch\n");
4224 /* Make sure the RF_KILL check timer is running */
4225 priv->stop_rf_kill = 0;
4226 cancel_delayed_work(&priv->rf_kill);
4227 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
4228 } else
4229 schedule_reset(priv);
4232 mutex_unlock(&priv->action_mutex);
4233 return 1;
4236 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
4237 const char *buf, size_t count)
4239 struct ipw2100_priv *priv = dev_get_drvdata(d);
4240 ipw_radio_kill_sw(priv, buf[0] == '1');
4241 return count;
4244 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
4246 static struct attribute *ipw2100_sysfs_entries[] = {
4247 &dev_attr_hardware.attr,
4248 &dev_attr_registers.attr,
4249 &dev_attr_ordinals.attr,
4250 &dev_attr_pci.attr,
4251 &dev_attr_stats.attr,
4252 &dev_attr_internals.attr,
4253 &dev_attr_bssinfo.attr,
4254 &dev_attr_memory.attr,
4255 &dev_attr_scan_age.attr,
4256 &dev_attr_fatal_error.attr,
4257 &dev_attr_rf_kill.attr,
4258 &dev_attr_cfg.attr,
4259 &dev_attr_status.attr,
4260 &dev_attr_capability.attr,
4261 NULL,
4264 static struct attribute_group ipw2100_attribute_group = {
4265 .attrs = ipw2100_sysfs_entries,
4268 static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
4270 struct ipw2100_status_queue *q = &priv->status_queue;
4272 IPW_DEBUG_INFO("enter\n");
4274 q->size = entries * sizeof(struct ipw2100_status);
4275 q->drv =
4276 (struct ipw2100_status *)pci_alloc_consistent(priv->pci_dev,
4277 q->size, &q->nic);
4278 if (!q->drv) {
4279 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4280 return -ENOMEM;
4283 memset(q->drv, 0, q->size);
4285 IPW_DEBUG_INFO("exit\n");
4287 return 0;
4290 static void status_queue_free(struct ipw2100_priv *priv)
4292 IPW_DEBUG_INFO("enter\n");
4294 if (priv->status_queue.drv) {
4295 pci_free_consistent(priv->pci_dev, priv->status_queue.size,
4296 priv->status_queue.drv,
4297 priv->status_queue.nic);
4298 priv->status_queue.drv = NULL;
4301 IPW_DEBUG_INFO("exit\n");
4304 static int bd_queue_allocate(struct ipw2100_priv *priv,
4305 struct ipw2100_bd_queue *q, int entries)
4307 IPW_DEBUG_INFO("enter\n");
4309 memset(q, 0, sizeof(struct ipw2100_bd_queue));
4311 q->entries = entries;
4312 q->size = entries * sizeof(struct ipw2100_bd);
4313 q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
4314 if (!q->drv) {
4315 IPW_DEBUG_INFO
4316 ("can't allocate shared memory for buffer descriptors\n");
4317 return -ENOMEM;
4319 memset(q->drv, 0, q->size);
4321 IPW_DEBUG_INFO("exit\n");
4323 return 0;
4326 static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q)
4328 IPW_DEBUG_INFO("enter\n");
4330 if (!q)
4331 return;
4333 if (q->drv) {
4334 pci_free_consistent(priv->pci_dev, q->size, q->drv, q->nic);
4335 q->drv = NULL;
4338 IPW_DEBUG_INFO("exit\n");
4341 static void bd_queue_initialize(struct ipw2100_priv *priv,
4342 struct ipw2100_bd_queue *q, u32 base, u32 size,
4343 u32 r, u32 w)
4345 IPW_DEBUG_INFO("enter\n");
4347 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv,
4348 (u32) q->nic);
4350 write_register(priv->net_dev, base, q->nic);
4351 write_register(priv->net_dev, size, q->entries);
4352 write_register(priv->net_dev, r, q->oldest);
4353 write_register(priv->net_dev, w, q->next);
4355 IPW_DEBUG_INFO("exit\n");
4358 static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
4360 if (priv->workqueue) {
4361 priv->stop_rf_kill = 1;
4362 priv->stop_hang_check = 1;
4363 cancel_delayed_work(&priv->reset_work);
4364 cancel_delayed_work(&priv->security_work);
4365 cancel_delayed_work(&priv->wx_event_work);
4366 cancel_delayed_work(&priv->hang_check);
4367 cancel_delayed_work(&priv->rf_kill);
4368 destroy_workqueue(priv->workqueue);
4369 priv->workqueue = NULL;
4373 static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
4375 int i, j, err = -EINVAL;
4376 void *v;
4377 dma_addr_t p;
4379 IPW_DEBUG_INFO("enter\n");
4381 err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
4382 if (err) {
4383 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4384 priv->net_dev->name);
4385 return err;
4388 priv->tx_buffers =
4389 (struct ipw2100_tx_packet *)kmalloc(TX_PENDED_QUEUE_LENGTH *
4390 sizeof(struct
4391 ipw2100_tx_packet),
4392 GFP_ATOMIC);
4393 if (!priv->tx_buffers) {
4394 printk(KERN_ERR DRV_NAME
4395 ": %s: alloc failed form tx buffers.\n",
4396 priv->net_dev->name);
4397 bd_queue_free(priv, &priv->tx_queue);
4398 return -ENOMEM;
4401 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4402 v = pci_alloc_consistent(priv->pci_dev,
4403 sizeof(struct ipw2100_data_header),
4404 &p);
4405 if (!v) {
4406 printk(KERN_ERR DRV_NAME
4407 ": %s: PCI alloc failed for tx " "buffers.\n",
4408 priv->net_dev->name);
4409 err = -ENOMEM;
4410 break;
4413 priv->tx_buffers[i].type = DATA;
4414 priv->tx_buffers[i].info.d_struct.data =
4415 (struct ipw2100_data_header *)v;
4416 priv->tx_buffers[i].info.d_struct.data_phys = p;
4417 priv->tx_buffers[i].info.d_struct.txb = NULL;
4420 if (i == TX_PENDED_QUEUE_LENGTH)
4421 return 0;
4423 for (j = 0; j < i; j++) {
4424 pci_free_consistent(priv->pci_dev,
4425 sizeof(struct ipw2100_data_header),
4426 priv->tx_buffers[j].info.d_struct.data,
4427 priv->tx_buffers[j].info.d_struct.
4428 data_phys);
4431 kfree(priv->tx_buffers);
4432 priv->tx_buffers = NULL;
4434 return err;
4437 static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
4439 int i;
4441 IPW_DEBUG_INFO("enter\n");
4444 * reinitialize packet info lists
4446 INIT_LIST_HEAD(&priv->fw_pend_list);
4447 INIT_STAT(&priv->fw_pend_stat);
4450 * reinitialize lists
4452 INIT_LIST_HEAD(&priv->tx_pend_list);
4453 INIT_LIST_HEAD(&priv->tx_free_list);
4454 INIT_STAT(&priv->tx_pend_stat);
4455 INIT_STAT(&priv->tx_free_stat);
4457 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4458 /* We simply drop any SKBs that have been queued for
4459 * transmit */
4460 if (priv->tx_buffers[i].info.d_struct.txb) {
4461 ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.
4462 txb);
4463 priv->tx_buffers[i].info.d_struct.txb = NULL;
4466 list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
4469 SET_STAT(&priv->tx_free_stat, i);
4471 priv->tx_queue.oldest = 0;
4472 priv->tx_queue.available = priv->tx_queue.entries;
4473 priv->tx_queue.next = 0;
4474 INIT_STAT(&priv->txq_stat);
4475 SET_STAT(&priv->txq_stat, priv->tx_queue.available);
4477 bd_queue_initialize(priv, &priv->tx_queue,
4478 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
4479 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
4480 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
4481 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
4483 IPW_DEBUG_INFO("exit\n");
4487 static void ipw2100_tx_free(struct ipw2100_priv *priv)
4489 int i;
4491 IPW_DEBUG_INFO("enter\n");
4493 bd_queue_free(priv, &priv->tx_queue);
4495 if (!priv->tx_buffers)
4496 return;
4498 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4499 if (priv->tx_buffers[i].info.d_struct.txb) {
4500 ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.
4501 txb);
4502 priv->tx_buffers[i].info.d_struct.txb = NULL;
4504 if (priv->tx_buffers[i].info.d_struct.data)
4505 pci_free_consistent(priv->pci_dev,
4506 sizeof(struct ipw2100_data_header),
4507 priv->tx_buffers[i].info.d_struct.
4508 data,
4509 priv->tx_buffers[i].info.d_struct.
4510 data_phys);
4513 kfree(priv->tx_buffers);
4514 priv->tx_buffers = NULL;
4516 IPW_DEBUG_INFO("exit\n");
4519 static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
4521 int i, j, err = -EINVAL;
4523 IPW_DEBUG_INFO("enter\n");
4525 err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
4526 if (err) {
4527 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4528 return err;
4531 err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
4532 if (err) {
4533 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4534 bd_queue_free(priv, &priv->rx_queue);
4535 return err;
4539 * allocate packets
4541 priv->rx_buffers = (struct ipw2100_rx_packet *)
4542 kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
4543 GFP_KERNEL);
4544 if (!priv->rx_buffers) {
4545 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4547 bd_queue_free(priv, &priv->rx_queue);
4549 status_queue_free(priv);
4551 return -ENOMEM;
4554 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4555 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
4557 err = ipw2100_alloc_skb(priv, packet);
4558 if (unlikely(err)) {
4559 err = -ENOMEM;
4560 break;
4563 /* The BD holds the cache aligned address */
4564 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
4565 priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
4566 priv->status_queue.drv[i].status_fields = 0;
4569 if (i == RX_QUEUE_LENGTH)
4570 return 0;
4572 for (j = 0; j < i; j++) {
4573 pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
4574 sizeof(struct ipw2100_rx_packet),
4575 PCI_DMA_FROMDEVICE);
4576 dev_kfree_skb(priv->rx_buffers[j].skb);
4579 kfree(priv->rx_buffers);
4580 priv->rx_buffers = NULL;
4582 bd_queue_free(priv, &priv->rx_queue);
4584 status_queue_free(priv);
4586 return err;
4589 static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
4591 IPW_DEBUG_INFO("enter\n");
4593 priv->rx_queue.oldest = 0;
4594 priv->rx_queue.available = priv->rx_queue.entries - 1;
4595 priv->rx_queue.next = priv->rx_queue.entries - 1;
4597 INIT_STAT(&priv->rxq_stat);
4598 SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
4600 bd_queue_initialize(priv, &priv->rx_queue,
4601 IPW_MEM_HOST_SHARED_RX_BD_BASE,
4602 IPW_MEM_HOST_SHARED_RX_BD_SIZE,
4603 IPW_MEM_HOST_SHARED_RX_READ_INDEX,
4604 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
4606 /* set up the status queue */
4607 write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
4608 priv->status_queue.nic);
4610 IPW_DEBUG_INFO("exit\n");
4613 static void ipw2100_rx_free(struct ipw2100_priv *priv)
4615 int i;
4617 IPW_DEBUG_INFO("enter\n");
4619 bd_queue_free(priv, &priv->rx_queue);
4620 status_queue_free(priv);
4622 if (!priv->rx_buffers)
4623 return;
4625 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4626 if (priv->rx_buffers[i].rxp) {
4627 pci_unmap_single(priv->pci_dev,
4628 priv->rx_buffers[i].dma_addr,
4629 sizeof(struct ipw2100_rx),
4630 PCI_DMA_FROMDEVICE);
4631 dev_kfree_skb(priv->rx_buffers[i].skb);
4635 kfree(priv->rx_buffers);
4636 priv->rx_buffers = NULL;
4638 IPW_DEBUG_INFO("exit\n");
4641 static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
4643 u32 length = ETH_ALEN;
4644 u8 mac[ETH_ALEN];
4646 int err;
4648 err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, mac, &length);
4649 if (err) {
4650 IPW_DEBUG_INFO("MAC address read failed\n");
4651 return -EIO;
4653 IPW_DEBUG_INFO("card MAC is %02X:%02X:%02X:%02X:%02X:%02X\n",
4654 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
4656 memcpy(priv->net_dev->dev_addr, mac, ETH_ALEN);
4658 return 0;
4661 /********************************************************************
4663 * Firmware Commands
4665 ********************************************************************/
4667 static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
4669 struct host_command cmd = {
4670 .host_command = ADAPTER_ADDRESS,
4671 .host_command_sequence = 0,
4672 .host_command_length = ETH_ALEN
4674 int err;
4676 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4678 IPW_DEBUG_INFO("enter\n");
4680 if (priv->config & CFG_CUSTOM_MAC) {
4681 memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN);
4682 memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
4683 } else
4684 memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
4685 ETH_ALEN);
4687 err = ipw2100_hw_send_command(priv, &cmd);
4689 IPW_DEBUG_INFO("exit\n");
4690 return err;
4693 static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
4694 int batch_mode)
4696 struct host_command cmd = {
4697 .host_command = PORT_TYPE,
4698 .host_command_sequence = 0,
4699 .host_command_length = sizeof(u32)
4701 int err;
4703 switch (port_type) {
4704 case IW_MODE_INFRA:
4705 cmd.host_command_parameters[0] = IPW_BSS;
4706 break;
4707 case IW_MODE_ADHOC:
4708 cmd.host_command_parameters[0] = IPW_IBSS;
4709 break;
4712 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4713 port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
4715 if (!batch_mode) {
4716 err = ipw2100_disable_adapter(priv);
4717 if (err) {
4718 printk(KERN_ERR DRV_NAME
4719 ": %s: Could not disable adapter %d\n",
4720 priv->net_dev->name, err);
4721 return err;
4725 /* send cmd to firmware */
4726 err = ipw2100_hw_send_command(priv, &cmd);
4728 if (!batch_mode)
4729 ipw2100_enable_adapter(priv);
4731 return err;
4734 static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel,
4735 int batch_mode)
4737 struct host_command cmd = {
4738 .host_command = CHANNEL,
4739 .host_command_sequence = 0,
4740 .host_command_length = sizeof(u32)
4742 int err;
4744 cmd.host_command_parameters[0] = channel;
4746 IPW_DEBUG_HC("CHANNEL: %d\n", channel);
4748 /* If BSS then we don't support channel selection */
4749 if (priv->ieee->iw_mode == IW_MODE_INFRA)
4750 return 0;
4752 if ((channel != 0) &&
4753 ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
4754 return -EINVAL;
4756 if (!batch_mode) {
4757 err = ipw2100_disable_adapter(priv);
4758 if (err)
4759 return err;
4762 err = ipw2100_hw_send_command(priv, &cmd);
4763 if (err) {
4764 IPW_DEBUG_INFO("Failed to set channel to %d", channel);
4765 return err;
4768 if (channel)
4769 priv->config |= CFG_STATIC_CHANNEL;
4770 else
4771 priv->config &= ~CFG_STATIC_CHANNEL;
4773 priv->channel = channel;
4775 if (!batch_mode) {
4776 err = ipw2100_enable_adapter(priv);
4777 if (err)
4778 return err;
4781 return 0;
4784 static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
4786 struct host_command cmd = {
4787 .host_command = SYSTEM_CONFIG,
4788 .host_command_sequence = 0,
4789 .host_command_length = 12,
4791 u32 ibss_mask, len = sizeof(u32);
4792 int err;
4794 /* Set system configuration */
4796 if (!batch_mode) {
4797 err = ipw2100_disable_adapter(priv);
4798 if (err)
4799 return err;
4802 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
4803 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
4805 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
4806 IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE;
4808 if (!(priv->config & CFG_LONG_PREAMBLE))
4809 cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
4811 err = ipw2100_get_ordinal(priv,
4812 IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
4813 &ibss_mask, &len);
4814 if (err)
4815 ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
4817 cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
4818 cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
4820 /* 11b only */
4821 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4823 err = ipw2100_hw_send_command(priv, &cmd);
4824 if (err)
4825 return err;
4827 /* If IPv6 is configured in the kernel then we don't want to filter out all
4828 * of the multicast packets as IPv6 needs some. */
4829 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4830 cmd.host_command = ADD_MULTICAST;
4831 cmd.host_command_sequence = 0;
4832 cmd.host_command_length = 0;
4834 ipw2100_hw_send_command(priv, &cmd);
4835 #endif
4836 if (!batch_mode) {
4837 err = ipw2100_enable_adapter(priv);
4838 if (err)
4839 return err;
4842 return 0;
4845 static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate,
4846 int batch_mode)
4848 struct host_command cmd = {
4849 .host_command = BASIC_TX_RATES,
4850 .host_command_sequence = 0,
4851 .host_command_length = 4
4853 int err;
4855 cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
4857 if (!batch_mode) {
4858 err = ipw2100_disable_adapter(priv);
4859 if (err)
4860 return err;
4863 /* Set BASIC TX Rate first */
4864 ipw2100_hw_send_command(priv, &cmd);
4866 /* Set TX Rate */
4867 cmd.host_command = TX_RATES;
4868 ipw2100_hw_send_command(priv, &cmd);
4870 /* Set MSDU TX Rate */
4871 cmd.host_command = MSDU_TX_RATES;
4872 ipw2100_hw_send_command(priv, &cmd);
4874 if (!batch_mode) {
4875 err = ipw2100_enable_adapter(priv);
4876 if (err)
4877 return err;
4880 priv->tx_rates = rate;
4882 return 0;
4885 static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
4887 struct host_command cmd = {
4888 .host_command = POWER_MODE,
4889 .host_command_sequence = 0,
4890 .host_command_length = 4
4892 int err;
4894 cmd.host_command_parameters[0] = power_level;
4896 err = ipw2100_hw_send_command(priv, &cmd);
4897 if (err)
4898 return err;
4900 if (power_level == IPW_POWER_MODE_CAM)
4901 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
4902 else
4903 priv->power_mode = IPW_POWER_ENABLED | power_level;
4905 #ifdef CONFIG_IPW2100_TX_POWER
4906 if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
4907 /* Set beacon interval */
4908 cmd.host_command = TX_POWER_INDEX;
4909 cmd.host_command_parameters[0] = (u32) priv->adhoc_power;
4911 err = ipw2100_hw_send_command(priv, &cmd);
4912 if (err)
4913 return err;
4915 #endif
4917 return 0;
4920 static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
4922 struct host_command cmd = {
4923 .host_command = RTS_THRESHOLD,
4924 .host_command_sequence = 0,
4925 .host_command_length = 4
4927 int err;
4929 if (threshold & RTS_DISABLED)
4930 cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
4931 else
4932 cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
4934 err = ipw2100_hw_send_command(priv, &cmd);
4935 if (err)
4936 return err;
4938 priv->rts_threshold = threshold;
4940 return 0;
4943 #if 0
4944 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
4945 u32 threshold, int batch_mode)
4947 struct host_command cmd = {
4948 .host_command = FRAG_THRESHOLD,
4949 .host_command_sequence = 0,
4950 .host_command_length = 4,
4951 .host_command_parameters[0] = 0,
4953 int err;
4955 if (!batch_mode) {
4956 err = ipw2100_disable_adapter(priv);
4957 if (err)
4958 return err;
4961 if (threshold == 0)
4962 threshold = DEFAULT_FRAG_THRESHOLD;
4963 else {
4964 threshold = max(threshold, MIN_FRAG_THRESHOLD);
4965 threshold = min(threshold, MAX_FRAG_THRESHOLD);
4968 cmd.host_command_parameters[0] = threshold;
4970 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
4972 err = ipw2100_hw_send_command(priv, &cmd);
4974 if (!batch_mode)
4975 ipw2100_enable_adapter(priv);
4977 if (!err)
4978 priv->frag_threshold = threshold;
4980 return err;
4982 #endif
4984 static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
4986 struct host_command cmd = {
4987 .host_command = SHORT_RETRY_LIMIT,
4988 .host_command_sequence = 0,
4989 .host_command_length = 4
4991 int err;
4993 cmd.host_command_parameters[0] = retry;
4995 err = ipw2100_hw_send_command(priv, &cmd);
4996 if (err)
4997 return err;
4999 priv->short_retry_limit = retry;
5001 return 0;
5004 static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
5006 struct host_command cmd = {
5007 .host_command = LONG_RETRY_LIMIT,
5008 .host_command_sequence = 0,
5009 .host_command_length = 4
5011 int err;
5013 cmd.host_command_parameters[0] = retry;
5015 err = ipw2100_hw_send_command(priv, &cmd);
5016 if (err)
5017 return err;
5019 priv->long_retry_limit = retry;
5021 return 0;
5024 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
5025 int batch_mode)
5027 struct host_command cmd = {
5028 .host_command = MANDATORY_BSSID,
5029 .host_command_sequence = 0,
5030 .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
5032 int err;
5034 #ifdef CONFIG_IPW2100_DEBUG
5035 if (bssid != NULL)
5036 IPW_DEBUG_HC("MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n",
5037 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4],
5038 bssid[5]);
5039 else
5040 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5041 #endif
5042 /* if BSSID is empty then we disable mandatory bssid mode */
5043 if (bssid != NULL)
5044 memcpy(cmd.host_command_parameters, bssid, ETH_ALEN);
5046 if (!batch_mode) {
5047 err = ipw2100_disable_adapter(priv);
5048 if (err)
5049 return err;
5052 err = ipw2100_hw_send_command(priv, &cmd);
5054 if (!batch_mode)
5055 ipw2100_enable_adapter(priv);
5057 return err;
5060 static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
5062 struct host_command cmd = {
5063 .host_command = DISASSOCIATION_BSSID,
5064 .host_command_sequence = 0,
5065 .host_command_length = ETH_ALEN
5067 int err;
5068 int len;
5070 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5072 len = ETH_ALEN;
5073 /* The Firmware currently ignores the BSSID and just disassociates from
5074 * the currently associated AP -- but in the off chance that a future
5075 * firmware does use the BSSID provided here, we go ahead and try and
5076 * set it to the currently associated AP's BSSID */
5077 memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
5079 err = ipw2100_hw_send_command(priv, &cmd);
5081 return err;
5084 static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
5085 struct ipw2100_wpa_assoc_frame *, int)
5086 __attribute__ ((unused));
5088 static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
5089 struct ipw2100_wpa_assoc_frame *wpa_frame,
5090 int batch_mode)
5092 struct host_command cmd = {
5093 .host_command = SET_WPA_IE,
5094 .host_command_sequence = 0,
5095 .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
5097 int err;
5099 IPW_DEBUG_HC("SET_WPA_IE\n");
5101 if (!batch_mode) {
5102 err = ipw2100_disable_adapter(priv);
5103 if (err)
5104 return err;
5107 memcpy(cmd.host_command_parameters, wpa_frame,
5108 sizeof(struct ipw2100_wpa_assoc_frame));
5110 err = ipw2100_hw_send_command(priv, &cmd);
5112 if (!batch_mode) {
5113 if (ipw2100_enable_adapter(priv))
5114 err = -EIO;
5117 return err;
5120 struct security_info_params {
5121 u32 allowed_ciphers;
5122 u16 version;
5123 u8 auth_mode;
5124 u8 replay_counters_number;
5125 u8 unicast_using_group;
5126 } __attribute__ ((packed));
5128 static int ipw2100_set_security_information(struct ipw2100_priv *priv,
5129 int auth_mode,
5130 int security_level,
5131 int unicast_using_group,
5132 int batch_mode)
5134 struct host_command cmd = {
5135 .host_command = SET_SECURITY_INFORMATION,
5136 .host_command_sequence = 0,
5137 .host_command_length = sizeof(struct security_info_params)
5139 struct security_info_params *security =
5140 (struct security_info_params *)&cmd.host_command_parameters;
5141 int err;
5142 memset(security, 0, sizeof(*security));
5144 /* If shared key AP authentication is turned on, then we need to
5145 * configure the firmware to try and use it.
5147 * Actual data encryption/decryption is handled by the host. */
5148 security->auth_mode = auth_mode;
5149 security->unicast_using_group = unicast_using_group;
5151 switch (security_level) {
5152 default:
5153 case SEC_LEVEL_0:
5154 security->allowed_ciphers = IPW_NONE_CIPHER;
5155 break;
5156 case SEC_LEVEL_1:
5157 security->allowed_ciphers = IPW_WEP40_CIPHER |
5158 IPW_WEP104_CIPHER;
5159 break;
5160 case SEC_LEVEL_2:
5161 security->allowed_ciphers = IPW_WEP40_CIPHER |
5162 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
5163 break;
5164 case SEC_LEVEL_2_CKIP:
5165 security->allowed_ciphers = IPW_WEP40_CIPHER |
5166 IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
5167 break;
5168 case SEC_LEVEL_3:
5169 security->allowed_ciphers = IPW_WEP40_CIPHER |
5170 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
5171 break;
5174 IPW_DEBUG_HC
5175 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5176 security->auth_mode, security->allowed_ciphers, security_level);
5178 security->replay_counters_number = 0;
5180 if (!batch_mode) {
5181 err = ipw2100_disable_adapter(priv);
5182 if (err)
5183 return err;
5186 err = ipw2100_hw_send_command(priv, &cmd);
5188 if (!batch_mode)
5189 ipw2100_enable_adapter(priv);
5191 return err;
5194 static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power)
5196 struct host_command cmd = {
5197 .host_command = TX_POWER_INDEX,
5198 .host_command_sequence = 0,
5199 .host_command_length = 4
5201 int err = 0;
5202 u32 tmp = tx_power;
5204 if (tx_power != IPW_TX_POWER_DEFAULT)
5205 tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
5206 (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
5208 cmd.host_command_parameters[0] = tmp;
5210 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
5211 err = ipw2100_hw_send_command(priv, &cmd);
5212 if (!err)
5213 priv->tx_power = tx_power;
5215 return 0;
5218 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
5219 u32 interval, int batch_mode)
5221 struct host_command cmd = {
5222 .host_command = BEACON_INTERVAL,
5223 .host_command_sequence = 0,
5224 .host_command_length = 4
5226 int err;
5228 cmd.host_command_parameters[0] = interval;
5230 IPW_DEBUG_INFO("enter\n");
5232 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5233 if (!batch_mode) {
5234 err = ipw2100_disable_adapter(priv);
5235 if (err)
5236 return err;
5239 ipw2100_hw_send_command(priv, &cmd);
5241 if (!batch_mode) {
5242 err = ipw2100_enable_adapter(priv);
5243 if (err)
5244 return err;
5248 IPW_DEBUG_INFO("exit\n");
5250 return 0;
5253 void ipw2100_queues_initialize(struct ipw2100_priv *priv)
5255 ipw2100_tx_initialize(priv);
5256 ipw2100_rx_initialize(priv);
5257 ipw2100_msg_initialize(priv);
5260 void ipw2100_queues_free(struct ipw2100_priv *priv)
5262 ipw2100_tx_free(priv);
5263 ipw2100_rx_free(priv);
5264 ipw2100_msg_free(priv);
5267 int ipw2100_queues_allocate(struct ipw2100_priv *priv)
5269 if (ipw2100_tx_allocate(priv) ||
5270 ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv))
5271 goto fail;
5273 return 0;
5275 fail:
5276 ipw2100_tx_free(priv);
5277 ipw2100_rx_free(priv);
5278 ipw2100_msg_free(priv);
5279 return -ENOMEM;
5282 #define IPW_PRIVACY_CAPABLE 0x0008
5284 static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
5285 int batch_mode)
5287 struct host_command cmd = {
5288 .host_command = WEP_FLAGS,
5289 .host_command_sequence = 0,
5290 .host_command_length = 4
5292 int err;
5294 cmd.host_command_parameters[0] = flags;
5296 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
5298 if (!batch_mode) {
5299 err = ipw2100_disable_adapter(priv);
5300 if (err) {
5301 printk(KERN_ERR DRV_NAME
5302 ": %s: Could not disable adapter %d\n",
5303 priv->net_dev->name, err);
5304 return err;
5308 /* send cmd to firmware */
5309 err = ipw2100_hw_send_command(priv, &cmd);
5311 if (!batch_mode)
5312 ipw2100_enable_adapter(priv);
5314 return err;
5317 struct ipw2100_wep_key {
5318 u8 idx;
5319 u8 len;
5320 u8 key[13];
5323 /* Macros to ease up priting WEP keys */
5324 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5325 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5326 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5327 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5330 * Set a the wep key
5332 * @priv: struct to work on
5333 * @idx: index of the key we want to set
5334 * @key: ptr to the key data to set
5335 * @len: length of the buffer at @key
5336 * @batch_mode: FIXME perform the operation in batch mode, not
5337 * disabling the device.
5339 * @returns 0 if OK, < 0 errno code on error.
5341 * Fill out a command structure with the new wep key, length an
5342 * index and send it down the wire.
5344 static int ipw2100_set_key(struct ipw2100_priv *priv,
5345 int idx, char *key, int len, int batch_mode)
5347 int keylen = len ? (len <= 5 ? 5 : 13) : 0;
5348 struct host_command cmd = {
5349 .host_command = WEP_KEY_INFO,
5350 .host_command_sequence = 0,
5351 .host_command_length = sizeof(struct ipw2100_wep_key),
5353 struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters;
5354 int err;
5356 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5357 idx, keylen, len);
5359 /* NOTE: We don't check cached values in case the firmware was reset
5360 * or some other problem is occurring. If the user is setting the key,
5361 * then we push the change */
5363 wep_key->idx = idx;
5364 wep_key->len = keylen;
5366 if (keylen) {
5367 memcpy(wep_key->key, key, len);
5368 memset(wep_key->key + len, 0, keylen - len);
5371 /* Will be optimized out on debug not being configured in */
5372 if (keylen == 0)
5373 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5374 priv->net_dev->name, wep_key->idx);
5375 else if (keylen == 5)
5376 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
5377 priv->net_dev->name, wep_key->idx, wep_key->len,
5378 WEP_STR_64(wep_key->key));
5379 else
5380 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5381 "\n",
5382 priv->net_dev->name, wep_key->idx, wep_key->len,
5383 WEP_STR_128(wep_key->key));
5385 if (!batch_mode) {
5386 err = ipw2100_disable_adapter(priv);
5387 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5388 if (err) {
5389 printk(KERN_ERR DRV_NAME
5390 ": %s: Could not disable adapter %d\n",
5391 priv->net_dev->name, err);
5392 return err;
5396 /* send cmd to firmware */
5397 err = ipw2100_hw_send_command(priv, &cmd);
5399 if (!batch_mode) {
5400 int err2 = ipw2100_enable_adapter(priv);
5401 if (err == 0)
5402 err = err2;
5404 return err;
5407 static int ipw2100_set_key_index(struct ipw2100_priv *priv,
5408 int idx, int batch_mode)
5410 struct host_command cmd = {
5411 .host_command = WEP_KEY_INDEX,
5412 .host_command_sequence = 0,
5413 .host_command_length = 4,
5414 .host_command_parameters = {idx},
5416 int err;
5418 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
5420 if (idx < 0 || idx > 3)
5421 return -EINVAL;
5423 if (!batch_mode) {
5424 err = ipw2100_disable_adapter(priv);
5425 if (err) {
5426 printk(KERN_ERR DRV_NAME
5427 ": %s: Could not disable adapter %d\n",
5428 priv->net_dev->name, err);
5429 return err;
5433 /* send cmd to firmware */
5434 err = ipw2100_hw_send_command(priv, &cmd);
5436 if (!batch_mode)
5437 ipw2100_enable_adapter(priv);
5439 return err;
5442 static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode)
5444 int i, err, auth_mode, sec_level, use_group;
5446 if (!(priv->status & STATUS_RUNNING))
5447 return 0;
5449 if (!batch_mode) {
5450 err = ipw2100_disable_adapter(priv);
5451 if (err)
5452 return err;
5455 if (!priv->ieee->sec.enabled) {
5456 err =
5457 ipw2100_set_security_information(priv, IPW_AUTH_OPEN,
5458 SEC_LEVEL_0, 0, 1);
5459 } else {
5460 auth_mode = IPW_AUTH_OPEN;
5461 if (priv->ieee->sec.flags & SEC_AUTH_MODE) {
5462 if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY)
5463 auth_mode = IPW_AUTH_SHARED;
5464 else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP)
5465 auth_mode = IPW_AUTH_LEAP_CISCO_ID;
5468 sec_level = SEC_LEVEL_0;
5469 if (priv->ieee->sec.flags & SEC_LEVEL)
5470 sec_level = priv->ieee->sec.level;
5472 use_group = 0;
5473 if (priv->ieee->sec.flags & SEC_UNICAST_GROUP)
5474 use_group = priv->ieee->sec.unicast_uses_group;
5476 err =
5477 ipw2100_set_security_information(priv, auth_mode, sec_level,
5478 use_group, 1);
5481 if (err)
5482 goto exit;
5484 if (priv->ieee->sec.enabled) {
5485 for (i = 0; i < 4; i++) {
5486 if (!(priv->ieee->sec.flags & (1 << i))) {
5487 memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN);
5488 priv->ieee->sec.key_sizes[i] = 0;
5489 } else {
5490 err = ipw2100_set_key(priv, i,
5491 priv->ieee->sec.keys[i],
5492 priv->ieee->sec.
5493 key_sizes[i], 1);
5494 if (err)
5495 goto exit;
5499 ipw2100_set_key_index(priv, priv->ieee->tx_keyidx, 1);
5502 /* Always enable privacy so the Host can filter WEP packets if
5503 * encrypted data is sent up */
5504 err =
5505 ipw2100_set_wep_flags(priv,
5506 priv->ieee->sec.
5507 enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
5508 if (err)
5509 goto exit;
5511 priv->status &= ~STATUS_SECURITY_UPDATED;
5513 exit:
5514 if (!batch_mode)
5515 ipw2100_enable_adapter(priv);
5517 return err;
5520 static void ipw2100_security_work(struct ipw2100_priv *priv)
5522 /* If we happen to have reconnected before we get a chance to
5523 * process this, then update the security settings--which causes
5524 * a disassociation to occur */
5525 if (!(priv->status & STATUS_ASSOCIATED) &&
5526 priv->status & STATUS_SECURITY_UPDATED)
5527 ipw2100_configure_security(priv, 0);
5530 static void shim__set_security(struct net_device *dev,
5531 struct ieee80211_security *sec)
5533 struct ipw2100_priv *priv = ieee80211_priv(dev);
5534 int i, force_update = 0;
5536 mutex_lock(&priv->action_mutex);
5537 if (!(priv->status & STATUS_INITIALIZED))
5538 goto done;
5540 for (i = 0; i < 4; i++) {
5541 if (sec->flags & (1 << i)) {
5542 priv->ieee->sec.key_sizes[i] = sec->key_sizes[i];
5543 if (sec->key_sizes[i] == 0)
5544 priv->ieee->sec.flags &= ~(1 << i);
5545 else
5546 memcpy(priv->ieee->sec.keys[i], sec->keys[i],
5547 sec->key_sizes[i]);
5548 if (sec->level == SEC_LEVEL_1) {
5549 priv->ieee->sec.flags |= (1 << i);
5550 priv->status |= STATUS_SECURITY_UPDATED;
5551 } else
5552 priv->ieee->sec.flags &= ~(1 << i);
5556 if ((sec->flags & SEC_ACTIVE_KEY) &&
5557 priv->ieee->sec.active_key != sec->active_key) {
5558 if (sec->active_key <= 3) {
5559 priv->ieee->sec.active_key = sec->active_key;
5560 priv->ieee->sec.flags |= SEC_ACTIVE_KEY;
5561 } else
5562 priv->ieee->sec.flags &= ~SEC_ACTIVE_KEY;
5564 priv->status |= STATUS_SECURITY_UPDATED;
5567 if ((sec->flags & SEC_AUTH_MODE) &&
5568 (priv->ieee->sec.auth_mode != sec->auth_mode)) {
5569 priv->ieee->sec.auth_mode = sec->auth_mode;
5570 priv->ieee->sec.flags |= SEC_AUTH_MODE;
5571 priv->status |= STATUS_SECURITY_UPDATED;
5574 if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) {
5575 priv->ieee->sec.flags |= SEC_ENABLED;
5576 priv->ieee->sec.enabled = sec->enabled;
5577 priv->status |= STATUS_SECURITY_UPDATED;
5578 force_update = 1;
5581 if (sec->flags & SEC_ENCRYPT)
5582 priv->ieee->sec.encrypt = sec->encrypt;
5584 if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) {
5585 priv->ieee->sec.level = sec->level;
5586 priv->ieee->sec.flags |= SEC_LEVEL;
5587 priv->status |= STATUS_SECURITY_UPDATED;
5590 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5591 priv->ieee->sec.flags & (1 << 8) ? '1' : '0',
5592 priv->ieee->sec.flags & (1 << 7) ? '1' : '0',
5593 priv->ieee->sec.flags & (1 << 6) ? '1' : '0',
5594 priv->ieee->sec.flags & (1 << 5) ? '1' : '0',
5595 priv->ieee->sec.flags & (1 << 4) ? '1' : '0',
5596 priv->ieee->sec.flags & (1 << 3) ? '1' : '0',
5597 priv->ieee->sec.flags & (1 << 2) ? '1' : '0',
5598 priv->ieee->sec.flags & (1 << 1) ? '1' : '0',
5599 priv->ieee->sec.flags & (1 << 0) ? '1' : '0');
5601 /* As a temporary work around to enable WPA until we figure out why
5602 * wpa_supplicant toggles the security capability of the driver, which
5603 * forces a disassocation with force_update...
5605 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5606 if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
5607 ipw2100_configure_security(priv, 0);
5608 done:
5609 mutex_unlock(&priv->action_mutex);
5612 static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
5614 int err;
5615 int batch_mode = 1;
5616 u8 *bssid;
5618 IPW_DEBUG_INFO("enter\n");
5620 err = ipw2100_disable_adapter(priv);
5621 if (err)
5622 return err;
5623 #ifdef CONFIG_IPW2100_MONITOR
5624 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
5625 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5626 if (err)
5627 return err;
5629 IPW_DEBUG_INFO("exit\n");
5631 return 0;
5633 #endif /* CONFIG_IPW2100_MONITOR */
5635 err = ipw2100_read_mac_address(priv);
5636 if (err)
5637 return -EIO;
5639 err = ipw2100_set_mac_address(priv, batch_mode);
5640 if (err)
5641 return err;
5643 err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
5644 if (err)
5645 return err;
5647 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5648 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5649 if (err)
5650 return err;
5653 err = ipw2100_system_config(priv, batch_mode);
5654 if (err)
5655 return err;
5657 err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
5658 if (err)
5659 return err;
5661 /* Default to power mode OFF */
5662 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
5663 if (err)
5664 return err;
5666 err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
5667 if (err)
5668 return err;
5670 if (priv->config & CFG_STATIC_BSSID)
5671 bssid = priv->bssid;
5672 else
5673 bssid = NULL;
5674 err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
5675 if (err)
5676 return err;
5678 if (priv->config & CFG_STATIC_ESSID)
5679 err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
5680 batch_mode);
5681 else
5682 err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
5683 if (err)
5684 return err;
5686 err = ipw2100_configure_security(priv, batch_mode);
5687 if (err)
5688 return err;
5690 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5691 err =
5692 ipw2100_set_ibss_beacon_interval(priv,
5693 priv->beacon_interval,
5694 batch_mode);
5695 if (err)
5696 return err;
5698 err = ipw2100_set_tx_power(priv, priv->tx_power);
5699 if (err)
5700 return err;
5704 err = ipw2100_set_fragmentation_threshold(
5705 priv, priv->frag_threshold, batch_mode);
5706 if (err)
5707 return err;
5710 IPW_DEBUG_INFO("exit\n");
5712 return 0;
5715 /*************************************************************************
5717 * EXTERNALLY CALLED METHODS
5719 *************************************************************************/
5721 /* This method is called by the network layer -- not to be confused with
5722 * ipw2100_set_mac_address() declared above called by this driver (and this
5723 * method as well) to talk to the firmware */
5724 static int ipw2100_set_address(struct net_device *dev, void *p)
5726 struct ipw2100_priv *priv = ieee80211_priv(dev);
5727 struct sockaddr *addr = p;
5728 int err = 0;
5730 if (!is_valid_ether_addr(addr->sa_data))
5731 return -EADDRNOTAVAIL;
5733 mutex_lock(&priv->action_mutex);
5735 priv->config |= CFG_CUSTOM_MAC;
5736 memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
5738 err = ipw2100_set_mac_address(priv, 0);
5739 if (err)
5740 goto done;
5742 priv->reset_backoff = 0;
5743 mutex_unlock(&priv->action_mutex);
5744 ipw2100_reset_adapter(priv);
5745 return 0;
5747 done:
5748 mutex_unlock(&priv->action_mutex);
5749 return err;
5752 static int ipw2100_open(struct net_device *dev)
5754 struct ipw2100_priv *priv = ieee80211_priv(dev);
5755 unsigned long flags;
5756 IPW_DEBUG_INFO("dev->open\n");
5758 spin_lock_irqsave(&priv->low_lock, flags);
5759 if (priv->status & STATUS_ASSOCIATED) {
5760 netif_carrier_on(dev);
5761 netif_start_queue(dev);
5763 spin_unlock_irqrestore(&priv->low_lock, flags);
5765 return 0;
5768 static int ipw2100_close(struct net_device *dev)
5770 struct ipw2100_priv *priv = ieee80211_priv(dev);
5771 unsigned long flags;
5772 struct list_head *element;
5773 struct ipw2100_tx_packet *packet;
5775 IPW_DEBUG_INFO("enter\n");
5777 spin_lock_irqsave(&priv->low_lock, flags);
5779 if (priv->status & STATUS_ASSOCIATED)
5780 netif_carrier_off(dev);
5781 netif_stop_queue(dev);
5783 /* Flush the TX queue ... */
5784 while (!list_empty(&priv->tx_pend_list)) {
5785 element = priv->tx_pend_list.next;
5786 packet = list_entry(element, struct ipw2100_tx_packet, list);
5788 list_del(element);
5789 DEC_STAT(&priv->tx_pend_stat);
5791 ieee80211_txb_free(packet->info.d_struct.txb);
5792 packet->info.d_struct.txb = NULL;
5794 list_add_tail(element, &priv->tx_free_list);
5795 INC_STAT(&priv->tx_free_stat);
5797 spin_unlock_irqrestore(&priv->low_lock, flags);
5799 IPW_DEBUG_INFO("exit\n");
5801 return 0;
5805 * TODO: Fix this function... its just wrong
5807 static void ipw2100_tx_timeout(struct net_device *dev)
5809 struct ipw2100_priv *priv = ieee80211_priv(dev);
5811 priv->ieee->stats.tx_errors++;
5813 #ifdef CONFIG_IPW2100_MONITOR
5814 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
5815 return;
5816 #endif
5818 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5819 dev->name);
5820 schedule_reset(priv);
5824 * TODO: reimplement it so that it reads statistics
5825 * from the adapter using ordinal tables
5826 * instead of/in addition to collecting them
5827 * in the driver
5829 static struct net_device_stats *ipw2100_stats(struct net_device *dev)
5831 struct ipw2100_priv *priv = ieee80211_priv(dev);
5833 return &priv->ieee->stats;
5836 static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value)
5838 /* This is called when wpa_supplicant loads and closes the driver
5839 * interface. */
5840 priv->ieee->wpa_enabled = value;
5841 return 0;
5844 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value)
5847 struct ieee80211_device *ieee = priv->ieee;
5848 struct ieee80211_security sec = {
5849 .flags = SEC_AUTH_MODE,
5851 int ret = 0;
5853 if (value & IW_AUTH_ALG_SHARED_KEY) {
5854 sec.auth_mode = WLAN_AUTH_SHARED_KEY;
5855 ieee->open_wep = 0;
5856 } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
5857 sec.auth_mode = WLAN_AUTH_OPEN;
5858 ieee->open_wep = 1;
5859 } else if (value & IW_AUTH_ALG_LEAP) {
5860 sec.auth_mode = WLAN_AUTH_LEAP;
5861 ieee->open_wep = 1;
5862 } else
5863 return -EINVAL;
5865 if (ieee->set_security)
5866 ieee->set_security(ieee->dev, &sec);
5867 else
5868 ret = -EOPNOTSUPP;
5870 return ret;
5873 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
5874 char *wpa_ie, int wpa_ie_len)
5877 struct ipw2100_wpa_assoc_frame frame;
5879 frame.fixed_ie_mask = 0;
5881 /* copy WPA IE */
5882 memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
5883 frame.var_ie_len = wpa_ie_len;
5885 /* make sure WPA is enabled */
5886 ipw2100_wpa_enable(priv, 1);
5887 ipw2100_set_wpa_ie(priv, &frame, 0);
5890 static void ipw_ethtool_get_drvinfo(struct net_device *dev,
5891 struct ethtool_drvinfo *info)
5893 struct ipw2100_priv *priv = ieee80211_priv(dev);
5894 char fw_ver[64], ucode_ver[64];
5896 strcpy(info->driver, DRV_NAME);
5897 strcpy(info->version, DRV_VERSION);
5899 ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
5900 ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
5902 snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
5903 fw_ver, priv->eeprom_version, ucode_ver);
5905 strcpy(info->bus_info, pci_name(priv->pci_dev));
5908 static u32 ipw2100_ethtool_get_link(struct net_device *dev)
5910 struct ipw2100_priv *priv = ieee80211_priv(dev);
5911 return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
5914 static struct ethtool_ops ipw2100_ethtool_ops = {
5915 .get_link = ipw2100_ethtool_get_link,
5916 .get_drvinfo = ipw_ethtool_get_drvinfo,
5919 static void ipw2100_hang_check(void *adapter)
5921 struct ipw2100_priv *priv = adapter;
5922 unsigned long flags;
5923 u32 rtc = 0xa5a5a5a5;
5924 u32 len = sizeof(rtc);
5925 int restart = 0;
5927 spin_lock_irqsave(&priv->low_lock, flags);
5929 if (priv->fatal_error != 0) {
5930 /* If fatal_error is set then we need to restart */
5931 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
5932 priv->net_dev->name);
5934 restart = 1;
5935 } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
5936 (rtc == priv->last_rtc)) {
5937 /* Check if firmware is hung */
5938 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
5939 priv->net_dev->name);
5941 restart = 1;
5944 if (restart) {
5945 /* Kill timer */
5946 priv->stop_hang_check = 1;
5947 priv->hangs++;
5949 /* Restart the NIC */
5950 schedule_reset(priv);
5953 priv->last_rtc = rtc;
5955 if (!priv->stop_hang_check)
5956 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
5958 spin_unlock_irqrestore(&priv->low_lock, flags);
5961 static void ipw2100_rf_kill(void *adapter)
5963 struct ipw2100_priv *priv = adapter;
5964 unsigned long flags;
5966 spin_lock_irqsave(&priv->low_lock, flags);
5968 if (rf_kill_active(priv)) {
5969 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
5970 if (!priv->stop_rf_kill)
5971 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
5972 goto exit_unlock;
5975 /* RF Kill is now disabled, so bring the device back up */
5977 if (!(priv->status & STATUS_RF_KILL_MASK)) {
5978 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
5979 "device\n");
5980 schedule_reset(priv);
5981 } else
5982 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
5983 "enabled\n");
5985 exit_unlock:
5986 spin_unlock_irqrestore(&priv->low_lock, flags);
5989 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
5991 /* Look into using netdev destructor to shutdown ieee80211? */
5993 static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
5994 void __iomem * base_addr,
5995 unsigned long mem_start,
5996 unsigned long mem_len)
5998 struct ipw2100_priv *priv;
5999 struct net_device *dev;
6001 dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
6002 if (!dev)
6003 return NULL;
6004 priv = ieee80211_priv(dev);
6005 priv->ieee = netdev_priv(dev);
6006 priv->pci_dev = pci_dev;
6007 priv->net_dev = dev;
6009 priv->ieee->hard_start_xmit = ipw2100_tx;
6010 priv->ieee->set_security = shim__set_security;
6012 priv->ieee->perfect_rssi = -20;
6013 priv->ieee->worst_rssi = -85;
6015 dev->open = ipw2100_open;
6016 dev->stop = ipw2100_close;
6017 dev->init = ipw2100_net_init;
6018 dev->get_stats = ipw2100_stats;
6019 dev->ethtool_ops = &ipw2100_ethtool_ops;
6020 dev->tx_timeout = ipw2100_tx_timeout;
6021 dev->wireless_handlers = &ipw2100_wx_handler_def;
6022 priv->wireless_data.ieee80211 = priv->ieee;
6023 dev->wireless_data = &priv->wireless_data;
6024 dev->set_mac_address = ipw2100_set_address;
6025 dev->watchdog_timeo = 3 * HZ;
6026 dev->irq = 0;
6028 dev->base_addr = (unsigned long)base_addr;
6029 dev->mem_start = mem_start;
6030 dev->mem_end = dev->mem_start + mem_len - 1;
6032 /* NOTE: We don't use the wireless_handlers hook
6033 * in dev as the system will start throwing WX requests
6034 * to us before we're actually initialized and it just
6035 * ends up causing problems. So, we just handle
6036 * the WX extensions through the ipw2100_ioctl interface */
6038 /* memset() puts everything to 0, so we only have explicitely set
6039 * those values that need to be something else */
6041 /* If power management is turned on, default to AUTO mode */
6042 priv->power_mode = IPW_POWER_AUTO;
6044 #ifdef CONFIG_IPW2100_MONITOR
6045 priv->config |= CFG_CRC_CHECK;
6046 #endif
6047 priv->ieee->wpa_enabled = 0;
6048 priv->ieee->drop_unencrypted = 0;
6049 priv->ieee->privacy_invoked = 0;
6050 priv->ieee->ieee802_1x = 1;
6052 /* Set module parameters */
6053 switch (mode) {
6054 case 1:
6055 priv->ieee->iw_mode = IW_MODE_ADHOC;
6056 break;
6057 #ifdef CONFIG_IPW2100_MONITOR
6058 case 2:
6059 priv->ieee->iw_mode = IW_MODE_MONITOR;
6060 break;
6061 #endif
6062 default:
6063 case 0:
6064 priv->ieee->iw_mode = IW_MODE_INFRA;
6065 break;
6068 if (disable == 1)
6069 priv->status |= STATUS_RF_KILL_SW;
6071 if (channel != 0 &&
6072 ((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) {
6073 priv->config |= CFG_STATIC_CHANNEL;
6074 priv->channel = channel;
6077 if (associate)
6078 priv->config |= CFG_ASSOCIATE;
6080 priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
6081 priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
6082 priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
6083 priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
6084 priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
6085 priv->tx_power = IPW_TX_POWER_DEFAULT;
6086 priv->tx_rates = DEFAULT_TX_RATES;
6088 strcpy(priv->nick, "ipw2100");
6090 spin_lock_init(&priv->low_lock);
6091 mutex_init(&priv->action_mutex);
6092 mutex_init(&priv->adapter_mutex);
6094 init_waitqueue_head(&priv->wait_command_queue);
6096 netif_carrier_off(dev);
6098 INIT_LIST_HEAD(&priv->msg_free_list);
6099 INIT_LIST_HEAD(&priv->msg_pend_list);
6100 INIT_STAT(&priv->msg_free_stat);
6101 INIT_STAT(&priv->msg_pend_stat);
6103 INIT_LIST_HEAD(&priv->tx_free_list);
6104 INIT_LIST_HEAD(&priv->tx_pend_list);
6105 INIT_STAT(&priv->tx_free_stat);
6106 INIT_STAT(&priv->tx_pend_stat);
6108 INIT_LIST_HEAD(&priv->fw_pend_list);
6109 INIT_STAT(&priv->fw_pend_stat);
6111 priv->workqueue = create_workqueue(DRV_NAME);
6113 INIT_WORK(&priv->reset_work,
6114 (void (*)(void *))ipw2100_reset_adapter, priv);
6115 INIT_WORK(&priv->security_work,
6116 (void (*)(void *))ipw2100_security_work, priv);
6117 INIT_WORK(&priv->wx_event_work,
6118 (void (*)(void *))ipw2100_wx_event_work, priv);
6119 INIT_WORK(&priv->hang_check, ipw2100_hang_check, priv);
6120 INIT_WORK(&priv->rf_kill, ipw2100_rf_kill, priv);
6122 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
6123 ipw2100_irq_tasklet, (unsigned long)priv);
6125 /* NOTE: We do not start the deferred work for status checks yet */
6126 priv->stop_rf_kill = 1;
6127 priv->stop_hang_check = 1;
6129 return dev;
6132 static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
6133 const struct pci_device_id *ent)
6135 unsigned long mem_start, mem_len, mem_flags;
6136 void __iomem *base_addr = NULL;
6137 struct net_device *dev = NULL;
6138 struct ipw2100_priv *priv = NULL;
6139 int err = 0;
6140 int registered = 0;
6141 u32 val;
6143 IPW_DEBUG_INFO("enter\n");
6145 mem_start = pci_resource_start(pci_dev, 0);
6146 mem_len = pci_resource_len(pci_dev, 0);
6147 mem_flags = pci_resource_flags(pci_dev, 0);
6149 if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
6150 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6151 err = -ENODEV;
6152 goto fail;
6155 base_addr = ioremap_nocache(mem_start, mem_len);
6156 if (!base_addr) {
6157 printk(KERN_WARNING DRV_NAME
6158 "Error calling ioremap_nocache.\n");
6159 err = -EIO;
6160 goto fail;
6163 /* allocate and initialize our net_device */
6164 dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
6165 if (!dev) {
6166 printk(KERN_WARNING DRV_NAME
6167 "Error calling ipw2100_alloc_device.\n");
6168 err = -ENOMEM;
6169 goto fail;
6172 /* set up PCI mappings for device */
6173 err = pci_enable_device(pci_dev);
6174 if (err) {
6175 printk(KERN_WARNING DRV_NAME
6176 "Error calling pci_enable_device.\n");
6177 return err;
6180 priv = ieee80211_priv(dev);
6182 pci_set_master(pci_dev);
6183 pci_set_drvdata(pci_dev, priv);
6185 err = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK);
6186 if (err) {
6187 printk(KERN_WARNING DRV_NAME
6188 "Error calling pci_set_dma_mask.\n");
6189 pci_disable_device(pci_dev);
6190 return err;
6193 err = pci_request_regions(pci_dev, DRV_NAME);
6194 if (err) {
6195 printk(KERN_WARNING DRV_NAME
6196 "Error calling pci_request_regions.\n");
6197 pci_disable_device(pci_dev);
6198 return err;
6201 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6202 * PCI Tx retries from interfering with C3 CPU state */
6203 pci_read_config_dword(pci_dev, 0x40, &val);
6204 if ((val & 0x0000ff00) != 0)
6205 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6207 pci_set_power_state(pci_dev, PCI_D0);
6209 if (!ipw2100_hw_is_adapter_in_system(dev)) {
6210 printk(KERN_WARNING DRV_NAME
6211 "Device not found via register read.\n");
6212 err = -ENODEV;
6213 goto fail;
6216 SET_NETDEV_DEV(dev, &pci_dev->dev);
6218 /* Force interrupts to be shut off on the device */
6219 priv->status |= STATUS_INT_ENABLED;
6220 ipw2100_disable_interrupts(priv);
6222 /* Allocate and initialize the Tx/Rx queues and lists */
6223 if (ipw2100_queues_allocate(priv)) {
6224 printk(KERN_WARNING DRV_NAME
6225 "Error calilng ipw2100_queues_allocate.\n");
6226 err = -ENOMEM;
6227 goto fail;
6229 ipw2100_queues_initialize(priv);
6231 err = request_irq(pci_dev->irq,
6232 ipw2100_interrupt, IRQF_SHARED, dev->name, priv);
6233 if (err) {
6234 printk(KERN_WARNING DRV_NAME
6235 "Error calling request_irq: %d.\n", pci_dev->irq);
6236 goto fail;
6238 dev->irq = pci_dev->irq;
6240 IPW_DEBUG_INFO("Attempting to register device...\n");
6242 SET_MODULE_OWNER(dev);
6244 printk(KERN_INFO DRV_NAME
6245 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6247 /* Bring up the interface. Pre 0.46, after we registered the
6248 * network device we would call ipw2100_up. This introduced a race
6249 * condition with newer hotplug configurations (network was coming
6250 * up and making calls before the device was initialized).
6252 * If we called ipw2100_up before we registered the device, then the
6253 * device name wasn't registered. So, we instead use the net_dev->init
6254 * member to call a function that then just turns and calls ipw2100_up.
6255 * net_dev->init is called after name allocation but before the
6256 * notifier chain is called */
6257 mutex_lock(&priv->action_mutex);
6258 err = register_netdev(dev);
6259 if (err) {
6260 printk(KERN_WARNING DRV_NAME
6261 "Error calling register_netdev.\n");
6262 goto fail_unlock;
6264 registered = 1;
6266 IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
6268 /* perform this after register_netdev so that dev->name is set */
6269 sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6271 /* If the RF Kill switch is disabled, go ahead and complete the
6272 * startup sequence */
6273 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6274 /* Enable the adapter - sends HOST_COMPLETE */
6275 if (ipw2100_enable_adapter(priv)) {
6276 printk(KERN_WARNING DRV_NAME
6277 ": %s: failed in call to enable adapter.\n",
6278 priv->net_dev->name);
6279 ipw2100_hw_stop_adapter(priv);
6280 err = -EIO;
6281 goto fail_unlock;
6284 /* Start a scan . . . */
6285 ipw2100_set_scan_options(priv);
6286 ipw2100_start_scan(priv);
6289 IPW_DEBUG_INFO("exit\n");
6291 priv->status |= STATUS_INITIALIZED;
6293 mutex_unlock(&priv->action_mutex);
6295 return 0;
6297 fail_unlock:
6298 mutex_unlock(&priv->action_mutex);
6300 fail:
6301 if (dev) {
6302 if (registered)
6303 unregister_netdev(dev);
6305 ipw2100_hw_stop_adapter(priv);
6307 ipw2100_disable_interrupts(priv);
6309 if (dev->irq)
6310 free_irq(dev->irq, priv);
6312 ipw2100_kill_workqueue(priv);
6314 /* These are safe to call even if they weren't allocated */
6315 ipw2100_queues_free(priv);
6316 sysfs_remove_group(&pci_dev->dev.kobj,
6317 &ipw2100_attribute_group);
6319 free_ieee80211(dev);
6320 pci_set_drvdata(pci_dev, NULL);
6323 if (base_addr)
6324 iounmap(base_addr);
6326 pci_release_regions(pci_dev);
6327 pci_disable_device(pci_dev);
6329 return err;
6332 static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
6334 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6335 struct net_device *dev;
6337 if (priv) {
6338 mutex_lock(&priv->action_mutex);
6340 priv->status &= ~STATUS_INITIALIZED;
6342 dev = priv->net_dev;
6343 sysfs_remove_group(&pci_dev->dev.kobj,
6344 &ipw2100_attribute_group);
6346 #ifdef CONFIG_PM
6347 if (ipw2100_firmware.version)
6348 ipw2100_release_firmware(priv, &ipw2100_firmware);
6349 #endif
6350 /* Take down the hardware */
6351 ipw2100_down(priv);
6353 /* Release the mutex so that the network subsystem can
6354 * complete any needed calls into the driver... */
6355 mutex_unlock(&priv->action_mutex);
6357 /* Unregister the device first - this results in close()
6358 * being called if the device is open. If we free storage
6359 * first, then close() will crash. */
6360 unregister_netdev(dev);
6362 /* ipw2100_down will ensure that there is no more pending work
6363 * in the workqueue's, so we can safely remove them now. */
6364 ipw2100_kill_workqueue(priv);
6366 ipw2100_queues_free(priv);
6368 /* Free potential debugging firmware snapshot */
6369 ipw2100_snapshot_free(priv);
6371 if (dev->irq)
6372 free_irq(dev->irq, priv);
6374 if (dev->base_addr)
6375 iounmap((void __iomem *)dev->base_addr);
6377 free_ieee80211(dev);
6380 pci_release_regions(pci_dev);
6381 pci_disable_device(pci_dev);
6383 IPW_DEBUG_INFO("exit\n");
6386 #ifdef CONFIG_PM
6387 static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
6389 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6390 struct net_device *dev = priv->net_dev;
6392 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev->name);
6394 mutex_lock(&priv->action_mutex);
6395 if (priv->status & STATUS_INITIALIZED) {
6396 /* Take down the device; powers it off, etc. */
6397 ipw2100_down(priv);
6400 /* Remove the PRESENT state of the device */
6401 netif_device_detach(dev);
6403 pci_save_state(pci_dev);
6404 pci_disable_device(pci_dev);
6405 pci_set_power_state(pci_dev, PCI_D3hot);
6407 mutex_unlock(&priv->action_mutex);
6409 return 0;
6412 static int ipw2100_resume(struct pci_dev *pci_dev)
6414 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6415 struct net_device *dev = priv->net_dev;
6416 u32 val;
6418 if (IPW2100_PM_DISABLED)
6419 return 0;
6421 mutex_lock(&priv->action_mutex);
6423 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name);
6425 pci_set_power_state(pci_dev, PCI_D0);
6426 pci_enable_device(pci_dev);
6427 pci_restore_state(pci_dev);
6430 * Suspend/Resume resets the PCI configuration space, so we have to
6431 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6432 * from interfering with C3 CPU state. pci_restore_state won't help
6433 * here since it only restores the first 64 bytes pci config header.
6435 pci_read_config_dword(pci_dev, 0x40, &val);
6436 if ((val & 0x0000ff00) != 0)
6437 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6439 /* Set the device back into the PRESENT state; this will also wake
6440 * the queue of needed */
6441 netif_device_attach(dev);
6443 /* Bring the device back up */
6444 if (!(priv->status & STATUS_RF_KILL_SW))
6445 ipw2100_up(priv, 0);
6447 mutex_unlock(&priv->action_mutex);
6449 return 0;
6451 #endif
6453 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6455 static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
6456 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6457 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6458 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6459 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6460 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6461 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6462 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6463 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6464 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6465 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6466 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6467 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6468 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6470 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6471 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6472 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6473 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6474 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6476 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6477 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6478 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6479 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6480 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6481 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6482 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6484 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6486 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6487 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6488 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6489 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6490 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6491 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6492 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6494 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6495 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6496 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6497 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6498 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6499 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6501 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6502 {0,},
6505 MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
6507 static struct pci_driver ipw2100_pci_driver = {
6508 .name = DRV_NAME,
6509 .id_table = ipw2100_pci_id_table,
6510 .probe = ipw2100_pci_init_one,
6511 .remove = __devexit_p(ipw2100_pci_remove_one),
6512 #ifdef CONFIG_PM
6513 .suspend = ipw2100_suspend,
6514 .resume = ipw2100_resume,
6515 #endif
6519 * Initialize the ipw2100 driver/module
6521 * @returns 0 if ok, < 0 errno node con error.
6523 * Note: we cannot init the /proc stuff until the PCI driver is there,
6524 * or we risk an unlikely race condition on someone accessing
6525 * uninitialized data in the PCI dev struct through /proc.
6527 static int __init ipw2100_init(void)
6529 int ret;
6531 printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
6532 printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
6534 ret = pci_module_init(&ipw2100_pci_driver);
6536 #ifdef CONFIG_IPW2100_DEBUG
6537 ipw2100_debug_level = debug;
6538 driver_create_file(&ipw2100_pci_driver.driver,
6539 &driver_attr_debug_level);
6540 #endif
6542 return ret;
6546 * Cleanup ipw2100 driver registration
6548 static void __exit ipw2100_exit(void)
6550 /* FIXME: IPG: check that we have no instances of the devices open */
6551 #ifdef CONFIG_IPW2100_DEBUG
6552 driver_remove_file(&ipw2100_pci_driver.driver,
6553 &driver_attr_debug_level);
6554 #endif
6555 pci_unregister_driver(&ipw2100_pci_driver);
6558 module_init(ipw2100_init);
6559 module_exit(ipw2100_exit);
6561 #define WEXT_USECHANNELS 1
6563 static const long ipw2100_frequencies[] = {
6564 2412, 2417, 2422, 2427,
6565 2432, 2437, 2442, 2447,
6566 2452, 2457, 2462, 2467,
6567 2472, 2484
6570 #define FREQ_COUNT (sizeof(ipw2100_frequencies) / \
6571 sizeof(ipw2100_frequencies[0]))
6573 static const long ipw2100_rates_11b[] = {
6574 1000000,
6575 2000000,
6576 5500000,
6577 11000000
6580 #define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0]))
6582 static int ipw2100_wx_get_name(struct net_device *dev,
6583 struct iw_request_info *info,
6584 union iwreq_data *wrqu, char *extra)
6587 * This can be called at any time. No action lock required
6590 struct ipw2100_priv *priv = ieee80211_priv(dev);
6591 if (!(priv->status & STATUS_ASSOCIATED))
6592 strcpy(wrqu->name, "unassociated");
6593 else
6594 snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
6596 IPW_DEBUG_WX("Name: %s\n", wrqu->name);
6597 return 0;
6600 static int ipw2100_wx_set_freq(struct net_device *dev,
6601 struct iw_request_info *info,
6602 union iwreq_data *wrqu, char *extra)
6604 struct ipw2100_priv *priv = ieee80211_priv(dev);
6605 struct iw_freq *fwrq = &wrqu->freq;
6606 int err = 0;
6608 if (priv->ieee->iw_mode == IW_MODE_INFRA)
6609 return -EOPNOTSUPP;
6611 mutex_lock(&priv->action_mutex);
6612 if (!(priv->status & STATUS_INITIALIZED)) {
6613 err = -EIO;
6614 goto done;
6617 /* if setting by freq convert to channel */
6618 if (fwrq->e == 1) {
6619 if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) {
6620 int f = fwrq->m / 100000;
6621 int c = 0;
6623 while ((c < REG_MAX_CHANNEL) &&
6624 (f != ipw2100_frequencies[c]))
6625 c++;
6627 /* hack to fall through */
6628 fwrq->e = 0;
6629 fwrq->m = c + 1;
6633 if (fwrq->e > 0 || fwrq->m > 1000) {
6634 err = -EOPNOTSUPP;
6635 goto done;
6636 } else { /* Set the channel */
6637 IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
6638 err = ipw2100_set_channel(priv, fwrq->m, 0);
6641 done:
6642 mutex_unlock(&priv->action_mutex);
6643 return err;
6646 static int ipw2100_wx_get_freq(struct net_device *dev,
6647 struct iw_request_info *info,
6648 union iwreq_data *wrqu, char *extra)
6651 * This can be called at any time. No action lock required
6654 struct ipw2100_priv *priv = ieee80211_priv(dev);
6656 wrqu->freq.e = 0;
6658 /* If we are associated, trying to associate, or have a statically
6659 * configured CHANNEL then return that; otherwise return ANY */
6660 if (priv->config & CFG_STATIC_CHANNEL ||
6661 priv->status & STATUS_ASSOCIATED)
6662 wrqu->freq.m = priv->channel;
6663 else
6664 wrqu->freq.m = 0;
6666 IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
6667 return 0;
6671 static int ipw2100_wx_set_mode(struct net_device *dev,
6672 struct iw_request_info *info,
6673 union iwreq_data *wrqu, char *extra)
6675 struct ipw2100_priv *priv = ieee80211_priv(dev);
6676 int err = 0;
6678 IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
6680 if (wrqu->mode == priv->ieee->iw_mode)
6681 return 0;
6683 mutex_lock(&priv->action_mutex);
6684 if (!(priv->status & STATUS_INITIALIZED)) {
6685 err = -EIO;
6686 goto done;
6689 switch (wrqu->mode) {
6690 #ifdef CONFIG_IPW2100_MONITOR
6691 case IW_MODE_MONITOR:
6692 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
6693 break;
6694 #endif /* CONFIG_IPW2100_MONITOR */
6695 case IW_MODE_ADHOC:
6696 err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
6697 break;
6698 case IW_MODE_INFRA:
6699 case IW_MODE_AUTO:
6700 default:
6701 err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
6702 break;
6705 done:
6706 mutex_unlock(&priv->action_mutex);
6707 return err;
6710 static int ipw2100_wx_get_mode(struct net_device *dev,
6711 struct iw_request_info *info,
6712 union iwreq_data *wrqu, char *extra)
6715 * This can be called at any time. No action lock required
6718 struct ipw2100_priv *priv = ieee80211_priv(dev);
6720 wrqu->mode = priv->ieee->iw_mode;
6721 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
6723 return 0;
6726 #define POWER_MODES 5
6728 /* Values are in microsecond */
6729 static const s32 timeout_duration[POWER_MODES] = {
6730 350000,
6731 250000,
6732 75000,
6733 37000,
6734 25000,
6737 static const s32 period_duration[POWER_MODES] = {
6738 400000,
6739 700000,
6740 1000000,
6741 1000000,
6742 1000000
6745 static int ipw2100_wx_get_range(struct net_device *dev,
6746 struct iw_request_info *info,
6747 union iwreq_data *wrqu, char *extra)
6750 * This can be called at any time. No action lock required
6753 struct ipw2100_priv *priv = ieee80211_priv(dev);
6754 struct iw_range *range = (struct iw_range *)extra;
6755 u16 val;
6756 int i, level;
6758 wrqu->data.length = sizeof(*range);
6759 memset(range, 0, sizeof(*range));
6761 /* Let's try to keep this struct in the same order as in
6762 * linux/include/wireless.h
6765 /* TODO: See what values we can set, and remove the ones we can't
6766 * set, or fill them with some default data.
6769 /* ~5 Mb/s real (802.11b) */
6770 range->throughput = 5 * 1000 * 1000;
6772 // range->sensitivity; /* signal level threshold range */
6774 range->max_qual.qual = 100;
6775 /* TODO: Find real max RSSI and stick here */
6776 range->max_qual.level = 0;
6777 range->max_qual.noise = 0;
6778 range->max_qual.updated = 7; /* Updated all three */
6780 range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
6781 /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
6782 range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
6783 range->avg_qual.noise = 0;
6784 range->avg_qual.updated = 7; /* Updated all three */
6786 range->num_bitrates = RATE_COUNT;
6788 for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
6789 range->bitrate[i] = ipw2100_rates_11b[i];
6792 range->min_rts = MIN_RTS_THRESHOLD;
6793 range->max_rts = MAX_RTS_THRESHOLD;
6794 range->min_frag = MIN_FRAG_THRESHOLD;
6795 range->max_frag = MAX_FRAG_THRESHOLD;
6797 range->min_pmp = period_duration[0]; /* Minimal PM period */
6798 range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */
6799 range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */
6800 range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */
6802 /* How to decode max/min PM period */
6803 range->pmp_flags = IW_POWER_PERIOD;
6804 /* How to decode max/min PM period */
6805 range->pmt_flags = IW_POWER_TIMEOUT;
6806 /* What PM options are supported */
6807 range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
6809 range->encoding_size[0] = 5;
6810 range->encoding_size[1] = 13; /* Different token sizes */
6811 range->num_encoding_sizes = 2; /* Number of entry in the list */
6812 range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
6813 // range->encoding_login_index; /* token index for login token */
6815 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
6816 range->txpower_capa = IW_TXPOW_DBM;
6817 range->num_txpower = IW_MAX_TXPOWER;
6818 for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16);
6819 i < IW_MAX_TXPOWER;
6820 i++, level -=
6821 ((IPW_TX_POWER_MAX_DBM -
6822 IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1))
6823 range->txpower[i] = level / 16;
6824 } else {
6825 range->txpower_capa = 0;
6826 range->num_txpower = 0;
6829 /* Set the Wireless Extension versions */
6830 range->we_version_compiled = WIRELESS_EXT;
6831 range->we_version_source = 18;
6833 // range->retry_capa; /* What retry options are supported */
6834 // range->retry_flags; /* How to decode max/min retry limit */
6835 // range->r_time_flags; /* How to decode max/min retry life */
6836 // range->min_retry; /* Minimal number of retries */
6837 // range->max_retry; /* Maximal number of retries */
6838 // range->min_r_time; /* Minimal retry lifetime */
6839 // range->max_r_time; /* Maximal retry lifetime */
6841 range->num_channels = FREQ_COUNT;
6843 val = 0;
6844 for (i = 0; i < FREQ_COUNT; i++) {
6845 // TODO: Include only legal frequencies for some countries
6846 // if (local->channel_mask & (1 << i)) {
6847 range->freq[val].i = i + 1;
6848 range->freq[val].m = ipw2100_frequencies[i] * 100000;
6849 range->freq[val].e = 1;
6850 val++;
6851 // }
6852 if (val == IW_MAX_FREQUENCIES)
6853 break;
6855 range->num_frequency = val;
6857 /* Event capability (kernel + driver) */
6858 range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
6859 IW_EVENT_CAPA_MASK(SIOCGIWAP));
6860 range->event_capa[1] = IW_EVENT_CAPA_K_1;
6862 range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
6863 IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
6865 IPW_DEBUG_WX("GET Range\n");
6867 return 0;
6870 static int ipw2100_wx_set_wap(struct net_device *dev,
6871 struct iw_request_info *info,
6872 union iwreq_data *wrqu, char *extra)
6874 struct ipw2100_priv *priv = ieee80211_priv(dev);
6875 int err = 0;
6877 static const unsigned char any[] = {
6878 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
6880 static const unsigned char off[] = {
6881 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6884 // sanity checks
6885 if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
6886 return -EINVAL;
6888 mutex_lock(&priv->action_mutex);
6889 if (!(priv->status & STATUS_INITIALIZED)) {
6890 err = -EIO;
6891 goto done;
6894 if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
6895 !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
6896 /* we disable mandatory BSSID association */
6897 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6898 priv->config &= ~CFG_STATIC_BSSID;
6899 err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
6900 goto done;
6903 priv->config |= CFG_STATIC_BSSID;
6904 memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
6906 err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
6908 IPW_DEBUG_WX("SET BSSID -> %02X:%02X:%02X:%02X:%02X:%02X\n",
6909 wrqu->ap_addr.sa_data[0] & 0xff,
6910 wrqu->ap_addr.sa_data[1] & 0xff,
6911 wrqu->ap_addr.sa_data[2] & 0xff,
6912 wrqu->ap_addr.sa_data[3] & 0xff,
6913 wrqu->ap_addr.sa_data[4] & 0xff,
6914 wrqu->ap_addr.sa_data[5] & 0xff);
6916 done:
6917 mutex_unlock(&priv->action_mutex);
6918 return err;
6921 static int ipw2100_wx_get_wap(struct net_device *dev,
6922 struct iw_request_info *info,
6923 union iwreq_data *wrqu, char *extra)
6926 * This can be called at any time. No action lock required
6929 struct ipw2100_priv *priv = ieee80211_priv(dev);
6931 /* If we are associated, trying to associate, or have a statically
6932 * configured BSSID then return that; otherwise return ANY */
6933 if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) {
6934 wrqu->ap_addr.sa_family = ARPHRD_ETHER;
6935 memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN);
6936 } else
6937 memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
6939 IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n",
6940 MAC_ARG(wrqu->ap_addr.sa_data));
6941 return 0;
6944 static int ipw2100_wx_set_essid(struct net_device *dev,
6945 struct iw_request_info *info,
6946 union iwreq_data *wrqu, char *extra)
6948 struct ipw2100_priv *priv = ieee80211_priv(dev);
6949 char *essid = ""; /* ANY */
6950 int length = 0;
6951 int err = 0;
6953 mutex_lock(&priv->action_mutex);
6954 if (!(priv->status & STATUS_INITIALIZED)) {
6955 err = -EIO;
6956 goto done;
6959 if (wrqu->essid.flags && wrqu->essid.length) {
6960 length = wrqu->essid.length - 1;
6961 essid = extra;
6964 if (length == 0) {
6965 IPW_DEBUG_WX("Setting ESSID to ANY\n");
6966 priv->config &= ~CFG_STATIC_ESSID;
6967 err = ipw2100_set_essid(priv, NULL, 0, 0);
6968 goto done;
6971 length = min(length, IW_ESSID_MAX_SIZE);
6973 priv->config |= CFG_STATIC_ESSID;
6975 if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
6976 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
6977 err = 0;
6978 goto done;
6981 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length),
6982 length);
6984 priv->essid_len = length;
6985 memcpy(priv->essid, essid, priv->essid_len);
6987 err = ipw2100_set_essid(priv, essid, length, 0);
6989 done:
6990 mutex_unlock(&priv->action_mutex);
6991 return err;
6994 static int ipw2100_wx_get_essid(struct net_device *dev,
6995 struct iw_request_info *info,
6996 union iwreq_data *wrqu, char *extra)
6999 * This can be called at any time. No action lock required
7002 struct ipw2100_priv *priv = ieee80211_priv(dev);
7004 /* If we are associated, trying to associate, or have a statically
7005 * configured ESSID then return that; otherwise return ANY */
7006 if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) {
7007 IPW_DEBUG_WX("Getting essid: '%s'\n",
7008 escape_essid(priv->essid, priv->essid_len));
7009 memcpy(extra, priv->essid, priv->essid_len);
7010 wrqu->essid.length = priv->essid_len;
7011 wrqu->essid.flags = 1; /* active */
7012 } else {
7013 IPW_DEBUG_WX("Getting essid: ANY\n");
7014 wrqu->essid.length = 0;
7015 wrqu->essid.flags = 0; /* active */
7018 return 0;
7021 static int ipw2100_wx_set_nick(struct net_device *dev,
7022 struct iw_request_info *info,
7023 union iwreq_data *wrqu, char *extra)
7026 * This can be called at any time. No action lock required
7029 struct ipw2100_priv *priv = ieee80211_priv(dev);
7031 if (wrqu->data.length > IW_ESSID_MAX_SIZE)
7032 return -E2BIG;
7034 wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
7035 memset(priv->nick, 0, sizeof(priv->nick));
7036 memcpy(priv->nick, extra, wrqu->data.length);
7038 IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
7040 return 0;
7043 static int ipw2100_wx_get_nick(struct net_device *dev,
7044 struct iw_request_info *info,
7045 union iwreq_data *wrqu, char *extra)
7048 * This can be called at any time. No action lock required
7051 struct ipw2100_priv *priv = ieee80211_priv(dev);
7053 wrqu->data.length = strlen(priv->nick) + 1;
7054 memcpy(extra, priv->nick, wrqu->data.length);
7055 wrqu->data.flags = 1; /* active */
7057 IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
7059 return 0;
7062 static int ipw2100_wx_set_rate(struct net_device *dev,
7063 struct iw_request_info *info,
7064 union iwreq_data *wrqu, char *extra)
7066 struct ipw2100_priv *priv = ieee80211_priv(dev);
7067 u32 target_rate = wrqu->bitrate.value;
7068 u32 rate;
7069 int err = 0;
7071 mutex_lock(&priv->action_mutex);
7072 if (!(priv->status & STATUS_INITIALIZED)) {
7073 err = -EIO;
7074 goto done;
7077 rate = 0;
7079 if (target_rate == 1000000 ||
7080 (!wrqu->bitrate.fixed && target_rate > 1000000))
7081 rate |= TX_RATE_1_MBIT;
7082 if (target_rate == 2000000 ||
7083 (!wrqu->bitrate.fixed && target_rate > 2000000))
7084 rate |= TX_RATE_2_MBIT;
7085 if (target_rate == 5500000 ||
7086 (!wrqu->bitrate.fixed && target_rate > 5500000))
7087 rate |= TX_RATE_5_5_MBIT;
7088 if (target_rate == 11000000 ||
7089 (!wrqu->bitrate.fixed && target_rate > 11000000))
7090 rate |= TX_RATE_11_MBIT;
7091 if (rate == 0)
7092 rate = DEFAULT_TX_RATES;
7094 err = ipw2100_set_tx_rates(priv, rate, 0);
7096 IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
7097 done:
7098 mutex_unlock(&priv->action_mutex);
7099 return err;
7102 static int ipw2100_wx_get_rate(struct net_device *dev,
7103 struct iw_request_info *info,
7104 union iwreq_data *wrqu, char *extra)
7106 struct ipw2100_priv *priv = ieee80211_priv(dev);
7107 int val;
7108 int len = sizeof(val);
7109 int err = 0;
7111 if (!(priv->status & STATUS_ENABLED) ||
7112 priv->status & STATUS_RF_KILL_MASK ||
7113 !(priv->status & STATUS_ASSOCIATED)) {
7114 wrqu->bitrate.value = 0;
7115 return 0;
7118 mutex_lock(&priv->action_mutex);
7119 if (!(priv->status & STATUS_INITIALIZED)) {
7120 err = -EIO;
7121 goto done;
7124 err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
7125 if (err) {
7126 IPW_DEBUG_WX("failed querying ordinals.\n");
7127 return err;
7130 switch (val & TX_RATE_MASK) {
7131 case TX_RATE_1_MBIT:
7132 wrqu->bitrate.value = 1000000;
7133 break;
7134 case TX_RATE_2_MBIT:
7135 wrqu->bitrate.value = 2000000;
7136 break;
7137 case TX_RATE_5_5_MBIT:
7138 wrqu->bitrate.value = 5500000;
7139 break;
7140 case TX_RATE_11_MBIT:
7141 wrqu->bitrate.value = 11000000;
7142 break;
7143 default:
7144 wrqu->bitrate.value = 0;
7147 IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
7149 done:
7150 mutex_unlock(&priv->action_mutex);
7151 return err;
7154 static int ipw2100_wx_set_rts(struct net_device *dev,
7155 struct iw_request_info *info,
7156 union iwreq_data *wrqu, char *extra)
7158 struct ipw2100_priv *priv = ieee80211_priv(dev);
7159 int value, err;
7161 /* Auto RTS not yet supported */
7162 if (wrqu->rts.fixed == 0)
7163 return -EINVAL;
7165 mutex_lock(&priv->action_mutex);
7166 if (!(priv->status & STATUS_INITIALIZED)) {
7167 err = -EIO;
7168 goto done;
7171 if (wrqu->rts.disabled)
7172 value = priv->rts_threshold | RTS_DISABLED;
7173 else {
7174 if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) {
7175 err = -EINVAL;
7176 goto done;
7178 value = wrqu->rts.value;
7181 err = ipw2100_set_rts_threshold(priv, value);
7183 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
7184 done:
7185 mutex_unlock(&priv->action_mutex);
7186 return err;
7189 static int ipw2100_wx_get_rts(struct net_device *dev,
7190 struct iw_request_info *info,
7191 union iwreq_data *wrqu, char *extra)
7194 * This can be called at any time. No action lock required
7197 struct ipw2100_priv *priv = ieee80211_priv(dev);
7199 wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
7200 wrqu->rts.fixed = 1; /* no auto select */
7202 /* If RTS is set to the default value, then it is disabled */
7203 wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
7205 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
7207 return 0;
7210 static int ipw2100_wx_set_txpow(struct net_device *dev,
7211 struct iw_request_info *info,
7212 union iwreq_data *wrqu, char *extra)
7214 struct ipw2100_priv *priv = ieee80211_priv(dev);
7215 int err = 0, value;
7217 if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled))
7218 return -EINPROGRESS;
7220 if (priv->ieee->iw_mode != IW_MODE_ADHOC)
7221 return 0;
7223 if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
7224 return -EINVAL;
7226 if (wrqu->txpower.fixed == 0)
7227 value = IPW_TX_POWER_DEFAULT;
7228 else {
7229 if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
7230 wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
7231 return -EINVAL;
7233 value = wrqu->txpower.value;
7236 mutex_lock(&priv->action_mutex);
7237 if (!(priv->status & STATUS_INITIALIZED)) {
7238 err = -EIO;
7239 goto done;
7242 err = ipw2100_set_tx_power(priv, value);
7244 IPW_DEBUG_WX("SET TX Power -> %d \n", value);
7246 done:
7247 mutex_unlock(&priv->action_mutex);
7248 return err;
7251 static int ipw2100_wx_get_txpow(struct net_device *dev,
7252 struct iw_request_info *info,
7253 union iwreq_data *wrqu, char *extra)
7256 * This can be called at any time. No action lock required
7259 struct ipw2100_priv *priv = ieee80211_priv(dev);
7261 wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
7263 if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
7264 wrqu->txpower.fixed = 0;
7265 wrqu->txpower.value = IPW_TX_POWER_MAX_DBM;
7266 } else {
7267 wrqu->txpower.fixed = 1;
7268 wrqu->txpower.value = priv->tx_power;
7271 wrqu->txpower.flags = IW_TXPOW_DBM;
7273 IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->txpower.value);
7275 return 0;
7278 static int ipw2100_wx_set_frag(struct net_device *dev,
7279 struct iw_request_info *info,
7280 union iwreq_data *wrqu, char *extra)
7283 * This can be called at any time. No action lock required
7286 struct ipw2100_priv *priv = ieee80211_priv(dev);
7288 if (!wrqu->frag.fixed)
7289 return -EINVAL;
7291 if (wrqu->frag.disabled) {
7292 priv->frag_threshold |= FRAG_DISABLED;
7293 priv->ieee->fts = DEFAULT_FTS;
7294 } else {
7295 if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
7296 wrqu->frag.value > MAX_FRAG_THRESHOLD)
7297 return -EINVAL;
7299 priv->ieee->fts = wrqu->frag.value & ~0x1;
7300 priv->frag_threshold = priv->ieee->fts;
7303 IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
7305 return 0;
7308 static int ipw2100_wx_get_frag(struct net_device *dev,
7309 struct iw_request_info *info,
7310 union iwreq_data *wrqu, char *extra)
7313 * This can be called at any time. No action lock required
7316 struct ipw2100_priv *priv = ieee80211_priv(dev);
7317 wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
7318 wrqu->frag.fixed = 0; /* no auto select */
7319 wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
7321 IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
7323 return 0;
7326 static int ipw2100_wx_set_retry(struct net_device *dev,
7327 struct iw_request_info *info,
7328 union iwreq_data *wrqu, char *extra)
7330 struct ipw2100_priv *priv = ieee80211_priv(dev);
7331 int err = 0;
7333 if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled)
7334 return -EINVAL;
7336 if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
7337 return 0;
7339 mutex_lock(&priv->action_mutex);
7340 if (!(priv->status & STATUS_INITIALIZED)) {
7341 err = -EIO;
7342 goto done;
7345 if (wrqu->retry.flags & IW_RETRY_MIN) {
7346 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7347 IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
7348 wrqu->retry.value);
7349 goto done;
7352 if (wrqu->retry.flags & IW_RETRY_MAX) {
7353 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7354 IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
7355 wrqu->retry.value);
7356 goto done;
7359 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7360 if (!err)
7361 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7363 IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
7365 done:
7366 mutex_unlock(&priv->action_mutex);
7367 return err;
7370 static int ipw2100_wx_get_retry(struct net_device *dev,
7371 struct iw_request_info *info,
7372 union iwreq_data *wrqu, char *extra)
7375 * This can be called at any time. No action lock required
7378 struct ipw2100_priv *priv = ieee80211_priv(dev);
7380 wrqu->retry.disabled = 0; /* can't be disabled */
7382 if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME)
7383 return -EINVAL;
7385 if (wrqu->retry.flags & IW_RETRY_MAX) {
7386 wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
7387 wrqu->retry.value = priv->long_retry_limit;
7388 } else {
7389 wrqu->retry.flags =
7390 (priv->short_retry_limit !=
7391 priv->long_retry_limit) ?
7392 IW_RETRY_LIMIT | IW_RETRY_MIN : IW_RETRY_LIMIT;
7394 wrqu->retry.value = priv->short_retry_limit;
7397 IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
7399 return 0;
7402 static int ipw2100_wx_set_scan(struct net_device *dev,
7403 struct iw_request_info *info,
7404 union iwreq_data *wrqu, char *extra)
7406 struct ipw2100_priv *priv = ieee80211_priv(dev);
7407 int err = 0;
7409 mutex_lock(&priv->action_mutex);
7410 if (!(priv->status & STATUS_INITIALIZED)) {
7411 err = -EIO;
7412 goto done;
7415 IPW_DEBUG_WX("Initiating scan...\n");
7416 if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) {
7417 IPW_DEBUG_WX("Start scan failed.\n");
7419 /* TODO: Mark a scan as pending so when hardware initialized
7420 * a scan starts */
7423 done:
7424 mutex_unlock(&priv->action_mutex);
7425 return err;
7428 static int ipw2100_wx_get_scan(struct net_device *dev,
7429 struct iw_request_info *info,
7430 union iwreq_data *wrqu, char *extra)
7433 * This can be called at any time. No action lock required
7436 struct ipw2100_priv *priv = ieee80211_priv(dev);
7437 return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
7441 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7443 static int ipw2100_wx_set_encode(struct net_device *dev,
7444 struct iw_request_info *info,
7445 union iwreq_data *wrqu, char *key)
7448 * No check of STATUS_INITIALIZED required
7451 struct ipw2100_priv *priv = ieee80211_priv(dev);
7452 return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
7455 static int ipw2100_wx_get_encode(struct net_device *dev,
7456 struct iw_request_info *info,
7457 union iwreq_data *wrqu, char *key)
7460 * This can be called at any time. No action lock required
7463 struct ipw2100_priv *priv = ieee80211_priv(dev);
7464 return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
7467 static int ipw2100_wx_set_power(struct net_device *dev,
7468 struct iw_request_info *info,
7469 union iwreq_data *wrqu, char *extra)
7471 struct ipw2100_priv *priv = ieee80211_priv(dev);
7472 int err = 0;
7474 mutex_lock(&priv->action_mutex);
7475 if (!(priv->status & STATUS_INITIALIZED)) {
7476 err = -EIO;
7477 goto done;
7480 if (wrqu->power.disabled) {
7481 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
7482 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
7483 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7484 goto done;
7487 switch (wrqu->power.flags & IW_POWER_MODE) {
7488 case IW_POWER_ON: /* If not specified */
7489 case IW_POWER_MODE: /* If set all mask */
7490 case IW_POWER_ALL_R: /* If explicitely state all */
7491 break;
7492 default: /* Otherwise we don't support it */
7493 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7494 wrqu->power.flags);
7495 err = -EOPNOTSUPP;
7496 goto done;
7499 /* If the user hasn't specified a power management mode yet, default
7500 * to BATTERY */
7501 priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
7502 err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
7504 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode);
7506 done:
7507 mutex_unlock(&priv->action_mutex);
7508 return err;
7512 static int ipw2100_wx_get_power(struct net_device *dev,
7513 struct iw_request_info *info,
7514 union iwreq_data *wrqu, char *extra)
7517 * This can be called at any time. No action lock required
7520 struct ipw2100_priv *priv = ieee80211_priv(dev);
7522 if (!(priv->power_mode & IPW_POWER_ENABLED))
7523 wrqu->power.disabled = 1;
7524 else {
7525 wrqu->power.disabled = 0;
7526 wrqu->power.flags = 0;
7529 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
7531 return 0;
7535 * WE-18 WPA support
7538 /* SIOCSIWGENIE */
7539 static int ipw2100_wx_set_genie(struct net_device *dev,
7540 struct iw_request_info *info,
7541 union iwreq_data *wrqu, char *extra)
7544 struct ipw2100_priv *priv = ieee80211_priv(dev);
7545 struct ieee80211_device *ieee = priv->ieee;
7546 u8 *buf;
7548 if (!ieee->wpa_enabled)
7549 return -EOPNOTSUPP;
7551 if (wrqu->data.length > MAX_WPA_IE_LEN ||
7552 (wrqu->data.length && extra == NULL))
7553 return -EINVAL;
7555 if (wrqu->data.length) {
7556 buf = kmalloc(wrqu->data.length, GFP_KERNEL);
7557 if (buf == NULL)
7558 return -ENOMEM;
7560 memcpy(buf, extra, wrqu->data.length);
7561 kfree(ieee->wpa_ie);
7562 ieee->wpa_ie = buf;
7563 ieee->wpa_ie_len = wrqu->data.length;
7564 } else {
7565 kfree(ieee->wpa_ie);
7566 ieee->wpa_ie = NULL;
7567 ieee->wpa_ie_len = 0;
7570 ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
7572 return 0;
7575 /* SIOCGIWGENIE */
7576 static int ipw2100_wx_get_genie(struct net_device *dev,
7577 struct iw_request_info *info,
7578 union iwreq_data *wrqu, char *extra)
7580 struct ipw2100_priv *priv = ieee80211_priv(dev);
7581 struct ieee80211_device *ieee = priv->ieee;
7583 if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
7584 wrqu->data.length = 0;
7585 return 0;
7588 if (wrqu->data.length < ieee->wpa_ie_len)
7589 return -E2BIG;
7591 wrqu->data.length = ieee->wpa_ie_len;
7592 memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len);
7594 return 0;
7597 /* SIOCSIWAUTH */
7598 static int ipw2100_wx_set_auth(struct net_device *dev,
7599 struct iw_request_info *info,
7600 union iwreq_data *wrqu, char *extra)
7602 struct ipw2100_priv *priv = ieee80211_priv(dev);
7603 struct ieee80211_device *ieee = priv->ieee;
7604 struct iw_param *param = &wrqu->param;
7605 struct ieee80211_crypt_data *crypt;
7606 unsigned long flags;
7607 int ret = 0;
7609 switch (param->flags & IW_AUTH_INDEX) {
7610 case IW_AUTH_WPA_VERSION:
7611 case IW_AUTH_CIPHER_PAIRWISE:
7612 case IW_AUTH_CIPHER_GROUP:
7613 case IW_AUTH_KEY_MGMT:
7615 * ipw2200 does not use these parameters
7617 break;
7619 case IW_AUTH_TKIP_COUNTERMEASURES:
7620 crypt = priv->ieee->crypt[priv->ieee->tx_keyidx];
7621 if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags)
7622 break;
7624 flags = crypt->ops->get_flags(crypt->priv);
7626 if (param->value)
7627 flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7628 else
7629 flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7631 crypt->ops->set_flags(flags, crypt->priv);
7633 break;
7635 case IW_AUTH_DROP_UNENCRYPTED:{
7636 /* HACK:
7638 * wpa_supplicant calls set_wpa_enabled when the driver
7639 * is loaded and unloaded, regardless of if WPA is being
7640 * used. No other calls are made which can be used to
7641 * determine if encryption will be used or not prior to
7642 * association being expected. If encryption is not being
7643 * used, drop_unencrypted is set to false, else true -- we
7644 * can use this to determine if the CAP_PRIVACY_ON bit should
7645 * be set.
7647 struct ieee80211_security sec = {
7648 .flags = SEC_ENABLED,
7649 .enabled = param->value,
7651 priv->ieee->drop_unencrypted = param->value;
7652 /* We only change SEC_LEVEL for open mode. Others
7653 * are set by ipw_wpa_set_encryption.
7655 if (!param->value) {
7656 sec.flags |= SEC_LEVEL;
7657 sec.level = SEC_LEVEL_0;
7658 } else {
7659 sec.flags |= SEC_LEVEL;
7660 sec.level = SEC_LEVEL_1;
7662 if (priv->ieee->set_security)
7663 priv->ieee->set_security(priv->ieee->dev, &sec);
7664 break;
7667 case IW_AUTH_80211_AUTH_ALG:
7668 ret = ipw2100_wpa_set_auth_algs(priv, param->value);
7669 break;
7671 case IW_AUTH_WPA_ENABLED:
7672 ret = ipw2100_wpa_enable(priv, param->value);
7673 break;
7675 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
7676 ieee->ieee802_1x = param->value;
7677 break;
7679 //case IW_AUTH_ROAMING_CONTROL:
7680 case IW_AUTH_PRIVACY_INVOKED:
7681 ieee->privacy_invoked = param->value;
7682 break;
7684 default:
7685 return -EOPNOTSUPP;
7687 return ret;
7690 /* SIOCGIWAUTH */
7691 static int ipw2100_wx_get_auth(struct net_device *dev,
7692 struct iw_request_info *info,
7693 union iwreq_data *wrqu, char *extra)
7695 struct ipw2100_priv *priv = ieee80211_priv(dev);
7696 struct ieee80211_device *ieee = priv->ieee;
7697 struct ieee80211_crypt_data *crypt;
7698 struct iw_param *param = &wrqu->param;
7699 int ret = 0;
7701 switch (param->flags & IW_AUTH_INDEX) {
7702 case IW_AUTH_WPA_VERSION:
7703 case IW_AUTH_CIPHER_PAIRWISE:
7704 case IW_AUTH_CIPHER_GROUP:
7705 case IW_AUTH_KEY_MGMT:
7707 * wpa_supplicant will control these internally
7709 ret = -EOPNOTSUPP;
7710 break;
7712 case IW_AUTH_TKIP_COUNTERMEASURES:
7713 crypt = priv->ieee->crypt[priv->ieee->tx_keyidx];
7714 if (!crypt || !crypt->ops->get_flags) {
7715 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7716 "crypt not set!\n");
7717 break;
7720 param->value = (crypt->ops->get_flags(crypt->priv) &
7721 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0;
7723 break;
7725 case IW_AUTH_DROP_UNENCRYPTED:
7726 param->value = ieee->drop_unencrypted;
7727 break;
7729 case IW_AUTH_80211_AUTH_ALG:
7730 param->value = priv->ieee->sec.auth_mode;
7731 break;
7733 case IW_AUTH_WPA_ENABLED:
7734 param->value = ieee->wpa_enabled;
7735 break;
7737 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
7738 param->value = ieee->ieee802_1x;
7739 break;
7741 case IW_AUTH_ROAMING_CONTROL:
7742 case IW_AUTH_PRIVACY_INVOKED:
7743 param->value = ieee->privacy_invoked;
7744 break;
7746 default:
7747 return -EOPNOTSUPP;
7749 return 0;
7752 /* SIOCSIWENCODEEXT */
7753 static int ipw2100_wx_set_encodeext(struct net_device *dev,
7754 struct iw_request_info *info,
7755 union iwreq_data *wrqu, char *extra)
7757 struct ipw2100_priv *priv = ieee80211_priv(dev);
7758 return ieee80211_wx_set_encodeext(priv->ieee, info, wrqu, extra);
7761 /* SIOCGIWENCODEEXT */
7762 static int ipw2100_wx_get_encodeext(struct net_device *dev,
7763 struct iw_request_info *info,
7764 union iwreq_data *wrqu, char *extra)
7766 struct ipw2100_priv *priv = ieee80211_priv(dev);
7767 return ieee80211_wx_get_encodeext(priv->ieee, info, wrqu, extra);
7770 /* SIOCSIWMLME */
7771 static int ipw2100_wx_set_mlme(struct net_device *dev,
7772 struct iw_request_info *info,
7773 union iwreq_data *wrqu, char *extra)
7775 struct ipw2100_priv *priv = ieee80211_priv(dev);
7776 struct iw_mlme *mlme = (struct iw_mlme *)extra;
7777 u16 reason;
7779 reason = cpu_to_le16(mlme->reason_code);
7781 switch (mlme->cmd) {
7782 case IW_MLME_DEAUTH:
7783 // silently ignore
7784 break;
7786 case IW_MLME_DISASSOC:
7787 ipw2100_disassociate_bssid(priv);
7788 break;
7790 default:
7791 return -EOPNOTSUPP;
7793 return 0;
7798 * IWPRIV handlers
7801 #ifdef CONFIG_IPW2100_MONITOR
7802 static int ipw2100_wx_set_promisc(struct net_device *dev,
7803 struct iw_request_info *info,
7804 union iwreq_data *wrqu, char *extra)
7806 struct ipw2100_priv *priv = ieee80211_priv(dev);
7807 int *parms = (int *)extra;
7808 int enable = (parms[0] > 0);
7809 int err = 0;
7811 mutex_lock(&priv->action_mutex);
7812 if (!(priv->status & STATUS_INITIALIZED)) {
7813 err = -EIO;
7814 goto done;
7817 if (enable) {
7818 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
7819 err = ipw2100_set_channel(priv, parms[1], 0);
7820 goto done;
7822 priv->channel = parms[1];
7823 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
7824 } else {
7825 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
7826 err = ipw2100_switch_mode(priv, priv->last_mode);
7828 done:
7829 mutex_unlock(&priv->action_mutex);
7830 return err;
7833 static int ipw2100_wx_reset(struct net_device *dev,
7834 struct iw_request_info *info,
7835 union iwreq_data *wrqu, char *extra)
7837 struct ipw2100_priv *priv = ieee80211_priv(dev);
7838 if (priv->status & STATUS_INITIALIZED)
7839 schedule_reset(priv);
7840 return 0;
7843 #endif
7845 static int ipw2100_wx_set_powermode(struct net_device *dev,
7846 struct iw_request_info *info,
7847 union iwreq_data *wrqu, char *extra)
7849 struct ipw2100_priv *priv = ieee80211_priv(dev);
7850 int err = 0, mode = *(int *)extra;
7852 mutex_lock(&priv->action_mutex);
7853 if (!(priv->status & STATUS_INITIALIZED)) {
7854 err = -EIO;
7855 goto done;
7858 if ((mode < 1) || (mode > POWER_MODES))
7859 mode = IPW_POWER_AUTO;
7861 if (priv->power_mode != mode)
7862 err = ipw2100_set_power_mode(priv, mode);
7863 done:
7864 mutex_unlock(&priv->action_mutex);
7865 return err;
7868 #define MAX_POWER_STRING 80
7869 static int ipw2100_wx_get_powermode(struct net_device *dev,
7870 struct iw_request_info *info,
7871 union iwreq_data *wrqu, char *extra)
7874 * This can be called at any time. No action lock required
7877 struct ipw2100_priv *priv = ieee80211_priv(dev);
7878 int level = IPW_POWER_LEVEL(priv->power_mode);
7879 s32 timeout, period;
7881 if (!(priv->power_mode & IPW_POWER_ENABLED)) {
7882 snprintf(extra, MAX_POWER_STRING,
7883 "Power save level: %d (Off)", level);
7884 } else {
7885 switch (level) {
7886 case IPW_POWER_MODE_CAM:
7887 snprintf(extra, MAX_POWER_STRING,
7888 "Power save level: %d (None)", level);
7889 break;
7890 case IPW_POWER_AUTO:
7891 snprintf(extra, MAX_POWER_STRING,
7892 "Power save level: %d (Auto)", 0);
7893 break;
7894 default:
7895 timeout = timeout_duration[level - 1] / 1000;
7896 period = period_duration[level - 1] / 1000;
7897 snprintf(extra, MAX_POWER_STRING,
7898 "Power save level: %d "
7899 "(Timeout %dms, Period %dms)",
7900 level, timeout, period);
7904 wrqu->data.length = strlen(extra) + 1;
7906 return 0;
7909 static int ipw2100_wx_set_preamble(struct net_device *dev,
7910 struct iw_request_info *info,
7911 union iwreq_data *wrqu, char *extra)
7913 struct ipw2100_priv *priv = ieee80211_priv(dev);
7914 int err, mode = *(int *)extra;
7916 mutex_lock(&priv->action_mutex);
7917 if (!(priv->status & STATUS_INITIALIZED)) {
7918 err = -EIO;
7919 goto done;
7922 if (mode == 1)
7923 priv->config |= CFG_LONG_PREAMBLE;
7924 else if (mode == 0)
7925 priv->config &= ~CFG_LONG_PREAMBLE;
7926 else {
7927 err = -EINVAL;
7928 goto done;
7931 err = ipw2100_system_config(priv, 0);
7933 done:
7934 mutex_unlock(&priv->action_mutex);
7935 return err;
7938 static int ipw2100_wx_get_preamble(struct net_device *dev,
7939 struct iw_request_info *info,
7940 union iwreq_data *wrqu, char *extra)
7943 * This can be called at any time. No action lock required
7946 struct ipw2100_priv *priv = ieee80211_priv(dev);
7948 if (priv->config & CFG_LONG_PREAMBLE)
7949 snprintf(wrqu->name, IFNAMSIZ, "long (1)");
7950 else
7951 snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
7953 return 0;
7956 #ifdef CONFIG_IPW2100_MONITOR
7957 static int ipw2100_wx_set_crc_check(struct net_device *dev,
7958 struct iw_request_info *info,
7959 union iwreq_data *wrqu, char *extra)
7961 struct ipw2100_priv *priv = ieee80211_priv(dev);
7962 int err, mode = *(int *)extra;
7964 mutex_lock(&priv->action_mutex);
7965 if (!(priv->status & STATUS_INITIALIZED)) {
7966 err = -EIO;
7967 goto done;
7970 if (mode == 1)
7971 priv->config |= CFG_CRC_CHECK;
7972 else if (mode == 0)
7973 priv->config &= ~CFG_CRC_CHECK;
7974 else {
7975 err = -EINVAL;
7976 goto done;
7978 err = 0;
7980 done:
7981 mutex_unlock(&priv->action_mutex);
7982 return err;
7985 static int ipw2100_wx_get_crc_check(struct net_device *dev,
7986 struct iw_request_info *info,
7987 union iwreq_data *wrqu, char *extra)
7990 * This can be called at any time. No action lock required
7993 struct ipw2100_priv *priv = ieee80211_priv(dev);
7995 if (priv->config & CFG_CRC_CHECK)
7996 snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)");
7997 else
7998 snprintf(wrqu->name, IFNAMSIZ, "CRC ignored (0)");
8000 return 0;
8002 #endif /* CONFIG_IPW2100_MONITOR */
8004 static iw_handler ipw2100_wx_handlers[] = {
8005 NULL, /* SIOCSIWCOMMIT */
8006 ipw2100_wx_get_name, /* SIOCGIWNAME */
8007 NULL, /* SIOCSIWNWID */
8008 NULL, /* SIOCGIWNWID */
8009 ipw2100_wx_set_freq, /* SIOCSIWFREQ */
8010 ipw2100_wx_get_freq, /* SIOCGIWFREQ */
8011 ipw2100_wx_set_mode, /* SIOCSIWMODE */
8012 ipw2100_wx_get_mode, /* SIOCGIWMODE */
8013 NULL, /* SIOCSIWSENS */
8014 NULL, /* SIOCGIWSENS */
8015 NULL, /* SIOCSIWRANGE */
8016 ipw2100_wx_get_range, /* SIOCGIWRANGE */
8017 NULL, /* SIOCSIWPRIV */
8018 NULL, /* SIOCGIWPRIV */
8019 NULL, /* SIOCSIWSTATS */
8020 NULL, /* SIOCGIWSTATS */
8021 NULL, /* SIOCSIWSPY */
8022 NULL, /* SIOCGIWSPY */
8023 NULL, /* SIOCGIWTHRSPY */
8024 NULL, /* SIOCWIWTHRSPY */
8025 ipw2100_wx_set_wap, /* SIOCSIWAP */
8026 ipw2100_wx_get_wap, /* SIOCGIWAP */
8027 ipw2100_wx_set_mlme, /* SIOCSIWMLME */
8028 NULL, /* SIOCGIWAPLIST -- deprecated */
8029 ipw2100_wx_set_scan, /* SIOCSIWSCAN */
8030 ipw2100_wx_get_scan, /* SIOCGIWSCAN */
8031 ipw2100_wx_set_essid, /* SIOCSIWESSID */
8032 ipw2100_wx_get_essid, /* SIOCGIWESSID */
8033 ipw2100_wx_set_nick, /* SIOCSIWNICKN */
8034 ipw2100_wx_get_nick, /* SIOCGIWNICKN */
8035 NULL, /* -- hole -- */
8036 NULL, /* -- hole -- */
8037 ipw2100_wx_set_rate, /* SIOCSIWRATE */
8038 ipw2100_wx_get_rate, /* SIOCGIWRATE */
8039 ipw2100_wx_set_rts, /* SIOCSIWRTS */
8040 ipw2100_wx_get_rts, /* SIOCGIWRTS */
8041 ipw2100_wx_set_frag, /* SIOCSIWFRAG */
8042 ipw2100_wx_get_frag, /* SIOCGIWFRAG */
8043 ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */
8044 ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */
8045 ipw2100_wx_set_retry, /* SIOCSIWRETRY */
8046 ipw2100_wx_get_retry, /* SIOCGIWRETRY */
8047 ipw2100_wx_set_encode, /* SIOCSIWENCODE */
8048 ipw2100_wx_get_encode, /* SIOCGIWENCODE */
8049 ipw2100_wx_set_power, /* SIOCSIWPOWER */
8050 ipw2100_wx_get_power, /* SIOCGIWPOWER */
8051 NULL, /* -- hole -- */
8052 NULL, /* -- hole -- */
8053 ipw2100_wx_set_genie, /* SIOCSIWGENIE */
8054 ipw2100_wx_get_genie, /* SIOCGIWGENIE */
8055 ipw2100_wx_set_auth, /* SIOCSIWAUTH */
8056 ipw2100_wx_get_auth, /* SIOCGIWAUTH */
8057 ipw2100_wx_set_encodeext, /* SIOCSIWENCODEEXT */
8058 ipw2100_wx_get_encodeext, /* SIOCGIWENCODEEXT */
8059 NULL, /* SIOCSIWPMKSA */
8062 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8063 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8064 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8065 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8066 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8067 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8068 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8069 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8071 static const struct iw_priv_args ipw2100_private_args[] = {
8073 #ifdef CONFIG_IPW2100_MONITOR
8075 IPW2100_PRIV_SET_MONITOR,
8076 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"},
8078 IPW2100_PRIV_RESET,
8079 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"},
8080 #endif /* CONFIG_IPW2100_MONITOR */
8083 IPW2100_PRIV_SET_POWER,
8084 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"},
8086 IPW2100_PRIV_GET_POWER,
8087 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING,
8088 "get_power"},
8090 IPW2100_PRIV_SET_LONGPREAMBLE,
8091 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
8093 IPW2100_PRIV_GET_LONGPREAMBLE,
8094 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"},
8095 #ifdef CONFIG_IPW2100_MONITOR
8097 IPW2100_PRIV_SET_CRC_CHECK,
8098 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check"},
8100 IPW2100_PRIV_GET_CRC_CHECK,
8101 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check"},
8102 #endif /* CONFIG_IPW2100_MONITOR */
8105 static iw_handler ipw2100_private_handler[] = {
8106 #ifdef CONFIG_IPW2100_MONITOR
8107 ipw2100_wx_set_promisc,
8108 ipw2100_wx_reset,
8109 #else /* CONFIG_IPW2100_MONITOR */
8110 NULL,
8111 NULL,
8112 #endif /* CONFIG_IPW2100_MONITOR */
8113 ipw2100_wx_set_powermode,
8114 ipw2100_wx_get_powermode,
8115 ipw2100_wx_set_preamble,
8116 ipw2100_wx_get_preamble,
8117 #ifdef CONFIG_IPW2100_MONITOR
8118 ipw2100_wx_set_crc_check,
8119 ipw2100_wx_get_crc_check,
8120 #else /* CONFIG_IPW2100_MONITOR */
8121 NULL,
8122 NULL,
8123 #endif /* CONFIG_IPW2100_MONITOR */
8127 * Get wireless statistics.
8128 * Called by /proc/net/wireless
8129 * Also called by SIOCGIWSTATS
8131 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
8133 enum {
8134 POOR = 30,
8135 FAIR = 60,
8136 GOOD = 80,
8137 VERY_GOOD = 90,
8138 EXCELLENT = 95,
8139 PERFECT = 100
8141 int rssi_qual;
8142 int tx_qual;
8143 int beacon_qual;
8145 struct ipw2100_priv *priv = ieee80211_priv(dev);
8146 struct iw_statistics *wstats;
8147 u32 rssi, quality, tx_retries, missed_beacons, tx_failures;
8148 u32 ord_len = sizeof(u32);
8150 if (!priv)
8151 return (struct iw_statistics *)NULL;
8153 wstats = &priv->wstats;
8155 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8156 * ipw2100_wx_wireless_stats seems to be called before fw is
8157 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8158 * and associated; if not associcated, the values are all meaningless
8159 * anyway, so set them all to NULL and INVALID */
8160 if (!(priv->status & STATUS_ASSOCIATED)) {
8161 wstats->miss.beacon = 0;
8162 wstats->discard.retries = 0;
8163 wstats->qual.qual = 0;
8164 wstats->qual.level = 0;
8165 wstats->qual.noise = 0;
8166 wstats->qual.updated = 7;
8167 wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
8168 IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
8169 return wstats;
8172 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
8173 &missed_beacons, &ord_len))
8174 goto fail_get_ordinal;
8176 /* If we don't have a connection the quality and level is 0 */
8177 if (!(priv->status & STATUS_ASSOCIATED)) {
8178 wstats->qual.qual = 0;
8179 wstats->qual.level = 0;
8180 } else {
8181 if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
8182 &rssi, &ord_len))
8183 goto fail_get_ordinal;
8184 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8185 if (rssi < 10)
8186 rssi_qual = rssi * POOR / 10;
8187 else if (rssi < 15)
8188 rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
8189 else if (rssi < 20)
8190 rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
8191 else if (rssi < 30)
8192 rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
8193 10 + GOOD;
8194 else
8195 rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
8196 10 + VERY_GOOD;
8198 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
8199 &tx_retries, &ord_len))
8200 goto fail_get_ordinal;
8202 if (tx_retries > 75)
8203 tx_qual = (90 - tx_retries) * POOR / 15;
8204 else if (tx_retries > 70)
8205 tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
8206 else if (tx_retries > 65)
8207 tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
8208 else if (tx_retries > 50)
8209 tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
8210 15 + GOOD;
8211 else
8212 tx_qual = (50 - tx_retries) *
8213 (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
8215 if (missed_beacons > 50)
8216 beacon_qual = (60 - missed_beacons) * POOR / 10;
8217 else if (missed_beacons > 40)
8218 beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
8219 10 + POOR;
8220 else if (missed_beacons > 32)
8221 beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
8222 18 + FAIR;
8223 else if (missed_beacons > 20)
8224 beacon_qual = (32 - missed_beacons) *
8225 (VERY_GOOD - GOOD) / 20 + GOOD;
8226 else
8227 beacon_qual = (20 - missed_beacons) *
8228 (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
8230 quality = min(beacon_qual, min(tx_qual, rssi_qual));
8232 #ifdef CONFIG_IPW2100_DEBUG
8233 if (beacon_qual == quality)
8234 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8235 else if (tx_qual == quality)
8236 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8237 else if (quality != 100)
8238 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8239 else
8240 IPW_DEBUG_WX("Quality not clamped.\n");
8241 #endif
8243 wstats->qual.qual = quality;
8244 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8247 wstats->qual.noise = 0;
8248 wstats->qual.updated = 7;
8249 wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
8251 /* FIXME: this is percent and not a # */
8252 wstats->miss.beacon = missed_beacons;
8254 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
8255 &tx_failures, &ord_len))
8256 goto fail_get_ordinal;
8257 wstats->discard.retries = tx_failures;
8259 return wstats;
8261 fail_get_ordinal:
8262 IPW_DEBUG_WX("failed querying ordinals.\n");
8264 return (struct iw_statistics *)NULL;
8267 static struct iw_handler_def ipw2100_wx_handler_def = {
8268 .standard = ipw2100_wx_handlers,
8269 .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
8270 .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
8271 .num_private_args = sizeof(ipw2100_private_args) /
8272 sizeof(struct iw_priv_args),
8273 .private = (iw_handler *) ipw2100_private_handler,
8274 .private_args = (struct iw_priv_args *)ipw2100_private_args,
8275 .get_wireless_stats = ipw2100_wx_wireless_stats,
8278 static void ipw2100_wx_event_work(struct ipw2100_priv *priv)
8280 union iwreq_data wrqu;
8281 int len = ETH_ALEN;
8283 if (priv->status & STATUS_STOPPING)
8284 return;
8286 mutex_lock(&priv->action_mutex);
8288 IPW_DEBUG_WX("enter\n");
8290 mutex_unlock(&priv->action_mutex);
8292 wrqu.ap_addr.sa_family = ARPHRD_ETHER;
8294 /* Fetch BSSID from the hardware */
8295 if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
8296 priv->status & STATUS_RF_KILL_MASK ||
8297 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
8298 &priv->bssid, &len)) {
8299 memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
8300 } else {
8301 /* We now have the BSSID, so can finish setting to the full
8302 * associated state */
8303 memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
8304 memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN);
8305 priv->status &= ~STATUS_ASSOCIATING;
8306 priv->status |= STATUS_ASSOCIATED;
8307 netif_carrier_on(priv->net_dev);
8308 netif_wake_queue(priv->net_dev);
8311 if (!(priv->status & STATUS_ASSOCIATED)) {
8312 IPW_DEBUG_WX("Configuring ESSID\n");
8313 mutex_lock(&priv->action_mutex);
8314 /* This is a disassociation event, so kick the firmware to
8315 * look for another AP */
8316 if (priv->config & CFG_STATIC_ESSID)
8317 ipw2100_set_essid(priv, priv->essid, priv->essid_len,
8319 else
8320 ipw2100_set_essid(priv, NULL, 0, 0);
8321 mutex_unlock(&priv->action_mutex);
8324 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
8327 #define IPW2100_FW_MAJOR_VERSION 1
8328 #define IPW2100_FW_MINOR_VERSION 3
8330 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8331 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8333 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8334 IPW2100_FW_MAJOR_VERSION)
8336 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8337 "." __stringify(IPW2100_FW_MINOR_VERSION)
8339 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8343 BINARY FIRMWARE HEADER FORMAT
8345 offset length desc
8346 0 2 version
8347 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8348 4 4 fw_len
8349 8 4 uc_len
8350 C fw_len firmware data
8351 12 + fw_len uc_len microcode data
8355 struct ipw2100_fw_header {
8356 short version;
8357 short mode;
8358 unsigned int fw_size;
8359 unsigned int uc_size;
8360 } __attribute__ ((packed));
8362 static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
8364 struct ipw2100_fw_header *h =
8365 (struct ipw2100_fw_header *)fw->fw_entry->data;
8367 if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
8368 printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
8369 "(detected version id of %u). "
8370 "See Documentation/networking/README.ipw2100\n",
8371 h->version);
8372 return 1;
8375 fw->version = h->version;
8376 fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
8377 fw->fw.size = h->fw_size;
8378 fw->uc.data = fw->fw.data + h->fw_size;
8379 fw->uc.size = h->uc_size;
8381 return 0;
8384 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
8385 struct ipw2100_fw *fw)
8387 char *fw_name;
8388 int rc;
8390 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8391 priv->net_dev->name);
8393 switch (priv->ieee->iw_mode) {
8394 case IW_MODE_ADHOC:
8395 fw_name = IPW2100_FW_NAME("-i");
8396 break;
8397 #ifdef CONFIG_IPW2100_MONITOR
8398 case IW_MODE_MONITOR:
8399 fw_name = IPW2100_FW_NAME("-p");
8400 break;
8401 #endif
8402 case IW_MODE_INFRA:
8403 default:
8404 fw_name = IPW2100_FW_NAME("");
8405 break;
8408 rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
8410 if (rc < 0) {
8411 printk(KERN_ERR DRV_NAME ": "
8412 "%s: Firmware '%s' not available or load failed.\n",
8413 priv->net_dev->name, fw_name);
8414 return rc;
8416 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data,
8417 fw->fw_entry->size);
8419 ipw2100_mod_firmware_load(fw);
8421 return 0;
8424 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
8425 struct ipw2100_fw *fw)
8427 fw->version = 0;
8428 if (fw->fw_entry)
8429 release_firmware(fw->fw_entry);
8430 fw->fw_entry = NULL;
8433 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
8434 size_t max)
8436 char ver[MAX_FW_VERSION_LEN];
8437 u32 len = MAX_FW_VERSION_LEN;
8438 u32 tmp;
8439 int i;
8440 /* firmware version is an ascii string (max len of 14) */
8441 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, ver, &len))
8442 return -EIO;
8443 tmp = max;
8444 if (len >= max)
8445 len = max - 1;
8446 for (i = 0; i < len; i++)
8447 buf[i] = ver[i];
8448 buf[i] = '\0';
8449 return tmp;
8452 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
8453 size_t max)
8455 u32 ver;
8456 u32 len = sizeof(ver);
8457 /* microcode version is a 32 bit integer */
8458 if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, &ver, &len))
8459 return -EIO;
8460 return snprintf(buf, max, "%08X", ver);
8464 * On exit, the firmware will have been freed from the fw list
8466 static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
8468 /* firmware is constructed of N contiguous entries, each entry is
8469 * structured as:
8471 * offset sie desc
8472 * 0 4 address to write to
8473 * 4 2 length of data run
8474 * 6 length data
8476 unsigned int addr;
8477 unsigned short len;
8479 const unsigned char *firmware_data = fw->fw.data;
8480 unsigned int firmware_data_left = fw->fw.size;
8482 while (firmware_data_left > 0) {
8483 addr = *(u32 *) (firmware_data);
8484 firmware_data += 4;
8485 firmware_data_left -= 4;
8487 len = *(u16 *) (firmware_data);
8488 firmware_data += 2;
8489 firmware_data_left -= 2;
8491 if (len > 32) {
8492 printk(KERN_ERR DRV_NAME ": "
8493 "Invalid firmware run-length of %d bytes\n",
8494 len);
8495 return -EINVAL;
8498 write_nic_memory(priv->net_dev, addr, len, firmware_data);
8499 firmware_data += len;
8500 firmware_data_left -= len;
8503 return 0;
8506 struct symbol_alive_response {
8507 u8 cmd_id;
8508 u8 seq_num;
8509 u8 ucode_rev;
8510 u8 eeprom_valid;
8511 u16 valid_flags;
8512 u8 IEEE_addr[6];
8513 u16 flags;
8514 u16 pcb_rev;
8515 u16 clock_settle_time; // 1us LSB
8516 u16 powerup_settle_time; // 1us LSB
8517 u16 hop_settle_time; // 1us LSB
8518 u8 date[3]; // month, day, year
8519 u8 time[2]; // hours, minutes
8520 u8 ucode_valid;
8523 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
8524 struct ipw2100_fw *fw)
8526 struct net_device *dev = priv->net_dev;
8527 const unsigned char *microcode_data = fw->uc.data;
8528 unsigned int microcode_data_left = fw->uc.size;
8529 void __iomem *reg = (void __iomem *)dev->base_addr;
8531 struct symbol_alive_response response;
8532 int i, j;
8533 u8 data;
8535 /* Symbol control */
8536 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8537 readl(reg);
8538 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8539 readl(reg);
8541 /* HW config */
8542 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8543 readl(reg);
8544 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8545 readl(reg);
8547 /* EN_CS_ACCESS bit to reset control store pointer */
8548 write_nic_byte(dev, 0x210000, 0x40);
8549 readl(reg);
8550 write_nic_byte(dev, 0x210000, 0x0);
8551 readl(reg);
8552 write_nic_byte(dev, 0x210000, 0x40);
8553 readl(reg);
8555 /* copy microcode from buffer into Symbol */
8557 while (microcode_data_left > 0) {
8558 write_nic_byte(dev, 0x210010, *microcode_data++);
8559 write_nic_byte(dev, 0x210010, *microcode_data++);
8560 microcode_data_left -= 2;
8563 /* EN_CS_ACCESS bit to reset the control store pointer */
8564 write_nic_byte(dev, 0x210000, 0x0);
8565 readl(reg);
8567 /* Enable System (Reg 0)
8568 * first enable causes garbage in RX FIFO */
8569 write_nic_byte(dev, 0x210000, 0x0);
8570 readl(reg);
8571 write_nic_byte(dev, 0x210000, 0x80);
8572 readl(reg);
8574 /* Reset External Baseband Reg */
8575 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8576 readl(reg);
8577 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8578 readl(reg);
8580 /* HW Config (Reg 5) */
8581 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8582 readl(reg);
8583 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8584 readl(reg);
8586 /* Enable System (Reg 0)
8587 * second enable should be OK */
8588 write_nic_byte(dev, 0x210000, 0x00); // clear enable system
8589 readl(reg);
8590 write_nic_byte(dev, 0x210000, 0x80); // set enable system
8592 /* check Symbol is enabled - upped this from 5 as it wasn't always
8593 * catching the update */
8594 for (i = 0; i < 10; i++) {
8595 udelay(10);
8597 /* check Dino is enabled bit */
8598 read_nic_byte(dev, 0x210000, &data);
8599 if (data & 0x1)
8600 break;
8603 if (i == 10) {
8604 printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
8605 dev->name);
8606 return -EIO;
8609 /* Get Symbol alive response */
8610 for (i = 0; i < 30; i++) {
8611 /* Read alive response structure */
8612 for (j = 0;
8613 j < (sizeof(struct symbol_alive_response) >> 1); j++)
8614 read_nic_word(dev, 0x210004, ((u16 *) & response) + j);
8616 if ((response.cmd_id == 1) && (response.ucode_valid == 0x1))
8617 break;
8618 udelay(10);
8621 if (i == 30) {
8622 printk(KERN_ERR DRV_NAME
8623 ": %s: No response from Symbol - hw not alive\n",
8624 dev->name);
8625 printk_buf(IPW_DL_ERROR, (u8 *) & response, sizeof(response));
8626 return -EIO;
8629 return 0;