From 9556175183ddf19e9a7afa449c259a0a5081fa29 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 15 Feb 2010 09:26:51 -0800 Subject: [PATCH] omap2/3: Make get_irqnr_and_base common for mach-omap2 multiboot Make get_irqnr_and_base common for mach-omap2 multiboot Thanks to a tip from Russell King , this also optimizes the code for non-multiboot configurations by using get_irqnr_preamble. Note that this will only work currently for 24xx and 34xx. Support for 44xx can be added later on for basic multiboot, and similar patch should be done for mach-omap1/entry-macro.S. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/include/mach/entry-macro.S | 77 +++++++++++++++++++------- 1 file changed, 57 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index c7f1720bf28..4fd6b1bdcb2 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -17,47 +17,84 @@ #include #include - -/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */ -#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430) -#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) -#elif defined(CONFIG_ARCH_OMAP34XX) -#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) -#endif -#if defined(CONFIG_ARCH_OMAP4) #include -#endif -#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ -#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm -#ifndef CONFIG_ARCH_OMAP4 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + +#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE) +#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE) +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */ +#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */ + + .pushsection .data +omap_irq_base: .word 0 + .popsection + +#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_ARCH_OMAP3) + /* Configure the interrupt base on the first interrupt */ + .macro get_irqnr_preamble, base, tmp +9: + ldr \base, =omap_irq_base @ irq base address + ldr \base, [\base, #0] @ irq base value + cmp \base, #0 @ already configured? + bne 9998f @ nothing to do + + mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision + and \tmp, \tmp, #0x000f0000 @ only check architecture + cmp \tmp, #0x00060000 @ is v6? + beq 2400f @ found v6 so it's omap24xx + cmp \tmp, #0x000f0000 @ is cortex? + beq 3400f @ found v7 so it's omap34xx +2400: ldr \base, =OMAP2_IRQ_BASE + ldr \tmp, =omap_irq_base + str \base, [\tmp, #0] + b 9b +3400: ldr \base, =OMAP3_IRQ_BASE + ldr \tmp, =omap_irq_base + str \base, [\tmp, #0] + b 9b +9998: + .endm +#else + .macro get_irqnr_preamble, base, tmp +#ifdef CONFIG_ARCH_OMAP2 + ldr \base, =OMAP2_IRQ_BASE +#else + ldr \base, =OMAP3_IRQ_BASE +#endif + .endm +#endif + /* Check the pending interrupts. Note that base already set */ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP2_VA_IC_BASE ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ cmp \irqnr, #0x0 - bne 2222f + bne 9999f ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ cmp \irqnr, #0x0 - bne 2222f + bne 9999f ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ cmp \irqnr, #0x0 -2222: +9999: ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */ .endm -#else +#endif + + +#ifdef CONFIG_ARCH_OMAP4 + #define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE) + .macro get_irqnr_preamble, base, tmp + .endm + /* * The interrupt numbering scheme is defined in the * interrupt controller spec. To wit: -- 2.11.4.GIT