?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
kmemtrace: SLOB hooks.
[linux-2.6/kmemtrace.git] / drivers / input / touchscreen / ucb1400_ts.c
blobbce018e45bce4781cb7b61519485502ff8c22171
1 /*
2 * Philips UCB1400 touchscreen driver
3 *
4 * Author: Nicolas Pitre
5 * Created: September 25, 2006
6 * Copyright: MontaVista Software, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
13 * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
14 * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
15 */
16
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/completion.h>
20 #include <linux/delay.h>
21 #include <linux/input.h>
22 #include <linux/device.h>
23 #include <linux/interrupt.h>
24 #include <linux/suspend.h>
25 #include <linux/slab.h>
26 #include <linux/kthread.h>
27 #include <linux/freezer.h>
28
29 #include <sound/core.h>
30 #include <sound/ac97_codec.h>
31
32
33 /*
34 * Interesting UCB1400 AC-link registers
35 */
36
37 #define UCB_IE_RIS 0x5e
38 #define UCB_IE_FAL 0x60
39 #define UCB_IE_STATUS 0x62
40 #define UCB_IE_CLEAR 0x62
41 #define UCB_IE_ADC (1 << 11)
42 #define UCB_IE_TSPX (1 << 12)
43
44 #define UCB_TS_CR 0x64
45 #define UCB_TS_CR_TSMX_POW (1 << 0)
46 #define UCB_TS_CR_TSPX_POW (1 << 1)
47 #define UCB_TS_CR_TSMY_POW (1 << 2)
48 #define UCB_TS_CR_TSPY_POW (1 << 3)
49 #define UCB_TS_CR_TSMX_GND (1 << 4)
50 #define UCB_TS_CR_TSPX_GND (1 << 5)
51 #define UCB_TS_CR_TSMY_GND (1 << 6)
52 #define UCB_TS_CR_TSPY_GND (1 << 7)
53 #define UCB_TS_CR_MODE_INT (0 << 8)
54 #define UCB_TS_CR_MODE_PRES (1 << 8)
55 #define UCB_TS_CR_MODE_POS (2 << 8)
56 #define UCB_TS_CR_BIAS_ENA (1 << 11)
57 #define UCB_TS_CR_TSPX_LOW (1 << 12)
58 #define UCB_TS_CR_TSMX_LOW (1 << 13)
59
60 #define UCB_ADC_CR 0x66
61 #define UCB_ADC_SYNC_ENA (1 << 0)
62 #define UCB_ADC_VREFBYP_CON (1 << 1)
63 #define UCB_ADC_INP_TSPX (0 << 2)
64 #define UCB_ADC_INP_TSMX (1 << 2)
65 #define UCB_ADC_INP_TSPY (2 << 2)
66 #define UCB_ADC_INP_TSMY (3 << 2)
67 #define UCB_ADC_INP_AD0 (4 << 2)
68 #define UCB_ADC_INP_AD1 (5 << 2)
69 #define UCB_ADC_INP_AD2 (6 << 2)
70 #define UCB_ADC_INP_AD3 (7 << 2)
71 #define UCB_ADC_EXT_REF (1 << 5)
72 #define UCB_ADC_START (1 << 7)
73 #define UCB_ADC_ENA (1 << 15)
74
75 #define UCB_ADC_DATA 0x68
76 #define UCB_ADC_DAT_VALID (1 << 15)
77 #define UCB_ADC_DAT_VALUE(x) ((x) & 0x3ff)
78
79 #define UCB_ID 0x7e
80 #define UCB_ID_1400 0x4304
81
82
83 struct ucb1400 {
84 struct snd_ac97 *ac97;
85 struct input_dev *ts_idev;
86
87 int irq;
88
89 wait_queue_head_t ts_wait;
90 struct task_struct *ts_task;
91
92 unsigned int irq_pending; /* not bit field shared */
93 unsigned int ts_restart:1;
94 unsigned int adcsync:1;
95 };
96
97 static int adcsync;
98 static int ts_delay = 55; /* us */
99 static int ts_delay_pressure; /* us */
100
101 static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg)
102 {
103 return ucb->ac97->bus->ops->read(ucb->ac97, reg);
104 }
105
106 static inline void ucb1400_reg_write(struct ucb1400 *ucb, u16 reg, u16 val)
107 {
108 ucb->ac97->bus->ops->write(ucb->ac97, reg, val);
109 }
110
111 static inline void ucb1400_adc_enable(struct ucb1400 *ucb)
112 {
113 ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
114 }
115
116 static unsigned int ucb1400_adc_read(struct ucb1400 *ucb, u16 adc_channel)
117 {
118 unsigned int val;
119
120 if (ucb->adcsync)
121 adc_channel |= UCB_ADC_SYNC_ENA;
122
123 ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
124 ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel | UCB_ADC_START);
125
126 for (;;) {
127 val = ucb1400_reg_read(ucb, UCB_ADC_DATA);
128 if (val & UCB_ADC_DAT_VALID)
129 break;
130 /* yield to other processes */
131 schedule_timeout_uninterruptible(1);
132 }
133
134 return UCB_ADC_DAT_VALUE(val);
135 }
136
137 static inline void ucb1400_adc_disable(struct ucb1400 *ucb)
138 {
139 ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
140 }
141
142 /* Switch to interrupt mode. */
143 static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
144 {
145 ucb1400_reg_write(ucb, UCB_TS_CR,
146 UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
147 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
148 UCB_TS_CR_MODE_INT);
149 }
150
151 /*
152 * Switch to pressure mode, and read pressure. We don't need to wait
153 * here, since both plates are being driven.
154 */
155 static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
156 {
157 ucb1400_reg_write(ucb, UCB_TS_CR,
158 UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
159 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
160 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
161 udelay(ts_delay_pressure);
162 return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
163 }
164
165 /*
166 * Switch to X position mode and measure Y plate. We switch the plate
167 * configuration in pressure mode, then switch to position mode. This
168 * gives a faster response time. Even so, we need to wait about 55us
169 * for things to stabilise.
170 */
171 static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
172 {
173 ucb1400_reg_write(ucb, UCB_TS_CR,
174 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
175 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
176 ucb1400_reg_write(ucb, UCB_TS_CR,
177 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
178 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
179 ucb1400_reg_write(ucb, UCB_TS_CR,
180 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
181 UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
182
183 udelay(ts_delay);
184
185 return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
186 }
187
188 /*
189 * Switch to Y position mode and measure X plate. We switch the plate
190 * configuration in pressure mode, then switch to position mode. This
191 * gives a faster response time. Even so, we need to wait about 55us
192 * for things to stabilise.
193 */
194 static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb)
195 {
196 ucb1400_reg_write(ucb, UCB_TS_CR,
197 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
198 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
199 ucb1400_reg_write(ucb, UCB_TS_CR,
200 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
201 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
202 ucb1400_reg_write(ucb, UCB_TS_CR,
203 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
204 UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
205
206 udelay(ts_delay);
207
208 return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX);
209 }
210
211 /*
212 * Switch to X plate resistance mode. Set MX to ground, PX to
213 * supply. Measure current.
214 */
215 static inline unsigned int ucb1400_ts_read_xres(struct ucb1400 *ucb)
216 {
217 ucb1400_reg_write(ucb, UCB_TS_CR,
218 UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
219 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
220 return ucb1400_adc_read(ucb, 0);
221 }
222
223 /*
224 * Switch to Y plate resistance mode. Set MY to ground, PY to
225 * supply. Measure current.
226 */
227 static inline unsigned int ucb1400_ts_read_yres(struct ucb1400 *ucb)
228 {
229 ucb1400_reg_write(ucb, UCB_TS_CR,
230 UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
231 UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
232 return ucb1400_adc_read(ucb, 0);
233 }
234
235 static inline int ucb1400_ts_pen_down(struct ucb1400 *ucb)
236 {
237 unsigned short val = ucb1400_reg_read(ucb, UCB_TS_CR);
238 return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
239 }
240
241 static inline void ucb1400_ts_irq_enable(struct ucb1400 *ucb)
242 {
243 ucb1400_reg_write(ucb, UCB_IE_CLEAR, UCB_IE_TSPX);
244 ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
245 ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_TSPX);
246 }
247
248 static inline void ucb1400_ts_irq_disable(struct ucb1400 *ucb)
249 {
250 ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
251 }
252
253 static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
254 {
255 input_report_abs(idev, ABS_X, x);
256 input_report_abs(idev, ABS_Y, y);
257 input_report_abs(idev, ABS_PRESSURE, pressure);
258 input_sync(idev);
259 }
260
261 static void ucb1400_ts_event_release(struct input_dev *idev)
262 {
263 input_report_abs(idev, ABS_PRESSURE, 0);
264 input_sync(idev);
265 }
266
267 static void ucb1400_handle_pending_irq(struct ucb1400 *ucb)
268 {
269 unsigned int isr;
270
271 isr = ucb1400_reg_read(ucb, UCB_IE_STATUS);
272 ucb1400_reg_write(ucb, UCB_IE_CLEAR, isr);
273 ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
274
275 if (isr & UCB_IE_TSPX)
276 ucb1400_ts_irq_disable(ucb);
277 else
278 printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
279
280 enable_irq(ucb->irq);
281 }
282
283 static int ucb1400_ts_thread(void *_ucb)
284 {
285 struct ucb1400 *ucb = _ucb;
286 struct task_struct *tsk = current;
287 int valid = 0;
288 struct sched_param param = { .sched_priority = 1 };
289
290 sched_setscheduler(tsk, SCHED_FIFO, &param);
291
292 set_freezable();
293 while (!kthread_should_stop()) {
294 unsigned int x, y, p;
295 long timeout;
296
297 ucb->ts_restart = 0;
298
299 if (ucb->irq_pending) {
300 ucb->irq_pending = 0;
301 ucb1400_handle_pending_irq(ucb);
302 }
303
304 ucb1400_adc_enable(ucb);
305 x = ucb1400_ts_read_xpos(ucb);
306 y = ucb1400_ts_read_ypos(ucb);
307 p = ucb1400_ts_read_pressure(ucb);
308 ucb1400_adc_disable(ucb);
309
310 /* Switch back to interrupt mode. */
311 ucb1400_ts_mode_int(ucb);
312
313 msleep(10);
314
315 if (ucb1400_ts_pen_down(ucb)) {
316 ucb1400_ts_irq_enable(ucb);
317
318 /*
319 * If we spat out a valid sample set last time,
320 * spit out a "pen off" sample here.
321 */
322 if (valid) {
323 ucb1400_ts_event_release(ucb->ts_idev);
324 valid = 0;
325 }
326
327 timeout = MAX_SCHEDULE_TIMEOUT;
328 } else {
329 valid = 1;
330 ucb1400_ts_evt_add(ucb->ts_idev, p, x, y);
331 timeout = msecs_to_jiffies(10);
332 }
333
334 wait_event_freezable_timeout(ucb->ts_wait,
335 ucb->irq_pending || ucb->ts_restart || kthread_should_stop(),
336 timeout);
337 }
338
339 /* Send the "pen off" if we are stopping with the pen still active */
340 if (valid)
341 ucb1400_ts_event_release(ucb->ts_idev);
342
343 ucb->ts_task = NULL;
344 return 0;
345 }
346
347 /*
348 * A restriction with interrupts exists when using the ucb1400, as
349 * the codec read/write routines may sleep while waiting for codec
350 * access completion and uses semaphores for access control to the
351 * AC97 bus. A complete codec read cycle could take anywhere from
352 * 60 to 100uSec so we *definitely* don't want to spin inside the
353 * interrupt handler waiting for codec access. So, we handle the
354 * interrupt by scheduling a RT kernel thread to run in process
355 * context instead of interrupt context.
356 */
357 static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
358 {
359 struct ucb1400 *ucb = devid;
360
361 if (irqnr == ucb->irq) {
362 disable_irq(ucb->irq);
363 ucb->irq_pending = 1;
364 wake_up(&ucb->ts_wait);
365 return IRQ_HANDLED;
366 }
367 return IRQ_NONE;
368 }
369
370 static int ucb1400_ts_open(struct input_dev *idev)
371 {
372 struct ucb1400 *ucb = input_get_drvdata(idev);
373 int ret = 0;
374
375 BUG_ON(ucb->ts_task);
376
377 ucb->ts_task = kthread_run(ucb1400_ts_thread, ucb, "UCB1400_ts");
378 if (IS_ERR(ucb->ts_task)) {
379 ret = PTR_ERR(ucb->ts_task);
380 ucb->ts_task = NULL;
381 }
382
383 return ret;
384 }
385
386 static void ucb1400_ts_close(struct input_dev *idev)
387 {
388 struct ucb1400 *ucb = input_get_drvdata(idev);
389
390 if (ucb->ts_task)
391 kthread_stop(ucb->ts_task);
392
393 ucb1400_ts_irq_disable(ucb);
394 ucb1400_reg_write(ucb, UCB_TS_CR, 0);
395 }
396
397 #ifdef CONFIG_PM
398 static int ucb1400_ts_resume(struct device *dev)
399 {
400 struct ucb1400 *ucb = dev_get_drvdata(dev);
401
402 if (ucb->ts_task) {
403 /*
404 * Restart the TS thread to ensure the
405 * TS interrupt mode is set up again
406 * after sleep.
407 */
408 ucb->ts_restart = 1;
409 wake_up(&ucb->ts_wait);
410 }
411 return 0;
412 }
413 #else
414 #define ucb1400_ts_resume NULL
415 #endif
416
417 #ifndef NO_IRQ
418 #define NO_IRQ 0
419 #endif
420
421 /*
422 * Try to probe our interrupt, rather than relying on lots of
423 * hard-coded machine dependencies.
424 */
425 static int ucb1400_detect_irq(struct ucb1400 *ucb)
426 {
427 unsigned long mask, timeout;
428
429 mask = probe_irq_on();
430
431 /* Enable the ADC interrupt. */
432 ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
433 ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
434 ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
435 ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
436
437 /* Cause an ADC interrupt. */
438 ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
439 ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
440
441 /* Wait for the conversion to complete. */
442 timeout = jiffies + HZ/2;
443 while (!(ucb1400_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VALID)) {
444 cpu_relax();
445 if (time_after(jiffies, timeout)) {
446 printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
447 probe_irq_off(mask);
448 return -ENODEV;
449 }
450 }
451 ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
452
453 /* Disable and clear interrupt. */
454 ucb1400_reg_write(ucb, UCB_IE_RIS, 0);
455 ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
456 ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
457 ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
458
459 /* Read triggered interrupt. */
460 ucb->irq = probe_irq_off(mask);
461 if (ucb->irq < 0 || ucb->irq == NO_IRQ)
462 return -ENODEV;
463
464 return 0;
465 }
466
467 static int ucb1400_ts_probe(struct device *dev)
468 {
469 struct ucb1400 *ucb;
470 struct input_dev *idev;
471 int error, id, x_res, y_res;
472
473 ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
474 idev = input_allocate_device();
475 if (!ucb || !idev) {
476 error = -ENOMEM;
477 goto err_free_devs;
478 }
479
480 ucb->ts_idev = idev;
481 ucb->adcsync = adcsync;
482 ucb->ac97 = to_ac97_t(dev);
483 init_waitqueue_head(&ucb->ts_wait);
484
485 id = ucb1400_reg_read(ucb, UCB_ID);
486 if (id != UCB_ID_1400) {
487 error = -ENODEV;
488 goto err_free_devs;
489 }
490
491 error = ucb1400_detect_irq(ucb);
492 if (error) {
493 printk(KERN_ERR "UCB1400: IRQ probe failed\n");
494 goto err_free_devs;
495 }
496
497 error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
498 "UCB1400", ucb);
499 if (error) {
500 printk(KERN_ERR "ucb1400: unable to grab irq%d: %d\n",
501 ucb->irq, error);
502 goto err_free_devs;
503 }
504 printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
505
506 input_set_drvdata(idev, ucb);
507
508 idev->dev.parent = dev;
509 idev->name = "UCB1400 touchscreen interface";
510 idev->id.vendor = ucb1400_reg_read(ucb, AC97_VENDOR_ID1);
511 idev->id.product = id;
512 idev->open = ucb1400_ts_open;
513 idev->close = ucb1400_ts_close;
514 idev->evbit[0] = BIT_MASK(EV_ABS);
515
516 ucb1400_adc_enable(ucb);
517 x_res = ucb1400_ts_read_xres(ucb);
518 y_res = ucb1400_ts_read_yres(ucb);
519 ucb1400_adc_disable(ucb);
520 printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
521
522 input_set_abs_params(idev, ABS_X, 0, x_res, 0, 0);
523 input_set_abs_params(idev, ABS_Y, 0, y_res, 0, 0);
524 input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
525
526 error = input_register_device(idev);
527 if (error)
528 goto err_free_irq;
529
530 dev_set_drvdata(dev, ucb);
531 return 0;
532
533 err_free_irq:
534 free_irq(ucb->irq, ucb);
535 err_free_devs:
536 input_free_device(idev);
537 kfree(ucb);
538 return error;
539 }
540
541 static int ucb1400_ts_remove(struct device *dev)
542 {
543 struct ucb1400 *ucb = dev_get_drvdata(dev);
544
545 free_irq(ucb->irq, ucb);
546 input_unregister_device(ucb->ts_idev);
547 dev_set_drvdata(dev, NULL);
548 kfree(ucb);
549 return 0;
550 }
551
552 static struct device_driver ucb1400_ts_driver = {
553 .name = "ucb1400_ts",
554 .owner = THIS_MODULE,
555 .bus = &ac97_bus_type,
556 .probe = ucb1400_ts_probe,
557 .remove = ucb1400_ts_remove,
558 .resume = ucb1400_ts_resume,
559 };
560
561 static int __init ucb1400_ts_init(void)
562 {
563 return driver_register(&ucb1400_ts_driver);
564 }
565
566 static void __exit ucb1400_ts_exit(void)
567 {
568 driver_unregister(&ucb1400_ts_driver);
569 }
570
571 module_param(adcsync, bool, 0444);
572 MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
573
574 module_param(ts_delay, int, 0444);
575 MODULE_PARM_DESC(ts_delay, "Delay between panel setup and position read. Default = 55us.");
576
577 module_param(ts_delay_pressure, int, 0444);
578 MODULE_PARM_DESC(ts_delay_pressure,
579 "delay between panel setup and pressure read. Default = 0us.");
580
581 module_init(ucb1400_ts_init);
582 module_exit(ucb1400_ts_exit);
583
584 MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
585 MODULE_LICENSE("GPL");
kmemtrace - Kernel memory tracer