From 8979cfef26a74f0df154d4e991bdafb4105af8f1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 11 Jan 2013 15:45:28 +0000 Subject: [PATCH] ARM: ux500: Provide a link from AB8500 Pinctrl to the PRCMU The AB8500 Pinctrl driver uses PRCMU register addresses to control Pinctrl related functions. For this to happen, the Pinctrl driver needs the PRCMU base to work from. We can do that using standard Open Firmware (of_*) function calls, but first we need a mechanism to gain access to the PRCMU device node. We're going to use a Phandle in this case. Signed-off-by: Lee Jones [Added reg-names="prcmu"; to the prcmu DT node] Signed-off-by: Linus Walleij --- arch/arm/boot/dts/dbx5x0.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 63f2fbcfe819..96f518b9ae2c 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -170,10 +170,9 @@ gpio-bank = <8>; }; - pinctrl@80157000 { - // This is actually the PRCMU base address - reg = <0x80157000 0x2000>; + pinctrl { compatible = "stericsson,nmk_pinctrl"; + prcm = <&prcmu>; }; usb@a03e0000 { @@ -190,9 +189,10 @@ interrupts = <0 25 0x4>; }; - prcmu@80157000 { + prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x1000>; + reg-names = "prcmu"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; -- 2.11.4.GIT