From 11e71007a5652dce2528a5d2451fe2697c6a370a Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 5 May 2015 15:17:53 +0100 Subject: [PATCH] serial: tegra: Add delay after enabling FIFO mode For all tegra devices (up to t210), there is a hardware issue that requires software to wait for 3 UART clock periods after enabling the TX fifo, otherwise data could be lost. Signed-off-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 9e08d3f07509..0d9d7ceb1dbb 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -885,6 +885,16 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B; tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); + /* Dummy read to ensure the write is posted */ + tegra_uart_read(tup, UART_SCR); + + /* + * For all tegra devices (up to t210), there is a hardware issue that + * requires software to wait for 3 UART clock periods after enabling + * the TX fifo, otherwise data could be lost. + */ + tegra_uart_wait_cycle_time(tup, 3); + /* * Initialize the UART with default configuration * (115200, N, 8, 1) so that the receive DMA buffer may be -- 2.11.4.GIT