From 0d49016bbab4fe9164710b1d4bbae116b89b7f7e Mon Sep 17 00:00:00 2001 From: adam radford Date: Tue, 14 Dec 2010 19:17:17 -0800 Subject: [PATCH] [SCSI] megaraid_sas: Rename megaraid_sas.c to megaraid_sas_base.c This patch renames megaraid_sas.c to megaraid_sas_base.c to facilitate other files in the compile. Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/megaraid/Makefile | 1 + .../{megaraid_sas.c => megaraid_sas_base.c} | 46 +++++++++++----------- 2 files changed, 24 insertions(+), 23 deletions(-) rename drivers/scsi/megaraid/{megaraid_sas.c => megaraid_sas_base.c} (99%) diff --git a/drivers/scsi/megaraid/Makefile b/drivers/scsi/megaraid/Makefile index f469915b97c..6613a2ceea0 100644 --- a/drivers/scsi/megaraid/Makefile +++ b/drivers/scsi/megaraid/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_MEGARAID_MM) += megaraid_mm.o obj-$(CONFIG_MEGARAID_MAILBOX) += megaraid_mbox.o obj-$(CONFIG_MEGARAID_SAS) += megaraid_sas.o +megaraid_sas-objs := megaraid_sas_base.o diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas_base.c similarity index 99% rename from drivers/scsi/megaraid/megaraid_sas.c rename to drivers/scsi/megaraid/megaraid_sas_base.c index 7451bc096a0..427f0f79594 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -167,7 +167,7 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd) /** -* The following functions are defined for xscale +* The following functions are defined for xscale * (deviceid : 1064R, PERC5) controllers */ @@ -210,7 +210,7 @@ megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs) * megasas_clear_interrupt_xscale - Check & clear interrupt * @regs: MFI register set */ -static int +static int megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs) { u32 status; @@ -243,7 +243,7 @@ megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs) * @frame_count : Number of frames for the command * @regs : MFI register set */ -static inline void +static inline void megasas_fire_cmd_xscale(struct megasas_instance *instance, dma_addr_t frame_phys_addr, u32 frame_count, @@ -326,12 +326,12 @@ static struct megasas_instance_template megasas_instance_template_xscale = { }; /** -* This is the end of set of functions & definitions specific +* This is the end of set of functions & definitions specific * to xscale (deviceid : 1064R, PERC5) controllers */ /** -* The following functions are defined for ppc (deviceid : 0x60) +* The following functions are defined for ppc (deviceid : 0x60) * controllers */ @@ -343,7 +343,7 @@ static inline void megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs) { writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear); - + writel(~0x80000000, &(regs)->outbound_intr_mask); /* Dummy readl to force pci flush */ @@ -377,7 +377,7 @@ megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs) * megasas_clear_interrupt_ppc - Check & clear interrupt * @regs: MFI register set */ -static int +static int megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) { u32 status; @@ -406,7 +406,7 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) * @frame_count : Number of frames for the command * @regs : MFI register set */ -static inline void +static inline void megasas_fire_cmd_ppc(struct megasas_instance *instance, dma_addr_t frame_phys_addr, u32 frame_count, @@ -414,7 +414,7 @@ megasas_fire_cmd_ppc(struct megasas_instance *instance, { unsigned long flags; spin_lock_irqsave(&instance->hba_lock, flags); - writel((frame_phys_addr | (frame_count<<1))|1, + writel((frame_phys_addr | (frame_count<<1))|1, &(regs)->inbound_queue_port); spin_unlock_irqrestore(&instance->hba_lock, flags); } @@ -441,7 +441,7 @@ megasas_check_reset_ppc(struct megasas_instance *instance, return 0; } static struct megasas_instance_template megasas_instance_template_ppc = { - + .fire_cmd = megasas_fire_cmd_ppc, .enable_intr = megasas_enable_intr_ppc, .disable_intr = megasas_disable_intr_ppc, @@ -754,7 +754,7 @@ static struct megasas_instance_template megasas_instance_template_gen2 = { /** * megasas_issue_polled - Issues a polling command * @instance: Adapter soft state - * @cmd: Command packet to be issued + * @cmd: Command packet to be issued * * For polling, MFI requires the cmd_status to be set to 0xFF before posting. */ @@ -1242,9 +1242,9 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp, /** * megasas_is_ldio - Checks if the cmd is for logical drive * @scmd: SCSI command - * + * * Called by megasas_queue_command to find out if the command to be queued - * is a logical drive command + * is a logical drive command */ static inline int megasas_is_ldio(struct scsi_cmnd *cmd) { @@ -2000,8 +2000,8 @@ megasas_complete_int_cmd(struct megasas_instance *instance, * @instance: Adapter soft state * @cmd: Cmd that was issued to abort another cmd * - * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q - * after it issues an abort on a previously issued command. This function + * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q + * after it issues an abort on a previously issued command. This function * wakes up all functions waiting on the same wait queue. */ static void @@ -2021,7 +2021,7 @@ megasas_complete_abort(struct megasas_instance *instance, * megasas_complete_cmd - Completes a command * @instance: Adapter soft state * @cmd: Command to be completed - * @alt_status: If non-zero, use this value as status to + * @alt_status: If non-zero, use this value as status to * SCSI mid-layer instead of the value returned * by the FW. This should be used if caller wants * an alternate status (as in the case of aborted @@ -2476,8 +2476,8 @@ megasas_transition_to_ready(struct megasas_instance* instance) fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK; if (fw_state != MFI_STATE_READY) - printk(KERN_INFO "megasas: Waiting for FW to come to ready" - " state\n"); + printk(KERN_INFO "megasas: Waiting for FW to come to ready" + " state\n"); while (fw_state != MFI_STATE_READY) { @@ -2590,7 +2590,7 @@ megasas_transition_to_ready(struct megasas_instance* instance) * The cur_state should not last for more than max_wait secs */ for (i = 0; i < (max_wait * 1000); i++) { - fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & + fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK ; curr_abs_state = instance->instancet->read_fw_status_reg(instance->reg_set); @@ -2610,7 +2610,7 @@ megasas_transition_to_ready(struct megasas_instance* instance) return -ENODEV; } } - printk(KERN_INFO "megasas: FW now in Ready state\n"); + printk(KERN_INFO "megasas: FW now in Ready state\n"); return 0; } @@ -3290,7 +3290,7 @@ static int megasas_init_mfi(struct megasas_instance *instance) * does not exceed max cmds that the FW can support */ instance->max_fw_cmds = instance->max_fw_cmds-1; - instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >> + instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >> 0x10; /* * Create a pool of commands @@ -3733,7 +3733,7 @@ fail_set_dma_mask: /** * megasas_probe_one - PCI hotplug entry point * @pdev: PCI device structure - * @id: PCI ids of supported hotplugged adapter + * @id: PCI ids of supported hotplugged adapter */ static int __devinit megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) @@ -5165,7 +5165,7 @@ err_dcf_attr_ver: pci_unregister_driver(&megasas_pci_driver); err_pcidrv: unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl"); - return rval; + return rval; } /** -- 2.11.4.GIT