2 tristate "Data acquisition support (comedi)"
5 Enable support a wide range of data acquisition devices
11 bool "Comedi debugging"
13 This is an option for use by developers; most people should
14 say N here. This enables comedi core and driver debugging.
16 config COMEDI_DEFAULT_BUF_SIZE_KB
17 int "Comedi default initial asynchronous buffer size in KiB"
20 This is the default asynchronous buffer size which is used for
21 commands running in the background in kernel space. This
22 defaults to 2048 KiB of memory so that a 16 channel card
23 running at 10 kHz has of 2-4 seconds of buffer.
25 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
26 int "Comedi default maximum asynchronous buffer size in KiB"
29 This is the default maximum asynchronous buffer size which can
30 be requested by a userspace program without root privileges.
31 This is set to 20480 KiB so that a fast I/O card with 16
32 channels running at 100 kHz has 2-4 seconds of buffer.
34 menuconfig COMEDI_MISC_DRIVERS
35 bool "Comedi misc drivers"
37 Enable comedi misc drivers to be built
39 Note that the answer to this question won't directly affect the
40 kernel: saying N will just cause the configurator to skip all
41 the questions about misc non-hardware comedi drivers.
43 if COMEDI_MISC_DRIVERS
45 config COMEDI_KCOMEDILIB
46 tristate "Comedi kcomedilib"
51 tristate "Device bonding support"
52 depends on COMEDI_KCOMEDILIB
54 Enable support for a driver to 'bond' (merge) multiple subdevices
55 from multiple devices together as one.
57 To compile this driver as a module, choose M here: the module will be
61 tristate "Fake waveform generator support"
64 Enable support for the fake waveform generator.
65 This driver is mainly for testing purposes, but can also be used to
66 generate sample waveforms on systems that don't have data acquisition
69 To compile this driver as a module, choose M here: the module will be
73 tristate "Parallel port support"
75 Enable support for the standard parallel port.
76 A cheap and easy way to get a few more digital I/O lines. Steal
77 additional parallel ports from old computers or your neighbors'
80 To compile this driver as a module, choose M here: the module will be
81 called comedi_parport.
83 config COMEDI_SERIAL2002
84 tristate "Driver for serial connected hardware"
86 Enable support for serial connected hardware
88 To compile this driver as a module, choose M here: the module will be
92 tristate "Comedi skeleton driver"
94 Build the Skeleton driver, an example for driver writers
96 To compile this driver as a module, choose M here: the module will be
99 endif # COMEDI_MISC_DRIVERS
101 menuconfig COMEDI_ISA_DRIVERS
102 bool "Comedi ISA and PC/104 drivers"
105 Enable comedi ISA and PC/104 drivers to be built
107 Note that the answer to this question won't directly affect the
108 kernel: saying N will just cause the configurator to skip all
109 the questions about ISA and PC/104 comedi drivers.
111 if COMEDI_ISA_DRIVERS
114 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
116 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
118 To compile this driver as a module, choose M here: the module will be
122 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
125 Enable support for Advantech PCL-724, PCL-722, PCL-731 and
126 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
128 To compile this driver as a module, choose M here: the module will be
132 tristate "Advantech PCL-726 and compatible ISA card support"
134 Enable support for Advantech PCL-726 and compatible ISA cards.
136 To compile this driver as a module, choose M here: the module will be
140 tristate "Simple Digital I/O board support (8-bit ports)"
142 Enable support for various simple ISA or PC/104 Digital I/O boards.
143 These boards all use 8-bit I/O ports.
145 Advantech PCL-730 isolated - 16 in/16 out ttl - 16 in/16 out
146 ICP ISO-730 isolated - 16 in/16 out ttl - 16 in/16 out
147 ADlink ACL-7130 isolated - 16 in/16 out ttl - 16 in/16 out
148 Advantech PCM-3730 isolated - 8 in/8 out ttl - 16 in/16 out
149 Advantech PCL-725 isolated - 8 in/8 out
150 ICP P8R8-DIO isolated - 8 in/8 out
151 ADlink ACL-7225b isolated - 16 in/16 out
152 ICP P16R16-DIO isolated - 16 in/16 out
153 Advantech PCL-733 isolated - 32 in
154 Advantech PCL-734 isolated - 32 out
156 To compile this driver as a module, choose M here: the module will be
160 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
161 depends on VIRT_TO_BUS && ISA_DMA_API
163 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
164 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
165 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
167 To compile this driver as a module, choose M here: the module will be
171 tristate "Advantech PCL-814 and PCL-816 ISA card support"
172 depends on VIRT_TO_BUS && ISA_DMA_API
174 Enable support for Advantech PCL-814 and PCL-816 ISA cards
176 To compile this driver as a module, choose M here: the module will be
180 tristate "Advantech PCL-718 and PCL-818 ISA card support"
181 depends on VIRT_TO_BUS && ISA_DMA_API
183 Enable support for Advantech PCL-818 ISA cards
184 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
186 To compile this driver as a module, choose M here: the module will be
189 config COMEDI_PCM3724
190 tristate "Advantech PCM-3724 PC/104 card support"
193 Enable support for Advantech PCM-3724 PC/104 cards.
195 To compile this driver as a module, choose M here: the module will be
198 config COMEDI_AMPLC_DIO200_ISA
199 tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
200 select COMEDI_AMPLC_DIO200
202 Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
203 PC272E ISA DIO boards
205 To compile this driver as a module, choose M here: the module will be
208 config COMEDI_AMPLC_PC236_ISA
209 tristate "Amplicon PC36AT DIO board support"
210 select COMEDI_AMPLC_PC236
212 Enable support for Amplicon PC36AT ISA DIO board.
214 To compile this driver as a module, choose M here: the module will be
217 config COMEDI_AMPLC_PC263_ISA
218 tristate "Amplicon PC263 relay board support"
220 Enable support for Amplicon PC263 ISA relay board. This board has
221 16 reed relay output channels.
223 To compile this driver as a module, choose M here: the module will be
227 tristate "Analog Devices RTI-800/815 ISA card support"
229 Enable support for Analog Devices RTI-800/815 ISA cards
231 To compile this driver as a module, choose M here: the module will be
235 tristate "Analog Devices RTI-802 ISA card support"
237 Enable support for Analog Devices RTI-802 ISA cards
239 To compile this driver as a module, choose M here: the module will be
242 config COMEDI_DAS16M1
243 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
247 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
249 To compile this driver as a module, choose M here: the module will be
252 config COMEDI_DAS08_ISA
253 tristate "DAS-08 compatible ISA and PC/104 card support"
256 Enable support for Keithley Metrabyte/ComputerBoards DAS08
257 and compatible ISA and PC/104 cards:
258 Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
259 DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
260 DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
262 To compile this driver as a module, choose M here: the module will be
266 tristate "DAS-16 compatible ISA and PC/104 card support"
267 depends on ISA_DMA_API
271 Enable support for Keithley Metrabyte/ComputerBoards DAS16
272 and compatible ISA and PC/104 cards:
273 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
274 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
275 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
276 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
277 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
278 CIO-DAS1602/16, CIO-DAS16/330
280 To compile this driver as a module, choose M here: the module will be
284 tristate "DAS800 and compatible ISA card support"
287 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
288 Keithley Metrabyte DAS-800, DAS-801, DAS-802
289 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
292 To compile this driver as a module, choose M here: the module will be
295 config COMEDI_DAS1800
296 tristate "DAS1800 and compatible ISA card support"
297 depends on VIRT_TO_BUS && ISA_DMA_API
300 Enable support for DAS1800 and compatible ISA cards
301 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
302 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
303 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
304 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
307 To compile this driver as a module, choose M here: the module will be
310 config COMEDI_DAS6402
311 tristate "DAS6402 and compatible ISA card support"
313 Enable support for DAS6402 and compatible ISA cards
314 Computerboards, Keithley Metrabyte DAS6402 and compatibles
316 To compile this driver as a module, choose M here: the module will be
320 tristate "Data Translation DT2801 ISA card support"
322 Enable support for Data Translation DT2801 ISA cards
324 To compile this driver as a module, choose M here: the module will be
328 tristate "Data Translation DT2811 ISA card support"
330 Enable support for Data Translation DT2811 ISA cards
332 To compile this driver as a module, choose M here: the module will be
336 tristate "Data Translation DT2814 ISA card support"
338 Enable support for Data Translation DT2814 ISA cards
340 To compile this driver as a module, choose M here: the module will be
344 tristate "Data Translation DT2815 ISA card support"
346 Enable support for Data Translation DT2815 ISA cards
348 To compile this driver as a module, choose M here: the module will be
352 tristate "Data Translation DT2817 ISA card support"
354 Enable support for Data Translation DT2817 ISA cards
356 To compile this driver as a module, choose M here: the module will be
360 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
362 depends on VIRT_TO_BUS && ISA_DMA_API
364 Enable support for Data Translation DT2821 series including DT-EZ
365 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
366 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
367 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
369 To compile this driver as a module, choose M here: the module will be
372 config COMEDI_DMM32AT
373 tristate "Diamond Systems MM-32-AT PC/104 board support"
375 Enable support for Diamond Systems MM-32-AT PC/104 boards
377 To compile this driver as a module, choose M here: the module will be
381 tristate "FL512 ISA card support"
383 Enable support for FL512 ISA card
385 To compile this driver as a module, choose M here: the module will be
388 config COMEDI_AIO_AIO12_8
389 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
392 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
394 To compile this driver as a module, choose M here: the module will be
397 config COMEDI_AIO_IIRO_16
398 tristate "I/O Products PC/104 IIRO16 Board support"
400 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
403 To compile this driver as a module, choose M here: the module will be
406 config COMEDI_C6XDIGIO
407 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
409 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
412 To compile this driver as a module, choose M here: the module will be
416 tristate "Micro/sys MPC-624 PC/104 board support"
418 Enable support for Micro/sys MPC-624 PC/104 board
420 To compile this driver as a module, choose M here: the module will be
424 tristate "MicroAxial ADQ12-B data acquisition and control card support"
426 Enable MicroAxial ADQ12-B daq and control card support.
428 To compile this driver as a module, choose M here: the module will be
431 config COMEDI_NI_AT_A2150
432 tristate "NI AT-A2150 ISA card support"
434 depends on VIRT_TO_BUS && ISA_DMA_API
436 Enable support for National Instruments AT-A2150 cards
438 To compile this driver as a module, choose M here: the module will be
441 config COMEDI_NI_AT_AO
442 tristate "NI AT-AO-6/10 EISA card support"
444 Enable support for National Instruments AT-AO-6/10 cards
446 To compile this driver as a module, choose M here: the module will be
449 config COMEDI_NI_ATMIO
450 tristate "NI AT-MIO E series ISA-PNP card support"
455 Enable support for National Instruments AT-MIO E series cards
456 National Instruments AT-MIO-16E-1 (ni_atmio),
457 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
458 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
460 To compile this driver as a module, choose M here: the module will be
463 config COMEDI_NI_ATMIO16D
464 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
468 Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
470 To compile this driver as a module, choose M here: the module will be
473 config COMEDI_NI_LABPC_ISA
474 tristate "NI Lab-PC and compatibles ISA support"
475 select COMEDI_NI_LABPC
476 depends on VIRT_TO_BUS
478 Enable support for National Instruments Lab-PC and compatibles
479 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
480 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
481 not yet been added to the driver.
483 To compile this driver as a module, choose M here: the module will be
487 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
489 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
491 To compile this driver as a module, choose M here: the module will be
494 config COMEDI_PCMDA12
495 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
497 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
498 Note that the board is not ISA-PNP capable and thus needs the I/O
499 port comedi_config parameter.
501 To compile this driver as a module, choose M here: the module will be
505 tristate "Winsystems PCM-MIO PC/104 board support"
507 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
509 To compile this driver as a module, choose M here: the module will be
513 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
515 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
517 To compile this driver as a module, choose M here: the module will be
520 config COMEDI_MULTIQ3
521 tristate "Quanser Consulting MultiQ-3 ISA card support"
523 Enable support for Quanser Consulting MultiQ-3 ISA cards
525 To compile this driver as a module, choose M here: the module will be
529 tristate "Generic driver for very simple devices"
531 Enable generic support for very simple / POC (Piece of Crap) boards,
532 Keithley Metrabyte DAC-02 (dac02).
534 To compile this driver as a module, choose M here: the module will be
538 tristate "Sensoray s526 support"
540 Enable support for Sensoray s526
542 To compile this driver as a module, choose M here: the module will be
545 endif # COMEDI_ISA_DRIVERS
547 menuconfig COMEDI_PCI_DRIVERS
548 bool "Comedi PCI drivers"
551 Enable support for comedi PCI drivers.
553 if COMEDI_PCI_DRIVERS
555 config COMEDI_8255_PCI
556 tristate "Generic PCI based 8255 digital i/o board support"
559 Enable support for PCI based 8255 digital i/o boards. This driver
560 provides a PCI wrapper around the generic 8255 driver.
563 ADlink - PCI-7224, PCI-7248, and PCI-7296
564 Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
566 National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
567 PCI-6503B, PCI-6503X, and PXI-6503
569 To compile this driver as a module, choose M here: the module will
572 config COMEDI_ADDI_WATCHDOG
575 Provides support for the watchdog subdevice found on many ADDI-DATA
576 boards. This module will be automatically selected when needed. The
577 module will be called addi_watchdog.
579 config COMEDI_ADDI_APCI_035
580 tristate "ADDI-DATA APCI_035 support"
582 Enable support for ADDI-DATA APCI_035 cards
584 To compile this driver as a module, choose M here: the module will be
585 called addi_apci_035.
587 config COMEDI_ADDI_APCI_1032
588 tristate "ADDI-DATA APCI_1032 support"
590 Enable support for ADDI-DATA APCI_1032 cards
592 To compile this driver as a module, choose M here: the module will be
593 called addi_apci_1032.
595 config COMEDI_ADDI_APCI_1500
596 tristate "ADDI-DATA APCI_1500 support"
598 Enable support for ADDI-DATA APCI_1500 cards
600 To compile this driver as a module, choose M here: the module will be
601 called addi_apci_1500.
603 config COMEDI_ADDI_APCI_1516
604 tristate "ADDI-DATA APCI-1016/1516/2016 support"
605 select COMEDI_ADDI_WATCHDOG
607 Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
608 These are 16 channel, optically isolated, digital I/O boards. The 1516
609 and 2016 boards also have a watchdog for resetting the outputs to "0".
611 To compile this driver as a module, choose M here: the module will be
612 called addi_apci_1516.
614 config COMEDI_ADDI_APCI_1564
615 tristate "ADDI-DATA APCI_1564 support"
617 Enable support for ADDI-DATA APCI_1564 cards
619 To compile this driver as a module, choose M here: the module will be
620 called addi_apci_1564.
622 config COMEDI_ADDI_APCI_16XX
623 tristate "ADDI-DATA APCI_16xx support"
625 Enable support for ADDI-DATA APCI_16xx cards
627 To compile this driver as a module, choose M here: the module will be
628 called addi_apci_16xx.
630 config COMEDI_ADDI_APCI_2032
631 tristate "ADDI-DATA APCI_2032 support"
632 select COMEDI_ADDI_WATCHDOG
634 Enable support for ADDI-DATA APCI_2032 cards
636 To compile this driver as a module, choose M here: the module will be
637 called addi_apci_2032.
639 config COMEDI_ADDI_APCI_2200
640 tristate "ADDI-DATA APCI_2200 support"
641 select COMEDI_ADDI_WATCHDOG
643 Enable support for ADDI-DATA APCI_2200 cards
645 To compile this driver as a module, choose M here: the module will be
646 called addi_apci_2200.
648 config COMEDI_ADDI_APCI_3120
649 tristate "ADDI-DATA APCI_3120/3001 support"
650 depends on VIRT_TO_BUS
653 Enable support for ADDI-DATA APCI_3120/3001 cards
655 To compile this driver as a module, choose M here: the module will be
656 called addi_apci_3120.
658 config COMEDI_ADDI_APCI_3501
659 tristate "ADDI-DATA APCI_3501 support"
661 Enable support for ADDI-DATA APCI_3501 cards
663 To compile this driver as a module, choose M here: the module will be
664 called addi_apci_3501.
666 config COMEDI_ADDI_APCI_3XXX
667 tristate "ADDI-DATA APCI_3xxx support"
669 Enable support for ADDI-DATA APCI_3xxx cards
671 To compile this driver as a module, choose M here: the module will be
672 called addi_apci_3xxx.
674 config COMEDI_ADL_PCI6208
675 tristate "ADLink PCI-6208A support"
677 Enable support for ADLink PCI-6208A cards
679 To compile this driver as a module, choose M here: the module will be
682 config COMEDI_ADL_PCI7X3X
683 tristate "ADLink PCI-723X/743X isolated digital i/o board support"
685 Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
686 Supported boards include the 32-channel PCI-7230 (16 in/16 out),
687 PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
688 PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
690 To compile this driver as a module, choose M here: the module will be
693 config COMEDI_ADL_PCI8164
694 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
696 Enable support for ADlink PCI-8164 4 Axes Motion Control board
698 To compile this driver as a module, choose M here: the module will be
701 config COMEDI_ADL_PCI9111
702 tristate "ADLink PCI-9111HR support"
705 Enable support for ADlink PCI9111 cards
707 To compile this driver as a module, choose M here: the module will be
710 config COMEDI_ADL_PCI9118
711 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
713 depends on VIRT_TO_BUS
715 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
717 To compile this driver as a module, choose M here: the module will be
720 config COMEDI_ADV_PCI1710
721 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
723 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
724 PCI-1713, PCI-1720 and PCI-1731
726 To compile this driver as a module, choose M here: the module will be
729 config COMEDI_ADV_PCI1723
730 tristate "Advantech PCI-1723 support"
732 Enable support for Advantech PCI-1723 cards
734 To compile this driver as a module, choose M here: the module will be
737 config COMEDI_ADV_PCI1724
738 tristate "Advantech PCI-1724U support"
740 Enable support for Advantech PCI-1724U cards. These are 32-channel
741 analog output cards with voltage and current loop output ranges and
744 To compile this driver as a module, choose M here: the module will be
747 config COMEDI_ADV_PCI_DIO
748 tristate "Advantech PCI DIO card support"
751 Enable support for Advantech PCI DIO cards
752 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
753 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
754 PCI-1760 and PCI-1762
756 To compile this driver as a module, choose M here: the module will be
759 config COMEDI_AMPLC_DIO200_PCI
760 tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
761 select COMEDI_AMPLC_DIO200
763 Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
764 and PCIe296 DIO boards.
766 To compile this driver as a module, choose M here: the module will be
767 called amplc_dio200_pci.
769 config COMEDI_AMPLC_PC236_PCI
770 tristate "Amplicon PCI236 DIO board support"
771 select COMEDI_AMPLC_PC236
773 Enable support for Amplicon PCI236 DIO board.
775 To compile this driver as a module, choose M here: the module will be
778 config COMEDI_AMPLC_PC263_PCI
779 tristate "Amplicon PCI263 relay board support"
781 Enable support for Amplicon PCI263 relay board. This is a PCI board
782 with 16 reed relay output channels.
784 To compile this driver as a module, choose M here: the module will be
787 config COMEDI_AMPLC_PCI224
788 tristate "Amplicon PCI224 and PCI234 support"
791 Enable support for Amplicon PCI224 and PCI234 AO boards
793 To compile this driver as a module, choose M here: the module will be
796 config COMEDI_AMPLC_PCI230
797 tristate "Amplicon PCI230 and PCI260 support"
800 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
803 To compile this driver as a module, choose M here: the module will be
806 config COMEDI_CONTEC_PCI_DIO
807 tristate "Contec PIO1616L digital I/O board support"
809 Enable support for the Contec PIO1616L digital I/O board
811 To compile this driver as a module, choose M here: the module will be
812 called contec_pci_dio.
814 config COMEDI_DAS08_PCI
815 tristate "DAS-08 PCI support"
818 Enable support for PCI DAS-08 cards.
820 To compile this driver as a module, choose M here: the module will be
824 tristate "Data Translation DT3000 series support"
826 Enable support for Data Translation DT3000 series
827 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
830 To compile this driver as a module, choose M here: the module will be
833 config COMEDI_DYNA_PCI10XX
834 tristate "Dynalog PCI DAQ series support"
836 Enable support for Dynalog PCI DAQ series
839 To compile this driver as a module, choose M here: the module will be
842 config COMEDI_UNIOXX5
843 tristate "Fastwel UNIOxx-5 analog and digital io board support"
845 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
847 To compile this driver as a module, choose M here: the module will be
850 config COMEDI_GSC_HPDI
851 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
854 Enable support for General Standards Corporation high speed parallel
855 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
856 Only receive mode works, transmit not supported.
858 To compile this driver as a module, choose M here: the module will be
861 config COMEDI_ICP_MULTI
862 tristate "Inova ICP_MULTI support"
864 Enable support for Inova ICP_MULTI card
866 To compile this driver as a module, choose M here: the module will be
869 config COMEDI_II_PCI20KC
870 tristate "Intelligent Instruments PCI-20001C carrier support"
872 Enable support for Intelligent Instruments PCI-20001C carrier
873 PCI-20001, PCI-20006 and PCI-20341
875 To compile this driver as a module, choose M here: the module will be
878 config COMEDI_DAQBOARD2000
879 tristate "IOtech DAQboard/2000 support"
882 Enable support for the IOtech DAQboard/2000
884 To compile this driver as a module, choose M here: the module will be
887 config COMEDI_JR3_PCI
888 tristate "JR3/PCI force sensor board support"
890 Enable support for JR3/PCI force sensor boards
892 To compile this driver as a module, choose M here: the module will be
895 config COMEDI_KE_COUNTER
896 tristate "Kolter-Electronic PCI Counter 1 card support"
898 Enable support for Kolter-Electronic PCI Counter 1 cards
900 To compile this driver as a module, choose M here: the module will be
903 config COMEDI_CB_PCIDAS64
904 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
908 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
909 60xx, and 4020 series with the PLX 9080 PCI controller
911 To compile this driver as a module, choose M here: the module will be
914 config COMEDI_CB_PCIDAS
915 tristate "MeasurementComputing PCI-DAS support"
919 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
920 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
921 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
924 To compile this driver as a module, choose M here: the module will be
927 config COMEDI_CB_PCIDDA
928 tristate "MeasurementComputing PCI-DDA series support"
931 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
932 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
933 PCI-DDA04/16 and PCI-DDA02/16
935 To compile this driver as a module, choose M here: the module will be
938 config COMEDI_CB_PCIMDAS
939 tristate "MeasurementComputing PCIM-DAS1602/16 support"
942 Enable support for ComputerBoards/MeasurementComputing PCI Migration
943 series PCIM-DAS1602/16
945 To compile this driver as a module, choose M here: the module will be
948 config COMEDI_CB_PCIMDDA
949 tristate "MeasurementComputing PCIM-DDA06-16 support"
952 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
954 To compile this driver as a module, choose M here: the module will be
958 tristate "Meilhaus ME-4000 support"
960 Enable support for Meilhaus PCI data acquisition cards
961 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
963 To compile this driver as a module, choose M here: the module will be
967 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
969 Enable support for Meilhaus PCI data acquisition cards
970 ME-2000i, ME-2600i and ME-3000vm1
972 To compile this driver as a module, choose M here: the module will be
975 config COMEDI_NI_6527
976 tristate "NI 6527 support"
980 Enable support for the National Instruments 6527 PCI card
982 To compile this driver as a module, choose M here: the module will be
985 config COMEDI_NI_65XX
986 tristate "NI 65xx static dio PCI card support"
990 Enable support for National Instruments 65xx static dio boards.
991 Supported devices: National Instruments PCI-6509 (ni_65xx),
992 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
993 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
994 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
996 To compile this driver as a module, choose M here: the module will be
999 config COMEDI_NI_660X
1000 tristate "NI 660x counter/timer PCI card support"
1002 select COMEDI_NI_TIOCMD
1004 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1005 PXI-6602, PXI-6608 and PXI-6624.
1007 To compile this driver as a module, choose M here: the module will be
1010 config COMEDI_NI_670X
1011 tristate "NI 670x PCI card support"
1015 Enable support for National Instruments PCI-6703 and PCI-6704
1017 To compile this driver as a module, choose M here: the module will be
1020 config COMEDI_NI_LABPC_PCI
1021 tristate "NI Lab-PC PCI-1200 support"
1023 select COMEDI_NI_LABPC
1026 Enable support for National Instruments Lab-PC PCI-1200.
1028 To compile this driver as a module, choose M here: the module will be
1029 called ni_labpc_pci.
1031 config COMEDI_NI_PCIDIO
1032 tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1037 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1038 PCI-6533 and PCI-6534
1040 To compile this driver as a module, choose M here: the module will be
1043 config COMEDI_NI_PCIMIO
1044 tristate "NI PCI-MIO-E series and M series support"
1046 select COMEDI_NI_TIOCMD
1050 Enable support for National Instruments PCI-MIO-E series and M series
1051 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1052 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1053 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1054 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1055 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1056 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1057 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1058 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1059 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1061 To compile this driver as a module, choose M here: the module will be
1064 config COMEDI_RTD520
1065 tristate "Real Time Devices PCI4520/DM7520 support"
1067 Enable support for Real Time Devices PCI4520/DM7520
1069 To compile this driver as a module, choose M here: the module will be
1073 tristate "Sensoray 626 support"
1076 Enable support for Sensoray 626
1078 To compile this driver as a module, choose M here: the module will be
1081 config COMEDI_SSV_DNP
1082 tristate "SSV Embedded Systems DIL/Net-PC support"
1084 Enable support for SSV Embedded Systems DIL/Net-PC
1086 To compile this driver as a module, choose M here: the module will be
1093 config COMEDI_NI_TIOCMD
1096 select COMEDI_NI_TIO
1099 endif # COMEDI_PCI_DRIVERS
1101 menuconfig COMEDI_PCMCIA_DRIVERS
1102 bool "Comedi PCMCIA drivers"
1105 Enable support for comedi PCMCIA drivers.
1107 if COMEDI_PCMCIA_DRIVERS
1109 config COMEDI_CB_DAS16_CS
1110 tristate "CB DAS16 series PCMCIA support"
1112 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1113 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1115 To compile this driver as a module, choose M here: the module will be
1118 config COMEDI_DAS08_CS
1119 tristate "CB DAS08 PCMCIA support"
1122 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1125 To compile this driver as a module, choose M here: the module will be
1128 config COMEDI_NI_DAQ_700_CS
1129 tristate "NI DAQCard-700 PCMCIA support"
1131 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1133 To compile this driver as a module, choose M here: the module will be
1136 config COMEDI_NI_DAQ_DIO24_CS
1137 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1140 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1142 To compile this driver as a module, choose M here: the module will be
1143 called ni_daq_dio24.
1145 config COMEDI_NI_LABPC_CS
1146 tristate "NI DAQCard-1200 PCMCIA support"
1147 select COMEDI_NI_LABPC
1149 Enable support for the National Instruments PCMCIA DAQCard-1200
1151 To compile this driver as a module, choose M here: the module will be
1154 config COMEDI_NI_MIO_CS
1155 tristate "NI DAQCard E series PCMCIA support"
1156 select COMEDI_NI_TIO
1160 Enable support for the National Instruments PCMCIA DAQCard E series
1161 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1164 To compile this driver as a module, choose M here: the module will be
1167 config COMEDI_QUATECH_DAQP_CS
1168 tristate "Quatech DAQP PCMCIA data capture card support"
1170 Enable support for the Quatech DAQP PCMCIA data capture cards
1171 DAQP-208 and DAQP-308
1173 To compile this driver as a module, choose M here: the module will be
1174 called quatech_daqp_cs.
1176 endif # COMEDI_PCMCIA_DRIVERS
1178 menuconfig COMEDI_USB_DRIVERS
1179 bool "Comedi USB drivers"
1182 Enable support for comedi USB drivers.
1184 if COMEDI_USB_DRIVERS
1186 config COMEDI_DT9812
1187 tristate "DataTranslation DT9812 USB module support"
1189 Enable support for the Data Translation DT9812 USB module
1191 To compile this driver as a module, choose M here: the module will be
1194 config COMEDI_USBDUX
1195 tristate "ITL USB-DUX-D support"
1197 Enable support for the Incite Technology Ltd USB-DUX-D Board
1199 To compile this driver as a module, choose M here: the module will be
1202 config COMEDI_USBDUXFAST
1203 tristate "ITL USB-DUXfast support"
1206 Enable support for the Incite Technology Ltd USB-DUXfast Board
1208 To compile this driver as a module, choose M here: the module will be
1211 config COMEDI_USBDUXSIGMA
1212 tristate "ITL USB-DUXsigma support"
1215 Enable support for the Incite Technology Ltd USB-DUXsigma Board
1217 To compile this driver as a module, choose M here: the module will be
1220 config COMEDI_VMK80XX
1221 tristate "Velleman VM110/VM140 USB Board support"
1223 Build the Velleman USB Board Low-Level Driver supporting the
1224 K8055/K8061 aka VM110/VM140 devices
1226 To compile this driver as a module, choose M here: the module will be
1229 endif # COMEDI_USB_DRIVERS
1232 tristate "Generic 8255 support"
1234 Enable generic 8255 support.
1236 You should enable compilation this driver if you plan to use a board
1237 that has an 8255 chip. For multifunction boards, the main driver will
1238 configure the 8255 subdevice automatically.
1240 Note that most PCI based 8255 boards use the 8255_pci driver as a
1241 wrapper around this driver.
1243 To compile this driver as a module, choose M here: the module will be
1249 config COMEDI_AMPLC_DIO200
1252 config COMEDI_AMPLC_PC236
1260 config COMEDI_NI_LABPC
1265 config COMEDI_NI_TIO