From f9804ddbeec2ea709255830a8822bfb4e7584f6a Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 27 Sep 2005 12:13:10 -0700 Subject: [PATCH] [TG3]: misc. fixes Fix interrupt test handler by adding check for IRQ assertion in PCI_STATE register in addition to the status block updated bit. Add test for valid ethernet address in tg3_set_mac_addr(). Add tg3_bus_string() to setup the PCI bus speed/width string for all PCI/PCIX/PCI Express devices. This is used to print the bus type during init_one(). Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 46 insertions(+), 7 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index ef2f1fdd6f..0ac8db25a6 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3389,7 +3389,8 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id, struct tg3 *tp = netdev_priv(dev); struct tg3_hw_status *sblk = tp->hw_status; - if (sblk->status & SD_STATUS_UPDATED) { + if ((sblk->status & SD_STATUS_UPDATED) || + !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) { tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); return IRQ_RETVAL(1); @@ -5395,6 +5396,9 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p) struct tg3 *tp = netdev_priv(dev); struct sockaddr *addr = p; + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); spin_lock_bh(&tp->lock); @@ -10349,6 +10353,44 @@ static char * __devinit tg3_phy_string(struct tg3 *tp) }; } +static char * __devinit tg3_bus_string(struct tg3 *tp, char *str) +{ + if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { + strcpy(str, "PCI Express"); + return str; + } else if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) { + u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL) & 0x1f; + + strcpy(str, "PCIX:"); + + if ((clock_ctrl == 7) || + ((tr32(GRC_MISC_CFG) & GRC_MISC_CFG_BOARD_ID_MASK) == + GRC_MISC_CFG_BOARD_ID_5704CIOBE)) + strcat(str, "133MHz"); + else if (clock_ctrl == 0) + strcat(str, "33MHz"); + else if (clock_ctrl == 2) + strcat(str, "50MHz"); + else if (clock_ctrl == 4) + strcat(str, "66MHz"); + else if (clock_ctrl == 6) + strcat(str, "100MHz"); + else if (clock_ctrl == 7) + strcat(str, "133MHz"); + } else { + strcpy(str, "PCI:"); + if (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED) + strcat(str, "66MHz"); + else + strcat(str, "33MHz"); + } + if (tp->tg3_flags & TG3_FLAG_PCI_32BIT) + strcat(str, ":32-bit"); + else + strcat(str, ":64-bit"); + return str; +} + static struct pci_dev * __devinit tg3_find_5704_peer(struct tg3 *tp) { struct pci_dev *peer; @@ -10411,6 +10453,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, struct net_device *dev; struct tg3 *tp; int i, err, pci_using_dac, pm_cap; + char str[40]; if (tg3_version_printed++ == 0) printk(KERN_INFO "%s", version); @@ -10656,16 +10699,12 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); - printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (PCI%s:%s:%s) %sBaseT Ethernet ", + printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (%s) %sBaseT Ethernet ", dev->name, tp->board_part_number, tp->pci_chip_rev_id, tg3_phy_string(tp), - ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "X" : ""), - ((tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED) ? - ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "133MHz" : "66MHz") : - ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "100MHz" : "33MHz")), - ((tp->tg3_flags & TG3_FLAG_PCI_32BIT) ? "32-bit" : "64-bit"), + tg3_bus_string(tp, str), (tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100" : "10/100/1000"); for (i = 0; i < 6; i++) -- 2.11.4.GIT