From 85ed77df1d5c0635bd7c66e6d213de10d73eca75 Mon Sep 17 00:00:00 2001 From: saratoga Date: Fri, 10 Apr 2009 01:44:05 +0000 Subject: [PATCH] Commit FS#10043 by Michael Chicoine for the Sansa e200v2. Implements LCD sleeping, cleans up unused GPIOs and implements LCD flipping/invert. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20670 a1c6a512-1295-4272-9138-f99709370657 --- .../target/arm/as3525/sansa-e200v2/lcd-e200v2.c | 67 ++++++++++++---------- 1 file changed, 37 insertions(+), 30 deletions(-) diff --git a/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c b/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c index 517aa6a97..cc5275d29 100644 --- a/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c +++ b/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c @@ -84,9 +84,16 @@ static volatile bool lcd_busy = false; #define R_HORIZ_RAM_ADDR_POS 0x44 #define R_VERT_RAM_ADDR_POS 0x45 -#define R_ENTRY_MODE_HORZ 0x7030 +#define R_ENTRY_MODE_HORZ_NORMAL 0x7030 +#define R_ENTRY_MODE_HORZ_FLIPPED 0x7000 #define R_ENTRY_MODE_VERT 0x7038 #define R_ENTRY_MODE_SOLID_VERT 0x1038 +static unsigned short r_entry_mode = R_ENTRY_MODE_HORZ_NORMAL; + +/* Reverse Flag */ +#define R_DISP_CONTROL_NORMAL 0x0004 +#define R_DISP_CONTROL_REV 0x0000 +static unsigned short r_disp_control_rev = R_DISP_CONTROL_NORMAL; /* TODO: Implement this function */ static void lcd_delay(int x) @@ -160,32 +167,41 @@ void lcd_set_contrast(int val) void lcd_set_invert_display(bool yesno) { - (void)yesno; -} + r_disp_control_rev = yesno ? R_DISP_CONTROL_REV : + R_DISP_CONTROL_NORMAL; -static void flip_lcd(bool yesno) -{ - (void)yesno; -} + if (display_on) + { + lcd_write_reg(R_DISP_CONTROL1, 0x0033 | r_disp_control_rev); + } +} /* turn the display upside down (call lcd_update() afterwards) */ void lcd_set_flip(bool yesno) { display_flipped = yesno; - y_offset = yesno ? 4 : 0; /* FIXME: Is a y_offset needed? */ - - if (display_on) - flip_lcd(yesno); + + r_entry_mode = yesno ? R_ENTRY_MODE_HORZ_FLIPPED : + R_ENTRY_MODE_HORZ_NORMAL; } static void lcd_window(int xmin, int ymin, int xmax, int ymax) { ymin += y_offset; ymax += y_offset; - lcd_write_reg(R_HORIZ_RAM_ADDR_POS, (xmax << 8) | xmin); - lcd_write_reg(R_VERT_RAM_ADDR_POS, (ymax << 8) | ymin); - lcd_write_reg(R_RAM_ADDR_SET, (ymin << 8) | xmin); + if (!display_flipped) + { + lcd_write_reg(R_HORIZ_RAM_ADDR_POS, (xmax << 8) | xmin); + lcd_write_reg(R_VERT_RAM_ADDR_POS, (ymax << 8) | ymin); + lcd_write_reg(R_RAM_ADDR_SET, (ymin << 8) | xmin); + } + else + { + lcd_write_reg(R_HORIZ_RAM_ADDR_POS, ((LCD_WIDTH-1 - xmin) << 8) | (LCD_WIDTH-1 - xmax)); + lcd_write_reg(R_VERT_RAM_ADDR_POS, ((LCD_HEIGHT-1 - ymin) << 8) | (LCD_HEIGHT-1 - ymax)); + lcd_write_reg(R_RAM_ADDR_SET, ((LCD_HEIGHT-1 - ymin) << 8) | (LCD_WIDTH-1 - xmin)); + } } static void _display_on(void) @@ -205,13 +221,13 @@ static void _display_on(void) /* Address counter updated in horizontal direction; left to right; * vertical increment horizontal increment. * data format for 8bit transfer or spi = 65k (5,6,5) */ - lcd_write_reg(R_ENTRY_MODE, 0x0030); + lcd_write_reg(R_ENTRY_MODE, r_entry_mode); /* Replace data on writing to GRAM */ lcd_write_reg(R_COMPARE_REG1, 0); lcd_write_reg(R_COMPARE_REG2, 0); - lcd_write_reg(R_DISP_CONTROL1, 0x0000); /* GON = 0, DTE = 0, D1-0 = 00b */ + lcd_write_reg(R_DISP_CONTROL1, 0x0000 | r_disp_control_rev); /* GON = 0, DTE = 0, D1-0 = 00b */ /* Front porch lines: 2; Back porch lines: 2; */ lcd_write_reg(R_DISP_CONTROL2, 0x0203); @@ -285,7 +301,7 @@ static void _display_on(void) lcd_write_reg(R_1ST_SCR_DRV_POS, (LCD_HEIGHT-1) << 8); lcd_write_reg(R_2ND_SCR_DRV_POS, (LCD_HEIGHT-1) << 8); - lcd_write_reg(R_DISP_CONTROL1, 0x0037); + lcd_write_reg(R_DISP_CONTROL1, 0x0033 | r_disp_control_rev); display_on=true; /* must be done before calling lcd_update() */ lcd_update(); @@ -301,17 +317,8 @@ void lcd_init_device(void) GPIOA_DIR |= (1<<5); GPIOA_PIN(5) = 0; - GPIOA_PIN(3) = (1<<3); - - GPIOA_DIR |= (3<<3); - - GPIOA_PIN(3) = (1<<3); - GPIOA_PIN(4) = 0; /*c80b0040 := 0;*/ - GPIOA_DIR |= (1<<7); - GPIOA_PIN(7) = 0; - lcd_delay(1); GPIOA_PIN(5) = (1<<5); @@ -333,8 +340,8 @@ void lcd_enable(bool on) } else { - /* TODO: Implement off sequence */ display_on=false; + lcd_write_reg(R_POWER_CONTROL1, 0x0001); } } } @@ -375,7 +382,7 @@ void lcd_update(void) if (!display_on) return; - lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_HORZ); + lcd_write_reg(R_ENTRY_MODE, r_entry_mode); lcd_busy = true; /* Set start position and window */ @@ -417,7 +424,7 @@ void lcd_update_rect(int x, int y, int width, int height) if (y >= ymax) return; /* nothing left to do */ - lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_HORZ); + lcd_write_reg(R_ENTRY_MODE, r_entry_mode); lcd_busy = true; lcd_window(x, y, xmax, ymax); lcd_write_cmd(R_WRITE_DATA_2_GRAM); @@ -442,7 +449,7 @@ bool lcd_button_support(void) if (lcd_busy) return false; - lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_HORZ); + lcd_write_reg(R_ENTRY_MODE, r_entry_mode); /* Set start position and window */ lcd_window(LCD_WIDTH+1, LCD_HEIGHT+1, LCD_WIDTH+2, LCD_HEIGHT+2); -- 2.11.4.GIT