From cee694d0126c8990a52c6cbfb68bb67491812c42 Mon Sep 17 00:00:00 2001 From: Jakub Narebski Date: Thu, 2 Jun 2011 16:55:52 +0200 Subject: [PATCH] gitweb: Move information about installation from README to INSTALL Almost straightformard moving of "How to configure gitweb for your local system" section from gitweb/README to gitweb/INSTALL, as it is about build time configuration. Updated references to it. Signed-off-by: Jakub Narebski Signed-off-by: Junio C Hamano --- gitweb/INSTALL | 115 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++- gitweb/README | 114 -------------------------------------------------------- 2 files changed, 113 insertions(+), 116 deletions(-) diff --git a/gitweb/INSTALL b/gitweb/INSTALL index 4964a679b3..32a52b7659 100644 --- a/gitweb/INSTALL +++ b/gitweb/INSTALL @@ -28,8 +28,7 @@ scripts). Build time configuration ------------------------ -See also "How to configure gitweb for your local system" in README -file for gitweb (in gitweb/README). +See also "How to configure gitweb for your local system" section below. - There are many configuration variables which affect building of gitweb.cgi; see "default configuration for gitweb" section in main @@ -73,6 +72,118 @@ file for gitweb (in gitweb/README). substitute gitweb.min.js and gitweb.min.css for all uses of gitweb.js and gitweb.css in the help files. + +How to configure gitweb for your local system +--------------------------------------------- + +You can specify the following configuration variables when building GIT: + + * GIT_BINDIR + Points where to find the git executable. You should set it up to + the place where the git binary was installed (usually /usr/bin) if you + don't install git from sources together with gitweb. [Default: $(bindir)] + * GITWEB_SITENAME + Shown in the title of all generated pages, defaults to the server name + (SERVER_NAME CGI environment variable) if not set. [No default] + * GITWEB_PROJECTROOT + The root directory for all projects shown by gitweb. Must be set + correctly for gitweb to find repositories to display. See also + "Gitweb repositories" in the INSTALL file for gitweb. [Default: /pub/git] + * GITWEB_PROJECT_MAXDEPTH + The filesystem traversing limit for getting the project list; the number + is taken as depth relative to the projectroot. It is used when + GITWEB_LIST is a directory (or is not set; then project root is used). + This is meant to speed up project listing on large work trees by limiting + search depth. [Default: 2007] + * GITWEB_LIST + Points to a directory to scan for projects (defaults to project root + if not set / if empty) or to a file with explicit listing of projects + (together with projects' ownership). See "Generating projects list + using gitweb" in INSTALL file for gitweb to find out how to generate + such file from scan of a directory. [No default, which means use root + directory for projects] + * GITWEB_EXPORT_OK + Show repository only if this file exists (in repository). Only + effective if this variable evaluates to true. [No default / Not set] + * GITWEB_STRICT_EXPORT + Only allow viewing of repositories also shown on the overview page. + This for example makes GITWEB_EXPORT_OK to decide if repository is + available and not only if it is shown. If GITWEB_LIST points to + file with list of project, only those repositories listed would be + available for gitweb. [No default] + * GITWEB_HOMETEXT + Points to an .html file which is included on the gitweb project + overview page ('projects_list' view), if it exists. Relative to + gitweb.cgi script. [Default: indextext.html] + * GITWEB_SITE_HEADER + Filename of html text to include at top of each page. Relative to + gitweb.cgi script. [No default] + * GITWEB_SITE_FOOTER + Filename of html text to include at bottom of each page. Relative to + gitweb.cgi script. [No default] + * GITWEB_HOME_LINK_STR + String of the home link on top of all pages, leading to $home_link + (usually main gitweb page, which means projects list). Used as first + part of gitweb view "breadcrumb trail": / / . + [Default: projects] + * GITWEB_SITENAME + Name of your site or organization to appear in page titles. Set it + to something descriptive for clearer bookmarks etc. If not set + (if empty) gitweb uses "$SERVER_NAME Git", or "Untitled Git" if + SERVER_NAME CGI environment variable is not set (e.g. if running + gitweb as standalone script). [No default] + * GITWEB_BASE_URL + Git base URLs used for URL to where fetch project from, i.e. full + URL is "$git_base_url/$project". Shown on projects summary page. + Repository URL for project can be also configured per repository; this + takes precedence over URLs composed from base URL and a project name. + Note that you can setup multiple base URLs (for example one for + git:// protocol access, another for http:// access) from the gitweb + config file. [No default] + * GITWEB_CSS + Points to the location where you put gitweb.css on your web server + (or to be more generic, the URI of gitweb stylesheet). Relative to the + base URI of gitweb. Note that you can setup multiple stylesheets from + the gitweb config file. [Default: static/gitweb.css (or + static/gitweb.min.css if the CSSMIN variable is defined / CSS minifier + is used)] + * GITWEB_LOGO + Points to the location where you put git-logo.png on your web server + (or to be more generic URI of logo, 72x27 size, displayed in top right + corner of each gitweb page, and used as logo for Atom feed). Relative + to base URI of gitweb. [Default: static/git-logo.png] + * GITWEB_FAVICON + Points to the location where you put git-favicon.png on your web server + (or to be more generic URI of favicon, assumed to be image/png type; + web browsers that support favicons (website icons) may display them + in the browser's URL bar and next to site name in bookmarks). Relative + to base URI of gitweb. [Default: static/git-favicon.png] + * GITWEB_JS + Points to the location where you put gitweb.js on your web server + (or to be more generic URI of JavaScript code used by gitweb). + Relative to base URI of gitweb. [Default: static/gitweb.js (or + static/gitweb.min.js if JSMIN build variable is defined / JavaScript + minifier is used)] + * GITWEB_CONFIG + This Perl file will be loaded using 'do' and can be used to override any + of the options above as well as some other options -- see the "Runtime + gitweb configuration" section below, and top of 'gitweb.cgi' for their + full list and description. If the environment variable GITWEB_CONFIG + is set when gitweb.cgi is executed, then the file specified in the + environment variable will be loaded instead of the file specified + when gitweb.cgi was created. [Default: gitweb_config.perl] + * GITWEB_CONFIG_SYSTEM + This Perl file will be loaded using 'do' as a fallback if GITWEB_CONFIG + does not exist. If the environment variable GITWEB_CONFIG_SYSTEM is set + when gitweb.cgi is executed, then the file specified in the environment + variable will be loaded instead of the file specified when gitweb.cgi was + created. [Default: /etc/gitweb.conf] + * HIGHLIGHT_BIN + Path to the highlight executable to use (must be the one from + http://www.andre-simon.de due to assumptions about parameters and output). + Useful if highlight is not installed on your webserver's PATH. + [Default: highlight] + Build example ~~~~~~~~~~~~~ diff --git a/gitweb/README b/gitweb/README index a3a697bf55..a4cfcb42cd 100644 --- a/gitweb/README +++ b/gitweb/README @@ -7,120 +7,6 @@ The one working on: From the git version 1.4.0 gitweb is bundled with git. -How to configure gitweb for your local system ---------------------------------------------- - -See also the "Build time configuration" section in the INSTALL -file for gitweb (in gitweb/INSTALL). - -You can specify the following configuration variables when building GIT: - * GIT_BINDIR - Points where to find the git executable. You should set it up to - the place where the git binary was installed (usually /usr/bin) if you - don't install git from sources together with gitweb. [Default: $(bindir)] - * GITWEB_SITENAME - Shown in the title of all generated pages, defaults to the server name - (SERVER_NAME CGI environment variable) if not set. [No default] - * GITWEB_PROJECTROOT - The root directory for all projects shown by gitweb. Must be set - correctly for gitweb to find repositories to display. See also - "Gitweb repositories" in the INSTALL file for gitweb. [Default: /pub/git] - * GITWEB_PROJECT_MAXDEPTH - The filesystem traversing limit for getting the project list; the number - is taken as depth relative to the projectroot. It is used when - GITWEB_LIST is a directory (or is not set; then project root is used). - This is meant to speed up project listing on large work trees by limiting - search depth. [Default: 2007] - * GITWEB_LIST - Points to a directory to scan for projects (defaults to project root - if not set / if empty) or to a file with explicit listing of projects - (together with projects' ownership). See "Generating projects list - using gitweb" in INSTALL file for gitweb to find out how to generate - such file from scan of a directory. [No default, which means use root - directory for projects] - * GITWEB_EXPORT_OK - Show repository only if this file exists (in repository). Only - effective if this variable evaluates to true. [No default / Not set] - * GITWEB_STRICT_EXPORT - Only allow viewing of repositories also shown on the overview page. - This for example makes GITWEB_EXPORT_OK to decide if repository is - available and not only if it is shown. If GITWEB_LIST points to - file with list of project, only those repositories listed would be - available for gitweb. [No default] - * GITWEB_HOMETEXT - Points to an .html file which is included on the gitweb project - overview page ('projects_list' view), if it exists. Relative to - gitweb.cgi script. [Default: indextext.html] - * GITWEB_SITE_HEADER - Filename of html text to include at top of each page. Relative to - gitweb.cgi script. [No default] - * GITWEB_SITE_FOOTER - Filename of html text to include at bottom of each page. Relative to - gitweb.cgi script. [No default] - * GITWEB_HOME_LINK_STR - String of the home link on top of all pages, leading to $home_link - (usually main gitweb page, which means projects list). Used as first - part of gitweb view "breadcrumb trail": / / . - [Default: projects] - * GITWEB_SITENAME - Name of your site or organization to appear in page titles. Set it - to something descriptive for clearer bookmarks etc. If not set - (if empty) gitweb uses "$SERVER_NAME Git", or "Untitled Git" if - SERVER_NAME CGI environment variable is not set (e.g. if running - gitweb as standalone script). [No default] - * GITWEB_BASE_URL - Git base URLs used for URL to where fetch project from, i.e. full - URL is "$git_base_url/$project". Shown on projects summary page. - Repository URL for project can be also configured per repository; this - takes precedence over URLs composed from base URL and a project name. - Note that you can setup multiple base URLs (for example one for - git:// protocol access, another for http:// access) from the gitweb - config file. [No default] - * GITWEB_CSS - Points to the location where you put gitweb.css on your web server - (or to be more generic, the URI of gitweb stylesheet). Relative to the - base URI of gitweb. Note that you can setup multiple stylesheets from - the gitweb config file. [Default: static/gitweb.css (or - static/gitweb.min.css if the CSSMIN variable is defined / CSS minifier - is used)] - * GITWEB_LOGO - Points to the location where you put git-logo.png on your web server - (or to be more generic URI of logo, 72x27 size, displayed in top right - corner of each gitweb page, and used as logo for Atom feed). Relative - to base URI of gitweb. [Default: static/git-logo.png] - * GITWEB_FAVICON - Points to the location where you put git-favicon.png on your web server - (or to be more generic URI of favicon, assumed to be image/png type; - web browsers that support favicons (website icons) may display them - in the browser's URL bar and next to site name in bookmarks). Relative - to base URI of gitweb. [Default: static/git-favicon.png] - * GITWEB_JS - Points to the location where you put gitweb.js on your web server - (or to be more generic URI of JavaScript code used by gitweb). - Relative to base URI of gitweb. [Default: static/gitweb.js (or - static/gitweb.min.js if JSMIN build variable is defined / JavaScript - minifier is used)] - * GITWEB_CONFIG - This Perl file will be loaded using 'do' and can be used to override any - of the options above as well as some other options -- see the "Runtime - gitweb configuration" section below, and top of 'gitweb.cgi' for their - full list and description. If the environment variable GITWEB_CONFIG - is set when gitweb.cgi is executed, then the file specified in the - environment variable will be loaded instead of the file specified - when gitweb.cgi was created. [Default: gitweb_config.perl] - * GITWEB_CONFIG_SYSTEM - This Perl file will be loaded using 'do' as a fallback if GITWEB_CONFIG - does not exist. If the environment variable GITWEB_CONFIG_SYSTEM is set - when gitweb.cgi is executed, then the file specified in the environment - variable will be loaded instead of the file specified when gitweb.cgi was - created. [Default: /etc/gitweb.conf] - * HIGHLIGHT_BIN - Path to the highlight executable to use (must be the one from - http://www.andre-simon.de due to assumptions about parameters and output). - Useful if highlight is not installed on your webserver's PATH. - [Default: highlight] - - Runtime gitweb configuration ---------------------------- -- 2.11.4.GIT