Merge branch 'master' of git://repo.or.cz/alt-git
[git/mingw.git] / Documentation / diff-options.txt
blobd56ca90998a740dbe4cc5c242326023b4cc769b3
1 // Please don't remove this comment as asciidoc behaves badly when
2 // the first non-empty line is ifdef/ifndef. The symptom is that
3 // without this comment the <git-diff-core> attribute conditionally
4 // defined below ends up being defined unconditionally.
5 // Last checked with asciidoc 7.0.2.
7 ifndef::git-format-patch[]
8 ifndef::git-diff[]
9 ifndef::git-log[]
10 :git-diff-core: 1
11 endif::git-log[]
12 endif::git-diff[]
13 endif::git-format-patch[]
15 ifdef::git-format-patch[]
16 -p::
17 --no-stat::
18         Generate plain patches without any diffstats.
19 endif::git-format-patch[]
21 ifndef::git-format-patch[]
22 -p::
23 -u::
24 --patch::
25         Generate patch (see section on generating patches).
26 ifdef::git-diff[]
27         This is the default.
28 endif::git-diff[]
29 endif::git-format-patch[]
31 -s::
32 --no-patch::
33         Suppress diff output. Useful for commands like `git show` that
34         show the patch by default, or to cancel the effect of `--patch`.
36 -U<n>::
37 --unified=<n>::
38         Generate diffs with <n> lines of context instead of
39         the usual three.
40 ifndef::git-format-patch[]
41         Implies `-p`.
42 endif::git-format-patch[]
44 ifndef::git-format-patch[]
45 --raw::
46 ifndef::git-log[]
47         Generate the diff in raw format.
48 ifdef::git-diff-core[]
49         This is the default.
50 endif::git-diff-core[]
51 endif::git-log[]
52 ifdef::git-log[]
53         For each commit, show a summary of changes using the raw diff
54         format. See the "RAW OUTPUT FORMAT" section of
55         linkgit:git-diff[1]. This is different from showing the log
56         itself in raw format, which you can achieve with
57         `--format=raw`.
58 endif::git-log[]
59 endif::git-format-patch[]
61 ifndef::git-format-patch[]
62 --patch-with-raw::
63         Synonym for `-p --raw`.
64 endif::git-format-patch[]
66 --minimal::
67         Spend extra time to make sure the smallest possible
68         diff is produced.
70 --patience::
71         Generate a diff using the "patience diff" algorithm.
73 --histogram::
74         Generate a diff using the "histogram diff" algorithm.
76 --diff-algorithm={patience|minimal|histogram|myers}::
77         Choose a diff algorithm. The variants are as follows:
80 `default`, `myers`;;
81         The basic greedy diff algorithm. Currently, this is the default.
82 `minimal`;;
83         Spend extra time to make sure the smallest possible diff is
84         produced.
85 `patience`;;
86         Use "patience diff" algorithm when generating patches.
87 `histogram`;;
88         This algorithm extends the patience algorithm to "support
89         low-occurrence common elements".
92 For instance, if you configured diff.algorithm variable to a
93 non-default value and want to use the default one, then you
94 have to use `--diff-algorithm=default` option.
96 --stat[=<width>[,<name-width>[,<count>]]]::
97         Generate a diffstat. By default, as much space as necessary
98         will be used for the filename part, and the rest for the graph
99         part. Maximum width defaults to terminal width, or 80 columns
100         if not connected to a terminal, and can be overridden by
101         `<width>`. The width of the filename part can be limited by
102         giving another width `<name-width>` after a comma. The width
103         of the graph part can be limited by using
104         `--stat-graph-width=<width>` (affects all commands generating
105         a stat graph) or by setting `diff.statGraphWidth=<width>`
106         (does not affect `git format-patch`).
107         By giving a third parameter `<count>`, you can limit the
108         output to the first `<count>` lines, followed by `...` if
109         there are more.
111 These parameters can also be set individually with `--stat-width=<width>`,
112 `--stat-name-width=<name-width>` and `--stat-count=<count>`.
114 --numstat::
115         Similar to `--stat`, but shows number of added and
116         deleted lines in decimal notation and pathname without
117         abbreviation, to make it more machine friendly.  For
118         binary files, outputs two `-` instead of saying
119         `0 0`.
121 --shortstat::
122         Output only the last line of the `--stat` format containing total
123         number of modified files, as well as number of added and deleted
124         lines.
126 --dirstat[=<param1,param2,...>]::
127         Output the distribution of relative amount of changes for each
128         sub-directory. The behavior of `--dirstat` can be customized by
129         passing it a comma separated list of parameters.
130         The defaults are controlled by the `diff.dirstat` configuration
131         variable (see linkgit:git-config[1]).
132         The following parameters are available:
135 `changes`;;
136         Compute the dirstat numbers by counting the lines that have been
137         removed from the source, or added to the destination. This ignores
138         the amount of pure code movements within a file.  In other words,
139         rearranging lines in a file is not counted as much as other changes.
140         This is the default behavior when no parameter is given.
141 `lines`;;
142         Compute the dirstat numbers by doing the regular line-based diff
143         analysis, and summing the removed/added line counts. (For binary
144         files, count 64-byte chunks instead, since binary files have no
145         natural concept of lines). This is a more expensive `--dirstat`
146         behavior than the `changes` behavior, but it does count rearranged
147         lines within a file as much as other changes. The resulting output
148         is consistent with what you get from the other `--*stat` options.
149 `files`;;
150         Compute the dirstat numbers by counting the number of files changed.
151         Each changed file counts equally in the dirstat analysis. This is
152         the computationally cheapest `--dirstat` behavior, since it does
153         not have to look at the file contents at all.
154 `cumulative`;;
155         Count changes in a child directory for the parent directory as well.
156         Note that when using `cumulative`, the sum of the percentages
157         reported may exceed 100%. The default (non-cumulative) behavior can
158         be specified with the `noncumulative` parameter.
159 <limit>;;
160         An integer parameter specifies a cut-off percent (3% by default).
161         Directories contributing less than this percentage of the changes
162         are not shown in the output.
165 Example: The following will count changed files, while ignoring
166 directories with less than 10% of the total amount of changed files,
167 and accumulating child directory counts in the parent directories:
168 `--dirstat=files,10,cumulative`.
170 --summary::
171         Output a condensed summary of extended header information
172         such as creations, renames and mode changes.
174 ifndef::git-format-patch[]
175 --patch-with-stat::
176         Synonym for `-p --stat`.
177 endif::git-format-patch[]
179 ifndef::git-format-patch[]
181 -z::
182 ifdef::git-log[]
183         Separate the commits with NULs instead of with new newlines.
185 Also, when `--raw` or `--numstat` has been given, do not munge
186 pathnames and use NULs as output field terminators.
187 endif::git-log[]
188 ifndef::git-log[]
189         When `--raw`, `--numstat`, `--name-only` or `--name-status` has been
190         given, do not munge pathnames and use NULs as output field terminators.
191 endif::git-log[]
193 Without this option, each pathname output will have TAB, LF, double quotes,
194 and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`,
195 respectively, and the pathname will be enclosed in double quotes if
196 any of those replacements occurred.
198 --name-only::
199         Show only names of changed files.
201 --name-status::
202         Show only names and status of changed files. See the description
203         of the `--diff-filter` option on what the status letters mean.
205 --submodule[=<format>]::
206         Specify how differences in submodules are shown.  When `--submodule`
207         or `--submodule=log` is given, the 'log' format is used.  This format lists
208         the commits in the range like linkgit:git-submodule[1] `summary` does.
209         Omitting the `--submodule` option or specifying `--submodule=short`,
210         uses the 'short' format. This format just shows the names of the commits
211         at the beginning and end of the range.  Can be tweaked via the
212         `diff.submodule` configuration variable.
214 --color[=<when>]::
215         Show colored diff.
216         `--color` (i.e. without '=<when>') is the same as `--color=always`.
217         '<when>' can be one of `always`, `never`, or `auto`.
218 ifdef::git-diff[]
219         It can be changed by the `color.ui` and `color.diff`
220         configuration settings.
221 endif::git-diff[]
223 --no-color::
224         Turn off colored diff.
225 ifdef::git-diff[]
226         This can be used to override configuration settings.
227 endif::git-diff[]
228         It is the same as `--color=never`.
230 --word-diff[=<mode>]::
231         Show a word diff, using the <mode> to delimit changed words.
232         By default, words are delimited by whitespace; see
233         `--word-diff-regex` below.  The <mode> defaults to 'plain', and
234         must be one of:
237 color::
238         Highlight changed words using only colors.  Implies `--color`.
239 plain::
240         Show words as `[-removed-]` and `{+added+}`.  Makes no
241         attempts to escape the delimiters if they appear in the input,
242         so the output may be ambiguous.
243 porcelain::
244         Use a special line-based format intended for script
245         consumption.  Added/removed/unchanged runs are printed in the
246         usual unified diff format, starting with a `+`/`-`/` `
247         character at the beginning of the line and extending to the
248         end of the line.  Newlines in the input are represented by a
249         tilde `~` on a line of its own.
250 none::
251         Disable word diff again.
254 Note that despite the name of the first mode, color is used to
255 highlight the changed parts in all modes if enabled.
257 --word-diff-regex=<regex>::
258         Use <regex> to decide what a word is, instead of considering
259         runs of non-whitespace to be a word.  Also implies
260         `--word-diff` unless it was already enabled.
262 Every non-overlapping match of the
263 <regex> is considered a word.  Anything between these matches is
264 considered whitespace and ignored(!) for the purposes of finding
265 differences.  You may want to append `|[^[:space:]]` to your regular
266 expression to make sure that it matches all non-whitespace characters.
267 A match that contains a newline is silently truncated(!) at the
268 newline.
270 The regex can also be set via a diff driver or configuration option, see
271 linkgit:gitattributes[1] or linkgit:git-config[1].  Giving it explicitly
272 overrides any diff driver or configuration setting.  Diff drivers
273 override configuration settings.
275 --color-words[=<regex>]::
276         Equivalent to `--word-diff=color` plus (if a regex was
277         specified) `--word-diff-regex=<regex>`.
278 endif::git-format-patch[]
280 --no-renames::
281         Turn off rename detection, even when the configuration
282         file gives the default to do so.
284 ifndef::git-format-patch[]
285 --check::
286         Warn if changes introduce whitespace errors.  What are
287         considered whitespace errors is controlled by `core.whitespace`
288         configuration.  By default, trailing whitespaces (including
289         lines that solely consist of whitespaces) and a space character
290         that is immediately followed by a tab character inside the
291         initial indent of the line are considered whitespace errors.
292         Exits with non-zero status if problems are found. Not compatible
293         with --exit-code.
295 --ws-error-highlight=<kind>::
296         Highlight whitespace errors on lines specified by <kind>
297         in the color specified by `color.diff.whitespace`.  <kind>
298         is a comma separated list of `old`, `new`, `context`.  When
299         this option is not given, only whitespace errors in `new`
300         lines are highlighted.  E.g. `--ws-error-highlight=new,old`
301         highlights whitespace errors on both deleted and added lines.
302         `all` can be used as a short-hand for `old,new,context`.
304 endif::git-format-patch[]
306 --full-index::
307         Instead of the first handful of characters, show the full
308         pre- and post-image blob object names on the "index"
309         line when generating patch format output.
311 --binary::
312         In addition to `--full-index`, output a binary diff that
313         can be applied with `git-apply`.
315 --abbrev[=<n>]::
316         Instead of showing the full 40-byte hexadecimal object
317         name in diff-raw format output and diff-tree header
318         lines, show only a partial prefix.  This is
319         independent of the `--full-index` option above, which controls
320         the diff-patch output format.  Non default number of
321         digits can be specified with `--abbrev=<n>`.
323 -B[<n>][/<m>]::
324 --break-rewrites[=[<n>][/<m>]]::
325         Break complete rewrite changes into pairs of delete and
326         create. This serves two purposes:
328 It affects the way a change that amounts to a total rewrite of a file
329 not as a series of deletion and insertion mixed together with a very
330 few lines that happen to match textually as the context, but as a
331 single deletion of everything old followed by a single insertion of
332 everything new, and the number `m` controls this aspect of the -B
333 option (defaults to 60%). `-B/70%` specifies that less than 30% of the
334 original should remain in the result for Git to consider it a total
335 rewrite (i.e. otherwise the resulting patch will be a series of
336 deletion and insertion mixed together with context lines).
338 When used with -M, a totally-rewritten file is also considered as the
339 source of a rename (usually -M only considers a file that disappeared
340 as the source of a rename), and the number `n` controls this aspect of
341 the -B option (defaults to 50%). `-B20%` specifies that a change with
342 addition and deletion compared to 20% or more of the file's size are
343 eligible for being picked up as a possible source of a rename to
344 another file.
346 -M[<n>]::
347 --find-renames[=<n>]::
348 ifndef::git-log[]
349         Detect renames.
350 endif::git-log[]
351 ifdef::git-log[]
352         If generating diffs, detect and report renames for each commit.
353         For following files across renames while traversing history, see
354         `--follow`.
355 endif::git-log[]
356         If `n` is specified, it is a threshold on the similarity
357         index (i.e. amount of addition/deletions compared to the
358         file's size). For example, `-M90%` means Git should consider a
359         delete/add pair to be a rename if more than 90% of the file
360         hasn't changed.  Without a `%` sign, the number is to be read as
361         a fraction, with a decimal point before it.  I.e., `-M5` becomes
362         0.5, and is thus the same as `-M50%`.  Similarly, `-M05` is
363         the same as `-M5%`.  To limit detection to exact renames, use
364         `-M100%`.  The default similarity index is 50%.
366 -C[<n>]::
367 --find-copies[=<n>]::
368         Detect copies as well as renames.  See also `--find-copies-harder`.
369         If `n` is specified, it has the same meaning as for `-M<n>`.
371 --find-copies-harder::
372         For performance reasons, by default, `-C` option finds copies only
373         if the original file of the copy was modified in the same
374         changeset.  This flag makes the command
375         inspect unmodified files as candidates for the source of
376         copy.  This is a very expensive operation for large
377         projects, so use it with caution.  Giving more than one
378         `-C` option has the same effect.
380 -D::
381 --irreversible-delete::
382         Omit the preimage for deletes, i.e. print only the header but not
383         the diff between the preimage and `/dev/null`. The resulting patch
384         is not meant to be applied with `patch` or `git apply`; this is
385         solely for people who want to just concentrate on reviewing the
386         text after the change. In addition, the output obviously lack
387         enough information to apply such a patch in reverse, even manually,
388         hence the name of the option.
390 When used together with `-B`, omit also the preimage in the deletion part
391 of a delete/create pair.
393 -l<num>::
394         The `-M` and `-C` options require O(n^2) processing time where n
395         is the number of potential rename/copy targets.  This
396         option prevents rename/copy detection from running if
397         the number of rename/copy targets exceeds the specified
398         number.
400 ifndef::git-format-patch[]
401 --diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]::
402         Select only files that are Added (`A`), Copied (`C`),
403         Deleted (`D`), Modified (`M`), Renamed (`R`), have their
404         type (i.e. regular file, symlink, submodule, ...) changed (`T`),
405         are Unmerged (`U`), are
406         Unknown (`X`), or have had their pairing Broken (`B`).
407         Any combination of the filter characters (including none) can be used.
408         When `*` (All-or-none) is added to the combination, all
409         paths are selected if there is any file that matches
410         other criteria in the comparison; if there is no file
411         that matches other criteria, nothing is selected.
413 -S<string>::
414         Look for differences that change the number of occurrences of
415         the specified string (i.e. addition/deletion) in a file.
416         Intended for the scripter's use.
418 It is useful when you're looking for an exact block of code (like a
419 struct), and want to know the history of that block since it first
420 came into being: use the feature iteratively to feed the interesting
421 block in the preimage back into `-S`, and keep going until you get the
422 very first version of the block.
424 -G<regex>::
425         Look for differences whose patch text contains added/removed
426         lines that match <regex>.
428 To illustrate the difference between `-S<regex> --pickaxe-regex` and
429 `-G<regex>`, consider a commit with the following diff in the same
430 file:
432 ----
433 +    return !regexec(regexp, two->ptr, 1, &regmatch, 0);
435 -    hit = !regexec(regexp, mf2.ptr, 1, &regmatch, 0);
436 ----
438 While `git log -G"regexec\(regexp"` will show this commit, `git log
439 -S"regexec\(regexp" --pickaxe-regex` will not (because the number of
440 occurrences of that string did not change).
442 See the 'pickaxe' entry in linkgit:gitdiffcore[7] for more
443 information.
445 --pickaxe-all::
446         When `-S` or `-G` finds a change, show all the changes in that
447         changeset, not just the files that contain the change
448         in <string>.
450 --pickaxe-regex::
451         Treat the <string> given to `-S` as an extended POSIX regular
452         expression to match.
453 endif::git-format-patch[]
455 -O<orderfile>::
456         Output the patch in the order specified in the
457         <orderfile>, which has one shell glob pattern per line.
458         This overrides the `diff.orderFile` configuration variable
459         (see linkgit:git-config[1]).  To cancel `diff.orderFile`,
460         use `-O/dev/null`.
462 ifndef::git-format-patch[]
463 -R::
464         Swap two inputs; that is, show differences from index or
465         on-disk file to tree contents.
467 --relative[=<path>]::
468         When run from a subdirectory of the project, it can be
469         told to exclude changes outside the directory and show
470         pathnames relative to it with this option.  When you are
471         not in a subdirectory (e.g. in a bare repository), you
472         can name which subdirectory to make the output relative
473         to by giving a <path> as an argument.
474 endif::git-format-patch[]
476 -a::
477 --text::
478         Treat all files as text.
480 --ignore-space-at-eol::
481         Ignore changes in whitespace at EOL.
483 -b::
484 --ignore-space-change::
485         Ignore changes in amount of whitespace.  This ignores whitespace
486         at line end, and considers all other sequences of one or
487         more whitespace characters to be equivalent.
489 -w::
490 --ignore-all-space::
491         Ignore whitespace when comparing lines.  This ignores
492         differences even if one line has whitespace where the other
493         line has none.
495 --ignore-blank-lines::
496         Ignore changes whose lines are all blank.
498 --inter-hunk-context=<lines>::
499         Show the context between diff hunks, up to the specified number
500         of lines, thereby fusing hunks that are close to each other.
502 -W::
503 --function-context::
504         Show whole surrounding functions of changes.
506 ifndef::git-format-patch[]
507 ifndef::git-log[]
508 --exit-code::
509         Make the program exit with codes similar to diff(1).
510         That is, it exits with 1 if there were differences and
511         0 means no differences.
513 --quiet::
514         Disable all output of the program. Implies `--exit-code`.
515 endif::git-log[]
516 endif::git-format-patch[]
518 --ext-diff::
519         Allow an external diff helper to be executed. If you set an
520         external diff driver with linkgit:gitattributes[5], you need
521         to use this option with linkgit:git-log[1] and friends.
523 --no-ext-diff::
524         Disallow external diff drivers.
526 --textconv::
527 --no-textconv::
528         Allow (or disallow) external text conversion filters to be run
529         when comparing binary files. See linkgit:gitattributes[5] for
530         details. Because textconv filters are typically a one-way
531         conversion, the resulting diff is suitable for human
532         consumption, but cannot be applied. For this reason, textconv
533         filters are enabled by default only for linkgit:git-diff[1] and
534         linkgit:git-log[1], but not for linkgit:git-format-patch[1] or
535         diff plumbing commands.
537 --ignore-submodules[=<when>]::
538         Ignore changes to submodules in the diff generation. <when> can be
539         either "none", "untracked", "dirty" or "all", which is the default.
540         Using "none" will consider the submodule modified when it either contains
541         untracked or modified files or its HEAD differs from the commit recorded
542         in the superproject and can be used to override any settings of the
543         'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When
544         "untracked" is used submodules are not considered dirty when they only
545         contain untracked content (but they are still scanned for modified
546         content). Using "dirty" ignores all changes to the work tree of submodules,
547         only changes to the commits stored in the superproject are shown (this was
548         the behavior until 1.7.0). Using "all" hides all changes to submodules.
550 --src-prefix=<prefix>::
551         Show the given source prefix instead of "a/".
553 --dst-prefix=<prefix>::
554         Show the given destination prefix instead of "b/".
556 --no-prefix::
557         Do not show any source or destination prefix.
559 For more detailed explanation on these common options, see also
560 linkgit:gitdiffcore[7].