Move setup_diff_pager to libgit.a
[git/jnareb-git.git] / Documentation / gitcore-tutorial.txt
blob5325c5a7d5cab3f74c3866319a60d35e4299da2e
1 gitcore-tutorial(7)
2 ===================
4 NAME
5 ----
6 gitcore-tutorial - A git core tutorial for developers
8 SYNOPSIS
9 --------
10 git *
12 DESCRIPTION
13 -----------
15 This tutorial explains how to use the "core" git commands to set up and
16 work with a git repository.
18 If you just need to use git as a revision control system you may prefer
19 to start with "A Tutorial Introduction to GIT" (linkgit:gittutorial[7]) or
20 link:user-manual.html[the GIT User Manual].
22 However, an understanding of these low-level tools can be helpful if
23 you want to understand git's internals.
25 The core git is often called "plumbing", with the prettier user
26 interfaces on top of it called "porcelain". You may not want to use the
27 plumbing directly very often, but it can be good to know what the
28 plumbing does for when the porcelain isn't flushing.
30 Back when this document was originally written, many porcelain
31 commands were shell scripts. For simplicity, it still uses them as
32 examples to illustrate how plumbing is fit together to form the
33 porcelain commands. The source tree includes some of these scripts in
34 contrib/examples/ for reference. Although these are not implemented as
35 shell scripts anymore, the description of what the plumbing layer
36 commands do is still valid.
38 [NOTE]
39 Deeper technical details are often marked as Notes, which you can
40 skip on your first reading.
43 Creating a git repository
44 -------------------------
46 Creating a new git repository couldn't be easier: all git repositories start
47 out empty, and the only thing you need to do is find yourself a
48 subdirectory that you want to use as a working tree - either an empty
49 one for a totally new project, or an existing working tree that you want
50 to import into git.
52 For our first example, we're going to start a totally new repository from
53 scratch, with no pre-existing files, and we'll call it 'git-tutorial'.
54 To start up, create a subdirectory for it, change into that
55 subdirectory, and initialize the git infrastructure with 'git init':
57 ------------------------------------------------
58 $ mkdir git-tutorial
59 $ cd git-tutorial
60 $ git init
61 ------------------------------------------------
63 to which git will reply
65 ----------------
66 Initialized empty Git repository in .git/
67 ----------------
69 which is just git's way of saying that you haven't been doing anything
70 strange, and that it will have created a local `.git` directory setup for
71 your new project. You will now have a `.git` directory, and you can
72 inspect that with 'ls'. For your new empty project, it should show you
73 three entries, among other things:
75  - a file called `HEAD`, that has `ref: refs/heads/master` in it.
76    This is similar to a symbolic link and points at
77    `refs/heads/master` relative to the `HEAD` file.
79 Don't worry about the fact that the file that the `HEAD` link points to
80 doesn't even exist yet -- you haven't created the commit that will
81 start your `HEAD` development branch yet.
83  - a subdirectory called `objects`, which will contain all the
84    objects of your project. You should never have any real reason to
85    look at the objects directly, but you might want to know that these
86    objects are what contains all the real 'data' in your repository.
88  - a subdirectory called `refs`, which contains references to objects.
90 In particular, the `refs` subdirectory will contain two other
91 subdirectories, named `heads` and `tags` respectively. They do
92 exactly what their names imply: they contain references to any number
93 of different 'heads' of development (aka 'branches'), and to any
94 'tags' that you have created to name specific versions in your
95 repository.
97 One note: the special `master` head is the default branch, which is
98 why the `.git/HEAD` file was created points to it even if it
99 doesn't yet exist. Basically, the `HEAD` link is supposed to always
100 point to the branch you are working on right now, and you always
101 start out expecting to work on the `master` branch.
103 However, this is only a convention, and you can name your branches
104 anything you want, and don't have to ever even 'have' a `master`
105 branch. A number of the git tools will assume that `.git/HEAD` is
106 valid, though.
108 [NOTE]
109 An 'object' is identified by its 160-bit SHA1 hash, aka 'object name',
110 and a reference to an object is always the 40-byte hex
111 representation of that SHA1 name. The files in the `refs`
112 subdirectory are expected to contain these hex references
113 (usually with a final `\n` at the end), and you should thus
114 expect to see a number of 41-byte files containing these
115 references in these `refs` subdirectories when you actually start
116 populating your tree.
118 [NOTE]
119 An advanced user may want to take a look at linkgit:gitrepository-layout[5]
120 after finishing this tutorial.
122 You have now created your first git repository. Of course, since it's
123 empty, that's not very useful, so let's start populating it with data.
126 Populating a git repository
127 ---------------------------
129 We'll keep this simple and stupid, so we'll start off with populating a
130 few trivial files just to get a feel for it.
132 Start off with just creating any random files that you want to maintain
133 in your git repository. We'll start off with a few bad examples, just to
134 get a feel for how this works:
136 ------------------------------------------------
137 $ echo "Hello World" >hello
138 $ echo "Silly example" >example
139 ------------------------------------------------
141 you have now created two files in your working tree (aka 'working directory'),
142 but to actually check in your hard work, you will have to go through two steps:
144  - fill in the 'index' file (aka 'cache') with the information about your
145    working tree state.
147  - commit that index file as an object.
149 The first step is trivial: when you want to tell git about any changes
150 to your working tree, you use the 'git update-index' program. That
151 program normally just takes a list of filenames you want to update, but
152 to avoid trivial mistakes, it refuses to add new entries to the index
153 (or remove existing ones) unless you explicitly tell it that you're
154 adding a new entry with the `--add` flag (or removing an entry with the
155 `--remove`) flag.
157 So to populate the index with the two files you just created, you can do
159 ------------------------------------------------
160 $ git update-index --add hello example
161 ------------------------------------------------
163 and you have now told git to track those two files.
165 In fact, as you did that, if you now look into your object directory,
166 you'll notice that git will have added two new objects to the object
167 database. If you did exactly the steps above, you should now be able to do
170 ----------------
171 $ ls .git/objects/??/*
172 ----------------
174 and see two files:
176 ----------------
177 .git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238
178 .git/objects/f2/4c74a2e500f5ee1332c86b94199f52b1d1d962
179 ----------------
181 which correspond with the objects with names of `557db...` and
182 `f24c7...` respectively.
184 If you want to, you can use 'git cat-file' to look at those objects, but
185 you'll have to use the object name, not the filename of the object:
187 ----------------
188 $ git cat-file -t 557db03de997c86a4a028e1ebd3a1ceb225be238
189 ----------------
191 where the `-t` tells 'git cat-file' to tell you what the "type" of the
192 object is. git will tell you that you have a "blob" object (i.e., just a
193 regular file), and you can see the contents with
195 ----------------
196 $ git cat-file blob 557db03
197 ----------------
199 which will print out "Hello World". The object `557db03` is nothing
200 more than the contents of your file `hello`.
202 [NOTE]
203 Don't confuse that object with the file `hello` itself. The
204 object is literally just those specific *contents* of the file, and
205 however much you later change the contents in file `hello`, the object
206 we just looked at will never change. Objects are immutable.
208 [NOTE]
209 The second example demonstrates that you can
210 abbreviate the object name to only the first several
211 hexadecimal digits in most places.
213 Anyway, as we mentioned previously, you normally never actually take a
214 look at the objects themselves, and typing long 40-character hex
215 names is not something you'd normally want to do. The above digression
216 was just to show that 'git update-index' did something magical, and
217 actually saved away the contents of your files into the git object
218 database.
220 Updating the index did something else too: it created a `.git/index`
221 file. This is the index that describes your current working tree, and
222 something you should be very aware of. Again, you normally never worry
223 about the index file itself, but you should be aware of the fact that
224 you have not actually really "checked in" your files into git so far,
225 you've only *told* git about them.
227 However, since git knows about them, you can now start using some of the
228 most basic git commands to manipulate the files or look at their status.
230 In particular, let's not even check in the two files into git yet, we'll
231 start off by adding another line to `hello` first:
233 ------------------------------------------------
234 $ echo "It's a new day for git" >>hello
235 ------------------------------------------------
237 and you can now, since you told git about the previous state of `hello`, ask
238 git what has changed in the tree compared to your old index, using the
239 'git diff-files' command:
241 ------------
242 $ git diff-files
243 ------------
245 Oops. That wasn't very readable. It just spit out its own internal
246 version of a 'diff', but that internal version really just tells you
247 that it has noticed that "hello" has been modified, and that the old object
248 contents it had have been replaced with something else.
250 To make it readable, we can tell 'git diff-files' to output the
251 differences as a patch, using the `-p` flag:
253 ------------
254 $ git diff-files -p
255 diff --git a/hello b/hello
256 index 557db03..263414f 100644
257 --- a/hello
258 +++ b/hello
259 @@ -1 +1,2 @@
260  Hello World
261 +It's a new day for git
262 ----
264 i.e. the diff of the change we caused by adding another line to `hello`.
266 In other words, 'git diff-files' always shows us the difference between
267 what is recorded in the index, and what is currently in the working
268 tree. That's very useful.
270 A common shorthand for `git diff-files -p` is to just write `git
271 diff`, which will do the same thing.
273 ------------
274 $ git diff
275 diff --git a/hello b/hello
276 index 557db03..263414f 100644
277 --- a/hello
278 +++ b/hello
279 @@ -1 +1,2 @@
280  Hello World
281 +It's a new day for git
282 ------------
285 Committing git state
286 --------------------
288 Now, we want to go to the next stage in git, which is to take the files
289 that git knows about in the index, and commit them as a real tree. We do
290 that in two phases: creating a 'tree' object, and committing that 'tree'
291 object as a 'commit' object together with an explanation of what the
292 tree was all about, along with information of how we came to that state.
294 Creating a tree object is trivial, and is done with 'git write-tree'.
295 There are no options or other input: `git write-tree` will take the
296 current index state, and write an object that describes that whole
297 index. In other words, we're now tying together all the different
298 filenames with their contents (and their permissions), and we're
299 creating the equivalent of a git "directory" object:
301 ------------------------------------------------
302 $ git write-tree
303 ------------------------------------------------
305 and this will just output the name of the resulting tree, in this case
306 (if you have done exactly as I've described) it should be
308 ----------------
309 8988da15d077d4829fc51d8544c097def6644dbb
310 ----------------
312 which is another incomprehensible object name. Again, if you want to,
313 you can use `git cat-file -t 8988d...` to see that this time the object
314 is not a "blob" object, but a "tree" object (you can also use
315 `git cat-file` to actually output the raw object contents, but you'll see
316 mainly a binary mess, so that's less interesting).
318 However -- normally you'd never use 'git write-tree' on its own, because
319 normally you always commit a tree into a commit object using the
320 'git commit-tree' command. In fact, it's easier to not actually use
321 'git write-tree' on its own at all, but to just pass its result in as an
322 argument to 'git commit-tree'.
324 'git commit-tree' normally takes several arguments -- it wants to know
325 what the 'parent' of a commit was, but since this is the first commit
326 ever in this new repository, and it has no parents, we only need to pass in
327 the object name of the tree. However, 'git commit-tree' also wants to get a
328 commit message on its standard input, and it will write out the resulting
329 object name for the commit to its standard output.
331 And this is where we create the `.git/refs/heads/master` file
332 which is pointed at by `HEAD`. This file is supposed to contain
333 the reference to the top-of-tree of the master branch, and since
334 that's exactly what 'git commit-tree' spits out, we can do this
335 all with a sequence of simple shell commands:
337 ------------------------------------------------
338 $ tree=$(git write-tree)
339 $ commit=$(echo 'Initial commit' | git commit-tree $tree)
340 $ git update-ref HEAD $commit
341 ------------------------------------------------
343 In this case this creates a totally new commit that is not related to
344 anything else. Normally you do this only *once* for a project ever, and
345 all later commits will be parented on top of an earlier commit.
347 Again, normally you'd never actually do this by hand. There is a
348 helpful script called `git commit` that will do all of this for you. So
349 you could have just written `git commit`
350 instead, and it would have done the above magic scripting for you.
353 Making a change
354 ---------------
356 Remember how we did the 'git update-index' on file `hello` and then we
357 changed `hello` afterward, and could compare the new state of `hello` with the
358 state we saved in the index file?
360 Further, remember how I said that 'git write-tree' writes the contents
361 of the *index* file to the tree, and thus what we just committed was in
362 fact the *original* contents of the file `hello`, not the new ones. We did
363 that on purpose, to show the difference between the index state, and the
364 state in the working tree, and how they don't have to match, even
365 when we commit things.
367 As before, if we do `git diff-files -p` in our git-tutorial project,
368 we'll still see the same difference we saw last time: the index file
369 hasn't changed by the act of committing anything. However, now that we
370 have committed something, we can also learn to use a new command:
371 'git diff-index'.
373 Unlike 'git diff-files', which showed the difference between the index
374 file and the working tree, 'git diff-index' shows the differences
375 between a committed *tree* and either the index file or the working
376 tree. In other words, 'git diff-index' wants a tree to be diffed
377 against, and before we did the commit, we couldn't do that, because we
378 didn't have anything to diff against.
380 But now we can do
382 ----------------
383 $ git diff-index -p HEAD
384 ----------------
386 (where `-p` has the same meaning as it did in 'git diff-files'), and it
387 will show us the same difference, but for a totally different reason.
388 Now we're comparing the working tree not against the index file,
389 but against the tree we just wrote. It just so happens that those two
390 are obviously the same, so we get the same result.
392 Again, because this is a common operation, you can also just shorthand
393 it with
395 ----------------
396 $ git diff HEAD
397 ----------------
399 which ends up doing the above for you.
401 In other words, 'git diff-index' normally compares a tree against the
402 working tree, but when given the `--cached` flag, it is told to
403 instead compare against just the index cache contents, and ignore the
404 current working tree state entirely. Since we just wrote the index
405 file to HEAD, doing `git diff-index --cached -p HEAD` should thus return
406 an empty set of differences, and that's exactly what it does.
408 [NOTE]
409 ================
410 'git diff-index' really always uses the index for its
411 comparisons, and saying that it compares a tree against the working
412 tree is thus not strictly accurate. In particular, the list of
413 files to compare (the "meta-data") *always* comes from the index file,
414 regardless of whether the `--cached` flag is used or not. The `--cached`
415 flag really only determines whether the file *contents* to be compared
416 come from the working tree or not.
418 This is not hard to understand, as soon as you realize that git simply
419 never knows (or cares) about files that it is not told about
420 explicitly. git will never go *looking* for files to compare, it
421 expects you to tell it what the files are, and that's what the index
422 is there for.
423 ================
425 However, our next step is to commit the *change* we did, and again, to
426 understand what's going on, keep in mind the difference between "working
427 tree contents", "index file" and "committed tree". We have changes
428 in the working tree that we want to commit, and we always have to
429 work through the index file, so the first thing we need to do is to
430 update the index cache:
432 ------------------------------------------------
433 $ git update-index hello
434 ------------------------------------------------
436 (note how we didn't need the `--add` flag this time, since git knew
437 about the file already).
439 Note what happens to the different 'git diff-{asterisk}' versions here.
440 After we've updated `hello` in the index, `git diff-files -p` now shows no
441 differences, but `git diff-index -p HEAD` still *does* show that the
442 current state is different from the state we committed. In fact, now
443 'git diff-index' shows the same difference whether we use the `--cached`
444 flag or not, since now the index is coherent with the working tree.
446 Now, since we've updated `hello` in the index, we can commit the new
447 version. We could do it by writing the tree by hand again, and
448 committing the tree (this time we'd have to use the `-p HEAD` flag to
449 tell commit that the HEAD was the *parent* of the new commit, and that
450 this wasn't an initial commit any more), but you've done that once
451 already, so let's just use the helpful script this time:
453 ------------------------------------------------
454 $ git commit
455 ------------------------------------------------
457 which starts an editor for you to write the commit message and tells you
458 a bit about what you have done.
460 Write whatever message you want, and all the lines that start with '#'
461 will be pruned out, and the rest will be used as the commit message for
462 the change. If you decide you don't want to commit anything after all at
463 this point (you can continue to edit things and update the index), you
464 can just leave an empty message. Otherwise `git commit` will commit
465 the change for you.
467 You've now made your first real git commit. And if you're interested in
468 looking at what `git commit` really does, feel free to investigate:
469 it's a few very simple shell scripts to generate the helpful (?) commit
470 message headers, and a few one-liners that actually do the
471 commit itself ('git commit').
474 Inspecting Changes
475 ------------------
477 While creating changes is useful, it's even more useful if you can tell
478 later what changed. The most useful command for this is another of the
479 'diff' family, namely 'git diff-tree'.
481 'git diff-tree' can be given two arbitrary trees, and it will tell you the
482 differences between them. Perhaps even more commonly, though, you can
483 give it just a single commit object, and it will figure out the parent
484 of that commit itself, and show the difference directly. Thus, to get
485 the same diff that we've already seen several times, we can now do
487 ----------------
488 $ git diff-tree -p HEAD
489 ----------------
491 (again, `-p` means to show the difference as a human-readable patch),
492 and it will show what the last commit (in `HEAD`) actually changed.
494 [NOTE]
495 ============
496 Here is an ASCII art by Jon Loeliger that illustrates how
497 various 'diff-{asterisk}' commands compare things.
499                       diff-tree
500                        +----+
501                        |    |
502                        |    |
503                        V    V
504                     +-----------+
505                     | Object DB |
506                     |  Backing  |
507                     |   Store   |
508                     +-----------+
509                       ^    ^
510                       |    |
511                       |    |  diff-index --cached
512                       |    |
513           diff-index  |    V
514                       |  +-----------+
515                       |  |   Index   |
516                       |  |  "cache"  |
517                       |  +-----------+
518                       |    ^
519                       |    |
520                       |    |  diff-files
521                       |    |
522                       V    V
523                     +-----------+
524                     |  Working  |
525                     | Directory |
526                     +-----------+
527 ============
529 More interestingly, you can also give 'git diff-tree' the `--pretty` flag,
530 which tells it to also show the commit message and author and date of the
531 commit, and you can tell it to show a whole series of diffs.
532 Alternatively, you can tell it to be "silent", and not show the diffs at
533 all, but just show the actual commit message.
535 In fact, together with the 'git rev-list' program (which generates a
536 list of revisions), 'git diff-tree' ends up being a veritable fount of
537 changes. A trivial (but very useful) script called 'git whatchanged' is
538 included with git which does exactly this, and shows a log of recent
539 activities.
541 To see the whole history of our pitiful little git-tutorial project, you
542 can do
544 ----------------
545 $ git log
546 ----------------
548 which shows just the log messages, or if we want to see the log together
549 with the associated patches use the more complex (and much more
550 powerful)
552 ----------------
553 $ git whatchanged -p
554 ----------------
556 and you will see exactly what has changed in the repository over its
557 short history.
559 [NOTE]
560 When using the above two commands, the initial commit will be shown.
561 If this is a problem because it is huge, you can hide it by setting
562 the log.showroot configuration variable to false. Having this, you
563 can still show it for each command just adding the `--root` option,
564 which is a flag for 'git diff-tree' accepted by both commands.
566 With that, you should now be having some inkling of what git does, and
567 can explore on your own.
569 [NOTE]
570 Most likely, you are not directly using the core
571 git Plumbing commands, but using Porcelain such as 'git add', `git-rm'
572 and `git-commit'.
575 Tagging a version
576 -----------------
578 In git, there are two kinds of tags, a "light" one, and an "annotated tag".
580 A "light" tag is technically nothing more than a branch, except we put
581 it in the `.git/refs/tags/` subdirectory instead of calling it a `head`.
582 So the simplest form of tag involves nothing more than
584 ------------------------------------------------
585 $ git tag my-first-tag
586 ------------------------------------------------
588 which just writes the current `HEAD` into the `.git/refs/tags/my-first-tag`
589 file, after which point you can then use this symbolic name for that
590 particular state. You can, for example, do
592 ----------------
593 $ git diff my-first-tag
594 ----------------
596 to diff your current state against that tag which at this point will
597 obviously be an empty diff, but if you continue to develop and commit
598 stuff, you can use your tag as an "anchor-point" to see what has changed
599 since you tagged it.
601 An "annotated tag" is actually a real git object, and contains not only a
602 pointer to the state you want to tag, but also a small tag name and
603 message, along with optionally a PGP signature that says that yes,
604 you really did
605 that tag. You create these annotated tags with either the `-a` or
606 `-s` flag to 'git tag':
608 ----------------
609 $ git tag -s <tagname>
610 ----------------
612 which will sign the current `HEAD` (but you can also give it another
613 argument that specifies the thing to tag, e.g., you could have tagged the
614 current `mybranch` point by using `git tag <tagname> mybranch`).
616 You normally only do signed tags for major releases or things
617 like that, while the light-weight tags are useful for any marking you
618 want to do -- any time you decide that you want to remember a certain
619 point, just create a private tag for it, and you have a nice symbolic
620 name for the state at that point.
623 Copying repositories
624 --------------------
626 git repositories are normally totally self-sufficient and relocatable.
627 Unlike CVS, for example, there is no separate notion of
628 "repository" and "working tree". A git repository normally *is* the
629 working tree, with the local git information hidden in the `.git`
630 subdirectory. There is nothing else. What you see is what you got.
632 [NOTE]
633 You can tell git to split the git internal information from
634 the directory that it tracks, but we'll ignore that for now: it's not
635 how normal projects work, and it's really only meant for special uses.
636 So the mental model of "the git information is always tied directly to
637 the working tree that it describes" may not be technically 100%
638 accurate, but it's a good model for all normal use.
640 This has two implications:
642  - if you grow bored with the tutorial repository you created (or you've
643    made a mistake and want to start all over), you can just do simple
645 ----------------
646 $ rm -rf git-tutorial
647 ----------------
649 and it will be gone. There's no external repository, and there's no
650 history outside the project you created.
652  - if you want to move or duplicate a git repository, you can do so. There
653    is 'git clone' command, but if all you want to do is just to
654    create a copy of your repository (with all the full history that
655    went along with it), you can do so with a regular
656    `cp -a git-tutorial new-git-tutorial`.
658 Note that when you've moved or copied a git repository, your git index
659 file (which caches various information, notably some of the "stat"
660 information for the files involved) will likely need to be refreshed.
661 So after you do a `cp -a` to create a new copy, you'll want to do
663 ----------------
664 $ git update-index --refresh
665 ----------------
667 in the new repository to make sure that the index file is up-to-date.
669 Note that the second point is true even across machines. You can
670 duplicate a remote git repository with *any* regular copy mechanism, be it
671 'scp', 'rsync' or 'wget'.
673 When copying a remote repository, you'll want to at a minimum update the
674 index cache when you do this, and especially with other peoples'
675 repositories you often want to make sure that the index cache is in some
676 known state (you don't know *what* they've done and not yet checked in),
677 so usually you'll precede the 'git update-index' with a
679 ----------------
680 $ git read-tree --reset HEAD
681 $ git update-index --refresh
682 ----------------
684 which will force a total index re-build from the tree pointed to by `HEAD`.
685 It resets the index contents to `HEAD`, and then the 'git update-index'
686 makes sure to match up all index entries with the checked-out files.
687 If the original repository had uncommitted changes in its
688 working tree, `git update-index --refresh` notices them and
689 tells you they need to be updated.
691 The above can also be written as simply
693 ----------------
694 $ git reset
695 ----------------
697 and in fact a lot of the common git command combinations can be scripted
698 with the `git xyz` interfaces.  You can learn things by just looking
699 at what the various git scripts do.  For example, `git reset` used to be
700 the above two lines implemented in 'git reset', but some things like
701 'git status' and 'git commit' are slightly more complex scripts around
702 the basic git commands.
704 Many (most?) public remote repositories will not contain any of
705 the checked out files or even an index file, and will *only* contain the
706 actual core git files. Such a repository usually doesn't even have the
707 `.git` subdirectory, but has all the git files directly in the
708 repository.
710 To create your own local live copy of such a "raw" git repository, you'd
711 first create your own subdirectory for the project, and then copy the
712 raw repository contents into the `.git` directory. For example, to
713 create your own copy of the git repository, you'd do the following
715 ----------------
716 $ mkdir my-git
717 $ cd my-git
718 $ rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ .git
719 ----------------
721 followed by
723 ----------------
724 $ git read-tree HEAD
725 ----------------
727 to populate the index. However, now you have populated the index, and
728 you have all the git internal files, but you will notice that you don't
729 actually have any of the working tree files to work on. To get
730 those, you'd check them out with
732 ----------------
733 $ git checkout-index -u -a
734 ----------------
736 where the `-u` flag means that you want the checkout to keep the index
737 up-to-date (so that you don't have to refresh it afterward), and the
738 `-a` flag means "check out all files" (if you have a stale copy or an
739 older version of a checked out tree you may also need to add the `-f`
740 flag first, to tell 'git checkout-index' to *force* overwriting of any old
741 files).
743 Again, this can all be simplified with
745 ----------------
746 $ git clone rsync://rsync.kernel.org/pub/scm/git/git.git/ my-git
747 $ cd my-git
748 $ git checkout
749 ----------------
751 which will end up doing all of the above for you.
753 You have now successfully copied somebody else's (mine) remote
754 repository, and checked it out.
757 Creating a new branch
758 ---------------------
760 Branches in git are really nothing more than pointers into the git
761 object database from within the `.git/refs/` subdirectory, and as we
762 already discussed, the `HEAD` branch is nothing but a symlink to one of
763 these object pointers.
765 You can at any time create a new branch by just picking an arbitrary
766 point in the project history, and just writing the SHA1 name of that
767 object into a file under `.git/refs/heads/`. You can use any filename you
768 want (and indeed, subdirectories), but the convention is that the
769 "normal" branch is called `master`. That's just a convention, though,
770 and nothing enforces it.
772 To show that as an example, let's go back to the git-tutorial repository we
773 used earlier, and create a branch in it. You do that by simply just
774 saying that you want to check out a new branch:
776 ------------
777 $ git checkout -b mybranch
778 ------------
780 will create a new branch based at the current `HEAD` position, and switch
781 to it.
783 [NOTE]
784 ================================================
785 If you make the decision to start your new branch at some
786 other point in the history than the current `HEAD`, you can do so by
787 just telling 'git checkout' what the base of the checkout would be.
788 In other words, if you have an earlier tag or branch, you'd just do
790 ------------
791 $ git checkout -b mybranch earlier-commit
792 ------------
794 and it would create the new branch `mybranch` at the earlier commit,
795 and check out the state at that time.
796 ================================================
798 You can always just jump back to your original `master` branch by doing
800 ------------
801 $ git checkout master
802 ------------
804 (or any other branch-name, for that matter) and if you forget which
805 branch you happen to be on, a simple
807 ------------
808 $ cat .git/HEAD
809 ------------
811 will tell you where it's pointing.  To get the list of branches
812 you have, you can say
814 ------------
815 $ git branch
816 ------------
818 which used to be nothing more than a simple script around `ls .git/refs/heads`.
819 There will be an asterisk in front of the branch you are currently on.
821 Sometimes you may wish to create a new branch _without_ actually
822 checking it out and switching to it. If so, just use the command
824 ------------
825 $ git branch <branchname> [startingpoint]
826 ------------
828 which will simply _create_ the branch, but will not do anything further.
829 You can then later -- once you decide that you want to actually develop
830 on that branch -- switch to that branch with a regular 'git checkout'
831 with the branchname as the argument.
834 Merging two branches
835 --------------------
837 One of the ideas of having a branch is that you do some (possibly
838 experimental) work in it, and eventually merge it back to the main
839 branch. So assuming you created the above `mybranch` that started out
840 being the same as the original `master` branch, let's make sure we're in
841 that branch, and do some work there.
843 ------------------------------------------------
844 $ git checkout mybranch
845 $ echo "Work, work, work" >>hello
846 $ git commit -m "Some work." -i hello
847 ------------------------------------------------
849 Here, we just added another line to `hello`, and we used a shorthand for
850 doing both `git update-index hello` and `git commit` by just giving the
851 filename directly to `git commit`, with an `-i` flag (it tells
852 git to 'include' that file in addition to what you have done to
853 the index file so far when making the commit).  The `-m` flag is to give the
854 commit log message from the command line.
856 Now, to make it a bit more interesting, let's assume that somebody else
857 does some work in the original branch, and simulate that by going back
858 to the master branch, and editing the same file differently there:
860 ------------
861 $ git checkout master
862 ------------
864 Here, take a moment to look at the contents of `hello`, and notice how they
865 don't contain the work we just did in `mybranch` -- because that work
866 hasn't happened in the `master` branch at all. Then do
868 ------------
869 $ echo "Play, play, play" >>hello
870 $ echo "Lots of fun" >>example
871 $ git commit -m "Some fun." -i hello example
872 ------------
874 since the master branch is obviously in a much better mood.
876 Now, you've got two branches, and you decide that you want to merge the
877 work done. Before we do that, let's introduce a cool graphical tool that
878 helps you view what's going on:
880 ----------------
881 $ gitk --all
882 ----------------
884 will show you graphically both of your branches (that's what the `--all`
885 means: normally it will just show you your current `HEAD`) and their
886 histories. You can also see exactly how they came to be from a common
887 source.
889 Anyway, let's exit 'gitk' (`^Q` or the File menu), and decide that we want
890 to merge the work we did on the `mybranch` branch into the `master`
891 branch (which is currently our `HEAD` too). To do that, there's a nice
892 script called 'git merge', which wants to know which branches you want
893 to resolve and what the merge is all about:
895 ------------
896 $ git merge -m "Merge work in mybranch" mybranch
897 ------------
899 where the first argument is going to be used as the commit message if
900 the merge can be resolved automatically.
902 Now, in this case we've intentionally created a situation where the
903 merge will need to be fixed up by hand, though, so git will do as much
904 of it as it can automatically (which in this case is just merge the `example`
905 file, which had no differences in the `mybranch` branch), and say:
907 ----------------
908         Auto-merging hello
909         CONFLICT (content): Merge conflict in hello
910         Automatic merge failed; fix conflicts and then commit the result.
911 ----------------
913 It tells you that it did an "Automatic merge", which
914 failed due to conflicts in `hello`.
916 Not to worry. It left the (trivial) conflict in `hello` in the same form you
917 should already be well used to if you've ever used CVS, so let's just
918 open `hello` in our editor (whatever that may be), and fix it up somehow.
919 I'd suggest just making it so that `hello` contains all four lines:
921 ------------
922 Hello World
923 It's a new day for git
924 Play, play, play
925 Work, work, work
926 ------------
928 and once you're happy with your manual merge, just do a
930 ------------
931 $ git commit -i hello
932 ------------
934 which will very loudly warn you that you're now committing a merge
935 (which is correct, so never mind), and you can write a small merge
936 message about your adventures in 'git merge'-land.
938 After you're done, start up `gitk --all` to see graphically what the
939 history looks like. Notice that `mybranch` still exists, and you can
940 switch to it, and continue to work with it if you want to. The
941 `mybranch` branch will not contain the merge, but next time you merge it
942 from the `master` branch, git will know how you merged it, so you'll not
943 have to do _that_ merge again.
945 Another useful tool, especially if you do not always work in X-Window
946 environment, is `git show-branch`.
948 ------------------------------------------------
949 $ git show-branch --topo-order --more=1 master mybranch
950 * [master] Merge work in mybranch
951  ! [mybranch] Some work.
953 -  [master] Merge work in mybranch
954 *+ [mybranch] Some work.
955 *  [master^] Some fun.
956 ------------------------------------------------
958 The first two lines indicate that it is showing the two branches
959 with the titles of their top-of-the-tree commits, you are currently on
960 `master` branch (notice the asterisk `*` character), and the first
961 column for the later output lines is used to show commits contained in the
962 `master` branch, and the second column for the `mybranch`
963 branch. Three commits are shown along with their titles.
964 All of them have non blank characters in the first column (`*`
965 shows an ordinary commit on the current branch, `-` is a merge commit), which
966 means they are now part of the `master` branch. Only the "Some
967 work" commit has the plus `+` character in the second column,
968 because `mybranch` has not been merged to incorporate these
969 commits from the master branch.  The string inside brackets
970 before the commit log message is a short name you can use to
971 name the commit.  In the above example, 'master' and 'mybranch'
972 are branch heads.  'master^' is the first parent of 'master'
973 branch head.  Please see linkgit:gitrevisions[7] if you want to
974 see more complex cases.
976 [NOTE]
977 Without the '--more=1' option, 'git show-branch' would not output the
978 '[master^]' commit, as '[mybranch]' commit is a common ancestor of
979 both 'master' and 'mybranch' tips.  Please see linkgit:git-show-branch[1]
980 for details.
982 [NOTE]
983 If there were more commits on the 'master' branch after the merge, the
984 merge commit itself would not be shown by 'git show-branch' by
985 default.  You would need to provide '--sparse' option to make the
986 merge commit visible in this case.
988 Now, let's pretend you are the one who did all the work in
989 `mybranch`, and the fruit of your hard work has finally been merged
990 to the `master` branch. Let's go back to `mybranch`, and run
991 'git merge' to get the "upstream changes" back to your branch.
993 ------------
994 $ git checkout mybranch
995 $ git merge -m "Merge upstream changes." master
996 ------------
998 This outputs something like this (the actual commit object names
999 would be different)
1001 ----------------
1002 Updating from ae3a2da... to a80b4aa....
1003 Fast-forward (no commit created; -m option ignored)
1004  example | 1 +
1005  hello   | 1 +
1006  2 files changed, 2 insertions(+)
1007 ----------------
1009 Because your branch did not contain anything more than what had
1010 already been merged into the `master` branch, the merge operation did
1011 not actually do a merge. Instead, it just updated the top of
1012 the tree of your branch to that of the `master` branch. This is
1013 often called 'fast-forward' merge.
1015 You can run `gitk --all` again to see how the commit ancestry
1016 looks like, or run 'show-branch', which tells you this.
1018 ------------------------------------------------
1019 $ git show-branch master mybranch
1020 ! [master] Merge work in mybranch
1021  * [mybranch] Merge work in mybranch
1023 -- [master] Merge work in mybranch
1024 ------------------------------------------------
1027 Merging external work
1028 ---------------------
1030 It's usually much more common that you merge with somebody else than
1031 merging with your own branches, so it's worth pointing out that git
1032 makes that very easy too, and in fact, it's not that different from
1033 doing a 'git merge'. In fact, a remote merge ends up being nothing
1034 more than "fetch the work from a remote repository into a temporary tag"
1035 followed by a 'git merge'.
1037 Fetching from a remote repository is done by, unsurprisingly,
1038 'git fetch':
1040 ----------------
1041 $ git fetch <remote-repository>
1042 ----------------
1044 One of the following transports can be used to name the
1045 repository to download from:
1047 Rsync::
1048         `rsync://remote.machine/path/to/repo.git/`
1050 Rsync transport is usable for both uploading and downloading,
1051 but is completely unaware of what git does, and can produce
1052 unexpected results when you download from the public repository
1053 while the repository owner is uploading into it via `rsync`
1054 transport.  Most notably, it could update the files under
1055 `refs/` which holds the object name of the topmost commits
1056 before uploading the files in `objects/` -- the downloader would
1057 obtain head commit object name while that object itself is still
1058 not available in the repository.  For this reason, it is
1059 considered deprecated.
1061 SSH::
1062         `remote.machine:/path/to/repo.git/` or
1064 `ssh://remote.machine/path/to/repo.git/`
1066 This transport can be used for both uploading and downloading,
1067 and requires you to have a log-in privilege over `ssh` to the
1068 remote machine.  It finds out the set of objects the other side
1069 lacks by exchanging the head commits both ends have and
1070 transfers (close to) minimum set of objects.  It is by far the
1071 most efficient way to exchange git objects between repositories.
1073 Local directory::
1074         `/path/to/repo.git/`
1076 This transport is the same as SSH transport but uses 'sh' to run
1077 both ends on the local machine instead of running other end on
1078 the remote machine via 'ssh'.
1080 git Native::
1081         `git://remote.machine/path/to/repo.git/`
1083 This transport was designed for anonymous downloading.  Like SSH
1084 transport, it finds out the set of objects the downstream side
1085 lacks and transfers (close to) minimum set of objects.
1087 HTTP(S)::
1088         `http://remote.machine/path/to/repo.git/`
1090 Downloader from http and https URL
1091 first obtains the topmost commit object name from the remote site
1092 by looking at the specified refname under `repo.git/refs/` directory,
1093 and then tries to obtain the
1094 commit object by downloading from `repo.git/objects/xx/xxx...`
1095 using the object name of that commit object.  Then it reads the
1096 commit object to find out its parent commits and the associate
1097 tree object; it repeats this process until it gets all the
1098 necessary objects.  Because of this behavior, they are
1099 sometimes also called 'commit walkers'.
1101 The 'commit walkers' are sometimes also called 'dumb
1102 transports', because they do not require any git aware smart
1103 server like git Native transport does.  Any stock HTTP server
1104 that does not even support directory index would suffice.  But
1105 you must prepare your repository with 'git update-server-info'
1106 to help dumb transport downloaders.
1108 Once you fetch from the remote repository, you `merge` that
1109 with your current branch.
1111 However -- it's such a common thing to `fetch` and then
1112 immediately `merge`, that it's called `git pull`, and you can
1113 simply do
1115 ----------------
1116 $ git pull <remote-repository>
1117 ----------------
1119 and optionally give a branch-name for the remote end as a second
1120 argument.
1122 [NOTE]
1123 You could do without using any branches at all, by
1124 keeping as many local repositories as you would like to have
1125 branches, and merging between them with 'git pull', just like
1126 you merge between branches. The advantage of this approach is
1127 that it lets you keep a set of files for each `branch` checked
1128 out and you may find it easier to switch back and forth if you
1129 juggle multiple lines of development simultaneously. Of
1130 course, you will pay the price of more disk usage to hold
1131 multiple working trees, but disk space is cheap these days.
1133 It is likely that you will be pulling from the same remote
1134 repository from time to time. As a short hand, you can store
1135 the remote repository URL in the local repository's config file
1136 like this:
1138 ------------------------------------------------
1139 $ git config remote.linus.url http://www.kernel.org/pub/scm/git/git.git/
1140 ------------------------------------------------
1142 and use the "linus" keyword with 'git pull' instead of the full URL.
1144 Examples.
1146 . `git pull linus`
1147 . `git pull linus tag v0.99.1`
1149 the above are equivalent to:
1151 . `git pull http://www.kernel.org/pub/scm/git/git.git/ HEAD`
1152 . `git pull http://www.kernel.org/pub/scm/git/git.git/ tag v0.99.1`
1155 How does the merge work?
1156 ------------------------
1158 We said this tutorial shows what plumbing does to help you cope
1159 with the porcelain that isn't flushing, but we so far did not
1160 talk about how the merge really works.  If you are following
1161 this tutorial the first time, I'd suggest to skip to "Publishing
1162 your work" section and come back here later.
1164 OK, still with me?  To give us an example to look at, let's go
1165 back to the earlier repository with "hello" and "example" file,
1166 and bring ourselves back to the pre-merge state:
1168 ------------
1169 $ git show-branch --more=2 master mybranch
1170 ! [master] Merge work in mybranch
1171  * [mybranch] Merge work in mybranch
1173 -- [master] Merge work in mybranch
1174 +* [master^2] Some work.
1175 +* [master^] Some fun.
1176 ------------
1178 Remember, before running 'git merge', our `master` head was at
1179 "Some fun." commit, while our `mybranch` head was at "Some
1180 work." commit.
1182 ------------
1183 $ git checkout mybranch
1184 $ git reset --hard master^2
1185 $ git checkout master
1186 $ git reset --hard master^
1187 ------------
1189 After rewinding, the commit structure should look like this:
1191 ------------
1192 $ git show-branch
1193 * [master] Some fun.
1194  ! [mybranch] Some work.
1196 *  [master] Some fun.
1197  + [mybranch] Some work.
1198 *+ [master^] Initial commit
1199 ------------
1201 Now we are ready to experiment with the merge by hand.
1203 `git merge` command, when merging two branches, uses 3-way merge
1204 algorithm.  First, it finds the common ancestor between them.
1205 The command it uses is 'git merge-base':
1207 ------------
1208 $ mb=$(git merge-base HEAD mybranch)
1209 ------------
1211 The command writes the commit object name of the common ancestor
1212 to the standard output, so we captured its output to a variable,
1213 because we will be using it in the next step.  By the way, the common
1214 ancestor commit is the "Initial commit" commit in this case.  You can
1215 tell it by:
1217 ------------
1218 $ git name-rev --name-only --tags $mb
1219 my-first-tag
1220 ------------
1222 After finding out a common ancestor commit, the second step is
1223 this:
1225 ------------
1226 $ git read-tree -m -u $mb HEAD mybranch
1227 ------------
1229 This is the same 'git read-tree' command we have already seen,
1230 but it takes three trees, unlike previous examples.  This reads
1231 the contents of each tree into different 'stage' in the index
1232 file (the first tree goes to stage 1, the second to stage 2,
1233 etc.).  After reading three trees into three stages, the paths
1234 that are the same in all three stages are 'collapsed' into stage
1235 0.  Also paths that are the same in two of three stages are
1236 collapsed into stage 0, taking the SHA1 from either stage 2 or
1237 stage 3, whichever is different from stage 1 (i.e. only one side
1238 changed from the common ancestor).
1240 After 'collapsing' operation, paths that are different in three
1241 trees are left in non-zero stages.  At this point, you can
1242 inspect the index file with this command:
1244 ------------
1245 $ git ls-files --stage
1246 100644 7f8b141b65fdcee47321e399a2598a235a032422 0       example
1247 100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1       hello
1248 100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2       hello
1249 100644 cc44c73eb783565da5831b4d820c962954019b69 3       hello
1250 ------------
1252 In our example of only two files, we did not have unchanged
1253 files so only 'example' resulted in collapsing.  But in real-life
1254 large projects, when only a small number of files change in one commit,
1255 this 'collapsing' tends to trivially merge most of the paths
1256 fairly quickly, leaving only a handful of real changes in non-zero
1257 stages.
1259 To look at only non-zero stages, use `--unmerged` flag:
1261 ------------
1262 $ git ls-files --unmerged
1263 100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1       hello
1264 100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2       hello
1265 100644 cc44c73eb783565da5831b4d820c962954019b69 3       hello
1266 ------------
1268 The next step of merging is to merge these three versions of the
1269 file, using 3-way merge.  This is done by giving
1270 'git merge-one-file' command as one of the arguments to
1271 'git merge-index' command:
1273 ------------
1274 $ git merge-index git-merge-one-file hello
1275 Auto-merging hello
1276 ERROR: Merge conflict in hello
1277 fatal: merge program failed
1278 ------------
1280 'git merge-one-file' script is called with parameters to
1281 describe those three versions, and is responsible to leave the
1282 merge results in the working tree.
1283 It is a fairly straightforward shell script, and
1284 eventually calls 'merge' program from RCS suite to perform a
1285 file-level 3-way merge.  In this case, 'merge' detects
1286 conflicts, and the merge result with conflict marks is left in
1287 the working tree..  This can be seen if you run `ls-files
1288 --stage` again at this point:
1290 ------------
1291 $ git ls-files --stage
1292 100644 7f8b141b65fdcee47321e399a2598a235a032422 0       example
1293 100644 557db03de997c86a4a028e1ebd3a1ceb225be238 1       hello
1294 100644 ba42a2a96e3027f3333e13ede4ccf4498c3ae942 2       hello
1295 100644 cc44c73eb783565da5831b4d820c962954019b69 3       hello
1296 ------------
1298 This is the state of the index file and the working file after
1299 'git merge' returns control back to you, leaving the conflicting
1300 merge for you to resolve.  Notice that the path `hello` is still
1301 unmerged, and what you see with 'git diff' at this point is
1302 differences since stage 2 (i.e. your version).
1305 Publishing your work
1306 --------------------
1308 So, we can use somebody else's work from a remote repository, but
1309 how can *you* prepare a repository to let other people pull from
1312 You do your real work in your working tree that has your
1313 primary repository hanging under it as its `.git` subdirectory.
1314 You *could* make that repository accessible remotely and ask
1315 people to pull from it, but in practice that is not the way
1316 things are usually done. A recommended way is to have a public
1317 repository, make it reachable by other people, and when the
1318 changes you made in your primary working tree are in good shape,
1319 update the public repository from it. This is often called
1320 'pushing'.
1322 [NOTE]
1323 This public repository could further be mirrored, and that is
1324 how git repositories at `kernel.org` are managed.
1326 Publishing the changes from your local (private) repository to
1327 your remote (public) repository requires a write privilege on
1328 the remote machine. You need to have an SSH account there to
1329 run a single command, 'git-receive-pack'.
1331 First, you need to create an empty repository on the remote
1332 machine that will house your public repository. This empty
1333 repository will be populated and be kept up-to-date by pushing
1334 into it later. Obviously, this repository creation needs to be
1335 done only once.
1337 [NOTE]
1338 'git push' uses a pair of commands,
1339 'git send-pack' on your local machine, and 'git-receive-pack'
1340 on the remote machine. The communication between the two over
1341 the network internally uses an SSH connection.
1343 Your private repository's git directory is usually `.git`, but
1344 your public repository is often named after the project name,
1345 i.e. `<project>.git`. Let's create such a public repository for
1346 project `my-git`. After logging into the remote machine, create
1347 an empty directory:
1349 ------------
1350 $ mkdir my-git.git
1351 ------------
1353 Then, make that directory into a git repository by running
1354 'git init', but this time, since its name is not the usual
1355 `.git`, we do things slightly differently:
1357 ------------
1358 $ GIT_DIR=my-git.git git init
1359 ------------
1361 Make sure this directory is available for others you want your
1362 changes to be pulled via the transport of your choice. Also
1363 you need to make sure that you have the 'git-receive-pack'
1364 program on the `$PATH`.
1366 [NOTE]
1367 Many installations of sshd do not invoke your shell as the login
1368 shell when you directly run programs; what this means is that if
1369 your login shell is 'bash', only `.bashrc` is read and not
1370 `.bash_profile`. As a workaround, make sure `.bashrc` sets up
1371 `$PATH` so that you can run 'git-receive-pack' program.
1373 [NOTE]
1374 If you plan to publish this repository to be accessed over http,
1375 you should do `mv my-git.git/hooks/post-update.sample
1376 my-git.git/hooks/post-update` at this point.
1377 This makes sure that every time you push into this
1378 repository, `git update-server-info` is run.
1380 Your "public repository" is now ready to accept your changes.
1381 Come back to the machine you have your private repository. From
1382 there, run this command:
1384 ------------
1385 $ git push <public-host>:/path/to/my-git.git master
1386 ------------
1388 This synchronizes your public repository to match the named
1389 branch head (i.e. `master` in this case) and objects reachable
1390 from them in your current repository.
1392 As a real example, this is how I update my public git
1393 repository. Kernel.org mirror network takes care of the
1394 propagation to other publicly visible machines:
1396 ------------
1397 $ git push master.kernel.org:/pub/scm/git/git.git/
1398 ------------
1401 Packing your repository
1402 -----------------------
1404 Earlier, we saw that one file under `.git/objects/??/` directory
1405 is stored for each git object you create. This representation
1406 is efficient to create atomically and safely, but
1407 not so convenient to transport over the network. Since git objects are
1408 immutable once they are created, there is a way to optimize the
1409 storage by "packing them together". The command
1411 ------------
1412 $ git repack
1413 ------------
1415 will do it for you. If you followed the tutorial examples, you
1416 would have accumulated about 17 objects in `.git/objects/??/`
1417 directories by now. 'git repack' tells you how many objects it
1418 packed, and stores the packed file in `.git/objects/pack`
1419 directory.
1421 [NOTE]
1422 You will see two files, `pack-*.pack` and `pack-*.idx`,
1423 in `.git/objects/pack` directory. They are closely related to
1424 each other, and if you ever copy them by hand to a different
1425 repository for whatever reason, you should make sure you copy
1426 them together. The former holds all the data from the objects
1427 in the pack, and the latter holds the index for random
1428 access.
1430 If you are paranoid, running 'git verify-pack' command would
1431 detect if you have a corrupt pack, but do not worry too much.
1432 Our programs are always perfect ;-).
1434 Once you have packed objects, you do not need to leave the
1435 unpacked objects that are contained in the pack file anymore.
1437 ------------
1438 $ git prune-packed
1439 ------------
1441 would remove them for you.
1443 You can try running `find .git/objects -type f` before and after
1444 you run `git prune-packed` if you are curious.  Also `git
1445 count-objects` would tell you how many unpacked objects are in
1446 your repository and how much space they are consuming.
1448 [NOTE]
1449 `git pull` is slightly cumbersome for HTTP transport, as a
1450 packed repository may contain relatively few objects in a
1451 relatively large pack. If you expect many HTTP pulls from your
1452 public repository you might want to repack & prune often, or
1453 never.
1455 If you run `git repack` again at this point, it will say
1456 "Nothing new to pack.". Once you continue your development and
1457 accumulate the changes, running `git repack` again will create a
1458 new pack, that contains objects created since you packed your
1459 repository the last time. We recommend that you pack your project
1460 soon after the initial import (unless you are starting your
1461 project from scratch), and then run `git repack` every once in a
1462 while, depending on how active your project is.
1464 When a repository is synchronized via `git push` and `git pull`
1465 objects packed in the source repository are usually stored
1466 unpacked in the destination, unless rsync transport is used.
1467 While this allows you to use different packing strategies on
1468 both ends, it also means you may need to repack both
1469 repositories every once in a while.
1472 Working with Others
1473 -------------------
1475 Although git is a truly distributed system, it is often
1476 convenient to organize your project with an informal hierarchy
1477 of developers. Linux kernel development is run this way. There
1478 is a nice illustration (page 17, "Merges to Mainline") in
1479 link:http://www.xenotime.net/linux/mentor/linux-mentoring-2006.pdf[Randy Dunlap's presentation].
1481 It should be stressed that this hierarchy is purely *informal*.
1482 There is nothing fundamental in git that enforces the "chain of
1483 patch flow" this hierarchy implies. You do not have to pull
1484 from only one remote repository.
1486 A recommended workflow for a "project lead" goes like this:
1488 1. Prepare your primary repository on your local machine. Your
1489    work is done there.
1491 2. Prepare a public repository accessible to others.
1493 If other people are pulling from your repository over dumb
1494 transport protocols (HTTP), you need to keep this repository
1495 'dumb transport friendly'.  After `git init`,
1496 `$GIT_DIR/hooks/post-update.sample` copied from the standard templates
1497 would contain a call to 'git update-server-info'
1498 but you need to manually enable the hook with
1499 `mv post-update.sample post-update`.  This makes sure
1500 'git update-server-info' keeps the necessary files up-to-date.
1502 3. Push into the public repository from your primary
1503    repository.
1505 4. 'git repack' the public repository. This establishes a big
1506    pack that contains the initial set of objects as the
1507    baseline, and possibly 'git prune' if the transport
1508    used for pulling from your repository supports packed
1509    repositories.
1511 5. Keep working in your primary repository. Your changes
1512    include modifications of your own, patches you receive via
1513    e-mails, and merges resulting from pulling the "public"
1514    repositories of your "subsystem maintainers".
1516 You can repack this private repository whenever you feel like.
1518 6. Push your changes to the public repository, and announce it
1519    to the public.
1521 7. Every once in a while, 'git repack' the public repository.
1522    Go back to step 5. and continue working.
1525 A recommended work cycle for a "subsystem maintainer" who works
1526 on that project and has an own "public repository" goes like this:
1528 1. Prepare your work repository, by 'git clone' the public
1529    repository of the "project lead". The URL used for the
1530    initial cloning is stored in the remote.origin.url
1531    configuration variable.
1533 2. Prepare a public repository accessible to others, just like
1534    the "project lead" person does.
1536 3. Copy over the packed files from "project lead" public
1537    repository to your public repository, unless the "project
1538    lead" repository lives on the same machine as yours.  In the
1539    latter case, you can use `objects/info/alternates` file to
1540    point at the repository you are borrowing from.
1542 4. Push into the public repository from your primary
1543    repository. Run 'git repack', and possibly 'git prune' if the
1544    transport used for pulling from your repository supports
1545    packed repositories.
1547 5. Keep working in your primary repository. Your changes
1548    include modifications of your own, patches you receive via
1549    e-mails, and merges resulting from pulling the "public"
1550    repositories of your "project lead" and possibly your
1551    "sub-subsystem maintainers".
1553 You can repack this private repository whenever you feel
1554 like.
1556 6. Push your changes to your public repository, and ask your
1557    "project lead" and possibly your "sub-subsystem
1558    maintainers" to pull from it.
1560 7. Every once in a while, 'git repack' the public repository.
1561    Go back to step 5. and continue working.
1564 A recommended work cycle for an "individual developer" who does
1565 not have a "public" repository is somewhat different. It goes
1566 like this:
1568 1. Prepare your work repository, by 'git clone' the public
1569    repository of the "project lead" (or a "subsystem
1570    maintainer", if you work on a subsystem). The URL used for
1571    the initial cloning is stored in the remote.origin.url
1572    configuration variable.
1574 2. Do your work in your repository on 'master' branch.
1576 3. Run `git fetch origin` from the public repository of your
1577    upstream every once in a while. This does only the first
1578    half of `git pull` but does not merge. The head of the
1579    public repository is stored in `.git/refs/remotes/origin/master`.
1581 4. Use `git cherry origin` to see which ones of your patches
1582    were accepted, and/or use `git rebase origin` to port your
1583    unmerged changes forward to the updated upstream.
1585 5. Use `git format-patch origin` to prepare patches for e-mail
1586    submission to your upstream and send it out. Go back to
1587    step 2. and continue.
1590 Working with Others, Shared Repository Style
1591 --------------------------------------------
1593 If you are coming from CVS background, the style of cooperation
1594 suggested in the previous section may be new to you. You do not
1595 have to worry. git supports "shared public repository" style of
1596 cooperation you are probably more familiar with as well.
1598 See linkgit:gitcvs-migration[7] for the details.
1600 Bundling your work together
1601 ---------------------------
1603 It is likely that you will be working on more than one thing at
1604 a time.  It is easy to manage those more-or-less independent tasks
1605 using branches with git.
1607 We have already seen how branches work previously,
1608 with "fun and work" example using two branches.  The idea is the
1609 same if there are more than two branches.  Let's say you started
1610 out from "master" head, and have some new code in the "master"
1611 branch, and two independent fixes in the "commit-fix" and
1612 "diff-fix" branches:
1614 ------------
1615 $ git show-branch
1616 ! [commit-fix] Fix commit message normalization.
1617  ! [diff-fix] Fix rename detection.
1618   * [master] Release candidate #1
1620  +  [diff-fix] Fix rename detection.
1621  +  [diff-fix~1] Better common substring algorithm.
1622 +   [commit-fix] Fix commit message normalization.
1623   * [master] Release candidate #1
1624 ++* [diff-fix~2] Pretty-print messages.
1625 ------------
1627 Both fixes are tested well, and at this point, you want to merge
1628 in both of them.  You could merge in 'diff-fix' first and then
1629 'commit-fix' next, like this:
1631 ------------
1632 $ git merge -m "Merge fix in diff-fix" diff-fix
1633 $ git merge -m "Merge fix in commit-fix" commit-fix
1634 ------------
1636 Which would result in:
1638 ------------
1639 $ git show-branch
1640 ! [commit-fix] Fix commit message normalization.
1641  ! [diff-fix] Fix rename detection.
1642   * [master] Merge fix in commit-fix
1644   - [master] Merge fix in commit-fix
1645 + * [commit-fix] Fix commit message normalization.
1646   - [master~1] Merge fix in diff-fix
1647  +* [diff-fix] Fix rename detection.
1648  +* [diff-fix~1] Better common substring algorithm.
1649   * [master~2] Release candidate #1
1650 ++* [master~3] Pretty-print messages.
1651 ------------
1653 However, there is no particular reason to merge in one branch
1654 first and the other next, when what you have are a set of truly
1655 independent changes (if the order mattered, then they are not
1656 independent by definition).  You could instead merge those two
1657 branches into the current branch at once.  First let's undo what
1658 we just did and start over.  We would want to get the master
1659 branch before these two merges by resetting it to 'master~2':
1661 ------------
1662 $ git reset --hard master~2
1663 ------------
1665 You can make sure `git show-branch` matches the state before
1666 those two 'git merge' you just did.  Then, instead of running
1667 two 'git merge' commands in a row, you would merge these two
1668 branch heads (this is known as 'making an Octopus'):
1670 ------------
1671 $ git merge commit-fix diff-fix
1672 $ git show-branch
1673 ! [commit-fix] Fix commit message normalization.
1674  ! [diff-fix] Fix rename detection.
1675   * [master] Octopus merge of branches 'diff-fix' and 'commit-fix'
1677   - [master] Octopus merge of branches 'diff-fix' and 'commit-fix'
1678 + * [commit-fix] Fix commit message normalization.
1679  +* [diff-fix] Fix rename detection.
1680  +* [diff-fix~1] Better common substring algorithm.
1681   * [master~1] Release candidate #1
1682 ++* [master~2] Pretty-print messages.
1683 ------------
1685 Note that you should not do Octopus because you can.  An octopus
1686 is a valid thing to do and often makes it easier to view the
1687 commit history if you are merging more than two independent
1688 changes at the same time.  However, if you have merge conflicts
1689 with any of the branches you are merging in and need to hand
1690 resolve, that is an indication that the development happened in
1691 those branches were not independent after all, and you should
1692 merge two at a time, documenting how you resolved the conflicts,
1693 and the reason why you preferred changes made in one side over
1694 the other.  Otherwise it would make the project history harder
1695 to follow, not easier.
1697 SEE ALSO
1698 --------
1699 linkgit:gittutorial[7],
1700 linkgit:gittutorial-2[7],
1701 linkgit:gitcvs-migration[7],
1702 linkgit:git-help[1],
1703 link:everyday.html[Everyday git],
1704 link:user-manual.html[The Git User's Manual]
1708 Part of the linkgit:git[1] suite.