Sync with 1.8.1.5
[git/jnareb-git.git] / Documentation / gitcvs-migration.txt
blob5ab5b0727f6ce7683fd8282449b6a9fa98b1e135
1 gitcvs-migration(7)
2 ===================
4 NAME
5 ----
6 gitcvs-migration - Git for CVS users
8 SYNOPSIS
9 --------
10 [verse]
11 'git cvsimport' *
13 DESCRIPTION
14 -----------
16 Git differs from CVS in that every working tree contains a repository with
17 a full copy of the project history, and no repository is inherently more
18 important than any other.  However, you can emulate the CVS model by
19 designating a single shared repository which people can synchronize with;
20 this document explains how to do that.
22 Some basic familiarity with Git is required. Having gone through
23 linkgit:gittutorial[7] and
24 linkgit:gitglossary[7] should be sufficient.
26 Developing against a shared repository
27 --------------------------------------
29 Suppose a shared repository is set up in /pub/repo.git on the host
30 foo.com.  Then as an individual committer you can clone the shared
31 repository over ssh with:
33 ------------------------------------------------
34 $ git clone foo.com:/pub/repo.git/ my-project
35 $ cd my-project
36 ------------------------------------------------
38 and hack away.  The equivalent of 'cvs update' is
40 ------------------------------------------------
41 $ git pull origin
42 ------------------------------------------------
44 which merges in any work that others might have done since the clone
45 operation.  If there are uncommitted changes in your working tree, commit
46 them first before running git pull.
48 [NOTE]
49 ================================
50 The 'pull' command knows where to get updates from because of certain
51 configuration variables that were set by the first 'git clone'
52 command; see `git config -l` and the linkgit:git-config[1] man
53 page for details.
54 ================================
56 You can update the shared repository with your changes by first committing
57 your changes, and then using the 'git push' command:
59 ------------------------------------------------
60 $ git push origin master
61 ------------------------------------------------
63 to "push" those commits to the shared repository.  If someone else has
64 updated the repository more recently, 'git push', like 'cvs commit', will
65 complain, in which case you must pull any changes before attempting the
66 push again.
68 In the 'git push' command above we specify the name of the remote branch
69 to update (`master`).  If we leave that out, 'git push' tries to update
70 any branches in the remote repository that have the same name as a branch
71 in the local repository.  So the last 'push' can be done with either of:
73 ------------
74 $ git push origin
75 $ git push foo.com:/pub/project.git/
76 ------------
78 as long as the shared repository does not have any branches
79 other than `master`.
81 Setting Up a Shared Repository
82 ------------------------------
84 We assume you have already created a Git repository for your project,
85 possibly created from scratch or from a tarball (see
86 linkgit:gittutorial[7]), or imported from an already existing CVS
87 repository (see the next section).
89 Assume your existing repo is at /home/alice/myproject.  Create a new "bare"
90 repository (a repository without a working tree) and fetch your project into
91 it:
93 ------------------------------------------------
94 $ mkdir /pub/my-repo.git
95 $ cd /pub/my-repo.git
96 $ git --bare init --shared
97 $ git --bare fetch /home/alice/myproject master:master
98 ------------------------------------------------
100 Next, give every team member read/write access to this repository.  One
101 easy way to do this is to give all the team members ssh access to the
102 machine where the repository is hosted.  If you don't want to give them a
103 full shell on the machine, there is a restricted shell which only allows
104 users to do Git pushes and pulls; see linkgit:git-shell[1].
106 Put all the committers in the same group, and make the repository
107 writable by that group:
109 ------------------------------------------------
110 $ chgrp -R $group /pub/my-repo.git
111 ------------------------------------------------
113 Make sure committers have a umask of at most 027, so that the directories
114 they create are writable and searchable by other group members.
116 Importing a CVS archive
117 -----------------------
119 First, install version 2.1 or higher of cvsps from
120 link:http://www.cobite.com/cvsps/[http://www.cobite.com/cvsps/] and make
121 sure it is in your path.  Then cd to a checked out CVS working directory
122 of the project you are interested in and run linkgit:git-cvsimport[1]:
124 -------------------------------------------
125 $ git cvsimport -C <destination> <module>
126 -------------------------------------------
128 This puts a Git archive of the named CVS module in the directory
129 <destination>, which will be created if necessary.
131 The import checks out from CVS every revision of every file.  Reportedly
132 cvsimport can average some twenty revisions per second, so for a
133 medium-sized project this should not take more than a couple of minutes.
134 Larger projects or remote repositories may take longer.
136 The main trunk is stored in the Git branch named `origin`, and additional
137 CVS branches are stored in Git branches with the same names.  The most
138 recent version of the main trunk is also left checked out on the `master`
139 branch, so you can start adding your own changes right away.
141 The import is incremental, so if you call it again next month it will
142 fetch any CVS updates that have been made in the meantime.  For this to
143 work, you must not modify the imported branches; instead, create new
144 branches for your own changes, and merge in the imported branches as
145 necessary.
147 If you want a shared repository, you will need to make a bare clone
148 of the imported directory, as described above. Then treat the imported
149 directory as another development clone for purposes of merging
150 incremental imports.
152 Advanced Shared Repository Management
153 -------------------------------------
155 Git allows you to specify scripts called "hooks" to be run at certain
156 points.  You can use these, for example, to send all commits to the shared
157 repository to a mailing list.  See linkgit:githooks[5].
159 You can enforce finer grained permissions using update hooks.  See
160 link:howto/update-hook-example.txt[Controlling access to branches using
161 update hooks].
163 Providing CVS Access to a Git Repository
164 ----------------------------------------
166 It is also possible to provide true CVS access to a Git repository, so
167 that developers can still use CVS; see linkgit:git-cvsserver[1] for
168 details.
170 Alternative Development Models
171 ------------------------------
173 CVS users are accustomed to giving a group of developers commit access to
174 a common repository.  As we've seen, this is also possible with Git.
175 However, the distributed nature of Git allows other development models,
176 and you may want to first consider whether one of them might be a better
177 fit for your project.
179 For example, you can choose a single person to maintain the project's
180 primary public repository.  Other developers then clone this repository
181 and each work in their own clone.  When they have a series of changes that
182 they're happy with, they ask the maintainer to pull from the branch
183 containing the changes.  The maintainer reviews their changes and pulls
184 them into the primary repository, which other developers pull from as
185 necessary to stay coordinated.  The Linux kernel and other projects use
186 variants of this model.
188 With a small group, developers may just pull changes from each other's
189 repositories without the need for a central maintainer.
191 SEE ALSO
192 --------
193 linkgit:gittutorial[7],
194 linkgit:gittutorial-2[7],
195 linkgit:gitcore-tutorial[7],
196 linkgit:gitglossary[7],
197 link:everyday.html[Everyday Git],
198 link:user-manual.html[The Git User's Manual]
202 Part of the linkgit:git[1] suite.