blame.c: Properly initialize strbuf after calling, textconv_object()
[git/dscho.git] / setup.c
blob276916052795c5ffa872b57a7e6723edc71dfdc4
1 #include "cache.h"
2 #include "dir.h"
4 static int inside_git_dir = -1;
5 static int inside_work_tree = -1;
7 const char *prefix_path(const char *prefix, int len, const char *path)
9 const char *orig = path;
10 char *sanitized = xmalloc(len + strlen(path) + 1);
11 if (is_absolute_path(orig))
12 strcpy(sanitized, path);
13 else {
14 if (len)
15 memcpy(sanitized, prefix, len);
16 strcpy(sanitized + len, path);
18 if (normalize_path_copy(sanitized, sanitized))
19 goto error_out;
20 if (is_absolute_path(orig)) {
21 size_t root_len, len, total;
22 const char *work_tree = get_git_work_tree();
23 if (!work_tree)
24 goto error_out;
25 len = strlen(work_tree);
26 root_len = offset_1st_component(work_tree);
27 total = strlen(sanitized) + 1;
28 if (strncmp(sanitized, work_tree, len) ||
29 (len > root_len && sanitized[len] != '\0' && sanitized[len] != '/')) {
30 error_out:
31 die("'%s' is outside repository", orig);
33 if (sanitized[len] == '/')
34 len++;
35 memmove(sanitized, sanitized + len, total - len);
37 return sanitized;
41 * Unlike prefix_path, this should be used if the named file does
42 * not have to interact with index entry; i.e. name of a random file
43 * on the filesystem.
45 const char *prefix_filename(const char *pfx, int pfx_len, const char *arg)
47 static char path[PATH_MAX];
48 #ifndef WIN32
49 if (!pfx || !*pfx || is_absolute_path(arg))
50 return arg;
51 memcpy(path, pfx, pfx_len);
52 strcpy(path + pfx_len, arg);
53 #else
54 char *p;
55 /* don't add prefix to absolute paths, but still replace '\' by '/' */
56 if (is_absolute_path(arg))
57 pfx_len = 0;
58 else
59 memcpy(path, pfx, pfx_len);
60 strcpy(path + pfx_len, arg);
61 for (p = path + pfx_len; *p; p++)
62 if (*p == '\\')
63 *p = '/';
64 #endif
65 return path;
68 int check_filename(const char *prefix, const char *arg)
70 const char *name;
71 struct stat st;
73 name = prefix ? prefix_filename(prefix, strlen(prefix), arg) : arg;
74 if (!lstat(name, &st))
75 return 1; /* file exists */
76 if (errno == ENOENT || errno == ENOTDIR)
77 return 0; /* file does not exist */
78 die_errno("failed to stat '%s'", arg);
81 static void NORETURN die_verify_filename(const char *prefix, const char *arg)
83 unsigned char sha1[20];
84 unsigned mode;
85 /* try a detailed diagnostic ... */
86 get_sha1_with_mode_1(arg, sha1, &mode, 0, prefix);
87 /* ... or fall back the most general message. */
88 die("ambiguous argument '%s': unknown revision or path not in the working tree.\n"
89 "Use '--' to separate paths from revisions", arg);
94 * Verify a filename that we got as an argument for a pathspec
95 * entry. Note that a filename that begins with "-" never verifies
96 * as true, because even if such a filename were to exist, we want
97 * it to be preceded by the "--" marker (or we want the user to
98 * use a format like "./-filename")
100 void verify_filename(const char *prefix, const char *arg)
102 if (*arg == '-')
103 die("bad flag '%s' used after filename", arg);
104 if (check_filename(prefix, arg))
105 return;
106 die_verify_filename(prefix, arg);
110 * Opposite of the above: the command line did not have -- marker
111 * and we parsed the arg as a refname. It should not be interpretable
112 * as a filename.
114 void verify_non_filename(const char *prefix, const char *arg)
116 if (!is_inside_work_tree() || is_inside_git_dir())
117 return;
118 if (*arg == '-')
119 return; /* flag */
120 if (!check_filename(prefix, arg))
121 return;
122 die("ambiguous argument '%s': both revision and filename\n"
123 "Use '--' to separate filenames from revisions", arg);
126 const char **get_pathspec(const char *prefix, const char **pathspec)
128 const char *entry = *pathspec;
129 const char **src, **dst;
130 int prefixlen;
132 if (!prefix && !entry)
133 return NULL;
135 if (!entry) {
136 static const char *spec[2];
137 spec[0] = prefix;
138 spec[1] = NULL;
139 return spec;
142 /* Otherwise we have to re-write the entries.. */
143 src = pathspec;
144 dst = pathspec;
145 prefixlen = prefix ? strlen(prefix) : 0;
146 while (*src) {
147 const char *p = prefix_path(prefix, prefixlen, *src);
148 *(dst++) = p;
149 src++;
151 *dst = NULL;
152 if (!*pathspec)
153 return NULL;
154 return pathspec;
158 * Test if it looks like we're at a git directory.
159 * We want to see:
161 * - either an objects/ directory _or_ the proper
162 * GIT_OBJECT_DIRECTORY environment variable
163 * - a refs/ directory
164 * - either a HEAD symlink or a HEAD file that is formatted as
165 * a proper "ref:", or a regular file HEAD that has a properly
166 * formatted sha1 object name.
168 static int is_git_directory(const char *suspect)
170 char path[PATH_MAX];
171 size_t len = strlen(suspect);
173 if (PATH_MAX <= len + strlen("/objects"))
174 die("Too long path: %.*s", 60, suspect);
175 strcpy(path, suspect);
176 if (getenv(DB_ENVIRONMENT)) {
177 if (access(getenv(DB_ENVIRONMENT), X_OK))
178 return 0;
180 else {
181 strcpy(path + len, "/objects");
182 if (access(path, X_OK))
183 return 0;
186 strcpy(path + len, "/refs");
187 if (access(path, X_OK))
188 return 0;
190 strcpy(path + len, "/HEAD");
191 if (validate_headref(path))
192 return 0;
194 return 1;
197 int is_inside_git_dir(void)
199 if (inside_git_dir < 0)
200 inside_git_dir = is_inside_dir(get_git_dir());
201 return inside_git_dir;
204 int is_inside_work_tree(void)
206 if (inside_work_tree < 0)
207 inside_work_tree = is_inside_dir(get_git_work_tree());
208 return inside_work_tree;
212 * set_work_tree() is only ever called if you set GIT_DIR explicitly.
213 * The old behaviour (which we retain here) is to set the work tree root
214 * to the cwd, unless overridden by the config, the command line, or
215 * GIT_WORK_TREE.
217 static const char *set_work_tree(const char *dir)
219 char buffer[PATH_MAX + 1];
221 if (!getcwd(buffer, sizeof(buffer)))
222 die ("Could not get the current working directory");
223 git_work_tree_cfg = xstrdup(buffer);
224 inside_work_tree = 1;
226 return NULL;
229 void setup_work_tree(void)
231 const char *work_tree, *git_dir;
232 static int initialized = 0;
234 if (initialized)
235 return;
236 work_tree = get_git_work_tree();
237 git_dir = get_git_dir();
238 if (!is_absolute_path(git_dir))
239 git_dir = make_absolute_path(git_dir);
240 if (!work_tree || chdir(work_tree))
241 die("This operation must be run in a work tree");
242 set_git_dir(make_relative_path(git_dir, work_tree));
243 initialized = 1;
246 static int check_repository_format_gently(int *nongit_ok)
248 git_config(check_repository_format_version, NULL);
249 if (GIT_REPO_VERSION < repository_format_version) {
250 if (!nongit_ok)
251 die ("Expected git repo version <= %d, found %d",
252 GIT_REPO_VERSION, repository_format_version);
253 warning("Expected git repo version <= %d, found %d",
254 GIT_REPO_VERSION, repository_format_version);
255 warning("Please upgrade Git");
256 *nongit_ok = -1;
257 return -1;
259 return 0;
263 * Try to read the location of the git directory from the .git file,
264 * return path to git directory if found.
266 const char *read_gitfile_gently(const char *path)
268 char *buf;
269 char *dir;
270 const char *slash;
271 struct stat st;
272 int fd;
273 size_t len;
275 if (stat(path, &st))
276 return NULL;
277 if (!S_ISREG(st.st_mode))
278 return NULL;
279 fd = open(path, O_RDONLY);
280 if (fd < 0)
281 die_errno("Error opening '%s'", path);
282 buf = xmalloc(st.st_size + 1);
283 len = read_in_full(fd, buf, st.st_size);
284 close(fd);
285 if (len != st.st_size)
286 die("Error reading %s", path);
287 buf[len] = '\0';
288 if (prefixcmp(buf, "gitdir: "))
289 die("Invalid gitfile format: %s", path);
290 while (buf[len - 1] == '\n' || buf[len - 1] == '\r')
291 len--;
292 if (len < 9)
293 die("No path in gitfile: %s", path);
294 buf[len] = '\0';
295 dir = buf + 8;
297 if (!is_absolute_path(dir) && (slash = strrchr(path, '/'))) {
298 size_t pathlen = slash+1 - path;
299 size_t dirlen = pathlen + len - 8;
300 dir = xmalloc(dirlen + 1);
301 strncpy(dir, path, pathlen);
302 strncpy(dir + pathlen, buf + 8, len - 8);
303 dir[dirlen] = '\0';
304 free(buf);
305 buf = dir;
308 if (!is_git_directory(dir))
309 die("Not a git repository: %s", dir);
310 path = make_absolute_path(dir);
312 free(buf);
313 return path;
317 * We cannot decide in this function whether we are in the work tree or
318 * not, since the config can only be read _after_ this function was called.
320 const char *setup_git_directory_gently(int *nongit_ok)
322 const char *work_tree_env = getenv(GIT_WORK_TREE_ENVIRONMENT);
323 const char *env_ceiling_dirs = getenv(CEILING_DIRECTORIES_ENVIRONMENT);
324 static char cwd[PATH_MAX+1];
325 const char *gitdirenv;
326 const char *gitfile_dir;
327 int len, offset, ceil_offset, root_len;
328 dev_t current_device = 0;
329 int one_filesystem = 1;
330 struct stat buf;
333 * Let's assume that we are in a git repository.
334 * If it turns out later that we are somewhere else, the value will be
335 * updated accordingly.
337 if (nongit_ok)
338 *nongit_ok = 0;
341 * If GIT_DIR is set explicitly, we're not going
342 * to do any discovery, but we still do repository
343 * validation.
345 gitdirenv = getenv(GIT_DIR_ENVIRONMENT);
346 if (gitdirenv) {
347 if (PATH_MAX - 40 < strlen(gitdirenv))
348 die("'$%s' too big", GIT_DIR_ENVIRONMENT);
349 if (is_git_directory(gitdirenv)) {
350 static char buffer[1024 + 1];
351 const char *retval;
353 if (!work_tree_env) {
354 retval = set_work_tree(gitdirenv);
355 /* config may override worktree */
356 if (check_repository_format_gently(nongit_ok))
357 return NULL;
358 return retval;
360 if (check_repository_format_gently(nongit_ok))
361 return NULL;
362 retval = get_relative_cwd(buffer, sizeof(buffer) - 1,
363 get_git_work_tree());
364 if (!retval || !*retval)
365 return NULL;
366 set_git_dir(make_absolute_path(gitdirenv));
367 if (chdir(work_tree_env) < 0)
368 die_errno ("Could not chdir to '%s'", work_tree_env);
369 strcat(buffer, "/");
370 return retval;
372 if (nongit_ok) {
373 *nongit_ok = 1;
374 return NULL;
376 die("Not a git repository: '%s'", gitdirenv);
379 if (!getcwd(cwd, sizeof(cwd)-1))
380 die_errno("Unable to read current working directory");
382 ceil_offset = longest_ancestor_length(cwd, env_ceiling_dirs);
383 if (ceil_offset < 0 && has_dos_drive_prefix(cwd))
384 ceil_offset = 1;
387 * Test in the following order (relative to the cwd):
388 * - .git (file containing "gitdir: <path>")
389 * - .git/
390 * - ./ (bare)
391 * - ../.git
392 * - ../.git/
393 * - ../ (bare)
394 * - ../../.git/
395 * etc.
397 offset = len = strlen(cwd);
398 one_filesystem = !git_env_bool("GIT_DISCOVERY_ACROSS_FILESYSTEM", 0);
399 if (one_filesystem) {
400 if (stat(".", &buf))
401 die_errno("failed to stat '.'");
402 current_device = buf.st_dev;
404 for (;;) {
405 gitfile_dir = read_gitfile_gently(DEFAULT_GIT_DIR_ENVIRONMENT);
406 if (gitfile_dir) {
407 if (set_git_dir(gitfile_dir))
408 die("Repository setup failed");
409 break;
411 if (is_git_directory(DEFAULT_GIT_DIR_ENVIRONMENT))
412 break;
413 if (is_git_directory(".")) {
414 inside_git_dir = 1;
415 if (!work_tree_env)
416 inside_work_tree = 0;
417 if (offset != len) {
418 root_len = offset_1st_component(cwd);
419 cwd[offset > root_len ? offset : root_len] = '\0';
420 set_git_dir(cwd);
421 } else
422 set_git_dir(".");
423 check_repository_format_gently(nongit_ok);
424 return NULL;
426 while (--offset > ceil_offset && cwd[offset] != '/');
427 if (offset <= ceil_offset) {
428 if (nongit_ok) {
429 if (chdir(cwd))
430 die_errno("Cannot come back to cwd");
431 *nongit_ok = 1;
432 return NULL;
434 die("Not a git repository (or any of the parent directories): %s", DEFAULT_GIT_DIR_ENVIRONMENT);
436 if (one_filesystem) {
437 if (stat("..", &buf)) {
438 cwd[offset] = '\0';
439 die_errno("failed to stat '%s/..'", cwd);
441 if (buf.st_dev != current_device) {
442 if (nongit_ok) {
443 if (chdir(cwd))
444 die_errno("Cannot come back to cwd");
445 *nongit_ok = 1;
446 return NULL;
448 cwd[offset] = '\0';
449 die("Not a git repository (or any parent up to mount parent %s)\n"
450 "Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).", cwd);
453 if (chdir("..")) {
454 cwd[offset] = '\0';
455 die_errno("Cannot change to '%s/..'", cwd);
459 inside_git_dir = 0;
460 if (!work_tree_env)
461 inside_work_tree = 1;
462 root_len = offset_1st_component(cwd);
463 git_work_tree_cfg = xstrndup(cwd, offset > root_len ? offset : root_len);
464 if (check_repository_format_gently(nongit_ok))
465 return NULL;
466 if (offset == len)
467 return NULL;
469 /* Make "offset" point to past the '/', and add a '/' at the end */
470 offset++;
471 cwd[len++] = '/';
472 cwd[len] = 0;
473 return cwd + offset;
476 int git_config_perm(const char *var, const char *value)
478 int i;
479 char *endptr;
481 if (value == NULL)
482 return PERM_GROUP;
484 if (!strcmp(value, "umask"))
485 return PERM_UMASK;
486 if (!strcmp(value, "group"))
487 return PERM_GROUP;
488 if (!strcmp(value, "all") ||
489 !strcmp(value, "world") ||
490 !strcmp(value, "everybody"))
491 return PERM_EVERYBODY;
493 /* Parse octal numbers */
494 i = strtol(value, &endptr, 8);
496 /* If not an octal number, maybe true/false? */
497 if (*endptr != 0)
498 return git_config_bool(var, value) ? PERM_GROUP : PERM_UMASK;
501 * Treat values 0, 1 and 2 as compatibility cases, otherwise it is
502 * a chmod value to restrict to.
504 switch (i) {
505 case PERM_UMASK: /* 0 */
506 return PERM_UMASK;
507 case OLD_PERM_GROUP: /* 1 */
508 return PERM_GROUP;
509 case OLD_PERM_EVERYBODY: /* 2 */
510 return PERM_EVERYBODY;
513 /* A filemode value was given: 0xxx */
515 if ((i & 0600) != 0600)
516 die("Problem with core.sharedRepository filemode value "
517 "(0%.3o).\nThe owner of files must always have "
518 "read and write permissions.", i);
521 * Mask filemode value. Others can not get write permission.
522 * x flags for directories are handled separately.
524 return -(i & 0666);
527 int check_repository_format_version(const char *var, const char *value, void *cb)
529 if (strcmp(var, "core.repositoryformatversion") == 0)
530 repository_format_version = git_config_int(var, value);
531 else if (strcmp(var, "core.sharedrepository") == 0)
532 shared_repository = git_config_perm(var, value);
533 else if (strcmp(var, "core.bare") == 0) {
534 is_bare_repository_cfg = git_config_bool(var, value);
535 if (is_bare_repository_cfg == 1)
536 inside_work_tree = -1;
537 } else if (strcmp(var, "core.worktree") == 0) {
538 if (!value)
539 return config_error_nonbool(var);
540 free(git_work_tree_cfg);
541 git_work_tree_cfg = xstrdup(value);
542 inside_work_tree = -1;
544 return 0;
547 int check_repository_format(void)
549 return check_repository_format_gently(NULL);
553 * Returns the "prefix", a path to the current working directory
554 * relative to the work tree root, or NULL, if the current working
555 * directory is not a strict subdirectory of the work tree root. The
556 * prefix always ends with a '/' character.
558 const char *setup_git_directory(void)
560 const char *retval = setup_git_directory_gently(NULL);
562 /* If the work tree is not the default one, recompute prefix */
563 if (inside_work_tree < 0) {
564 static char buffer[PATH_MAX + 1];
565 char *rel;
566 if (retval && chdir(retval))
567 die_errno ("Could not jump back into original cwd");
568 rel = get_relative_cwd(buffer, PATH_MAX, get_git_work_tree());
569 if (rel && *rel && chdir(get_git_work_tree()))
570 die_errno ("Could not jump to working directory");
571 return rel && *rel ? strcat(rel, "/") : NULL;
574 return retval;