submodule: Fix t7400, t7405, t7406 for msysGit
[git/dscho.git] / Documentation / git-merge.txt
blobe2e6aba17e7bde2bacb7f29ec4c54e5f9587dac6
1 git-merge(1)
2 ============
4 NAME
5 ----
6 git-merge - Join two or more development histories together
9 SYNOPSIS
10 --------
11 [verse]
12 'git merge' [-n] [--stat] [--no-commit] [--squash]
13         [-s <strategy>] [-X <strategy-option>]
14         [--[no-]rerere-autoupdate] [-m <msg>] [<commit>...]
15 'git merge' <msg> HEAD <commit>...
16 'git merge' --abort
18 DESCRIPTION
19 -----------
20 Incorporates changes from the named commits (since the time their
21 histories diverged from the current branch) into the current
22 branch.  This command is used by 'git pull' to incorporate changes
23 from another repository and can be used by hand to merge changes
24 from one branch into another.
26 Assume the following history exists and the current branch is
27 "`master`":
29 ------------
30           A---B---C topic
31          /
32     D---E---F---G master
33 ------------
35 Then "`git merge topic`" will replay the changes made on the
36 `topic` branch since it diverged from `master` (i.e., `E`) until
37 its current commit (`C`) on top of `master`, and record the result
38 in a new commit along with the names of the two parent commits and
39 a log message from the user describing the changes.
41 ------------
42           A---B---C topic
43          /         \
44     D---E---F---G---H master
45 ------------
47 The second syntax (<msg> `HEAD` <commit>...) is supported for
48 historical reasons.  Do not use it from the command line or in
49 new scripts.  It is the same as `git merge -m <msg> <commit>...`.
51 The third syntax ("`git merge --abort`") can only be run after the
52 merge has resulted in conflicts. 'git merge --abort' will abort the
53 merge process and try to reconstruct the pre-merge state. However,
54 if there were uncommitted changes when the merge started (and
55 especially if those changes were further modified after the merge
56 was started), 'git merge --abort' will in some cases be unable to
57 reconstruct the original (pre-merge) changes. Therefore:
59 *Warning*: Running 'git merge' with uncommitted changes is
60 discouraged: while possible, it leaves you in a state that is hard to
61 back out of in the case of a conflict.
64 OPTIONS
65 -------
66 include::merge-options.txt[]
68 -m <msg>::
69         Set the commit message to be used for the merge commit (in
70         case one is created).
72 If `--log` is specified, a shortlog of the commits being merged
73 will be appended to the specified message.
75 The 'git fmt-merge-msg' command can be
76 used to give a good default for automated 'git merge'
77 invocations.
79 --rerere-autoupdate::
80 --no-rerere-autoupdate::
81         Allow the rerere mechanism to update the index with the
82         result of auto-conflict resolution if possible.
84 --abort::
85         Abort the current conflict resolution process, and
86         try to reconstruct the pre-merge state.
88 If there were uncommitted worktree changes present when the merge
89 started, 'git merge --abort' will in some cases be unable to
90 reconstruct these changes. It is therefore recommended to always
91 commit or stash your changes before running 'git merge'.
93 'git merge --abort' is equivalent to 'git reset --merge' when
94 `MERGE_HEAD` is present.
96 <commit>...::
97         Commits, usually other branch heads, to merge into our branch.
98         Specifying more than one commit will create a merge with
99         more than two parents (affectionately called an Octopus merge).
101 If no commit is given from the command line, and if `merge.defaultToUpstream`
102 configuration variable is set, merge the remote tracking branches
103 that the current branch is configured to use as its upstream.
104 See also the configuration section of this manual page.
107 PRE-MERGE CHECKS
108 ----------------
110 Before applying outside changes, you should get your own work in
111 good shape and committed locally, so it will not be clobbered if
112 there are conflicts.  See also linkgit:git-stash[1].
113 'git pull' and 'git merge' will stop without doing anything when
114 local uncommitted changes overlap with files that 'git pull'/'git
115 merge' may need to update.
117 To avoid recording unrelated changes in the merge commit,
118 'git pull' and 'git merge' will also abort if there are any changes
119 registered in the index relative to the `HEAD` commit.  (One
120 exception is when the changed index entries are in the state that
121 would result from the merge already.)
123 If all named commits are already ancestors of `HEAD`, 'git merge'
124 will exit early with the message "Already up-to-date."
126 FAST-FORWARD MERGE
127 ------------------
129 Often the current branch head is an ancestor of the named commit.
130 This is the most common case especially when invoked from 'git
131 pull': you are tracking an upstream repository, you have committed
132 no local changes, and now you want to update to a newer upstream
133 revision.  In this case, a new commit is not needed to store the
134 combined history; instead, the `HEAD` (along with the index) is
135 updated to point at the named commit, without creating an extra
136 merge commit.
138 This behavior can be suppressed with the `--no-ff` option.
140 TRUE MERGE
141 ----------
143 Except in a fast-forward merge (see above), the branches to be
144 merged must be tied together by a merge commit that has both of them
145 as its parents.
147 A merged version reconciling the changes from all branches to be
148 merged is committed, and your `HEAD`, index, and working tree are
149 updated to it.  It is possible to have modifications in the working
150 tree as long as they do not overlap; the update will preserve them.
152 When it is not obvious how to reconcile the changes, the following
153 happens:
155 1. The `HEAD` pointer stays the same.
156 2. The `MERGE_HEAD` ref is set to point to the other branch head.
157 3. Paths that merged cleanly are updated both in the index file and
158    in your working tree.
159 4. For conflicting paths, the index file records up to three
160    versions: stage 1 stores the version from the common ancestor,
161    stage 2 from `HEAD`, and stage 3 from `MERGE_HEAD` (you
162    can inspect the stages with `git ls-files -u`).  The working
163    tree files contain the result of the "merge" program; i.e. 3-way
164    merge results with familiar conflict markers `<<<` `===` `>>>`.
165 5. No other changes are made.  In particular, the local
166    modifications you had before you started merge will stay the
167    same and the index entries for them stay as they were,
168    i.e. matching `HEAD`.
170 If you tried a merge which resulted in complex conflicts and
171 want to start over, you can recover with `git merge --abort`.
173 HOW CONFLICTS ARE PRESENTED
174 ---------------------------
176 During a merge, the working tree files are updated to reflect the result
177 of the merge.  Among the changes made to the common ancestor's version,
178 non-overlapping ones (that is, you changed an area of the file while the
179 other side left that area intact, or vice versa) are incorporated in the
180 final result verbatim.  When both sides made changes to the same area,
181 however, git cannot randomly pick one side over the other, and asks you to
182 resolve it by leaving what both sides did to that area.
184 By default, git uses the same style as that is used by "merge" program
185 from the RCS suite to present such a conflicted hunk, like this:
187 ------------
188 Here are lines that are either unchanged from the common
189 ancestor, or cleanly resolved because only one side changed.
190 <<<<<<< yours:sample.txt
191 Conflict resolution is hard;
192 let's go shopping.
193 =======
194 Git makes conflict resolution easy.
195 >>>>>>> theirs:sample.txt
196 And here is another line that is cleanly resolved or unmodified.
197 ------------
199 The area where a pair of conflicting changes happened is marked with markers
200 `<<<<<<<`, `=======`, and `>>>>>>>`.  The part before the `=======`
201 is typically your side, and the part afterwards is typically their side.
203 The default format does not show what the original said in the conflicting
204 area.  You cannot tell how many lines are deleted and replaced with
205 Barbie's remark on your side.  The only thing you can tell is that your
206 side wants to say it is hard and you'd prefer to go shopping, while the
207 other side wants to claim it is easy.
209 An alternative style can be used by setting the "merge.conflictstyle"
210 configuration variable to "diff3".  In "diff3" style, the above conflict
211 may look like this:
213 ------------
214 Here are lines that are either unchanged from the common
215 ancestor, or cleanly resolved because only one side changed.
216 <<<<<<< yours:sample.txt
217 Conflict resolution is hard;
218 let's go shopping.
219 |||||||
220 Conflict resolution is hard.
221 =======
222 Git makes conflict resolution easy.
223 >>>>>>> theirs:sample.txt
224 And here is another line that is cleanly resolved or unmodified.
225 ------------
227 In addition to the `<<<<<<<`, `=======`, and `>>>>>>>` markers, it uses
228 another `|||||||` marker that is followed by the original text.  You can
229 tell that the original just stated a fact, and your side simply gave in to
230 that statement and gave up, while the other side tried to have a more
231 positive attitude.  You can sometimes come up with a better resolution by
232 viewing the original.
235 HOW TO RESOLVE CONFLICTS
236 ------------------------
238 After seeing a conflict, you can do two things:
240  * Decide not to merge.  The only clean-ups you need are to reset
241    the index file to the `HEAD` commit to reverse 2. and to clean
242    up working tree changes made by 2. and 3.; `git merge --abort`
243    can be used for this.
245  * Resolve the conflicts.  Git will mark the conflicts in
246    the working tree.  Edit the files into shape and
247    'git add' them to the index.  Use 'git commit' to seal the deal.
249 You can work through the conflict with a number of tools:
251  * Use a mergetool.  `git mergetool` to launch a graphical
252    mergetool which will work you through the merge.
254  * Look at the diffs.  `git diff` will show a three-way diff,
255    highlighting changes from both the `HEAD` and `MERGE_HEAD`
256    versions.
258  * Look at the diffs from each branch. `git log --merge -p <path>`
259    will show diffs first for the `HEAD` version and then the
260    `MERGE_HEAD` version.
262  * Look at the originals.  `git show :1:filename` shows the
263    common ancestor, `git show :2:filename` shows the `HEAD`
264    version, and `git show :3:filename` shows the `MERGE_HEAD`
265    version.
268 EXAMPLES
269 --------
271 * Merge branches `fixes` and `enhancements` on top of
272   the current branch, making an octopus merge:
274 ------------------------------------------------
275 $ git merge fixes enhancements
276 ------------------------------------------------
278 * Merge branch `obsolete` into the current branch, using `ours`
279   merge strategy:
281 ------------------------------------------------
282 $ git merge -s ours obsolete
283 ------------------------------------------------
285 * Merge branch `maint` into the current branch, but do not make
286   a new commit automatically:
288 ------------------------------------------------
289 $ git merge --no-commit maint
290 ------------------------------------------------
292 This can be used when you want to include further changes to the
293 merge, or want to write your own merge commit message.
295 You should refrain from abusing this option to sneak substantial
296 changes into a merge commit.  Small fixups like bumping
297 release/version name would be acceptable.
300 include::merge-strategies.txt[]
302 CONFIGURATION
303 -------------
304 include::merge-config.txt[]
306 branch.<name>.mergeoptions::
307         Sets default options for merging into branch <name>. The syntax and
308         supported options are the same as those of 'git merge', but option
309         values containing whitespace characters are currently not supported.
311 SEE ALSO
312 --------
313 linkgit:git-fmt-merge-msg[1], linkgit:git-pull[1],
314 linkgit:gitattributes[5],
315 linkgit:git-reset[1],
316 linkgit:git-diff[1], linkgit:git-ls-files[1],
317 linkgit:git-add[1], linkgit:git-rm[1],
318 linkgit:git-mergetool[1]
322 Part of the linkgit:git[1] suite