From b18943845c71bf4792436c541e342361e2483249 Mon Sep 17 00:00:00 2001
From: Jiang Xin <worldhello.net@gmail.com>
Date: Tue, 6 Aug 2013 14:49:18 +0800
Subject: [PATCH] l10n: zh_CN.po: translate 5 messages (2135t0f0u)

Translate 5 new messages came from git.pot update in b8ecf23
(l10n: git.pot: v1.8.4 round 2 (5 new, 3 removed)).

Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
---
 po/zh_CN.po | 346 ++++++++++++++++++++++++++++++++----------------------------
 1 file changed, 182 insertions(+), 164 deletions(-)

diff --git a/po/zh_CN.po b/po/zh_CN.po
index ff95140612..b7b46f14f0 100644
--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -12,8 +12,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Git\n"
 "Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2013-07-26 14:19+0800\n"
-"PO-Revision-Date: 2013-08-03 14:13+0800\n"
+"POT-Creation-Date: 2013-08-06 14:10+0800\n"
+"PO-Revision-Date: 2013-08-06 14:45+0800\n"
 "Last-Translator: Jiang Xin <worldhello.net@gmail.com>\n"
 "Language-Team: GitHub <https://github.com/gotgit/git/>\n"
 "Language: zh_CN\n"
@@ -266,7 +266,7 @@ msgstr "'%s' 不像是一个 v2 版本的包文件"
 msgid "unrecognized header: %s%s (%d)"
 msgstr "未能识别的包头：%s%s (%d)"
 
-#: bundle.c:89 builtin/commit.c:683
+#: bundle.c:89 builtin/commit.c:697
 #, c-format
 msgid "could not open '%s'"
 msgstr "不能打开 '%s'"
@@ -506,20 +506,20 @@ msgstr "'%s'：%s"
 msgid "'%s': short read %s"
 msgstr "'%s'：读取不完整 %s"
 
-#: help.c:213
+#: help.c:210
 #, c-format
 msgid "available git commands in '%s'"
 msgstr "在 '%s' 下可用的 git 命令"
 
-#: help.c:220
+#: help.c:217
 msgid "git commands available from elsewhere on your $PATH"
 msgstr "在 $PATH 路径中的其他地方可用的 git 命令"
 
-#: help.c:236
+#: help.c:233
 msgid "The most commonly used git commands are:"
 msgstr "最常用的 git 命令有："
 
-#: help.c:293
+#: help.c:290
 #, c-format
 msgid ""
 "'%s' appears to be a git command, but we were not\n"
@@ -528,11 +528,11 @@ msgstr ""
 "'%s' 像是一个 git 命令，但却无法运行。\n"
 "可能是 git-%s 受损？"
 
-#: help.c:350
+#: help.c:347
 msgid "Uh oh. Your system reports no Git commands at all."
 msgstr "唉呀，您的系统中未发现 Git 命令。"
 
-#: help.c:372
+#: help.c:369
 #, c-format
 msgid ""
 "WARNING: You called a Git command named '%s', which does not exist.\n"
@@ -541,17 +541,17 @@ msgstr ""
 "警告：您运行一个不存在的 Git 命令 '%s'。继续执行假定您要要运行的\n"
 "是 '%s'"
 
-#: help.c:377
+#: help.c:374
 #, c-format
 msgid "in %0.1f seconds automatically..."
 msgstr "在 %0.1f 秒钟后自动运行..."
 
-#: help.c:384
+#: help.c:381
 #, c-format
 msgid "git: '%s' is not a git command. See 'git --help'."
 msgstr "git：'%s' 不是一个 git 命令。参见 'git --help'。"
 
-#: help.c:388 help.c:447
+#: help.c:385 help.c:444
 msgid ""
 "\n"
 "Did you mean this?"
@@ -565,7 +565,7 @@ msgstr[1] ""
 "\n"
 "您指的是这其中的某一个么？"
 
-#: help.c:443
+#: help.c:440
 #, c-format
 msgid "%s: %s - %s"
 msgstr "%s：%s - %s"
@@ -1204,7 +1204,7 @@ msgid ""
 "\n"
 "where \"$br\" is somehow empty and a 40-hex ref is created. Please\n"
 "examine these refs and maybe delete them. Turn this message off by\n"
-"running \"git config advice.object_name_warning false\""
+"running \"git config advice.objectNameWarning false\""
 msgstr ""
 "Git 通常不会创建一个以40位十六进制字符命名的引用，因为当你提供40位\n"
 "十六进制字符时将被忽略。不过这些引用也可能被错误地创建。例如：\n"
@@ -1212,7 +1212,7 @@ msgstr ""
 "  git checkout -b $br $(git rev-parse ...)\n"
 "\n"
 "当 \"$br\" 空白时一个40位十六进制的引用将被创建。请检查这些引用，\n"
-"可能需要删除它们。用 \"git config advice.object_name_warning false\""
+"可能需要删除它们。用 \"git config advice.objectNameWarning false\"\n"
 "命令关闭本消息通知。"
 
 #: sha1_name.c:1097
@@ -1786,7 +1786,7 @@ msgstr ""
 msgid "unexpected diff status %c"
 msgstr "意外的差异状态 %c"
 
-#: builtin/add.c:149 builtin/commit.c:238
+#: builtin/add.c:149 builtin/commit.c:252
 msgid "updating files failed"
 msgstr "更新文件失败"
 
@@ -1835,14 +1835,14 @@ msgstr "不能应用 '%s'"
 msgid "The following paths are ignored by one of your .gitignore files:\n"
 msgstr "下列路径根据您的一个 .gitignore 文件而被忽略：\n"
 
-#: builtin/add.c:394 builtin/clean.c:851 builtin/fetch.c:78 builtin/mv.c:63
+#: builtin/add.c:394 builtin/clean.c:875 builtin/fetch.c:78 builtin/mv.c:63
 #: builtin/prune-packed.c:73 builtin/push.c:451 builtin/remote.c:1253
 #: builtin/rm.c:268
 msgid "dry run"
 msgstr "演习"
 
 #: builtin/add.c:395 builtin/apply.c:4410 builtin/check-ignore.c:19
-#: builtin/commit.c:1201 builtin/count-objects.c:95 builtin/fsck.c:613
+#: builtin/commit.c:1220 builtin/count-objects.c:95 builtin/fsck.c:613
 #: builtin/log.c:1573 builtin/mv.c:62 builtin/read-tree.c:113
 msgid "be verbose"
 msgstr "冗长输出"
@@ -1923,8 +1923,8 @@ msgstr "没有指定文件，也没有文件被添加。\n"
 msgid "Maybe you wanted to say 'git add .'?\n"
 msgstr "也许您想要执行 'git add .'？\n"
 
-#: builtin/add.c:533 builtin/check-ignore.c:161 builtin/clean.c:895
-#: builtin/commit.c:298 builtin/mv.c:82 builtin/rm.c:297
+#: builtin/add.c:533 builtin/check-ignore.c:161 builtin/clean.c:919
+#: builtin/commit.c:312 builtin/mv.c:82 builtin/rm.c:297
 msgid "index file corrupt"
 msgstr "索引文件损坏"
 
@@ -2777,8 +2777,8 @@ msgid "act on remote-tracking branches"
 msgstr "作用于远程跟踪分支"
 
 #: builtin/branch.c:805 builtin/branch.c:811 builtin/branch.c:832
-#: builtin/branch.c:838 builtin/commit.c:1414 builtin/commit.c:1415
-#: builtin/commit.c:1416 builtin/commit.c:1417 builtin/tag.c:468
+#: builtin/branch.c:838 builtin/commit.c:1433 builtin/commit.c:1434
+#: builtin/commit.c:1435 builtin/commit.c:1436 builtin/tag.c:468
 msgid "commit"
 msgstr "提交"
 
@@ -2959,43 +2959,43 @@ msgstr "需要一个版本库来创建包。"
 msgid "Need a repository to unbundle."
 msgstr "需要一个版本库来解包。"
 
-#: builtin/cat-file.c:303
+#: builtin/cat-file.c:285
 msgid "git cat-file (-t|-s|-e|-p|<type>|--textconv) <object>"
 msgstr "git cat-file (-t|-s|-e|-p|<类型>|--textconv) <对象>"
 
-#: builtin/cat-file.c:304
+#: builtin/cat-file.c:286
 msgid "git cat-file (--batch|--batch-check) < <list_of_objects>"
 msgstr "git cat-file (--batch|--batch-check) < <对象列表>"
 
-#: builtin/cat-file.c:341
+#: builtin/cat-file.c:323
 msgid "<type> can be one of: blob, tree, commit, tag"
 msgstr "<类型> 可以是其中之一：blob、tree、commit、tag"
 
-#: builtin/cat-file.c:342
+#: builtin/cat-file.c:324
 msgid "show object type"
 msgstr "显示对象类型"
 
-#: builtin/cat-file.c:343
+#: builtin/cat-file.c:325
 msgid "show object size"
 msgstr "显示对象大小"
 
-#: builtin/cat-file.c:345
+#: builtin/cat-file.c:327
 msgid "exit with zero when there's no error"
 msgstr "当没有错误时退出并返回零"
 
-#: builtin/cat-file.c:346
+#: builtin/cat-file.c:328
 msgid "pretty-print object's content"
 msgstr "美观地打印对象的内容"
 
-#: builtin/cat-file.c:348
+#: builtin/cat-file.c:330
 msgid "for blob objects, run textconv on object's content"
 msgstr "对于数据（blob）对象，对其内容执行 textconv"
 
-#: builtin/cat-file.c:350
+#: builtin/cat-file.c:332
 msgid "show info and content of objects fed from the standard input"
 msgstr "显示从标准输入提供的对象的信息和内容"
 
-#: builtin/cat-file.c:353
+#: builtin/cat-file.c:335
 msgid "show info about objects fed from the standard input"
 msgstr "显示从标准输入提供的对象的信息"
 
@@ -3473,35 +3473,35 @@ msgstr ""
 "*          - 选择所有选项\n"
 "           - （空）结束选择"
 
-#: builtin/clean.c:491
+#: builtin/clean.c:515
 #, c-format
 msgid "Huh (%s)?"
 msgstr "嗯（%s）？"
 
-#: builtin/clean.c:634
+#: builtin/clean.c:658
 #, c-format
 msgid "Input ignore patterns>> "
 msgstr "输入模版以排除条目>> "
 
-#: builtin/clean.c:671
+#: builtin/clean.c:695
 #, c-format
 msgid "WARNING: Cannot find items matched by: %s"
 msgstr "警告：无法找到和 %s 匹配的条目"
 
-#: builtin/clean.c:692
+#: builtin/clean.c:716
 msgid "Select items to delete"
 msgstr "选择要删除的条目"
 
-#: builtin/clean.c:732
+#: builtin/clean.c:756
 #, c-format
 msgid "remove %s? "
 msgstr "删除 %s？"
 
-#: builtin/clean.c:757
+#: builtin/clean.c:781
 msgid "Bye."
 msgstr "再见。"
 
-#: builtin/clean.c:765
+#: builtin/clean.c:789
 msgid ""
 "clean               - start cleaning\n"
 "filter by pattern   - exclude items from deletion\n"
@@ -3519,69 +3519,69 @@ msgstr ""
 "help                - 显示本帮助\n"
 "?                   - 显示如何在提示符下选择的帮助"
 
-#: builtin/clean.c:792
+#: builtin/clean.c:816
 msgid "*** Commands ***"
 msgstr "*** 命令 ***"
 
-#: builtin/clean.c:793
+#: builtin/clean.c:817
 msgid "What now"
 msgstr "请选择"
 
-#: builtin/clean.c:801
+#: builtin/clean.c:825
 msgid "Would remove the following item:"
 msgid_plural "Would remove the following items:"
 msgstr[0] "将删除如下条目："
 msgstr[1] "将删除如下条目："
 
-#: builtin/clean.c:818
+#: builtin/clean.c:842
 msgid "No more files to clean, exiting."
 msgstr "没有要清理的文件，退出。"
 
-#: builtin/clean.c:850
+#: builtin/clean.c:874
 msgid "do not print names of files removed"
 msgstr "不打印删除文件的名称"
 
-#: builtin/clean.c:852
+#: builtin/clean.c:876
 msgid "force"
 msgstr "强制"
 
-#: builtin/clean.c:853
+#: builtin/clean.c:877
 msgid "interactive cleaning"
 msgstr "交互式清除"
 
-#: builtin/clean.c:855
+#: builtin/clean.c:879
 msgid "remove whole directories"
 msgstr "删除整个目录"
 
-#: builtin/clean.c:856 builtin/describe.c:420 builtin/grep.c:716
+#: builtin/clean.c:880 builtin/describe.c:420 builtin/grep.c:716
 #: builtin/ls-files.c:493 builtin/name-rev.c:315 builtin/show-ref.c:186
 msgid "pattern"
 msgstr "模式"
 
-#: builtin/clean.c:857
+#: builtin/clean.c:881
 msgid "add <pattern> to ignore rules"
 msgstr "添加<模式>到忽略规则"
 
-#: builtin/clean.c:858
+#: builtin/clean.c:882
 msgid "remove ignored files, too"
 msgstr "也删除忽略的文件"
 
-#: builtin/clean.c:860
+#: builtin/clean.c:884
 msgid "remove only ignored files"
 msgstr "只删除忽略的文件"
 
-#: builtin/clean.c:878
+#: builtin/clean.c:902
 msgid "-x and -X cannot be used together"
 msgstr "-x 和 -X 不能同时使用"
 
-#: builtin/clean.c:882
+#: builtin/clean.c:906
 msgid ""
 "clean.requireForce set to true and neither -i, -n nor -f given; refusing to "
 "clean"
 msgstr ""
 "clean.requireForce 设置为 true 且未提供 -i、-n 或 -f 选项，拒绝执行清理动作"
 
-#: builtin/clean.c:885
+#: builtin/clean.c:909
 msgid ""
 "clean.requireForce defaults to true and neither -i, -n nor -f given; "
 "refusing to clean"
@@ -3911,102 +3911,120 @@ msgid ""
 "\n"
 "    git commit --allow-empty\n"
 "\n"
-"Otherwise, please use 'git reset'\n"
 msgstr ""
 "之前的拣选操作现在是一个空提交，可能是由冲突解决导致的。如果您无论如何\n"
 "也要提交，使用命令：\n"
 "\n"
 "    git commit --allow-empty\n"
 "\n"
-"否则，请使用命令 'git reset'\n"
 
-#: builtin/commit.c:265
+#: builtin/commit.c:69
+msgid "Otherwise, please use 'git reset'\n"
+msgstr "否则，请使用命令 'git reset'\n"
+
+#: builtin/commit.c:72
+msgid ""
+"If you wish to skip this commit, use:\n"
+"\n"
+"    git reset\n"
+"\n"
+"Then \"git cherry-pick --continue\" will resume cherry-picking\n"
+"the remaining commits.\n"
+msgstr ""
+"如果您想跳过这个提交，使用命令：\n"
+"\n"
+"    git reset\n"
+"\n"
+"然后执行 \"git cherry-pick --continue\" 继续对其余提交执行拣选\n"
+"操作。\n"
+
+#: builtin/commit.c:279
 msgid "failed to unpack HEAD tree object"
 msgstr "无法解包 HEAD 树对象"
 
-#: builtin/commit.c:307
+#: builtin/commit.c:321
 msgid "unable to create temporary index"
 msgstr "不能创建临时索引"
 
-#: builtin/commit.c:313
+#: builtin/commit.c:327
 msgid "interactive add failed"
 msgstr "交互式添加失败"
 
-#: builtin/commit.c:346 builtin/commit.c:367 builtin/commit.c:417
+#: builtin/commit.c:360 builtin/commit.c:381 builtin/commit.c:431
 msgid "unable to write new_index file"
 msgstr "无法写 new_index 文件"
 
-#: builtin/commit.c:398
+#: builtin/commit.c:412
 msgid "cannot do a partial commit during a merge."
 msgstr "在合并过程中不能做部分提交。"
 
-#: builtin/commit.c:400
+#: builtin/commit.c:414
 msgid "cannot do a partial commit during a cherry-pick."
 msgstr "在拣选过程中不能做部分提交。"
 
-#: builtin/commit.c:410
+#: builtin/commit.c:424
 msgid "cannot read the index"
 msgstr "无法读取索引"
 
-#: builtin/commit.c:430
+#: builtin/commit.c:444
 msgid "unable to write temporary index file"
 msgstr "无法写临时索引文件"
 
-#: builtin/commit.c:521 builtin/commit.c:527
+#: builtin/commit.c:535 builtin/commit.c:541
 #, c-format
 msgid "invalid commit: %s"
 msgstr "无效的提交：%s"
 
-#: builtin/commit.c:549
+#: builtin/commit.c:563
 msgid "malformed --author parameter"
 msgstr "非法的 --author 参数"
 
-#: builtin/commit.c:569
+#: builtin/commit.c:583
 #, c-format
 msgid "Malformed ident string: '%s'"
 msgstr "非法的身份字符串：'%s'"
 
-#: builtin/commit.c:607 builtin/commit.c:640 builtin/commit.c:963
+#: builtin/commit.c:621 builtin/commit.c:654 builtin/commit.c:982
 #, c-format
 msgid "could not lookup commit %s"
 msgstr "不能查询提交 %s"
 
-#: builtin/commit.c:619 builtin/shortlog.c:271
+#: builtin/commit.c:633 builtin/shortlog.c:271
 #, c-format
 msgid "(reading log message from standard input)\n"
 msgstr "（正从标准输入中读取日志信息）\n"
 
-#: builtin/commit.c:621
+#: builtin/commit.c:635
 msgid "could not read log from standard input"
 msgstr "不能从标准输入中读取日志信息"
 
-#: builtin/commit.c:625
+#: builtin/commit.c:639
 #, c-format
 msgid "could not read log file '%s'"
 msgstr "不能读取日志文件 '%s'"
 
-#: builtin/commit.c:631
+#: builtin/commit.c:645
 msgid "commit has empty message"
 msgstr "提交说明为空"
 
-#: builtin/commit.c:647
+#: builtin/commit.c:661
 msgid "could not read MERGE_MSG"
 msgstr "不能读取 MERGE_MSG"
 
-#: builtin/commit.c:651
+#: builtin/commit.c:665
 msgid "could not read SQUASH_MSG"
 msgstr "不能读取 SQUASH_MSG"
 
-#: builtin/commit.c:655
+#: builtin/commit.c:669
 #, c-format
 msgid "could not read '%s'"
 msgstr "不能读取 '%s'"
 
-#: builtin/commit.c:716
+#: builtin/commit.c:730
 msgid "could not write commit template"
 msgstr "不能写提交模版"
 
-#: builtin/commit.c:727
+#: builtin/commit.c:741
 #, c-format
 msgid ""
 "\n"
@@ -4020,7 +4038,7 @@ msgstr ""
 "\t%s\n"
 "然后重试。\n"
 
-#: builtin/commit.c:732
+#: builtin/commit.c:746
 #, c-format
 msgid ""
 "\n"
@@ -4034,7 +4052,7 @@ msgstr ""
 "\t%s\n"
 "然后重试。\n"
 
-#: builtin/commit.c:744
+#: builtin/commit.c:758
 #, c-format
 msgid ""
 "Please enter the commit message for your changes. Lines starting\n"
@@ -4043,7 +4061,7 @@ msgstr ""
 "请为您的变更输入提交说明。以 '%c' 开始的行将被忽略，而一个空的提交\n"
 "说明将会终止提交。\n"
 
-#: builtin/commit.c:749
+#: builtin/commit.c:763
 #, c-format
 msgid ""
 "Please enter the commit message for your changes. Lines starting\n"
@@ -4054,355 +4072,355 @@ msgstr ""
 "也可以删除它们。一个空的提交说明将会终止提交。\n"
 
 #  译者：为保证在输出中对齐，注意调整句中空格！
-#: builtin/commit.c:762
+#: builtin/commit.c:776
 #, c-format
 msgid "%sAuthor:    %s"
 msgstr "%s作者：     %s"
 
 #  译者：为保证在输出中对齐，注意调整句中空格！
-#: builtin/commit.c:769
+#: builtin/commit.c:783
 #, c-format
 msgid "%sCommitter: %s"
 msgstr "%s提交者：   %s"
 
-#: builtin/commit.c:789
+#: builtin/commit.c:803
 msgid "Cannot read index"
 msgstr "无法读取索引"
 
-#: builtin/commit.c:826
+#: builtin/commit.c:845
 msgid "Error building trees"
 msgstr "无法创建树对象"
 
-#: builtin/commit.c:841 builtin/tag.c:359
+#: builtin/commit.c:860 builtin/tag.c:359
 #, c-format
 msgid "Please supply the message using either -m or -F option.\n"
 msgstr "请使用 -m 或 -F 选项提供提交说明。\n"
 
-#: builtin/commit.c:938
+#: builtin/commit.c:957
 #, c-format
 msgid "No existing author found with '%s'"
 msgstr "没有找到匹配 '%s' 的作者"
 
-#: builtin/commit.c:953 builtin/commit.c:1189
+#: builtin/commit.c:972 builtin/commit.c:1208
 #, c-format
 msgid "Invalid untracked files mode '%s'"
 msgstr "无效的未追踪文件参数 '%s'"
 
-#: builtin/commit.c:990
+#: builtin/commit.c:1009
 msgid "--long and -z are incompatible"
 msgstr "--long 和 -z 选项不兼容"
 
-#: builtin/commit.c:1020
+#: builtin/commit.c:1039
 msgid "Using both --reset-author and --author does not make sense"
 msgstr "同时使用 --reset-author 和 --author 没有意义"
 
-#: builtin/commit.c:1031
+#: builtin/commit.c:1050
 msgid "You have nothing to amend."
 msgstr "您没有可修补的提交。"
 
-#: builtin/commit.c:1034
+#: builtin/commit.c:1053
 msgid "You are in the middle of a merge -- cannot amend."
 msgstr "您正处于一个合并过程中 -- 无法修补提交。"
 
-#: builtin/commit.c:1036
+#: builtin/commit.c:1055
 msgid "You are in the middle of a cherry-pick -- cannot amend."
 msgstr "您正处于一个拣选过程中 -- 无法修补提交。"
 
-#: builtin/commit.c:1039
+#: builtin/commit.c:1058
 msgid "Options --squash and --fixup cannot be used together"
 msgstr "选项 --squash 和 --fixup 不能同时使用"
 
-#: builtin/commit.c:1049
+#: builtin/commit.c:1068
 msgid "Only one of -c/-C/-F/--fixup can be used."
 msgstr "只能用一个 -c/-C/-F/--fixup 选项。"
 
-#: builtin/commit.c:1051
+#: builtin/commit.c:1070
 msgid "Option -m cannot be combined with -c/-C/-F/--fixup."
 msgstr "选项 -m 不能和 -c/-C/-F/--fixup 同时使用。"
 
-#: builtin/commit.c:1059
+#: builtin/commit.c:1078
 msgid "--reset-author can be used only with -C, -c or --amend."
 msgstr "--reset-author 只能和 -C、-c 或 --amend 同时使用。"
 
-#: builtin/commit.c:1076
+#: builtin/commit.c:1095
 msgid "Only one of --include/--only/--all/--interactive/--patch can be used."
 msgstr "只能用一个 --include/--only/--all/--interactive/--patch 选项。"
 
-#: builtin/commit.c:1078
+#: builtin/commit.c:1097
 msgid "No paths with --include/--only does not make sense."
 msgstr "参数 --include/--only 不跟路径没有意义。"
 
-#: builtin/commit.c:1080
+#: builtin/commit.c:1099
 msgid "Clever... amending the last one with dirty index."
 msgstr "聪明... 在索引不干净下修补最后的提交。"
 
-#: builtin/commit.c:1082
+#: builtin/commit.c:1101
 msgid "Explicit paths specified without -i nor -o; assuming --only paths..."
 msgstr "指定了明确的路径而没有使用 -i 或 -o 选项；认为是 --only paths..."
 
-#: builtin/commit.c:1092 builtin/tag.c:575
+#: builtin/commit.c:1111 builtin/tag.c:575
 #, c-format
 msgid "Invalid cleanup mode %s"
 msgstr "无效的清理模式 %s"
 
-#: builtin/commit.c:1097
+#: builtin/commit.c:1116
 msgid "Paths with -a does not make sense."
 msgstr "路径和 -a 选项同时使用没有意义。"
 
-#: builtin/commit.c:1203 builtin/commit.c:1436
+#: builtin/commit.c:1222 builtin/commit.c:1455
 msgid "show status concisely"
 msgstr "以简洁的格式显示状态"
 
-#: builtin/commit.c:1205 builtin/commit.c:1438
+#: builtin/commit.c:1224 builtin/commit.c:1457
 msgid "show branch information"
 msgstr "显示分支信息"
 
-#: builtin/commit.c:1207 builtin/commit.c:1440 builtin/push.c:452
+#: builtin/commit.c:1226 builtin/commit.c:1459 builtin/push.c:452
 msgid "machine-readable output"
 msgstr "机器可读的输出"
 
-#: builtin/commit.c:1210 builtin/commit.c:1442
+#: builtin/commit.c:1229 builtin/commit.c:1461
 msgid "show status in long format (default)"
 msgstr "以长格式显示状态（默认）"
 
-#: builtin/commit.c:1213 builtin/commit.c:1445
+#: builtin/commit.c:1232 builtin/commit.c:1464
 msgid "terminate entries with NUL"
 msgstr "条目以NUL字符结尾"
 
-#: builtin/commit.c:1215 builtin/commit.c:1448 builtin/fast-export.c:667
+#: builtin/commit.c:1234 builtin/commit.c:1467 builtin/fast-export.c:667
 #: builtin/fast-export.c:670 builtin/tag.c:459
 msgid "mode"
 msgstr "模式"
 
-#: builtin/commit.c:1216 builtin/commit.c:1448
+#: builtin/commit.c:1235 builtin/commit.c:1467
 msgid "show untracked files, optional modes: all, normal, no. (Default: all)"
 msgstr "显示未跟踪的文件，“模式”的可选参数：all、normal、no。（默认：all）"
 
-#: builtin/commit.c:1219
+#: builtin/commit.c:1238
 msgid "show ignored files"
 msgstr "显示忽略的文件"
 
-#: builtin/commit.c:1220 parse-options.h:154
+#: builtin/commit.c:1239 parse-options.h:154
 msgid "when"
 msgstr "何时"
 
-#: builtin/commit.c:1221
+#: builtin/commit.c:1240
 msgid ""
 "ignore changes to submodules, optional when: all, dirty, untracked. "
 "(Default: all)"
 msgstr ""
 "忽略子模组的更改，“何时”的可选参数：all、dirty、untracked。（默认：all）"
 
-#: builtin/commit.c:1223
+#: builtin/commit.c:1242
 msgid "list untracked files in columns"
 msgstr "以列的方式显示未跟踪的文件"
 
-#: builtin/commit.c:1294
+#: builtin/commit.c:1313
 msgid "couldn't look up newly created commit"
 msgstr "无法找到新创建的提交"
 
-#: builtin/commit.c:1296
+#: builtin/commit.c:1315
 msgid "could not parse newly created commit"
 msgstr "不能解析新创建的提交"
 
-#: builtin/commit.c:1337
+#: builtin/commit.c:1356
 msgid "detached HEAD"
 msgstr "分离头指针"
 
 #  译者：中文字符串拼接，可删除前导空格
-#: builtin/commit.c:1339
+#: builtin/commit.c:1358
 msgid " (root-commit)"
 msgstr "（根提交）"
 
-#: builtin/commit.c:1406
+#: builtin/commit.c:1425
 msgid "suppress summary after successful commit"
 msgstr "提交成功后不显示概述信息"
 
-#: builtin/commit.c:1407
+#: builtin/commit.c:1426
 msgid "show diff in commit message template"
 msgstr "在提交说明模板里显示差异"
 
-#: builtin/commit.c:1409
+#: builtin/commit.c:1428
 msgid "Commit message options"
 msgstr "提交说明选项"
 
-#: builtin/commit.c:1410 builtin/tag.c:457
+#: builtin/commit.c:1429 builtin/tag.c:457
 msgid "read message from file"
 msgstr "从文件中读取提交说明"
 
-#: builtin/commit.c:1411
+#: builtin/commit.c:1430
 msgid "author"
 msgstr "作者"
 
-#: builtin/commit.c:1411
+#: builtin/commit.c:1430
 msgid "override author for commit"
 msgstr "提交时覆盖作者"
 
-#: builtin/commit.c:1412 builtin/gc.c:178
+#: builtin/commit.c:1431 builtin/gc.c:178
 msgid "date"
 msgstr "日期"
 
-#: builtin/commit.c:1412
+#: builtin/commit.c:1431
 msgid "override date for commit"
 msgstr "提交时覆盖日期"
 
-#: builtin/commit.c:1413 builtin/merge.c:223 builtin/notes.c:405
+#: builtin/commit.c:1432 builtin/merge.c:223 builtin/notes.c:405
 #: builtin/notes.c:562 builtin/tag.c:455
 msgid "message"
 msgstr "说明"
 
-#: builtin/commit.c:1413
+#: builtin/commit.c:1432
 msgid "commit message"
 msgstr "提交说明"
 
-#: builtin/commit.c:1414
+#: builtin/commit.c:1433
 msgid "reuse and edit message from specified commit"
 msgstr "重用并编辑指定提交的提交说明"
 
-#: builtin/commit.c:1415
+#: builtin/commit.c:1434
 msgid "reuse message from specified commit"
 msgstr "重用指定提交的提交说明"
 
-#: builtin/commit.c:1416
+#: builtin/commit.c:1435
 msgid "use autosquash formatted message to fixup specified commit"
 msgstr "使用 autosquash 格式的提交说明用以修正指定的提交"
 
-#: builtin/commit.c:1417
+#: builtin/commit.c:1436
 msgid "use autosquash formatted message to squash specified commit"
 msgstr "使用 autosquash 格式的提交说明用以压缩至指定的提交"
 
-#: builtin/commit.c:1418
+#: builtin/commit.c:1437
 msgid "the commit is authored by me now (used with -C/-c/--amend)"
 msgstr "现在将该提交的作者改为我（和 -C/-c/--amend 参数共用）"
 
-#: builtin/commit.c:1419 builtin/log.c:1160 builtin/revert.c:111
+#: builtin/commit.c:1438 builtin/log.c:1160 builtin/revert.c:111
 msgid "add Signed-off-by:"
 msgstr "添加 Signed-off-by: 签名"
 
-#: builtin/commit.c:1420
+#: builtin/commit.c:1439
 msgid "use specified template file"
 msgstr "使用指定的模板文件"
 
-#: builtin/commit.c:1421
+#: builtin/commit.c:1440
 msgid "force edit of commit"
 msgstr "强制编辑提交"
 
 #  译者：可选值，不能翻译（或是原文中笔误，应为 mode）
-#: builtin/commit.c:1422
+#: builtin/commit.c:1441
 msgid "default"
 msgstr "default"
 
-#: builtin/commit.c:1422 builtin/tag.c:460
+#: builtin/commit.c:1441 builtin/tag.c:460
 msgid "how to strip spaces and #comments from message"
 msgstr "设置如何删除提交说明里的空格和#注释"
 
-#: builtin/commit.c:1423
+#: builtin/commit.c:1442
 msgid "include status in commit message template"
 msgstr "在提交说明模板里包含状态信息"
 
-#: builtin/commit.c:1424 builtin/merge.c:230 builtin/tag.c:461
+#: builtin/commit.c:1443 builtin/merge.c:230 builtin/tag.c:461
 msgid "key id"
 msgstr "key id"
 
-#: builtin/commit.c:1425 builtin/merge.c:231
+#: builtin/commit.c:1444 builtin/merge.c:231
 msgid "GPG sign commit"
 msgstr "GPG 提交签名"
 
 #. end commit message options
-#: builtin/commit.c:1428
+#: builtin/commit.c:1447
 msgid "Commit contents options"
 msgstr "提交内容选项"
 
-#: builtin/commit.c:1429
+#: builtin/commit.c:1448
 msgid "commit all changed files"
 msgstr "提交所有改动的文件"
 
-#: builtin/commit.c:1430
+#: builtin/commit.c:1449
 msgid "add specified files to index for commit"
 msgstr "添加指定的文件到索引区等待提交"
 
-#: builtin/commit.c:1431
+#: builtin/commit.c:1450
 msgid "interactively add files"
 msgstr "交互式添加文件"
 
-#: builtin/commit.c:1432
+#: builtin/commit.c:1451
 msgid "interactively add changes"
 msgstr "交互式添加变更"
 
-#: builtin/commit.c:1433
+#: builtin/commit.c:1452
 msgid "commit only specified files"
 msgstr "只提交指定的文件"
 
-#: builtin/commit.c:1434
+#: builtin/commit.c:1453
 msgid "bypass pre-commit hook"
 msgstr "绕过 pre-commit 钩子"
 
-#: builtin/commit.c:1435
+#: builtin/commit.c:1454
 msgid "show what would be committed"
 msgstr "显示将要提交的内容"
 
-#: builtin/commit.c:1446
+#: builtin/commit.c:1465
 msgid "amend previous commit"
 msgstr "修改先前的提交"
 
-#: builtin/commit.c:1447
+#: builtin/commit.c:1466
 msgid "bypass post-rewrite hook"
 msgstr "绕过 post-rewrite 钩子"
 
-#: builtin/commit.c:1452
+#: builtin/commit.c:1471
 msgid "ok to record an empty change"
 msgstr "允许一个空提交"
 
-#: builtin/commit.c:1455
+#: builtin/commit.c:1474
 msgid "ok to record a change with an empty message"
 msgstr "允许空的提交说明"
 
-#: builtin/commit.c:1488
+#: builtin/commit.c:1507
 msgid "could not parse HEAD commit"
 msgstr "不能解析 HEAD 提交"
 
-#: builtin/commit.c:1526 builtin/merge.c:525
+#: builtin/commit.c:1545 builtin/merge.c:525
 #, c-format
 msgid "could not open '%s' for reading"
 msgstr "不能为读入打开 '%s'"
 
-#: builtin/commit.c:1533
+#: builtin/commit.c:1552
 #, c-format
 msgid "Corrupt MERGE_HEAD file (%s)"
 msgstr "损坏的 MERGE_HEAD 文件（%s）"
 
-#: builtin/commit.c:1540
+#: builtin/commit.c:1559
 msgid "could not read MERGE_MODE"
 msgstr "不能读取 MERGE_MODE"
 
-#: builtin/commit.c:1559
+#: builtin/commit.c:1578
 #, c-format
 msgid "could not read commit message: %s"
 msgstr "不能读取提交说明：%s"
 
-#: builtin/commit.c:1573
+#: builtin/commit.c:1592
 #, c-format
 msgid "Aborting commit; you did not edit the message.\n"
 msgstr "终止提交；您未更改来自模版的提交说明。\n"
 
-#: builtin/commit.c:1578
+#: builtin/commit.c:1597
 #, c-format
 msgid "Aborting commit due to empty commit message.\n"
 msgstr "终止提交因为提交说明为空。\n"
 
-#: builtin/commit.c:1593 builtin/merge.c:861 builtin/merge.c:886
+#: builtin/commit.c:1612 builtin/merge.c:861 builtin/merge.c:886
 msgid "failed to write commit object"
 msgstr "无法写提交对象"
 
-#: builtin/commit.c:1614
+#: builtin/commit.c:1633
 msgid "cannot lock HEAD ref"
 msgstr "无法锁定 HEAD 引用"
 
-#: builtin/commit.c:1618
+#: builtin/commit.c:1637
 msgid "cannot update HEAD ref"
 msgstr "无法更新 HEAD 引用"
 
-#: builtin/commit.c:1629
+#: builtin/commit.c:1648
 msgid ""
 "Repository has been updated, but unable to write\n"
 "new_index file. Check that disk is not full or quota is\n"
@@ -9722,7 +9740,7 @@ msgstr "无法保存 $stash_sha1"
 msgid ""
 "Applying autostash resulted in conflicts.\n"
 "Your changes are safe in the stash.\n"
-"You can run \"git stash pop\" or \"git stash drop\" it at any time.\n"
+"You can run \"git stash pop\" or \"git stash drop\" at any time.\n"
 msgstr ""
 "应用 autostash 导致冲突。\n"
 "您的修改安全地保存在 stash 中。\n"
-- 
2.11.4.GIT