worktree: teach "add" to check out existing branches
[git.git] / Documentation / git-rm.txt
blobb5c46223c44b1b17673ae4782f74528b3d151bed
1 git-rm(1)
2 =========
4 NAME
5 ----
6 git-rm - Remove files from the working tree and from the index
8 SYNOPSIS
9 --------
10 [verse]
11 'git rm' [-f | --force] [-n] [-r] [--cached] [--ignore-unmatch] [--quiet] [--] <file>...
13 DESCRIPTION
14 -----------
15 Remove files from the index, or from the working tree and the index.
16 `git rm` will not remove a file from just your working directory.
17 (There is no option to remove a file only from the working tree
18 and yet keep it in the index; use `/bin/rm` if you want to do that.)
19 The files being removed have to be identical to the tip of the branch,
20 and no updates to their contents can be staged in the index,
21 though that default behavior can be overridden with the `-f` option.
22 When `--cached` is given, the staged content has to
23 match either the tip of the branch or the file on disk,
24 allowing the file to be removed from just the index.
27 OPTIONS
28 -------
29 <file>...::
30         Files to remove.  Fileglobs (e.g. `*.c`) can be given to
31         remove all matching files.  If you want Git to expand
32         file glob characters, you may need to shell-escape them.
33         A leading directory name
34         (e.g. `dir` to remove `dir/file1` and `dir/file2`) can be
35         given to remove all files in the directory, and recursively
36         all sub-directories,
37         but this requires the `-r` option to be explicitly given.
39 -f::
40 --force::
41         Override the up-to-date check.
43 -n::
44 --dry-run::
45         Don't actually remove any file(s).  Instead, just show
46         if they exist in the index and would otherwise be removed
47         by the command.
49 -r::
50         Allow recursive removal when a leading directory name is
51         given.
53 \--::
54         This option can be used to separate command-line options from
55         the list of files, (useful when filenames might be mistaken
56         for command-line options).
58 --cached::
59         Use this option to unstage and remove paths only from the index.
60         Working tree files, whether modified or not, will be
61         left alone.
63 --ignore-unmatch::
64         Exit with a zero status even if no files matched.
66 -q::
67 --quiet::
68         `git rm` normally outputs one line (in the form of an `rm` command)
69         for each file removed. This option suppresses that output.
72 DISCUSSION
73 ----------
75 The <file> list given to the command can be exact pathnames,
76 file glob patterns, or leading directory names.  The command
77 removes only the paths that are known to Git.  Giving the name of
78 a file that you have not told Git about does not remove that file.
80 File globbing matches across directory boundaries.  Thus, given
81 two directories `d` and `d2`, there is a difference between
82 using `git rm 'd*'` and `git rm 'd/*'`, as the former will
83 also remove all of directory `d2`.
85 REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM
86 --------------------------------------------------------
87 There is no option for `git rm` to remove from the index only
88 the paths that have disappeared from the filesystem. However,
89 depending on the use case, there are several ways that can be
90 done.
92 Using ``git commit -a''
93 ~~~~~~~~~~~~~~~~~~~~~~~
94 If you intend that your next commit should record all modifications
95 of tracked files in the working tree and record all removals of
96 files that have been removed from the working tree with `rm`
97 (as opposed to `git rm`), use `git commit -a`, as it will
98 automatically notice and record all removals.  You can also have a
99 similar effect without committing by using `git add -u`.
101 Using ``git add -A''
102 ~~~~~~~~~~~~~~~~~~~~
103 When accepting a new code drop for a vendor branch, you probably
104 want to record both the removal of paths and additions of new paths
105 as well as modifications of existing paths.
107 Typically you would first remove all tracked files from the working
108 tree using this command:
110 ----------------
111 git ls-files -z | xargs -0 rm -f
112 ----------------
114 and then untar the new code in the working tree. Alternately
115 you could 'rsync' the changes into the working tree.
117 After that, the easiest way to record all removals, additions, and
118 modifications in the working tree is:
120 ----------------
121 git add -A
122 ----------------
124 See linkgit:git-add[1].
126 Other ways
127 ~~~~~~~~~~
128 If all you really want to do is to remove from the index the files
129 that are no longer present in the working tree (perhaps because
130 your working tree is dirty so that you cannot use `git commit -a`),
131 use the following command:
133 ----------------
134 git diff --name-only --diff-filter=D -z | xargs -0 git rm --cached
135 ----------------
137 SUBMODULES
138 ----------
139 Only submodules using a gitfile (which means they were cloned
140 with a Git version 1.7.8 or newer) will be removed from the work
141 tree, as their repository lives inside the .git directory of the
142 superproject. If a submodule (or one of those nested inside it)
143 still uses a .git directory, `git rm` will move the submodules
144 git directory into the superprojects git directory to protect
145 the submodule's history. If it exists the submodule.<name> section
146 in the linkgit:gitmodules[5] file will also be removed and that file
147 will be staged (unless --cached or -n are used).
149 A submodule is considered up to date when the HEAD is the same as
150 recorded in the index, no tracked files are modified and no untracked
151 files that aren't ignored are present in the submodules work tree.
152 Ignored files are deemed expendable and won't stop a submodule's work
153 tree from being removed.
155 If you only want to remove the local checkout of a submodule from your
156 work tree without committing the removal, use linkgit:git-submodule[1] `deinit`
157 instead. Also see linkgit:gitsubmodules[7] for details on submodule removal.
159 EXAMPLES
160 --------
161 `git rm Documentation/\*.txt`::
162         Removes all `*.txt` files from the index that are under the
163         `Documentation` directory and any of its subdirectories.
165 Note that the asterisk `*` is quoted from the shell in this
166 example; this lets Git, and not the shell, expand the pathnames
167 of files and subdirectories under the `Documentation/` directory.
169 `git rm -f git-*.sh`::
170         Because this example lets the shell expand the asterisk
171         (i.e. you are listing the files explicitly), it
172         does not remove `subdir/git-foo.sh`.
174 BUGS
175 ----
176 Each time a superproject update removes a populated submodule
177 (e.g. when switching between commits before and after the removal) a
178 stale submodule checkout will remain in the old location. Removing the
179 old directory is only safe when it uses a gitfile, as otherwise the
180 history of the submodule will be deleted too. This step will be
181 obsolete when recursive submodule update has been implemented.
183 SEE ALSO
184 --------
185 linkgit:git-add[1]
189 Part of the linkgit:git[1] suite